SEARCH · Search USGS

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources

USGS2016

Aeromagnetic map of northwest Utah and adjacent parts of Nevada and Idaho

Two aeromagnetic surveys were flown to promote further understanding of the geology and structure in northwest Utah and adjacent parts of Nevada and Idaho by serving as a basis for geophysical interpretations and by supporting geological mapping, water and mineral resource investigations, and other topical studies. Although this area is in general sparsely populated, (except for cities and towns along the Wasatch Front such as Ogden and Brigham City), it encompasses metamorphic core complexes in the Grouse Creek and Raft River Mountains (figure 1) of interest to earth scientists studying Cenozoic extension. The region was shaken in 1909 and 1934 by M6+ earthquakes east of the Hansel Mountains (Doser, 1989; Arabasz and others, 1994); damage from the 1934 earthquake occurred as far east as Logan, Utah (http:// www.seis.utah.edu/lqthreat/nehrp_htm/1934hans/n1934ha1. shtml#urbse). The presence of Quaternary shield volcanoes and bimodal Pleistocene volcanism in Curlew Valley (Miller and others, 1995; Felger and others, 2016) as well as relatively high temperature gradients encountered in the Indian Cove drillhole in the north arm of Great Salt Lake (Blackett and others, 2014) may indicate some potential for geothermal energy development in the area (Miller and others, 1995). The area also hosts four significant mining districts, in the northern Pilot Range, the Goose Creek Mountains in the northwest corner of the map, the southern end of the Promontory Mountains, and the southwest part of the Raft River Mountains, although production notably waned after World War II (Doelling, 1980). Other prospects of interest include those in the southern Grouse Creek Mountains, Silver Island, and the northern Newfoundland Mountains. Large areas of northwest Utah are covered by young, surficial deposits or by Great Salt Lake or are down-dropped into deep Cenozoic basins, making extrapolation of bedrock geology from widely spaced exposures difficult or tenuous (figure 1). Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Magnetic data reflect magnetization variations within the crust and are well suited for mapping the distribution of mafic igneous rocks, although felsic igneous rocks, some mineralized zones, and other rock types also can produce measurable magnetic anomalies. For these reasons, the U.S. Geological Survey (USGS) and Utah Geological Survey (UGS) contracted for the collection of aeromagnetic data in this area.

Idaho, Nevada, Utah↗

USGS1983

Geological setting of oil shales in the Permian phosphoria formation and some of the geochemistry of these rocks

Recent studies of the Meade Peak and the Retort Phosphatic Shale Members of the Phosphoria Formation have investigated the organic carbon content and some aspects of hydrocarbon generation from these rocks. Phosphorite has been mined from the Retort and Meade Peak members in southeastern Idaho, northern Utah, western Wyoming and southwestern Montana. Organic carbon-rich mudstone beds associated with the phosphorite in these two members also were natural sources of petroleum. These mudstone beds were differentially buried throughout the region so that heating of these rocks has been different from place to place. Most of the Phosphoria source beds have been deeply buried and naturally heated to catagenetically form hydrocarbons. Deepest burial was in eastern Idaho and throughout most of the northeastern Great Basin where high ambient temperatures have driven the catagenesis to its limit and beyond to degrade or to destroy the hydrocarbons. In southwest Montana, however, burial in some areas has been less than 2 km, ambient temperatures remained low and the kerogen has not produced hydrocarbons (2). In these areas in Montana, the kerogen in the carbonaceous mudstone has retained the potential for hydrocarbon generation and the carbon-rich Retort Member is an oil shale from which hydrocarbons can be synthetically extracted. The Phosphoria Formation was deposited in a foreland basin between the Cordilleran geosyncline and the North American craton. This foreland basin, which coincides with the area of deposition of the two organic carbon-rich mudstone members of the Phosphoria, has been named the Sublett basin (Maughan, 1979). The basin has a northwest-southeast trending axis and seems to have been deepest in central Idaho where deep-water sedimentary rocks equivalent to the Phosphoria Formation are exceptionally thick. The depth of the basin was increasingly shallower away from central Idaho toward the Milk River uplift - a land area in Montana, the ancestral Rocky Mountains. The basin is composed of land areas in Colorado, the Humboldt highland in northeastern Nevada and intervening carbonate shelves in Utah and Wyoming. The phosphorites and the carbonaceous mudstones were deposited on the foreslope between the carbonate and littoral sand deposits on the shelf and the dominantly cherty mudstone sediments in the axial part of the basin. Paleomagnetic evidence indicates that in the Permian the region would have been within the northern hemispheric trade wind belt; and wind-direction studies determined from studies of sand dunes, indicate that the prevailing winds from the Milk River uplift would have blown offshore across the Phosphoria sea. Offshore winds would have carried surface water away from the shore and generated upwelling in the sea in eastern Idaho and adjacent areas in Montana, Wyoming and Utah. Prior to deposition of the Phosphoria, the region was the site of extensive deposition of shallow-water carbonate sediments. Equivalent rocks in the northern part of the basin are dominantly sandstone derived from the adjacent Milk River uplift and similar sandstone strata in the southeastern sector were derived from the ancestral Rocky Mountains uplift. Tectonic subsidence of the Sublett basin in part of the region seems to have provided a sea-floor profile favorable for upwelling circulation and the shift in deposition from regional carbonates and local sandstone into a more complex depositional pattern that included the accumulation of the mudstone-chert-phosphorite facies that comprises the Phosphoria Formation. High biological productivity and the accumulation of sapropel on the sea floor is associated with contemporary coastal upwelling (1) and similar environmental and depositional conditions are attributed to the rich accumulations of organic matter in the Phosphoria Formation. Sapropelic mudstone and phosphorite composing the Meade Peak Member are approximately 60 m thick near the center of the Sublett basin. The Meade

