SEARCH · Search USGS

Results for “The Seismic Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

USGS2011

Some possible causes of and corrections for STS-1 response changes in the Global Seismographic Network

The Global Seismographic Network (GSN) (Figure 1) plays a key role in providing seismic data for global earthquake monitoring ( e.g. , Benz et al. 2005), earthquake science ( e.g. , Tsai et al. 2005), and studies of Earth structure ( e.g. , Dalton et al. 2008). One of the key GSN design goals is to "provide high fidelity digital recordings of all teleseismic ground motions (adequate to resolve at or near ambient noise up to the largest teleseismic signals over the bandwidth from free oscillations (10 -4 Hz) to teleseismic body waves (up to approximately 15 Hz))" (GSN ad hoc Design Goals Subcommittee 2002). To help meet this goal, Streckeisen STS-1 seismometers were deployed at 80 GSN stations. Some of the GSN sensors have been deployed for more than 25 years. Several recent studies (Davis et al. 2005; Ekström et al. 2006; Davis and Berger 2007) have examined the question of overall calibration of the GSN. Ekström et al. (2006) indicated that a number of sites showed anomalous responses and suggested a gradual decay in the sensitivity. We have investigated the anomalous responses at several GSN sites. At least some of the problems observed by Ekström et al. (2006) may be attributed to humid air leaking into the feedback electronics of the STS-1 seismometers, which produces lower than normal sensitivities near the long-period corner of the instrument (360 seconds period). It appears that even though the feedback electronics boxes are designed to be sealed, water vapor can penetrate their interior after they have been exposed to highly humid seismometer vault air for extended periods. Highly humid air was also found to be present inside some STS-1 bell-jars (especially horizontal instruments) after loss of vacuum, resulting in corrosion and leakage between electrical conductors in connectors.

Seismological Research Letters↗

USGS2001

Vertical tectonics in northern Escanaba Trough as recorded by thick late Quaternary turbidites

Escanaba Trough, the southernmost segment of the Gorda Ridge, is filled by as much as 500 m of late Quaternary turbidite and hemipelagic sediment. Coring at Deep Sea Drilling Project Site 35 and Ocean Drilling Program (ODP) Sites 1037 and 1038 together with 4.5-kHz deep-tow and 3.5-kHz surface-ship seismic reflection profiles enable a distinct pattern of reflections to be mapped throughout Escanaba Trough in the upper part of this sediment fill. The uppermost 80 m of turbidite sediment, which includes at least 11 turbidity current events, were deposited in <7 kyr. Nine of these turbidites are found throughout Escanaba Trough at water depths >3200 m. The turbidity currents were trapped upon entering Escanaba Trough, resulting in all of the sediment in suspension in the flows being deposited. The thickness of the turbidite layers reflects both the flow thickness and the vertical grain concentration within the flow that deposited the layer. Variations in the turbidite thickness with respect to water depth can be used to estimate the degree of relative vertical movement within the floor of Escanaba Trough. In the area of hydrothermal activity near ODP Site 1038, uplift of as much as 140 m has occurred over the past 8 kyr.

California↗

USGS2016

Adjusting central and eastern North America ground-motion intensity measures between sites with different reference-rock site conditions

Adjustment factors are provided for converting ground‐motion intensity measures between central and eastern North America (CENA) sites with different reference‐rock site conditions ( V S 30 =760, 2000, and 3000 m/s) for moment magnitudes ranging from 2 to 8, rupture distances ranging from 2 to 1200 km, Fourier amplitude spectra (FAS) for frequencies ranging from 0.01 to 100 Hz, response spectra for periods ranging from 0.01 to 10.0 s, peak ground acceleration, and peak ground velocity. The adjustment factors are given for a wide range of the site diminution parameters ( κ 0 ) for sites with V S 30 =760 m/s and for a κ 0 of 0.006 s for two harder rock sites. Fourteen CENA velocity profiles with V S 30 values within a factor of 1.1 of 760 m/s were used to derive average FAS amplification factors as a function of frequency, which were then used in simulations of peak ground‐motion parameters and response spectra to derive the adjustment factors. The amplification function differs from that used in western North America (e.g., Campbell and Boore, 2016 ) in having a peak near 9 Hz, due to the resonance of motions in the relatively thin low‐velocity material over hard rock that characterizes many CENA sites with V S 30 near 760 m/s. We call these B/C sites, because this velocity marks the boundary between National Earthquake Hazards Reduction Program site classes B and C ( Building Seismic Safety Council, 2004 ). The adjustments for short‐period motions are sensitive to the value of κ 0 , but there are very few if any determinations of κ 0 for CENA B/C sites. For this reason, we determined κ 0 from multiple recordings at Pinyon Flat Observatory (PFO), California, which has a velocity‐depth profile similar to those of CENA B/C sites. The PFO and other results from the literature suggest that appropriate values of κ 0 for CENA B/C sites are expected to lie between 0.01 and 0.03 s.

