Search USGS⌕ Search

SEARCH · Search USGS

Results for “Scientific Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
USGS2013

Reconnaissance investigation of the rough diamond resource potential and production capacity of Côte d’Ivoire

Ethnic and political conflict developed into open civil war in Côte d’Ivoire in 2002, leading to a de facto partitioning of the country into the government-controlled south and the rebel-controlled north. Côte d’Ivoire’s two main diamond mining areas, Séguéla and Tortiya, are located in the north, under what was, until recently, rebel-controlled territory. In an effort to prevent proceeds from diamond mining from funding the conflict, the United Nations (UN) placed an embargo on the export of rough diamonds from Côte d’Ivoire in 2005. That same year, the Kimberley Process (KP), the international initiative charged with stemming the flow of conflict diamonds, acted to enforce this ban by adopting the Moscow Resolution on Côte d’Ivoire, which contained measures to prevent the infiltration of Ivorian diamonds into the legitimate global rough diamond trade. Though under scrutiny by the international community, diamond mining activities continued in Côte d’Ivoire, with artisanal miners exploiting both alluvial deposits in fluvial systems and primary kimberlitic dike deposits. However, because of the embargo, there has been no official record of diamond production since the conflict began in 2002. This lack of production statistics represents a significant data gap and hinders efforts by the KP to understand how illicitly produced diamonds may be entering the legitimate trade. This study presents the results of a multiyear effort to monitor the diamond mining activities of Côte d’Ivoire’s two main diamond mining areas, Séguéla and Tortiya. An innovative approach was developed that integrates data acquired from archival reports and maps, high-resolution satellite imagery, and digital terrain modeling to assess the total diamond endowment of the Séguéla and Tortiya deposits and to calculate annual diamond production from 2006 to 2013. On the basis of currently available data, this study estimates that a total of 10,100,000 carats remain in Séguéla and a total of 1,100,000 carats remain in Tortiya. Production capacity was calculated for the two study areas for the years 2006–2010 and 2012–2013. Production capacity was found to range from between 38,000 carats and 375,000 carats in Séguéla and from 13,000 carats and 20,000 carats in Tortiya. Further, this study demonstrates that artisanal mining activities can be successfully monitored by using remote sensing and geologic modeling techniques. The production capacity estimates presented here fill a significant data gap and provide policy makers, the UN, and the KP with important information not otherwise available.

Scientific Investigations Report↗
USGS2018

Temporal and spatial monitoring of cyanobacterial blooms at Willow Creek Reservoir, North-Central Oregon

The U.S. Geological Survey (USGS) and U.S. Army Corps of Engineers (USACE) investigated the spatial and temporal dynamics of cyanobacterial (blue-green algal) blooms in Willow Creek Reservoir in north-central Oregon in 2015–16. A combination of cameras and water-quality monitoring equipment was used to assess the frequency and duration of blooms and their effects on water quality. A surveillance camera captured color images every 15 minutes during daylight hours of the northwestern corner of Willow Creek Reservoir, where surface blooms tend to accumulate due to the prevailing summer winds. In 2015, a water-quality instrument was deployed in the northwestern corner of the reservoir to continuously measure water temperature, pH, dissolved oxygen, specific conductance, turbidity, total chlorophyll, and the blue-green algae pigment phycocyanin. In 2016, a water-quality instrument was used to collect measurements along transects throughout the reservoir to create spatial maps of water quality. The spatially integrated mapping process was repeated on three different days under varying algal conditions. Also in 2016, a telemetry connection was established allowing resource managers to view the reservoir images in near-real time. Results from 2015 indicate that surface accumulations of cyanobacteria can form and dissipate within minutes in the reservoir, and that blooms can cause substantial changes to water quality. A persistent cyanobacterial bloom in August and September 2015 resulted in pH values of 9.5 standard units, 220 percent oxygen saturation, and pronounced increases in turbidity and total chlorophyll. The stationary water-quality instrument collected data during periods with and without blooms, increasing our understanding of the effects of blooms on water quality and revealing potential restoration benchmarks for the freshwater reservoir. The spatially integrated mapping data showed the variation in water quality across the reservoir that occurs during blooms and baseline conditions and indicated regions of the reservoir to focus restoration efforts. Additional spatial data collection can be timed to collect daily extremes. The camera deployment in 2016 demonstrated that telemetering images from remote sites is possible and provides valuable and timely information. Monitoring with a surveillance camera is inexpensive and supplies data regarding surface-bloom presence or absence. The use of a camera can help target site visits to periods when blooms are observed, which may increase the accuracy of beginning and ending dates for water body closures. Monitoring cyanobacterial blooms in Willow Creek Reservoir with multiple devices provided a more comprehensive dataset than any one monitoring method. The camera images showed when a surface bloom initiated and dissipated while the water-quality instrument revealed the magnitude, or potential severity, of the effects on water quality.