Conference Paper↗

USGS1984

Geology of El Chichon volcano, Chiapas, Mexico

The (pre-1982) 850-m-high andesitic stratovolcano El Chicho??n, active during Pleistocene and Holocene time, is located in rugged, densely forested terrain in northcentral Chiapas, Me??xico. The nearest neighboring Holocene volcanoes are 275 km and 200 km to the southeast and northwest, respectively. El Chicho??n is built on Tertiary siltstone and sandstone, underlain by Cretaceous dolomitic limestone; a 4-km-deep bore hole near the east base of the volcano penetrated this limestone and continued 770 m into a sequence of Jurassic or Cretaceous evaporitic anhydrite and halite. The basement rocks are folded into generally northwest-trending anticlines and synclines. El Chicho??n is built over a small dome-like structure superposed on a syncline, and this structure may reflect cumulative deformation related to growth of a crustal magma reservoir beneath the volcano. The cone of El Chicho??n consists almost entirely of pyroclastic rocks. The pre-1982 cone is marked by a 1200-m-diameter (explosion?) crater on the southwest flank and a 1600-m-diameter crater apparently of similar origin at the summit, a lava dome partly fills each crater. The timing of cone and dome growth is poorly known. Field evidence indicates that the flank dome is older than the summit dome, and K-Ar ages from samples high on the cone suggest that the flank dome is older than about 276,000 years. At least three pyroclastic eruptions have occurred during the past 1250 radiocarbon years. Nearly all of the pyroclastic and dome rocks are moderately to highly porphyritic andesite, with plagioclase, hornblende and clinopyroxene the most common phenocrysts. Geologists who mapped El Chicho??n in 1980 and 1981 warned that the volcano posed a substantial hazard to the surrounding region. This warning was proven to be prophetic by violent eruptions that occurred in March and April of 1982. These eruptions blasted away nearly all of the summit dome, blanketed the surrounding region with tephra, and sent pyroclastic flows down radial drainages on the flanks of the cone; about 0.3 km3 of material (density of all products normalized to 2.6 g cm-3) was erupted. More debris entered the stratosphere than from any other volcanic eruption within at least the past two decades. Halite and a calcium sulfate mineral (anhydrite?) recovered from the stratospheric cloud, and anhydrite as a common accessory mineral in 1982 juvenile erupted products may reflect contamination of El Chicho??n magma by the evaporite sequence revealed by drilling. ?? 1984.

Journal of Volcanology and Geothermal Research↗

USGS2024

A far-traveled basalt lava flow in north-central Oregon, USA

Widely separated basalt lava-flow outcrops in north-central Oregon, USA, expose products of a single eruptive episode. A Pliocene lava flow, here informally termed the Tetherow basalt, issued from vents near Redmond, in the Deschutes basin of Oregon, as a plains-forming basalt now exposed in continuous outcrops northward for 60 km. A similar basalt crops out 47 km farther north, near Maupin, within what was then a slightly incised ancestral Deschutes River canyon. The northernmost outcrops of this lava flow lie on Fulton Ridge, in the Dalles basin, near the confluence of the Deschutes and Columbia Rivers. Complementary lines of evidence confirm these rocks are all from the same volcanic eruption. Outcrops in the Deschutes and Dalles basins are chemically similar high-titanium basalts, petrographically similar to each other and distinct from other lava flows in the area. Paleomagnetic directions from 11 scattered sites are similar and indistinguishable by various tests for a common mean. Three new 40 Ar/ 39 Ar ages indicate the Tetherow basalt eruption occurred between 5.5 Ma and 5.0 Ma, likely at ca. 5.2 Ma. The widely separated outcrops of this lava flow span 160–180 km along the ancestral Deschutes River and downstream Columbia River. The lava flow’s length and erupted volume of 15–20 km 3 are extraordinarily large in a non-flood-basalt setting. This lava flow provides a datum with which to describe regional physiographic history, assess incision rates, and infer tectonic history. Spanning different depositional basins, the Tetherow basalt is a useful chronologic and stratigraphic marker bed.

