SEARCH · Search USGS

Results for “Trace Elements Investigations”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

USGS1987

Hydrologic data for selected streams in the coal area of southeastern Oklahoma, July 1978 to September 1982

Hydrologic data on quantity and quality of surface waters were collected in the coal resource area of southeastern Oklahoma during an investigation of the effects of coal surface mining on the hydrology of the area. The objective of the study was to determine the characteristics of the regional hydrologic system and to detect and document changes in the system that may occur as the result of coal surface mining. This report presents data which were collected at 13 sites in 4 counties between July 1978 and September 1982. The data include: (1) mean daily stream discharge; (2) physical properties, selected field constituents, and concentration of suspended sediment of water samples; (3) concentration of selected common constituents, nutrients, and trace elements of water samples; (4) mean daily specific conductance, pH, water temperature, and dissolved oxygen; and (5) analyses of biological samples.

Open-File Report↗

USGS2009

Estimated Loads of Suspended Sediment and Selected Trace Elements Transported through the Milltown Reservoir Project Area Before and After the Breaching of Milltown Dam in the Upper Clark Fork Basin, Montana, Water Year 2008

This report presents estimated daily and cumulative loads of suspended sediment and selected trace elements transported during water year 2008 at three streamflow-gaging stations that bracket the Milltown Reservoir project area in the upper Clark Fork basin of western Montana. Milltown Reservoir is a National Priorities List Superfund site where sediments enriched in trace elements from historical mining and ore processing have been deposited since the construction of Milltown Dam in 1907. Milltown Dam was breached on March 28, 2008, as part of Superfund remedial activities to remove the dam and contaminated sediment that had accumulated in Milltown Reservoir. The estimated loads transported through the project area during the periods before and after the breaching of Milltown Dam, and for the entire water year 2008, were used to quantify the net gain or loss (mass balance) of suspended sediment and trace elements within the project area during the transition from a reservoir environment to a free-flowing river. This study was done in cooperation with the U.S. Environmental Protection Agency. Streamflow during water year 2008 compared to long-term streamflow, as represented by the record for Clark Fork above Missoula (water years 1930-2008), generally was below normal (long-term median) from about October 2007 through April 2008. Sustained runoff started in mid-April, which increased flows to near normal by mid-May. After mid-May, flows sharply increased to above normal, reaching a maximum daily mean streamflow of 16,800 cubic feet per second (ft3/s) on May 21, which essentially equaled the long-term 10th-exceedance percentile for that date. Flows substantially above normal were sustained through June, then decreased through the summer and reached near-normal by August. Annual mean streamflow during water year 2008 (3,040 ft3/s) was 105 percent of the long-term mean annual streamflow (2,900 ft3/s). The annual peak flow (17,500 ft3/s) occurred on May 21 and was 112 percent of the long-term mean annual peak flow (15,600 ft3/s). About 81 percent of the annual flow volume was discharged during the post-breach period. Daily loads of suspended sediment were estimated directly by using high-frequency sampling of the daily sediment monitoring. Daily loads of unfiltered-recoverable arsenic, cadmium, copper, iron, lead, manganese, and zinc were estimated by using regression equations relating trace-element discharge to either streamflow or suspended-sediment discharge. Regression equations for estimating trace-element discharge in water year 2008 were developed from instantaneous streamflow and concentration data for periodic water-quality samples collected during all or part of water years 2004-08. The equations were applied to records of daily mean streamflow or daily suspended-sediment loads to produce estimated daily trace-element loads. Variations in daily suspended-sediment and trace-element loads generally coincided with variations in streamflow. Relatively small to moderately large daily net losses from the project area were common during the pre-breach period when low-flow conditions were prevalent. Outflow loads from the project area sharply increased immediately after the breaching of Milltown Dam and during the rising limb and peak flow of the annual hydrograph. Net losses of suspended sediment and trace elements from the project area decreased as streamflow decreased during the summer, eventually becoming small or reaching an approximate net balance between inflow and outflow. Estimated daily loads of suspended sediment and trace elements for all three stations were summed to determine cumulative inflow and outflow loads for the pre-breach and post-breach periods, as well as for the entire water year 2008. Overall, the mass balance between the combined inflow loads from two upstream source areas (upper Clark Fork and Blackfoot River basins) and the outflow loads at Clark Fork above Missoula indicates net losses

Scientific Investigations Report↗

USGS2021

Long-term African dust delivery to the eastern Atlantic Ocean from the Sahara and Sahel regions: Evidence from Quaternary paleosols on the Canary Islands, Spain

Africa is the most important source of dust in the world today and dust storms from that continent frequently deposit sediment on the nearby Canary Islands. Many investigators have inferred African dust inputs to Canary Islands paleosols based only on the presence of quartz. However, some local rocks do contain this mineral, so quartz alone is insufficient proof of dust deposition. Further, it is not known whether the Sahara Desert or the Sahel region is more important as a dust source. We address these issues by study of sequences of Pleistocene aeolian sands on the islands of Lanzarote and Fuerteventura. Aeolian sands are composed mostly of marine carbonate minerals and locally derived volcanic minerals. They date from the early-middle Pleistocene to the Holocene. Trace element geochemistry shows that the soils formed from both locally derived basalt and African dust. Major element geochemistry and clay mineralogy indicate that dust additions to the Canary Islands likely come from both the Sahara and Sahel. Dust delivered from the Sahel indicates that droughts in that region have had a history extending through much of the Quaternary. Accretionary-inflationary profile development, from dust accretion, is evident in the upward growth of Canary Islands paleosols.

