Search USGS⌕ Search

SEARCH · Search USGS

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources
USGS2013

Satellite images of the September 2013 flood event in Lyons, Colorado

The U.S. Geological Survey (USGS) Special Applications Science Center (SASC) produced an image base map showing high-resolution remotely sensed data over Lyons, Colorado—a city that was severely affected by the flood event that occurred throughout much of the Colorado Front Range in September of 2013. The 0.5-meter WorldView-2 data products were created from imagery collected by DigitalGlobe on September 13 and September 24, 2013, during and following the flood event. The images shown on this map were created to support flood response efforts, specifically for use in determining damage assessment and mitigation decisions. The raw, unprocessed imagery were orthorectified and pan-sharpened to enhance mapping accuracy and spatial resolution, and reproduced onto a cartographic base map. These maps are intended to provide a snapshot representation of post-flood ground conditions, which may be useful to decisionmakers and the general public. The SASC also provided data processing and analysis support for other Colorado flood-affected areas by creating cartographic products, geo-corrected electro-optical and radar image mosaics, and GIS water cover files for use by the Colorado National Guard, the National Park Service, the U.S. Forest Service, and the flood response community. All products for this International Charter event were uploaded to the USGS Hazards Data Distribution System (HDDS) website (http://hdds.usgs.gov/hdds2/) for distribution.

Colorado↗
USGS2014

The shallow stratigraphy and sand resources offshore from Cat Island, Mississippi

In collaboration with the U.S. Army Corps of Engineers, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center collected over 487 line kilometers (> 300 miles) of high-resolution geophysical data around Cat Island, Mississippi, to improve understanding of the island's geologic evolution and identify potential sand resources for coastal restoration. In addition, 40 vibracores were collected on and around the island, generating more than 350 samples for grain-size analysis. The results indicate that the geologic evolution of Cat Island has been influenced by deltaic, lagoonal/estuarine, tidal, and oceanographic processes, resulting in a stratigraphic record that is quite complex. The region north of the island is dominated by lagoonal/estuarine deposition, whereas the region south of the island is dominated by deltaic and tidal deposition. In general, the veneer of modern sediment surrounding the island is composed of newly deposited sediment and highly reworked relict sediments. The region east of the island shows the interplay of antecedent barrier-island change with delta development despite a significant ravinement of sediments. The data show from little to no modern sediment east of the island, exposing relict sediments at the seafloor. Finally, the data reveal four subaqueous sand units around the island. Two of the units are northwest of the modern island and one is southwest. Given the dominant, westward, longshore transport along the Mississippi and Alabama barrier islands, the geographic location of these three units suggests that they do not contribute to the modern sediment budget of Cat Island. The last unit is directly east of the island and represents the antecedent island platform that has supplied sand over geologic time for creation of the spits that form the eastern shoreline. Because of its location east of the island, the antecedent island unit may still supply sediment to the island today.

Mississippi↗
USGS2022

Colored shaded-relief bathymetric map and surrounding aerial imagery of Whiskeytown Lake, California

The Carr wildfire began on July 23, 2018, and burned almost 300,000 acres (approximately half on Federal lands) in northern California during the subsequent 6-week period. Over 97 percent of the area within Whiskeytown National Recreation Area, California, burned during the 2018 Carr wildfire, including the entire landscape that surrounds and drains into Whiskeytown Lake. Shortly after the Carr wildfire ended, the U.S. Geological Survey began investigations into the landscape responses, such as changes in erosion and sediment deposition, that occurred after the fire. This study focused on the collection and processing of bathymetric data and onshore aerial imagery in and around Whiskeytown Lake, California, to support wildfire science after the fire.

