SEARCH · Search USGS

Results for “Data Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources

USGS2011

Geophysical characterization of the Lollie Levee near Conway, Arkansas, using capacitively coupled resistivity, coring, and direct push logging

A geophysical characterization of Lollie Levee near Conway, Arkansas, was conducted in February 2011. A capacitively coupled resistivity survey (using Geometric's OhmMapper) was completed along the top and toe of the 6.7-mile levee. Two-dimensional inversions were conducted on the geophysical data. As a quality-control measure, cores and direct push logs were taken at approximately 1-mile intervals along the levee. The capacitively coupled resistivity survey, the coring, and the direct push logs were used to characterize the geologic materials. Comparison of the cores and the direct push log data, along with published resistivity values, indicates that resistivity values of 200 Ohm-meters or greater represent relatively clean sand, with decreasing resistivity values occurring with increasing silt and clay content. The cores indicated that the levee is composed of a heterogeneous mixture of sand, silt, and clay. The capacitively coupled resistivity sections confirm that the levee is composed of a heterogeneous mixture of high and low resistivity materials and show that the composition of the levee varies spatially. The geologic materials underlying the levee vary spatially as a result of the geologic processes that deposited them. In general, the naturally deposited geologic materials underlying the levee contain a greater amount of low resistivity materials in the southern extent of the levee.

Faulkner, Arkansas↗

USGS2011

National Stream Quality Accounting Network and National Monitoring Network Basin Boundary Geospatial Dataset, 2008–13

This report and the accompanying geospatial data were created to assist in analysis and interpretation of water-quality data provided by the U.S. Geological Survey's National Stream Quality Accounting Network (NASQAN) and by the U.S. Coastal Waters and Tributaries National Monitoring Network (NMN), which is a cooperative monitoring program of Federal, regional, and State agencies. The report describes the methods used to develop the geospatial data, which was primarily derived from the National Watershed Boundary Dataset. The geospatial data contains polygon shapefiles of basin boundaries for 33 NASQAN and 5 NMN streamflow and water-quality monitoring stations. In addition, 30 polygon shapefiles of the closed and noncontributing basins contained within the NASQAN or NMN boundaries are included. Also included is a point shapefile of the NASQAN and NMN monitoring stations and associated basin and station attributes. Geospatial data for basin delineations, associated closed and noncontributing basins, and monitoring station locations are available at http://water.usgs.gov/GIS/metadata/usgswrd/XML/ds641_nasqan_wbd12.xml.

Data Series↗

USGS2011

Data from in situ Observations of Fish Traps Set by Fishermen in St. John Waters, U.S. Virgin Islands, 1992-94

In order to estimate (1) the trapping pressure within Virgin Islands National Park (VINP) waters, (2) the effect of fish traps on park marine resources (both fishes and habitats), and (3) the effectiveness of park regulations in protecting marine resources, traps set by fishers were visually observed and contents censused in situ in 1992, 1993, and 1994, around St. John (U.S. Virgin Islands), within and outside of park waters. A total of 1,340 individual fish (56 species and 23 families) were identified and their lengths estimated for the 211 of 285 visually censused traps that contained fish. This dataset includes for each censused trap: location, depth, substrate/habitat, trap type and construction details, in or out of park waters, and species and estimated fork length (in centimeters) of each individual fish in a trap. Analysis and interpretation of this dataset are provided in previously published reports by the author.

St. John↗

USGS2011

Groundwater geochemical and selected volatile organic compound data, Operable Unit 1, Naval Undersea Warfare Center, Division Keyport, Washington, June 2009

