Search USGS⌕ Search

SEARCH · Search USGS

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources
USGS1999

Petrology and geochemistry of late-stage intrusions of the A-type, mid-Proterozoic Pikes Peak batholith (Central Colorado, USA): Implications for petrogenetic models

The ~1.08 Ga anorogenic, A-type Pikes Peak batholith (Front Range, central Colorado) is dominated by coarse-grained, biotite ?? amphibole syenogranites and minor monzogranites, collectively referred to as Pikes Peak granite (PPG). The batholith is also host to numerous small, late-stage plutons that have been subdivided into two groups (e.g. Wobus, 1976. Studies in Colorado Field Geology, Colorado School of Mines Professional Contributions, Colorado): (1) a sodic series (SiO2= ~44-78 wt%; K/Na=0.32-1.36) composed of gabbro, diabase, syenite/quartz syenite and fayalite and sodic amphibole granite; and (2) a potassic series (SiO2= ~ 70-77 wt%; K/Na=0.95-2.05), composed of biotite granite and minor quartz monzonite. Differences in major and trace element and Nd isotopic characteristics for the two series indicate different petrogenetic histories. Potassic granites of the late-stage intrusions appear to represent crustal anatectic melts derived from tonalite sources, based on comparison of their major element compositions with experimental melt products. In addition, Nd isotopic characteristics of the potassic granites [??(Nd)(1.08 Ga) = -0.2 to -2.7] overlap with those for tonalites/granodiorites [ca 1.7 Ga Boulder Creek intrusions; ??(Nd)(1.08 Ga) = -2.4 to -3.6] exposed in the region. Some of the partial melts evolved by fractionation dominated by feldspar. The late-stage potassic granites share geochemical characteristics with most of the PPG, which is also interpreted to have an anatectic origin involving tonalitic crust. The origin of monzogranites associated with the PPG remains unclear, but mixing between granitic and mafic or intermediate magmas is a possibility. Syenites and granites of the sodic series cannot be explained as crustal melts, but are interpreted as fractionation products of mantle-derived mafic magmas with minor crustal input. High temperature and low oxygen fugacity estimates (e.g. Frost et al., 1988. American Mineralogist 73, 727-740) support a basalt fractionation origin, as do ??(Nd) values for sodic granitoids [??(Nd)(1.08 Ga) = +2.2 to -0.7], which are higher than ??(Nd) values for Colorado crust at 1.08 Ga (ca -1.0 to -4.0). Enrichments in incompatible elements (e.g. rare earth elements, Rb, Y) and depletions in compatible elements (e.g. Cr, Sr, Ba) in the sodic granitoids compared to coeval mafic rocks are also consistent with fractionation. Accessory mineral fractionation, release of fluorine-rich volatiles and/or removal of pegmatitic fluids could have modified abundances of Ce, Nb, Zr and Y in some sodic granitoid magmas. Gabbros and mafic dikes associated with the sodic granitoids have ??(Nd)(1.08 Ga) of -3.0 to +3.5, which are lower than depleted mantle at 1.08 Ga, and their trace element characteristics suggest derivation from mantle sources that were previously affected by subduction-related processes. However, it is difficult to characterize the mantle component in these magmas, because assimilation of crust during magma ascent could also result in their observed geochemical features. The Pikes Peak batholith is composed of at least two petrogenetically different granite types, both of which exhibit geochemical characteristics typical of A-type granites. Models proposed for the petrogenesis of the granitoids imply the existence of mafic rocks at depth and addition of juvenile material to the crust in central Colorado at ~ 1.1 Ga.

Precambrian Research↗
USGS2003

Characterization of petroleum reservoirs in the Eocene Green River Formation, Central Uinta Basin, Utah

The oil-productive Eocene Green River Formation in the central Uinta Basin of northeastern Utah is divided into five distinct intervals. In stratigraphically ascending order these are: 1) Uteland Butte, 2) Castle Peak, 3) Travis, 4) Monument Butte, and 5) Beluga. The reservoir in the Uteland Butte interval is mainly lacustrine limestone with rare bar sandstone beds, whereas the reservoirs in the other four intervals are mainly channel and lacustrine sandstone beds. The changing depositional environments of Paleocene-Eocene Lake Uinta controlled the characteristics of each interval and the reservoir rock contained within. The Uteland Butte consists of carbonate and rare, thin, shallow-lacustrine sandstone bars deposited during the initial rise of the lake. The Castle Peak interval was deposited during a time of numerous and rapid lake-level fluctuations, which developed a simple drainage pattern across the exposed shallow and gentle shelf with each fall and rise cycle. The Travis interval records a time of active tectonism that created a steeper slope and a pronounced shelf break where thick cut-and-fill valleys developed during lake-level falls and rises. The Monument Butte interval represents a return to a gentle, shallow shelf where channel deposits are stacked in a lowstand delta plain and amalgamated into the most extensive reservoir in the central Uinta Basin. The Beluga interval represents a time of major lake expansion with fewer, less pronounced lake-level falls, resulting in isolated single-storied channel and shallow-bar sandstone deposits.

Mountain Geologist↗
USGS2014

Seismological and geodetic constraints on the 2011 M w 5.3 Trinidad, Colorado earthquake and induced deformation in the Raton Basin

The Raton Basin of southern Colorado and northern New Mexico is an actively produced hydrocarbon basin that has experienced increased seismicity since 2001, including the August 2011 M w 5.3 Trinidad normal faulting event. Following the 2011 earthquake, regional seismic observations were used to relocate 21 events, including the 2011 main shock, two foreshocks, and 13 aftershocks. Additionally, interferometric synthetic aperture radar (InSAR) observations of both the 2011 event and preevent basin deformation place constraint on the spatial kinematics of the 2011 event and localized basin subsidence due to ground water or gas withdrawal. We find that the 2011 earthquake ruptured an 8–10 km long segment of a normal fault at depths of 1.5–6.0 km within the crystalline Precambrian basement underlying the Raton Basin sedimentary rocks. The earthquake also nucleated within the crystalline basement in the vicinity of an active wastewater disposal site. The ensuing aftershock sequence demonstrated statistical properties expected for intraplate earthquakes, though the length of the 2011 earthquake is unexpectedly long for an M w 5.3 event, suggesting that wastewater disposal may have triggered a low stress drop, otherwise natural earthquake. Additionally, preevent and postevent seismicity in the Raton Basin spatially correlates to regions of subsidence observed in InSAR time series analysis. While these observations cannot discern a causal link between hydrocarbon production and seismicity, they constrain spatial relationships between active basin deformation and geological and anthropogenic features. Furthermore, the InSAR observations highlight the utility of space-based geodetic observations for monitoring and assessing anthropogenically induced and triggered deformation.

