Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research - Planets”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
USGS1998

Deformation across the rupture zone of the 1964 Alaska earthquake, 1993–1997

A linear array of 15 geodetic monuments was installed in 1993 across the rupture zone of the 1964 Alaska earthquake ( M w = 9.2). The array extends from Middleton Island (at the edge of the continental shelf and 80 km from the Alaska‐Aleutian trench) to north of Palmer, Alaska (380 km from the trench), in the approximate direction of Pacific‐North American plate convergence (N15.5°W). The array was surveyed in June 1993, May 1995, and June 1997. The changes between surveys are a measure of the deformation of the continental margin across the subduction zone in southern Alaska. Measured relative to the interior of the North American plate, the horizontal velocities on the outer plate margin are parallel to the direction of plate convergence (N15.5°W ) and reach a maximum (58 mm yr −1 ) about 150 km from the trench. Beyond about 300 km from the trench the observed horizontal velocities are small. A narrow (halfwidth 50 km) zone of significant uplift (10 mm yr −1 maximum) is observed about 300 km from the trench, coinciding roughly with the locus of maximum coseismic subsidence associated with the 1964 Alaska earthquake. Although the deformation is roughly described by the conventional model of deformation at a subduction zone (deformation due to virtual back slip on the main thrust zone at the 55 mm yr −1 plate convergence rate), a better fit is given with a 65 mm yr −1 virtual back (normal) slip rate. This higher rate is attributed to continued postseismic relaxation. The model does not explain the relatively high uplift rate and low N15.5°W velocity observed at Middleton Island. That anomalous motion is attributed to continued thrusting on postulated upward trending splays from the subduction zone beneath the island.

Alaska↗
USGS1998

Paleomagnetism of the Miocene intrusive suite of Kidd Creek: Timing of deformation in the Cascade arc, southern Washington

Paleomagnetic study of the intrusive suite of Kidd Creek in the southern Washington Cascades (23 sites in dikes and sills) was undertaken to help determine if these rocks are comagmatic and whether they postdate regional folding of the volcanic arc. Fission track and 40 Ar- 39 Ar age determinations indicate an age of ∼12.7 Ma (middle Miocene) for these rocks. The similarity of normal-polarity characteristic directions for most samples corroborate the available geochemical data indicating that these rocks are most likely comagmatic. Reversed-polarity directions for samples from four sites, however, show that emplacement of Kidd Creek intrusions spanned at least one reversal of the geomagnetic field. The paleomagnetic directions for the dikes and sills fail a fold test at the 99% confidence level indicating that the Kidd Creek rocks postdate regional folding. The mean in situ direction also indicates that the Kidd Creek and older rocks have been rotated 22°±6° clockwise about a vertical or near-vertical axis from the expected Miocene direction. Compression and regional folding of the Cascade arc in southern Washington therefore had ended by ∼12 Ma prior to the onset of deformation resulting in rotation of these rocks.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Poroelastic rebound along the Landers 1992 earthquake surface rupture