Bulletin of the Seismological Society of America↗

USGS1991

Initiation processes and flow evolution of turbidity currents: Implications for the depositional record

Interpretations of sea-level change and source-area tectonism from the character of turbidite deposits require knowledge of the sediment source, the flow-initiation process, how the turbidity current evolved during flow, and what flow phases were associated with deposition. The flow responds to shape and size characteristics of both the erosional pathway and the morphology of previous deposits; these, in turn, reflect factors such as basin size, shape, and tectonic activity. The initiation of turbidity currents generally involves either transformation from mass failures or one of a variety of fluid-flow events involving ignitive flow. The variability of these initiating processes with geologic setting is illustrated by analysis of three case studies involving 1) initiation by storm surge on a carbonate-reef slope, 2) a seismically triggered failure of a line source within midslope sediment, and 3) a bedload delta showing both hyperpycnal flow of river bedload and failure of unstable prodelta sediment. General criteria for the initiation of turbidity currents are given. Depositional and erosional features of the turbidite deposits themselves allow recognition of changes in flow processes as the turbidity currents traverse the basin. High-concentration basal flow beneath the main turbulent turbidity current will leave a distinctive depositional record from more energetic flow, particularly in proximal and channel settings. Turbidity currents of different sizes and sediment distribution interact quite differently with local fan morphology. Many large, muddy turbidity currents are much thicker than levee-channel relief; the upper parts of such flows are "stripped off" across levees and can become rechannelized farther downslope. in restricted basins, the basin margin acts like a channel wall for larger flows, thus maintaining competence over long distances. Thinner, sandier flows flush out channel systems, and a large proportion of sediment in some turbidite deposits may be derived from bed erosion. A broad range of local bedforms, especially sediment waves and scours, reflects changes in the character of turbulence and competence within quasi-steady flows. This paper emphasizes the broad range of size, sediment distribution, and depositional processes in turbidity currents that largely reflects the variety of initiation processes. This variability means that caution is needed when interpreting depositional conditions of ancient turbidite sediment with ill-defined morphologic setting.

Book chapter↗

USGS1979

Preliminary catalog of earthquakes in northern Imperial Valley, California, October 1978-December 1978

The northern section of the Imperial Valley region in southern California is an area of known geothermal resources and high seismicity. To investigate the relationship between geothermal areas and earthquakes in the Imperial Valley, a 16-station seismic network was established in early 1973 by the U. S. Geological Survey. Six more stations were added to the network in November 1976. This catalog contains a description of the network and a list of preliminary data on earthquakes detected and recorded by the network from October 1978 through December 1973.

California↗

USGS2018

Damage accumulation for a two-story wood-frame building in sequences of induced earthquakes

In this study, a nonlinear model of a two-story multifamily wood-frame residential structure is subjected to recordings of sequences of induced earthquakes in order to quantify changes in fragility and accumulation of damage throughout multiple earthquake loadings. Initial efforts consisting of ground motion selection, building design, numerical modeling, and preliminary results are presented. Damage is quantified through a seismic loss estimation procedure that accounts for damage to nonstructural and structural components of the building. Examining damage accumulation from sequential earthquake shaking enables us to explore how the occurrence of damage in an earthquake, even to relatively small levels, may increase a structure’s susceptibility to collapse or damage in subsequent ground shaking. Ultimately, the goal is to compare damage fragilities and seismic losses as a function of the building’s initial damage state.

