Search USGS⌕ Search

SEARCH · Search USGS

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources

Groundwater availability of the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho

The Columbia Plateau Regional Aquifer System (CPRAS) covers about 44,000 square miles of southeastern Washington, northeastern Oregon, and western Idaho. The area supports a $6-billion per year agricultural industry, leading the Nation in production of apples, hops, and eight other commodities. Groundwater pumpage and surface-water diversions supply water to croplands that account for about 5 percent of the Nation’s irrigated lands. Groundwater also is the primary source of drinking water for the more than 1.3 million people in the study area. Increasing competitive demands for water for municipal, fisheries/ecosystems, agricultural, domestic, hydropower, and recreational uses must be met by additional groundwater withdrawals and (or) by changes in the way water resources are allocated and used throughout the hydrologic system. As of 2014, most surface-water resources in the study area were either over allocated or fully appropriated, especially during the dry summer season. In response to continued competition for water, numerous water-management activities and concerns have gained prominence: water conservation, conjunctive use, artificial recharge, hydrologic implications of land-use change, pumpage effects on streamflow, and effects of climate variability and change. An integrated understanding of the hydrologic system is important in order to implement effective water-resource management strategies that address these concerns. To provide information to stakeholders involved in water-management activities, the U.S. Geological Survey (USGS) Groundwater Resources Program assessed the groundwater availability as part of a national study of regional systems (U.S. Geological Survey, 2008). The CPRAS assessment includes: The present status of groundwater resources, How these resources have changed over time, and Development and application of tools to estimate system responses to stresses from future uses and climate variability and change. This effort builds on previous investigations, especially the USGS Columbia Plateau Regional Aquifer-System Analysis study (CP-RASA). A major product of this new assessment is a numerical groundwater-flow model of the system. The model was used to estimate water-budget components of the hydrogeologic units composing the groundwater system, and to evaluate groundwater availability under existing land- and water-use conditions and a possible future climate scenario representing an increase in pumpage demand due to a warming climate. Information from this study also allowed for analysis of: The CPRAS for predevelopment times (pre-1920), Variations from 1920 through 2007, Conditions during 1985–2007 (referred to as “existing conditions”), and Changes in the system from predevelopment times. The model also is a useful tool for investigating water supply, water demand, management strategies, groundwater-surface water exchanges, and potential effects of changing climate on the hydrologic system.

Idaho, Oregon, Washington↗

Low-cost computer classification of land cover in the Portland area, Oregon, by signature extension techniques

Computer-aided techniques for interpreting multispectral data acquired by Landsat offer economies in the mapping of land cover. Even so, the actual establishment of the statistical classes, or "signatures," is one of the relatively more costly operations involved. Analysts have, therefore, been seeking cost-saving signature extension techniques that would accept training data acquired at one time or place and apply them to another. Signatures may be extended in preprocessing steps or in the classification steps that follow. In the present example, land cover classes were derived by the simplest and most direct form of signature extension: Classes statistically derived from a Landsat scene of the Puget Sound area, Wash., were applied to the adjacent Landsat scene of the Portland area, Oreg., acquired during the next 25 seconds down orbit. Many features can be recognized on the reduced-scale version of the Portland land cover map shown in this report although no statistical assessment of its accuracy is available.

Oregon, Washington↗

Evolution of volcanic and tectonic features in caldera settings and their importance in the localization of ore deposits

