SEARCH · Search USGS

Results for “Acoustics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

USGS1977

Submarine seepage of natural gas in Norton Sound, Alaska

Unusual concentrations of dissolved two- to four-carbon alkanes were observed in the waters in Norton Sound in a localized area approximately 40 kilometers south of Nome, Alaska, in 1976. The hydrocarbons were identified in the near-bottom waters downcurrent for more than 100 kilometers from a sea-floor point source. Preliminary dynamic modeling estimates of the initial gas phase composition predict methane/ethane and ethane/propane ratios of 24 and 1.7, respectively, assuming the hydrocarbons were introduced by bubbles. The low ethane/propane ratio is indicative of gas from a liquid petroleum source rather than from nonassociated or biogenic natural gas. Preliminary data on the structural geology of Norton Basin lend support to the interpretation based on the hydrocarbon plume. Unconformably truncated strata dip basinward from the seep locus; acoustic anomalies and numerous steeply dipping faults in the immediate vicinity of the seep are corroborating evidence that shallow gas- or petroleum-charged sediments and strata coincide with avenues for migration of mobile hydrocarbons to the sea floor. These factors, taken in concert with the sedimentological regime, the recent revision (increase) of basin depth estimates, and the highly localized hydrocarbon source, strongly suggest a thermogenic rather than a recent biogenic origin for these gaseous compounds.

Alaska↗

USGS1997

Burst conditions of explosive volcanic eruptions recorded on microbarographs

Explosive volcanic eruptions generate pressure disturbances in the atmosphere that propagate away either as acoustic or as shock waves, depending on the explosivity of the eruption. Both types of waves are recorded on microbarographs as 1- to 0.1-hertz N-shaped signals followed by a longer period coda. These waveforms can be used to estimate burst pressures end gas concentrations in explosive volcanic eruptions and provide estimates of eruption magnitudes.

Science↗

USGS2012

Repeat surveys of spawning cisco (Coregonus artedi) in western Lake Superior: Timing, distribution and composition of spawning stocks

Acoustic (AC) and midwater trawl (MT) surveys of spawning cisco ( Coregonus artedi ) in Lake Superior have been combined with commercial yield to estimate exploitation. To time surveys properly, it is important to understand when adults typically arrive at spawning grounds and how numbers change as the spawning season progresses. We conducted repeat autumn surveys during nighttime hours at coastal sites where commercial roe fisheries occur. Spawner densities increased significantly from October to mid-November, but differences measured at sites sampled from mid- to late-November were comparatively small. Spawners occupied the upper 20–30 m of the water column during mid-November before utilizing a wider range of depths by late-November. We compared repeat AC densities to temporal trends of catch-per-unit-effort (CPUE) in suspended commercial gillnets and found good agreement within sites. Because different gillnet mesh sizes were used in each roe fishery. CPUE and AC density were poorly correlated among sites. We recommend that future surveys be conducted between mid- and late-November, and that MT gear be used to measure cisco densities in the uppermost 10 m of the water column where AC estimates may be conservative. Given the short temporal window for assessing spawner density, we believe both AC-MT and gillnet surveys will be needed to ensure that harvest of different stocks is kept at a sustainable level.