Oregon↗
USGS2008

Proceedings of the U.S. Geological Survey Seventh Biennial Geographic Information Science Workshop, Denver, Colorado, May 12-16, 2008

The U.S. Geological Survey (USGS) Seventh Biennial Geographic Information Science (GIS) Workshop (USGS-GIS 2008) on May 12 through 16, 2008, at the Denver Federal Center in Denver, Colorado, is unique in that it brings together GIS professionals from all of the USGS disciplines across all regions, and focuses primarily on the needs and accomplishments of the USGS. The theme for the 2008 workshop, “GIS for Tomorrow’s Challenges,” provides an opportunity for USGS GIS professionals to demonstrate how they have responded to the challenges set forth in the USGS Science Strategy (http://www.usgs.gov/science_ strategy/). During this workshop, attendees will have an opportunity to present or demonstrate their work; develop their knowledge by attending hands-on workshops and presentations given by professionals from the USGS and other Federal agencies, GIS-related companies, and academia; and to network with other professionals to develop collaborative opportunities. In addition to participation in numerous workshops and presentations, attendees will have opportunities to listen to top-level managers from the USGS present updates and goals concerning the future of several USGS programs. Monday evening’s Star Guest presentation by Thomas Wagner, NSF Office of Polar Programs, and Paul Morin, Antarctic Geospatial Information Center, entitled “Mapping all that is White: Antarctic Science and Operations Viewed Though Geospatial Data,” will be one of many valuable presentations. This Proceedings volume will serve as an activity reference for workshop attendees, as well as an archive of technical abstracts presented at the workshop. Author, co-author, and presenter names, affiliations, and contact information are listed with presentation titles with the abstracts. Some hands-on sessions are offered twice; in these instances, abstracts submitted for publication are presented in the proceedings on both days on which they are offered. All acronyms used in these proceedings are explained in the text of each abstract.

Scientific Investigations Report↗
USGS2010

Groundwater resources of the East Mountain area, Bernalillo, Sandoval, Santa Fe, and Torrance Counties, New Mexico, 2005

The groundwater resources of about 400 square miles of the East Mountain area of Bernalillo, Sandoval, Santa Fe, and Torrance Counties in central New Mexico were evaluated by using groundwater levels and water-quality analyses, and updated geologic mapping. Substantial development in the study area (population increased by 11,000, or 50 percent, from 1990 through 2000) has raised concerns about the effects of growth on water resources. The last comprehensive examination of the water resources of the study area was done in 1980-this study examines a slightly different area and incorporates data collected in the intervening 25 years. The East Mountain area is geologically and hydrologically complex-in addition to the geologic units, such features as the Sandia Mountains, Tijeras and Gutierrez Faults, Tijeras syncline and anticline, and the Estancia Basin affect the movement, availability, and water quality of the groundwater system. The stratigraphic units were separated into eight hydrostratigraphic units, each having distinct hydraulic and chemical properties. Overall, the major hydrostratigraphic units are the Madera-Sandia and Abo-Yeso; however, other units are the primary source of supply in some areas. Despite the eight previously defined hydrostratigraphic units, water-level contours were drawn on the generalized regional potentiometric map assuming all hydrostratigraphic units are connected and function as a single aquifer system. Groundwater originates as infiltration of precipitation in upland areas (Sandia, Manzano, and Manzanita Mountains, and the Ortiz Porphyry Belt) and moves downgradient into the Tijeras Graben, Tijeras Canyon, San Pedro synclinorium, and the Hagan, Estancia, and Espanola Basins. The study area was divided into eight groundwater areas defined on the basis of geologic, hydrologic, and geochemical information-Tijeras Canyon, Cedar Crest, Tijeras Graben, Estancia Basin, San Pedro Creek, Ortiz Porphyry Belt, Hagan Basin, and Upper Sandia Mountains. View report for unabridged abstract.