Previous investigations indicate that natural attenuation and biodegradation of chlorinated volatile organic compounds (VOCs) are substantial in groundwater beneath the 9-acre former landfill at Operable Unit 1 (OU 1), Naval Undersea Warfare Center, Division Keyport, Washington. Phytoremediation combined with ongoing natural attenuation processes was the preferred remedy selected by the U.S. Navy, as specified in the Record of Decision for the site. The U.S. Navy planted two hybrid poplar plantations on the landfill in spring 1999 to remove and to control the migration of chlorinated VOCs in shallow groundwater. The U.S. Geological Survey (USGS) has continued to monitor groundwater geochemistry to ensure that conditions remain favorable for contaminant biodegradation as specified in the Record of Decision. This report presents groundwater geochemical and selected VOC data collected at OU 1 by the USGS during June 15-17, 2009, in support of long-term monitoring for natural attenuation. For 2009, groundwater samples were collected from 13 wells and 9 piezometers. Samples from all wells and piezometers were analyzed for redox sensitive constituents, and samples from 10 of 18 upper-aquifer wells and piezometers and 3 of 4 intermediate-aquifer wells also were analyzed for chlorinated VOCs. Concentrations of redox sensitive constituents measured in 2009 were consistent with previous years, with dissolved hydrogen (H2) concentrations ranging from less than 0.1 to 1.8 nanomolar (nM), dissolved oxygen concentrations all at 0.6 milligram per liter or less; little to no detectable nitrate; abundant dissolved manganese, iron, and methane; and commonly detected sulfide. The reductive declorination byproducts-methane, ethane, and ethene-were not detected in samples collected from the upgradient wells in the landfill or the upper aquifer beneath the northern phytoremediation plantation. Chlorinated VOC concentrations in 2009 at most piezometers were similar to or slightly less than chlorinated VOC concentrations measured in previous years. In 2009, concentrations of reductive dechlorination byproducts ethane and ethene were less than those measured in 2008 at most northern plantation wells and piezometers. For the upper aquifer beneath the southern phytoremediation plantation, chlorinated VOC concentrations in 2009 at the piezometers were extremely high and continued to vary considerably over space and between years. At piezometer P1-9, the total chlorinated VOC concentration increased from 25,000 micrograms per liter in 2008 to more than 172,000 micrograms per liter in 2009. At piezometer P1-7 in 2009, the concentrations of trichloroethene and cis-1,2-dichloroethene (cis-DCE) were the highest to date. The reductive dechlorination byproducts ethane and ethene were detected at all wells and piezometers in the southern plantation with the exception of piezometer P1-8, although the measured concentrations were not consistently high. For the intermediate aquifer, concentrations of redox sensitive constituents and VOCs in 2009 at wells MW1-25, MW1-28, and MW1-39 were consistent with concentrations measured in previous years. Concentrations of the reductive dechlorination byproducts ethane and ethene at wells MW1-25 and MW1-28 were equal to or greater than previously measured concentrations.

Washington↗

USGS2011

Catalog of earthquake hypocenters at Alaskan volcanoes: January 1 through December 31, 2010

Between January 1 and December 31, 2010, the Alaska Volcano Observatory (AVO) located 3,405 earthquakes, of which 2,846 occurred within 20 kilometers of the 33 volcanoes with seismograph subnetworks. There was no significant seismic activity in 2010 at these monitored volcanic centers. Seismograph subnetworks with severe outages in 2009 were repaired in 2010 resulting in three volcanic centers (Aniakchak, Korovin, and Veniaminof) being relisted in the formal list of monitored volcanoes. This catalog includes locations and statistics of the earthquakes located in 2010 with the station parameters, velocity models, and other files used to locate these earthquakes.

Alaska↗

USGS2012

Archive of digital boomer subbottom data collected during USGS cruise 05FGS01 offshore east-central Florida, July 17-29, 2005

In July of 2005, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore of Florida's east coast from Flagler Beach to Daytona Beach. This report serves as an archive of unprocessed digital boomer subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 05FGS01 tells us the data were collected in 2005 for cooperative work with the FGS and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer subbottom processing system consists of an acoustic energy source that is made up of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged emits a short acoustic pulse, or shot, which propagates through the water column and shallow stratrigraphy below. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by the receiver (a hydrophone streamer), and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y format (Barry and others, 1975), except an ASCII format is used for the first 3,200 bytes of the card image header instead of the standard EBCDIC format. For a detailed description about the recorded trace headers, refer to the SEG Y Format page. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (Cohen and Stockwell, 2005). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software; refer to the Software page for links to example SU processing scripts. The processed SEG Y data were also exported to Chesapeake Technology, Inc. (CTI) SonarWeb software to produce a geospatially interactive version of the profile that allows the user to obtain a geographic location and depth from the profile for a given cursor position; this information is displayed in the status bar of the browser. Please note that clicking on the profile image switches it to "Expanded View" (a compressed image of the entire line) and cursor tracking is not available in this mode.