Lake Superior↗

USGS1958

Recent underwater surveys using low-frequency sound to locate shallow bedrock

Underwater investigations at Lake Mead, Chicago, Passamaquoddy Bay, and on Long Island established the characteristics of sound waves that can be used in shallow geophysical exploration by the sonar method. At Lake Mead the sediments were for the most part clay of high water content which was easily penetrated by low-power sound at a frequency of 14.2 kilocycles. The greatest depth of penetration was 140 feet. Sound having frequencies of 50 and 80 kilocycles did not penetrate. At Chicago, sound at a frequecy of 11 kilocycles and an output power of 800 watts gave a satisfactory delineation of bedrock beneath Lake Michigan. The maximum distance to bedrock was about 135 feet. At Passamaquoddy Bay a sound frequency of 6 kilocycles and about 700 watts of output power gave much better delineation of bedrock. A frequency of 6 kilocycles at the lower output power was much better than 11 kilocycles at higher power. About 250 feet of penetration was attained. Pulsed power was used in each of these investigations. The pulse lengths were long—about 14–25 milliseconds. Bedrock was mapped at Lake Mead, Chicago, and Passamaquoddy Bay. The methods of ordinary hydrographic surveying were used for horizontal and vertical positioning. For horizontal positions the ordinary three-point sextant-fix method was used. For vertical positioning, recording gages suitably placed and supplemented by staff gages were used. All data were tied into the third-order control net of the U. S. Coast and Geodetic Survey. In connection with a study for a proposed Midwestern waterway, the technical problem was reviewed and the techniques considerably improved. New equipment was built and evaluated on Long Island Sound. It operated with pulsed power at a frequency of 6 kilocycles, and pulse length was controlled and variable from 1 to 9 milliseconds. Output acoustic power was about 2500 watts. With the transducer in ordinary operating positions as much as 400 feet of sediment was penetrated. With the transducer placed directly on the bottom of the water in Huntington Bay about 750 feet of penetration was attained. Several innovations in sonar techniques, which are desirable for sediment exploration, and which give much more detailed information than the earlier equipment are described. The techniques required for stratigraphic interpretation of the sound records are described briefly. A method for the determination of sound velocities is discussed. Multiple echoes and other effects complicate the interpretation of records and are explained. The problems of geological control encountered also are mentioned.

Illinois, Maine, Nevada, New Brunswick, New York↗

USGS1970

Sea-floor spreading at the junction between Gorda Rise and Mendocino Ridge

A Quaternary deformation pattern revealed by new sub-bottom acoustic profiles supplements previous knowledge derived chiefly from magnetic and seismic evidence on the contemporary tectonics off northern California. An inferred age for the sedimentary cover along the axis of the southern part of Gorda Rise suggests that no volcanism has occurred along that part of the rise for more than 100,000 years. Sea-floor spreading at the rise crest has been accommodated by sinking of a keystone block that forms the floor of Escanaba Trough, the median valley of the rise. Differential movement between Pacific and American tectonic plates could have caused the deformation pattern, and during this movement, the displacement offshore beyond the northwest end of the San Andreas fault is inferred to have divided at Cape Mendocino between a fault along Mendocino Ridge and a fault segment that connects with the Blanco fault farther northwest.

California↗

USGS1973

Structure and development of the continental margin of British Honduras

The continental margin of British Honduras is characterized by elongate ridges that are sub-parallel with the coast and that diverge slightly northward. Each ridge apparently is formed by aligned fault blocks composed of continental basement rock that rotated and subsided during rifting of the margin. The western part of the Cayman Ridge may be underlain by similar rock that extends southwestward into the margin. Little sediment has been trapped in the basins between the ridges, presumably as a result of long-term, low rates of sedimentation. A canyon system that is controlled by both fault-block ridges and cross faults transects the margin and opens into the Yucatan Basin. Deep-sea sediments are characterized by a succession of pelagic deposits above acoustic basement rocks; these deposits are covered by turbidites that have formed deep-sea fan deposits in some places. The change from pelagic to turbidite deposition may have occurred at the end of Cretaceous time when regional uplift provided a source for clastic materials. The principal channel for transport of sediment to the deep sea is believed to be a graben that extends northeastward from the southwest corner of the Gulf of Honduras. Development of the margin may have begun in Late Jurassic time when sphenochasmic rifting created the ancestral Gulf of Honduras. Near the end of Cretaceous time, a new set of motions began, with the Caribbean plate moving relatively eastward and slightly away from the North American plate. This new motion resulted in continued movement of basement blocks through Tertiary and Quaternary time. Although this margin is not young, it has a geomorphically youthful aspect in that the sedimentary sequences do not obscure the rift structures.