Oregon↗

USGS2003

Preliminary publications book 2 from project on mineral resources, metallogenesis, and tectonics of northeast Asia

This is the Web version of a CD-ROM publication. This report consists of summary major compilations and syntheses accomplished in the six-year project through April 2003 for the study on the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia (Eastern and Southern Siberia, Mongolia, Northeastern China, South Korea, and Japan). The major scientific goals and benefits of the project are to: (1) provide a comprehensive international data base on the mineral resources of the region that is the first, extensive knowledge available in English; (2) provide major new interpretations of the origin and crustal evolution of mineralizing systems and their host rocks, thereby enabling enhanced, broad-scale tectonic reconstructions and interpretations; and (3) promote trade and scientific and technical exchanges between the North America and Northeast Asia. Data from the project are providing sound scientific data and interpretations for commercial firms, governmental agencies, universities, and individuals that are developing new ventures and studies in the project area, and for land-use planning studies that deal with both mineral potential issues. Northeast Asia has vast potential for known and undiscovered mineral deposits; however, little information existed in English in the West until publication of products from this project. Consequently, data and interpretations from the project are providing basic knowledge for major scientific, commercial, national, and international endeavors by other interested individuals and groups.

Siberia↗

USGS2014

Deposit model for heavy-mineral sands in coastal environments

This report provides a descriptive model of heavy-mineral sands, which are sedimentary deposits of dense minerals that accumulate with sand, silt, and clay in coastal environments, locally forming economic concentrations of the heavy minerals. This deposit type is the main source of titanium feedstock for the titanium dioxide (TiO 2 ) pigments industry, through recovery of the minerals ilmenite (Fe 2+ TiO 3 ), rutile (TiO 2 ), and leucoxene (an alteration product of ilmenite). Heavy-mineral sands are also the principal source of zircon (ZrSiO 4 ) and its zirconium oxide; zircon is often recovered as a coproduct. Other heavy minerals produced as coproducts from some deposits are sillimanite/kyanite, staurolite, monazite, and garnet. Monazite [(Ce,La,Nd,Th)PO 4 ] is a source of rare earth elements as well as thorium, which is used in thorium-based nuclear power under development in India and elsewhere. The processes that form coastal deposits of heavy-mineral sands begin inland. High-grade metamorphic and igneous rocks that contain heavy minerals weather and erode, contributing detritus composed of sand, silt, clay, and heavy minerals to fluvial systems. Streams and rivers carry the detritus to the coast, where they are deposited in a variety of coastal environments, such as deltas, the beach face (foreshore), the nearshore, barrier islands or dunes, and tidal lagoons, as well as the channels and floodplains of streams and rivers in the coastal plain. The sediments are reworked by waves, tides, longshore currents, and wind, which are effective mechanisms for sorting the mineral grains on the basis of differences in their size and density. The finest-grained, most dense heavy minerals are the most effectively sorted. The result is that heavy minerals accumulate together, forming laminated or lens-shaped, heavy-mineral-rich sedimentary packages that can be several meters and even as much as tens of meters thick. Most economic deposits of heavy-mineral sands are Paleogene, Neogene, and Quaternary in age; some are modern coastal deposits. Superimposed on these basic processes of ore formation are a multitude of contributing and modifying factors, such as the following: Strong, sustained wave action moves sand from offshore to the shore, where the sand and heavy minerals are sorted by size and density. Mineral sorting occurs mainly on the upper part of the hightide swash (wave) zone. Fine-grained sands and heavy minerals on the foreshore can be remobilized by winds, forming heavy mineral-rich sand dunes behind the beach. Longshore drift combined with the geomorphology of the coast exert strong influence on the location of the heavy-mineral sands deposits. Sea level changes are a function of climatic changes, such as ice ages. Rises in regional sea level (transgression) and lowering of sea level (regression) strongly influence the deposition and preservation of heavy-mineral sands. The majority of heavy-mineral sands accumulation appears related to seaward progradation of the shore during regression events. Local faulting may affect the geomorphology of the coast, which controls the distribution of heavy mineral deposition in a coastal basin. Heavy mineral grains appear to weather primarily after their deposition in the coastal plain; this weathering is caused by groundwaters, humic acids, and other intrabasinal fluids. This weathering can enhance the TiO 2 content of ilmenite. Iron is leached from ilmenite during weathering, which thereby upgrades the TiO 2 content of the ilmenite, forming leucoxene. The resulting deposits of heavy-mineral sands can be voluminous. Individual bodies of heavy mineral-rich sands are typically about 1 kilometer wide and more than 5 kilometers long. Many heavy-mineral sands districts extend for more than 10 kilometers and contain several individual deposits that are spread along an ancient or modern strandline. Reported thicknesses of economic deposits range from 3 to 45 meters. Individual ore deposits typically comprise at least 10 megatonnes of ore (the total size of the individual sand-silt body), whose overall heavy-mineral content is 2 to greater than 10 percent. Heavy-mineral sands deposits are relatively easy to mine because they are weakly to poorly consolidated, and they are relatively easy to process. From a geoenvironmental standpoint, mining of heavy mineral-sands generates little or no acid or solubilized metals. However, environmental and human health concerns related to such mining include potential effects on indigenous flora and fauna, effects on local hydrology, and issues related to processing and storing thorium-bearing monazite, owing to its radioactivity. Regional exploration for deposits of heavy-mineral sands can utilize the analyses of stream sediment samples for Ti, Hf, the rare earth elements, Th, and U, and geophysical surveys, particularly radiometric (gamma-ray spectrometry for K, U, and Th) and magnetic methods. Geophysical anomalies may be small, and surveys are generally more successful when conducted close to sources of interest.