Florida↗

USGS2012

Groundwater-quality data for a treated-wastewater plume near the Massachusetts Military Reservation, Ashumet Valley, Cape Cod, Massachusetts, 2006-08

A plume of contaminated groundwater extends from former disposal beds at the Massachusetts Military Reservation's wastewater-treatment plant toward Ashumet Pond, coastal ponds, and Vineyard Sound, Cape Cod, Massachusetts. Treated sewage-derived wastewater was discharged to the rapid-infiltration beds for nearly 60 years before the disposal site was moved to a different location in December 1995. Water-quality samples were collected from monitoring wells, multilevel samplers, and profile borings to characterize the nature and extent of the contaminated groundwater and to observe the water-quality changes after the wastewater disposal ceased. Data are presented here for water samples collected in 2007 from 394 wells (at 121 well-cluster locations) and 780 multilevel-sampler ports (at 42 locations) and in 2006-08 at 306 depth intervals in profile borings (at 20 locations) in and near the treated-wastewater plume. Analyses of these water samples for field parameters (specific conductance, pH, dissolved oxygen and phosphate concentrations, and alkalinity); absorbance of ultraviolet/visible light; and concentrations of nitrous oxide, dissolved organic carbon, methylene blue active substances, selected anions and nutrients, including nitrate and ammonium, and selected inorganic solutes, including cations, anions, and minor elements, are presented in tabular format. The natural restoration of the sand and gravel aquifer after removal of the treated-wastewater source, along with interpretations of the water quality in the treated-wastewater plume, have been documented in several published reports that are listed in the references.

Massachusetts↗

USGS2011

Groundwater levels for selected wells in Upper Kittitas County, Washington

Groundwater levels for selected wells in Upper Kittitas County, Washington, are presented on an interactive, web-based map to document the spatial distribution of groundwater levels in the study area measured during spring 2011. Groundwater-level data and well information were collected by the U.S. Geological Survey using standard techniques and are stored in the U.S. Geological Survey National Water Information System, Groundwater Site-Inventory database.

Washington↗

USGS2001

Montana geoenvironmental explorer

This report is the result of a multidisciplinary effort to assess relative potential for acidic, metal-rich drainage in the State of Montana; evaluate alternative GIS-based modeling strategies; and provide the statewide digital spatial data produced and compiled for the project. The CD is usable on various computer systems (Windows 95, 98, NT, and 2000; MacOS 7.1 or later; many versions of UNIX and Linux; and OS/2). This report and maps are in PDF format, and the data have been provided in various GIS formats. Software for viewing the report and data is included.

Data Series↗

USGS2012

Archive of post-Hurricane Charley coastal oblique aerial photographs collected during U.S. Geological Survey field activity 04CCH01 from Marco Island to Fort DeSoto, Florida, August 15, 2004