Scientific Investigations Report↗
USGS2015

The Everglades Depth Estimation Network (EDEN) surface-water model, version 2

The Everglades Depth Estimation Network (EDEN) is an integrated network of water-level gages, interpolation models that generate daily water-level and water-depth data, and applications that compute derived hydrologic data across the freshwater part of the greater Everglades landscape. The U.S. Geological Survey Greater Everglades Priority Ecosystems Science provides support for EDEN in order for EDEN to provide quality-assured monitoring data for the U.S. Army Corps of Engineers Comprehensive Everglades Restoration Plan. The EDEN surface-water model, version 2 (V2), interpolates water-level data from a network of 240 gages to generate gridded daily water-level surfaces for the freshwater domain of the Everglades. When these spatiotemporal continuous surfaces are combined with EDEN’s digital elevation model of ground surface, derived hydrologic data provide scientists and water managers working in the Everglades with data necessary to analyze ecological and biotic responses to hydrologic changes in the Everglades. Derived datasets include water depth, recession rates, days since last dry, water-surface slopes, and hydroperiod. The V2 model includes enhancements from the previous model (version 1; V1) to accommodate changes in the water-level gage network, adjustments to water-level data, improved understanding of the flow dynamics (particularly near canals), and installation of an elevation benchmark network. Enhancements to the V2 model included Expansion of the EDEN domain: The model domain was expanded to include a part of southern Big Cypress National Preserve and northwestern Everglades National Park upstream of the marsh mangrove wetlands, thus completing the coastal connection along the southwestern boundary of the model; and Development of subdomain models: To account for insufficient water-control structure gage data at some subbasin boundaries, subdomain models were developed for five subdomains, and the resulting water-level surfaces were merged to generate the final water-level surface. Model performance statistics show a general improvement in the V2 model as compared to the V1 model. Overall, the root mean squared error (RMSE) was reduced by 2.42 centimeters (cm) to 4.68 cm. In Water Conservation Area 3A North and Water Conservation Area 3B, the RMSE was reduced by 10.88 and 9.15 cm, respectively. In addition to evaluating model performance statistics, 2-cm water-level maps were generated and evaluated for irregular contours that would indicate a potential problem either with data input or water-level estimates. Three applications of the EDEN-modeled water surfaces and other EDEN datasets are presented in the report to show how scientists and resource managers are using EDEN datasets to analyze biological and ecological responses to hydrologic changes in the Everglades. The biological responses of two important Everglades species, alligators and wading birds, to changes in hydrology are described. The effects of hydrology on fire dynamics in the Everglades are also discussed.

Florida↗
USGS2013

Preliminary hydrogeologic assessment near Tassi and Pakoon Springs, western part of Grand Canyon-Parashant National Monument, Arizona

Tassi and Pakoon Springs are both in the Grand Wash Trough in the western part of Grand Canyon-Parashant National Monument on the Arizona Strip. The monument is jointly managed by the National Park Service (NPS) and the Bureau of Land Management. This study was in response to NPS’s need to better understand the influence from regional increases in groundwater withdrawals near Grand Canyon-Parashant on the groundwater discharge from Tassi and Pakoon Springs. The climate of the Arizona Strip is generally semiarid to arid, and springs in the monument provide the water for the fragile ecosystems that are commonly separated by large areas of dry washes in canyons with pinyon and juniper. Available hydrogeologic data from previous investigations included water levels from the few existing wells, location information for springs, water chemistry from springs, and geologic maps. Available groundwater-elevation data from the wells and springs in the monument indicate that groundwater in the Grand Wash Trough is moving from north to south, discharging to springs and into the Colorado River. Groundwater may also be moving from east to west from Paleozoic rocks in the Grand Wash Cliffs into sedimentary deposits in the Grand Wash Trough. Finally, groundwater may be moving from the northwest in the Mesoproterozoic crystalline rocks of the Virgin Mountains into the northern part of the Grand Wash Trough. Water discharging from Tassi and Pakoon Springs has a major-ion chemistry similar to that of other springs in the western part of Grand Canyon-Parashant. Stable-isotopic signatures for oxygen-18 and hydrogen-2 are depleted in the water from both Tassi and Pakoon Springs in comparison to other springs on the Arizona Strip. Tassi Spring discharges from multiple seeps along the Wheeler Fault, and the depleted isotopic signatures suggest that water may be flowing from multiple places into Lake Mead and seems to have a higher elevation or an older climate source. Elevated water temperatures and a depleted stable-isotopic signature for Pakoon Springs suggest that the water may be traveling along a deep circulating flowpath, have multiple sources of water, been recharged at a high elevation, and (or) has an older climate source.

Arizona↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific Continental Margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS2009

Assessment of Lower Missouri River physical aquatic habitat and its use by adult sturgeon ( Genus Scaphirhynchus ), 2005-07