Quaternary Science Reviews↗

USGS2012

Organic contaminants, trace and major elements, and nutrients in water and sediment sampled in response to the Deepwater Horizon oil spill

Beach water and sediment samples were collected along the Gulf of Mexico coast to assess differences in contaminant concentrations before and after landfall of Macondo-1 well oil released into the Gulf of Mexico from the sinking of the British Petroleum Corporation's Deepwater Horizon drilling platform. Samples were collected at 70 coastal sites between May 7 and July 7, 2010, to document baseline, or "pre-landfall" conditions. A subset of 48 sites was resampled during October 4 to 14, 2010, after oil had made landfall on the Gulf of Mexico coast, called the "post-landfall" sampling period, to determine if actionable concentrations of oil were present along shorelines. Few organic contaminants were detected in water; their detection frequencies generally were low and similar in pre-landfall and post-landfall samples. Only one organic contaminant--toluene--had significantly higher concentrations in post-landfall than pre-landfall water samples. No water samples exceeded any human-health benchmarks, and only one post-landfall water sample exceeded an aquatic-life benchmark--the toxic-unit benchmark for polycyclic aromatic hydrocarbons (PAH) mixtures. In sediment, concentrations of 3 parent PAHs and 17 alkylated PAH groups were significantly higher in post-landfall samples than pre-landfall samples. One pre-landfall sample from Texas exceeded the sediment toxic-unit benchmark for PAH mixtures; this site was not sampled during the post-landfall period. Empirical upper screening-value benchmarks for PAHs in sediment were exceeded at 37 percent of post-landfall samples and 22 percent of pre-landfall samples, but there was no significant difference in the proportion of samples exceeding benchmarks between paired pre-landfall and post-landfall samples. Seven sites had the largest concentration differences between post-landfall and pre-landfall samples for 15 alkylated PAHs. Five of these seven sites, located in Louisiana, Mississippi, and Alabama, had diagnostic geochemical evidence of Macondo-1 oil in post-landfall sediments and tarballs. For trace and major elements in water, analytical reporting levels for several elements were high and variable. No human-health benchmarks were exceeded, although these were available for only two elements. Aquatic-life benchmarks for trace elements were exceeded in 47 percent of water samples overall. The elements responsible for the most exceedances in post-landfall samples were boron, copper, and manganese. Benchmark exceedances in water could be substantially underestimated because some samples had reporting levels higher than the applicable benchmarks (such as cobalt, copper, lead and zinc) and some elements (such as boron and vanadium) were analyzed in samples from only one sampling period. For trace elements in whole sediment, empirical upper screening-value benchmarks were exceeded in 57 percent of post-landfall samples and 40 percent of pre-landfall samples, but there was no significant difference in the proportion of samples exceeding benchmarks between paired pre-landfall and post-landfall samples. Benchmark exceedance frequencies could be conservatively high because they are based on measurements of total trace-element concentrations in sediment. In the less than 63-micrometer sediment fraction, one or more trace or major elements were anthropogenically enriched relative to national baseline values for U.S. streams for all sediment samples except one. Sixteen percent of sediment samples exceeded upper screening-value benchmarks for, and were enriched in, one or more of the following elements: barium, vanadium, aluminum, manganese, arsenic, chromium, and cobalt. These samples were evenly divided between the sampling periods. Aquatic-life benchmarks were frequently exceeded along the Gulf of Mexico coast by trace elements in both water and sediment and by PAHs in sediment. For the most part, however, significant differences between pre-landfall and post-landfall samples were limited to concentrations of PAHs in sediment. At five sites along the coast, the higher post-landfall concentrations of PAHs were associated with diagnostic geochemical evidence of Deepwater Horizon Macondo-1 oil.

Alabama, Arkansas, Florida, Georgia, Louisiana, Te↗

USGS2012

Reconnaissance of contaminants in selected wastewater-treatment-plant effluent and stormwater runoff entering the Columbia River, Columbia River Basin, Washington and Oregon, 2008-10

Toxic contamination is a significant concern in the Columbia River Basin in Washington and Oregon. To help water managers and policy makers in decision making about future sampling efforts and toxic-reduction activities, a reconnaissance was done to assess contaminant concentrations directly contributed to the Columbia River through wastewater-treatment-plant (WWTP) effluent and stormwater runoff from adjacent urban environments and to evaluate instantaneous loadings to the Columbia River Basin from these inputs. Nine cities were selected in Oregon and Washington to provide diversity in physical setting, climate characteristics, and population density—Wenatchee, Richland, Umatilla, The Dalles, Hood River, Portland, Vancouver, St. Helens, and Longview. Samples were collected from a WWTP in each city and analyzed for anthropogenic organic compounds, pharmaceuticals, polychlorinated biphenyls (PCBs), polybrominated diphenyl ether (PBDEs [brominated flame-retardants]), organochlorine or legacy compounds, currently used pesticides, mercury, and estrogenicity. Of the 210 compounds analyzed in the WWTP-effluent samples, 112 (53 percent) were detected, and the detection rate for most compound classes was greater than 80 percent. Despite the differences in location, population, treatment type, and plant size, detection frequencies were similar for many of the compounds detected among the WWTPs. By contrast, the occurrence of polycyclic aromatic hydrocarbons (PAHs) was sporadic, and PCBs were detected at only three WWTPs. The stormwater-runoff samples were analyzed for a slightly different set of contaminants, with the focus on those expected to be related to road and land runoff—PCBs, PBDEs, organochlorine compounds, PAHs, currently used pesticides, trace elements, mercury, and oil and grease. A complex mixture of compounds was detected in stormwater runoff, with detections of 114 (58 percent) of the 195 compounds analyzed. The detection patterns and concentrations measured in the stormwater-runoff samples, however, were more heterogeneous than in the WWTP-effluent samples. This reflects differences in various factors, including suspended-sediment concentrations and known contamination sources present in some watersheds. Trace elements and PAHs, which are related to automobiles and impervious surfaces, were the most widespread compound classes detected in stormwater runoff, a typical finding in stormwater runoff in urban areas. With a better understanding of the presence of these contaminants in the environment, future work can focus on developing research to characterize the effects of these contaminants on aquatic life and prioritize toxic-reduction efforts for the Columbia River Basin.

