Search USGS⌕ Search

SEARCH · Search USGS

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
USGS2006

JAMSTEC multibeam surveys and submersible dives around the Hawaiian Islands: A collaborative Japan-USA exploration of Hawaii's deep seafloor

This database release, USGS Data Series 171, contains data collected during four Japan-USA collaborative cruises that characterize the seafloor around the Hawaiian Islands. The Japan Agency for Marine-Earth Science and Technology (JAMSTEC) sponsored cruises in 1998, 1999, 2001, and 2002, to build a greater understanding of the deep marine geology around the Hawaiian Islands. During these cruises, scientists surveyed over 600,000 square kilometers of the seafloor with a hull-mounted multibeam seafloor-mapping sonar system (SEA BEAM® 2112), observed the seafloor and collected samples using robotic and manned submersible dives, collected dredge and piston-core samples, and performed single-channel seismic surveys.

Hawaii↗
USGS2010

Radionuclides, trace elements, and radium residence in phosphogypsum of Jordan

Voluminous stockpiles of phosphogypsum (PG) generated during the wet process production of phosphoric acid are stored at many sites around the world and pose problems for their safe storage, disposal, or utilization. A major concern is the elevated concentration of long-lived 226Ra (half-life = 1,600 years) inherited from the processed phosphate rock. Knowledge of the abundance and mode-of-occurrence of radium (Ra) in PG is critical for accurate prediction of Ra leachability and radon (Rn) emanation, and for prediction of radiation-exposure pathways to workers and to the public. The mean (??SD) of 226Ra concentrations in ten samples of Jordan PG is 601 ?? 98 Bq/kg, which falls near the midrange of values reported for PG samples collected worldwide. Jordan PG generally shows no analytically significant enrichment (< 10%) of 226Ra in the finer (< 53 ??m) grain size fraction. Phosphogypsum samples collected from two industrial sites with different sources of phosphate rock feedstock show consistent differences in concentration of 226Ra and rare earth elements, and also consistent trends of enrichment in these elements with increasing age of PG. Water-insoluble residues from Jordan PG constitute <10% of PG mass but contain 30-65% of the 226Ra. 226Ra correlates closely with Ba in the water-insoluble residues. Uniformly tiny (< 10 ??m) grains of barite (barium sulfate) observed with scanning electron microscopy have crystal morphologies that indicate their formation during the wet process. Barite is a well-documented and efficient scavenger of Ra from solution and is also very insoluble in water and mineral acids. Radium-bearing barite in PG influences the environmental mobility of radium and the radiation-exposure pathways near PG stockpiles. ?? 2010 US Government.

Environmental Geochemistry and Health↗
USGS2017

A decade of insights into grassland ecosystem responses to global environmental change

Earth’s biodiversity and carbon uptake by plants, or primary productivity, are intricately interlinked, underlie many essential ecosystem processes, and depend on the interplay among environmental factors, many of which are being changed by human activities. While ecological theory generalizes across taxa and environments, most empirical tests of factors controlling diversity and productivity have been observational, single-site experiments, or meta-analyses, limiting our understanding of variation among site-level responses and tests of general mechanisms. A synthesis of results from ten years of a globally distributed, coordinated experiment, the Nutrient Network (NutNet), demonstrates that species diversity promotes ecosystem productivity and stability, and that nutrient supply and herbivory control diversity via changes in composition, including invasions of non-native species and extinction of native species. Distributed experimental networks are a powerful tool for tests and integration of multiple theories and for generating multivariate predictions about the effects of global changes on future ecosystems.

Nature Ecology & Evolution↗
USGS2007

Crossing disciplines and scales to understand the critical zone

The Critical Zone (CZ) is the system of coupled chemical, biological, physical, and geological processes operating together to support life at the Earth's surface. While our understanding of this zone has increased over the last hundred years, further advance requires scientists to cross disciplines and scales to integrate understanding of processes in the CZ, ranging in scale from the mineral-water interface to the globe. Despite the extreme heterogeneities manifest in the CZ, patterns are observed at all scales. Explanations require the use of new computational and analytical tools, inventive interdisciplinary approaches, and growing networks of sites and people.