This report presents an exploratory analysis of habitat availability and use by adult Scaphirhynchus sturgeon on the Lower Missouri River from Gavins Point Dam, South Dakota, to the junction with the Mississippi River. The analysis is based on two main data sources collected from 2005 to 2007: (1) a compilation of 153 reach-scale habitat maps (mean reach length, 2.4 kilometers) derived from boat-collected hydroacoustic data and (2) a sturgeon location dataset from which 378 sturgeon telemetry locations are associated with the maps (within 7 days of the mapping and within 10 percent of the discharge). The report focuses on: (1) longitudinal patterns of geomorphic and hydraulic characteristics revealed by the collection of reach maps; (2) assessment of environmental characteristics at sturgeon locations in the context of the mapped reaches; and (3) consideration of spatial distribution of habitat conditions that sturgeon appear to select. Longitudinal patterns of geomorphology, hydraulics, and associated habitats relate strongly to the engineered state of the river. Reaches within each of the following river sections tended to share similar geomorphic, hydrologic, and hydraulic characteristics: the Minimally Engineered section (Gavins Point Dam to Sioux City, Iowa), the Upstream Channelized section (Sioux City, Iowa, to the junction with the Kansas River), and the Downstream Channelized section (Kansas River to the junction with the Mississippi River). Adult sturgeon occupy nearly the full range of available values for each continuous variable assessed: depth, depth slope, depth-averaged velocity, velocity gradient, and Froude number (a dimensionless number relating velocity to depth). However, in the context of habitat available in a reach, sturgeon tend to select some areas over others. Reproductive female shovelnose sturgeon (Scaphirhynchus platorynchus), in particular, were often found in parts of the reach with one or more of the following characteristics: high velocity gradient, high depth slope, low Froude number, and low (though not necessarily the lowest) depth-averaged velocity. Depths used by sturgeon varied considerably. We explored spatial patterns representing the variable ranges that reproductive female shovelnose sturgeon most strongly and consistently selected by mapping areas within reaches meeting the following criteria: greater than the 80th percentile of depth slope, greater than the 80th percentile of velocity gradient, and less than the 20th percentile of Froude number. Our data exploration indicates that areas meeting these criteria have some predictive value regarding sturgeon habitat selection. Of all sturgeon locations that fall on maps from the same year (sample size = 2,013), about 63 percent fall within about 35 percent of the area where at least one variable meets the above criteria and 18 percent of locations fall within 4 percent of the area where all three variables meet the above criteria. The spatial patterns of these mapped areas show distinct differences among the sections of the Lower Missouri River. For example, the areas of predicted selection exhibit a relatively complex mosaic with multiple interconnected pathways in reaches of the Minimally Engineered section. In contrast, areas of predicted selection are concentrated along the channel margins in reaches of the Upstream Channelized section. Because the patterns described in this report represent habitat use in the context of the available habitat in a highly altered river system, selection may not necessarily indicate preferred habitats or habitats sufficient for reproduction and survival of sturgeon species.

Scientific Investigations Report↗
USGS2018

Characterization and occurrence of confined and unconfined aquifers in Quaternary sediments in the glaciated conterminous United States

The glacial aquifer system, which is a collection of aquifers within Quaternary sediments in the glaciated conterminous United States, is a principal aquifer that supplies groundwater that serves about 42 million people and accounts for about 5 percent of the Nation’s drinking water. This aquifer system (the area of maximum glacial advance) underlies parts of 25 States and covers 1.87×10 6 square kilometers. A hydrogeologic framework is presented that divides the glaciated United States into 17 distinct hydrogeologic terranes using a geologic approach based on previous mapping. Each hydrogeologic terrane contains Quaternary sediment that is derived from a common depositional history and can be characterized by similar texture and thickness. Characteristics of Quaternary sediments are described using attributes computed from a lithologic database of well logs compiled from 24 States (excluding Kentucky). The hydrogeologic framework presents a nationwide picture of the glacial aquifer system and provides generalizations concerning the nature of aquifers within it (for example, whether the aquifers are shallow or deep, and unconfined or confined). In this way insights can be gained from understanding the similarities and differences in distinct parts of the glacial aquifer system and how they relate to water use and quality and to aquifer vulnerability. Delineation of hydrogeologic terranes was based on an interpretation of existing geologic mapping of Quaternary sediments and the thickness of unconsolidated material. Overall thickness of Quaternary sediment was used to qualitatively rank the generalized complexity of the hydrogeologic framework in each terrane: “lower” complexity (assigned a terrane code 1), “moderate” complexity (terrane code 2), and “higher” complexity (terrane code 3). Letter designations appended to the terrane codes (for example, 1A, 1B, or 1C) differentiate terranes of similar complexity. Two unique areas, where thick, stratified, coarse-grained sediment dominates, were assigned terrane code 4. Elements of this hydrogeologic framework include a glacial environments and surficial sediments geodatabase, which includes lithologic, geomorphic, and stratigraphic characterization of Quaternary sediments based on previous mapping; a gridded database of sediment and aquifer characteristics computed from lithologic logs obtained from water-well driller records; a water-use database with information on public-water supply systems and sources of groundwater; and estimated recharge computed from a geologically based soil-water balance model. A generalized map of the bedrock geology based on previous State-level mapping is included as well. Quaternary sediment in the glaciated United States includes glacial, postglacial (Holocene) and nonglacial sediments. At land surface, 60 percent of the glacial sediment is till. Large areas of outwash and ice contact sediments are extensive throughout the Midwest but generally are confined to valleys in the Northeast and the Northwest. Lacustrine sediments were deposited in proglacial lakes adjacent to the present Great Lakes and in glacial Lake Agassiz in the eastern Dakotas and northwestern Minnesota. The median thickness of Quaternary sediment ranges from 6 to 45 meters across the 17 hydrogeologic terranes, but the maximum thickness is more than 500 meters in some areas. Quaternary sediments generally contain less than 10 percent coarse material; the median range is near zero percent under till to about 50 percent under ice contact and outwash sediments. About 80 percent of the coarse material lies within 25 to 40 meters of land surface. In most of the glaciated United States, there is a small likelihood of penetrating an aquifer-material interval containing coarse material at least 3 meters thick. A single aquifer-material interval was recorded in about 44 percent of lithologic logs, whereas about 11 percent of the logs penetrated multiple intervals. About 44 percent of water wells in the lithologic database are completed in Quaternary sediment, and many of these Quaternary water wells (42 percent) are confined by at least 7.5 meters of fine materials. About 33 percent of these Quaternary water wells are unconfined—the remainder are where only thin layers (less than 3 meters) of coarse material are present. The median depths of Quaternary water wells range from 13 to 40 meters among the 17 hydrogeologic terranes. Recharge ranges from more than 400 millimeters per year in the Northeast to 11 millimeters or less per year in the Dakotas and Montana (median value of 136 millimeters per year). Annual groundwater withdrawals compiled by county range on an areal basis from less than 1 to 370 millimeters per year, and the mean is 7.4 millimeters per year. About 36 percent of the withdrawals are for public-water supply, of which 70 percent are derived from Quaternary sediments. Groundwater withdrawals are less than 10 percent of recharge throughout most of the glaciated conterminous United States but are a larger proportion of recharge near urban areas in the Northeast and the Midwest, and in counties throughout drier parts of the Midwest. The salient characteristics of the 17 hydrogeologic terranes are presented through maps and a set of descriptive plots to facilitate visual comparisons between selected sediment and aquifer characteristics. The thickness of Quaternary sediment generally increases from the lower complexity terranes through the higher complexity terranes, consistent with their delineation. Median proportions of coarse material in Quaternary sediment and depths to aquifer-material intervals are highly variable (less than 10 to 50 percent, and 0 to 30 meters, respectively). Median thicknesses of aquifer-material intervals generally fall within a narrow range (10 to 20 meters), except in two terranes that contain thick coarse-grained sediment (30 to 35 meters). The source of water in wells varies from mostly bedrock wells in the lower complexity terranes to mostly Quaternary wells in the higher complexity terranes where the sediment is thickest. A tree diagram compiled from a hierarchical cluster analysis of a matrix composed of metrics based on sediment and aquifer characteristics, and the distribution of water wells in each terrane, indicates some groups of terranes that can be treated as comparable when analyzing groundwater flow and quality. Aquifer-material intervals indicated on maps prepared from the lithologic logs, including unconfined and confined conditions, correlate well with aquifer systems delineated on state maps for Illinois, Indiana, and North Dakota. The large scale of the study limits the resolution at which the maps can be interpreted, however, and alluvial units are not mapped correctly for some valleys in the Northeast and the Northwest. Lithologic logs used in the study are biased toward shallow depths because not all logs penetrate the entire thickness of Quaternary sediment, but this bias should not limit the utility of the sediment and aquifer descriptions because shallow depths are commonly exploited for water supply. The hydrogeologic framework will support ongoing studies of groundwater flow and quality in the U.S. Geological Survey National Water Quality Assessment program for the glaciated United States.