British Honduras, Caribbean Sea, Gulf of Honduras↗

USGS1973

Shallow structure and geologic development of the Southern Red Sea

A series of 34 shallow-penetration seismic-reflection profiles made across the Red Sea show that it developed in two main stages. Initially, an early or pre-Miocene uplift and lateral extension resulted in crustal thinning and eventual formation of the main Red Sea Basin. During Miocene time, the Red Sea was isolated from the Indian Ocean but possibly connected with the Mediterranean Sea, which, like the Red Sea, was an evaporite basin at that time. A distinct acoustic reflector (reflector S) in the Red Sea marks the top of the Miocene evaporite sequence and is correlative with reflector M in the Mediterranean, which is similarly identified with termination of evaporite conditions. In Pliocene time, connection with the Indian Ocean was re-established, the opening to the Mediterranean was closed, and normal marine conditions were resumed in the Red Sea. Sea-floor spreading first started in Pliocene-Pleistocene time, and resulted in the formation of the axial zone of the Red Sea.

GSA Bulletin↗

USGS1977

Compositional variations of young basalts in the Mid-Atlantic Ridge rift valley near lat 36°49′N

Fifty acoustically positioned samples of fresh basalt were collected by the submersible Alvin from the median valley of the Mid-Atlantic Ridge during the French American Mid-Ocean Undersea Study (FAMOUS) in the summer of 1974. The samples show regular compositional variations from the center of the rift valley (central lava flows) out to the rift valley walls (flank lava flows). The central lava samples show higher ratios of olivine relative to clinopyroxene and plagioclase phenocrysts and contain chrome spinel. Glasses of the flank lava samples are enriched in SiO 2 , TiO 2 , K 2 O, H 2 O, and FeO/MgO relative to central lava samples. Studies of the thickness of palagonite and manganese crusts indicate that the flank lava flows are considerably younger than the inferred spreading age of the crust on which they occur. Flank lavas are generally older than central lavas, but notable exceptions occur. The composition of the flank lava glass can be derived by the removal of approximately 29 wt percent of analyzed phenocrysts (in the ratio 5.7 plagioclase, 2.5 olivine, 1.8 clinopyroxene) from the central lava glass. In addition, other processes (possibly involving volatile transfer) must enrich the flank lavas in K 2 O, TiO 2 , and H 2 O. A model is proposed whereby this crystal fractionation occurs in a shallow, narrow (6-km-wide) magma chamber underlying the median valley. The chamber is compositionally zoned, and central lavas are fed from dikes tapping its hotter axial zone, whereas flank lavas are fed from the cooler, differentiated melt on the margins. The nature of the chemical variations in the lavas permits an estimate of the composition and thickness of the cumulates forming at the base of the chamber.

GSA Bulletin↗

USGS1999

Window into the Caledonian orogen: Structure of the crust beneath the East Shetland platform, United Kingdom

Reprocessing and interpretation of commercial and deep seismic reflection data across the East Shetland platform and its North Sea margin provide a new view of crustal subbasement structure beneath a poorly known region of the British Caledonian orogen. The East Shetland platform, east of the Great Glen strike-slip fault system, is one of the few areas of the offshore British Caledonides that remained relatively insulated from the Mesozoic and later rifting that involved much of the area around the British Isles, thus providing an “acoustic window” into the deep structure of the orogen. Interpretation of the reflection data suggests that the crust beneath the platform retains a significant amount of its original Caledonian and older architecture. The upper to middle crust is typically poorly reflective except for individual prominent dipping reflectors with complex orientations that decrease in dip with depth and merge with a lower crustal layer of high reflectivity. The three-dimensional structural orientation of the reflectors beneath the East Shetland platform is at variance with Caledonian reflector trends observed elsewhere in the Caledonian orogen (e.g., north of the Scottish mainland), emphasizing the unique tectonic character of this part of the orogen. Upper to middle crustal reflectors are interpreted as Caledonian or older thrust surfaces that were possibly reactivated by Devonian extension associated with post-Caledonian orogenic collapse.