Scientific Investigations Report↗

USGS2015

Surface monitoring of microseismicity at the Decatur, Illinois, CO2 sequestration demonstration site

Sequestration of CO2 into subsurface reservoirs can play an important role in limiting future emission of CO2 into the atmosphere (e.g., Benson and Cole, 2008). For geologic sequestration to become a viable option to reduce greenhouse gas emissions, large-volume injection of supercritical CO2 into deep sedimentary formations is required. These formations offer large pore volumes and good pore connectivity and are abundant (Bachu, 2003; U.S. Geological Survey Geologic Carbon Dioxide Storage Resources Assessment Team, 2013). However, hazards associated with injection of CO2 into deep formations require evaluation before widespread sequestration can be adopted safely (Zoback and Gorelick, 2012). One of these hazards is the potential to induce seismicity on pre-existing faults or fractures. If these faults or fractures are large and critically stressed, seismic events can occur with magnitudes large enough to pose a hazard to surface installations and, possibly more critical, the seal integrity of the cap rock. The Decatur, Illinois, carbon capture and storage (CCS) demonstration site is the first, and to date, only CCS project in the United States that injects a large volume of supercritical CO2 into a regionally extensive, undisturbed saline formation. The first phase of the Decatur CCS project was completed in November 2014 after injecting a million metric tons of supercritical CO2 over three years. This phase was led by the Illinois State Geological Survey (ISGS) and included seismic monitoring using deep borehole sensors, with a few sensors installed within the injection horizon. Although the deep borehole network provides a more comprehensive seismic catalog than is presented in this paper, these deep data are not publicly available. We contend that for monitoring induced microseismicity as a possible seismic hazard and to elucidate the general patterns of microseismicity, the U.S. Geological Survey (USGS) surface and shallow borehole network described below provides an adequate event detection threshold. The formation targeted for injection is the Mount Simon Sandstone, which is laterally extensive, has high porosity and permeability and has the potential to host future CCS projects due to its favorable hydrologic characteristics and proximity to industrial sources of CO2 (Birkholzer and Zhou, 2009). At Decatur, CO2, a byproduct of ethanol production at the Archer Daniels Midland (ADM) facility, is compressed to supercritical state and injected at 2.1 km depth into the 460 m thick Mount Simon Sandstone. This sandstone has varying properties, ranging from the lower, fine- to coarse-grained sandstone with high permeability and porosity, to the middle and upper Mount Simon, which consist of planar, cross-bedded layers of varied permeability and porosity (Leetaru and Freiburg, 2014). The changes in permeability and porosity within the Mount Simon Sandstone, due to depositional and diagenetic differences, create horizontal baffles, which inhibit vertical flow and restrict the injected CO2 to remain near the injection horizon (Bowen et al., 2011). The lowest portion of the Mount Simon Sandstone overlying the Precambrian rhyolite basement is the Pre-Mount Simon interval, generally < 15 m in thickness and composed of fine- to medium-grain size sandstone that is highly deformed (Leetaru and Freiburg, 2014). The basement rhyolite has a clayrich matrix and is fractured, with significant alterations within the fractures. The primary sealing cap rock is the Eau Claire Formation, a 100–150 m thick unit at a depth of roughly 1.69 km (Leetaru and Freiburg, 2014). The Maquoketa Shale Group and the New Albany Shale serve as secondary and tertiary seals at shallower depths of ∼820 and ∼650 m, respectively. The ISGS managed the Illinois Basin–Decatur Project (IBDP), a three-year project beginning in November 2011, during which carbon dioxide was injected at a rate of ∼1000 metric tons per day until November 2014 (Finley et al., 2011, 2013). ADM manages the Illinois Industrial CCS (ICCS) project, which will inject ∼3000 metric tons/day into a second injection well starting in the summer of 2015. The USGS began monitoring microseismicity with a 13- station seismic network at Decatur in July 2013 (Fig. 1). This network provides good detection capabilities and azimuthal (focal sphere) coverage for microseismicity with moment magnitudes (Mw) above about −0:5. Here, we report on 19 months of microseismicity monitoring at the Decatur CO2 sequestration site, which permits a detailed look at the evolution and character of injection-induced seismicity.

Illinois↗

USGS2011

Carbonatite and alkaline intrusion-related rare earth element deposits–A deposit model

The rare earth elements are not as rare in nature as their name implies, but economic deposits with these elements are not common and few deposits have been large producers. In the past 25 years, demand for rare earth elements has increased dramatically because of their wide and diverse use in high-technology applications. Yet, presently the global production and supply of rare earth elements come from only a few sources. China produces more than 95 percent of the world's supply of rare earth elements. Because of China's decision to restrict exports of these elements, the price of rare earth elements has increased and industrial countries are concerned about supply shortages. As a result, understanding the distribution and origin of rare earth elements deposits, and identifying and quantifying our nation's rare earth elements resources have become priorities. Carbonatite and alkaline intrusive complexes, as well as their weathering products, are the primary sources of rare earth elements. The general mineral deposit model summarized here is part of an effort by the U.S. Geological Survey's Mineral Resources Program to update existing models and develop new descriptive mineral deposit models to supplement previously published models for use in mineral-resource and mineral-environmental assessments. Carbonatite and alkaline intrusion-related REE deposits are discussed together because of their spatial association, common enrichment in incompatible elements, and similarities in genesis. A wide variety of commodities have been exploited from carbonatites and alkaline igneous rocks, such as rare earth elements, niobium, phosphate, titanium, vermiculite, barite, fluorite, copper, calcite, and zirconium. Other enrichments include manganese, strontium, tantalum, thorium, vanadium, and uranium.