Many calderas are located along regionally important fault zones that are intermittently active before and after the caldera cycle. In mineralized calderas, the ore deposits are controlled by structures developed during caldera formation and by regional faults which intersect and reactivate the caldera-related structures. In the earliest phase of the caldera cycle, tumescence occurs over the shallowly emplaced magma chamber and normal faults develop within the structural dome above the magma chamber. This early phase of faulting is disrupted by caldera formation but some of the faults are preserved outside the caldera margin and may become important ore-controlling structures such as the Ruja mercury deposit in the McDermitt caldera complex, Nevada, and the precious metal deposits in the Atlanta district, Nevada, outside the Indian Peak caldera. Caldera-related structures such as ring fracture faults are commonly the most important in controlling the emplacement of resurgent magma, as well as postcollapse intrusions and associated ore deposits. During the resurgence phase of the caldera, faults related to an apical graben, and radial and ring faults and fractures form and may extend outside the collapse structure. Radial and ring faults and fractures provided the structural control for gold alunite-type deposits in the Rodalquilar caldera complex, Spain.At the end of the caldera cycle, the area over the batholith related to the caldera-forming magma chambers is uplifted as isostatic compensation occurs, or subsides if the volcanic field is developed within a rapidly subsiding graben. Volume change resulting from crystallization will also contribute to subsidence. Regional subsidence of the Lake Owyhee volcanic field in southeastern Oregon at the end of the caldera cycle is reflected by arkosic sedimentation in the caldera basins and throughout the eastern part of the volcanic field. Crystallization of the underlying batholith permits the reestablishment of brittle deformation along the regional faults which initially may have controlled magma emplacement. This tectonic activity may reactivate caldera structures and these typically become important for localization of hydrothermal activity. Hot spring-type gold deposits in the Lake Owyhee volcanic field formed when a regional northwest-trending structure reactivated the caldera ring fracture fault zone of the Three Fingers caldera. The formation of hydrothermal ore deposits at the end of the caldera cycle is often related to tectonic reactivation of caldera structures by regional faults and emplacement of small volumes of magma as stocks and vent complexes along these structures.

Economic Geology↗

Pleistocene to Holocene contrasts in organic matter production and preservation on the California continental margin

Organic matter in sediments from cores collected from the upper continental slope (200–2700 m) off California and southern Oregon shows marked differences in concentration and marine character between the last glacial interval (ca. 24–10 ka) and either Holocene time or last interstadial (oxygen isotope stage 3, ca. 60–24 ka). In general, sediments deposited during Holocene time and stage 3 contain higher amounts of marine organic matter than those deposited during the last glacial interval, and this contrast is greatest in cores collected off southern California. The most profound differences in stage 3 sediments are between predominantly bioturbated sediments and occasional interbeds of laminated sediments. The sediments are from cores collected within the present oxygen minimum zone on the upper continental slope from as far north as the Oregon-California border to as far south as Point Conception. These upper Pleistocene laminated sediments contain more abundant hydrogen-rich (type II) marine algal organic matter than even surface sediments that have large amounts of nonrefractory organic matter. The stable carbon-isotopic composition of the organic matter does not change with time between bioturbated and laminated sediments, indicating that the greater abundance of type II organic matter in the laminated sediments is not due to a change in source but rather represents a greater degree of production and preservation of marine organic matter. The presence of abundant, well-preserved organic matter supports the theory that the oxygen minimum zone in the northeastern Pacific Ocean was more intense, and possibly anoxic, during late Pleistocene time as a result of increased coastal upwelling that enhanced algal productivity.

California↗

Using the precipitation-runoff modeling system to predict seasonal water availability in the upper Klamath River basin, Oregon and California