Journal of Geophysical Research B: Solid Earth↗
USGS2021

Paleozoic and Mesozoic tectonic events west of the Waterbury Dome: Results of new mapping in the western Connecticut Highlands

This field trip highlights the results of recent U.S. Geological Survey (USGS) bedrock geologic mapping in four 7.5 min quadrangles in the western Connecticut highlands near Southbury, Connecticut, USA. The rocks are broadly within what Rodgers (1985) called the Hartland and Gneiss Dome belts of the Connecticut Valley Synclinorium ( Rodgers, 1985 ; Fig. 1 ), the latter of which is now known as the Connecticut Valley–Gaspe Trough (Hibbard et al., 2006). The mapping occurred over two intervals: 2003–2005 and 2016–present. In the first, the goal was a detailed map of the early Mesozoic Pomperaug basin, which overlaps the four quadrangles. Portions of the basin had been separately mapped during the statewide 7.5 min quadrangle mapping campaign spanning the 1950s–1970s, resulting in an inaccurate depiction of the basin on the 1985 state geologic map ( Rodgers, 1985 ). A new map of the basin was proposed in part to benefit an ongoing project by the USGS Connecticut Water Science Center to determine the contributions of natural and artificial contaminants to a public water-supply well in Woodbury, Connecticut, under the National Water-Quality Assessment (NAWQA) Program ( Starn and Brown, 2007) . The NAWQA project was partially funded by the Pomperaug River Watershed Coalition, which also provided logistical support to the geologic mapping project. Mapping of the basin was also a high priority for the Connecticut State Geologist at the time (Ralph Lewis, 2002, pers. comm.). The mapping resulted in an NEIGC (New England Intercollegiate Geologic Conference) field guide ( Burton et al., 2005) and a 1:12,000-scale USGS open-file map ( Burton, 2006) and was funded by the USGS National Cooperative Geologic Mapping Program (NCGMP). The second phase of the mapping began in 2016 after the discovery of elevated levels of uranium and arsenic in domestic water wells in the igneous and metamorphic rocks that surround the sedimentary and volcanic rocks of the Pomperaug basin ( Flanagan and Brown, 2017) . Structural measurements in the surrounding crystalline rocks were made during Pomperaug basin mapping to better understand the tectonic setting, but a revision of the crystalline map units on Rodgers’ 1985 geologic map was not attempted. Nonetheless, discrepancies were noted between the new mapping and the 1985 map, particularly within the two northern quadrangles of Woodbury and Roxbury, which were originally mapped by Gates (1954) and Gates (1959) , respectively. Based on these discrepancies, a new NCGMP project was proposed to remap the Woodbury and Roxbury 7.5 min quadrangles, commencing in the fall of 2016. The expected USGS product will be a two-quadrangle, 1:24,000-scale Scientific Investigations Map (SIM). This field guide is not meant as a comprehensive review of all of the geologic research done in this area of Connecticut; rather, it looks at previous bedrock geologic mapping from the perspective of new and recent mapping in the four-quadrangle area and discusses the structural, stratigraphic, and nomenclatural revisions necessary for the next revision of the state geologic map.

Connecticut↗
USGS1994

Geologic map of the Venezuela part of the Puerto Ayacucho 2 degrees x 3 degrees Quadrangle, Amazonas Federal Territory, Venezuela

This map is one of a series of 1:500,000-scale maps that, along with several other products, stems from a cooperative agreement between the U.S. Geological Survey (USGS) and the Corporacion Venezolana de Guayana, Tecnica Minera, C.A. (TECMIN), a Venezuelan Government-owned mining and mineral exploration company. The agreement covered cooperative work carried out in the Precambrian Shield of southern Venezuela during 1987-1991 and included a geologic and mineral resource inventory, technology transfer, and scientific training (Wynn and others, in press). The Precambrian Guayana Shield (Escudo de Guyana, not to be confused with the neighboring country of Guyana) includes some of the oldest known rocks in the world (Mendoza, 1977) and also covers parts of neighboring Guyana, Surinam, French Guiana, Columbia, and Brazil. In Venezuela, it underlies most of Bolivar state and all of the Amazonas Federal Territory (see index map).

Puerto Ayacucho↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS1956

Summary of reconnaissance for radioactive deposits in Alaska, 1945-1954, and an appraisal of Alaskan uranium possibilities

In the period 1945-1954 over 100 investigations for radioactive source materials were made in Alaska. The nature of these investigations ranged from field examinations of individual prospects or the laboratory analysis of significantly radioactive samples submitted by prospectors to reconnaissance studies of large districts. In this period no deposits of uranium or thorium that would warrant commercial exploitation were discovered. The investigations, however, disclosed that radioactive materials occur in widely scattered areas of Alaska and in widely diverse environments. Many igneous rocks throughout Alaska are weakly radioactive because of uranium- and thorium-bearing accessory minerals, such as allanite, apatite, monazite, sphene, xenotime, and zircon; more rarely the radioactivity of these rocks is due to thorianite or thorite and their uranoan varieties. The felsic rocks, for example, granites and syenites, are generally more radioactive than the mafic igneous rocks. Pegmatites, locally, have also proved to be radioactive, but they have little commercial significance. No primary uranium oxide minerals have been found yet in Alaskan vein deposits, except, perhaps, for a mineral tentatively identified as pitchblende in the Hyder district of southeastern Alaska. However, certain occurrences of secondary uranium minerals, chiefly those of the uranite group, on the Seward Peninsula, in the Russian Mountains, and in the vicinity of Kodiak suggest that pitchblende-type ores may occur at depth beneath zones of alteration. Thorite-bearing veins have been discovered on Prince of Wales Island in southeastern Alaska. Although no deposits or carnotite-type minerals have been found in Alaska, several samples containing such minerals have been submitted by Alaskan prospectors. Efforts to locate the deposits from which these minerals were obtained have been unsuccessful, but review of available geologic data suggests that several Alaskan areas are potentially favorable for carnotite-type deposits. The chief of these areas is the Alaska Peninsula-Cook Inlet area which encompasses most of the reported occurrences of the prospectors' carnotite-type samples. Alaska is also potentially favorable for the occurrence of large bodies of the very low-grade uraniferous sedimentary rocks, such as phosphorites and black shales. This type of deposit, however, has not received much study because of the emphasis on the search for bonanza-type high-grade ores. Uraniferous phosphorites similar to those of Idaho, Montana, and Wyoming occur in northern Alaska on the north flank of the Brooks Range; black shales comparable to the uraniferous shales of the Chattanooga formation of southeastern United States have been noted along the Yukon River near the international boundary. Placer deposits in Alaska have some small potential for the production of the radioactive elements as byproducts of gold- and tin-placer mining. the placer area believed to have the relatively greatest potential in Alaska lies in the Kahiltna River valley where concentrates are known to contain such commercial minerals as ilmenite, cassiterite, platinum, and gold in addition to uranothorianite and monazite. The possibilities of the natural fluids--water and petroleum--have not yet been tested in Alaska to any great extent. Studies of fluids are in progress to determine whether they may be used to discover and define areas potentially favorable for the occurrence of uraniferous lodes.