Kansas, Oklahoma↗

USGS2006

Ground deformation associated with the precursory unrest and early phases of the January 2006 eruption of Augustine volcano, Alaska

On January 11, 2006 Augustine Volcano erupted after nearly 20 years of quiescence. Global Positioning System (GPS) instrumentation at Augustine, consisting of six continuously recording, telemetered receivers, measured clear precursory deformation consistent with a source of inflation or pressurization beneath the volcano's summit at a depth of around sea level. Deformation began in early summer 2005, and was preceded by a subtle, but distinct, increase in seismicity, which began in May 2005. After remaining more or less constant, deformation rates accelerated on at least three stations beginning in late November 2005. After this date, GPS data suggest the upward propagation of a small dike into the edifice, which, based on the style of deformation and high levels of gas emission, appears to have ascended to shallow levels by mid-December 2005, about four weeks before the eruption began.

Alaska↗

USGS2017

Miocene−Pleistocene deformation of the Saddle Mountains: Implications for seismic hazard in central Washington, USA

The Yakima fold province, located in the backarc of the Cascadia subduction zone, is a region of active strain accumulation and deformation distributed across a series of fault-cored folds. The geodetic network in central Washington has been used to interpret large-scale N-S shortening and westward-increasing strain; however, geodetic data are unable to resolve shortening rates across individual structures in this low-strain-rate environment. Resolving fault geometries, slip rates, and timing of faulting in the Yakima fold province is critically important to seismic hazard assessment for nearby infrastructure and population centers. The Saddle Mountains anticline is one of the most prominent Yakima folds. It is unique within the Yakima fold province in that the syntectonic strata of the Ringold Formation are preserved and provide a record of deformation and drainage reorganization. Here, we present new stratigraphic columns, U-Pb zircon tephra ages, U-series caliche ages, and geophysical modeling that constrain two line-balanced and retrodeformed cross sections. These new constraints indicate that the Saddle Mountains anticline has accommodated 1.0−1.3 km of N-S shortening since 10 Ma, that shortening increases westward along the anticline, and that the average slip rate has increased 6-fold since 6.8 Ma. Provenance analysis suggests that the source terrane for the Ringold Formation was similar to that of the modern Snake River Plain. Using new slip rates and structural constraints, we calculate the strain accumulation time, interpretable as a recurrence interval, for earthquakes on the Saddle Mountains fault and find that large-magnitude earthquakes could rupture along the Saddle Mountains fault every 2−11 k.y.

Washington↗

USGS2012

Deep-Sea Turbidites as Guides to Holocene Earthquake History at the Cascadia Subduction Zone—Alternative Views for a Seismic-Hazard Workshop

This report reviews the geological basis for some recent estimates of earthquake hazards in the Cascadia region between southern British Columbia and northern California. The largest earthquakes to which the region is prone are in the range of magnitude 8-9. The source of these great earthquakes is the fault down which the oceanic Juan de Fuca Plate is being subducted or thrust beneath the North American Plate. Geologic evidence for their occurrence includes sedimentary deposits that have been observed in cores from deep-sea channels and fans. Earthquakes can initiate subaqueous slumps or slides that generate turbidity currents and which produce the sedimentary deposits known as turbidites. The hazard estimates reviewed in this report are derived mainly from deep-sea turbidites that have been interpreted as proxy records of great Cascadia earthquakes. The estimates were first published in 2008. Most of the evidence for them is contained in a monograph now in press. We have reviewed a small part of this evidence, chiefly from Cascadia Channel and its tributaries, all of which head offshore the Pacific coast of Washington State. According to the recent estimates, the Cascadia plate boundary ruptured along its full length in 19 or 20 earthquakes of magnitude 9 in the past 10,000 years; its northern third broke during these giant earthquakes only, and southern segments produced at least 20 additional, lesser earthquakes of Holocene age. The turbidite case for full-length ruptures depends on stratigraphic evidence for simultaneous shaking at the heads of multiple submarine canyons. The simultaneity has been inferred primarily from turbidite counts above a stratigraphic datum, sandy beds likened to strong-motion records, and radiocarbon ages adjusted for turbidity-current erosion. In alternatives proposed here, this turbidite evidence for simultaneous shaking is less sensitive to earthquake size and frequency than previously thought. Turbidites far below a channel confluence, instead of representing the merged flows from two tributaries, monitor the dominant tributary only. Sandy beds low in the turbidites, instead of matching from channel to channel, permit divergent stratigraphic correlations; and rather than approximating strong-motion seismograms, the sandy beds more likely record processes internal to the generation and transformation of subaqueous mass movements. The age adjustments, instead of supporting other evidence that all the northern ruptures were long, are uncertain enough to accord with variation in rupture mode, and this variation improves agreement with onshore paleoseismology. Many of the turbidites counted as evidence for frequent earthquakes on the southern Cascadia plate boundary may instead reflect nearness to steep slopes. This report is meant to aid in the updating of national maps of seismic hazards in Canada and the United States. It offers three main conclusions for consideration at a U.S. hazard-map workshop slated for March 21-22, 2012: If giant earthquakes are the norm for the plate boundary offshore southern Washington, the strongest paleoseismic evidence for this rupture mode is the average earthquake-recurrence interval of about 500 years that is evidenced both offshore in lower Cascadia Channel and onshore at estuaries of southern Washington and northernmost Oregon. The plate boundary offshore southern British Columbia and northern Washington may be capable of producing great earthquakes at an average interval as short as 300 years that is evidenced mainly onshore. Review of more of the turbidite evidence now in press may clarify implications for the hazard maps. Further work on the deep-sea turbidites could target sedimentary processes and chronological uncertainties that may affect the turbidites' sensitivity to fault-rupture lengths and recurrence rates.