California↗
USGS2020

Development of a new open-source tool to map burned area and burn severity

Accurate and complete geospatial fire occurrence records are important in determining postfire effects, emissions, hazards, and fuel loading inventories. Currently, the Monitoring Trends in Burn Severity (MTBS) project maps the fire perimeter and burn severity of all large fires on public lands. Although the MTBS project maps a large proportion of the fire acreage, it maps a smaller proportion of the actual number of fires in the United States, thereby creating a data gap. To fill this data gap, fire scientists at the U.S. Geological Survey (USGS) Earth Resources Observation and Science Center (EROS; Sioux Falls, South Dakota) proposed creating an open-source Fire Mapping Tool (FMT; available at https://mtbs.gov/qgis-fire-mapping-tool) as part of a two-phase National Aeronautics and Space Administration (NASA) Applied Fire Science Program grant. Phase II developed the FMT to map burn perimeters and severity not included in the MTBS database. This paper will focus on Phase II and will explain the algorithms that enhance the FMT’s functionality, demonstrate fire mapping procedures, and provide an example comparison between MTBS analyst fire products and those mapped using the FMT. The overall goal in the production of the FMT was to provide a freely available tool that can be used to map fires anywhere in the world.

Washington↗
USGS2023

A conceptual workflow for projecting future riverine and coastal flood hazards to support the federal flood risk management standard

In 2021, the reinstatement of the Federal Flood Risk Management Standard (FFRMS) required federally funded projects to recognize potential increases in flood hazards over their service lives due to climate change or local anthropogenic perturbations. Recognizing that the state of the science had advanced since the implementation guidelines for this standard were published in 2015 (WRC, 2015, Appendix H), an interagency state-of-the-science review committee conceptualized a workflow to guide the mapping and risk communication of projected future flood hazards in both riverine and coastal settings. This five-element workflow connects climate, hydrologic, and hydraulic models, incorporates land and water management impacts and ongoing geomorphic changes, and can be tailored to the unique nature of different agency needs and resources. These conceptual workflows also provide a basis for a Climate-Informed Science Approach (CISA) implementation roadmap that identifies incremental steps for addressing the research and data gaps elucidated in our review. Many of these incremental steps present opportunities for interagency collaboration that would facilitate the rollout of the FFRMS in diverse riverine and coastal settings of the United States. We conduct case-study thought experiments to evaluate the implementation of the riverine and coastal workflows at three different locations in the United States: central Indiana, Galveston, Texas, and a small coastal community in western Alaska (Shaktoolik). Our thought experiments consider different project horizons, data availability, failure consequences, technical training requirements, and computational resources.

Conference Paper↗
USGS2009

Archive of digital boomer seismic reflection data collected offshore east-central Florida during USGS cruise 00FGS01, July 14-22, 2000

In July of 2000, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore Florida's east coast from Brevard County to northern Martin County. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, Geographic Information System (GIS) information, digital and handwritten Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. A filtered and gained (a relative increase in signal amplitude) digital image of each seismic profile is also provided. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2005). Example SU processing scripts and USGS Software for viewing the SEG-Y files (Zihlman, 1992) are also provided. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 00FGS01 tells us the data were collected in 2000 for cooperative work with the Florida Geological Survey (FGS) and the data were collected during the first field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer plate is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged, emits a short acoustic pulse, or shot, which propagates through the water, sediment column, or rock beneath. The acoustic energy is reflected at density boundaries (such as the seafloor, sediment, or rock layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2D) vertical profile of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters. The unprocessed seismic data are stored in SEG-Y format (Barry and others, 1975). For a detailed description of the data format, refer to the SEG-Y Format page. See the How To Download SEG-Y Data page for download instructions. The printable profiles provided are GIF images that were filtered and gained using Seismic Unix software. Refer to the Software page for details about the processing and examples of the processing scripts. The printable profiles can be viewed from the Profiles page or from links located on the trackline maps. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page. Detailed information about the navigation system used can be found in table 1. Of a total record length of 200 ms, only the upper 100 ms of each profile are displayed because no useful information was observed deeper in the sections. A 10 ms deep water delay appears on lines b57-b63 and sl2-sl28. No digital data were collected for line sl6. However, line sl6r is a second attempt to collect digital data for this line. Digital data and 500-shot-interval location navigation are not available for the last 1,161 shots of line sl26 due to an equipment malfunction.

