Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS2007

Mapping and vessel-based capabilities

U.S. Geological Survey (USGS) scientists from the Florida Integrated Science Center (FISC) conduct scientific investigations of submerged coastal and marine resources using new and existing technologies. Each contributing technique, method, or product adds to our understanding of coastal and marine resources and provides information for resource-management decisionmaking. In support of this mission, the USGS St. Petersburg office maintains a fleet of research vessels used for inland, coastal, and open-water marine surveys and investigations. Each vessel has advantages and limitations related to water depth, carrying capacity, speed, operation in open water, and other functions. These research platforms are staffed by experienced technical and scientific professionals with expertise in marine navigation, geology, geophysics, engineering, biology, and oceanography.

Fact Sheet↗
USGS1992

Maps showing mineral resource assessment for skarn deposits of gold, silver, copper, tungsten, and iron in the Butte 1 degree by 2 degrees Quadrangle, Montana

The purpose of this report is to assess the potential for undiscovered skarn deposits of gold, silver, copper, tungsten, and iron in the Butte 1 °X2° quadrangle. Other deposit types have been assessed and reports for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, ·manganese, and tungsten; porphyry-stockwork deposits of copper, molybdenum, and tungsten; stockwork-disseminated deposits of gold and silver; placer deposits of gold; and miscellaneous deposit types including strata-bound deposits of copper and silver in rocks of the Middle Proterozoic Belt Supergroup, phosphate deposits in the Permian Phosporia Formation, and deposits of barite and fluorite. The Butte quadrangle, in west-central Montana, is one of the most mineralized and productive mining regions in the U.S. Its mining districts, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in resource assessment include a compilation of all data into data sets, the development of an occurrence model for skarn deposits in the quadrangle, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of a number of reports and maps on the Butte 1 °X2° quadrangle. Other publications resulting from this study include U.S. Geological Survey (USGS) Miscellaneous Investigations Series Maps 1-2050-A (Rowan and Segal, 1989), 1-2050-B (Rowan and others, 1991), 1-2050-D (Elliott and others, in press); Miscellaneous Field Studies Map MF-1925 (Wallace, 1987a); and Open-File Reports OF-86-292 (Wallace and others, 1986) and OF-86-0632 (Elliott and others, 1986).

IMAP↗
USGS1993

Mineral resource assessment of rare-earth elements, thorium, titanium, and uranium in the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina

Mineral resources of the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina, were assessed between 1984 and 1990 under the Conterminuous United States Mineral Assessment Program (CUSMAP) of the U.S. Geological Survey (USGS). The mineral resource assessments were made on the basis of geologic, geochemical, and geophysical investigations and the presence of mines, prospects, and mineral occurrences from the literature. This report is an assessment of the rare-earth elements (REE), thorium, titanium, and uranium resources in the Greenville quadrangle and is based on heavy mineral concentrates collected in 1951-54 by the USGS (Overstreet and others, 1968; Caldwell and White, 1973; Cuppels and White, 1973); on the results of the U.S. Department of Energy, National Uranium Resource Evaluation (NURE) sampling program (Ferguson, 1978, 1979); on analyses of stream-sediment and heavy-mineral-concentrate samples (Jackson and Moore, 1992, G.C Cullin, USGS, unpub. data, 1992) on maps showing aerial gamma radiation in the Greenville quadrangle (D.L. Daniels, USGS, unpub. data, 1992); and on the geology as mapped by Nelson and others (1987, 1989).

