SEARCH · Search USGS

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

USGS2016

Landscape effects of wildfire on permafrost distribution in interior Alaska derived from remote sensing

Climate change coupled with an intensifying wildfire regime is becoming an important driver of permafrost loss and ecosystem change in the northern boreal forest. There is a growing need to understand the effects of fire on the spatial distribution of permafrost and its associated ecological consequences. We focus on the effects of fire a decade after disturbance in a rocky upland landscape in the interior Alaskan boreal forest. Our main objectives were to (1) map near-surface permafrost distribution and drainage classes and (2) analyze the controls over landscape-scale patterns of post-fire permafrost degradation. Relationships among remote sensing variables and field-based data on soil properties (temperature, moisture, organic layer thickness) and vegetation (plant community composition) were analyzed using correlation, regression, and ordination analyses. The remote sensing data we considered included spectral indices from optical datasets (Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Landsat 8 Operational Land Imager (OLI)), the principal components of a time series of radar backscatter (Advanced Land Observing Satellite—Phased Array type L-band Synthetic Aperture Radar (ALOS-PALSAR)), and topographic variables from a Light Detection and Ranging (LiDAR)-derived digital elevation model (DEM). We found strong empirical relationships between the normalized difference infrared index (NDII) and post-fire vegetation, soil moisture, and soil temperature, enabling us to indirectly map permafrost status and drainage class using regression-based models. The thickness of the insulating surface organic layer after fire, a measure of burn severity, was an important control over the extent of permafrost degradation. According to our classifications, 90% of the area considered to have experienced high severity burn (using the difference normalized burn ratio (dNBR)) lacked permafrost after fire. Permafrost thaw, in turn, likely increased drainage and resulted in drier surface soils. Burn severity also influenced plant community composition, which was tightly linked to soil temperature and moisture. Overall, interactions between burn severity, topography, and vegetation appear to control the distribution of near-surface permafrost and associated drainage conditions after disturbance.

Alaska↗

USGS2015

Geologic map of Tooting crater, Amazonis Planitia region of Mars

Tooting crater has a diameter of 27.2 km, and formed on virtually flat lava flows within Amazonis Planitia ~1,300 km west of the summit of Olympus Mons volcano, where there appear to have been no other major topographic features prior to the impact. The crater formed in an area ~185 x 135 km that is at an elevation between −3,870 m and −3,874 m relative to the Mars Orbiter Laser Altimeter (MOLA) Mars datum. This fortuitous situation (for example, a bland, horizontal target) allows the geometry of the crater and the thickness of the ejecta blanket to be accurately determined by subtracting the appropriate elevation of the surrounding landscape (−3,872 m) from the individual MOLA measurements across the crater. Thus, for the first time, it is possible to determine the radial decrease of ejecta thickness as a function of distance away from the rim crest. On the basis of the four discrete ejecta layers surrounding the crater cavity, Tooting crater is classified as a Multiple-Layered Ejecta (MLE) crater. By virtue of the asymmetric distribution of secondary craters and the greater thickness of ejecta to the northeast, Morris and others (2010) proposed that Tooting crater formed by an oblique impact from the southwest. The maximum range of blocks that produced identifiable secondary craters is ~500 km (~36.0 crater radii) from the northeast rim crest. In contrast, secondary craters are only identifiable ~215 km (15.8 radii) to the southeast and 225 km (16.5 radii) to the west.

Scientific Investigations Map↗

USGS2001

Potentiometric Surface of the Aquia Aquifer in Southern Maryland, September 1999

This report presents a map showing the potentiometric surface of the Aquia aquifer in the Aquia Formation of Paleocene age in Southern Maryland during September 1999. The map is based on water-level measurements in 85 wells. The potentiometric surface was above sea level near the northern boundary and outcrop area of the aquifer in a topographically high area of Anne Arundel County, and was below sea level in the remainder of the study area. The hydraulic gradient was directed southeastward toward an extensive cone of depression around well fields at Lexington Park and Solomons Island. Ground-water levels were more than 80 feet below sea level in a 100-square-mile area surrounding the deepest part of the cone of depression. A cone of depression formed in northern Calvert County due to pumpage at Chesapeake Beach and North Beach. The water level has declined to 43 feet below sea level in this area. The lowest measurement was 164 feet below sea level in a well near the center of the cone of depression at Lexington Park.