Maps of surface displacement following the 1992 Landers, California, earthquake, generated by interferometric processing of ERS-1 synthetic aperture radar (SAR) images, reveal effects of various postseismic deformation processes along the 1992 surface rupture. The large-scale pattern of the postseismic displacement field includes large lobes, mostly visible on the west side of the fault, comparable in shape with the lobes observed in the coseismic displacement field. This pattern and the steep displacement gradient observed near the Emerson-Camp Rock fault cannot be simply explained by afterslip on deep sections of the 1992 rupture. Models show that horizontal slip occurring on a buried dislocation in a Poisson's material produces a characteristic quadripole pattern in the surface displacement field with several centimeters of vertical motion at distances of 10–20 km from the fault, yet this pattern is not observed in the postseismic interferograms. As previously proposed to explain local strain in the fault step overs [ Peltzer et al ., 1996b], we argue that poroelastic rebound caused by pore fluid flow may also occur over greater distances from the fault, compensating the vertical ground shift produced by fault afterslip. Such a rebound is explained by the gradual change of the crustal rocks' Poisson's ratio value from undrained (coseismic) to drained (postseismic) conditions as pore pressure gradients produced by the earthquake dissipate. Using the Poisson's ratio values of 0.27 and 0.31 for the drained and undrained crustal rocks, respectively, elastic dislocation models show that the combined contributions of afterslip on deep sections of the fault and poroelastic rebound can account for the range change observed in the SAR data and the horizontal displacement measured at Global Positioning System (GPS) sites along a 60-km-long transect across the Emerson fault [ Savage and Svarc , 1997]. Using a detailed surface slip distribution on the Homestead Valley, Kickapoo, and Johnson Valley faults, we modeled the poroelastic rebound in the Homestead Valley pull apart. A Poisson's ratio value of 0.35 for the undrained gouge rocks in the fault zone is required to account for the observed surface uplift in the 3.5 years following the earthquake. This large value implies a seismic velocity ratio V p /V s of 2.1, consistent with the observed low V s values of fault zone guided waves at shallow depth [ Li et al ., 1997]. The SAR data also reveal postseismic creep along shallow patches of the Eureka Peak and Burnt Mountain faults with a characteristic decay time of 0.8 years. Coseismic, dilatant hardening (locking process) followed by post-seismic, pore pressure controlled fault creep provide a plausible mechanism to account for the decay time of the observed slip rate along this section of the fault.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Closing the gap between regional and global travel time tomography

Recent global travel time tomography studies by Zhou [1996] and van der Hilst et al . [1997] have been performed with cell parameterizations of the order of those frequently used in regional tomography studies (i.e., with cell sizes of 1°–2°). These new global models constitute a considerable improvement over previous results that were obtained with rather coarse parameterizations (5° cells). The inferred structures are, however, of larger scale than is usually obtained in regional models, and it is not clear where and if individual cells are actually resolved. This study aims at resolving lateral heterogeneity on scales as small as 0.6° in the upper mantle and 1.2°–3° in the lower mantle. This allows for the adequate mapping of expected small-scale structures induced by, for example, lithosphere subduction, deep mantle upwellings, and mid-ocean ridges. There are three major contributions that allow for this advancement. First, we employ an irregular grid of nonoverlapping cells adapted to the heterogeneous sampling of the Earth's mantle by seismic waves [ Spakman and Bijwaard , 1998]. Second, we exploit the global data set of Engdahl et al . [1998], which is a reprocessed version of the global data set of the International Seismological Centre. Their reprocessing included hypocenter redetermination and phase reidentification. Finally, we combine all data used ( P , pP , and pwP phases) into nearly 5 million ray bundles with a limited spatial extent such that averaging over large mantle volumes is prevented while the signal-to-noise ratio is improved. In the approximate solution of the huge inverse problem we obtain a variance reduction of 57.1%. Synthetic sensitivity tests indicate horizontal resolution on the scale of the smallest cells (0.6° or 1.2°) in the shallow parts of subduction zones decreasing to approximately 2°–3° resolution in well-sampled regions in the lower mantle. Vertical resolution can be worse (up to several hundreds of kilometers) in subduction zones with rays predominantly pointing along dip. Important features of the solution are as follows: 100–200 km thick high-velocity slabs beneath all major subduction zones, sometimes flattening in the transition zone and sometimes directly penetrating into the lower mantle; large high-velocity anomalies in the lower mantle that have been attributed to subduction of the Tethys ocean and the Farallon plate; and low-velocity anomalies continuing across the 660 km discontinuity to hotspots at the surface under Iceland, east Africa, the Canary Islands, Yellowstone, and the Society Islands. Our findings corroborate that the 660 km boundary may resist but not prevent (present day) large-scale mass transfer from upper to lower mantle or vice versa. This observation confirms the results of previous, global mantle studies that employed coarser parameterizations.

