Search USGS⌕ Search

SEARCH · Search USGS

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
USGS1994

Ground-water quality and geochemistry, Carson Desert, western Nevada

Aquifers in the Carson Desert are the primary source of drinking water, which is highly variable in chemical composition. In the shallow basin-fill aquifers, water chemistyr varies from a dilute calcium bicarbonate-dominated water beneath the irrigated areas to a saline sodium chloride- dominated water beneath unirrigated areas. Water samples from the shallow aquifers commonly have dissolved solids, chloride, magnesium, sulfate, arsenic, and manganese concentrations that exceed State of Nevada drinking-water standards. Water in the intermediante basin-fill aquifers is a dilute sodium bicarbonate type in the Fallon area and a distinctly more saline sodium chloride type in the Soda Lake-Upsal Hogback area. Dissolved solids, chloride, arsenic, fluoride, and manganese concen- trations commonly exceed drinking-water standards. The basalt aquifer contains a dilute sodium bicarbonate chloride water. Arsenic concentrations exceed standards in all sampled wells. The concen- trations of major constituents in ground water beneath the southern Carson Desert are the result of evapotranspiration and natural geochemical reactions with minerals derived mostly from igneous rocks. Water with higher concentrations of iron and manganese is near thermodynamic equilibrium with siderite and rhodochrosite and indicates that these elements may be limited by the solubility of their respective carbonate minerals. Naturally occurring radionuclides (uranium and radon-222) are present in ground water from the Carson Desert in concen- tratons higher than proposed drinking-water standards. High uranium concentrations in the shallow aquifers may be caused by evaporative concentration and the release of uranium during dissolution of iron and manganese oxides or the oxidation of sedimentary organic matter that typically has elevated uranium concentrations. Ground water in the Carson Desert does not appear to have be contaminated by synthetic organic chemicals.

Open-File Report↗
USGS1984

Reconnaissance geology of the Al Mukhul Quadrangle, sheet 26/42 B, Kingdom of Saudi Arabia

The Al Makhul quadrangle (26/42 B) lies in the northern part of the Arabian Shield between lat 26°30' and 27°00' N. and long 42°30' and 43°00' E. Amphibolite, the oldest metamorphic rock exposed in the quadrangle, crops out in a restricted area in the south-central part of the quadrangle. Younger, weakly metamorphosed rhyolite, basalt, and graywacke sandstone on the west edge of the quadrangle are correlated with lithologically similar rocks exposed to the southwest that comprise the Hibshi formation. The Turmus formation, located in the north-central part of the quadrangle, is composed of weakly metamorphosed andesite flow rocks, andesitic agglomerate, and related volcanic graywacke and is similar in metamorphic grade, age relations with intrusive rocks, and structural character to the rocks on the west edge of the quadrangle; it is thought to be approximately coeval with them. Seven plutonic units, ranging in composition from gabbro and diorite to alkali-feldspar granite, intrude the weakly metamorphosed rocks. Some of these plutons are offset along a northwest-trending fault of the Najd fault system but their emplacement postdates all other major tectonic episodes in the area. The weakly metamorphosed rocks were deposited on an erosional surface underlain by a pluton composed of quartz diorite. Quaternary alkali basalt crops out in the northwest part of the quadrangle. These rocks are at the southeast edge of Harrat al Hutaymah, a basalt field composed of flow rocks, tuff rings, and cinder cones. Mineral potential in the quadrangle is low. At a very small prospect pit in the north-central part of the quadrangle, massive, milky quartz veins cutting weakly metamorphosed volcanogenic sedimentary rocks are stained blue and green by copper minerals. A previously reported mine site in the southern part of the quadrangle was not relocated.