Florida↗
USGS2011

Lidar vegetation mapping in national parks: Gulf Coast Network

Airborne lidar (Light Detection and Ranging) is an active remote sensing technique used to collect accurate elevation data over large areas. Lidar provides an extremely high level of regional topographic detail, which makes this technology an essential component of U.S. Geological Survey (USGS) science strategy. The USGS Coastal and Marine Geology Program (CMGP) has collaborated with the National Aeronautics and Space Administration (NASA) and the National Park Service (NPS) to acquire dense topographic lidar data in a variety of coastal environments.

Louisiana↗
USGS2018

Revised recommended methods for analyzing crater size-frequency distributions

Impact crater populations crucially help us to understand solar system dynamics, planetary surface histories, and surface modification processes. A single previous effort to standardize how crater data are displayed in graphs, tables, and archives, was in a 1978 NASA report by the Crater Analysis Techniques Working Group, published in 1979 in Icarus . The report had a significant lasting effect, but later decades brought major advances in statistical and computer sciences while the crater field has remained fairly stagnant. In this new work, we revisit the fundamental techniques for displaying and analyzing crater population data and demonstrate better statistical methods that can be used. Specifically, we address (1) how crater size-frequency distributions (SFDs) are constructed, (2) how error bars are assigned to SFDs, and (3) how SFDs are fit to power laws and other models. We show how the new methods yield results similar to those of previous techniques in that the SFDs have familiar shapes but better account for multiple sources of uncertainty. We also recommend graphic, display, and archiving methods that reflect computers' capabilities and fulfill NASA's current requirements for Data Management Plans.

Meteoritics and Planetary Science↗
USGS2012

Archive of digital chirp subbottom profile data collected during USGS cruise 10BIM04 offshore Cat Island, Mississippi, September 2010

In September of 2010, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE), conducted a geophysical survey to investigate the geologic controls on barrier island framework of Cat Island, Miss., as part of a broader USGS study on Barrier Island Mapping (BIM). These surveys were funded through the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project as part of the Holocene Coastal Evolution of the Mississippi-Alabama Region Subtask. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 10BIM04 tells us the data were collected in 2010 during the fourth field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID). All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-512i system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy; it was housed within a float system (built at the SPCMSC), which allows the towfish to be towed at a constant depth of 1.07 meters (m) below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, some energy is reflected back toward the transducer, received, and recorded by a Personal Computer (PC)-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)), and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in American Standard Code for Information Interchange (ASCII) format instead of Extended Binary Coded Decimal Interchange Code (EBCDIC) format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software, and they can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software.

Mississippi↗
USGS2007

Antarctic Multibeam Bathymetry and Geophysical Data Synthesis: an on-line digital data Resource for marine geoscience research in the Southern Ocean

The Antarctic Multibeam Bathymetry and Geophysical Data Synthesis(AMBS) is a web-accessible data resource for marine geoscience research in the Southern Ocean. The primary focusisto preserve and provide public accessto multibeam bathymetry acquired during expeditions of research vesselssupported by the U.S. National Science Foundation. Since itsinception in 2003, our primary goal has been to facilitate visualization and exploration of the subsea landscape to the full detail of the original data by both specialists and non-specialists. Visualization across a widerange of map scales at high latitudesis made possible by dynamic accessto a gridded synthesisin both Polar and Mercator projections. A second goal isto support multi-disciplinary research needs by offering data discovery and visualization of numerous complementary geoscience datasets.In thisreport, we describe the design objectives and architecture of the AMBS, as well asrecent developmentsregarding data submission and delivery via Web Services

Open-File Report↗
USGS2010

Archive of side scan sonar and swath bathymetry data collected during USGS cruise 10CCT01 offshore of Cat Island, Gulf Islands National Seashore, Mississippi, March 2010