Journal of Geophysical Research B: Solid Earth↗
USGS1999

Coseismic slip resolution along a plate boundary megathrust: the Nankai Trough, southwest Japan

Geodetic survey measurements are used to estimate the coseismic slip distribution in the 1944 Tonankai (M w =8.1) and 1946 Nankaido (M w =8.3) earthquakes and to assess quantitatively the degree to which this slip is resolved on the plate boundary megathrust. Data used include 798 angle changes from triangulation surveys, 328 leveling section differences, and 5 coseismic tidal gage offsets. Many of the nominally coseismic triangulation data span ∼50 years, nearly half the earthquake cycle, and correction for interseismic deformation using post-1950 observations is applied. Microseismicity is used to define the configuration of the plate boundary interface and approximate it with a continuous, multisegment fault model. Because the onshore geodetic data have very limited resolving power for offshore fault segments, offshore coseismic slip was constrained by Satctke's [1993] estimation based on tsunami data. The majority of the coseismic slip occurs between 15 and 25 km depth. Although resolution declines toward the trench axis, it is sufficiently good to define two distinct high-slip regions, one off southeastern Shikoku Island (11 m maximum) and the other offshore of Kii Peninsula (3 m maximum). The slip magnitude off southeastern Shikoku, coupled with the plate convergence rate, would imply an recurrence interval of about 270 years, much-longer than the average repeat time of ∼120 years for historical great earthquakes on the Nankai Trough. However, the maximum coseismic slip is sensitive to the assumed fault geometry, and slippage on trough-parallel splay faults could significantly decrease the maximum slip to about 6 m.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Greenland Sea Odden sea ice feature: Intra-annual and interannual variability

The “Odden” is a large sea ice feature that forms in the east Greenland Sea that may protrude eastward to 5°E from the main sea ice pack (at about 8°W) between 73° and 77°N. It generally forms at the beginning of the winter season and can cover 300,000 km 2 . Throughout the winter the outer edge of the Odden may advance and retreat by several hundred kilometers on timescales of a few days to weeks. Satellite passive microwave observations from 1978 through 1995 provide a continuous record of the spatial and temporal variations of this extremely dynamic phenomenon. Aircraft synthetic aperture radar, satellite passive microwave, and ship observations in the Odden show that the Odden consists of new ice types, rather than older ice types advected eastward from the main pack. The 17-year record shows both strong interannual and intra-annual variations in Odden extent and temporal behavior. For example, in 1983 the Odden was weak, in 1984 the Odden did not occur, and in 1985 the Odden returned late in the season. An analysis of the ice area and extent time series derived from the satellite passive microwave observations along with meteorological data from the International Arctic Buoy Program (IABP) determined the meteorological forcing associated with Odden growth, maintenance, and decay. The key meteorological parameters that are related to the rapid ice formation and decay associated with the Odden are, in order of importance, air temperature, wind speed, and wind direction. Oceanographic parameters must play an important role in controlling Odden formation, but it is not yet possible to quantify this role because of a lack of long-term oceanographic observations.

Journal of Geophysical Research C: Oceans↗
USGS1998

Winter and early spring CO2 efflux from tundra communities of northern Alaska

Carbon dioxide concentrations through snow were measured in different arctic tundra communities on the North Slope of Alaska during winter and early spring of 1996. Subnivean CO 2 concentrations were always higher than atmospheric CO 2 . A steady state diffusion model was used to generate conservative estimates of CO 2 flux to the atmosphere. The magnitude of CO 2 efflux differed with tundra community type, and rates of carbon release increased from March to May. Winter CO 2 efflux was highest in riparian and snow bed communities and lowest in dry heath, upland tussock, and wet sedge communities. Snow generally accrues earlier in winter and is deeper in riparian and snow bed communities compared with other tundra communities, which are typically windswept and do not accumulate much snow during the winter. These results support the hypothesis that early and deep snow accumulation may insulate microbial populations from very cold temperatures, allowing sites with earlier snow cover to sustain higher levels of activity throughout winter compared to communities that have later developing snow cover. Extrapolating our estimates of CO 2 efflux to the entire snow-covered season indicates that total carbon flux during winter in the Arctic is 13–109 kg CO 2 -C ha −1 , depending on the vegetation community type. Wintertime CO 2 flux is a potentially important, yet largely overlooked, part of the annual carbon cycle of tundra, and carbon release during winter should be accounted for in estimates of annual carbon balance in arctic ecosystems.