Accurate forecasts of the streamflow expected during late spring and summer in the Upper Klamath River Basin in southern-central Oregon and northern California are used by water management agencies to balance water allocations for agriculture, aquatic habitat, and hydropower-production needs. Streamflow forecasts are also used by irrigation farmers for planning. The forecasts are typically made twice a month starting as early in the water year as December. Multiple regression equations relating real-time snowpack and precipitation conditions to seasonal streamflow volumes have been used for many years in forecasting. However, with warming temperature trends and lower snowpack, such forecasts based on historical data could become less reliable in the future. If the timing and relation of snowpack and precipitation are outside of the range of the historical data used to create the equations, the forecasts become extrapolations. Statistical forecast equations are also limited in their ability to forecast streamflow in groundwater-dominated basins having inter-annual lag. As an additional method for seasonal streamflow forecasting, a physical-process-based hydrologic model employing the Precipitation-Runoff Modeling System (PRMS) was developed in cooperation with the U.S. Bureau of Reclamation for the Upper Klamath Basin in this study. The model was calibrated for the portion of the basin draining into Upper Klamath Lake. PRMS is a deterministic, distributed-parameter, physical-process-based modeling system developed by the U.S. Geological Survey. It simulates daily streamflow, snow, solar radiation, evapotranspiration, surface-water, and groundwater processes within the basin. A model calibration and validation period for water years 2000–15 and water years 1984–99, respectively, was used. The model was calibrated and validated using measured streamflow, snowpack, evapotranspiration, and solar radiation data sets. Interpolated daily precipitation and air temperature data from 32 meteorological stations within and surrounding the Upper Klamath Basin were used as model input. Performance statistics, used to evaluate how well simulated daily streamflow matched with measured streamflow included percent bias, percent relative error, and root-mean-square error. The statistics were computed annually, monthly, for October–March, and for April–September. With the exception of the October–March period, percent bias statistics were all within plus or minus 5-percent for both the calibration and validation periods. Limitations to using the model are error in the precipitation and air temperature input time series data, which include measurement error and error in the spatial interpolation method. Other errors include measured daily streamflow data, which were adjusted for consumptive use losses to make them more closely resemble natural streamflow for calibration. The model developed for the Upper Klamath Basin can be used to forecast streamflow from the Sprague and Williamson River Basins and inflow to Upper Klamath Lake. Reliable forecasts at these locations are needed for managing water for irrigation, ecosystem health, and power production. Using the models in a forecast application requires assembling model input data sets of anticipated daily precipitation and minimum and maximum air temperature for the period after the date the forecast is made and the end of the forecasted period. These climate data sets can be based on historical or synthetic records, at the discretion of the forecaster. With the Ensemble Streamflow Prediction method, a suite of streamflow scenarios is simulated using multiple years of climate data as model input. The forecasted streamflow is determined from knowing the exceedance probabilities of the simulated streamflows. In this study, the model and the Ensemble Streamflow Prediction method were used to forecast the volume of inflow to Upper Klamath Lake for a 6-month period from April 1, 2015, to September 30, 2015, using a range of climate data sets based on El Niño Southern Oscillation (ENSO) criteria. Because 2015 was a warm phase ENSO period, climate data for 10 warm phase ENSO years from 1980 to 2010 were used as input to the model. The simulated April–September 2015 UKL inflow volume based on measured 2015 climate data was 482,000 acre-feet, which was very close to the 50th percent exceedance probability computed from 10 simulated scenarios that used warm phase ENSO climate input data from 1980–2010.

California, Oregon↗

Postglacial faulting near Crater Lake, Oregon, and its possible association with the Mazama caldera-forming eruption

Volcanoes of subduction-related magmatic arcs occur in a variety of crustal tectonic regimes, including where active faults indicate arc-normal extension. The Cascades arc volcano Mount Mazama overlaps on its west an ∼10-km-wide zone of ∼north-south–trending normal faults. A lidar (light detection and ranging) survey of Crater Lake National Park, reveals several previously unrecognized faults west of the caldera. Postglacial vertical separations measured from profiles across scarps range from ∼2 m to as much as 12 m. Scarp profiles commonly suggest two or more postglacial surface-rupturing events. Ignimbrite of the ca. 7.6 ka climactic eruption of Mount Mazama, during which Crater Lake caldera formed, appears to bury fault strands where they project into thick, valley-filling ignimbrite. Lack of lateral offset of linear features suggests principally normal displacement, although predominant left stepping of scarp strands implies a component of dextral slip. West-northwest–east-southeast and north-northwest–south-southeast linear topographic elements, such as low scarps or ridges, shallow troughs, and straight reaches of streams, suggest that erosion was influenced by distributed shear, consistent with GPS vectors and clockwise rotation of the Oregon forearc block. Surface rupture lengths (SRL) of faults suggest earthquakes of (moment magnitude) M w 6.5 from empirical scaling relationships. If several faults slipped in one event, a combined SRL of 44 km suggests an earthquake of M w 7.0. Postglacial scarps as high as 12 m imply maximum vertical slip rates of 1.5 mm/yr for the zone west of Crater Lake, considerably higher than the ∼0.3 mm/yr long-term rate for the nearby West Klamath Lake fault zone. An unanswered question is the timing of surface-rupturing earthquakes relative to the Mazama climactic eruption. The eruption may have been preceded by a large earthquake. Alternatively, large surface-rupturing earthquakes may have occurred during the eruption, a result of decrease in east-west compressive stress during ejection of ∼50 km 3 of magma and concurrent caldera collapse.