In March of 2010, the U.S. Geological Survey (USGS) conducted geophysical surveys east of Cat Island, Mississippi (fig. 1). The efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geological stratigraphic framework of the Mississippi Barrier Island Complex. These geophysical surveys will provide the data necessary for scientists to define, interpret, and provide baseline bathymetry and seafloor habitat for this area and to aid scientists in predicting future geomorpholocial changes of the islands with respect to climate change, storm impact, and sea-level rise. Furthermore, these data will provide information for barrier island restoration, particularly in Camille Cut, and provide protection for the historical Fort Massachusetts. For more information refer to http://ngom.usgs.gov/gomsc/mscip/index.html. This report serves as an archive of the processed swath bathymetry and side scan sonar data (SSS). Data products herein include gridded and interpolated surfaces, surface images, and x,y,z data products for both swath bathymetry and side scan sonar imagery. Additional files include trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Scanned images of the handwritten FACS logs and digital FACS logs are also provided as PDF files. Refer to the Acronyms page for expansion of acronyms and abbreviations used in this report or hold the cursor over an acronym for a pop-up explanation. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 10CCT01 tells us the data were collected in 2010 for the Coastal Change and Transport (CCT) study and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. Data were collected using a 26-foot (ft) Glacier Bay Catamaran. Side scan sonar and interferometric swath bathymetry data were collected simultaneously along the tracklines. The side scan sonar towfish was towed off the port side just slightly behind the vessel, close to the seafloor. The interferometric swath transducer was sled-mounted on a rail attached between the catamaran hulls. During the survey the sled is secured into position. Navigation was acquired with a CodaOctopus Octopus F190 Precision Attitude and Positioning System and differentially corrected with OmniSTAR. See the digital FACS equipment log for details about the acquisition equipment used. Both raw datasets were stored digitally and processed using CARIS HIPS and SIPS software at the USGS St. Petersburg Coastal and Marine Science Center. For more information on processing refer to the Equipment and Processing page. Post-processing of the swath dataset revealed a motion artifact that is attributed to movement of the pole that the swath transducers are attached to in relation to the boat. The survey took place in the winter months, in which strong winds and rough waves contributed to a reduction in data quality. The rough seas contributed to both the movement of the pole and the very high noise base seen in the raw amplitude data of the side scan sonar. Chirp data were also collected during this survey and are archived separately.

Mississippi↗
USGS2018

Wrangling distributed computing for high-throughput environmental science: An introduction to HTCondor

Biologists and environmental scientists now routinely solve computational problems that were unimaginable a generation ago. Examples include processing geospatial data, analyzing -omics data, and running large-scale simulations. Conventional desktop computing cannot handle these tasks when they are large, and high-performance computing is not always available nor the most appropriate solution for all computationally intense problems. High-throughput computing (HTC) is one method for handling computationally intense research. In contrast to high-performance computing, which uses a single "supercomputer," HTC can distribute tasks over many computers (e.g., idle desktop computers, dedicated servers, or cloud-based resources). HTC facilities exist at many academic and government institutes and are relatively easy to create from commodity hardware. Additionally, consortia such as Open Science Grid facilitate HTC, and commercial entities sell cloud-based solutions for researchers who lack HTC at their institution. We provide an introduction to HTC for biologists and environmental scientists. Our examples from biology and the environmental sciences use HTCondor, an open source HTC system.

PLOS Computational Biology↗
USGS2008

Users Manual for the Geospatial Stream Flow Model (GeoSFM)

The monitoring of wide-area hydrologic events requires the manipulation of large amounts of geospatial and time series data into concise information products that characterize the location and magnitude of the event. To perform these manipulations, scientists at the U.S. Geological Survey Center for Earth Resources Observation and Science (EROS), with the cooperation of the U.S. Agency for International Development, Office of Foreign Disaster Assistance (USAID/OFDA), have implemented a hydrologic modeling system. The system includes a data assimilation component to generate data for a Geospatial Stream Flow Model (GeoSFM) that can be run operationally to identify and map wide-area streamflow anomalies. GeoSFM integrates a geographical information system (GIS) for geospatial preprocessing and postprocessing tasks and hydrologic modeling routines implemented as dynamically linked libraries (DLLs) for time series manipulations. Model results include maps that depicting the status of streamflow and soil water conditions. This Users Manual provides step-by-step instructions for running the model and for downloading and processing the input data required for initial model parameterization and daily operation.