Georgia, North Carolina, South Carolina↗
USGS1987

Surface-geophysical investigations in Melton Valley, Oak Ridge Reservation, Tennessee

Surface geophysical methods were found to be valuable for refining knowledge of the geohydrology of Melton Valley, an area used for burial of low-level radioactive waste at the Oak Ridge Reservation in Tennessee. The valley is characterized by locally complex geologic structures in lithologies of interbedded shale and limestone. Radionuclides have been transported away from the burial areas by groundwater along paths that are, in part, controlled by geologic structures and rock type. Direct current resistivity soundings were used to determine the depth to bedrock and to aid in the delineation of subsurface stratigraphy. Depth to bedrock, as indicated by an increase in resistivity in the interpreted geoelectric layering, was compared to auger-hole data at five sites, where bedrock depths ranged from 1 to 14 ft and were within 3 ft at four sites. The subsurface contact between shale and limestone was indicated by an increase in model calculated resistivity from < 100 to > 150 ohm-meters at four different sites. Terrain conductivity profiles were used to aid in mapping surficial geologic contacts between shale and limestone units. Terrain conductivity for shale at 33-ft coil separation was generally greater than 15 millimhos/m and ranged from about 10 to 40 millimhos/m. Conductivity for limestone was generally < 15 millimhos/m and ranged from 5 to 25 millimhos/m. Azimuthal conductivity surveys indicated that conductivity was generally greatest when the transmitter and receiver coils were oriented parallel to strike. This anisotropy in terrain conductivity shows the need to keep the coil orientation consistent throughout the length of a profile. (Author 's abstract)

Tennessee↗
USGS2007

Geophysical Data from Spring Valley to Delamar Valley, East-Central Nevada

Cenozoic basins in eastern Nevada and western Utah constitute major ground-water recharge areas in the eastern part of the Great Basin and these were investigated to characterize the geologic framework of the region. Prior to these investigations, regional gravity coverage was variable over the region, adequate in some areas and very sparse in others. Cooperative studies described herein have established 1,447 new gravity stations in the region, providing a detailed description of density variations in the middle to upper crust. All previously available gravity data for the study area were evaluated to determine their reliability, prior to combining with our recent results and calculating an up-to-date isostatic residual gravity map of the area. A gravity inversion method was used to calculate depths to pre-Cenozoic basement rock and estimates of maximum alluvial/volcanic fill in the major valleys of the study area. The enhanced gravity coverage and the incorporation of lithologic information from several deep oil and gas wells yields a much improved view of subsurface shapes of these basins and provides insights useful for the development of hydrogeologic models for the region.

Open-File Report↗
USGS2002

Three-dimensional measurements of flow in uncased wells completed in basalt, Mountain Home Air Force Base, Idaho, March 2000

Several ground-water monitoring wells on the Mountain Home Air Force Base in southwestern Idaho were constructed in February 2000 to replace existing monitoring wells that became ineffective as a result of declining water levels. Upon completion of the replacement wells, borehole geophysical logs were collected, including natural gamma radiation, electromagnetic induction, caliper, fluid temperature, and resistivity. A prototype borehole acoustic doppler velocimeter (B-ADV) was used to make experimental three-dimensional measurements of lateral and vertical flow in two of the replacement wells, MW11–2 and MW3–2, each 450 feet deep, to better understand ground-water flow in the basalt underlying this area. Measurements indicated two independent flow zones in each well: unit B, from about 380 to about 415 feet below land surface, and unit C, from about 415 to about 430 feet below land surface. In each well, direction of flow in unit B was north-northwest toward Canyon Creek and, in unit C, south-southwest toward the Snake River. Measurements also indicated downward intraborehole flow in both wells. Unit B appeared to represent a local-scale flow regime; unit C appeared to represent a regional flow regime. This information suggests the existence of a complex three-dimensional hydrogeologic setting that cannot be discriminated easily on conventional waterlevel maps. Although data from only two wells are insufficient to construct a conceptual model of the ground-water flow regime, these experimental results demonstrate the capability of the B-ADV to obtain detailed flow measurements that, combined with data from other types of geophysical logs, discrete measurements of hydraulic head, and water chemistry, would aid in future studies and management of the ground-water resources, including contaminant transport and remediation.