Scientific Investigations Report↗
USGS2022

Ungulate migrations of the western United States, volume 2

Migration is widespread across taxonomic groups and increasingly recognized as fundamental to maintaining abundant wildlife populations and communities. Many ungulate herds migrate across the western United States to access food and avoid harsh environmental conditions. With the advent of global positioning system (GPS) collars, researchers can describe and map the year-round movements of ungulates at both large and small spatial scales. The migrations can traverse landscapes that are a mix of different jurisdictional ownership and management. Today, the landscapes migrating herds traverse are increasingly threatened by fencing, high-traffic roads, oil and gas development, and other types of permanent development. Through the use of GPS collars, a model of science-based conservation emerged in which migration corridors, stopovers, and winter ranges can be mapped in detail, thereby allowing threats and conservation opportunities to be identified and remedied. In 2018, the U.S. Geological Survey (USGS) assembled a Corridor Mapping Team (CMT) to work collaboratively with western states to map migrations of Odocoileus hemionus (mule deer), Cervus canadensis (elk), and Antilocapra americana (pronghorn). Led by the USGS Wyoming Cooperative Fish and Wildlife Research Unit, the team consists of Federal scientists, university researchers, and biologists and analysts from participating State and Tribal agencies. The first set of maps described a total of 42 migrations across 5 western states and was published in 2020 as the first volume of this report series. This second volume describes an additional 65 migrations mapped within 9 western states and select Tribal lands. As the western United States continues to grow, this report series and the associated map files released by the USGS will allow for migration maps to be used for conservation planning by a wide array of State and Federal stakeholders to reduce barriers to migration caused by fences, roads, and other development.

western United States↗
USGS2022

Hydrogeologic characteristics of Hourglass and New Years Cave Lakes at Jewel Cave National Monument, South Dakota, from water-level and water-chemistry data, 2015–21