Open-File Report↗
USGS2007

Land Cover Applications, Landscape Dynamics, and Global Change

The Land Cover Applications, Landscape Dynamics, and Global Change project at U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) seeks to integrate remote sensing and simulation models to better understand and seek solutions to national and global issues. Modeling processes related to population impacts, natural resource management, climate change, invasive species, land use changes, energy development, and climate mitigation all pose significant scientific opportunities. The project activities use remotely sensed data to support spatial monitoring, provide sensitivity analyses across landscapes and large regions, and make the data and results available on the Internet with data access and distribution, decision support systems, and on-line modeling. Applications support sustainable natural resource use, carbon cycle science, biodiversity conservation, climate change mitigation, and robust simulation modeling approaches that evaluate ecosystem and landscape dynamics.

Fact Sheet↗
USGS2013

Estimation of missing water-level data for the Everglades Depth Estimation Network (EDEN), 2013 update

The Everglades Depth Estimation Network is an integrated network of real-time water-level gaging stations, a ground-elevation model, and a water-surface elevation model designed to provide scientists, engineers, and water-resource managers with water-level and water-depth information (1991-2013) for the entire freshwater portion of the Greater Everglades. The U.S. Geological Survey Greater Everglades Priority Ecosystems Science provides support for the Everglades Depth Estimation Network in order for the Network to provide quality-assured monitoring data for the U.S. Army Corps of Engineers Comprehensive Everglades Restoration Plan. In a previous study, water-level estimation equations were developed to fill in missing data to increase the accuracy of the daily water-surface elevation model. During this study, those equations were updated because of the addition and removal of water-level gaging stations, the consistent use of water-level data relative to the North American Vertical Datum of 1988, and availability of recent data (March 1, 2006, to September 30, 2011). Up to three linear regression equations were developed for each station by using three different input stations to minimize the occurrences of missing data for an input station. Of the 667 water-level estimation equations developed to fill missing data at 223 stations, more than 72 percent of the equations have coefficients of determination greater than 0.90, and 97 percent have coefficients of determination greater than 0.70.

Florida↗
USGS2022

System characterization report on the Amazônia-1 multispectral sensor

Executive Summary This report addresses system characterization of the Instituto Nacional de Pesquisas Espaciais Amazônia-1 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Amazônia-1 is a four-band imager with a 64-meter (m) pixel ground sample distance. Amazônia-1 was launched in February 2021 into a Sun-synchronous orbit of 752 kilometers with an inclination of 98.4 degrees and a swath width of 850 kilometers. The satellite has an expected lifetime of about 4 years. More information on Amazônia-1 is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the Amazônia-1 satellite has an interior geometric performance in the range of −3.584 m (−0.056 pixel) to 0.320 m (0.005 pixel) in easting and −1.984 m (−0.031 pixel) to 2.048 m (0.032 pixel) in northing in band-to-band registration, an exterior geometric performance of −37.256 m (−0.621 pixel) to 54.758 m (0.913 pixel) in easting and −12.684 m (−0.211 pixel) to 54.898 m (0.915 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of 0.030 to 0.143 in offset and 0.662 to 0.825 in slope, and a spatial performance in the range of 1.62 to 2.06 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.062 to 0.115.