Open-File Report↗

USGS1986

River-quality assessment of the Truckee and Carson River system, California and Nevada: Hydrologic characteristics

A study of the Truckee and Carson Rivers was begun in October 1978 to assess the cause and effect relations between human and natural actions, and the quality of water at different times and places along the rivers. This report deals with the compilation of basic hydrologic data and the presentation of some of the new data collected during the study. Topographic, flow, and chemical data, data from recent time-of-travel studies, and new data on river mileages and drainage areas that were determined using new , high-resolution maps, are included. The report is a guide to locating maps, aerial photographs, computer files, and reports that relate to the rivers and their basins. It describes methods for compiling and expressing hydrologic information for ease of reading and understanding by the many users of water-related data. Text, tabular data, and colored plates with detailed maps and hydrographs are extensively cross referenced.

California, Nevada↗

USGS1995

Potentiometric surface of the Upper Floridan aquifer in the St. Johns River Water Management District and vicinity, Florida, September 1994

This map depicts the potentiometric surface of the Upper Floridan aquifer in the St. Johns River Water Management District and vicinity for September 1994. The map is based on water-level measurements made at more than 900 wells and springs. Ninety-two new wells were added to the September 1994 map--42 in southern Georgia and 50 in Florida. Data on the map were contoured using 5-foot contour intervals in most areas. The potentiometric surface of this karstic aquifer generally reflects land surface topography. Potentiometric-surface highs often correspond to topographic highs, which are areas of surficial recharge to the Upper Floridan aquifer. Springs within topographic lows along with areas of more diffuse upward leakage are natural zones of discharge. Municipal, agricultural, and industrial withdrawals have lowered the potentiometric surface in some areas. The potentiometric surface ranged from 131 feet above sea lvel in Polk County to 86 feet below sea level in southern Georgia near the St. Marys River. With the additon of new wells in southern Georgia, water level data now indicate two distinct depressions at industrial well fields near the St. Marys River in southern Georgia and eastern Nassau County where previously there was only one depression indicated. Water levels measured in September 1994 generally were about 0 to 4 feet higher than those measured in September 1993, except in Seminole County, where increases of 1 to 7 feet above September 1993 levels were recorded at most wells. Generally, September 1994 water levels were 1 to to 5 feet higher than levels in May 1994 except in Union, Gradford, Alachua, Levy, and western Marion Counties where levels remained nearly unchanged, and in Seminole and northwestern Orange Counties where water levels generally were 3 to 12 feet higher than levels in May 1994.

Florida↗

USGS1986

Mass storage estimates for the digital mapping era.

Proponents of the digital era recognize that a break-through in mass storage technology may be required to attain a reasonable degree of computerization of the cartographic mapping and data management process. This paper provides the rationale for estimating that about 1014 bits of digital mass storage are needed for developing a digital 1:24 000-scale topographic data base of the US. Also, it will discuss the optical disk as a leading candidate for handling the mass storage dilemma.-from Author

Photogrammetric Engineering and Remote Sensing↗

USGS2011

Geologic map of the Suquamish 7.5' quadrangle and part of the Seattle North 7.5' x 15' quadrangle, Kitsap County, Washington