Washington;Oregon;California↗

USGS2025

Surface-wave relocation and characterization of the October 2023 tsunamigenic seismic unrest near Sofugan volcano, Izu Islands, Japan

A moderate-magnitude earthquake swarm occurred in the remote Izu Islands region of Japan between October 1 and 8, 2023. The swarm included 151 shallow earthquakes cataloged by the U.S. Geological Survey, which notably included a roughly 2.5-hr episode of 15 successive magnitude (M) < 5.5 earthquakes. Origin times were coincident with regionally recorded tsunami waves, but tsunamigenesis for moderate-magnitude earthquakes is uncommon, indicating that volcanic activity generated the ocean displacements. Leveraging a surface-wave relative relocation approach, we estimate precise epicentroid locations for the remote swarm. Final epicentroids and caldera analogs indicate a three-stage model to explain swarm activity: (a) caldera pressurization due to magma intrusion, (b) depressurization via dike propagation away from the caldera, and (c) eruption corresponding with caldera reactivation either by collapse or additional intrusion.

Sofugan volcano, Izu Islands↗

USGS2011

Summary of November 2010 meeting to evaluate turbidite data for constraining the recurrence parameters of great Cascadia earthquakes for the update of national seismic hazard maps

This report summarizes a meeting of geologists, marine sedimentologists, geophysicists, and seismologists that was held on November 18–19, 2010 at Oregon State University in Corvallis, Oregon. The overall goal of the meeting was to evaluate observations of turbidite deposits to provide constraints on the recurrence time and rupture extent of great Cascadia subduction zone (CSZ) earthquakes for the next update of the U.S. national seismic hazard maps (NSHM). The meeting was convened at Oregon State University because this is the major center for collecting and evaluating turbidite evidence of great Cascadia earthquakes by Chris Goldfinger and his colleagues. We especially wanted the participants to see some of the numerous deep sea cores this group has collected that contain the turbidite deposits. Great earthquakes on the CSZ pose a major tsunami, ground-shaking, and ground-failure hazard to the Pacific Northwest. Figure 1 shows a map of the Pacific Northwest with a model for the rupture zone of a moment magnitude M w 9.0 earthquake on the CSZ and the ground shaking intensity (in ShakeMap format) expected from such an earthquake, based on empirical ground-motion prediction equations. The damaging effects of such an earthquake would occur over a wide swath of the Pacific Northwest and an accompanying tsunami would likely cause devastation along the Pacifc Northwest coast and possibly cause damage and loss of life in other areas of the Pacific. A magnitude 8 earthquake on the CSZ would cause damaging ground shaking and ground failure over a substantial area and could also generate a destructive tsunami. The recent tragic occurrence of the 2011 M w 9.0 Tohoku-Oki, Japan, earthquake highlights the importance of having accurate estimates of the recurrence times and magnitudes of great earthquakes on subduction zones. For the U.S. national seismic hazard maps, estimating the hazard from the Cascadia subduction zone has been based on coastal paleoseismic evidence of great earthquakes over the past 5,000 years. The instrumental catalog of earthquakes is of little use for constraining the hazard of the CSZ, because there are virtually no recorded earthquakes on most of the plate interface of the CSZ. There are no historical accounts in the past 150 years of large earthquakes on most of the CSZ. Until about 20 years ago, some interpreted this lack of recent and historical earthquakes as an indicator that the subduction zone was slipping aseismically and could not produce a great earthquake. The work of Brian Atwater and others, in the late 1980s and the 1990s (Atwater, 1987, 1992; Atwater and others, 1995; Nelson and others, 1996; Clague, 1997; Atwater and Hemphill-Haley, 1997; Atwater and others, 2004) demonstrated that submerged forests, buried soils, tsunami deposits, and liquefaction along and near the coast were compelling evidence of repeated great Cascadia earthquakes over at least the past 5,000 years. Atwater and Hemphill-Haley (1997) concluded from paleoseismic evidence at Willapa Bay, Washington, that great earthquakes ruptured the CSZ with an average recurrence time of about 500 years. The date of the last great CSZ earthquake, January 26, 1700, was established from historical records of the so-called orphan tsunami in Japan that is inferred to have been produced by this earthquake (Satake and others, 1996, 2003; Atwater and others, 2005) and is consistent with tree-ring data from drowned forests in Washington and Oregon. From modeling the observations of the tsunami, Satake and others (2003) estimated a moment magnitude of about 9.0 for this earthquake. Many other paleoseismic sites have been investigated along the Pacific Northwest coast from Vancouver Island to northern California and show evidence of great CSZ earthquakes. Nelson and others (2006) summarized the dates found from these studies and proposed correlations between sites indicating the extent of rupture for individual events. Dating of inferred tsunami deposits in Bradley Lake, Oregon by Kelsey and others (2005), as well as tsunami and subsidence evidence from Six Rivers, Oregon (Kelsey and others, 2002) and Coquille River (Witter and others, 2003), indicates that there were probably M w 8 ruptures in the southern portion of the CSZ in addition to the M w 9 events that rupture the whole length of the CSZ (Nelson and others, 2006). A parallel development over the past 20 years or more is the use of deep-sea turbidite deposits for identifying and dating great Cascadia