Alaska↗
USGS2015

California State Waters Map Series — Offshore of Salt Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Salt Point map area is located in northern California, about 110 km north of San Francisco and 50 km south of Point Arena. The map area includes three California Marine Protected Areas: the southern portion of the Stewarts Point State Marine Reserve, the Salt Point State Marine Conservation Area, and the Gerstle Cove State Marine Reserve. The coast and shoreline are rugged and scenic, characterized by rocky promontories, steep bluffs capped by bare to forested marine terraces, kelp-rich coves, and nearshore rocks and pinnacles. The largely undeveloped onshore part of the map area is used primarily for grazing and recreation. U.S. Highway 1 extends along the coast through the map area, passing through Salt Point State Park, Kruse Rhododendron State Natural Reserve, and Stillwater Cove Regional Park. Sandy beaches are uncommon, present only in relatively protected coves. The seafloor in the map area extends from the shoreline to water depths of about 90 to 100 m. The nearshore to inner shelf area (to water depths of about 50 to 60 m) typically dips seaward about 1.0° to 1.5° and is underlain by bedrock and sand-sized to coarser grained sediment. The midshelf, underlain predominantly by muddy sediments, slopes more gently (less than 0.5°). Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Offshore of Salt Point map area was emergent and the shoreline was about 20 km west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. The onshore part of the map area is cut by the northwest-striking San Andreas Fault—the right-lateral transform boundary between the North American and Pacific tectonic plates with an estimated slip rate of about 17 to 25 mm/yr in this area. The region between Fort Ross and Point Arena, west of the San Andreas Fault, is the known as the “Gualala Block” on the basis of its distinctive geology. The Gualala Block consists of a thick, discontinuous Upper Cretaceous to Miocene stratigraphic section, however, only the submarine fan deposits of the Paleocene and Eocene German Rancho Formation are exposed along the coast in the Offshore of Salt Point map area. The German Rancho Formation also forms all of the rugged seafloor bedrock outcrops in the map area. The western boundary of the Gualala Block lies 3 to 5 km offshore, perhaps at the shore-parallel Gualala Fault. High-resolution seismic-reflection data reveal shallow folding and faulting in inferred upper Pleistocene strata along the Gualala Fault trend, suggesting this structure is now or has been recently active. The last ground rupture in the map area occurred during the devastating great 1906 California earthquake (M7.8, 4/18/1906), thought to have nucleated on the San Andreas Fault about 100 kilometers to the south offshore of San Francisco. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Throughout the year, this part of the central California coast is exposed to four wave climate regimes: the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, with wave heights at offshore buoys ranging from 2 to 10 m and wave periods ranging from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore Central America. Characteristically, these swells have smaller wave heights (0.3 to 3 m) and similarly long periods (range 10 to 25 s). Northwest wind waves affect the coast throughout the year, while local wind waves are most common from October to April. These two wind-wave regimes typically have wave heights of 1 to 4 m and short periods (3 to 10 s). Potential marine benthic habitats in the Offshore of Salt Point map area include unconsolidated continental shelf sediments, mixed continental shelf substrate, and hard continental shelf substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species.

California↗
USGS2010

A unique approach to estimating lateral anisotropy in complex geohydrologic environments

Aquifers in fractured rock or karstic settings are likely to have anisotropic transmissivity distributions. Aquifer tests that are performed in these settings also are frequently affected by leakage from adjacent confining units. Finite-difference models such as MODFLOW are convenient tools for estimating the hydraulic characteristics of the stressed aquifer and adjacent confining units but are poor tools for the estimation of lateral anisotropy. This limitation of finite-difference methods can be overcome by application of the spin method, a technique whereby the positions of the observation wells are rotated about the production well to estimate anisotropy and orientation. Formal parameter estimation is necessary to analyze aquifer tests because of the number of parameters that are estimated. As a test, transmissivity, anisotropy, and orientation were successfully estimated for a simple hypothetical problem with known properties. The technique also was applied to estimate hydraulic properties of the Santee Limestone/Black Mingo (SL/BM) aquifer and a leaky confining unit beneath Charleston, South Carolina. A 9-day aquifer test with an average discharge of 6441/min was analyzed numerically. Drawdowns in the SL/BM aquifer and confining unit were simulated with a 12-layer MODFLOW model that was discretized into 81 rows of 81 columns. Simulated drawdowns at seven observation wells that ranged from 23 to 2700 m from the production well were matched to measured drawdowns. Transmissivity estimated along the minor axis ranged from 10 to 15 m 2 /day and along the major axis ranged from 80 to 10Om 2 /day. The major axis of transmissivity was oriented along compass heading 116° (degrees clockwise from north), which agrees with geologic interpretations. Vertical hydraulic conductivity and specific storage estimates for the overlying confining unit were 4 x 10 -5 m/day and 2 x 10 -4 1/m, respectively.