The Suquamish 7.5' quadrangle is in the center of the Puget Lowland, Washington. The quadrangle contains the northern two-thirds of Bainbridge Island and adjacent parts of the Kitsap Peninsula. Puget Sound and contiguous waterways form 35 percent of the map area. Maximum elevation is 137 m in the northwest corner of the quadrangle, west of Suquamish; the modal elevation is 44 m. The center of the quadrangle is 20 km west-northwest of downtown Seattle. Winslow, in the southeast corner of the quadrangle, is a 35-minute ferry ride from Seattle. The Suquamish quadrangle lies within the Salish Lowland physiographic province (Haugerud, 2004), a broad region in the forearc of the Cascade Volcanic Arc that extends from south of Olympia, Washington, to north of Campbell River, British Columbia, and includes both the Puget Lowland of western Washington and the Georgia Depression of northwestern Washington and southwestern British Columbia. To the east are the Cascade Range and Coast Mountains; to the west is the outer-arc high of the Coast Ranges. The Salish Lowland is the locus of late Cenozoic subsidence: Jones (1996) indicates as much as 1 km of unconsolidated fill beneath some areas. The Lowland is crossed by east-west topographic highs formed by bedrock uplifts. A northern San Juan high divides the Lowland into Georgia Depression and Puget Lowland subprovinces. A southern high, which lies athwart the south end of Bainbridge Island immediately south of the map area, coincides with the Seattle Fault Zone along which uplift has brought Eocene rocks to elevations of 800-1,200 m, 8-10 km higher than equivalent strata in the floor of the Seattle structural basin that underlies central and northern Bainbridge Island and areas to the east (Brocher and others, 2001; Blakely and others, 2002). Deformation along the Seattle Fault appears to be driven by north-south shortening of the Cascade forearc (Wells and others, 1998). Pleistocene glacial deposits underlie most of the map area. Most extensive are the various members of the Vashon Drift, deposited in the Vashon stade of the Fraser Glaciation of Armstrong and others (1965) between about about 17,000 years ago. This study was undertaken in response to (1) awareness of the hazard posed by future earthquakes in the Seattle Fault Zone, at the south edge of the quadrangle, and the need to marshal geologic evidence for the rate and style of deformation; (2) increasing population on Bainbridge Island and consequent pressure on groundwater resources; (3) concern about landslide hazards; and (4) awareness of the role that the nearshore zone plays in supporting marine resources.

Washington↗

USGS2025

Evaluating Laramide orogenesis via flexural basin response in the San Juan basin, New Mexico and Colorado

A challenge in interpreting the location, timing, and magnitude of ancient orogenic events is that ongoing uplift and erosion in the hinterlands often destroys much of the primary record of these events. However, basin-thickness patterns in the sedimentary record can provide complimentary evidence of uplift via flexural effects. Here, we deploy well-log correlation, isochores, basin modeling, flexural modeling, and subcrop mapping to evaluate the Late Cretaceous to Paleogene basin response to Laramide tectonism in the San Juan basin. A wedge of upper Campanian to Maastrichtian sedimentary rock thickens from 200 to 800 meters from southeast to northwest in the basin. This pattern can be successfully simulated via flexural modeling if we infer early Laramide uplift along the northwest basin flank that produced a 0.8 km high topographic load. The Laramide unconformity bounds the top of this Upper Cretaceous sedimentary wedge and truncates progressively older strata to the east, further supporting a westward tilt of the basin. The onset of Campanian Laramide flexure may have also contributed to the profound transgression from the upper Menefee Formation to the Lewis Shale. The Paleocene isochore map displays an approximately symmetrical pattern, with thickening towards the center of the basin. This suggests the possibility of competing flexural loads. The base Eocene structure indicates an asymmetric deep on the northeast flank of the basin, providing flexural evidence of contemporaneous uplift/loading of the Nacimiento uplift and Archuleta arch; this has been modeled as ~2.1 km load height. Both Cretaceous and Paleocene sedimentary wedges are narrow, suggesting low flexural rigidity; modeled effective elastic thicknesses (EET) are 20-30 km, comparable to estimates of modern EET for the region.

Colorado, New Mexico↗

USGS2016

Continental Shelf Morphology and Stratigraphy Offshore San Onofre, CA: The Interplay Between Rates of Eustatic Change and Sediment Supply

New high-resolution CHIRP seismic data acquired offshore San Onofre, southern California reveal that shelf sediment distribution and thickness are primarily controlled by eustatic sea level rise and sediment supply. Throughout the majority of the study region, a prominent abrasion platform and associated shoreline cutoff are observed in the subsurface from ~ 72 to 53 m below present sea level. These erosional features appear to have formed between Melt Water Pulse 1A and Melt Water Pulse 1B, when the rate of sea-level rise was lower. There are three distinct sedimentary units mapped above a regional angular unconformity interpreted to be the Holocene transgressive surface in the seismic data. Unit I, the deepest unit, is interpreted as a lag deposit that infills a topographic low associated with an abrasion platform. Unit I thins seaward by downlap and pinches out landward against the shoreline cutoff. Unit II is a mid-shelf lag deposit formed from shallower eroded material and thins seaward by downlap and landward by onlap. The youngest, Unit III, is interpreted to represent modern sediment deposition. Faults in the study area do not appear to offset the transgressive surface. The Newport Inglewood/Rose Canyon fault system is active in other regions to the south (e.g., La Jolla) where it offsets the transgressive surface and creates seafloor relief. Several shoals observed along the transgressive surface could record minor deformation due to fault activity in the study area. Nevertheless, our preferred interpretation is that the shoals are regions more resistant to erosion during marine transgression. The Cristianitos fault zone also causes a shoaling of the transgressive surface. This may be from resistant antecedent topography due to an early phase of compression on the fault. The Cristianitos fault zone was previously defined as a down-to-the-north normal fault, but the folding and faulting architecture imaged in the CHIRP data are more consistent with a strike-slip fault with a down-to-the-northwest dip-slip component. A third area of shoaling is observed off of San Mateo and San Onofre creeks. This shoaling has a constructional component and could be a relict delta or beach structure. (C) 2015 Elsevier B.V. All rights reserved.