Geological Society of America Bulletin↗

USGS2002

Morphology, volcanism, and mass wasting in Crater Lake, Oregon

Crater Lake was surveyed nearly to its shoreline by high-resolution multibeam echo sounding in order to define its geologic history and provide an accurate base map for research and monitoring surveys. The bathymetry and acoustic backscatter reveal the character of landforms and lead to a chronology for the concurrent filling of the lake and volcanism within the ca. 7700 calibrated yr B.P. caldera. The andesitic Wizard Island and central-plattform volcanoes are composed of sequences of lava deltas that record former lake levels and demonstrate simultaneous activity at the two vents. Wizard Island eruptions ceased when the lake was ~80 m lower than at present. Lava streams from prominent channels on the surface of the central platform descended to feed extensive subaqueous flow fields on the caldera floor. The Wizard Island and central-platform volcanoes, andesitic Merriam Cone, and a newly discovered probable lava flow on the eastern floor of the lake apparently date from within a few hundred years of caldera collapse, whereas a small rhydacite dome was emplaced on the flank of Wizard Island at ca. 4800 cal. yr B.P. Bedrock outcrops on the submerged caldera walls are shown in detail and, in some cases, can be correlated with exposed geologic units of Mount Mazama. Fragmental debris making up the walls elsewhere consists of narrow talus cones forming a dendritic pattern that leads to fewer, wider ridges downslope. Hummocky topography and scattered blocks up to ~280 m long below many of the embayments in the caldera wall mark debris-avalanche deposits that probably formed in single events and commonly are affected by secondary failures. The flat-floored, deep basins contain relatively fine-grained sediment transported from the debris aprons by sheet-flow turbidity currents. Crater Lake apparently filled rapidly (ca. 400-750 yr) until reaching a permeable layer above glaciated lava identified by the new survey in the northeast caldera wall at ~1845 m elevation. Thereafter, a gradual, climatically modulated rise in lake level to the present 1883 m produced a series of beaches culminating in a modern wave-cut platform, commonly ~40 m wide, where suitable material is present. The new survey reveals landforms that result from intermediate-composition volcanism in rising water, delineates mass wasting and sediment transport into a restricted basin, and yields a more accurate postcaldera history leading to improved assessment of volcanic hazards.

Oregon↗

USGS2008

Timing and patterns of basin infilling as documented in Lake Powell during a drought

Between 1999 and 2005, drought in the western United States led to a >44 m fall in the level of Lake Powell (Arizona-Utah), the nation's second-largest reservoir. River discharges to the reservoir were halved, yet the rivers still incised the tops of deltas left exposed along the rim of the reservoir by the lake-level fall. Erosion of the deltas enriched the rivers in sediment such that upon entering the reservoir they discharged plunging subaqueous gravity flows, one of which was imaged acoustically. Repeat bathymetric surveys of the reservoir show that the gravity flows overtopped rockfalls and formed small subaqueous fans, locally raising sediment accumulation rates 10–100-fold. The timing of deep-basin deposition differed regionally across the reservoir with respect to lake-level change. Total mass of sediment transferred from the lake perimeter to its bottom equates to ~22 yr of river input.

Arizona, Utah↗

USGS2016

Pre-Mississippian tectonic affinity across the Canada Basin–Arctic margins of Alaska and Canada

New and reprocessed seismic reflection data on the Alaskan and Canadian Arctic margins of the Canada Basin, together with geologic constraints from exploration wells and outcrops, reveal structural and stratigraphic relationships in pre-Mississippian rocks that constrain models of Canada Basin opening. Lithostratigraphic age and acoustic character indicate that the Devonian and older passive-margin to foreland-basin succession in the Canadian M’Clure Strait is also found on the central Alaska margin. This succession also displays similar structural geometry and relief as well as deformational age on both margins. Moreover, Middle Devonian to Early Mississippian tectonic vergence—north directed on the central Alaska margin and east directed in the Canadian M’Clure Strait—indicates a common direction of tectonic transport if the two margins were conjugate. All of these observations demonstrate that pre-Mississippian rocks of the Alaskan and Canadian Arctic margins share a common tectonic history of uplift and exhumation and that the two margins were conjugates prior to opening of the Canada Basin.