Idaho↗
USGS2023

Yellowstone Volcano Observatory 2022 annual report

The Yellowstone Volcano Observatory (YVO) monitors volcanic and hydrothermal activity associated with the Yellowstone magmatic system, carries out research into magmatic processes occurring beneath Yellowstone Caldera, and issues timely warnings and guidance related to potential future geologic hazards. This report summarizes the activities and findings of YVO during the year 2022, focusing on the Yellowstone volcanic system. Highlights of YVO research and related activities during 2022 include deployments of seismometers in Norris Geyser Basin and Upper Geyser Basin to investigate interactions between hydrothermal features and influences from external influences, geological studies of post-glacial hydrothermal activity, refining the ages of Yellowstone volcanic units and updating existing maps of geologic deposits, new mapping of ash-flow deposits on the Sour Creek dome, installation of a new continuous gas monitoring station near Mud Volcano, sampling of gas emissions and thermal waters around Yellowstone National Park to monitor water chemistry over space and time, research into the age and history of Steamboat Geyser in Norris Geyser Basin, and assessment of thermal output based on satellite imagery and chloride flux in rivers. The most noteworthy event of the year was not geophysical, but meteorological. Combined runoff from rain and snowmelt caused substantial flooding in Yellowstone National Park, which caused damage to park roads and infrastructure. Steamboat Geyser, in Norris Geyser Basin, continued the pattern of frequent eruptions that began in 2018 with 11 water eruptions in 2022, the lowest number of annual eruptions in the current eruptive sequence. Total seismicity—2,429 located earthquakes—was slightly less than the 2,773 earthquakes located in 2021 and at the upper end of the historical average range of about 1,500–2,500 earthquakes per year. Overall subsidence of the caldera floor, ongoing since late 2015 or early 2016, continued at rates of a few centimeters (1–2 inches) per year. Satellite deformation measurements indicated the possibility of slight uplift amounting to about 1 centimeter (less than 1 inch) along the north caldera rim in 2021, but satellite data spanning 2022 show no uplift in that area. Throughout 2022, the aviation color code for Yellowstone Caldera remained at “green” and the volcano alert level remained at “normal.”

Wyoming↗
USGS1993

Maps showing mineral resource assessment for porphyry and stockwork deposits of copper, molybdenum, and tungsten and for stockwork and disseminated deposits of gold and silver in the Butte 1° x 2° quadrangle, Montana

This report documents the assessment for potential occurrences of undiscovered porphyry and stockwork deposits of copper, molybdenum, and tungsten (porphyry Cu-Mo-W) and stockwork and disseminated deposits of gold and silver (disseminated Au-Ag) in the Butte 1 °X2° quadrangle. The Butte quadrangle, in west-central Montana, is one of the best known mineral producing regions in the U.S. Mining districts in the quadrangle, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in this resource assessment for porphyry Cu-Mo-W and disseminated Au-Ag deposits in the quadrangle include a compilation of all data, the development of descriptive occurrence models, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of several maps on the Butte 1 °X2° quadrangle. Other deposit types have been assessed for the Butte quadrangle, and maps (U.S. Geological Survey (USGS) Miscellaneous Investigation Series Maps) for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, manganese, and tungsten (Elliott, Wallace, and others, 1992a) and skarn deposits of gold, silver, copper, tungsten, and iron (Elliott and others, 1992b ). Other publications resulting from this study include linear features map (Rowan and others, 1991 ); limonite and hydrothermal alteration map (Rowan and Segal, 1989); mineral occurrence maps (Elliott and others, 1986; Elliott, Loen, and others, 1992); and geologic maps (Wallace, 1987; Wallace and others, 1987).

Montana↗
USGS2008

A geophysical investigation of shallow deformation along an anomalous section of the Wasatch fault zone, Utah, USA