Washington;Oregon↗

USGS2014

Groundwater levels and water quality during a 96-hour aquifer test in Pickaway County, Ohio, 2012

During October–November 2012, a 96-hour aquifer test was performed at a proposed well field in northern Pickaway County, Ohio, to investigate groundwater with elevated nitrate concentrations. Earlier sampling done by the City of Columbus revealed that some wells had concentrations of nitrate that approached 10 milligrams per liter (mg/L), whereas other wells and the nearby Scioto River had concentrations from 2 to 6 mg/L. The purpose of the current test was to examine potential changes in water quality that may be expected if the site was developed into a public water-supply source; therefore, water-transmitting properties determined during a previous test were not determined a second time. Before and during the test, water-level data and water-quality samples were obtained from observation wells while a test production well was pumped at 1,300 gallons per minute. Before the test, local groundwater levels indicated that groundwater was being discharged to the nearby Scioto River, but during the test, the stream was losing streamflow owing to infiltration. Water levels declined in the pumping well, in adjacent observation wells, and in a nearby streambed piezometer as pumping commenced. The maximum drawdown in the pumping well was 29.75 feet, measured about 95 hours after pumping began. Water-quality data, including analyses for field parameters, major and trace elements, nutrients, and stable isotopes of oxygen and nitrogen in nitrate, demonstrated only small variations before and during the test. Concentrations of nitrate in five samples from the pumping well ranged from about 5.10 to 5.42 mg/L before and during the test, whereas concentrations of nitrate in five samples on or about the same sampling dates and times at a monitoring site on the Scioto River adjacent to the pumping well ranged from 3.46 to 4.97 mg/L. Water from two nearby observation wells had nitrate concentrations approaching 10 mg/L, which is the U.S. Environmental Protection Agency’s Maximum Contaminant Level for nitrate. Analysis of isotopes of oxygen and nitrogen in nitrate indicated that the source of nitrate is most likely soil nitrogen and fertilizer, with some denitrification and (or) mixing with some manure and septic waste derived from upstream wastewater-treatment facilities.

Ohio↗

USGS2009

Geochemistry of standard mine waters, Gunnison County, Colorado, July 2009

In many hard-rock-mining districts water flowing from abandoned mine adits is a primary source of metals to receiving streams. Understanding the generation of adit discharge is an important step in developing remediation plans. In 2006, the U.S. Environmental Protection Agency listed the Standard Mine in the Elk Creek drainage basin near Crested Butte, Colorado as a superfund site because drainage from the Standard Mine enters Elk Creek, contributing dissolved and suspended loads of zinc, cadmium, copper, and other metals to the stream. Elk Creek flows into Coal Creek, which is a source of drinking water for the town of Crested Butte. In 2006 and 2007, the U.S. Geological Survey undertook a hydrogeologic investigation of the Standard Mine and vicinity and identified areas of the underground workings for additional work. Mine drainage, underground-water samples, and selected spring water samples were collected in July 2009 for analysis of inorganic solutes as part of a follow-up study. Water analyses are reported for mine-effluent samples from Levels 1 and 5 of the Standard Mine, underground samples from Levels 2 and 3 of the Standard Mine, two spring samples, and an Elk Creek sample. Reported analyses include field measurements (pH, specific conductance, water temperature, dissolved oxygen, and redox potential), major constituents and trace elements, and oxygen and hydrogen isotopic determinations. Overall, water samples collected in 2009 at the same sites as were collected in 2006 have similar chemical compositions. Similar to 2006, water in Level 3 did not flow out the portal but was observed to flow into open workings to lower parts of the mine. Many dissolved constituent concentrations, including calcium, magnesium, sulfate, manganese, zinc, and cadmium, in Level 3 waters substantially are lower than in Level 1 effluent. Concentrations of these dissolved constituents in water samples collected from Level 2 approach or exceed concentrations of Level 1 effluent suggesting that water-rock interaction between Levels 3 and 1 can account for the elevated concentration of metals and other constituents in Level 1 portal effluent. Ore minerals (sphalerite, argentiferous galena, and chalcopyrite) are the likely sources of zinc, cadmium, lead, and copper and are present within the mine in unmined portions of the vein system, within plugged ore chutes, and in muck piles.

Colorado↗

USGS1998

Major-ion, nutrient, and trace-element concentrations in the Steamboat Creek basin, Oregon, 1996

In September 1996, a water-quality study was done by the U.S. Geological Survey, in coordination with the U.S. Forest Service, in headwater streams of Steamboat Creek, a tributary to the North Umpqua River Basin in southwestern Oregon. Field measurements were made in and surface-water and bottom-sediment samples were collected from three tributaries of Steamboat Creek--Singe Creek, City Creek, and Horse Heaven Creek--and at one site in Steamboat Creek upstream from where the three tributaries flow into Steamboat Creek. Water samples collected in Singe Creek had larger concentrations of most major-ion constituents and smaller concentrations of most nutrient constituents than was observed in the other three creeks. City Creek, Horse Heaven Creek, and Steamboat Creek had primarily calcium bicarbonate water, whereas Singe Creek had primarily a calcium sulfate water; the calcium sulfate water detected in Singe Creek, along with the smallest observed alkalinity and pH values, suggests that Singe Creek may be receiving naturally occurring acidic water. Of the 18 trace elements analyzed in filtered water samples, only 6 were detected--aluminum, barium, cobalt, iron, manganese, and zinc. All six of the trace elements were detected in Singe Creek, at concentrations generally larger than those observed in the other three creeks. Of the detected trace elements, only iron and zinc have chronic toxicity criteria established by the U.S. Environmental Protection Agency (USEPA) for the protection of aquatic life; none exceeded the USEPA criterion. Bottom-sediment concentrations of antimony, arsenic, cadmium, copper, lead, mercury, zinc, and organic carbon were largest in City Creek. In City Creek and Horse Heaven Creek, concentrations for 11 constituents--antimony, arsenic, cadmium, copper, lead, manganese (Horse Heaven Creek only), mercury, selenium, silver, zinc, and organic carbon (City Creek only)--exceeded concentrations considered to be enriched in streams of the nearby Willamette River Basin, whereas in Steamboat Creek only two trace elements--antimony and nickel--exceeded Willamette River enriched concentrations. Bottom-sediment concentrations for six of these constituents in City Creek and Horse Heaven Creek--arsenic, cadmium, copper, lead, mercury, and zinc--also exceeded interim Canadian threshold effect level (TEL) concentrations established for the protection of aquatic life, whereas only four constituents between Singe Creek and Steamboat Creek--arsenic, chromium, copper (Singe Creek only), and nickel--exceeded the TEL concentrations.