Oregon↗

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report↗

Relationship of epithermal gold deposits to large-scale fractures in northern Nevada

Geophysical maps of northern Nevada reveal at least three and possibly six large-scale arcuate features, one of which corresponds to the northern Nevada rift that possibly extends more than 1,000 km from the Oregon- Idaho border to southern Nevada. These features may reflect deep discontinuities within the earth's crust, possibly related to the impact of the Yellowstone hot spot. Because mid-Miocene epithermal gold deposits have been shown to correlate with the northern Nevada rift, we investigate the association of other epithermal gold deposits to other similar arcuate features in northern Nevada. Mid-Miocene and younger epithermal gold- silver deposits also occur along two prominent aeromagnetic anomalies west of the northern Nevada rift. Here, we speculate that mid-Miocene deposits formed along deep fractures in association with mid-Miocene rift- related magmatism and that younger deposits preferentially followed these preexisting features. Statistical analysis of the proximity of epithermal gold deposits to these features suggests that epithermal gold deposits in northern Nevada are spatially associated with large-scale crustal features interpreted from geophysical data.

Economic Geology↗

Crater Lake, Oregon: A restricted basin with base-of-slope aprons of nonchannelized turbidites

The basin floor of Crater Lake (10-km diameter, 600-m water depth) is covered by up to 75 m of sediment–gravity-flow deposits interbedded with mud. In the upper units (8 m (thick), sand and gravel layers with numerous wedging, strong seismic reflectors characterize the base-of-slope aprons at the basin margin. These layers evolve to turbidites of mainly thin, fine-grained, basin-plain type, characterized by numerous flat and weak seismic reflectors in the central basin floor. Many individual debris-chute sources funnel sediment to base-of-slope aprons: there, coarse-grained parts of the sediment–gravity flows deposit nonchannelized beds attributed to the F, A, B turbidite facies. While traversing the base-of-slope aprons, flows evolve to sheet-flow turbidity currents that deposit D-facies beds over the central basin floor. These processes and patterns of deposition characterize small siliciclastic basins without channelized submarine fans and are common in carbonate basins of all sizes.

Geology↗

Late Cenozoic structure and correlations to seismicity along the Olympic-Wallowa Lineament, northwest United States

Late Cenozoic fault geometry, structure, paleoseismicity, and patterns of recent seismicity at two seismic zones along the Olympic-Wallowa lineament (OWL) of western Idaho, northeast Oregon, and southeast Washington indicate limited right-oblique slip displacement along multiple northwest-striking faults that constitute the lineament. The southern end of the OWL originates in the Long Valley fault system and western Snake River Plain in western Idaho, where it accommodates basin-and-range extension. Several kilometers west of the Long Valley fault system, post-middle Miocene displacement along the OWL has resulted in adjacent areas of uplift and subsidence. The OWL in northeast Oregon consists of a wide zone of northwest-striking faults and is associated with several large, inferred, pull-apart basins. The OWL then emerges from the Blue Mountain uplift as a much narrower zone of faults in the Columbia Plateau known as the Wallula fault zone (WFZ). Structural relationships in the WFZ strongly suggest that it is a right-slip extensional duplex. An ash horizon that correlates with the Mount St. Helens "J" composition (10.7 Ka) is displaced vertically 5 m by a normal fault along a segment of the WFZ. The intensity center for a damaging M = 6.1 earthquake in 1936 is located in the WFZ only a few kilometers northeast of this Holocene fault. Other youthful-appearing, strike-slip and thrust faults are located farther northwest along the OWL and may pose a seismic hazard to adjacent population centers and critical facilities.