We report the results of a geophysical study of the Wasatch fault zone near the Provo and Salt Lake City segment boundary. This area is anomalous because the fault zone strikes more east-west than north-south. Vibroseis was used to record a common mid-point (CMP) profile that provides information to depths of ???500 m. A tomographic velocity model, derived from first breaks, constrained source and receiver static corrections; this was required due to complex terrain and significant lateral velocity contrasts. The profile reveals an ???250-m-wide graben in the hanging wall of the main fault that is associated with both synthetic and antithetic faults. Faults defined by apparent reflector offsets propagate upward toward topographic gradients. Faults mapped from a nearby trench and the seismic profile also appear to correlate with topographic alignments on LiDAR gradient maps. The faults as measured in the trench show a wide range of apparent dips, 20??-90??, and appear to steepen with depth on the seismic section. Although the fault zone is likely composed of numerous small faults, the broad asymmetric structure in the hanging wall is fairly simple and dominated by two inward-facing ruptures. Our results indicate the feasibility of mapping fault zones in rugged terrain and complex near-surface geology using low-frequency vibroseis. Further, the integration of geologic mapping and seismic reflection can extend surface observations in areas where structural deformation is obscured by poorly stratified or otherwise unmappable deposits. Therefore, the vibroseis technique, when integrated with geological information, provides constraints for assessing geologic hazards in areas of potential development.

Conference Paper↗
USGS1990

Hydrogeology of aquifers in Cretaceous and younger rocks in the vicinity of Onslow and southern Jones counties, North Carolina

Unconsolidated sediments in Onslow and Jones Counties, North Carolina overlie crystalline basement rocks and range in thickness from about 700 ft to more than 1,800 ft, thickening toward the east. This material is composed of permeable sand and limestone interlayered with relatively impermeable clay and silt beds. Sediments are divided into two groups: aquifers in Quaternary-, and Tertiary-aged rocks and aquifers in Cretaceous-aged rocks. Aquifers in the Cretaceous rocks provide most of the groundwater for public supplies and are the focus of this report. The aquifers in Cretaceous rocks are the Peedee, Black Creek, upper Cape Fear, and lower Cape Fear aquifers, which are composed of beds or groups of beds of sand and gravel. Each aquifer is overlain by a clay and silt bed, that impedes the flow of water between aquifers. The thickness of Cretaceous hydrogeologic units ranges from about 700 ft to more than 1, 300 ft. Hydrogeologic units are correlated using 60 geophysical logs and accompanying drillers ' logs along with water level and water quality data. Three hydrogeologic sections demonstrate the continuity of the aquifers and confining units, show water levels and chloride concentration in water from test intervals, and delineate where chloride concentration in water exceeds 250 mg/L within each aquifer. Maps of each aquifer in Cretaceous rocks show altitude of its top, thickness, sand percentage, and the transition from freshwater to saltwater. Maps of the confining units show thickness and sand percentage of each.

North Carolina↗
USGS2011

The magnitude distribution of earthquakes near Southern California faults

We investigate seismicity near faults in the Southern California Earthquake Center Community Fault Model. We search for anomalously large events that might be signs of a characteristic earthquake distribution. We find that seismicity near major fault zones in Southern California is well modeled by a Gutenberg-Richter distribution, with no evidence of characteristic earthquakes within the resolution limits of the modern instrumental catalog. However, the b value of the locally observed magnitude distribution is found to depend on distance to the nearest mapped fault segment, which suggests that earthquakes nucleating near major faults are likely to have larger magnitudes relative to earthquakes nucleating far from major faults. Copyright 2011 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS1984

Evaluation of the ground-water resources of coastal Georgia: preliminary report of the data available as of July 1983

A compilation of ground-water data that have been collected for nearly 100 years in the coastal area of Georgia is presented in this report. The compilation of pertinent data indicates what information is available for use in the evaluation of the ground-water resources of the 13 counties of coastal Georgia. Also included in this report is a fairly complete discussion of previous and ongoing investigations and monitoring networks, and an extensive list of references. Maps at 1:24,000 and 1:1,000,000 scales contain well locations and identifiers for all wells in the Ground Water Site Inventory (GWSI) data base of the National Water Data Storage and retrieval System (WATSTORE). Tabular summaries of selected site information from GWSI, including well identifiers and names, latitude-longitude location, depth of well, altitude of land surface, and use of water are presented. Water-use data from the National Water Use Data System, and water use for irrigation from the University of Georgia, Department of Agriculture survey, also are tabulated. Also included are pertinent information on geophysical surveys and data obtained, and proposed project activities, particularly test-monitor well drilling. The data in this report were collected and compiled as part of the cooperative activities between the U.S. Geological Survey and other agencies.