Oregon↗

USGS1999

Water-quality assessment of the Cook Inlet Basin, Alaska — Summary of data through 1997

Among the first activities undertaken in each National Water-Quality Assessment (NAWQA) investigation are the compilation, screening, and statistical summary of available data concerning water-quality conditions in the study unit. The water-quality conditions of interest are those that are representative of the general ambient water quality of a given stream reach or area of an aquifer. This report identifies which existing water-quality data are suitable for characterizing general conditions in a nationally consistent manner and describes, to the extent possible, general water-quality conditions in the Cook Inlet Basin in southcentral Alaska. The study unit consists of all lands that drain into Cook Inlet, but not the marine environment itself. Surface-water-quality data are summarized for 31 sites on streams. Ground-water quality data are summarized for four regions using analyses from about 550 wells that yield water from unconsolidated glacial and alluvial deposits and analyses from 17 wells in western Cook Inlet, some of which may yield water from coal or weakly consolidated sandstone or conglomerate. The summaries focus on the central tendencies and typical variations in the data and use nonparametric statistics such as frequencies and percentile values. Few surface- and ground-water sites have long-term water-quality records and very few data are available for dissolved oxygen, nutrients, metals, trace elements, organic compounds, and radionuclides. In general, most waters in streams and wells have small concentrations of major inorganic constituents, nutrients, trace elements, and organic compounds. Most streams have water that is generally suitable for drinking-water supply, the growth and propagation of cold-water anadromous fish, and water-contact recreation. However, suspended-sediment concentrations in glacier-fed streams are naturally high and can make water from glacier-fed streams unsuitable for many uses unless the water is treated to remove the suspended sediment. Several streams and lakes in Anchorage have fecal coliform bacteria concentrations higher than allowed for drinking or water-contact recreation. Ground water in the major withdrawal regions is generally suitable for drinking and most other purposes, but some wells yield water having nitrate, iron, or arsenic concentrations higher than drinking-water criteria. Ground-water quality has been degraded in several areas as the result of leaks or spills of petroleum products.

Alaska↗

USGS2026

Re-Os dating of paleozoic organic-rich black shales by LA-ICP-MS/MS

We present a new in-situ method for Re- Os geochronology of black shales using LA-ICP-MS/MS that is rapid, cost-effective, and sufficiently accurate and precise to address many geological questions. The method is tested on Paleozoic organic-rich black shales with independently constrained stratigraphic or radiometric ages. Results demonstrate that LA-ICP-MS/MS analysis yields Re- Os dates and initial Os isotopic compositions generally within uncertainty of published values using a laser spot size of 100 to 120 μ m in diameter. Despite low Os abundances in many samples, high-density microscale sampling compensates through large numbers of analyses, enabling robust inverse isochron regressions. The approach also allows contemporaneous acquisition of trace- element data (V, Ni, Mo and Re), providing insight into metal distribution in a sample, degree of metal enrichments, and serve as a proxy for open-system behavior for Re- Os. As a result, LA-ICP-MS/MS Re- Os analysis can serve both as a stand-alone geochronological tool and as an efficient screening method prior to conventional ID-N-TIMS, helping to identify optimal intervals and exclude isotopically disturbed material. Together, our study demonstrates that in-situ Re- Os geochronology of organic-rich shales is technically viable, geologically informative, and broadly applicable, opening new opportunities to investigate basin evolution, metallogenesis, hydrocarbon systems, and Earth-system processes across deep time.

Chemical Geology↗

USGS2012

Streamflow gain and loss and water quality in the upper Nueces River Basin, south-central Texas, 2008-10

The U.S. Geological Survey-in cooperation with the U.S. Army Corps of Engineers, The Nature Conservancy, the Real Edwards Conservation and Reclamation District, and the Texas Parks and Wildlife Department-investigated streamflow gain and loss and water quality in the upper Nueces River Basin, south-central Texas, specifically in the watersheds of the West Nueces, Nueces, Dry Frio, Frio, and Sabinal Rivers upstream from the Edwards aquifer outcrop. Streamflow in these rivers is sustained by groundwater contributions (for example, from springs) and storm runoff from rainfall events. To date (2012), there are few data available that describe streamflow and water-quality conditions of the rivers within the upper Nueces River Basin. This report describes streamflow gain-loss characteristics from three reconnaissance-level synoptic measurement surveys (hereinafter referred to as "surveys") during 2008-10 in the upper Nueces River Basin. To help characterize the hydrology, groundwater-level measurements were made, and water-quality samples were collected from both surface-water and groundwater sites in the study area from two surveys during 2009-10. The hydrologic (streamflow, springflow, and groundwater) measurements were made during three reconnaissance-level synoptic measurement surveys occurring in July 21-23, 2008; August 8-18, 2009; and March 22-24, 2010. These survey periods were selected to represent different hydrologic conditions. Streamflow gains and losses were based on streamflow and springflow measurements made at 74 sites in the study area, although not all sites were measured during each survey. Possible water chemistry relations among sample types (streamflow, springflow, or groundwater), between surveys, and among watersheds were examined using water-quality samples collected from as many as 20 sites in the study area. During the three surveys, reaches of gaining, losing, or no verifiable change in streamflow were observed in the watersheds in the study area. Reaches of generally consistent gaining or losing streamflow were identified in the Nueces, Frio, and Sabinal River watersheds. The water-quality data indicate that the streamflow, springflow, and groundwater have similar major ion chemical characteristics and generally can be categorized as a calcium-carbonate water type. Those data also indicate that the major ion chemistry was similar during the 2009 and 2010 surveys. Graphical comparisons among ratios of major ions, trace elements, and isotopes (for example, magnesium/calcium ratios to strontium isotopic ratios) indicate that samples collected from each watershed generally clustered together. Determining the source areas and other possible contributors on the basis of these data is not possible because of the small sample size of the water-quality dataset (both in number of samples and spatial distribution of samples). The different relations among the water-quality data indicate that the surface water in the different watersheds is likely influenced by differences in source areas, geochemical evolution, groundwater flow paths and residence time, local stratigraphy, or some combination thereof.