Open-File Report↗
USGS1984

Sm-Nd, K-Ar and petrologic study of some kimberlites from eastern United States and their implication for mantle evolution

We provide new data on Sm-Nd systematics, K-Ar dating and the major element chemistry of kimberlites from the eastern United States (mostly from central New York State) and their constituent mineral phases of olivine, clinopyroxene, garnet, phlogopite and perovskite. In addition, we report Nd-isotopes in a few kimberlites from South Africa, Lesotho and from the eastern part of China. The major element compositions of the New York dike rocks and of their constituent minerals including a xenolith of eclogite are comparable with those from the Kimberley area in South Africa. The K-Ar age of emplacement of the New York dikes is further established to be 143 Ma. We have analyzed the Nd-isotopic composition of the following kimberlites and related rocks: Nine kimberlite pipes from South Africa and Lesotho, two from southern India; one from the U.S.S.R., fifteen kimberlite pipes and related dike rocks from eastern and central U.S. and two pipes from the Shandong Province of eastern China. The age of emplacement of these kimberlites ranges from 1300 million years to 90 million years. The initial Nd-isotopic compositions of these kimberlitic rocks expressed as e{open}NdIwith respect to a chondritic bulk-earth growth-curve show a range between 0 and +4, with the majority of the kimberlites being in the range 0 to +2. This range is not matched by any other suite of mantle-derived igneous rocks. This result strengthens our earlier conclusion that kimberlitic liquids are derived from a relatively primeval and unique mantle reservoir with a nearly chondritic Sm/Nd ratio. ?? 1984 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS1990

Chemistry and mineralogy of natural bitumens and heavy oils and their reservoir rocks from the United States, Canada, Trinidad and Tobago, and Venezuela

Twenty-one samples from natural bitumen and heavy oil deposits in seven States of the United States and six samples from outside the United States form the basis of this initial study. This Circular gives the mineral content of the reservoir rock, the trace-element distribution in the reservoir rock and hydrocarbons, and the composition of the heavy oil and natural bitumen. The reservoir rock and sediment residues from California contain more trace-element maximum amounts than any of the other rock samples. These relatively high concentrations of trace elements may be due, in part, to the low quartz content of the rock and to the presence of heulandite, cristobalite, siderite, and pyrite. The reservoir rock and sediment residues from Oklahoma contain more minimum amounts of trace elements than any of the other rock samples. This pattern probably results from the large amount of quartz in four of the samples and a large amount of calcite in the other sample. The maximum and minimum amounts of trace elements in the bitumen and heavy oil do not correlate with those in the reservoir rocks. The bitumen from Utah contains the greatest number of trace-element maxima, whereas there is no trend in the trace-element minima in the bitumen and heavy oil.

Circular↗
USGS1994

Hydrogeology of the Chickasaw National Recreation Area, Murray County, Oklahoma

The Travertine District (Park) of the Chickasaw National Recreation Area, operated and maintained by the National Park Service, is near the City of Sulphur in south-central Oklahoma. The Park was established in 1902 because of its unique hydrologic setting, which includes Rock Creek, Travertine Creek, numerous mineralized and freshwater springs, and a dense cover of riparian vegetation. Since the turn of the century several flowing artesian wells have been drilled within and adjacent to the Park. Discharge from many of these springs and the numbers of flowing wells have declined substantially during the past 86 years. To determine the cause of these declines, a better understanding of the hydrologic system must be obtained. The U.S. Geological Survey, in cooperation with the National Park Service, has appraised hydrologic information obtained for the Park from several studies conducted during 1902-87. The principal geologic units referred to in this report are the Arbuckle Group and the overlying Simpson Group. These rocks are of Upper Cambrian to Middle Ordovician age and are composed of dolomitic limestone, with some sandstones and shales in the Simpson Group. Surface geologic maps give a general understanding of the regional subsurface geology, but information about the subsurface geology within the Park is poor. The Simpson and Arbuckle aquifers are the principal aquifers in the study area. The two aquifers are not differentiated readily in some parts of the study area because of the similarity of the Simpson and Arbuckle rocks; thus, both water-bearing units are referred to frequently as the Arbuckle-Simpson aquifer. The aquifers are confined under the Park, but are unconfined east and south of the Park. Precipitation on the outcrop area of the Arbuckle aquifer northeast and east of the Park recharges the freshwater springs (Antelope and Buffalo Springs) near the east boundary of the Park. The source of water from mineralized springs located in the central part of the Park, and flowing wells within and north of the Park, is believed to be a mix of waters from rocks of the Arbuckle and Simpson Groups. The source of water from two highly mineralized springs, Bromide and Medicine, that ceased to flow in the early 1970’s is believed to be from the Simpson Group. Water-quality characteristics reflect the sources of ground water in the study area. The highly mineralized springs near the western end of the Park are a sodium chloride type with dissolved solids greater than 4,500 mg/L. The freshwater springs near the eastern end of the Park are a calcium bicarbonate type with total dissolved solids of less than 400 mg/L. Flow from the artesian wells has declined substantially during the past 86 years and the wells are estimated to currently discharge only about 10 percent of the total flow reported in 1939. The depletion is believed to be caused by a gradual lowering of the hydraulic head within the aquifer. The influence on the hydrologic system of local municipal and industrial pumping from the Arbuckle-Simpson aquifer is difficult to discern because the system is much more sensitive to precipitation than to pumpage. Ground-water levels and spring flows in this region respond rapidly to precipitation. The effects of withdrawals from the City of Sulphur and Oklahoma Gas and Electric Company power-plant water-well fields are not discernible at wells and springs. The hydrologic system may be influenced by pumping, particularly during extended dry periods of several years, but the impact of pumping on the system cannot be determined without further investigation.