Journal of Geophysical Research D: Atmospheres↗
USGS1998

Analysis of simulated advanced spaceborne thermal emission and reflection (ASTER) radiometer data of the Iron Hill, Colorado, study area for mapping lithologies

The advanced spaceborne thermal emission and reflection (ASTER) radiometer was designed to record reflected energy in nine channels with 15 or 30 m resolution, including stereoscopic images, and emitted energy in five channels with 90 m resolution from the NASA Earth Observing System AMI platform. A simulated ASTER data set was produced for the Iron Hill, Colorado, study area by resampling calibrated, registered airborne visible/infrared imaging spectrometer (AVIRIS) data, and thermal infrared multispectral scanner (TIMS) data to the appropriate spatial and spectral parameters. A digital elevation model was obtained to simulate ASTER-derived topographic data. The main lithologic units in the area are granitic rocks and felsite into which a carbonatite stock and associated alkalic igneous rocks were intruded; these rocks are locally covered by Jurassic sandstone, Tertiary rhyolitic tuff, and colluvial deposits. Several methods were evaluated for mapping the main lithologic units, including the unsupervised classification and spectral curve-matching techniques. In the five thermalinfrared (TIR) channels, comparison of the results of linear spectral unmixing and unsupervised classification with published geologic maps showed that the main lithologic units were mapped, but large areas with moderate to dense tree cover were not mapped in the TIR data. Compared to TIMS data, simulated ASTER data permitted slightly less discrimination in the mafic alkalic rock series, and carbonatite was not mapped in the TIMS nor in the simulated ASTER TIR data. In the nine visible and near-infrared channels, unsupervised classification did not yield useful results, but both the spectral linear unmixing and the matched filter techniques produced useful results, including mapping calcitic and dolomitic carbonatite exposures, travertine in hot spring deposits, kaolinite in argillized sandstone and tuff, and muscovite in sericitized granite and felsite, as well as commonly occurring illite/muscovite. However, the distinction made in AVIRIS data between calcite and dolomite was not consistently feasible in the simulated ASTER data. Comparison of the lithologie information produced by spectral analysis of the simulated ASTER data to a photogeologic interpretation of a simulated ASTER color image illustrates the high potential of spectral analysis of ASTER data to geologic interpretation.