Alaska↗

USGS2011

Measuring currents in submarine canyons: technological and scientific progress in the past 30 years

The development and application of acoustic and optical technologies and of accurate positioning systems in the past 30 years have opened new frontiers in the submarine canyon research communities. This paper reviews several key advancements in both technology and science in the field of currents in submarine canyons since the1979 publication of Currents in Submarine Canyons and Other Sea Valleys by Francis Shepard and colleagues. Precise placements of high-resolution, high-frequency instruments have not only allowed researchers to collect new data that are essential for advancing and generalizing theories governing the canyon currents, but have also revealed new natural phenomena that challenge the understandings of the theorists and experimenters in their predictions of submarine canyon flow fields. Baroclinic motions at tidal frequencies, found to be intensified both up canyon and toward the canyon floor, dominate the flow field and control the sediment transport processes in submarine canyons. Turbidity currents are found to frequently occur in active submarine canyons such as Monterey Canyon. These turbidity currents have maximum speeds of nearly 200 cm/s, much smaller than the speeds of turbidity currents in geological time, but still very destructive. In addition to traditional Eulerian measurements, Lagrangian flow data are essential in quantifying water and sediment transport in submarine canyons. A concerted experiment with multiple monitoring stations along the canyon axis and on nearby shelves is required to characterize the storm-trigger mechanism for turbidity currents.

Geosphere↗

USGS2020

Focused fluid flow and methane venting along the Queen Charlotte fault, offshore Alaska (USA) and British Columbia (Canada)

Fluid seepage along obliquely deforming plate boundaries can be an important indicator of crustal permeability and influence on fault-zone mechanics and hydrocarbon migration. The ~850-km-long Queen Charlotte fault (QCF) is the dominant structure along the right-lateral transform boundary that separates the Pacific and North American tectonic plates offshore southeastern Alaska (USA) and western British Columbia (Canada). Indications for fluid seepage along the QCF margin include gas bubbles originating from the seafloor and imaged in the water column, chemosynthetic communities, precipitates of authigenic carbonates, mud volcanoes, and changes in the acoustic character of seismic reflection data. Cold seeps sampled in this study preferentially occur along the crests of ridgelines associated with uplift and folding and between submarine canyons that incise the continental slope strata. With carbonate stable carbon isotope (δ 13 C) values ranging from −46‰ to −3‰, there is evidence of both microbial and thermal degradation of organic matter of continental-margin sediments along the QCF. Both active and dormant venting on ridge crests indicate that the development of anticlines is a key feature along the QCF that facilitates both trapping and focused fluid flow. Geochemical analyses of methane-derived authigenic carbonates are evidence of fluid seepage along the QCF since the Last Glacial Maximum. These cold seeps sustain vibrant chemosynthetic communities such as clams and bacterial mats, providing further evidence of venting of reduced chemical fluids such as methane and sulfide along the QCF.

Alaska, British Columbia↗

USGS1981

Estimation of depth to magnetic source using maximum entropy power spectra, with application to the Peru-Chile Trench

Estimations of the depth to magnetic sources using the power spectrum of magnetic anomalies generally require long magnetic profiles. The method developed here uses the maximum entropy power spectrum (MEPS) to calculate depth to source on short windows of magnetic data; resolution is thereby improved. The method operates by dividing a profile into overlapping windows, calculating a maximum entropy power spectrum for each window, linearizing the spectra, and calculating with least squares the various depth estimates. The assumptions of the method are that the source is two dimensional and that the intensity of magnetization includes random noise; knowledge of the direction of magnetization is not required. The method is applied to synthetic data and to observed marine anomalies over the Peru-Chile Trench. The analyses indicate a continuous magnetic basement extending from the eastern margin of the Nazca plate and into the subduction zone. The computed basement depths agree with acoustic basement seaward of the trench axis, but deepen as the plate approaches the inner trench wall. This apparent increase in the computed depths may result from the deterioration of magnetization in the upper part of the ocean crust, possibly caused by compressional disruption of the basaltic layer. Landward of the trench axis, the depth estimates indicate possible thrusting of the oceanic material into the lower slope of the continental margin.