Jewel Cave National Monument is in the western Black Hills of South Dakota and contains an extensive cave network, including various subterranean water bodies (cave lakes) that are believed to represent the regionally important Madison aquifer. Recent investigations have sought to improve understanding of hydrogeologic characteristics of cave lakes in Jewel Cave. The U.S. Geological Survey, in cooperation with the National Park Service, collected water-level and water-chemistry data within and near Jewel Cave to better understand groundwater interactions in Jewel Cave and to evaluate recharge characteristics of cave lakes. Continuous water-level data were collected at two cave lakes (Hourglass and New Years Lakes) from 2018 to 2021, and discrete measurements were collected by National Park Service staff from 2015 to 2021. Water samples were collected from one stream, one rain collector, three springs, and two cave lakes. The approach for this study included comparing water-level data collected from two cave lakes to historical climate data and using multivariate statistical analyses to evaluate water samples collected during this study and from previous investigations. This study builds on interpretations from previous investigations that collected similar datasets and performed similar analyses. Hydrographs of Hourglass and News Years Lakes from 2015 to 2021 demonstrated the variability of groundwater levels in Jewel Cave in response to dry and wet climate conditions. Hourglass Lake displayed small (up to 4.8 feet), gradual water-level changes, whereas New Years Lake displayed relatively large (up to at least 27.5 feet) and rapid water-level changes. Hourglass and New Years Lakes are about 0.4 mile apart at the land surface, and the water-level elevation between the lakes varied from 61 to 93.5 feet from 2016 to 2021. The proximity and relatively small elevation difference of Hourglass and New Years Lakes indicated different recharge sources and (or) mechanisms were responsible for hydrograph dissimilarities. Water-level changes at Hourglass Lake were similar to water-level changes at a well completed in the Madison aquifer about 9 miles south of Jewel Cave National Monument, which indicated Hourglass Lake may be recharged similar to the regional Madison aquifer along outcrops north of Jewel Cave. New Years Lake displayed almost no similarities to the well completed in the Madison aquifer—indicating a more direct connection to local recharge rather than solely from outcrops recharging the regional Madison aquifer. Results from multivariate statistical analyses of water-chemistry data were used to evaluate recharge observations from water-level data. The water chemistry of Hourglass Lake indicated its water was chemically more similar to precipitation than other groundwater sites sampled. A conceptual karst recharge model indicated that the dominant recharge source to Hourglass Lake was diffuse allogenic recharge from vertical movement of infiltrated precipitation through vertical or near-vertical fractures that extend through the Minnelusa Formation and unsaturated zone of the Madison Limestone. The water chemistry of New Years Lake was chemically similar to Hell Canyon Creek about 0.2 mile from New Years Lake at the land surface. Streamflow loss zones (concentrated allogenic recharge) along Hell Canyon Creek have not been mapped, but their presence in the Jewel Cave area has been speculated by previous investigations. A fault observed in the cave ceiling above New Years Lake by National Park Service staff could provide a natural conduit for direct recharge from Hell Canyon Creek to New Years Lake if the fault is extensive. Additional water-chemistry and water-level data, as well as streamflow data upstream and downstream of the potential streamflow loss zone along Hell Canyon Creek, are needed to prove the presence of this loss zone and discern further correlations between streamflow and water levels in New Years Lake. Observations from previous investigations and this study indicated recharge to Jewel Cave is complex and occurs on various timescales that are affected temporally by precipitation patterns and spatially by hydrologic connection with the overlying Minnelusa aquifer of the Minnelusa Formation.

South Dakota↗
USGS2011

Hydrogeology and simulation of groundwater flow in the Arbuckle-Simpson aquifer, south-central Oklahoma