On August 15, 2004, the U.S. Geological Survey (USGS) conducted an oblique aerial photographic survey off the southwest coast of Florida, from Marco Island to Fort DeSoto, aboard a Navajo Chieftain airplane, tail number N2KK, at an altitude of 500 ft and approximately 1000 ft offshore. These photographs were used to document coastal changes such as beach erosion and overwash caused by Hurricane Charley. They will also be used as baseline data for future coastal change. The oblique photography also served as qualitative ground truthing for the Experimental Advanced Airborne Research Lidar (EAARL) coastal topography and bathymetry data collected on August 16, 2004 (Bonisteel and others, 2009). This report serves as an archive of photographs collected during the August 15, 2004, post-Hurricane Charley coastal oblique aerial survey along with associated flight path maps, KML files, navigation files, digital Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 04CCH01 tells us the data were collected in 2004 for the Coastal Change Hazards (CCH) study and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the ID number. Two separate records of flight navigation were collected during the survey. The first was a continuous ASCII text file from the PLGR that recorded only latitudes, longitudes, and altitudes every 30 sec for the entire flight. No time values were recorded by the PLGR. The second navigation record was recorded by a Trimble Centurion GPS and converted to subtitles on the video, using a Compix Titler unit. The video was shot continuously during the survey. The video subtitles recorded day, month, year, latitude, longitude, and time in hours, minutes, and seconds. In order to produce a digital record of the navigation values that included latitude, longitude, and time, each was manually extracted from the video every 5 min, and these values were matched to the latitude and longitude in the PLGR file. Next, the time was interpolated between these 5-min fixes using Excel to produce time values for each navigation fix recorded in the PLGR file. The location of each photograph taken was determined in the following manner. A Nikon MF-14 data back marks the time each photograph was acquired on the lower right corner of the image in day, hour, and minute format (in UTC). These values were entered from the photographs into an Excel spreadsheet. It is assumed for the purposes of locating the images that the photographs were taken at a constant rate during any given minute of flight. To assign the time value in seconds to each photograph, the number of photographs taken during each minute was evenly distributed across that minute. For example, if 15 photographs were taken during minute 19:00:00, we assume that a picture was taken every 4 sec. The photographs were assigned the time values 19:00:00, 19:00:04, 19:00:08, and so on. The video time navigation file was then merged with the new interpolated photograph file based on time to produce the point of which each photograph was collected. As a result, the positions assigned to each photograph are an estimate of the aircraft position, not the location of the landmark photographed. The photographs provided here are JPEG scanned images of the analog slides. The metadata values for photo creation time, GPS latitude, GPS longitude, GPS position, keywords, credit, artist, caption, copyright, and contact were added to each photograph's EXIF header using EXIFtools (see the Software page). Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet, or, when viewing the Google Earth KML file, by clicking on the marker and then clicking on either the thumbnail or the link below the thumbnail. The KML files were created using the photographic navigation files and the CreateKML JavaScript (see the Software page). To view the survey maps and navigation files, and for more information about these items, see the Navigation page. Figure 1 displays the acquisition geometry. The tables provide detailed information about the assigned location, name, data, and time the photograph was taken along with links to the photo and corresponding 5-min contact sheet. Refer to table 1 and table 2 for details of the northern and southern county photographs, respectively.

Florida↗

USGS2012

Archive of digital boomer seismic reflection data collected offshore east-central Florida during USGS cruises 96FGS01 and 97FGS01 in November of 1996 and May of 1997

This Digital Versatile Disc (DVD) publication was prepared by an agency of the United States Government. Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of the data on any other system, nor shall the act of distribution imply any such warranty. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof.

Florida↗

USGS2012

Archive of digital boomer seismic reflection data collected offshore northeast Florida during USGS cruise 02FGS01, October 2002

Florida↗

USGS2011

Sources and preparation of data for assessing trends in concentrations of pesticides in streams of the United States, 1992–2010