Texas↗

USGS2007

Separation of copper, iron, and zinc from complex aqueous solutions for isotopic measurement

The measurement of Cu, Fe, and Zn isotopes in natural samples may provide valuable information about biogeochemical processes in the environment. However, the widespread application of stable Cu, Fe, and Zn isotope chemistry to natural water systems remains limited by our ability to efficiently separate these trace elements from the greater concentrations of matrix elements. In this study, we present a new method for the isolation of Cu, Fe, and Zn from complex aqueous solutions using a single anion-exchange column with hydrochloric acid media. Using this method we are able to quantitatively separate Cu, Fe, and Zn from each other and from matrix elements in a single column elution. Elution of the elements of interest, as well as all other elements, through the anion-exchange column is a function of the speciation of each element in the various concentrations of HCl. We highlight the column chemistry by comparing our observations with published studies that have investigated the speciation of Cu, Fe, and Zn in chloride solutions. The functionality of the column procedure was tested by measuring Cu, Fe, and Zn isotopes in a variety of stream water samples impacted by acid mine drainage. The accuracy and precision of Zn isotopic measurements was tested by doping Zn-free stream water with the Zn isotopic standard. The reproducibility of the entire column separation process and the overall precision of the isotopic measurements were also evaluated. The isotopic results demonstrate that the Cu, Fe, and Zn column separates from the tested stream waters are of sufficient purity to be analyzed directly using a multicollector inductively coupled plasma mass spectrometer (MC-ICP-MS), and that the measurements are fully-reproducible, accurate, and precise. Although limited in scope, these isotopic measurements reveal significant variations in δ 65 Cu (− 1.41 to + 0.30‰), δ 56 Fe (− 0.56 to + 0.34‰), and δ 66 Zn (0.31 to 0.49‰) among samples collected from different abandoned mines within a single watershed. Hence, Cu, Fe, and Zn isotopic measurements may be a powerful tool for fingerprinting specific metal sources and/or examining biogeochemical reactions within fresh water systems.

Chemical Geology↗

USGS1998

Preliminary lithostratigraphy, interpreted geophysical logs and hydrogeologic characteristics of the 98th Street core hole, Albuquerque, New Mexico

Core samples, cuttings, and numerous geophysical logs obtained from the 1560 ft (475.5 m) core hole drilled at 98th Street on the west side of Albuquerque provide key stratigraphic and hydraulicproperty information for the upper clastic sediments of the Santa Fe Group, which form the principal aquifer in the region. The core hole and an adjacent water-level monitoring well were drilled cooperatively by the U.S. Geological Survey (USGS) and the City of Albuquerque and investigated in collaboration with the New Mexico Bureau of Mines and Mineral Resources and the New Mexico Office of the State Engineer to improve understanding of aquifer characteristics and controls on ground-water availability and quality. The 751.5 ft (229 m) of core samples recovered from the core hole are the only undisturbed samples of nonlithified sediments of the upper part of the Santa Fe Group that have been collected in this area. These samples have allowed us, for the first time, to directly observe and characterize the lithic and sedimentologic features of this part of the section, and to correlate the detailed geologic features with geophysical-log characteristics, magnetic susceptibility measurements, hydraulic variables, and trace-element geochemistry. The adjacent well was designed to be an areally representative ground-water level and water-quality monitoring well for the Santa Fe Group aquifer. This report chiefly addresses the lithologic, stratigraphic, and hydrogeologic features determined from the 98th Street core hole; other reports address related characteristics. Previous geologic studies predicted the stratigraphy at the site to be, from the land surface downward: 1) Quaternary alluvial and eolian valley-border sediments; 2) fluvial sand and gravel of the upper unit of the Santa Fe Group (Ceja Member of the Santa Fe Formation of Kelly, 1978; equivalent to the Sierra Ledrones Formation of Machette (1978a); 3) downward-fining basin-floor silty clay deposits and 4) fluvial sandy and silty facies of the middle unit of the Santa Fe Group (the Middle Red Member of Bryan and McCann, 1937, and Lambert, 1968). New geologic interpretations indicate that the drill site is in a fault block bounded by east-dipping normal faults and the oblique Atrisco-Rincon fault zone. Core-hole sampling recovered 760.6 ft (231.8 m) of core, in core segments 2.1-2.375 in. (5.3-6 cm) in diameter, and 0.2-10 ft (6.1 cm-3 m) long. The core hole was cased with centered 3-in. PVC casing, and is available for geophysical logging. The monitoring-well hole contains four piezometers at depths of 1544 ft (470.6 m), 1112 ft (338.9 m), 749 ft (228.3 m), and 458 ft (139.6 m). Sediments in the core are loose to weakly cemented gravel, sand, silt, and clay, and lithified sandstone. Laboratory analyses of particle-size distributions of 28 channel samples show that most silty sand samples are uniformly graded and poorly sorted; medium sand samples are moderately sorted. Six principal sediment types are used to describe the core; these sediment types are repeated in various combinations throughout the core and are used to define 22 lithologic units in the cored interval. The six principal sediment types contain sequences of beds having similar modal grain size and sedimentary structure, and are listed in decreasing abundance: 1) Silty fine sand, poorly sorted, containing a coarse silt matrix. Geophysical logs show highly variable baselines with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.12-2.25 g/cc and porosity values of 30-35 percent are typical. 2) Medium sand, moderately to poorly sorted. Geophysical logs show baselines of low variability with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.05-2.20 g/cc and porosity values of 30-35 percent are typical. 3) Clayey sandy silt, poorly sorted, locally microlaminated clay and silt, generally nonplastic. Geophysical logs show highly variable baselines with deflections that are related to sequences of clay and fine sand. Density values of 2.1-2.2 g/cc and porosity values of 30-40 percent are typical. 4) Silt and clay, characteristically red to reddish brown and medium to high plasticity, massive to indistinctly microlaminated. Geophysical logs show variable baselines with broad, high-amplitude compound spikes that are related to sequences of silt and fine sand. Density values of 2.12-2.25 g/cc and porosity values of >45 percent are typical. 5) Sand and gravel, poorly sorted. Geophysical logs show variable baselines with deflections that are related to sequences of silty and sorted fine sand. 6) Sandstone, fine-to-medium grained, poorly sorted, cemented chiefly by calcite, which fills the original pore space. Geophysical logs show density values >2.25 g/cc and porosity values <30 percent. The 22 lithologic units are correlated with recognized basin-floor fluvial lithofacies (Hawley, 1996), which include sand and gravel (lithofacies I), sand with lenses of pebbly sand, silt, and silty clay (lithofacies II), and interbedded sand, silt, and silty clay (modified lithofacies III, IV, IX). The sediments in the core hole are correlated with three informal lithostratigraphic units. The top unit, 0-19 ft (0-5.8 m) depth, consists of Quaternary eolian sand and valley-border alluvium. Coarsegrained deposits in the 19-97 ft (5.8-29.6 m) interval are correlated with the upper unit of the Santa Fe Group. The fine-grained section in the 97-787 ft (29.6-239.9 m) interval is correlated tentatively with the middle unit of the Santa Fe Group. This section contains thick sequences of laminated red and olivebrown clay and silt overbank deposits (441-787 ft) in the distinctive Atrisco member of Connell and others (1998). The Atrisco is correlated with fine-grained zones in numerous wells throughout the central Albuquerque metropolitan area, and is recognized as a zone that separates the upper Santa Fe aquifer from underlying middle Santa Fe deposits. The lower section of the middle unit of the Santa Fe, 787-1500 ft (239.9-457.2 m) depth, includes an upper sequence of moderately sorted channel-fill medium sand, and a lower sequence of sand, silt, and clay overbank deposits. The age of the cored interval is not known precisely. The upper Santa Fe gravel is related regionally to a through-flowing river system that was established in the Rio Grande rift valleys in Early Pliocene time, >4.5 MA. The middle Santa Fe unit is dated tentatively by correlation with a fossiliferous section, in which sandy beds that directly underlie the upper Santa Fe are Late Miocene (Hemphellian), 4.6- 8.9 MA. Further, the middle Santa Fe unit, with dominantly normal magnetic polarity, may have been deposited during closely spaced normal magnetic chrons 5.9-8.3 Ma. Four hydrostratigraphic units summarize the hydrogeologic framework for the 98th Street site: 1) Quaternary valley-border deposits, 2) upper Santa Fe sand and gravel deposits, 3) middle Santa Fe overbank deposits, and 4) middle Santa Fe channel-sand deposits. Empirical values of horizontal hydraulic conductivity estimated from core samples reveal a previously unknown contrast in hydraulic conductivity in the lowest two hydrostratigraphic units. Correlations among numerous wells show that the distinctively fine-grained Atrisco member, with estimated hydraulic conductivities (K) of <0.02-17 ft/day, is a laterally extensive barrier to vertical ground-water flow. The underlying unit that contains moderately sorted medium sand is a potential aquifer production zone that should be investigated further. Laboratory determination of vertical hydraulic conductivity values for fine-grained core samples range from 10 -2 to 10 -7 ft/day; recompacted sandy samples have K values of 1 to 10 -2 ft/day. Results of tests conducted with increasing effective stress show that K values of all samples decrease with decreasing porosity. Comparison of K values from laboratory, empirical, and calculated geophysical values shows discrepancies of 1-3 orders of magnitude (ft/day), indicating that additional analyses of core samples and geophysical data are necessary for future characterization of the Santa Fe Group aquifer.