Open-File Report↗

USGS2008

Pesticide Occurrence and Distribution in the Lower Clackamas River Basin, Oregon, 2000-2005

Pesticide occurrence and distribution in the lower Clackamas River basin was evaluated in 2000?2005, when 119 water samples were analyzed for a suite of 86?198 dissolved pesticides. Sampling included the lower-basin tributaries and the Clackamas River mainstem, along with paired samples of pre- and post-treatment drinking water (source and finished water) from one of four drinking water-treatment plants that draw water from the lower river. Most of the sampling in the tributaries occurred during storms, whereas most of the source and finished water samples from the study drinking-water treatment plant were obtained at regular intervals, and targeted one storm event in 2005. In all, 63 pesticide compounds were detected, including 33 herbicides, 15 insecticides, 6 fungicides, and 9 pesticide degradation products. Atrazine and simazine were detected in about half of samples, and atrazine and one of its degradates (deethylatrazine) were detected together in 30 percent of samples. Other high-use herbicides such as glyphosate, triclopyr, 2,4-D, and metolachlor also were frequently detected, particularly in the lower-basin tributaries. Pesticides were detected in all eight of the lower-basin tributaries sampled, and were also frequently detected in the lower Clackamas River. Although pesticides were detected in all of the lower basin tributaries, the highest pesticide loads (amounts) were found in Deep and Rock Creeks. These medium-sized streams drain a mix of agricultural land (row crops and nurseries), pastureland, and rural residential areas. The highest pesticide loads were found in Rock Creek at 172nd Avenue and in two Deep Creek tributaries, North Fork Deep and Noyer Creeks, where 15?18 pesticides were detected. Pesticide yields (loads per unit area) were highest in Cow and Carli Creeks, two small streams that drain the highly urban and industrial northwestern part of the lower basin. Other sites having relatively high pesticide yields included middle Rock Creek and upper Noyer Creek, which drain basins having nurseries, pasture, and rural residential land. Some concentrations of insecticides (diazinon, chlorpyrifos, azinphos-methyl, and p,p?-DDE) exceeded U.S. Environmental Protection Agency (USEPA) aquatic-life benchmarks in Carli, Sieben, Rock, Noyer, Doane, and North Fork Deep Creeks. One azinphos-methyl concentration in Doane Creek (0.21 micrograms per liter [?g/L]) exceeded Federal and State of Oregon benchmarks for the protection of fish and benthic invertebrates. Concentrations of several other pesticide compounds exceeded non-USEPA benchmarks. Twenty-six pesticides or degradates were detected in the Clackamas River mainstem, typically at much lower concentrations than those detected in the lower-basin tributaries. At least 1 pesticide was detected in 65 percent of 34 samples collected from the Clackamas River, with an average of 2?3 pesticides per sample. Pesticides were detected in 9 (or 60 percent) of the 15 finished water samples collected from the study water-treatment plant during 2003?2005. These included 10 herbicides, 1 insecticide, 1 fungicide, 1 insect repellent, and 2 pesticide degradates. The herbicides diuron and simazine were the most frequently detected (four times each during the study), at concentrations far below human-health benchmarks?USEPA Maximum Contaminant Levels or U.S. Geological Survey human Health-Based Screening Levels (HBSLs). The highest pesticide concentration in finished drinking water was 0.18 ?g/L of diuron, which was 11 times lower than its low HBSL benchmark. Although 0?2 pesticides were detected in most finished water samples, 9 and 6 pesticides were detected in 2 storm-associated samples from May and September 2005, respectively. Three of the unregulated compounds detected in finished drinking water (diazinon-oxon, deethylatrazine [CIAT], and N, N-diethyl-m-toluamide [DEET]) do not have human-health benchmarks available for comparison. Although most of the 51 curren

Scientific Investigations Report↗

USGS2012

Long-term growth of Desert Tortoises ( Gopherus agassizii ) in a southern Nevada population

Knowledge of growth rates, age at maturity, and longevity are important aspects of a species life history and are directly applicable to life table creation and population viability analyses. We measured the growth of a cohort of 17 semi-wild Desert Tortoises (Gopherus agassizii) located in Rock Valley, Nevada over a 47-yr period beginning in 1963. The tortoises were initially marked as hatchling and juvenile animals between the years 1963 and 1965 and ranged in size from 47 to 77 mm in plastron length. We assigned ages of 1-4 yr to the tortoises at initial capture based on their body size. These tortoises were recaptured, measured, and weighed approximately annually since their initial capture. Growth of male and female tortoises did not differ significantly until animals reached the age of 23-25 yr. Annual tortoise growth was correlated with the production of ephemeral vegetation, while accounting for size, sex, and repeated measurements of the animals as well as the interval between measurements. However, the production of ephemeral plants was likewise highly correlated (non-linearly) with winter rainfall. Stochastic predation events between 2003 and 2007 decimated this cohort of tortoises. The average age of the long-term surviving tortoises from this cohort was 43 yr with a range of 39-47 yr. Twelve of the tortoises survived to the age of 39 yr and 11 of the 12 reached 40 yr.