South Carolina↗
USGS1969

Recent surface movements in the Baldwin Hills, Los Angeles County, California

The Baldwin Hills are located in the northwest part of the densely populated Los Angeles basin. They comprise one of several groups of isolated hills that extend along the northwest-trending Newport-Inglewood zone of folds and faults, a structural lineament identified with a series of very productive oil fields. In addition to being the site of the Inglewood oil field, these hills are the site of surface deformation that has been monitored for over 35 years. This record of deformation, which includes differential subsidence, horizontal displacements, and surface rupturing, forms one of the best documented examples of oilfield-associated surface deformation yet recognized. The deformation is described in detail, analyzed as to cause(s), and finally attributed largely or essentially entirely to the exploitation of the spatially-associated Inglewood oil field. The Baldwin Hills are underlain by gently to moderately arched and conspicuously faulted Cenozoic sedimentary and volcanic rocks that overlie crystalline basement rocks at a depth of more than 10,000 feet. The Inglewood fault, a part of the northwest-trending Newport-Inglewood zone, diagonally transects the hills. Right-lateral displacements of 3,000-4,000 feet since middle or late Pliocene time and 1,500-2,000 feet during Quaternary time are indicated by offset structural and physio-graphic features; indications of vertical separations of up to about 200 feet during late Quaternary time occur locally. Evidence of continuing deformation includes recognized seismicity and regional elevation changes. The M5-5 1/2 Inglewood earthquake of 1920, the largest local earthquake of record, is believed to have originated immediately southeast of the Baldwin Hills; it was apparently unassociated with surficial fault displacements. Leveling in and around the west and central Los Angeles basin has shown that lowland stations have been consistently subsiding, whereas foothill stations commonly have been rising. Several seemingly persistent basins of differential subsidence and a zone of positive movement, roughly coincident with the Newport-Inglewood zone, have also been identified in the northwest part of the basin. A prominent, elliptically-shaped, northwest-trending subsidence bowl encompassing the northwest part of the Baldwin Hills, has been defined by repeated level circuits. Partial reconstruction of selected level circuits with respect to a common, relatively stable control point (Hollywood E-11), located on the edge of the subsidence bowl, has permitted evaluation of the subsidence since 1910 and 1911 at two points near the center of the bowl. Thus bench mark PBM 67 is estimated to have subsided approximately 4.324 feet between June 1910 and February 1963; and bench mark PBM 68 (the only bench mark within the subsidence bowl that was leveled prior to 1926 and has been repeatedly leveled since) subsided 3.846 feet between November 1911 and June 1962. Analysis of the available data indicates little if any elevation change at PBM 68 (or elsewhere throughout the Baldwin Hills-Inglewood area) associated with the Inglewood earthquake of 1920. Maximum subsidence of PBM 122 (which has remained very close to the center of subsidence since at . least 1950) between 1911 and 1963 is calculated to have been 5.67 feet. Horizontal displacements (with respect to a north-south base line about 3 miles east of the hills) of six triangulation points within the subsidence bowl have been measured for various periods between 1934 and 1963. Displacements have been generally toward the center of subsidence and almost precisely perpendicular to the immediately adjacent isobases of equal elevation change. Maximum movement has been recorded at triangulation point Baldwin Aux, which was displaced 2.21 feet between 1934 and 1961; horizontal displacements of three additional points ranged from 0.95 foot to 1.85 feet between 1936 and 1961. Displacements of 0.10-0.29 foot were recorded at all six monuments during the period 1961-1963. "Earth cracks" and surficial fault displacements were recognized in the Baldwin Hills at least as early as 1957. The cracks are relatively straight, generally continuous fractures confined to the structural block east of the Inglewood fault; they are concentrated in two areas centering on (1) the Baldwin Hills Reservoir and (2) the Stocker Street-LaBrea Avenue-Overhill Drive intersection. The cracks trend north to north-northeast and are nearly everywhere parallel to or coincident with minor faults and joints, and are generally orthogonal to radii emanating from the center of subsidence. Differential movement along the cracks has been almost entirely dip slip along steep to nearly vertical surfaces, and generally down-dropped toward the center of subsidence. Cumulative displacements have been as much as 6 or 7 inches. Rates of displacement have ranged widely, and the movement has generally occurred as creep or very small discrete jumps. A probable exception is the several inches of differential movement that is believed to have occurred along a crack through the floor of the Baldwin Hills Reservoir on or about December 14, 1963. The contemporary surface movements are attributable to one or more of the following phenomena: (1). exploitation of the Inglewood oil field; (2) changes in the ground-water regimen; (3) compaction of sedimentary materials in response to surface loading; (4) tectonic activity. The following considerations indicate that the differential subsidence is attributable largely or entirely to exploitation of the underlying Inglewood oil field: (1) the coincidence of the centers of the oil field, the producing structure, and the subsidence bowl; (2) the general correspondence between the pattern of subsidence and the outlines of the oil field; (3) the approximate coincidence between the initiation of production and the initiation of subsidence; (4) the generally linear relations between various measures of subsidence and liquid production from both the field as a whole and the exceptionally prolific Vickers zone in particular; (5) the sharp deceleration of subsidence in the eastern block of the field coincident with the initiation of full-scale water flooding there; (6) the many examples of oil fields In which both spatial and temporal associations between production and subsidence are recognized; (7) the many similarities of the subsidence-production relations in the Inglewood field to those in the Wilmington field, where the subsidence has been authoritatively attributed to oilfield operations; (8) the theoretical relation between subsidence or a tendency toward subsidence and increased effective pressure associated with underground fluid extraction. Consideration of six possible explanations for the increasing rather than decreasing or constant rate of subsidence with respect to reservoir fluid pressure decline suggests that measured or calculated down-hole reservoir fluid pressure decline is non-representative of average or real fluid pressure decline away from producing wells. The near-linear relations between net-liquid production and subsidence are explained through analogy with a tightly confined artesian system of infinite areal extent, where production must derive from liquid expansion and/or reservoir compaction. Test data from compaction studies in two other oil fields yield estimates of ultimate compaction of the Vickers zone resulting from a total loss of fluid pressure; these estimates range over an order of magnitude. The best estimate, based on these data and considerations of late Cenozoic history in the Baldwin Hills area, is about 10 feet. The centripetally-directed horizontal movements are considered attributable to exploitation of the Inglewood oil field on the basis of: (1) their well-defined symmetrical and geometrical association with the differential subsidence; (2) the similarities between these associations and those developed in and around other subsiding oil fields; and (3) the mechanical compatibility of these movements with subsidence induced by the extraction of subsurface materials. The earth cracks and surficial fault displacements are considered largely or entirely attributable to the exploitation of the Inglewood oil field on the basis of: (1) their spatial and temporal relations to both oil-field operations and the differential subsidence; (2) the similarities of these cracks and displacements to those generated in and around other oil fields and areas of subsurface materials extraction; and (3) surface strain patterns predicted from the measured vertical and horizontal surface movements. The cracks and displacements can i)e explained by an exploitation-based, elastic-rebound model which requires elastic compression of the sedimentary section in response to compaction-induced downdrag within those blocks around the periphery of the subsidence bowl. The measured displacements have been about one-quarter to one-half those predicted for a purely elastic system. Analysis of: (1) the history of ground-water extraction within and around the Baldwin Hills; and (2) subsidence associated with water-level declines in sediments comparable with those in the Baldwin Hills, indicate that the surface movements can be no more than incidentally attributed to changes in ground-water conditions. Similarly, analysis of the history of natural and artificial changes in surface loading indicate that these movements are generally unassociated with changes in surface loading conditions. Considerations of local geologic history and various tectonic associations indicate that it is very unlikely that the differential subsidence and horizontal movements are due to tectonic downwarping. There exists a far stronger prima facie argument for tectonic involvement in the earth cracking and associated fault displacements. This argument is disputed by; (1) the spatial and temporal relations of the earth cracks to, and their mechanical compatibility with, the nontectonic differential subsidence; (2) the absence of displacements on the Inglewood fault in conjunction with those along the conjugate earth cracks; (3) the probability that purely tectonic displaceMents would be characterized by oblique or strike slip; and (4) the absence of any clear temporal relation between crack growth and local seismicity, However, because as much as 10 percent of the local isobase gradient may be unexplained' by oil-field exploitation, a small fraction of this gradient, and thus the displacements among the southern group of cracks, may be attributable to tectonic activity. This fraction should have been insignificant in the presence of the strain pattern produced by nontectonic compaction of the underlying oil measures. Because nearly all of the observed and measured surface movements can be fully explained as the products of oil-field operations, yet can be no more than incidentally attributed to changes in ground-water conditions, surface loading, or tectonic activity, we conclude that these movements are attributable largely or essentially entirely to the exploitation of the Inglewood oil field.