Georgia↗
USGS1984

Evaluation of the ground-water resources of coastal Georgia; preliminary report on the data available as of July 1983

A compilation of ground-water data that have been collected for nearly 100 years in the coastal area of Georgia as part of cooperative activities between the U.S. Geological Survey and other agencies is presented in this report. The compilation of pertinent data indicates that information is available for use in the evaluation of the ground-water resources of the 13 counties of coastal Georgia. Included in this report is a fairly complete discussion of previous and ongoing investigations and monitoring networks, and an extensive list of references. Maps at 1:24,000, 1:100,000; and 1:1000,000 scales contain well locations and identifers for all wells in the Ground Water Site Inventory (GWSI) data base of the National Water Data Storage and Retrieval System (WATSTORE). Tabular summaries of selected site information from GWSI, including well identifiers and names , latitude-longitude location, depth of well, altitude of land surface, and use of water are presented. Water-use data from the National Water Use Data System, and water use for irrigation from the University of Georgia, Department of Agriculture survey , are tabulated. Also included are pertinent information on geophysical surveys and data obtained, and proposed project activities, particularly test-monitor well drilling.

Georgia↗
USGS2007

Quantitative analysis of scale of aeromagnetic data raises questions about geologic-map scale

A recently published study has shown that small-scale geologic map data can reproduce mineral assessments made with considerably larger scale data. This result contradicts conventional wisdom about the importance of scale in mineral exploration, at least for regional studies. In order to formally investigate aspects of scale, a weights-of-evidence analysis using known gold occurrences and deposits in the Central Lapland Greenstone Belt of Finland as training sites provided a test of the predictive power of the aeromagnetic data. These orogenic-mesothermal-type gold occurrences and deposits have strong lithologic and structural controls associated with long (up to several kilometers), narrow (up to hundreds of meters) hydrothermal alteration zones with associated magnetic lows. The aeromagnetic data were processed using conventional geophysical methods of successive upward continuation simulating terrane clearance or 'flight height' from the original 30 m to an artificial 2000 m. The analyses show, as expected, that the predictive power of aeromagnetic data, as measured by the weights-of-evidence contrast, decreases with increasing flight height. Interestingly, the Moran autocorrelation of aeromagnetic data representing differing flight height, that is spatial scales, decreases with decreasing resolution of source data. The Moran autocorrelation coefficient scems to be another measure of the quality of the aeromagnetic data for predicting exploration targets. ?? Springer Science+Business Media, LLC 2007.

Natural Resources Research↗
USGS1999

Surface-geophysical investigation of the University of Connecticut landfill, Storrs, Connecticut

A surface-geophysical investigation of the former landfill area at the University of Connecticut in Storrs, Conn. was conducted as part of a preliminary hydrogeologic assessment of the contamination of soil, surface water, and ground water at the site. Geophysical data were used to help determine the dominant direction of fracture strike; subsurface structure of the landfill; locations of possible leachate plumes, fracture zones or conductive lithologic layers; and the location and number of chemical waste-disposal pits. Azimuthal square-array direct-current (dc) resistivity, two-dimensional (2D) dc-resistivity, inductive terrain conductivity, and ground-penetrating radar (GPR) were the methods used to characterize the landfill area.The dominant strike direction of bedrock fractures interpreted from azimuthal square-array resistivity data is north, ranging from 285 to 30 degrees east of True North. These results complement local geologic maps that identify bedrock foliation and fractures that strike approximately north-south and dip 30 to 40 degrees west.The subsurface structure of the landfill was imaged with 2D dc-resistivity profiling data, which were used to interpret a landfill thickness of 10 to 15 meters. Orientation of the landfill trash disposal trenches were detected by azimuthal square-array resistivity soundings; the dimension and the orientation of the trenches were verified by aerial photographs.Inductive terrain conductivity and 2D dc-resistivity profiling detected conductive anomalies that were interpreted as possible leachate plumes near two surface-water discharge areas. The conductive anomaly to the north of the landfill is interpreted to be a shallow leachate plume and dissipates to almost background levels 45 meters north of the landfill. The anomaly to the southwest is interpreted to extend vertically through the overburden and into the shallow bedrock and laterally along the intermittent drainage to Eagleville Brook, terminating 140 meters south of the landfill. Inductive terrain conductivity and 2D dc-resistivity profiling also detected two dipping, sheet-like conductive features that extend vertically into the bedrock. These features were interpreted either as fracture zones filled with conductive fluids or conductive lithologic layers between more resistive layers. One dipping conductive feature was detected south of the landfill, and the other feature was detected to the west of the former chemical waste-disposal pits. Both anomalies strike approximately north-south and dip about 30 degrees to the west.GPR was used unsuccessfully to locate the former chemical waste-disposal pits. Although the entire overburden and the upper few meters of bedrock were imaged, no anomalous features were detected with GPR that could be correlated with the pits. It is possible that the area surveyed by GPR was entirely backfilled after the soil was removed from the site and that the outline of the former chemical waste-disposal pits no longer exists.