Journal of Herpetology↗

USGS1999

Seasonal shorebird use of intertidal habitats in Cook Inlet, Alaska

Seasonal shorebird use of intertidal habitats of Cook Inlet, Alaska, was studied from February 1997 to February 1999 using aerial surveys as the principal method of assessment. On-ground studies were conducted to validate aerial survey results and to assess shorebird use of vegetated habitats, especially during the breeding season. Twenty-eight species of shorebirds were recorded using the area, ranging from all being present during spring to a single species present during winter. The annual pattern of use was characterized by the sudden occurrence and rapid increase in numbers of birds during early May and their abrupt departure in mid- to late-May. During this period, survey totals frequently exceeded 150,000 birds per day. Comparatively little use occurred during summer and autumn, but use was significant from late autumn to early spring when Rock Sandpipers ( Calidris ptilocnemis ) resided in the Inlet. A single species, the Western Sandpiper ( C. maun ), was by far the numerically dominant shorebird, accounting for three-fourths of all birds recorded. The Pacific flyway population of this species numbers 2-3 million birds of which we estimated 20-47% used Cook Inlet embayments, especially southern Redoubt Bay. Cook .Inlet also supported between 11 and 21% of the Pacific flyway population of Dunlin ( C. alpina pacifica ) and what may be the entire population (ca. 20,000 birds) of the nominate race of the Rock Sandpiper ( C. p. ptilocnemis ). Several areas along the west side of Cook Inlet proved to be extremely important to shorebirds. Southern Redoubt Bay supported 73% of all shorebirds during spring (average 32,000 per day) while Susitna Flats accounted for 82% of use during winter (8,400 per day). International criteria used to assess the conservation importance of particular wetland sites to shorebirds not only place Cook Inlet at the highest level of recognition but afford similar recognition to several individual embayments therein. The large human population and the extent of oil and natural gas production facilities occurring in the Cook Inlet region potentially pose serious risks to shorebirds and intertidal habitats.

Alaska↗

USGS2007

Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch-Fort Worth Basin, Texas

This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as "assessment units," the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch-Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch-Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells-Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (???300 ft; ???91 m) Barnett Shale that is within the gas-generation window (Ro ??? 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

USGS2007

Riding the storm--landslide danger in the San Francisco Bay Area

Movie Synopsis: --A catastrophic 1982 rainstorm triggered 18,000 landslides in the Bay Area, claiming 25 lives and causing $66 million in property damage. --The combination of steep slopes, weak rocks, and intense winter storms make Bay Area uplands an ideal setting for landslides. --Landslides include both swift, potentially deadly debris flows and slower, but destructive deepseated slides. --Learn what USGS scientists have discovered about landslide dynamics and which slopes are most susceptible to sliding. --Hear the devastating stories of Bay Area residents affected by landslides and learn to recognize the danger signs.

General Information Product↗

USGS2012

Hydrogen isotope investigation of amphibole and biotite phenocrysts in silicic magmas erupted at Lassen Volcanic Center, California

Hydrogen isotope ratio, water content and Fe 3 + /Fe 2 + in coexisting amphibole and biotite phenocrysts in volcanic rocks can provide insight into shallow pre- and syn-eruptive magmatic processes such as vesiculation, and lava drainback with mixing into less devolatilized magma that erupts later in a volcanic sequence. We studied four ~ 35 ka and younger eruption sequences (i.e. Kings Creek, Lassen Peak, Chaos Crags, and 1915) at the Lassen Volcanic Center (LVC), California, where intrusion of crystal-rich silicic magma mushes by mafic magmas is inferred from the varying abundances of mafic magmatic inclusions (MMIs) in the silicic volcanic rocks. Types and relative proportions of reacted and unreacted hydrous phenocryst populations are evaluated with accompanying chemical and H isotope changes. Biotite phenocrysts were more susceptible to rehydration in older vesicular glassy volcanic rocks than coexisting amphibole phenocrysts. Biotite and magnesiohornblende phenocrysts toward the core of the Lassen Peak dome are extensively dehydroxylated and reacted from prolonged exposure to high temperature, low pressure, and higher f O2 conditions from post-emplacement cooling. In silicic volcanic rocks not affected by alteration, biotite phenocrysts are often relatively more dehydroxylated than are magnesiohornblende phenocrysts of similar size; this is likely due to the ca 10 times larger overall bulk H diffusion coefficient in biotite. A simplified model of dehydrogenation in hydrous phenocrysts above reaction closure temperature suggests that eruption and quench of magma ascended to the surface in a few hours is too short a time for substantial H loss from amphibole. In contrast, slowly ascended magma can have extremely dehydrogenated and possibly dehydrated biotite, relatively less dehydrogenated magnesiohornblende and reaction rims on both phases. Eruptive products containing the highest proportions of mottled dehydrogenated crystals could indicate that within a few days prior to eruption, degassed vesiculated magma or lava had drained back down the volcanic conduit and mixed with less devolatilized magma. The vesiculated magma contained hydrous phenocrysts with lattice damage, which locally raised the effective H diffusion coefficient by ca 10–100 × and resulted in increased mineral dehydrogenation. Remobilization of dacite magma mush by relatively more reduced mafic magma appears to have generated further f O2 variations in May 1915 as oxidized magma from shallow levels circulated to depths where dehydrogenation of hydrous phenocrysts began. The δD Magmatic H2O expressed in LVC acid hot springs is likely a mixture derived from devolatilized ascending mafic magmas and crystallizing silicic magma mush.