California↗
USGS2015

California State Waters Map Series — Offshore of Pacifica, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Pacifica map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 10 kilometers south of the Golden Gate. The map area extends from Daly City, through Pacifica, to the small coastal community of Montara. Much of the coastal zone is managed by either the State of California or local governments, including Thornton Beach State Park, Mussel Rock Park, Pacifica State Beach, Gray Whale Cove State Beach, and Montara State Beach. The major structure in the transform boundary between the Pacific and North American tectonic plates, the northwest-striking San Andreas Fault, cuts through the map area, crossing the shoreline near Mussel Rock before continuing offshore. The epicenter of the great 1906 California earthquake is located on the offshore part of the San Andreas Fault Zone a few kilometers north of the map area. The map area is located at the northwest end of the Santa Cruz Mountains, much of which has been uplifted in the last 400,000 years. Southwest of the San Andreas Fault Zone, this uplift has resulted in a highly variable coastal morphology characterized by long, narrow beaches bounded by steep cliffs or marine terraces, small pocket beaches surrounded by rocky promontories, and steep, narrow coastal watersheds. Geologic units mapped along the coast include sedimentary, volcanic, and metamorphic rocks of the Franciscan Complex; Cretaceous granitic rocks; Tertiary sedimentary rocks; and Quaternary coastal marine terraces, deep-seated and shallow landslides, and beach and sand dune deposits, all of which contribute sediment to the coastal zone. In contrast to the more rural coastal zone to the south, the highly urbanized coastal zone north of Mussel Rock and the San Andreas Fault Zone is characterized by a narrow beach bounded by steep, 50- to 120-m-high cliffs made up of sand, silt, and clay of the Pliocene and Pleistocene Merced Formation, the source of numerous landslides. Two large landslides along “Northridge bluff” in 2003 and 2007 had estimated volumes of 305,800 to 382,300 m 3 and 120,800 m 3 , respectively. Coastal landslides also are an issue to the south between Mussel Rock and Mori Point, even as bluffs diminish in height and pocket beaches transition to a more continuous strand bounded by Quaternary-age dunes and low-lying marine terraces. Mori Point, a coastal promontory in Pacifica underlain by rocks of the Franciscan Complex, rises abruptly to a height of 90 m from the shoreline. Pocket beaches characterize the shoreline from Mori Point south to Shelter Cove, the largest of which, Pacifica State Beach, is at the mouth of San Pedro Creek. The coastal zone south of Pacifica, which stretches from Shelter Cove to Montara and includes Point San Pedro and Devils Slide, lies at the northwest end of San Pedro Mountain (underlain largely by early Tertiary sedimentary rocks) and Montara Mountain (underlain by Cretaceous granitic rocks). Elevations at Montara Mountain exceed 500 m just 4 km from the shoreline, and steep cliffs along the coast are as high as 275 m. This rugged terrain results in numerous rocky promontories, small pocket beaches, and large coastal landslides. Slope failures along Devils Slide are notorious for closing California Highway 1, creating such a large and persistent problem that the California Department of Transportation has bypassed this coastal section by tunneling through San Pedro Mountain; the tunnel was completed and the new section of highway opened in 2013. Coastal relief diminishes at Montara in the southernmost part of the map area, where the shoreline is bounded by 10- to 20-m-high marine terraces. Throughout the year, this part of the coast is exposed to the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, having wave heights that range from 2 to 10 m at offshore buoys and wave periods that range from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore of Central America. Characteristically, these swells have smaller wave heights (0.3–3 m) but similarly long wave periods (10–25 s). Local wind waves are most common from October to April, whereas northwest wind waves affect the coast throughout the year. These two wind-wave regimes typically have wave heights of 1 to 4 m and short wave periods (3–10 s). Unlike many other parts of the California coast where sediment is supplied primarily from river and (or) stream runoff, sediment supply to the offshore along this part of northern California is a complex mixture of (1) sand transported from the coast north of the Golden Gate, (2) sediment transported to the coast through the San Francisco Bay via the Golden Gate and then dispersed over the adjacent ebb-tide delta, and (3) varying volumes of sediment eroded from adjacent steep coastal bluffs caused by wave-induced landslides and other erosional events. Additionally, since the 1980s, coastal erosion south of the Golden Gate has increased substantially between Ocean Beach (on the west coast of San Francisco, about 5 km north of the map area) and Point San Pedro. The combined sediment load is transported southward along the coast by the generally north-to-south alongshore current, which develops in response to the energetic winter-wave climate associated with the north Pacific swell. Overall, beaches in the map area have a long-term erosional trend, except near Mussel Rock where a long-term accretionary trend may reflect increased sediment supply from landslides. Beach-front riprap armoring and retaining walls are used locally to protect the shoreline from seasonal storm waves, most notably between Mussel Rock and Mori Point. The continental shelf in the map area is about 40 km wide, with water depths at the shelf break that range from about 80 to 120 m. Within California’s State Waters, the midshelf to inner shelf areas are characterized by a relatively flat, shallow (water depths of as much as 44 m) seafloor that dips gently (about 0.2° to 0.3°) westward. The seafloor is composed primarily of unconsolidated Holocene sediment (marine deposits), as well as some nearshore bedrock outcrops that consist primarily of rocks of the Tertiary Purisima Formation and also Cretaceous plutonic rocks (granite or granodiorite).