Geological Society of America Bulletin↗

Eocene extension in Idaho generated massive sediment floods into Franciscan trench and into Tyee, Great Valley, and Green River basins

The Franciscan Complex accretionary prism was assembled during an ∼165-m.y.-long period of subduction of Pacific Ocean plates beneath the western margin of the North American plate. In such fossil subduction complexes, it is generally difficult to reconstruct details of the accretion of continent-derived sediments and to evaluate the factors that controlled accretion. New detrital zircon U-Pb ages indicate that much of the major Coastal belt subunit of the Franciscan Complex represents a massive, relatively brief, surge of near-trench deposition and accretion during Eocene time (ca. 53–49 Ma). Sediments were sourced mainly from the distant Idaho Batholith region rather than the nearby Sierra Nevada. Idaho detritus also fed the Great Valley forearc basin of California (ca. 53–37 Ma), the Tyee forearc basin of coastal Oregon (49 to ca. 36 Ma), and the greater Green River lake basin of Wyoming (50–47 Ma). Plutonism in the Idaho Batholith spanned 98–53 Ma in a contractional setting; it was abruptly superseded by major extension in the Bitterroot, Anaconda, Clearwater, and Priest River metamorphic core complexes (53–40 Ma) and by major volcanism in the Challis volcanic field (51–43 Ma). This extensional tectonism apparently deformed and uplifted a broad region, shedding voluminous sediments toward depocenters to the west and southeast. In the Franciscan Coastal belt, the major increase in sediment input apparently triggered a pulse of massive accretion, a pulse ultimately controlled by continental tectonism far within the interior of the North American plate, rather than by some tectonic event along the plate boundary itself.

California, Idaho, Oregon, Wyoming↗

Evidence for earthquake triggering of large landslides in coastal Oregon, USA

Landslides are ubiquitous along the Oregon coast. Many are large, deep slides in sedimentary rock and are dormant or active only during the rainy season. Morphology, observed movement rates, and total movement suggest that many are at least several hundreds of years old. The offshore Cascadia subduction zone produces great earthquakes every 300–500 years that generate tsunami that inundate the coast within minutes. Many slides and slide-prone areas underlie tsunami evacuation and emergency response routes. We evaluated the likelihood of existing and future large rockslides being triggered by pore-water pressure increase or earthquake-induced ground motion using field observations and modeling of three typical slides. Monitoring for 2–9 years indicated that the rockslides reactivate when pore pressures exceed readily identifiable levels. Measurements of total movement and observed movement rates suggest that two of the rockslides are 296–336 years old (the third could not be dated). The most recent great Cascadia earthquake was M 9.0 and occurred during January 1700, while regional climatological conditions have been stable for at least the past 600 years. Hence, the estimated ages of the slides support earthquake ground motion as their triggering mechanism. Limit-equilibrium slope-stability modeling suggests that increased pore-water pressures could not trigger formation of the observed slides, even when accompanied by progressive strength loss. Modeling suggests that ground accelerations comparable to those recorded at geologically similar sites during the M 9.0, 11 March 2011 Japan Trench subduction-zone earthquake would trigger formation of the rockslides. Displacement modeling following the Newmark approach suggests that the rockslides would move only centimeters upon coseismic formation; however, coseismic reactivation of existing rockslides would involve meters of displacement. Our findings provide better understanding of the dynamic coastal bluff environment and hazards from future subduction-zone earthquakes.