earthquakes over the past 10,000 years (Adams, 1990; Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Turbidites are sediment deposits in the deep ocean from turbidity currents, which are energetic flows of sediment and water along the continental shelf and slope. Adams (1990), using the counts of turbidites in deep-sea cores off the coast of Oregon and Washington collected and analyzed by Griggs (1969) and Griggs and others (1969), proposed that these turbidites were caused by the shaking of great Cascadia earthquakes. Part of his reasoning was that the number (13) of turbidite deposits that occurred since deposition of the Mazama Ash 7,000 years ago gave a recurrence time of about 500 years, consistent with that derived from the coastal submergence data. Adams (1990) also proposed the “confluence test” which evaluates the number of turbidites for submarine channels that form a confluence. He reported that the number of turbidites in the single downstream channel equaled the number in each of the tributary channels. He reasoned that this indicated that the turbidites in each tributary were simultaneously triggered and were, therefore, caused by a common forcing agent. He concluded that shaking from extended ruptures of great Cascadia earthquakes was the most likely cause of these turbidites. Based on the paleoseismic evidence of past great earthquakes, the hazard from the Cascadia subduction zone was included in the 1996 U.S. NSHM (Frankel and others, 1996), which were the basis for seismic provisions in the 2000 International Building Code. These hazard maps used the paleoseismic studies to constrain the recurrence rate of great CSZ earthquakes. Goldfinger and his colleagues have since collected many more deep ocean cores and done extensive analysis on the turbidite deposits that they identified in the cores (Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Using their dating of the sediments and correlation of features in the logs of density and magnetic susceptibility between cores, they developed a detailed chronology of great earthquakes along the CSZ for the past 10,000 years (Goldfinger and others, in press). These correlations consist of attempting to match the peaks and valleys in logs of density and magnetic susceptibility between cores separated, in some cases, by hundreds of kilometers. Based on this work, Goldfinger and others (2003, 2008, in press) proposed that the turbidite evidence indicated the occurrence of great earthquakes (M w 8) that only ruptured the southern portion of the CSZ, as well as earthquakes with about M w 9 that ruptured the entire length of the CSZ. For the southernmost portion of the CSZ, Goldfinger and others (in press) proposed a recurrence time of M w 8 or larger earthquakes of about 230 years. This proposed recurrence time was shorter than the 500 year time that was incorporated in one scenario in the NSHM’s. It is important to note that the hazard maps of 1996 and later also included a scenario or set of scenarios with a shorter recurrence time for M w 8 earthquakes, using rupture zones that are distributed along the length of the CSZ (Frankel and others, 1996; Petersen and others, 2008). Originally, this scenario was meant to correspond to the idea that some of the 500-year averaged ruptures seen in the paleoseismic evidence could have been a series of M w 8 earthquakes that occurred over a short period of time (a few decades), rather than M w 9 earthquakes. Figure 2 shows the logic tree for the CSZ used in the 2008 NSHM’s (Petersen and others, 2008). This logic tree includes whole CSZ rupture earthquakes (M w 8.8–9.2) and partial CSZ rupture earthquakes (M w 8.0–8.7). In this latest version of the NSHM’s, the effective recurrence time of earthquakes on the CSZ with moment magnitudes greater than or equal to 8.0 over the various models is about 270 years (Petersen and others, 2008). This recurrence time applies to the entire CSZ, so that the hazard from great earthquakes was approximately equal along the whole zone, although the hazard estimates taper on the northern and southern ends of the CSZ, because of the way rupture zones of M w 8 earthquakes were distributed along the strike of the CSZ. The NSHM will be updated in 2013, as part of the standard update cycle that corresponds to the update cycle of the national model building codes that are based on the seismic hazard maps. A meeting was necessary to assemble a wide group of experts to hear Dr. Goldfinger explain his methodology for dating and correlating the turbidites and for developing the earthquake chronology. The overall goal of the workshop was to evaluate observations of turbidite deposits to provide constraints on the recurrence times and rupture extents of great Cascadia subduction zone earthquakes for the next update of the NSHM. Before the meeting, participants were supplied with the U.S. Geological Survey (USGS) Professional Paper of Goldfinger and others (in press), as well as material from Brian Atwater and Alan Nelson. The agenda of the meeting was developed by Art Frankel, with assistance from Chris Goldfinger, Brian Atwater, Alan Nelson, Mark Petersen, and Craig Weaver. The meeting was hosted by Chris Goldfinger of Oregon State University. We stress that it is difficult to evaluate in a two-day meeting the large amount of work that Goldfinger and his colleagues have done over the past 15 years or more. This meeting is the first step in a process that develops the inputs to the update of the national maps. The conclusions of this workshop will be discussed and possibly modified at the regional Pacific Northwest workshop for the hazard maps to be held in early 2012. Vetting new research results using informed expert opinion is an integral part of updating the national maps and does not reflect on the veracity of these results.