Elements↗
USGS2023

Multi-year tracing of spatial and temporal dynamics of post-fire aeolian sediment transport using rare earth elements provide insights into grassland management

Aeolian sediment transport occurs as a function of, and with feedback to ecosystem changes and disturbances. Many desert grasslands are undergoing rapid changes in vegetation, including the encroachment of woody plants, which alters fire regimes and in turn can change the spatial and temporal patterns of aeolian sediment transport. We investigated aeolian sediment transport and spatial distribution of sediment in the surface soil for 7 years following a prescribed fire using a multiple rare earth element (REE) tracer-based approach in a shrub-encroached desert grassland in the northern Chihuahuan desert. Results indicate that even though the aeolian horizontal sediment mass flux increased approximately three-fold in the first windy season in the burned areas compared to control areas, there were no significant differences after three windy seasons. The soil surface of bare microsites was the major contributor of aeolian sediments in unburned areas (87%), while the shrub microsites contributed the least (<2%) during the observation period. However, after the prescribed fire, the contribution of aeolian sediments from shrub microsites increased considerably (∼40%), indicating post-fire microsite-scale sediment redistribution. The findings of this study, which is the first to use multiple REE tracers for multi-year analysis of the spatial and temporal dynamics of aeolian sediment transport, illustrate how disturbance by prescribed fire can influence aeolian processes and alters dryland soil geomorphology in which distinct soils develop over time at very fine spatial scales of individual plants.

New Mexico↗
USGS1968

Chapter 3: Television observations from Surveyor VII

Surveyor VII, the last spacecraft of the Surveyor series, successfully landed at 01:05:36 GMT, January 10, 1968, on the outer rim flank of the large crater Tycho, in the southern part of the Moon. The spacecraft landed about 30 hours after local lunar sunrise and transmitted about 21,000 pictures during the remainder of the first lunar day of operation. On January 22, after local sunset, almost 700 pictures were taken of the Earth, the Sun's corona and parts of the lunar surface illuminated by earthlight. On February 12, Surveyor VII was revived for operation on the second lunar day approximately 120 hours after local lunar sunrise. The camera was then operated in the 200-line (low-resolution) mode because of loss in horizontal sweep in the 600-line (high-resolution) mode. About 45 pictures were taken in the 200-line mode during the second lunar day before loss of power caused suspension of camera operation.

Book chapter↗
USGS2017

Influence of pore pressure change on coseismic volumetric strain

Coseismic strain is fundamentally important for understanding crustal response to changes of stress after earthquakes. The elastic dislocation model has been widely applied to interpreting observed shear deformation caused by earthquakes. The application of the same theory to interpreting volumetric strain, however, has met with difficulty, especially in the far field of earthquakes. Predicted volumetric strain with dislocation model often differs substantially, and sometimes of opposite signs, from observed coseismic volumetric strains. The disagreement suggests that some processes unaccounted for by the dislocation model may occur during earthquakes. Several hypotheses have been suggested, but none have been tested quantitatively. In this paper we first examine published data to highlight the difference between the measured and calculated static coseismic volumetric strains; we then use these data to provide quantitative test of the model that the disagreement may be explained by the change of pore pressure in the shallow crust. The test allows us to conclude that coseismic change of pore pressure may be an important mechanism for coseismic crustal strain and, in the far field, may even be the dominant mechanism. Thus in the interpretation of observed coseismic crustal strain, one needs to account not only for the elastic strain due to fault rupture but also for the strain due to coseismic change of pore pressure.

Earth and Planetary Science Letters↗
USGS2019

Delayed dynamic triggering of disposal-induced earthquakes observed by a dense array in Northern Oklahoma

Recent increases in earthquake occurrence rates in Oklahoma have been linked to the injection of large volumes of saltwater, a byproduct of oil and gas extraction. Here we present a detailed study of remote earthquake triggering in an area of active injection‐induced seismicity in northern Oklahoma using data from the LArge‐n Seismic Survey in Oklahoma (LASSO) temporary array and nearby permanent broadband seismic stations. We estimate changes in earthquake rates and calculate the Coulomb failure stress changes on potential receiver faults due to passing teleseismic surface waves. A statistically significant increase in seismicity is observed ∼8 hr after the 16 April 2016 M w 7.8 Ecuador earthquake. The Coulomb stress changes associated with the Ecuador earthquake are on the order of ∼1 kPa. Physical mechanisms consistent with the observed dynamic stress threshold include failure driven by activation of aseismic slip or hydrological response of the fault system.