California↗

USGS2010

Temperature trends and preservation rates in the Deep Tuscaloosa Formation, Judge Digby Field, Louisiana

Judge Digby Field in Pointe Coupe Parish, Louisiana, exhibits some of the highest cumulative natural gas production from the lower Tuscaloosa Formation (Upper Cretaceous) in the Gulf Coast. The average production depth in Judge Digby Field is approximately 22,000 ft. The 400°F temperatures typically encountered at depth in Judge Digby Field are anomalously low when compared to temperature trends extrapolated to similar depths regionally. At this depth, the minimum and maximum temperatures for all servoirs in Gulf Coast producing gas fields are 330 and 550°F, respectively; the average temperature is 430°F. The relatively depressed geothermal gradients in Judge Digby Field may be due to high sediment preservation rates, which may have delayed the thermal equilibration of the sediment package with respect to the surrounding rock. Analyzing burial history and thermal maturation indicates that the deep Tuscaloosa trend in Judge Digby Field is currently in the gas generation window. Using temperature trends as an exploration tool may have important implications for undiscovered hydrocarbons at greater depths in currently producing reservoirs, and for settings that are geologically analogous to Judge Digby Field.

Louisiana↗

USGS2006

Factors affecting occurrence and distribution of selected contaminants in ground water from selected areas in the Piedmont Aquifer System, Eastern United States, 1993-2003

Results of ground-water sampling from 255 wells and 19 springs in 11 studies done by the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program within the Piedmont Aquifer System (PAS) were analyzed to determine the factors affecting occurrence and distribution of selected contaminants. The contaminants, which were selected on the basis of potential human-health effects, included nitrate, pesticides, volatile organic compounds (VOCs), and radon. The PAS was subdivided on the basis of the general rock type of the aquifers into three areas for the study—crystalline, carbonate, and siliciclastic. The 11 studies were designed to areally represent an individual aquifer rock type and overall are representative of the PAS in their distribution; 7 studies are in the crystalline-rock aquifers, 3 studies are in the siliciclasticrock aquifers, and 1 study is in the carbonate-rock aquifers. Four of the studies were focused on land use, 1 in an agricultural area and 3 in urban areas. The remaining studies had wells representing a range of land-use types. Analysis of results of nitrate sampling indicated that in 8 of the 10 areas where nitrate concentrations were measured, median concentrations of nitrate were below 3 mg/L (milligrams per liter); 2 of the 10 areas had statistically significant higher median concentrations when compared to the other 8 areas. The agricultural land-use study in the carbonate-rock aquifer in the Lower Susquehanna River Basin had the highest median nitrate concentration (11 mg/L), and 60 percent of the wells sampled exceeded the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level (MCL) of 10 mg/L. The major aquifer study in the crystalline-rock aquifer of the Lower Susquehanna River Basin Study Unit had the second-highest median nitrate concentration. Nitrate concentrations were positively correlated to the percentage of agricultural land use around the well, the total input of nitrogen from all sources, dissolved oxygen concentration, lithology, depth to water, and soil-matrix characteristics. A linear regression model was used to determine that increases in the percentage of agricultural land use, the input of nitrogen from all sources, and dissolved oxygen were the most significant variables affecting increased concentration of nitrate. A logistic regression model was used to determine that those same factors were the most significant variables affecting whether or not the nitrate concentration would exceed 4 mg/L. Of the analysis of samples from 253 wells and 19 springs for 47 pesticides, no sample had a pesticide concentration that exceeded any USEPA MCL. The most frequently detected pesticide was desethyl atrazine, a degradation product of atrazine; the detection frequency was 47 percent. Other frequently detected pesticides included atrazine, metolachlor, simazine, alachlor, prometon, and dieldrin. Detection frequency was affected by the analytical reporting limits; the frequency of detection was somewhat lower when all pesticides were censored to the highest common detection limit. Source factors such as agricultural land use (for agricultural herbicides), urban land use (for insecticides), and the application rate were found to have positive statistical correlations with pesticide concentration. Transport factors such as depth to water and percentage of well-drained soils, sand, or silt typically were positively correlated with higher pesticide concentrations. Sampling for VOCs was conducted in 187 wells and 19 springs that were sampled for 59 VOCs. There were 137 detections of VOCs above the common censoring limit of 0.2 µg/L. The most frequently detected VOCs were chloroform, a trihalomethane, and methyl-tert butyl ether (MTBE), a fuel oxygenate. Seventy-nine wells had at least one VOC detected. The detections were related to land use and well depth. Kendall’s tau correlations indicated a significant positive correlation between chloroform concentration and urban land use, leaking underground storage tanks, population density, and well depth. MTBE concentrations also were positively correlated to urban land use, leaking underground storage tanks, population density, and well depth. Radon was sampled at 205 sites. The subdivisions used for analysis of other contaminants were not adequate for analysis of radon because radon varies on the basis of variations in mineralogy that are not reflected by the general lithologic categories used for the rest of the studies. Concentrations of radon were highest in areas where the crystalline-rock aquifers had felsic mineralogy, and the lowest concentrations of radon were in areas where the crystalline-rocks aquifer had mafic mineralogy. Water from wells in siliciclastic-rock aquifers had concentrations of radon lower than that in the felsic crystalline-rock aquifers. More than 90 percent of the wells sampled for radon exceeded the proposed MCL of 300 pCi/L (picoCuries per liter); however, only 13 percent of those wells had concentrations in water that exceeded the alternative maximum contaminant level (AMCL), a higher level that can be used by municipalities addressing other sources of radon exposure. Overall, concentrations of constituents were related to land-use factors for nitrate, pesticides, VOCs, and to aquifer lithology for radon. None of the 47 pesticides or 59 VOCs analyzed exceeded the MCLs where those constituents were sampled. Concentrations exceeded the MCL for nitrate in 11 percent of the wells sampled. Nearly 91 percent of the wells sampled exceeded the proposed MCL for radon. Additional sampling in selected areas would improve overall understanding of the PAS and increase the possibility of creating predictive models of ground-water quality in this area.