Cascadia↗

USGS2026

Suitability of ground-motion models for seismic hazard assessment in Puerto Rico and the U.S. Virgin Islands

We perform linear mixed-effects analyses with a ground-motion dataset to evaluate how well ground-motion models (GMMs) fit active crustal, subduction interface, and subduction intraslab earthquakes in Puerto Rico and the US Virgin Islands. Most of the GMMs reproduce the spatial variation in peak ground motions with earthquake magnitude and rupture distance but predict ground motions 0.3–1.0 natural log units (35%–270%) greater than observations. Two GMMs developed for Puerto Rico that are based on ground-motion records from mostly magnitude 4–5 earthquakes do not perform as well. We attribute the period-dependent overprediction in observed ground motions to differences between the observed site response and the linear site response in the GMMs. Consequently, we developed region-specific GMMs by adjusting the period-dependent linear site response coefficients and period-dependent constant coefficients to remove most of the bias between predicted ground motions and observations. For the analysis, we compile ground-motion records and process waveforms to build a dataset with 10,127 records at 72 stations from 849 magnitude 4.0–6.4 earthquakes between 1 January 2006 and 31 March 2024. The earthquakes include active crustal, subduction interface, and subduction intraslab events. We evaluate the GMMs using the time-averaged shear wave speed in the top 30 m ( ), which we compile from site surveys and proxy values computed from horizontal to vertical spectral ratios. Site terms exhibit strong consistency across GMMs and crustal and subduction earthquakes, indicating that the linear mixed-effects analysis successfully isolates the effects of local site response. The event terms show little spatial correlation and more substantial variability than in other regions, which we attribute to uncertainties in the earthquake magnitudes. This analysis guides the selection of the GMMs for the 2025 update of the National Seismic Hazard Model for Puerto Rico and the US Virgin Islands.