California↗

USGS2018

Coastal National Elevation Database

The Coastal National Elevation Database (CoNED) Applications Project develops enhanced topographic (land elevation) and bathymetric (water depth) datasets that serve as valuable resources for coastal hazards research (Danielson and others, 2016; Thatcher and others, 2016). These datasets are used widely for mapping inundation zones from riverine flood events, hurricanes, and sea-level rise and for other Earth science applications, such as sediment transport, erosion, and storm impact models. CoNED is a U.S. Geological Survey (USGS) Coastal-Marine Hazards and Resources Program (formerly Coastal and Marine Geology Program) activity centered at the USGS Earth Resources Observation and Science Center and distributed at other USGS Science Centers. As part of the vision for a 3D Nation, the CoNED Project is working collaboratively with the USGS National Geospatial Program, the National Oceanic and Atmospheric Administration, and the U.S. Army Corps of Engineers through the Interagency Working Group on Ocean and Coastal Mapping to build integrated elevation models in the coastal zone by assimilating the land surface topography with littoral zone and continental shelf bathymetry. Several nongovernmental organizations and Federal agencies, including the Department of the Interior Pacific Islands Climate Adaptation Science Center, the National Park Service, the Nature Conservancy, the Louisiana Coastal Protection and Restoration Authority, and numerous academic institutions, partner to make CoNED a success.

Fact Sheet↗

USGS2026

Ignimbrites of the Sour Creek dome, Yellowstone volcano, USA: Implications for the Lava Creek Tuff eruption and Yellowstone Caldera

Field observations plus sanidine compositional and 40 Ar/ 39 Ar age data collected on rocks from the Sour Creek dome (SCD) area of Yellowstone volcano (United States) serve to identify five new ignimbrite packages with ages (average 631.5 ± 0.9 ka) that are analytically indistinguishable from those of the Lava Creek Tuff (LCT), challenging the current framework of two LCT eruptive members. Newly recognized package 1 occurs as LCT-aged recycled clasts within a proximal lag breccia, reflecting a major time break in the LCT eruption sequence. Conformably above, the scoria-bearing ignimbrite of package 2 is extensively found in the dome, having been previously mis-mapped as Huck-leberry Ridge Tuff and LCT member A. To the south, package 3 is a crystal-rich, densely welded ignimbrite (inferred to be younger than package 2) that is conformably overlain by package 4, a fine-grained ignimbrite that contains abundant clasts of recycled tuff. Lastly, the topographically highest parts of the dome are made up of package 5, a multicomponent ignimbrite containing scoria, recycled clasts, and pumices, potentially correlative with package 2 and/or package 4. Cathodoluminescence imaging and zoning assessment was integrated with sanidine geochemistry from all five packages, including their recycled clasts. Four of the five packages were sourced from separate magmatic bodies within a larger plumbing system, each defined by their sanidine Ba distributions and componentry. Although the SCD was originally mapped as a resurgent dome and is actively deforming today, faults cutting the region show comparable offsets for NW-SE “resurgent faulting” as for orthogonal NE-SW faulting, the latter of which also cuts the 162 ka Elephant Back lava flow. We infer that faulting in the SCD well postdates eruption and that the SCD instead represents a domical accumulation of ignimbrite, not a resurgent structure. The abundance of recycled materials (and absence of Absaroka country rocks) in the SCD ignimbrites implies that vent locations were well inboard of the mapped caldera boundary, with some potentially along the line of the Yellowstone River, requiring a revision of the currently accepted LCT caldera outline. The LCT eruptive events were thus far more complex than currently recognized, with multiple deposits fed from multiple magma bodies over a time scale that cannot be resolved by radiometric dating.