Journal of Geophysical Research D: Atmospheres↗
USGS2012

Television observations from Surveyor 3

A total of 6315 pictures were taken by the television camera on Surveyor 3 after the lunar landing. These pictures have provided much new information about the location of the landing site on the moon, the detailed topographic and geologic characteristics of the lunar surface, and the appearance of the earth as seen from the moon, both during eclipse of the sun and during partial direct illumination by the sun. Surveyor 3 landed in a subdued crater slightly more than 200 meters in diameter, which has a low rounded rim and is about 15 meters deep. The spacecraft is situated on the east wall of the crater, about half way between the center of the crater and the rim crest. The spacecraft is inclined 14.7° ± 1.0° toward the west. The selenographic coordinates of the landing site are 2.94°S latitude, 23.34°W longitude, relative to selenodetic control adopted by the Aeronautical Chart and Information Center. Small morphologic elements of the landing site include small craters, linear ridges and troughs, and fragmental debris. The craters and fragmental debris resemble those observed at the Surveyor 1 landing site, both in distribution of shape and in distribution of size. Most of the craters in Surveyor 1 and 3 pictures are inferred to be of impact origin. Their size-frequency distribution corresponds to the distribution that would be produced by repetitive bombardment by meteoroids, a bombardment sufficiently prolonged that the crater population has reached a steady state or has come to equilibrium. Some of the craters observed at the Surveyor 3 landing site are inferred to be of secondary impact origin, and some probably have been formed either by subsidence or by drainage of fragmental debris into cracks or fissures in the subsurface. Fragmental debris at the landing site is inferred to have been derived primarily by the same process of repetitive bombardment that produced the majority of craters. The inferred volumetric size-frequency distribution of fragments, derived from the observed size distribution of fragments on the surface, is similar to the distribution that would be produced by repetitive bombardment of coherent rocks by meteoroids with a mass-frequency distribution like that found from observed meteors and recovered meteorites on earth. Two prominent strewn fields of blocky debris were observed around two craters, 13 and 15 meters across, at the Surveyor 3 site. The 13-meter crater has a sharp raised rim, and the 15-meter crater has a more subdued rounded rim. The blocks associated with the subdued crater have twice as high a mean roundness as the blocks associated with the raised-rim crater, and they are much more deeply buried. The size-frequency distribution function for the fragments in each of the strewn fields of blocks resembles the size-frequency distribution for fragments ejected by impacts in strong rock, such as Meteor Crater, Arizona. Most of the fragments at the surface of the Surveyor 3 landing site are evidently part of a layer of fragmental material of low cohesion that is at least 1 meter thick along the upper parts of the wall of the crater in which Surveyor 3 landed and may be much thicker near the center of the crater. The evidence from the Surveyor 3 pictures suggests that this layer of debris, or regolith, is subject to downslope creep or mass movement. Creep is probably caused by seismic shaking, due mainly to near and far impact events and perhaps due partly to internal lunar seismicity. Disturbances of the lunar surface produced by Surveyor 3, like those produced by Surveyor 1, exposed material at depths of a few centimeters or less that was darker than the material at the surface. The albedo of the fine-grained fragmental debris is probably 20 to 30% lower at depths of only a fraction of a millimeter than it is at the optically observed surface. All coarse fragments protruding above the general level of the surface have a higher albedo than the fine-grained matrix of the surface. These general photometric relationships can be explained if it is assumed that the surfaces of the particles in the shallow lunar subsurface tend to become coated with a dark substance; the term proposed for this hypothetical substance is ‘lunar varnish’ On the protruding surface of blocks and coarse fragments the lunar varnish is scrubbed off by the processes that cause rounding. The exposed surfaces of fine particles on the lunar surface are similarly affected, but, because they are mixed relatively rapidly with particles just beneath the surface, the process is incomplete and the fine-grained material exposed at the lunar surface, therefore, has a lower albedo than blocks and other large fragments. Coating of particles by lunar varnish evidently takes place just beneath the surface. The estimated normal luminance factor (normal albedo) of an undisturbed part of the lunar surface next to footpad 2 of the Surveyor 3 spacecraft is 8.5%. An area of the lunar surface disturbed by the surface sampler has an estimated normal luminance factor of 6.6%, and fine-grained material placed on footpad 2 by the surface sampler has an estimated normal luminance factor of 7.6%. The errors in all these estimates may be as high as 25% because of uncertainties of correction required for light scattered from the camera mirror. Preliminary search for color differences, by color reconstitution methods, revealed no determinable differences in color among various coarse blocks, the fine-grained matrix of the surface, or fine-grained material disturbed by the surface sampler. Surveyor 3 pictures of the eclipse of the sun by the earth revealed a bright region in the refraction halo surrounding the earth, which was correlated with the position of the sun, and a series of bright beads that occurred over regions of the earth largely clear of clouds. Clouds tend to occult the refracted rays of the sun, most of which pass through the lower part of the atmosphere at the limb; the beads occurred in the depressions in the optical silhouette of the earth. Preliminary reduction of the color of the refracted light showed that the brightest region, near the position of the sun, exhibited a correlated color temperature close to 4800°K. The color temperature tended to be lower for light that followed paths of greater atmospheric absorption. Preliminary analysis of Surveyor 3 pictures of the partly illuminated earth revealed colors similar to the colors recorded from orbit by the Mercury and Gemini astronauts.

Journal of Geophysical Research↗
USGS2012

Lunar theory and processes

Despite the fact that the Surveyor 3 landed in a crater, the general appearance of the terrain is remarkably similar to that revealed by Surveyor 1. Evidence of the transport of material down the crater wall was observed. Some picture degradation occurred, apparently as a result of fine particulate lunar surface material being deposited on the TV system mirror during the unusual landing.