Puerto Rico, U.S. Virgin Islands↗

USGS2019

Depth determination of the 2010 El Mayor‐Cucapah earthquake sequence (M ≥ 4.0)

The 2010 M W 7.2 El Mayor‐Cucapah earthquake ruptured a zone of ~120 km in length in northern Baja California. The geographic distribution of this earthquake sequence was well constrained by waveform relocation. The depth distribution, however, was poorly determined as it is near the edge of, or outside, the Southern California Seismic Network. Here we use two complementary methods to constrain the focal depths of moderate‐sized events ( M ≥ 4.0) in this sequence. We first determine the absolute earthquake depth by modeling the regional depth phases at high frequencies (~1 Hz). We mainly focus on Pn and its depth phases pPn and sPn , which arrive early at regional distance and are less contaminated by crustal multiples. To facilitate depth phase identification and to improve signal‐to‐noise ratio, we take advantage of the dense Southern California Seismic Network and use array analysis to align and stack Pn waveforms. For events without clear depth phases, we further determine their relative depths with respect to those with known depths using differential travel times of the Pn , direct P , and direct S phases recorded for event pairs. Focal depths of 93 out of 122 M ≥ 4.0 events are tightly constrained with absolute uncertainty of about 1 km. Aftershocks are clustered in the depth range of 3–10 km, suggesting a relatively shallow seismogenic zone, consistent with high surface heat flow in this region. Most aftershocks are located outside or near the lower terminus of coseismic high‐slip patches of the main shock, which may be governed by residual strains, local stress concentration, or postseismic slip.

Baja California↗

USGS2021

Geomorphic expression and slip rate of the Fairweather fault, southeast Alaska, and evidence for predecessors of the 1958 rupture

Active traces of the southern Fairweather fault were revealed by light detection and ranging (lidar) and show evidence for transpressional deformation between North America and the Yakutat block in southeast Alaska. We map the Holocene geomorphic expression of tectonic deformation along the southern 30 km of the Fairweather fault, which ruptured in the 1958 moment magnitude 7.8 earthquake. Digital maps of surficial geology, geomorphology, and active faults illustrate both strike-slip and dip-slip deformation styles within a 10°–30° double restraining bend where the southern Fairweather fault steps offshore to the Queen Charlotte fault. We measure offset landforms along the fault and calibrate legacy 14 C data to reassess the rate of Holocene strike-slip motion (≥49 mm/yr), which corroborates published estimates that place most of the plate boundary motion on the Fairweather fault. Our slip-rate estimates allow a component of oblique-reverse motion to be accommodated by contractional structures west of the Fairweather fault consistent with geodetic block models. Stratigraphic and structural relations in hand-dug excavations across two active fault strands provide an incomplete paleoseismic record including evidence for up to six surface ruptures in the past 5600 years, and at least two to four events in the past 810 years. The incomplete record suggests an earthquake recurrence interval of ≥270 years—much longer than intervals <100 years implied by published slip rates and expected earthquake displacements. Our paleoseismic observations and map of active traces of the southern Fairweather fault illustrate the complexity of transpressional deformation and seismic potential along one of Earth's fastest strike-slip plate boundaries.

Alaska↗

USGS2013

Late quaternary slip-rate variations along the Warm Springs Valley fault system, northern Walker Lane, California-Nevada border

The extent to which faults exhibit temporally varying slip rates has important consequences for models of fault mechanics and probabilistic seismic hazard. Here, we explore the temporal behavior of the dextral‐slip Warm Springs Valley fault system, which is part of a network of closely spaced (10–20 km) faults in the northern Walker Lane (California–Nevada border). We develop a late Quaternary slip record for the fault using Quaternary mapping and high‐resolution topographic data from airborne Light Distance and Ranging (LiDAR). The faulted Fort Sage alluvial fan (40.06° N, 119.99° W) is dextrally displaced 98+42/-43 m, and we estimate the age of the alluvial fan to be 41.4+10.0/-4.8 to 55.7±9.2 ka, based on a terrestrial cosmogenic 10 Be depth profile and 36 Cl analyses on basalt boulders, respectively. The displacement and age constraints for the fan yield a slip rate of 1.8 +0.8/-0.8 mm/yr to 2.4 +1.2/-1.1 mm/yr (2σ) along the northern Warm Springs Valley fault system for the past 41.4–55.7 ka. In contrast to this longer‐term slip rate, shorelines associated with the Sehoo highstand of Lake Lahontan (~15.8 ka) adjacent to the Fort Sage fan are dextrally faulted at most 3 m, which limits a maximum post‐15.8 ka slip rate to 0.2 mm/yr. These relations indicate that the post‐Lahontan slip rate on the fault is only about one‐tenth the longer‐term (41–56 ka) average slip rate. This apparent slip‐rate variation may be related to co‐dependent interaction with the nearby Honey Lake fault system, which shows evidence of an accelerated period of mid‐Holocene earthquakes.