California↗
USGS2006

Hydrogeology, Aquifer Geochemistry, and Ground-Water Quality in Morgan County, West Virginia

Private and public wells throughout Morgan County, W. Va., were tested to determine aquifer hydraulic, geochemical, and water-quality characteristics. The entire study area is located in the Valley and Ridge Physiographic Province, a region of complex geologic structure and lithology. Aquifers in the study area are characterized by thin to thick bedded formations with interbedding among the various limestones, shales, sandstones, and siltstones that are folded into a series of steeply dipping north-south trending anticlines and synclines. Zones of ground-water production typically consist of one to two fracture sets, with little to no production from unfractured bedrock matrix. Measurements of transmissivity range from 2 to 1,490 feet squared per day, with the larger transmissivities occurring near bedding contacts and in zones with cross-faulting or jointing. Ground water flows from recharge areas in the uplands to local drainages and to deeper flow systems that appear to be controlled by regional geologic structure. The overall flow direction is from south to north within the study area. Ground water within the study area is predominantly a calcium-bicarbonate type water reflecting contact with carbonate rocks. Sodium-bicarbonate and calcium-magnesium-sulfate end-members also exist, with many samples exhibiting mixing, which may be the result of flow between the differing rock types or within units containing both carbonate rocks and shales. Values of water-quality characteristics that were greater than U.S. Environmental Protection Agency drinking-water standards included radon-222, pH, turbidity, iron, manganese, aluminum, and total- and fecal-coliform and Escherichia coli (E. coli) bacteria. Concentrations of radon-222 were detected in all samples from all units, with the largest concentrations (1,330 and 2,170 picocuries per liter) from the Clinton Formation.

Scientific Investigations Report↗
USGS1952

Carnotite resources of Outlaw Mesa, Mesa County, Colorado

The U.S. Geological Survey explored Outlaw Mesa for carnotite deposits from 1949 through 1951 with 1,302 diamond-drill holes that totaled 222,150 feet. Total production from Outlaw Mesa from 1914 through 1951 was about 30,000 short tons of carnotite ore, having an estimated grade of about 0.40 percent U3O8 and 1.7 percent V205. The known carnotite deposits are in a number of sandstone lenses in the upper part of the Salt Wash sandstone member of the Jurassic Morrison formation. The deposits are mainly impregnations of sandstone by carnotite and vanadium-bearing clay minerals. Commonly, the deposits are irregular tabular layers or pod-like or crescentic masses ("rolls") connected by thin layers of mineralized rock. The deposits and rolls have a dominant northeasterly trend. Useful criteria for recognizing-sandstone that might contain mineralized rock are: (1) thick, light-brown sandstone, (2) gray mudstone at the base of and in this sandstone, and (3) abundant carbonaceous material. The indicated and inferred reserves of carnotite-bearing material, and the pounds of contained U308 and V205 are summarized in table 1. Potential reserves, whose existence is based on geologic evidence alone, are estimated to total about 80,000 short tones, averaging about 0.35 percent U308 and 1.5percent V205. No further exploration by the Geological Survey is planned; however, additional drilling by private operators is recommended, particularly in ground underlain by mineralized rock.

Colorado↗
USGS1967

Geology and ground water of the Savannah River Plant and vicinity, South Carolina