The Arbuckle-Simpson aquifer in south-central Oklahoma provides water for public supply, farms, mining, wildlife conservation, recreation, and the scenic beauty of springs, streams, and waterfalls. Proposed development of water supplies from the aquifer led to concerns that large-scale withdrawals of water would cause decreased flow in rivers and springs, which in turn could result in the loss of water supplies, recreational opportunities, and aquatic habitat. The Oklahoma Water Resources Board, in collaboration with the Bureau of Reclamation, the U.S. Geological Survey, Oklahoma State University, and the University of Oklahoma, studied the aquifer to provide the Oklahoma Water Resources Board the scientific information needed to determine the volume of water that could be withdrawn while protecting springs and streams. The U.S. Geological Survey, in coopertion with the Oklahoma Water Resources Board, did a study to describe the hydrogeology and simulation of groundwater flow of the aquifer. The outcrop of the Arbuckle-Simpson aquifer covers an area of about 520 square miles in Carter, Coal, Johnston, Murray, and Pontotoc Counties. Three subdivisions of the aquifer outcrop were designated for this study: the eastern, central, and western Arbuckle-Simpson aquifer. This study emphasized the eastern Arbuckle-Simpson aquifer because it is the largest part of the aquifer by area and volume; most groundwater withdrawals are from the eastern Arbuckle-Simpson aquifer; and the largest (by flow) streams and springs sourced from the aquifer are on the eastern Arbuckle-Simpson aquifer. The aquifer lies in an uplifted area commonly referred to as the Arbuckle Mountains, which is characterized by great thicknesses of mostly carbonate rocks, uplifts, folded structures, and large fault displacements. The Arbuckle-Simpson aquifer is contained in three major rock units of Late Cambrian to Middle Ordovician age: the Timbered Hills, Arbuckle, and Simpson Groups. The aquifer is underlain by low-permeability Cambrian and Proterozoic igneous and metamorphic rocks, and is confined above by younger sedimentary rocks of various ages in areas where the top of the aquifer dips below the surface. The major part of the Arbuckle-Simpson aquifer is the Arbuckle Group, which consists of as much as 6,700 feet of limestone in the western Arbuckle-Simpson aquifer, but which thins to an estimated 3,000 feet of predominantly dolostone in the eastern Arbuckle-Simpson aquifer. Water is obtained from cavities, solution channels, fractures, and intercrystalline porosity in the limestone and dolostone. The overlying Simpson Group, consisting of sandstones, shales, and limestones, is as much as 2,300 feet thick in the western Arbuckle-Simpson aquifer, but generally is less than 1,000 feet thick in the eastern aquifer. Water in the Simpson Group is stored primarily in pore spaces between the sand grains in the sandstones. A digital, three-dimensional geologic framework model was constructed to define the geometric relations of fault blocks and subsurface rock units across complex fault zones of the eastern Arbuckle-Simpson aquifer. Geologic data for the model were obtained from 126 drill holes; stratigraphic contacts and faults defined from a digitized version of the surface geologic map; and fault geometry, stratigraphic thickness, and information compiled from geologic and hydrogeologic reports and maps. Groundwater in the aquifer moves from areas of high head (altitude) to areas of low head along streams and springs. The potentiometric surface in the eastern Arbuckle-Simpson aquifer generally slopes from a topographic high from northwest to the southeast, indicating that regional groundwater flow is predominantly toward the southeast. Freshwater is known to extend beyond the aquifer outcrop near the City of Sulphur, Oklahoma, and Chickasaw National Recreation Area, where groundwater flows west from the outcrop of the eastern Arbuckle-Simpson aquifer and becomes confin

Scientific Investigations Report↗
USGS2012

Estimated probability of arsenic in groundwater from bedrock aquifers in New Hampshire, 2011

Probabilities of arsenic occurrence in groundwater from bedrock aquifers at concentrations of 1, 5, and 10 micrograms per liter (µg/L) were estimated during 2011 using multivariate logistic regression. These estimates were developed for use by the New Hampshire Environmental Public Health Tracking Program. About 39 percent of New Hampshire bedrock groundwater was identified as having at least a 50 percent chance of containing an arsenic concentration greater than or equal to 1 µg/L. This compares to about 7 percent of New Hampshire bedrock groundwater having at least a 50 percent chance of containing an arsenic concentration equaling or exceeding 5 µg/L and about 5 percent of the State having at least a 50 percent chance for its bedrock groundwater to contain concentrations at or above 10 µg/L. The southeastern counties of Merrimack, Strafford, Hillsborough, and Rockingham have the greatest potential for having arsenic concentrations above 5 and 10 µg/L in bedrock groundwater. Significant predictors of arsenic in groundwater from bedrock aquifers for all three thresholds analyzed included geologic, geochemical, land use, hydrologic, topographic, and demographic factors. Among the three thresholds evaluated, there were some differences in explanatory variables, but many variables were the same. More than 250 individual predictor variables were assembled for this study and tested as potential predictor variables for the models. More than 1,700 individual measurements of arsenic concentration from a combination of public and private water-supply wells served as the dependent (or predicted) variable in the models. The statewide maps generated by the probability models are not designed to predict arsenic concentration in any single well, but they are expected to provide useful information in areas of the State that currently contain little to no data on arsenic concentration. They also may aid in resource decision making, in determining potential risk for private wells, and in ecological-level analysis of disease outcomes. The approach for modeling arsenic in groundwater could also be applied to other environmental contaminants that have potential implications for human health, such as uranium, radon, fluoride, manganese, volatile organic compounds, nitrate, and bacteria.

New Hampshire↗
USGS2010

Simulated effects of groundwater pumping and artificial recharge on surface-water resources and riparian vegetation in the Verde Valley sub-basin, Central Arizona

In the Verde Valley sub-basin, groundwater use has increased in recent decades. Residents and stakeholders in the area have established several groups to help in planning for sustainability of water and other resources of the area. One of the issues of concern is the effect of groundwater pumping in the sub-basin on surface water and on groundwater-dependent riparian vegetation. The Northern Arizona Regional Groundwater-Flow Model by Pool and others (in press) is the most comprehensive and up-to-date tool available to understand the effects of groundwater pumping in the sub-basin. Using a procedure by Leake and others (2008), this model was modified and used to calculate effects of groundwater pumping on surface-water flow and evapotranspiration for areas in the sub-basin. This report presents results for the upper two model layers for pumping durations of 10 and 50 years. Results are in the form of maps that indicate the fraction of the well pumping rate that can be accounted for as the combined effect of reduced surface-water flow and evapotranspiration. In general, the highest and most rapid responses to pumping were computed to occur near surface-water features simulated in the modified model, but results are not uniform along these features. The results are intended to indicate general patterns of model-computed response over large areas. For site-specific projects, improved results may require detailed studies of the local hydrologic conditions and a refinement of the modified model in the area of interest.