New Mexico↗

USGS2010

Quality of groundwater at and near an aquifer storage and recovery site, Bexar, Atascosa, and Wilson Counties, Texas, June 2004-August 2008

The U.S. Geological Survey, in cooperation with the San Antonio Water System, did a study during 2004–08 to characterize the quality of native groundwater from the Edwards aquifer and pre- and post-injection water from the Carrizo aquifer at and near an aquifer storage and recovery (ASR) site in Bexar, Atascosa, and Wilson Counties, Texas. Groundwater samples were collected and analyzed for selected physical properties and constituents to characterize the quality of native groundwater from the Edwards aquifer and pre- and post-injection water from the Carrizo aquifer at and near the ASR site. Geochemical and isotope data indicated no substantial changes in major-ion, trace-element, and isotope chemistry occurred as the water from the Edwards aquifer was transferred through a 38-mile pipeline to the aquifer storage and recovery site. The samples collected from the four ASR recovery wells were similar in major-ion and stable isotope chemistry compared to the samples collected from the Edwards aquifer source wells and the ASR injection well. The similarity could indicate that as Edwards aquifer water was injected, it displaced native Carrizo aquifer water, or, alternatively, if mixing of Edwards and Carrizo aquifer waters was occurring, the major-ion and stable isotope signatures for the Carrizo aquifer water might have been obscured by the signatures of the injected Edwards aquifer water. Differences in the dissolved iron and dissolved manganese concentrations indicate that either minor amounts of mixing occurred between the waters from the two aquifers, or as Edwards aquifer water displaced Carrizo aquifer water it dissolved the iron and manganese directly from the Carrizo Sand. Concentrations of radium-226 in the samples collected at the ASR recovery wells were smaller than the concentrations in samples collected from the Edwards aquifer source wells and from the ASR injection well. The smaller radium-226 concentrations in the samples collected from the ASR recovery wells likely indicate some degree of mixing of the two waters occurred rather than continued decay of radium-226 in the injected water. Geochemical and isotope data measured in samples collected in May 2005 from two Carrizo aquifer monitoring wells and in July 2008 from the three ASR production-only wells in the northern section of the ASR site indicate that injected Edwards aquifer water had not migrated to these five sites. Geochemical and isotope data measured in samples collected from Carrizo aquifer wells in 2004, 2005, and 2008 were graphically analyzed to determine if changes in chemistry could be detected. Major-ion, trace element, and isotope chemistry varied spatially in the samples collected from the Carrizo aquifer. With the exception of a few samples, major-ion concentrations measured in samples collected in Carrizo aquifer wells in 2004, 2005, and 2008 were similar. A slightly larger sulfate concentration and a slightly smaller bicarbonate concentration were measured in samples collected in 2005 and 2008 from well NC1 compared to samples collected at well NC1 in 2004. Larger sodium concentrations and smaller calcium, magnesium, bicarbonate, and sulfate concentrations were measured in samples collected in 2008 from well WC1 than in samples collected at this well in 2004 and 2005. Larger calcium and magnesium concentrations and a smaller sodium concentration were measured in the samples collected in 2008 at well EC2 compared to samples collected at this well in 2004 and 2005. While in some cases the computed percent differences (compared to concentrations from June 2004) in dissolved iron and dissolved manganese concentrations in 11 wells sampled in the Carrizo aquifer in 2005 and 2008 were quite large, no trends that might have been caused by migration of injected Edwards aquifer water were observed. Because of the natural variation in geochemical data in the Carrizo aquifer and the small data set collected for this study, differences in major-ion and trace element data among the samples collected in 2004, 2005 and 2008 cannot be directly attributed to the ASR site operations. When the data were analyzed graphically, no appreciable differences in isotope concentrations were observed between samples collected in 2004 and 2008 from Carrizo aquifer wells, indicating that the Edwards aquifer source water might not have affected the isotope chemistry of the native Carrizo aquifer water near the sampled Carrizo wells by July 2008.