Connecticut↗
USGS2010

Silica in a Mars analog environment: Ka u Desert, Kilauea Volcano, Hawaii

Airborne Visible/Near-Infrared Imaging Spectrometer (AVIRIS) data acquired over the Ka u Desert are atmospherically corrected to ground reflectance and used to identify the mineralogic components of relatively young basaltic materials, including 250-700 and 200-400 year old lava flows, 1971 and 1974 flows, ash deposits, and solfatara incrustations. To provide context, a geologic surface units map is constructed, verified with field observations, and supported by laboratory analyses. AVIRIS spectral endmembers are identified in the visible (0.4 to 1.2 ??m) and short wave infrared (2.0 to 2.5 ??m) wavelength ranges. Nearly all the spectral variability is controlled by the presence of ferrous and ferric iron in such minerals as pyroxene, olivine, hematite, goethite, and poorly crystalline iron oxides or glass. A broad, nearly ubiquitous absorption feature centered at 2.25 ??m is attributed to opaline (amorphous, hydrated) silica and is found to correlate spatially with mapped geologic surface units. Laboratory analyses show the silica to be consistently present as a deposited phase, including incrustations downwind from solfatara vents, cementing agent for ash duricrusts, and thin coatings on the youngest lava flow surfaces. A second, Ti-rich upper coating on young flows also influences spectral behavior. This study demonstrates that secondary silica is mobile in the Ka u Desert on a variety of time scales and spatial domains. The investigation from remote, field, and laboratory perspectives also mimics exploration of Mars using orbital and landed missions, with important implications for spectral characterization of coated basalts and formation of opaline silica in arid, acidic alteration environments. Copyright 2010 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2006

Two-dimensional magnetotelluric model of deep resistivity structure in the Bodie-Aurora district of California

Introduction: Magnetotelluric data were acquired during October 2001 by the U.S. Geological Survey (USGS) as part of a study to examine the structural nature of basins in the transition zone between the Sierra Nevada Mountains of California and the Basin and Range province of Nevada. Magnetotelluric (MT) geophysical studies assist the mapping of geologic structure and the inference of lithologic packages that are concealed beneath the Earth's surface. The Basin and Range province has a complicated geologic history, which includes extension and compression of the Earth's crust to form the basins and ranges that blanket much of Nevada. The basins and ranges in the vicinity of this study trend northeastward and are bounded by steeply dipping strike slip faults. Interestingly, deep east-west magnetic trends occur in the aeromagnetic data of this study area indicating that the northeast-trending basins and ranges represent only thin-skinned deformation at the surface with an underlying east-west structure. To investigate this issue, MT data were acquired at seven stations in eastern California, 20 km east of Mono Lake. The purpose of this report is to present a two-dimensional apparent resistivity model of the MT data acquired for this study.

Open-File Report↗
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