Oklahoma↗
USGS1994

Mineral-resource assessments in Alaska; background information to accompany maps and reports about the geology and undiscovered-mineral-resource potential of the Mount Katmai Quadrangle and adjacent parts of the Naknek and Afognak quadrangles, Alaska Peninsula

Geologic and geochemical field studies were carded out from 1983 to 1987 in the Mount Katmai l?x2 ? quadrangle and adjoining region, at the northeast end of the Alaska Peninsula. The region is nearly entirely within Katmai National Park and Preserve and has had almost no mineral production, so prior to this study there were few data by which to assess the mineral potential of the region. This report describes the folio of publications that have resulted from the study: geologic maps, geochemical results, fossil identifications, radiometric rock ages, and an assessment of the undiscovered-mineral-resource potential of the region. The Katmai region is inferred to potentially have three types of undiscovered mineral deposits: porphyry copper (molybdenum), precious-metal vein, and hot-springs gold. These deposit types occur elsewhere on the Alaska Peninsula in similar geologic units. Evidence suggesting their occurrence in the Katmai region is the presence of trace amounts of metals typically associated with these kinds of deposits in bedrock of certain tracts and in sediments of streams draining those tracts. Magma to provide heat, fractures to provide pathways for mineralizing fluids, and altered rock are required by genetic models of these deposit types. Such features do occur in the Katmai tracts. Confirmation of any mineral deposit in the Katmai region requires detailed follow-up sampling and acquisition of subsurface information, which is beyond the scope of this study. However, producing porphyry deposits are unknown elsewhere on the Alaska Peninsula in similar rocks, so if any such deposits occur in the Katmai region, they are likely to be few in number. Conversely, vein deposits are typically small in size so there may be several of such deposits. The properties and thermal history of the sedimentary rocks that could serve as reservoirs for oil or gas are unfavorable in adjacent regions. Thus the potential of the Katmai region for producible quantities of fossil fuels is low. In theory the region has shallow concentrations of geothermal fluids, but specific evidence for their presence is obscured by heavy precipitation and cold young rocks or deposits. Small volumes of coal occur at tidewater sites on the Pacific coast.