Journal of Geophysical Research↗
USGS2012

Rapid heat-flowing surveying of geothermal areas, utilizing individual snowfalls as calorimeters

Local differences in rate of heat transfer in vapor and by conduction through the ground in hot spring areas are difficult and time-consuming to measure quantitatively. Individual heavy snowfalls provide a rapid low-cost means of measuring total heat flow from such ground. After a favorable snowfall (heavy, brief duration, little wind, air temperature near 0°C), contacts between snow-covered and snow-free ground are mapped on a suitable base. Each mapped contact, as time elapses after a specific snowfall, is a heat-flow contour representing a decreasing rate of flow. Calibration of each mapped contact or snow line is made possible by the fact that snow remains on insulated surfaces (such as the boardwalks of Yellowstone's thermal areas) long after it has melted on adjacent warm ground. Heat-flow contours mapped to date range from 450 to 5500 μcal/cm 2 sec, or 300 to 3700 times the world average of conductive heat flow. The very high rates of heat flow (2000 to > 10,000 μcal/cm 2 sec) are probably too high, and the lower heat flows determinable by the method (<500 μcal/cm 2 sec) may be too low. Values indicated by the method are, however, probably within a factor of 2 of the total conductive and convective heat flow. Thermal anomalies from infrared imagery are similar in shape to heat-flow contours of a test area near Old Faithful geyser. Snowfall calorimetry provides a rapid means for evaluating the imagery and computer-derived products of the infrared data in terms of heat flow.

Yellowstone National Park↗
USGS2012

Implications of the Surveyor 7 results

The chemical and television data from the Surveyor 7 mission are discussed. The significance of the α-scattering analysis is found to depend on whether the flow unit underlying the spacecraft was laid down by mass flow at the time of the Tycho-forming impact. The chemical composition of the site is significantly lower in Fe than the composition of the previously analyzed mare sites; no other resolvable distinctions can be made. The higher albedo of the highlands is attributed to the lower iron content in the silicate minerals. By assigning the atomic composition to minerals common in basaltic rocks, we estimate-the highland rock density to be 3.0 and the mare density to be 3.2. The densities may be incorporated into a discussion of recent information on the gravitational field of the moon, yielding estimates of crustal thickness in the highlands around 30 to 50 km. A number of television pictures of rocks and fragments are shown, and we offer some suggestions about the type and origin of these objects. They compose a heterogeneous population in which the brighter rocks seem to be more resistant to mechanical breakdown than the dark rocks. The characteristics of the fine-grained component of the surface mantle are found to be similar to those at earlier Surveyor sites. The process of eroding exposed rocks and covering them with a blanket of fine particles appears to be relatively less advanced than at the sites previously studied; A bright line of light was seen on the western horizon after sunset, as was observed during Surveyor 5 and 6; this rather puzzling phenomenon is discussed again.

Journal of Geophysical Research↗
USGS2012

Observations of the lunar regolith and the Earth from the television camera on Surveyor 7

Surveyor 7, the last spacecraft of the Surveyor series, landed about 30 km north of the rim crest of Tycho, one of the most prominent and well-known features in the southern part of the moon. About 21,000 pictures were transmitted during two lunar days of operation. At the Surveyor 7 site, the cumulative size-frequency distribution of craters 13 cm to 3 meters in diameter follows closely the distribution of craters observed at the other Surveyor sites in the lunar maria. This distribution of small craters is believed to be a steady-state distribution.

Journal of Geophysical Research↗
USGS2012

Surface coating effects in remote sensing measurements

Measurements of the infrared spectra of a liquid-(water) coated quartz substrate and a solid-(pyrophyllite) coated quartzite are compared to theoretical values. Results demonstrate that in the case of the water-coated quartz, a loss in spectral contrast of the quartz emission occurs at the principal restrahlen wavelengths of 8.5, 9.0, and 12.5 µ but is most pronounced at 12.5 µ. In the case of pyrophyllite-coated quartzite, additional spectral features appear between 8.0 and 10.0 µ as the exposure of quartzite through the pyrophyllite coating is increased. Addition of the pure quartzite and pyrophyllite spectra, weighted by exposed area, is shown to satisfactorily describe the composite spectra.