Wyoming↗

USGS2013

Generalized surficial geologic map of the Fort Irwin Area, San Bernardino County, California

The geology and landscape of the Fort Irwin area, typical of many parts of the Mojave Desert, consist of rugged mountains separated by broad alluviated valleys that form the main coarse-resolution features of the geologic map. Crystalline and sedimentary rocks, Mesozoic and older in age, form most of the mountains with lesser accumulations of Miocene sedimentary and volcanic rocks. In detail, the area exhibits a fairly complex distribution of surficial deposits resulting from diverse rock sources and geomorphology that has been driven by topographic changes caused by recent and active faulting. Depositional environments span those typical of the Mojave Desert: alluvial fans on broad piedmonts, major intermittent streams along valley floors, eolian sand dunes and sheets, and playas in closed valleys that lack through-going washes. Erosional environments include rocky mountains, smooth gently sloping pediments, and badlands in readily eroded sediment. All parts of the landscape, from regional distribution of mountains, valleys, and faults to details of degree of soil development in surface materials, are portrayed by the surficial geologic map. Many of these attributes govern infiltration and recharge, and the surface distribution of permeable rock units such as Miocene sedimentary and volcanic rocks provides a basis for evaluating potential groundwater storage. Quaternary faults are widespread in the Fort Irwin area and include sinistral, east-striking faults that characterize the central swath of the area and the contrasting dextral, northwest-striking faults that border the east and west margins. Bedrock distribution and thickness of valley-fill deposits are controlled by modern and past faulting, and faults on the map help to identify targets for groundwater exploration.

California↗

USGS2021

Delineating the Pierre Shale from geophysical surveys within and near Ellsworth Air Force Base, South Dakota, 2019

The U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineering Center, investigated the use of surface geophysical methods to delineate the top of the Cretaceous Pierre Shale along survey transects in selected areas within and near Ellsworth Air Force Base, South Dakota. Two complementary geophysical methods—electrical resistivity and passive seismic—were used along 26 co-located transect surveys within and near Ellsworth Air Force Base for a total of 12.7 line-kilometers. Electrical resistivity results were analyzed using EarthImager2D electrical resistivity tomography processing and inversion software. Two-dimensional earth models showing the electrical properties of the subsurface were evaluated by directly comparing the high and low subsurface resistivity values to a surficial geologic map and nearby wells with driller logs. Passive seismic data were analyzed using the horizontal-to-vertical spectral ratio method to determine the depth to the Pierre Shale at each survey point. The electrical resistivity and passive seismic results were compared to driller logs from nearby wells to delineate the top of the Pierre Shale. The depth to the Pierre Shale along the transects ranged from about 2.4 to 20.3 meters, and mean and median depths were about 9.2 and 9.0 meters, respectively. The elevation of the Pierre Shale and thickness of unconsolidated deposits generally increased with land-surface elevation from south to north; however, some transects displayed topographically high and low areas that sometimes did not correlate with land-surface topography and may affect local groundwater flow.

South Dakota↗

USGS1983

Airborne biogeophysical mapping of hidden mineral deposits

Airborne survey techniques have been developed to detect and map forest canopies affected by metal-induced stress. A high spectral resolution airborne spectroradiometer system, used over a known forest-covered copper soil anomaly, has revealed previously unknown spectral changes in the near-infrared chlorophyll absorption spectrum. The metal-induced spectral shifts have subsequently been reproduced in the laboratory at Columbia University. Waveform analysis techniques specifically designed for computer analysis of the high spectral resolution aircraft data filter out the very strong background noise introduced by variations in normal, unstressed vegetation canopy and by topographic effects. The wave-form method proves most effective in extracting the subtle spectral indicators of metal-induced stress. The analytic method is a unique frequency domain technique made possible by the high spectral resolution of the 500-channel spectroradiometer system. The biogeophysical technique is demonstrated by three mapping surveys of Cotter Basin, Montana, and Spirit Lake, Washington. This airborne mapping technique presents new application opportunities in large areas of the world where heavy forest cover has in the past made geologic and geophysical exploration tedious and expensive. The tree cover with widespreading and deeply penetrating root systems is turned to an advantage in the airborne biogeophysical technique by detecting metal-induced changes in the chlorophyll reflectance spectrum.