Oklahoma↗
USGS2020

Submarine landslide kinematics derived from high-resolution imaging in Port Valdez, Alaska

Submarine landslides caused by strong ground shaking during the M9.2 1964 Great Alaska earthquake generated a tsunami that destroyed much of the old town of Valdez, Alaska, and was responsible for 32 deaths at that location. We explore structural details of the 1964 landslide deposit, as well as landslide deposits from earlier events, in order to characterize kinematics of the landslide process. We present a new high‐resolution seismic reflection data set that images the 1964 landslide deposit and six pre‐1964 deposits with great detail. These deposits are represented by thick packages (~7–23 m) of debris within >500 m of fjord sedimentation above basement. Internal slide structures are associated with distinctive landslide failure mechanisms, including detailed erosional and depositional features and structures resolved within both landslide blocks and distal debris flow layers. Based on comparisons of deposit volume from subbottom structure and differenced bathymetry, we refine prior interpretations of the source of failed material. New data show evidence for basal erosion and reworking of fjord‐floor sedimentation. Additionally, material comprising the 1964 landslide appears to have been translated and deformed by lateral thrusting, rather than having been sourced entirely from upslope evacuation zones. Taking into account these complexities in depositional patterns, we show variations in slide size through Holocene time and relate the history of landslides to the paleoseismic record. Collectively, these new observations demonstrate that Port Valdez has a repeated history of large submarine landslides, which are likely associated with large megathrust earthquakes.

Alaska↗
USGS2023

The weight of New York City: Possible contributions to subsidence from anthropogenic sources

New York City faces accelerating inundation risk from sea level rise, subsidence, and increasing storm intensity from natural and anthropogenic causes. Here we calculate a previously unquantified contribution to subsidence from the cumulative mass and downward pressure exerted by the built environment of the city. We enforce that load distribution in a multiphysics finite element model to calculate expected subsidence. Complex surface geology requires multiple rheological soil models to be applied; clay rich soils and artificial fill are calculated to have the highest post-construction subsidence as compared with more elastic soils. Minimum and maximum calculated building subsidence ranges from 0 to 600 mm depending on soil/rock physical parameters and foundation modes. We compare modeled subsidence and surface geology to observed subsidence rates from satellite data (Interferometric Synthetic Aperture Radar and Global Positioning System). The comparison is complicated because the urban load has accumulated across a much longer period than measured subsidence rates, and there are multiple causes of subsidence. Geodetic measurements show a mean subsidence rate of 1–2 mm/year across the city that is consistent with regional post-glacial deformation, though we find some areas of significantly greater subsidence rates. Some of this deformation is consistent with internal consolidation of artificial fill and other soft sediment that may be exacerbated by recent building loads, though there are many possible causes. New York is emblematic of growing coastal cities all over the world that are observed to be subsiding (Wu et al., 2022, https://doi.org/10.1029/2022GL098477 ), meaning there is a shared global challenge of mitigation against a growing inundation hazard.

New York↗
USGS2012

Strain accumulation along the Laguna Salada Fault, Baja California, Mexico

Strain accumulation observed over the 1978–1991 interval in a 30×100 km aperture trilateration network spanning the Laguna Salada fault is described by the principal strain rates 0.101±0.012 strain/yr N80°E±2° and −0.021±0.012 strain/yr N10°W±2°, extension reckoned positive. These strain accumulation rates have been corrected to remove coseismic effects of the nearby 1979 Imperial Valley ( = 6.5), 1980 Victoria (Baja California) ( = 6.4), 1987 Superstition Hills ( = 6.5), and 1987 Elmore Ranch ( = 5.9) earthquakes. The observed strain rates indicate extension at a rate of about 0.08 strain/yr perpendicular to the trend (N35°W) of the Salton trough as well as a right‐lateral tensor shear strain rate 0.05 strain/yr across it. The extension perpendicular to the trough is observed neither farther north near the Salton Sea nor farther south across the Gulf of California. However, Holocene slip on the Laguna Salada fault, about equal parts right‐lateral and normal slip, is consistent with the observed strain accumulation. A simple dislocation model intended to explain the observed strain accumulation as a product of slip at depth on the Laguna Salada fault would require that the fault be listric.

California↗
USGS2012

Paleomagnetic constraints on rotation within Mount Abbot quadrangle, central Sierra Nevada, California