This report updates a previously published water-quality dataset of 44 commonly used pesticides and 8 pesticide degradates suitable for a national assessment of trends in pesticide concentrations in streams of the United States. Water-quality samples collected from January 1992 through September 2010 at stream-water sites of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program and the National Stream Quality Accounting Network (NASQAN) were compiled, reviewed, selected, and prepared for trend analysis. The principal steps in data review for trend analysis were to (1) identify analytical schedule, (2) verify sample-level coding, (3) exclude inappropriate samples or results, (4) review pesticide detections per sample, (5) review high pesticide concentrations, and (6) review the spatial and temporal extent of NAWQA pesticide data and selection of analytical methods for trend analysis. The principal steps in data preparation for trend analysis were to (1) select stream-water sites for trend analysis, (2) round concentrations to a consistent level of precision for the concentration range, (3) identify routine reporting levels used to report nondetections unaffected by matrix interference, (4) reassign the concentration value for routine nondetections to the maximum value of the long-term method detection level (maxLT-MDL), (5) adjust concentrations to compensate for temporal changes in bias of recovery of the gas chromatography/mass spectrometry (GCMS) analytical method, and (6) identify samples considered inappropriate for trend analysis. Samples analyzed at the USGS National Water Quality Laboratory (NWQL) by the GCMS analytical method were the most extensive in time and space and, consequently, were selected for trend analysis. Stream-water sites with 3 or more water years of data with six or more samples per year were selected for pesticide trend analysis. The selection criteria described in the report produced a dataset of 21,988 pesticide samples at 212 stream-water sites. Only 21,144 pesticide samples, however, are considered appropriate for trend analysis.

Data Series↗

USGS2012

Database for USGS Map I-1970 - Map showing the thickness and character of Quaternary sediments in the glaciated United States east of the Rocky Mountains

No abstract available.

Data Series↗

USGS2012

Selected water-quality data from the Cedar River and Cedar Rapids well fields, Cedar Rapids, Iowa, 2006-10

The Cedar River alluvial aquifer is the primary source of municipal water in the Cedar Rapids, Iowa area. Municipal wells are completed in the alluvial aquifer approximately 40 to 80 feet below land surface. The City of Cedar Rapids and the U.S. Geological Survey have been conducting a cooperative study of the groundwater-flow system and water quality of the aquifer since 1992. Cooperative reports between the City of Cedar Rapids and the U.S. Geological Survey have documented hydrologic and water-quality data, geochemistry, and groundwater models. Water-quality samples were collected for studies involving well field monitoring, trends, source-water protection, groundwater geochemistry, surface-water-groundwater interaction, and pesticides in groundwater and surface water. Water-quality analyses were conducted for major ions (boron, bromide, calcium, chloride, fluoride, iron, magnesium, manganese, potassium, silica, sodium, and sulfate), nutrients (ammonia as nitrogen, nitrite as nitrogen, nitrite plus nitrate as nitrogen, and orthophosphate as phosphorus), dissolved organic carbon, and selected pesticides including two degradates of the herbicide atrazine. Physical characteristics (alkalinity, dissolved oxygen, pH, specific conductance and water temperature) were measured in the field and recorded for each water sample collected. This report presents the results of routine water-quality data-collection activities from January 2006 through December 2010. Methods of data collection, quality-assurance, and water-quality analyses are presented. Data include the results of water-quality analyses from quarterly sampling from monitoring wells, municipal wells, and the Cedar River.

Iowa↗

USGS2012

Mercury species and other selected constituent concentrations in water, sediment, and biota of Sinclair Inlet, Kitsap County, Washington, 2007-10