Montana↗

USGS1991

Regional study of mineral resources in Nevada: Insights from three-dimensional analysis of gravity and magnetic anomalies

A three-dimensional interpretation of the basins of Nevada was developed based on statewide data bases of digital-gravity, magnetic, geologic, well, and topographic information. An iterative technique was applied to isostatic residual gravity anomalies in Nevada in order to define the location and shape of pre-Tertiary basement and to produce a gravity map that reflects variations of density within the pre-Tertiary basement. The dominant feature of the basement gravity of Nevada is an enormous area of low gravity that spans the entire state between latitudes 37°N and 40.5°N. This regional low strongly correlates with the distribution of middle and late Tertiary volcanic rocks and may reflect silicic intrusions within the mid-crust and upper crust that are the counterparts of volcanic rocks at the surface. Although 80% of Nevada is covered by Cenozoic deposits, these deposits are thicker than 1 km over only about 20% of the state. The remaining 60% of Nevada may have pre-Tertiary basement rocks within reach of current mineral-exploration techniques. Aeromagnetic profiles from the National Uranium Resource Evaluation (NURE) were analyzed in order to produce a map showing the location of shallow magnetic sources in Nevada. This analysis shows that 46% of the state has magnetic sources, generally Mesozoic and Cenozoic igneous rocks, within 1 km of the surface. A linear magnetic anomaly in north-central Nevada has been interpreted by others as a rift zone active during middle Miocene time. The rift also is evident in NURE magnetic profiles, but our interpretation suggests that the magnetic expression of the rift continues south-southeast with similar strike to at least 38°N and perhaps to the amagmatic zone (lat. 37°N). The survival since the middle Miocene of this narrow crustal feature, essentially linear over a distance of 500 km, is difficult to interpret in light of later Basin and Range deformation. Our analysis of gravity anomalies shows that many deep Cenozoic basins are located near the rift, yet only two basins cut across it, and at least five others change strike near the rift, as if to avoid it. The rift may have remained linear because it is associated with crustal structures that acted to resist subsequent deformation.

Nevada↗

USGS2017

Hydrologic Derivatives for Modeling and Analysis—A new global high-resolution database

The U.S. Geological Survey has developed a new global high-resolution hydrologic derivative database. Loosely modeled on the HYDRO1k database, this new database, entitled Hydrologic Derivatives for Modeling and Analysis, provides comprehensive and consistent global coverage of topographically derived raster layers (digital elevation model data, flow direction, flow accumulation, slope, and compound topographic index) and vector layers (streams and catchment boundaries). The coverage of the data is global, and the underlying digital elevation model is a hybrid of three datasets: HydroSHEDS (Hydrological data and maps based on SHuttle Elevation Derivatives at multiple Scales), GMTED2010 (Global Multi-resolution Terrain Elevation Data 2010), and the SRTM (Shuttle Radar Topography Mission). For most of the globe south of 60°N., the raster resolution of the data is 3 arc-seconds, corresponding to the resolution of the SRTM. For the areas north of 60°N., the resolution is 7.5 arc-seconds (the highest resolution of the GMTED2010 dataset) except for Greenland, where the resolution is 30 arc-seconds. The streams and catchments are attributed with Pfafstetter codes, based on a hierarchical numbering system, that carry important topological information. This database is appropriate for use in continental-scale modeling efforts. The work described in this report was conducted by the U.S. Geological Survey in cooperation with the National Aeronautics and Space Administration Goddard Space Flight Center.

Data Series↗

USGS2001

Potentiometric surface of the upper Patapsco aquifer in southern Maryland, September 1999

This report presents a map showing the potentiometric surface of the Upper Patapsco aquifer in the Patapsco Formation of Cretaceous age in Southern Maryland during September 1999. The map is based on water-level measurements in 49 wells. The potentiometric surface was 119 feet above sea level near the northern boundary and outcrop area of the aquifer in a topographically high area of Anne Arundel County, and 55 feet above sea level in a similar setting in Prince Georges County. From these high areas, the potentiometric surface declined to the southeast toward large well fields in the Annapolis area, and from all directions toward a cone of depression southwest of Waldorf. Ground-water levels declined to 20 feet below sea level in the Annapolis area, and 131 feet below sea level southwest of Waldorf.

Open-File Report↗

USGS2001

Changes in riparian vegetation in the Southwestern United States: Historical Changes along the Mojave River, California

Open-File Report↗