The regional photolineament pattern in Mount Abbot quadrangle in the central Sierra Nevada is sigmoidal in plan view. The fractures in the southwest section of the quadrangle, near Florence Lake, strike N10°–20°E, while those in the central section, along Bear Creek, strike N50°–70°E and those in the northeast strike N25°–40°E. A paleomagnetic investigation was undertaken to determine if this sigmoidal pattern was formed by kinking of originally straight photolineaments after the rock mass cooled below the blocking temperature. If the inner limb of the kink rotated 40°–60° clockwise with respect to the outer limbs, then there should be a similar difference in the paleomagnetic declinations between the Florence Lake and Bear Creek areas. The paleomagnetic results indicate a clockwise difference in declination of 13.4°±7° of the Bear Creek area with respect to Florence Lake. Thus the sigmoidal pattern could not have formed entirely by rotation after cooling below the blocking temperature. It is also possible that the observed declination discrepancy is due to tilting, apparent polar wander, or paleomagnetic dispersion instead of rotation. Sigmoidal patterns, formed by kink folding, occur on the outcrop scale with inner limb rotations of 15°–30°; three of these kinks were sampled to test the paleomagnetic method in an area of demonstrable rotation. The data from these sites indicate that although no difference in declination is evident, a reheating event may have occurred which could have removed any rotation from the paleomagnetic record. Reheating, possibly due to the circulation of hydrothermal fluids, may have been causally related to the outcrop scale kinking, since reheating is not observed away from the outcrop scale kinks. The data further indicate that there may have been continuous deformation of the rock mass during the formation of the kinks.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Holocene eolian activity in the Minot dune field, North Dakota

Stabilized eolian sand is common over much of the Great Plains region of the United States and Canada, including a subhumid area of ~1500 km 2 near Minot, North Dakota. Eolian landforms consist of sand sheets and northwest-trending parabolic dunes. Dunes and sand sheets in the Minot field are presently stabilized by a cover of prairie grasses or oak woodland. Stratigraphic studies and accelerator mass spectrometry radiocarbon dating of paleosols indicate at least two periods of eolian sand movement in the late Holocene. Pedologic data suggest that all of the dune field has experienced late Holocene dune activity, though not all parts of the dune field may have been active simultaneously. Similar immobile element (Ti, Zr, La, Ce) concentrations support the interpretation that eolian sands are derived from local glaciofluvial and glaciolacustrine sediments. However, glaciolacustrine and glaciofluvial source sediments have high Ca concentrations from carbonate minerals, whereas dune sands are depleted in Ca. Because noneolian-derived soils in the area are calcareous, these data indicate that the Minot dune field may have had extended periods of activity in the Holocene, such that eolian abrasion removed soft carbonate minerals. The southwest-facing parts of some presently stabilized dunes were active during the 1930s drought, but were revegetated during the wetter years of the 1940s. These observations indicate that severe droughts accompanied by high temperatures are the most likely cause of Holocene eolian activity.

North Dakota↗
USGS2024

Evaluation of debris-flow building damage forecasts

Reliable forecasts of building damage due to debris flows may provide situational awareness and guide land and emergency management decisions. Application of debris-flow runout models to generate such forecasts requires combining hazard intensity predictions with fragility functions that link hazard intensity with building damage. In this study, we evaluated the performance of building damage forecasts for the 9 January 2018 Montecito postfire debris-flow runout event, in which over 500 buildings were damaged. We constructed forecasts using either peak debris-flow depth or momentum flux as the hazard intensity measure and applied each approach using three debris-flow runout models (RAMMS, FLO-2D, and D-Claw). Generated forecasts were based on averaging multiple simulations that sampled a range of debris-flow volume and mobility, reflecting typical sources and magnitude of pre-event uncertainty. We found that only forecasts made with momentum flux and the D-Claw model could correctly predict the observed number of damaged buildings and the spatial patterns of building damage. However, the best forecast only predicted 50 % of the observed damaged buildings correctly and had coherent spatial patterns of incorrectly predicted building damage (i.e., false positives and false negatives). These results indicate that forecasts made at the building level reliably reflect the spatial pattern of damage but do not support interpretation at the individual building level. We found the event size strongly influences the number of damaged buildings and the spatial pattern of debris-flow depth and velocity. Consequently, future research on the link between precipitation and the volume of sediment mobilized may have the greatest effect on reducing uncertainty in building damage forecasts. Finally, because we found that both depth and velocity are needed to predict building damage, comparing debris-flow models against spatially distributed observations of building damage is a more stringent test for model fidelity than comparison against the extent of debris-flow runout.

Natural Hazards and Earth System Sciences↗
USGS2019

Submarine permafrost map in the arctic modelled using 1D transient heat flux (SuPerMAP)