This report presents data collected for two U.S. Geological Survey field sampling projects related to mercury (Hg) in Sinclair Inlet: (1) the Watersheds Sources Project that evaluated the sources of mercury to Sinclair Inlet during December 2007 to March 2010, and (2) the Methylation and Bioaccumulation Project, a comprehensive examination of mercury biogeochemistry in sediment, water, and zooplankton during August 2008–February 2010. For the Watershed Sources project, nonpoint and point sources of mercury to Sinclair Inlet from the Bremerton naval complex (BNC) were evaluated by using filtered total mercury and particulate total mercury measured in water samples collected from 11 wells, 2 dry dock sump discharges, and a steam plant's effluent at the BNC. Methylmercury sources to the inlet were examined by determining filtered methylmercury concentrations in water samples collected from five wells, two dry dock sump discharges, a steam plant's effluent, five intertidal piezometers, and three stormwater drains on the BNC, as well as in samples from five creeks, two wastewater treatment facilities, and three stormwater drains in the Sinclair Inlet watershed outside of the BNC. An improved understanding of tidally modulated mercury migration to Sinclair Inlet from the BNC was gained through three intensive nearshore (tidal) sampling events of mercury species in groundwater and a nearby stormwater drain. The Methylation and Bioaccumulation Project included a comprehensive field study of mercury biogeochemistry in marine sediment, water, and zooplankton in Sinclair Inlet. Mercury, iron, and sulfur species in sediment porewater from six sites within and three sites outside of Sinclair Inlet were measured to provide insight into the processes that produce methylmercury in the sediments. Total mercury, methylmercury, dissolved organic carbon, and redox-sensitive species were measured in porewaters in the top 2 centimeters of sediment, and these data were paired with sedimentary flux measurements from core incubation experiments to connect sedimentary processes to the water column. A broad-scale study of mercury methylation potential and mercury species at 20-plus stations in Sinclair Inlet was conducted in February 2009 and 2010, June 2009, and August 2009. Sedimentary flux measurements and analysis of mercury and biogeochemicals in sediment porewater and bottom water were made at six of the broad-scale stations. Bioaccumulation processes in the water column in the context of the sedimentary flux of methylmercury were examined using monthly survey data collected between August 2008 and August 2009. The survey data included concentrations of methylmercury and isotope ratios of carbon and nitrogen in bulk zooplankton measured at four stations in Sinclair Inlet in the context of the population of bulk zooplankton ascertained by taxonomical identification. The analysis of filtered total mercury, total particulate mercury, filtered methylmercury, particulate methylmercury, chlorophyll a, isotopes of carbon and nitrogen in suspended matter, and other biogeochemical data will facilitate the examination of the biogeochemistry of mercury in Sinclair Inlet.

Washington↗

USGS2012

Groundwater-quality data in the Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study unit, 2008-2010--Results from the California GAMA Program