Memoir of the Geological Society of America↗

USGS2013

Evaluating analytical approaches for estimating pelagic fish biomass using simulated fish communities

Pelagic fish assessments often combine large amounts of acoustic-based fish density data and limited midwater trawl information to estimate species-specific biomass density. We compared the accuracy of five apportionment methods for estimating pelagic fish biomass density using simulated communities with known fish numbers that mimic Lakes Superior, Michigan, and Ontario, representing a range of fish community complexities. Across all apportionment methods, the error in the estimated biomass generally declined with increasing effort, but methods that accounted for community composition changes with water column depth performed best. Correlations between trawl catch and the true species composition were highest when more fish were caught, highlighting the benefits of targeted trawling in locations of high fish density. Pelagic fish surveys should incorporate geographic and water column depth stratification in the survey design, use apportionment methods that account for species-specific depth differences, target midwater trawling effort in areas of high fish density, and include at least 15 midwater trawls. With relatively basic biological information, simulations of fish communities and sampling programs can optimize effort allocation and reduce error in biomass estimates.

Canadian Journal of Fisheries and Aquatic Sciences↗

USGS2014

Estimating reach-specific fish movement probabilities in rivers with a Bayesian state-space model: application to sea lamprey passage and capture at dams

Improved methods are needed to evaluate barriers and traps for control and assessment of invasive sea lamprey ( Petromyzon marinus ) in the Great Lakes. A Bayesian state-space model provided reach-specific probabilities of movement, including trap capture and dam passage, for 148 acoustic tagged invasive sea lamprey in the lower Cheboygan River, Michigan, a tributary to Lake Huron. Reach-specific movement probabilities were combined to obtain estimates of spatial distribution and abundance needed to evaluate a barrier and trap complex for sea lamprey control and assessment. Of an estimated 21 828 – 29 300 adult sea lampreys in the river, 0%–2%, or 0–514 untagged lampreys, could have passed upstream of the dam, and 46%–61% were caught in the trap. Although no tagged lampreys passed above the dam (0/148), our sample size was not sufficient to consider the lock and dam a complete barrier to sea lamprey. Results also showed that existing traps are in good locations because 83%–96% of the population was vulnerable to existing traps. However, only 52%–69% of lampreys vulnerable to traps were caught, suggesting that traps can be improved. The approach used in this study was a novel use of Bayesian state-space models that may have broader applications, including evaluation of barriers for other invasive species (e.g., Asian carp ( Hypophthalmichthys spp.)) and fish passage structures for other diadromous fishes.

Canadian Journal of Fisheries and Aquatic Sciences↗

USGS2015

Initiation of migration and movement rates of Atlantic salmon smolts in fresh water

Timing of ocean entry is critical for marine survival of both hatchery and wild Atlantic salmon ( Salmo salar ) smolts. Management practices and barriers to migration such as dams may constrain timing of smolt migrations resulting in suboptimal performance at saltwater entry. We modeled influences of stocking location, smolt development, and environmental conditions on ( i ) initiation of migration by hatchery-reared smolts and ( ii ) movement rate of hatchery- and wild-reared Atlantic salmon smolts in the Penobscot River, Maine, USA, from 2005 through 2014 using acoustic telemetry data. We also compared movement rates in free-flowing reaches with rates in reaches with hydropower dams and head ponds. We compared movement rates before and after (1) removal of two mainstem dams and (2) construction of new powerhouses. Initiation of movement by hatchery fish was influenced by smolt development, stocking location, and environmental conditions. Smolts with the greatest gill Na + , K + -ATPase (NKA) activity initiated migration 24 h sooner than fish with the lowest gill NKA activity. Fish with the greatest cumulative thermal experience initiated migration 5 days earlier than those with lowest cumulative thermal experience. Smolts released furthest from the ocean initiated migration earlier than those released downstream, but movement rate increased by fivefold closer to the ocean, indicating behavioral trade-offs between initiation and movement rate. Dams had a strong effect on movement rate. Movement rate increased from 2.8 to 5.4 km·h −1 in reaches where dams were removed, but decreased from 2.1 to 0.1 km·h −1 in reaches where new powerhouses were constructed. Movement rate varied throughout the migratory period and was inversely related to temperature. Fish moved slower at extreme high or low discharge. Responses in fish movement rates to dam removal indicate the potential scope of recovery for these activities.

Maine↗