California, Nevada↗

USGS2019

An investigation of seismicity induced by hydraulic fracturing in the Sichuan basin of China based on data from a temporary seismic network

Hydraulic fracturing has been inferred to trigger the majority of injection‐induced seismicity in the Zhaotong and Changning shale gas field, Sichuan basin of China, in contrast to the Midwestern United States, where massive wastewater disposal has been the dominant triggering mechanism. More than 15,000 earthquakes, with magnitudes ranging up to M w 4.7, were recorded by a temporary network in the Sichuan basin for three years, with a completeness magnitude of M L 1.1. A catalog of earthquakes relocated with code tomoDD, combined with comprehensive injection data during an eight day period, shows that the earthquakes were highly correlated spatiotemporally with hydraulic fracturing activities mostly from a single well pad. Three M L ≥4.0 events occurred during hydraulic fracturing operations from 12 to 19 January 2017, followed by the fourth and largest event, with moment magnitude (⁠M w⁠ ) 4.7, on 28 January. The hypocenters of the four largest events were located in dolomite of Cambrian age, between a shale gas reservoir and the top of the crystalline basement rocks. This was found to be similar to 60% of the smaller earthquakes in this cluster, at depths from 2.5 to 4.0 km.

Sichuan basin↗

USGS2001

Implications for eruptive processes as indicated by sulfur dioxide emissions from Kilauea Volcano, Hawai'i, 1979-1997

Kı̄lauea Volcano, Hawai‘i, currently hosts the longest running SO 2 emission-rate data set on the planet, starting with initial surveys done in 1975 by Stoiber and his colleagues. The 17.5-year record of summit emissions, starting in 1979, shows the effects of summit and east rift eruptive processes, which define seven distinctly different periods of SO 2 release. Summit emissions jumped nearly 40% with the onset (3 January 1983) of the Pu`u `Ō`ō-Kūpaianaha eruption on the east rift zone (ERZ). Summit SO 2 emissions from Kı̄lauea showed a strong positive correlation with short-period, shallow, caldera events, rather than with long-period seismicity as in more silicious systems. This correlation suggests a maturation process in the summit magma-transport system from 1986 through 1993. During a steady-state throughput-equilibrium interval of the summit magma reservoir, integration of summit-caldera and ERZ SO 2 emissions reveals an undegassed volume rate of effusion of 2.1×10 5 m 3 /d. This value corroborates the volume-rate determined by geophysical methods, demonstrating that, for Kı̄lauea, SO 2 emission rates can be used to monitor effusion rate, supporting and supplementing other, more established geophysical methods. For the 17.5 years of continuous emission rate records at Kı̄lauea, the volcano has released 9.7×10 6 t (metric tonnes) of SO 2 , 1.7×10 6 t from the summit and 8.0×10 6 t from the east rift zone. On an annual basis, the average SO 2 release from Kı̄lauea is 4.6×10 5 t/y, compared to the global annual volcanic emission rate of 1.2×10 7 t/y.

Journal of Volcanology and Geothermal Research↗

USGS2003

Seismic response analysis of an instrumented building structure

The Sheraton - Universal hotel, an instrumented building lying in North Hollywood, USA is selected for case study in this paper. The finite element method is used to produce a linear time - invariant structural model, and the SAP2000 program is employed for the time history analysis of the instrumented structure under the base excitation of strong motions recorded in the basement during the Northridge, California earthquake of 17 January 1994. The calculated structural responses are compared with the recorded data in both time domain and frequency domain, and the effects of structural parameters evaluation and indeterminate factors are discussed. Some features of structural response, such as the reason why the peak responses of acceleration in the ninth floor are larger than those in the sixteenth floor, are also explained.

Earthquake Engineering and Engineering Vibration↗