Scientific Investigations Report↗
USGS2014

Evaluation of groundwater and surface-water interactions in the Caddo Nation Tribal Jurisdictional Area, Caddo County, Oklahoma, 2010-13

Streamflows, springs, and wetlands are important natural and cultural resources to the Caddo Nation. Consequently, the Caddo Nation is concerned about the vulnerability of the Rush Springs aquifer to overdrafting and whether the aquifer will continue to be a viable source of water to tribal members and other local residents in the future. Interest in the long-term viability of local water resources has resulted in ongoing development of a comprehensive water plan by the Caddo Nation. As part of a multiyear project with the Caddo Nation to provide information and tools to better manage and protect water resources, the U.S. Geological Survey studied the hydraulic connection between the Rush Springs aquifer and springs and streams overlying the aquifer. The Caddo Nation Tribal Jurisdictional Area is located in southwestern Oklahoma, primarily in Caddo County. Underlying the Caddo Nation Tribal Jurisdictional Area is the Permian-age Rush Springs aquifer. Water from the Rush Springs aquifer is used for irrigation, public, livestock and aquaculture, and other supply purposes. Groundwater from the Rush Springs aquifer also is withdrawn by domestic (self-supplied) wells, although domestic use was not included in the water-use summary in this report. Perennial streamflow in many streams and creeks overlying the Rush Springs aquifer, such as Cobb Creek, Lake Creek, and Willow Creek, originates from springs and seeps discharging from the aquifer. This report provides information on the evaluation of groundwater and surface-water resources in the Caddo Nation Jurisdictional Area, and in particular, information that describes the hydraulic connection between the Rush Springs aquifer and springs and streams overlying the aquifer. This report also includes data and analyses of base flow, evidence for groundwater and surface-water interactions, locations of springs and wetland areas, groundwater flows interpreted from potentiometric-surface maps, and hydrographs of water levels monitored in the Caddo Nation Tribal Jurisdictional Area from 2010 to 2013. Flow in streams overlying the Rush Springs aquifer, on average, were composed of 50 percent base flow in most years. Monthly mean base flow appeared to maintain streamflows throughout each year, but periods of zero flow were documented in daily hydrographs at each measured site, typically in the summer months. A pneumatic slug-test technique was used at 15 sites to determine the horizontal hydraulic conductivity of streambed sediments in streams overlying the Rush Springs aquifer. Converting horizontal hydraulic conductivities (Kh) from the slug-test analyses to vertical hydraulic conductivities (Kv) by using a ratio of Kv/Kh = 0.1 resulted in estimates of vertical streambed hydraulic conductivity ranging from 0.1 to 8.6 feet per day. Data obtained from a hydraulic potentiomanometer in streambed sediments and streams in August 2012 indicate that water flow was from the streambed sediments to the stream (gaining) at 6 of 15 sites, and that water flow was from the stream to the streambed sediments (losing) at 9 of 15 sites. The groundwater and surface-water interaction data collected at the Cobb Creek near Eakly, Okla., streamflow gaging station (07325800), indicate that the bedrock groundwater, alluvial groundwater, and surface-water resources are closely connected. Because of this hydrologic connection, large perennial streams in the study area may change from gaining to losing streams in the summer. The timing and severity of this change from a gaining to a losing condition probably is affected by the local or regional withdrawal of groundwater for irrigation in the summer growing season. Wells placed closer to streams have a greater and more immediate effect on alluvial groundwater levels and stream stages than wells placed farther from streams. Large-capacity irrigation wells, even those completed hundreds of feet below land surface in the bedrock aquifer, can induce surface-water flow from nearby streams by lowering alluvial groundwater levels below the stream altitude. Twenty-five new springs visible from public roads and paths were documented during a survey of springs in 2011. Most of the springs are in upland draws on the flanks of topographic ridges. Wetlands primarily were identified by using a combination of data sources including the National Wetlands Inventory, Soil Survey Geographic database frequently flooded soils maps, and aerial photographs. Regional flow directions were determined by analysis of water levels measured in 29 wells completed in the Rush 2 Springs aquifer in Caddo County and the Caddo Nation Tribal Jurisdictional Area. Water levels were monitored every 30 minutes in five wells by using a vented pressure transducer and a data-collection platform with real-time transmitting equipment in each well. Those five wells ranged in depth from 210 to 350 feet. Water levels in these five wells indicate that there was a decrease in water storage in the Rush Springs aquifer from October 2010 to June 2013.

Oklahoma↗