Oregon↗

Intensity distribution and isoseismal maps for the Nisqually, Washington, earthquake of 28 February 2001

We present isoseismal maps, macroseismic intensities, and community summaries of damage for the MW=6.8 Nisqually, Washington, earthquake of 28 February, 2001. For many communities, two types of macroseismic intensity are assigned, the traditional U.S. Geological Survey Modified Mercalli Intensities (USGS MMI) and a type of intensity newly introduced with this paper, the USGS Reviewed Community Internet Intensity (RCII). For most communities, the RCII is a reviewed version of the Community Internet Intensity (CII) of Wald and others (1999). For some communities, RCII is assigned from such non-CII sources as press reports, engineering reports, and field reconnaissance observations. We summarize differences between procedures used to assign RCII and USGS MMI, and we show that the two types of intensity are nonetheless very similar for the Nisqually earthquake. We do not see evidence for systematic differences between RCII and USGS MMI that would approach one intensity unit, at any level of shaking, but we document a tendency for the RCII to be slightly lower than MMI in regions of low intensity and slightly higher than MMI in regions of high intensity. The highest RCII calculated for the Nisqually earthquake is 7.6, calculated for zip code 98134, which includes the ?south of downtown? (Sodo) area of Seattle and Harbor Island. By comparison, we assigned a traditional USGS MMI 8 to the Sodo area of Seattle. In all, RCII of 6.5 and higher were assigned to 58 zip-code regions. At the lowest intensities, the Nisqually earthquake was felt over an area of approximately 350,000 square km (approximately 135,000 square miles) in Washington, Oregon, Idaho, Montana, and southern British Columbia, Canada. On the basis of macroseismic effects, we infer that shaking in the southern Puget Sound region was somewhat less for the 2001 Nisqually earthquake than for the Puget Sound earthquake of April 13, 1949, which had nearly the same hypocenter and magnitude. Allowing for differences in hypocenter, shaking in the 2001 earthquake was very similar to that produced by the Puget Sound earthquake of April 25, 1965. First-person accounts of the effects of the 2001 earthquake on individual households are given for some communities.

Open-File Report↗

Geomorphology and flood-plain vegetation of the Sprague and lower Sycan Rivers, Klamath Basin, Oregon