Alabama, Delaware, Georgia, Maryland, New Jersey, ↗

USGS1994

A rock-magnetic record from Lake Baikal, Siberia: Evidence for Late Quaternary climate change

Rock-magnetic measurements of sediment cores from the Academician Ridge region of Lake Baikal, Siberia show variations related to Late Quaternary climate change. Based upon the well-dated last glacial-interglacial transition, variations in magnetic concentration and mineralogy are related to glacial-interglacial cycles using a conceptual model. Interglacial intervals are characterized by low magnetic concentrations and a composition that is dominated by low coercivity minerals. Glacial intervals are characterized by high magnetic concentrations and increased amounts of high coercivity minerals. The variation in magnetic concentration is consistent with dilution by diatom opal during the more productive interglacial periods. We also infer an increased contribution of eolian sediment during the colder, windier, and more arid glacial conditions when extensive loess deposits were formed throughout Europe and Asia. Eolian transport is inferred to deliver increased amounts of high coercivity minerals as staining on eolian grains during the glacial intervals. Variations in magnetic concentration and mineralogy of Lake Baikal sediment correlate to the SPECMAP marine oxygen-isotope record. The high degree of correlation between Baikal magnetic concentration/mineralogy and the SPECMAP oxygen-isotope record indicates that Lake Baikal sediment preserves a history of climate change in central Asia for the last 250 ka. This correlation provides a method of estimating the age of sediment beyond the range of the radiocarbon method. Future work must include providing better age control and additional climate proxy data, thereby strengthening the correlation of continental and marine climate records. ?? 1994.

Lake Baikal↗

USGS1980

Stable carbon isotopes of HCO3- in oil-field waters-implications for the origin of CO2

The δ 13 C values of dissolved HCO 3 − in 75 water samples from 15 oil and gas fields (San Joaquin Valley, Calif., and the Houston-Galveston and Corpus Christi areas of Texas) were determined to study the sources of CO 2 of the dissolved species and carbonate cements that modify the porosity and permeability of many petroleum reservoir rocks. The reservoir rocks are sandstones which range in age from Eocene through Miocene. The δ 13 C values of total HCO 3 − indicate that the carbon in the dissolved carbonate species and carbonate cements is mainly of organic origin. The range of δ 13 C values for the HCO 3 − of these waters is −20–28 per mil relative to PDB. This wide range of δ 13 C values is explained by three mechanisms. Microbiological degradation of organic matter appears to be the dominant process controlling the extremely low and high δ 13 C values of HCO 3 − in the shallow production zones where the subsurface temperatures are less than 80°C. The extremely low δ 13 C values (< −10 per mil) are obtained in waters where concentrations of SO 4 2− are more than 25 mg/l and probably result from the degradation of organic acid anions by sulfate-reducing bacteria ( SO 4 2− + CH 3 COO − → 2 HCO 3 − + HS − ). The high δ 13 C values probably result from the degradation of these anions by methanogenic bacteria ( CH 3 COO − + H 2 O ai HCO 3 − + CH 4 ). Thermal decarboxylation of short-chain aliphatic acid anions (principally acetate) to produce CO 2 and CH 4 is probably the major source of CO 2 for production zones with subsurface temperatures greater than 80°C. The δ 13 C values of HCO 3 − for waters from zones with temperatures greater than 100°C result from isotopic equilibration between CO 2 and CH 4 . At these high temperatures, δ 13 C values of HCO 3 − decrease with increasing temperatures and decreasing concentrations of these acid anions.

Geochimica et Cosmochimica Acta↗