Offshore permafrost plays a role in the global climate system, but observations of permafrost thickness, state, and composition are limited to specific regions. The current global permafrost map shows potential offshore permafrost distribution based on bathymetry and global sea level rise. As a first‐order estimate, we employ a heat transfer model to calculate the subsurface temperature field. Our model uses dynamic upper boundary conditions that synthesize Earth System Model air temperature, ice mass distribution and thickness, and global sea level reconstruction and applies globally distributed geothermal heat flux as a lower boundary condition. Sea level reconstruction accounts for differences between marine and terrestrial sedimentation history. Sediment composition and pore water salinity are integrated in the model. Model runs for 450 ka for cross‐shelf transects were used to initialize the model for circumarctic modeling for the past 50 ka. Preindustrial submarine permafrost (i.e., cryotic sediment), modeled at 12.5‐km spatial resolution, lies beneath almost 2.5 ×10 6 km 2 of the Arctic shelf. Our simple modeling approach results in estimates of distribution of cryotic sediment that are similar to the current global map and recent seismically delineated permafrost distributions for the Beaufort and Kara seas, suggesting that sea level is a first‐order determinant for submarine permafrost distribution. Ice content and sediment thermal conductivity are also important for determining rates of permafrost thickness change. The model provides a consistent circumarctic approach to map submarine permafrost and to estimate the dynamics of permafrost in the past.

Journal of Geophysical Research C: Oceans↗
USGS1987

Increased solubility of quartz in water due to complexing by organic compounds

Quartz is the most stable natural solid phase of silica. It weathers extremely slowly at the Earth's surface 1 , and often resists weathering even after all other silicate minerals have been degraded. However, there is ample evidence from both ancient and modern environments indicating enhanced dissolution and mobility of silica under conditions that cannot easily be explained by the inorganic controls of quartz solubility 2 . Increased solubility of quartz has been observed particularly in soils rich in organic material; however, no direct link between dissolved organic carbon and dissolved silica has been identified 3 . Here we present evidence for an increase in the solubility of quartz in a natural water brought about by dissolved organic compounds. These compounds were produced by the biodegradation of petroleum, and consist largely of a complex mixture of organic acids. We propose that silica is being complexed and mobilized by these organic acids in waters having close to neutral p H.

Nature↗
USGS2012

Radiometric calibration of the Landsat MSS sensor series

Multispectral remote sensing of the Earth using Landsat sensors was ushered on July 23, 1972, with the launch of Landsat-1. Following that success, four more Landsat satellites were launched, and each of these carried the Multispectral Scanner System (MSS). These five sensors provided the only consistent multispectral space-based imagery of the Earth's surface from 1972 to 1982. This work focuses on developing both a consistent and absolute radiometric calibration of this sensor system. Cross-calibration of the MSS was performed through the use of pseudoinvariant calibration sites (PICSs). Since these sites have been shown to be stable for long periods of time, changes in MSS observations of these sites were attributed to changes in the sensors themselves. In addition, simultaneous data collections were available for some MSS sensor pairs, and these were also used for cross-calibration. Results indicated substantial differences existed between instruments, up to 16%, and these were reduced to 5% or less across all MSS sensors and bands. Lastly, this paper takes the calibration through the final step and places the MSS sensors on an absolute radiometric scale. The methodology used to achieve this was based on simultaneous data collections by the Landsat-5 MSS and Thematic Mapper (TM) instruments. Through analysis of image data from a PICS location and through compensating for the spectral differences between the two instruments, the Landsat-5 MSS sensor was placed on an absolute radiometric scale based on the Landsat-5 TM sensor. Uncertainties associated with this calibration are considered to be less than 5%.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS1998

Surface deformation as a guide to kinematics and three-dimensional shape of slow-moving, clay-rich landslides, Honolulu, Hawaii

Two slow-moving landslides in Honolulu, Hawaii, were the subject of photogrammetric measurements, field mapping, and subsurface investigation to learn whether surface observations can yield useful information consistent with results of subsurface investigation. Mapping focused on structural damage and on surface features such as scarps, shears, and toes. The x-y-z positions of photo-identifiable points were obtained from aerial photographs taken at three different times. The measurements were intended to learn if the shape of the landslide failure surface can be determined from systematic surface observations and whether surface observations about deformation are consistent with photogrammetrically-obtained displacement gradients. Field and aerial photographic measurements were evaluated to identify the boundaries of the landslides, distinguish areas of incipient landslide enlargement, and identify zones of active and passive failure in the landslides. Data reported here apply mainly to the Alani-Paty landslide, a translational, earth-block landslide that damaged property in a 3.4-ha residential area. It began moving in the 1970s and displacement through 1991 totaled 4 m. Thickness, determined from borehole data, ranges from about 7 to 10 m; and the slope of the ground surface averages about 9°. Field evidence of deformation indicated areas of potential landslide enlargement outside the well-formed landslide boundaries. Displacement gradients obtained photogrammetrically and deformation mapping both identified similar zones of active failure (longitudinal stretching) and passive failure (longitudinal shortening) within the body of the landslide. Surface displacement on the landslide is approximately parallel to the broadly concave slip surface.

Hawaii↗