Open-File Report↗
USGS2014

Coastal bathymetry and backscatter data collected in 2012 from the Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research Project, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys off the northern Chandeleur Islands, Louisiana, in July and August of 2012. The objective of the study is to better understand barrier island geomorphic evolution, particularly storm-related depositional and erosional processes that shape the islands over annual to interannual timescales (1-5 years). Collecting geophysical data will allow us to identify relationships between the geologic history of the island and its present day morphology and sediment distribution. This mapping effort was the second in a series of three planned surveys in this area. High resolution geophysical data collected in each of 3 consecutive years along this rapidly changing barrier island system will provide a unique time-series dataset that will significantly further the analyses and geomorphological interpretations of this and other coastal systems, improving our understanding of coastal response and evolution over short time scales (1-5 years). This Data Series report includes the geophysical data that were collected during two cruises ( USGS Field Activity Numbers 12BIM03 and 12BIM04 ) aboard the RV Survey Cat and the RV Twin Vee along the northern portion of the Chandeleur Islands, Breton National Wildlife Refuge, Louisiana. Data were acquired with the following equipment: a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz (kHz)), an EdgeTech 424 (4-24 kHz) chirp sub-bottom profiling system, and a Knudsen 320BP (210 kHz) echosounder. This report serves as an archive of processed interferometric swath and single-beam bathymetry data. Geographic information system data products include an interpolated digital elevation model, an acoustic backscatter mosaic, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation.

Louisiana↗
USGS2022

Monitoring framework to evaluate effectiveness of aquatic and floodplain habitat restoration activities for native fish along the Willamette River, northwestern Oregon

Since 2008, large-scale restoration programs have been implemented along the Willamette River, Oregon, to address historical losses of floodplain habitats caused by dam construction, bank protection, large wood removal, land conversion, and other anthropogenic influences. The Willamette Focused Investment Partnership (WFIP) restoration initiative brings together more than 16 organizations to improve floodplain habitats on more than 35,000 hectares upstream from Willamette Falls with the overarching goal to expand and enhance native fish habitats through the following restoration activities implemented along the floodplains and off-channel areas of the Willamette River: (A) modify floodplain topography and human-made barriers to inundation; (B) enhance gravel pits; (C) remove revetments; (D) construct off-channel features; (E) increase and enhance floodplain forest vegetation; and (F) treat aquatic invasive plant species (AIS). The WFIP Effectiveness Monitoring Program was initiated to inform future refinement of Willamette River restoration program goals and activities and has three goals: (1) evaluate the effectiveness of different restoration activities at increasing and enhancing native fish habitat, (2) improve overall understanding of the physical and ecological responses associated with different restoration activities undertaken by the WFIP, and (3) relate site-scale responses to restoration with broader patterns of fish communities, hydrogeomorphology, stream temperature, and vegetation across the Willamette River floodplain, so that the relative importance of restoration activities on habitat availability for native fish can be assessed. A monitoring framework was developed to evaluate effectiveness of floodplain restoration activities at increasing and enhancing habitat for native fish in the Willamette River corridor, northwestern Oregon. This framework describes monitoring indicators, metrics, and approaches for evaluating responses in native fish communities and physical habitat conditions to restoration activities and determining effectiveness of restoration activities at improving habitats for native fish. The monitoring indicators and approaches are grouped into five restoration monitoring categories that are useful for characterizing ecological and physical habitat responses to restoration activities: fish, hydrogeomorphology, floodplain forest vegetation, birds, and AIS. This monitoring framework provides a common science foundation to support collaborative decisions on future interdisciplinary effectiveness monitoring activities for Willamette River restoration programs. To evaluate restoration effectiveness, data must be evaluated according to metrics and thresholds that permit direct comparison between habitat conditions at the restoration site and restoration program goals; this framework provides examples of metrics and thresholds for evaluating data, recognizing that the precise evaluation criteria for a particular site or program will need to be tailored to meet program questions and available resources. Refining restoration goals and activities as part of an adaptively managed process requires addressing critical uncertainties between restoration goals, restoration activities, and outcomes for habitats used by native fish. Although the monitoring activities of this framework will generate important datasets useful for evaluating restoration effectiveness, additional research, syntheses, and reporting is ultimately necessary to provide a common science foundation to support adaptively managed restoration programs. This report is intended as a resource for restoration program managers, practitioners, scientists, and contractors as they develop detailed annual monitoring plans for data collection and identify the monitoring indicators, metrics, and approaches that are appropriate for evaluating effectiveness of different restoration activities.

Oregon↗