Texas↗

USGS1982

Geochemical orientation for mineral exploration in the Hashemite Kingdom of Jordan

This report is a supplement to previous accounts of geochemical exploration conducted in the Hashemite Kingdom of Jordan by the Natural Resources Authority of the Royal Government of Jordan and the U.S. Geological Survey. The field work on which this report is based was sponsored by the U.S. Agency for International Development, U.S. Department of State. Procedures used in collecting various kinds of rocks, ores, slags, eluvial and alluvial sediments, heavy-mineral concentrates, and organic materials for use as geochemical sample media are summarized, as are the laboratory procedures followed for the analysis of these sample materials by semiquantitative spectrographic, atomic absorption, fluorometric, and X-ray diffraction methods. Geochemical evaluations of the possibilities for economic mineral deposits in certain areas are presented. The results of these preliminary investigations open concepts for further use in geochemical exploration in the search for metallic mineral deposits in Jordan. Perhaps the most desirable new activity would be hydrogeochemical exploration for uranium and base metals, accompanied by interpretation of such remote-sensing data as results of airborne radiometric surveys and computer-enhanced LANDSAT imagery. For more conventional approaches to geochemical exploration, however, several fundamental problems regarding proper choice of geochemical sample media for different geologic and geographic parts of the Country must be solved before effective surveys can be made. The present results also show that such common geochemical exploration techniques as the determination of the trace-element contents of soils, plant ash, and slags have direct application also toward the resolution of several archaeological problems in Jordan. These include the relation of trace-elements chemistry of local soils to the composition of botanic remains, the trace-elements composition of slags to the technological development of the extractive metallurgy of copper and iron in the region, and the use of charcoal from slags for the C-14 dating of periods of archaeometallurgical activity. Less directly, interpretations based on the distribution in time and space of the archaeometallurgical activities of the region might add to the knowledge of early climatic conditions and vegetative cover of the area.

Open-File Report↗

USGS2008

Net Acid Production, Acid Neutralizing Capacity, and Associated Mineralogical and Geochemical Characteristics of Animas River Watershed Igneous Rocks Near Silverton, Colorado

This report presents results from laboratory and field studies involving the net acid production (NAP), acid neutralizing capacity (ANC), and magnetic mineralogy of 27 samples collected in altered volcanic terrain in the upper Animas River watershed near Silverton, Colo., during the summer of 2005. Sampling focused mainly on the volumetrically important, Tertiary-age volcanic and plutonic rocks that host base- and precious-metal mineralization in the study area. These rocks were analyzed to determine their potential for neutralization of acid-rock drainage. Rocks in the study area have been subjected to a regional propylitic alteration event, which introduced calcite, chlorite (clinochlore), and epidote that have varying amounts and rates of acid neutralizing capacity (ANC). Locally, hydrothermal alteration has consumed any ANC and introduced minerals, mainly pyrite, that have a high net acid production (NAP). Laboratory studies included hydrogen pyroxide (H2O2) acid digestion and subsequent sodium hydroxide (NaOH) titration to determine NAP, and sulfuric acid (H2SO4) acid titration experiments to determine ANC. In addition to these environmental rock-property determinations, mineralogical, chemical, and petrographic characteristics of each sample were determined through semiquantitative X-ray diffractometry (Rietveld method), optical mineralogy, wavelength dispersive X-ray fluorescence, total carbon-carbonate, and inductively coupled plasma?mass spectrometric analysis. An ANC ranking was assigned to rock samples based on calculated ANC quantity in kilograms/ton (kg/t) calcium carbonate equivalent and ratios of ANC to NAP. Results show that talus near the southeast Silverton caldera margin, composed of andesite clasts of the Burns Member of the Silverton Volcanics, has the highest ANC (>100 kg/t calcium carbonate equivalent) with little to no NAP. The other units found to have moderate to high ANC include (a) andesite lavas and volcaniclastic rocks of the San Juan Formation, west and northwest of the Silverton caldera, and (b) the Picayune Megabreccia Member of Sapinero Mesa Tuff along the western San Juan caldera margin. Sultan Mountain stock, composed of granitoid intrusive rocks, was shown to have low ANC and moderate NAP. Sequential leachate analyses on a suite of whole-rock samples from the current and a previous study indicate that host rock composition and mineralogy control leachate compositions. The most mafic volcanic samples had high leachate concentrations for Mg, Fe, and Ca, whereas silicic volcanic samples had lower ferromagnesiun compositions. Samples with high chlorite abundance also had high leachable Mg concentrations. Trace-element substitution, such as Sr for Ca in plagioclase, controls high Sr concentrations in those samples with high plagioclase abundance. High Ti abundance in leachate was observed in those samples with high magnetite concentrations. This is likely due to samples containing intergrown magnetite-ilmenite. Whole rocks having high trace-element concentrations have relatively high leachate trace-element abundances. Some lavas of the San Juan Formation and Burns Member of the Silverton Volcanics had elevated Zn-, Cd-, and Pb-leachate concentrations. Manganese was also elevated in one San Juan Formation sample. Other San Juan Formation and Burns Member lavas had low to moderate trace-element abundances. One sample of the pyroxene andesite member of the Silverton Volcanics had elevated concentrations for As and Mo. Most other pyroxene andesite member samples had low leachate trace-element abundances. Mine-waste-leachate analyses indicated that one mine-waste sample had elevated concentrations of Cu (1.5 orders of magnitude), Zn (1 order of magnitude), As (1 order of magnitude), Mo (1.5 to 2 orders of magnitude), Cd (1 to 2 orders of magnitude), and Pb (2 to 3 orders of magnitude) compared to whole rocks. These data indicate the importance of whole-rock geochemistry or leachate analys