The area described in this report covers approximately 2,600 square miles in west-central South Carolina and includes the site of the Savannah River Plant, a major production facility of the U.S. Atomic Energy Commission. The climate, surface drainage, and land forms of the study area are typical of the southern part of the Atlantic Coastal Plain. Precipitation is normally abundant and fairly evenly distributed throughout the year, and the mean annual temperature is moderately warm (64?F). The major streams that drain the area (the Savannah, Salkehatchie, and Edisto Rivers) have low gradients and flow in a southeasterly direction toward the Atlantic Ocean. Surface features of the area include narrow, flat-bottomed, steep-sided valleys and broad gently rolling interfluvial areas. Those parts of the Coastal Plain included within the report area can be subdivided into the Aiken Plateau, the Congaree Sandhills, and the Coastal Terraces. The area is underlain by a sequence of unconsolidated and partly consolidated sediments of Late Cretaceous, Tertiary, and Quaternary age. The unconsolidated sediments were deposited unconformably on a basement of igneous and metamorphic rocks of Precambrian and Paleozoic age and sedimentary rocks of Triassic age. The basement rocks are similar to the granite-diorite complex of the Charlotte Belt, the metamorphosed rocks of the Carolina Slate Belt, and the consolidated sediments of the Newark Group. The unconsolidated sediments strike about N. 60 ? E. and dip 6-20 feet per mile to the southeast. They form a wedge-shaped mass that increases in thickness toward the southeast to slightly more than 1,200 feet in the vicinity of Allendale, S.C., on the southeast or downdip side of the study area. The oldest or lowermost unconsolidated sedimentary unit, the Tuscaloosa Formation of Late Cretaceous age, is overlain in the subsurface by beds that are also probably Late Cretaceous in age and that herein are named the Ellenton Formation. The Upper Cretaceous deposits are, in turn, overlain by the, McBean Formation and the Congaree(?) Formation of middle Eocene age, the Barnwell Formation of late Eocene age, the Hawthorn Formation of early and middle Miocene age, and by fluvial and marine(?) terrace deposits of Pliocene(?), Pleistocene, and Recent age. In the mapped area, the Congaree(?) Formation includes undifferentiated rocks (mostly Congaree and Barnwell Formations and some Mcbean outliers). (See map explanation.) Structurally, the Upper Cretaceous sediments are overlapped to the northwest by Tertiary deposits. A preliminary geologic map of the general area is included in the report. The principal aquifer in the area is composed of the beds of medium to coarse sand and gravel contained in the Tuscaloosa and Ellenton Formations. Subordinate aquifers include deposits of sand and limestone of Tertiary and Quaternary age. The ground water in the principal aquifer occurs under water-table conditions in the outcrop area of the Tuscaloosa Formation in the northern and western parts of the study area, but it is under artesian pressure downdip in the southern and eastern parts of the study area. Contours drawn on the piezometric surface of the water in the principal aquifer indicate that water is recharged to the aquifer mainly by leakage through the overlying Tertiary formations. Likewise, the piezometric contours show that the outcrop area of the Tuscaloosa Formation functions chiefly as an area of discharge. Doubtless, water is also discharged from the aquifer by moving downdip to areas near the coast where the prevailing hydraulic gradient may favor the upward leakage of water through the upper confining beds. The hydraulic properties of the principal aquifer were determined by a series of pumping tests. The results indicate that the aquifer is highly productive and could supply 15 million gallons per day in the vicinity of the Savannah River Plant without exceeding the available drawdown.

South Carolina↗
USGS1999

Composition and origin of Early Cambrian Tiantaishan phosphorite-Mn carbonate ores, Shaanxi Province, China

The Tiantaishan phosphorite-Mn carbonate ores occur in the Early Cambrian Tananpo Formation in complexly folded and faulted rocks located in southern Shaanxi Province. About 65 x 106 tonnes of 17% P2O5 ore reserves exist and Mn-ore reserves are about 8.3 x 106 tonnes of +18% Mn. The stratigraphic sequence in ascending order consists of black phyllite, black to gray phosphorite ore, black phyllite, rhodochrostone ore, Mn mixed-carbonates, and dolostone. Data are presented from microprobe mineral chemistry, whole-rock chemistry, stable isotopes of carbonates, X-ray mineralogy, petrographic and SEM observations, and statistical analysis of chemical data. The dominant ore-forming minerals are hydroxy- and carbonate fluorapatite and Ca rhodochrosite, with Mg kutnahorite and dolomite comprising the Mn mixed-carbonate section. Pyrite occurs in all rock types and alabandite (MnS) occurs throughout the rhodochrostone section. The mean P2O5 content of phosphorite is 31% and argillaceous phosphorite is 16%, while the mean MnO content of rhodochrostone ore is 37%. Phosphorite ores are massive, spheroidal, laminated, and banded, while rhodochrostone ores have oolitic, spheroidal, and granular fabrics. The most distinguishing characteristics of the ores are high total organic carbon (TOC) contents (mean 8.4%) in the phosphorite and high P2O5 contents (mean 2.7%) in the rhodochrostone ore. The atypically high TOC contents in the Tiantaishan phosphorite probably result from very strong productivity leading to high sedimentation rates accompanied by weak reworking of sediments; poor utilization of the organic matter by bacteria; and/or partial replacement of bacterial or algal mats by the apatite. The depositional setting of the ores was the margin of an epicontinental seaway created as a direct consequence of global processes that included break-up of a supercontinent, formation of narrow seaways, creation of extensive continental shelves, overturn of stagnant, metal-rich deep-ocean waters, and marine transgression. Water depth increased from deposition of the black phyllite sequence through deposition of the Mn mixed-carbonate sequence, then shallowed again during deposition of the overlying dolostone sequence. Bottom waters were mostly dysoxic to suboxic, but fluctuated from oxic to anoxic. Productivity was high during deposition of the black phyllite sequence, increased during precipitation of phosphorite, and then decreased to moderate levels during precipitation of rhodochrostone ores. Biosilica contributions occur in each lithology, but are greatest in rhodochrostone. Changes in sedimentation were determined by changes in water depth, productivity, upwelling, sea-level change, and ventilation of the depositional basin. The source of the phosphorus was organic matter produced in great quantities during deposition of the black phyllite and phosphorite sequences in a zone of coastal upwelling. Organic matter accumulation was rapid. Globally, Mn was supplied by overturn of stagnant, metal-rich deep-ocean waters, which were redistributed to areas of coastal upwelling and seaways; that process may have been initiated by latest Proterozoic glaciations which would have promoted density stratification and accumulation and storage of metals. Regionally, Mn was supplied by terrigenous input into the shallow seaway and hydrothermal input into the deeper water parts of that seaway. Locally, Mn sources included leaching and transport of metals from the sediment column. Manganese was stored locally in low-oxygen (not anoxic) seawater prior to Mn-ore formation. The source of the carbon in the Mn carbonates and dolostones was predominantly seawater bicarbonate and secondarily CO2 derived from the oxidation of organic matter in the bacterially mediated diagenetic zone of sulfate reduction.