This study provides information on channel and flood-plain processes and historical trends to guide effective restoration and monitoring strategies for the Sprague River Basin, a primary tributary (via the lower Williamson River) of Upper Klamath Lake, Oregon. The study area covered the lower, alluvial segments of the Sprague River system, including the lower parts of the Sycan River, North Fork Sprague River, South Fork Sprague River, and the entire main-stem Sprague River between the confluence of the North Fork Sprague and the South Fork Sprague Rivers and its confluence with the Williamson River at Chiloquin, Oregon. The study included mapping and stratigraphic analysis of flood-plain deposits and flanking features; evaluation of historical records, maps and photographs; mapping and analysis of flood-plain and channel characteristics (including morphologic and vegetation conditions); and a 2006 survey of depositional features left by high flows during the winter and spring of 2005–06. Analyses focused on the channel and flood plain within an area defined as the “geomorphic flood plain,” an area encompassing active fluvial and riparian processes. The geomorphic flood plain was subdivided into 13 valley segments of distinct fluvial environments on the basis of valley form and major tributary junctions: nine segments span the 136.1 kilometers of main-stem Sprague River, two segments for the lower Sycan River, and one segment for each part of the South Fork Sprague and North Fork Sprague Rivers within the study area. Segment characteristics range from steep and narrow canyons to low-gradient reaches with expansive flood plains. The wide flood-plain valley segments are broadly similar; most contain a sinuous, low-gradient channel that migrates slowly across the valley bottom. The narrow valley segments include the steep, boulder-and-cobble-bed reaches at downstream and upstream ends of the study area as well as other confined valley segments that have similar gradients and substrates as adjacent unconfined valley segments, but much lower sinuosities. Although the geologic setting of the expansive South Fork valley segment resulted in historical conditions of sinuous and poorly defined channels and wet meadows, flanking levees now narrowly confine the channelized South Fork Sprague River for much of its length. Stratigraphic analyses show that before the Mazama eruption of 7,700 calendar years before present, wetlands and low flood plains flanked the main rivers of the study area. The eruption, however, covered much of the northern basin with sand- and granule-size pumice clasts, transforming channels by increasing bed-material transport and promoting bar formation and channel migration, particularly for the Sycan and North Fork Sprague Rivers, and for the Sprague River downstream of the Sycan River confluence. The South Fork Sprague River, which had much less Mazama pumice deposited in its watershed, remained a wet-meadow fluvial system until historical channelization and diking. The analysis of historical maps and aerial photographs covering the geomorphic flood plain show changes in sinuosity, migration rates, and vegetation conditions since the 1800s. Most quantitative information is for the period between 1940 and 2000. The decrease in sinuosity since 1940 for nearly all the unconfined reaches resulted partly from decreased migration rates, but mostly from several cutoffs and avulsions formed between 1940 and 1975. The river shortening and steepening possibly resulted from (1) flood-plain confinement by levees, dikes, roads, and railroads leading to deeper and faster overbank flow, thereby promoting erosion of new flood-plain channels; and (2) flood-plain disturbances such as trails, ditches, and vegetation manipulation or eradication that locally concentrated overbank flow and decreased surface resistance to channel erosion. The most evident vegetation change has been the loss of short woody vegetation adjacent to the river channels: only one-half the near-channel area covered by short woody vegetation in 1940 was similarly covered in 2000. Woody vegetation removal in the 1950s and 1960s and continuing grazing and trampling by livestock probably are the main reasons for the decrease in short woody vegetation from the dense riparian corridors of willows ( Salix sp.) and other riparian shrubs noted in the early 20th century. The alluvial corridor of the South Fork Sprague River, compared to other Sprague River Basin rivers, has been the most substantially transformed since first historical observations. The present channel is incised, straightened, and separated from the rarely inundated flood plain by levees. Despite these effects of human disturbances, many of the fundamental physical processes forming the Sprague River fluvial systems over the last several thousand years still function. In particular, flows are unregulated, sediment transport processes are active, and overbank flooding allows for floodplain deposition and erosion. Therefore, restoration of many of the native physical conditions and processes is possible without substantial physical manipulation of current conditions for much of the Sprague River study area. An exception is the South Fork Sprague River, where historical trends are not likely to reverse until it attains a more natural channel and flood-plain geometry and the channel aggrades to the extent that overbank flow becomes common.

Oregon↗

2018 update to the U.S. Geological Survey national volcanic threat assessment

When erupting, all volcanoes pose a degree of risk to people and infrastructure, however, the risks are not equivalent from one volcano to another because of differences in eruptive style and geographic location. Assessing the relative threats posed by U.S. volcanoes identifies which volcanoes warrant the greatest risk-mitigation efforts by the U.S. Geological Survey and its partners. This update of the volcano threat assessment of Ewert and others (2005) considers new research in order to determine which volcanic systems should be added or removed from the list of potentially active volcanoes, updates the scoring of active volcanoes, and updates the 24-factor hazard and exposure matrix used to create the threat ranking. The threat assessment places volcanoes into five threat categories: very low, low, moderate, high, and very high. Within all five threat categories there are changes in relative rankings of volcanoes, and in a few cases, volcanoes moved between categories owing to changes in our understanding of their hazard, unrest, and exposure factors. Scorings of hazard factors were updated for some volcanoes where new research has identified Holocene eruptive activity or clarified our understanding of Holocene eruptive history and the occurrence of particular hazards such as tephra fall or pyroclastic density currents. The most numerous scoring changes made in the threat matrix since 2005 have been made among the hazard factors, particularly those accounting for observed eruptive activity or unrest. The very low threat category underwent the greatest amount of change, dropping from 32 to 21 volcanoes, owing to better knowledge of the eruptive histories of those volcanoes. The list of 18 very high threat volcanoes determined by Ewert and others (2005) remains the same; 11 of the 18 volcanoes are located in Washington, Oregon, or California, where explosive and often snow- and ice-covered edifices can project hazards long distances to densely populated and highly developed areas. Five of the 18 very high threat volcanoes are in Alaska near important population centers, economic infrastructure, or below busy air traffic corridors. The remaining two very high threat volcanoes are on the Island of Hawaiʻi, where densely populated and highly developed areas now exist on the flanks of highly active volcanoes. The high- and moderate-threat categories are dominated by Alaskan volcanoes. In these categories the generally more active and more explosive volcanoes in Alaska can have a substantial effect on national and international aviation, and large eruptions from any of the moderate- to very-high-threat volcanoes could cause regional or national-scale disasters. This revised threat assessment includes 18 very high threat, 39 high threat, 49 moderate threat, 34 low threat, and 21 very low threat volcanoes. The total of 161 volcanoes is a decrease of 8 from the total reported by Ewert and others (2005).