Scientific Investigations Report↗

USGS1986

Water quality of Rhode Island streams

Water quality data collected from November 1979 through September 1983 at five stream stations within Rhode Island and one in Massachusetts show that concentrations of the common constituents were low. Mean water hardness at all sites was in the ' soft ' category. Sodium concentrations were less than 20 mg/L at two sites and less than 35 mg/L at the other sites. Mean nitrogen values for the two Blackstone River sites were in the range that could cause undesirable growths of aquatic plants. Mean phosphorus values exceeded the recommended limits for protection of aquatic life at four sites. Trace-element concentrations in the water were generally low. Those trace elements which were found in concentrations near or exceeding any standard or criterion include cadmium, chromium, lead, iron, and manganese. High concentrations of several trace elements were found in the bottom materials at several sites. The bottom materials also contained pesticides and organic chemicals including aldrin, chlordane, DDD, DDE, DDT, dieldren, endosulfan , endrin, heptachlor, Mirex, and PCB. Results of trend analysis of total phosphorus, total nitrogen, and specific conductance show a downward trend in phosphorus at two sites; an upward trend in nitrogen at one site; and one downward trend and one upward trend in specific conductance. (USGS)

Water-Resources Investigations Report↗

USGS2025

Groundwater hydrology, groundwater and surface-water interactions, water quality, and groundwater-flow simulations for the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado, 2017–19

In 2017, the U.S. Geological Survey, in cooperation with the Upper Arkansas Water Conservancy District, began a study to provide a comprehensive analysis of the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado. The study included collection of data pertaining to groundwater hydrology, groundwater and surface-water interactions, and water quality in the alluvial aquifer. In addition to providing foundational information on the hydrology of the alluvial aquifer, a numerical groundwater-flow model was developed to estimate the potential effects of additional storage of groundwater in the alluvial aquifer. Groundwater-level elevation data from 30 wells were used to estimate groundwater-flow directions in the alluvial aquifer, which were generally from the southwest to northeast, away from the Sangre de Cristo Mountains and towards perennial streams in the center of the valley. Although some seasonal variation was apparent in groundwater-level elevation records, no statistically significant seasonal trends were indicated. Statistically significant long-term trends were indicated in groundwater-level elevation records for 8 of the 30 wells, and of these wells with statistically significant trends, all but 1 indicated a negative trend of groundwater-level elevations. Spatial evaluation of wells with statistically significant negative groundwater-level elevation trends showed many are in areas of denser well drilling for domestic or other uses, indicating increasing groundwater use could potentially be causing groundwater-level elevation declines. There were instances of wells with no statistically significant groundwater-level elevation trends also located in areas of greater density of well completions. Additional investigations may be necessary to more fully characterize the processes responsible for negative groundwater-level elevation trends. Streamflow gain or loss calculations were completed for low flow in 2017–19 and for high flow in 2018 in nine reaches of streams within the study area. Stream reaches of the upper Texas Creek, upper Grape Creek, upper-middle Grape Creek, and Taylor Creek displayed consistent streamflow loss in each period from 2017 to 2019. These stream reaches represent long-term sources of recharge to the alluvial aquifer. Streamflow gain or loss varies through time in other stream reaches (lower Texas Creek, lower-middle Grape Creek, lower Grape Creek below Westcliffe, and lower Grape Creek above DeWeese Reservoir). The temporally variable behavior indicates these stream reaches may be sources of groundwater recharge or areas of groundwater discharge, likely depending on temporal dynamics between the elevation of the water table and the stream. Water-quality samples were collected from 10 groundwater wells and 10 stream sites during September through November 2019. All groundwater and stream samples were analyzed for major and trace elements and stable isotopes of water. A subset of groundwater samples was also analyzed for the environmental tracers sulfur hexafluoride, tritium, and noble gases. Comparison of water-quality results to U.S. Environmental Protection Agency drinking water-quality standards indicated no constituents exceeded primary standards for human health. Spatial evaluation of water quality indicated the concentrations of various constituents are likely controlled by groundwater and surface-water interactions and by spatial variability in bedrock geology underlying the alluvial aquifer. Specifically, streams shown to gain from groundwater had water chemistry constituent compositions similar to groundwater, whereas streams exiting the Sangre de Cristo Mountains tended to have compositions consistent with snowmelt. Groundwater geochemistry appeared to be partially controlled by oxidation-reduction processes and by proximity to igneous rocks in the Wet Mountains. Environmental tracers used to estimate groundwater age indicated all sampled groundwater contained tracers representing modern recharge (approximately less than 65 years old) but mixing of premodern recharge (approximately more than 65 years old) also occurs. Spatial evaluation of environmental tracers indicated large faults may be conduits for upwelling of older groundwater. No trends were observed in groundwater age with well depth, indicating all sampled wells are located within the zone of active groundwater flow. The presence of modern groundwater in wells with statistically significant negative groundwater-level elevation trends indicates groundwater storage depletions may be partially offset by capture of modern recharge. Repeated sampling of groundwater age would be necessary, however, to determine if any trends in groundwater age exist, which may indicate changing groundwater recharge, storage, or discharge. Additional investigations could also consider quantifying groundwater age in deeper wells to more fully define the depth of active groundwater flow. A numerical groundwater-flow model was developed to estimate components of the water budget, simulate groundwater and surface-water interactions, and evaluate the potential effects of aquifer storage and recovery. Simulated groundwater-level elevations from the calibrated groundwater-flow model are similar to the observed pattern of groundwater-level elevations with higher elevations in the western part of the study area along the Sangre de Cristo Mountains. Simulated water-budget components indicate most of the recharge to the alluvial aquifer is derived from streamflow losses, which is consistent with observations of losing streams along the mountain front. The largest groundwater discharge component of the alluvial aquifer was to streams in the center of the valley, where observations of stream gain or loss indicated the predominance of gaining conditions. Comparison of groundwater and surface-water interactions between the calibrated groundwater-flow model for 2000-19 (the base-case model) and a simulation including additional recharge, representing potential aquifer storage and recovery operations, indicated the additional recharge distributed throughout the area had minimal effects on streamflow in the nearby Grape Creek. An analysis of subregional groundwater budgets showed approximately 54 percent of the additional recharge flowed back to nearby Grape Creek, and the other 46 percent was distributed laterally into adjacent cells in the alluvial aquifer. The comparison of simulations and subregional water budget show the additional recharge did not substantially alter groundwater-level elevations or basin wide groundwater storage. Although the analysis of additional recharge provided in the numerical groundwater-flow model considers only one of many possible recharge scenarios, the model provides a useful tool that could be modified for various scenarios to understand potential effects of managed aquifer recharge.

Colorado↗