Groundwater quality in the 12,103-square-mile Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts (CLUB) study unit was investigated by the U.S. Geological Survey (USGS) from December 2008 to March 2010, as part of the California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring and Assessment (GAMA) Program's Priority Basin Project (PBP). The GAMA-PBP was developed in response to the California Groundwater Quality Monitoring Act of 2001 and is being conducted in collaboration with the SWRCB and Lawrence Livermore National Laboratory (LLNL). The CLUB study unit was the twenty-eighth study unit to be sampled as part of the GAMA-PBP. The GAMA CLUB study was designed to provide a spatially unbiased assessment of untreated-groundwater quality in the primary aquifer systems, and to facilitate statistically consistent comparisons of untreated-groundwater quality throughout California. The primary aquifer systems (hereinafter referred to as primary aquifers) are defined as parts of aquifers corresponding to the perforation intervals of wells listed in the California Department of Public Health (CDPH) database for the CLUB study unit. The quality of groundwater in shallow or deep water-bearing zones may differ from the quality of groundwater in the primary aquifers; shallow groundwater may be more vulnerable to surficial contamination. In the CLUB study unit, groundwater samples were collected from 52 wells in 3 study areas (Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts) in San Bernardino, Riverside, Kern, San Diego, and Imperial Counties. Forty-nine of the wells were selected by using a spatially distributed, randomized grid-based method to provide statistical representation of the study unit (grid wells), and three wells were selected to aid in evaluation of water-quality issues (understanding wells). The groundwater samples were analyzed for organic constituents (volatile organic compounds [VOCs], pesticides and pesticide degradates, and pharmaceutical compounds), constituents of special interest (perchlorate and N -nitrosodimethylamine [NDMA]), naturally-occurring inorganic constituents (trace elements, nutrients, major and minor ions, silica, total dissolved solids [TDS], alkalinity, and species of inorganic chromium), and radioactive constituents (radon-222, radium isotopes, and gross alpha and gross beta radioactivity). Naturally-occurring isotopes (stable isotopes of hydrogen, oxygen, boron, and strontium in water, stable isotopes of carbon in dissolved inorganic carbon, activities of tritium, and carbon-14 abundance) and dissolved noble gases also were measured to help identify the sources and ages of sampled groundwater. In total, 223 constituents and 12 water-quality indicators were investigated. Three types of quality-control samples (blanks, replicates, and matrix spikes) were collected at up to 10 percent of the wells in the CLUB study unit, and the results for these samples were used to evaluate the quality of the data for the groundwater samples. Field blanks rarely contained detectable concentrations of any constituent, suggesting that contamination from sample collection procedures was not a significant source of bias in the data for the groundwater samples. Replicate samples generally were within the limits of acceptable analytical reproducibility. Median matrix-spike recoveries were within the acceptable range (70 to 130 percent) for approximately 85 percent of the compounds. This study did not attempt to evaluate the quality of water delivered to consumers; after withdrawal from the ground, untreated groundwater typically is treated, disinfected, and (or) blended with other waters to maintain water quality. Regulatory benchmarks apply to water that is delivered to the consumer, not to untreated groundwater. However, to provide some context for the results, concentrations of constituents measured in the untreated groundwater were compared with regulatory and non-regulatory health-based benchmarks established by the U.S. Environmental Protection Agency (USEPA) and CDPH, and to non-regulatory benchmarks established for aesthetic concerns by CDPH. Comparisons between data collected for this study and benchmarks for drinking water are for illustrative purposes only and are not indicative of compliance or non-compliance with those benchmarks. Most inorganic constituents detected in groundwater samples from the 49 grid wells were detected at concentrations less than drinking-water benchmarks. In addition, all detections of organic constituents from the CLUB study-unit grid-well samples were less than health-based benchmarks. In total, VOCs were detected in 17 of the 49 grid wells sampled (approximately 35 percent), pesticides and pesticide degradates were detected in 5 of the 47 grid wells sampled (approximately 11 percent), and perchlorate was detected in 41 of 49 grid wells sampled (approximately 84 percent). Trace elements, major and minor ions, and nutrients were sampled for at 39 grid wells, and radioactive constituents were sampled for at 23 grid wells; most detected concentrations were less than health-based benchmarks. Exceptions in the grid-well samples include seven detections of arsenic greater than the USEPA maximum contaminant level (MCL-US) of 10 micrograms per liter (μg/L); four detections of boron greater than the CDPH notification level (NL-CA) of 1,000 μg/L; six detections of molybdenum greater than the USEPA lifetime health advisory level (HAL-US) of 40 μg/L; two detections of uranium greater than the MCL-US of 30 μg/L; nine detections of fluoride greater than the CDPH maximum contaminant level (MCL-CA) of 2 milligrams per liter (mg/L); one detection of nitrite plus nitrate (NO 2- +NO 3- ), as nitrogen, greater than the MCL-US of 10 mg/L; and four detections of gross alpha radioactivity (72-hour count), and one detection of gross alpha radioactivity (30-day count), greater than the MCL-US of 15 picocuries per liter. Results for constituents with non-regulatory benchmarks set for aesthetic concerns showed that a manganese concentration greater than the CDPH secondary maximum contaminant level (SMCL-CA) of 50 μg/L was detected in one grid well. Chloride concentrations greater than the recommended SMCL-CA benchmark of 250 mg/L were detected in three grid wells, and one of these wells also had a concentration that was greater than the upper SMCL-CA benchmark of 500 mg/L. Sulfate concentrations greater than the recommended SMCL-CA benchmark of 250 mg/L were measured in six grid wells. TDS concentrations greater than the SMCL-CA recommended benchmark of 500 mg/L were measured in 20 grid wells, and concentrations in 2 of these wells also were greater than the SMCL-CA upper benchmark of 1,000 mg/L.

California↗

USGS2000

Assessment of the alluvial sediments in the Big Thompson River Valley, Colorado

To obtain subsurface geologic information about the alluvium in the Big Thompson River valley, S-wave refraction data were collected along three roads that cross the valley. The refraction data were used to estimate velocities and thickness for a layered-earth model; from these models, three cross sections of the river valley were constructed. These cross sections show the thickness and the gross stratigraphy of the alluvium.

Colorado↗