Journal of Geophysical Research↗
USGS2012

Energy and plane waves in linear viscoelastic media

The mathematical framework for describing plane waves in elastic and linear anelastic media is presented. Theoretical results suggest that the nature of plane waves in anelastic materials is distinctly different from the nature of plane waves in elastic materials. In elastic media the only type of inhomogeneous plane wave ( P or S ) that can propagate is one for which planes of constant phase are perpendicular to planes of constant amplitude. However, in anelastic media this is the only type of inhomogeneous wave that cannot propagate. For an inhomogeneous P or S plane wave the particle motion is elliptical, the velocity is less than that of a corresponding homogeneous wave, the maximum attenuation is greater than that of a corresponding homogeneous wave, and the direction of maximum energy flow is not the direction of phase propagation. Expressions for the energy flux, energy densities, dissipated energy, stored energy, and Q −1 are derived from an explicit energy conservation relation, valid for an arbitrary steady state viscoelastic radiation field. Each energy expression is valid for homogeneous or inhomogeneous P or S plane waves in elastic or linear anelastic media.

Journal of Geophysical Research↗
USGS2012

Geochemistry of thermal waters in Long Valley, Mono County, California

Thermal springs and wells in Long Valley, California, issue sodium bicarbonate‐chloride waters containing 1000–1420 mg/l of dissolved solids. Thermal waters of sodium bicarbonate‐chloride composition are usually associated with hot‐water reservoirs. Chloride concentrations and stable isotope data indicate that the thermal waters have had varied histories. All of the thermal springs issue a mixture of fluid from the thermal reservoir and less saline, cooler water from one or more shallow aquifers. The composition of springs in Hot Creek Gorge may have been further altered by minor subsurface boiling. Thermal springs between Hot Creek and Lake Crowley issue mixtures of fresh and thermal waters which have lost heat by conductive cooling and changed composition by reaction with rock in the shallow aquifer. The silica content of water from Magma Richie 5 and mixing calculations based on the concentrations of silica in thermal waters collected from springs in Hot Creek Gorge and along Little Hot Creek indicate a temperature of at least 200°C in the thermal reservoir. The sodium‐potassium‐calcium geothermometer yields a reservoir temperature estimate near 200°C for most of the thermal springs. If geothermal energy is developed in Long Valley, the high concentrations of arsenic (up to 2.2 mg/l), boron (up to 15 mg/l), and total dissolved solids in the thermal fluids will make it necessary to isolate the effluent of production wells from the freshwater system.

California↗
USGS2012

Preseismic and coseismic deformation associated with the Hollister, California, earthquake of November 28, 1974

The epicenter of the Hollister earthquake ( M L = 5.1) of November 28, 1974, is located near the center of an 81‐line trilateration network which has been surveyed annually since 1971. Five lines in the neighborhood of the epicenter were surveyed just 2 days before the earthquake, and two other lines nearby were surveyed 48 days earlier. Although some of these measurements suggest a possible preearthquake anomaly in line length, the anomaly is within the uncertainty in measurement. A comparison of the most recent preearthquake survey (June 1974) and the most immediate postearthquake survey (December 1974 to January 1975) of the entire network indicates a uniform linear contraction of about 0.8 ppm. This is most reasonably attributed to survey error even though a systematic error of that magnitude is unexpected. We conclude that no demonstrable preseismic or coseismic deformation was detected and suggest that an upper limit for these phenomena is less than 1 ppm in line length. A reasonable dislocation model for the Hollister earthquake yields coseismic changes in line length not greater than a few parts in 10 7 , well below the limit of detection in Geodolite surveys.

California↗
USGS2012

Determination of three‐dimensional velocity anomalies under a seismic array using first P arrival times from local earthquakes: 1. A homogeneous initial model

Geiger's method of locating local earthquakes has been extended to include the effect of P velocity variation along the ray paths in three dimensions. The crustal structure was modeled by rectangular blocks, and a parameter was assigned to each block describing the perturbation of P wave slowness in the block. On the basis of an initial model, a set of linear equations for the observed first P arrival times was formulated in terms of the source and medium parameters. The source parameters for all the earthquakes in the data set and medium parameters for all the blocks penetrated by the seismic rays were then determined simultaneously by the damped least squares method. A computer program has been written for the case of a homogeneous initial medium model with constant P velocity. It has been tested with artificial data and applied to a set of local earthquakes recorded by a dense seismic array in Bear Valley, California. The resultant velocity distribution in the top 5 km shows a narrow low‐velocity zone of about 5 km/s in the San Andreas fault zone sandwiched between high‐velocity regions of about 6 km/s.

California↗