Ore Geology Reviews↗
USGS1990

Occurrence and geochemistry of natural gases, Piceance Basin, northwest Colorado

The Piceance basin is a hydrocarbon-rich province that has natural gas production from reservoirs ranging in age from Late Jurassic to Eocene and large undeveloped resources of natural gas in coal beds and tight sandstone reservoirs of Cretaceous age. Gases from all producing intervals are of predominantly thermal origin and become isotopically heavier (delta isotope{13}C[1]: -51.3 to -29.1 o/oo) and chemically drier (C[1]/C[1-5]: 0.26 to 1.00) with increasing thermal maturity of reservoirs (R[o]: 0.45 to 2.40%) over a depth range of 1100 to 11,702 ft (335-3567 m). Scatter in trend is attributed to source rock differences and considerable vertical and lateral migration. Based on chemical and isotopic composition, three major types of gases can be distinguished: those generated from mixed type II and III kerogens, those from dispersed type III kerogen, and those from coal. Gases generated from mixed type II and III kerogens are produced from the Upper Jurassic Morrison Formation, the Lower Cretaceous Cedar Mountain Formation, the Upper Cretaceous Dakota Sandstone, the Upper Cretaceous Mancos "B" producing interval, and marginal marine sandstones of the Upper Cretaceous Iles producing interval. These gases are associated with minor amounts of oil and probably were generated from kerogen in the marine Mancos Shale. Gases generated from dispersed type III kerogen are produced from nonmarine sandstones of the Upper Cretaceous Williams Fork producing inter al and from thermally immature reservoirs in the overlying Paleocene and Eocene Fort Union and Wasatch Formations. These nonassociated gases contain large amounts of CO[2] and probably were generated from carbonaceous shales in the Williams Fork producing interval. Their presence in immature Fort Union and Wasatch reservoirs implies considerable vertical migration. The third type of gas is methane rich, is produced by devolatilization of humic coal, and is generally in coal beds of the Cameo-Fairfield zone of the Williams Fork producing interval. These gases are not the major source for adjacent sandstone reservoirs. A fourth, distinct type of isotopically light thermogenic gas occurs in immature reservoirs of the Eocene Green River Formation. This gas is inferred to have migrated from u identified deeper, more mature source rocks.

Colorado↗
USGS1985

Petroleum geology and resources of northeastern Mexico

Petroleum deposits (primarily gas) in northeastern Mexico occur in two main basins, the Tertiary Burgos basin and the Mesozoic Sabinas basin. About 90 gas fields are present in the Burgos basin, which has undergone active exploration for the past 30-40 years. Production in this basin is from Oligocene and Eocene nearshore marine and deltaic sandstone reservoirs. Most of the fields are small to medium in size on faulted anticlinal or domal structures, some of which may be related to deep-seated salt intrusion. Cumulative production from these fields is about 4 trillion cubic feet gas and 100 million barrels condensate and oil. Since 1975, about 10 gas fields, some with large production rates, have been discovered in Cretaceous carbonate and Jurassic sandstone reservoirs in the Sabinas basin and adjacent Burro-Picachos platform areas. The Sabinas basin, which is in the early stages of exploration and development, may have potential for very large gas reserves. The Sabinas basin is oriented northwesterly with a large number of elongate northwest- or west-trending asymmetric and overturned Laramide anticlines, most of which-are faulted. Some of the structures may be related to movement of Jurassic salt or gypsum. Lower Cretaceous and in some cases Jurassic rocks are exposed in the centers of the larger anticlines, and Upper Cretaceous rocks are exposed in much of the remainder of the basin. A thick section of Upper Cretaceous clastic rocks is partly exposed in tightly folded and thrust-faulted structures of the west-east oriented, deeply subsided Parras basin, which lies south of the Sabinas basin and north of the Sierra Madre Oriental fold and thrust belt south and west of Monterrey. The sedimentary cover of Cretaceous and Jurassic rocks in the Sabinas and Parras basins ranges from about 1,550 m (5,000 ft) to 9,000 m (30,000 ft) in thickness. Upper Jurassic rocks are composed of carbonate and dark organic shaly or sandy beds underlain by an unknown thickness of Late Jurassic and older redbed clastics and evaporites, including halite. Lower Cretaceous rocks are mainly platform carbonate and fine clastic beds with some evaporites (gypsum or anhydrite) deposited in two main rudist reef-bearing carbonate cycles. Upper Cretaceous rocks are mainly continental and marine clastic beds related to early development of the Laramide orogeny. This Upper Cretaceous sequence contains a marine shale and deltaic clastic complex as much as 6,000 m (20,000 ft) or more thick in the Parras basin, which grades northward and eastward to open marine, fine clastic beds. The Burgos basin, which is an extension of the Rio Grande embayment of the western Gulf of Mexico basin province, contains an eastward-thickening wedge of Tertiary continental and marine clastics. These beds are about 1,550 to 3,000 m (5,000-10,000 ft) thick in the outcrop belt on the west side of the basin and thicken to more than 16,000 m (50,000 ft) near the Gulf Coast.

Circular↗
USGS1948

Tests and researches on building stones

In 1941, the "Association Francaise de Normalisation" (French Association of Standardization) decided to create a Commission for the purpose of writing out a standard for building stones. When this Commission met under the chairmanship of Mr. Pol Abraham, Architect, they realized how far behind was our precise technical knowledge of this kind of material, and found the necessity of determining exactly the testing and acceptance methods. They expressed the wish that a careful study of the subject be entrusted to a specialized laboratory. This wish was received by the Ministry of Production, which, after an agreement with the competent organizing committees, entrusted our laboratory with this work. The main object was to establish the difficulty of stone-cutting in order to permit a classification of the stones according to the difficulty met when working them up into shape, to refer the other technical properties of the stones to this property, and finally to see what relation exists between the figures obtained. To this end nine stones were chosen by the Commission, from the hardest to the softest: Hauteville, Comblanchien, spotted Larrys, yellow Massangis rock, Euville rock, fine-grained Lavoux, soft Maximin rock, "banc royal" Mery, and "bane royal" Billy. Each type of stone included three large blocks of 0.75 by 0.75 by 0.5 meters to be dressed by hand by specialized workmen, the difficulty of stone-cutting being determined by the time spent for the dressing and preparation of the surfaces. After this operation, detail of which will be given later, we had an important quantity of material which we were to use to the best advantage. I thought that it would be interesting to determine on each one the maximum of physical, chemical and mechanical tests in order not only to be able to compare them in precise conditions, but also to set up each sample as a standard intended for future studies. In other words, each element in the mentioned list must, in my mind, be able to serve in the future as reference to which we will compare the other kinds of calcareous stones used for building. As all the available material was not used, we were able to keep some as a reserve in case later comparisons would be necessary.

Open-File Report↗