Scientific Investigations Report↗

Detailed near-bottom geophysical profile across the continental slope off northern California

A geophysical profile was run across the continental slope off the California-Oregon border by use of a deeply submerged instrument package, approximately 50 m above the sea floor, containing a proton magnetometer and a 3.5-kHz transducer for shallow seismic penetration. Surface-towed seismic reflection equipment was operated concurrently. The deep-tow data show that the slope is relatively smooth; this agrees with interpretation of surface seismic profiles. Features smaller than 1 km in length can be resolved with the deep profiles but not with the surface profiles. The deep profiles show smallscale undulations less than 0.5 km long that are especially well formed on the steeper parts of the slope. These undulations may be caused by minor downslope movement of surface sediment or by depositional processes. The deep-tow and surface seismic profiles can be combined to give a more accurate structural picture of the continental slope than can be obtained with surface data alone.

California↗

Uranium contents of glassy and devitrified andesites and dacites, Mount Mazama, Oregon

By direct comparison of devitrified and granophyrically crystallized specimens with nonhydrated glassy materials from the same units, Rosholt and coworkers (Rosholt and Noble, 1969; Rosholt et al., 1971) showed that specimens of primarily crystallized but otherwise unaltered peralkaline and subalkaline rhyolite from the western United States had lost from 30 to 80 percent of the uranium that they originally possessed. They suggested that uranium was lost both during crystallization, perhaps as the volatile hexafluoride, and/or later through the action of ground water. Similar results have been obtained by Shatkov et al. (1970) and Kovalev and Maylasova (1973). Zielinski (1978) compared the uranium contents of paired nonhydrated glassy and primarily devitrified phases of a number of subalkaline rhyolitic lavas and tuffs from various localities in the western United States. He found a generally smaller degree of uranium loss than had been observed by Rosholt et al. (1971) for peralkaline materials. In addition, Zielinski noted that older specimens had, as a group, lost a greater percentage of their original uranium than had younger rocks and suggested that uranium is generally lost progressively over periods of many millions of years.

Oregon↗

Chert derived from magadiite in a lacustrine deposit near Rome, Malheur County, Oregon

Nodules and thin beds of chert occur in the upper part of the informally named Rome beds, about 8 11 km southwest of Rome, Oreg. The chert is in green to gray mudstone, about 8 m beneath a conspicuous gray and yellow zeolitic tuff. The bedded chert contains molds of saline minerals and it grades southward and marginward into nodular chert. The nodular chert is of two varieties: relatively large lobate nodules that have greenish-brown interiors and abundant saline crystal molds, and relatively small lobate nodules that have gray interiors and a surface reticulation. The latter variety is the so-called snakeskin agate prized by lapidaries. Both nodular varieties characteristically have a thin white rind. The cherts are similar, if not identical, to cherts reported from Quaternary lacustrine deposits in eastern Africa and from Pleistocene to Jurassic lacustrine deposits in Wyoming. The Rome chert probably formed from a hydrous sodium silicate precursor such as magadiite during diagenesis. Magadiite is generally a primary precipitate from a highly alkaline lake which is capable of attaining a high concentration of silica in solution.

Oregon↗