Circular↗
USGS2021

Improved Automated Identification and Mapping of Iron Sulfate Minerals, Other Mineral Groups, and Vegetation using Landsat 8 Operational Land Imager Data, San Juan Mountains, Colorado, and Four Corners Region

Multispectral remote sensing data acquired by the Landsat 8 Operational Land Imager (OLI) sensor were analyzed using a new, automated technique to generate a map of exposed mineral and vegetation groups in the western San Juan Mountains, Colo., and the Four Corners Region of the United States. Band ratio results were combined into displayed mineral and vegetation groups using Boolean algebra. New analysis logic has been implemented to exploit the coastal aerosol band in Landsat 8 OLI data and identify concentrations of iron sulfate minerals. These may indicate the presence of near-surface pyrite, which can be a potential nonpoint source of acid rock drainage. Zoned occurrences of iron sulfate minerals in areas surrounding and down gradient of known sources of pyrite have been mapped using this technique. They show high correlation with occurrences of jarosite-bearing mineral assemblages, as mapped using airborne imaging spectrometer data and supporting field verification surveys. Mapping the occurrence of iron sulfate minerals produced by the weathering and oxidation of pyrite in exposed hydrothermally altered rocks can also provide an important indicator of the genetic environment of alteration and the associated mineral deposit type. The automated analysis methodology is being employed to rapidly and cost-effectively generate maps of large regions of the United States in support of U.S. Geological Survey mineral resource and mineral-environmental assessments. This map, which includes the ERDAS IMAGINE thematic raster format in the data release, has been attributed by pixel value with mineral and vegetation group classification data, which can be queried in most image processing and GIS software packages.

Colorado, Utah↗
USGS2014

Regional mapping of hydrothermally altered igneous rocks along the Urumieh-Dokhtar, Chagai, and Alborz Belts of western Asia using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and Interactive Data Language (IDL) logical operators: a tool for porphyry copper exploration and assessment

Regional maps of phyllic and argillic hydrothermal alteration were compiled using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and logical operator algorithms. The area mapped extends from northwestern Iran to southeastern Pakistan and includes volcanic and magmatic arcs that make up the Urumieh-Dokhtar volcanic belt (UDVB), the Chagai volcanic belt (CVB), and the central part of the Alborz magmatic belt (AMB). The volcanic belts span the Zagros-Makran transform zone and the present day Baluchistan (Makran) volcanic arc. ASTER visible near infrared (VNIR) data contain three bands between 0.52 and 0.86 micrometers (μm) and the short-wave infrared (SWIR) data consist of six bands spanning 1.6 to 2.43 μm with 15-meter (m), and 30-m resolution, respectively. During the 8-year project, three different calibration methods were used to correct ASTER SWIR anomalies and produce ASTER calibrated reflectance data, which were then used to map hydrothermally altered rocks. Logical operators, used to map hydrothermally altered rocks, perform multiple band ratios and thresholds that can be applied to multiple ASTER scenes using a single algorithm, thus eliminating separate production and application of vegetation and dark pixel masks. Argillic and phyllic band ratio logical operators use band ratios that define the 2.17- and 2.20-μm absorption features to map kaolinite and alunite, typical in argillized rocks, and muscovite, which is a common mineral in phyllic alteration. Band thresholds for ratios in argillic and phyllic logical operator algorithms were determined by mapping known argillic and phyllic rocks at a calibration test site in Cuprite, Nevada, in the United States. The regional argillic and phyllic hydrothermal alteration map and geologic and deposit maps of the study area illustrate that distinct patterns of altered rocks are typically associated with certain types of mineral deposits. The central part of the UDVB contains numerous circular to elliptical patterns (1 to 5 kilometers in diameter) of mapped phyllic- and argillic-altered rocks associated with Eocene to Miocene intrusive igneous rocks, some of which host known porphyry copper deposits such as at Meiduk, Sar Cheshmeh, and Seridune in Iran. The Zagros-Makran transform zone and areas adjacent to the Saindak porphyry deposit and Taftan Volcano contain primarily phyllic-altered rocks that form linear patterns associated with extensive faulting and fractures indicative of epithermal and (or) polymetallic vein deposits. The ASTER alteration map and corresponding geologic maps were used to select circular to elliptical patterns of argillic- and phyllic-altered volcanic and intrusive rocks as potential porphyry copper sites. One hundred and seventy eight potential porphyry copper sites were mapped along the UDVB, and 23 sites were mapped along the CVB. The potential sites were selected to assist in further exploration and assessments of undiscovered porphyry copper deposits.

Scientific Investigations Report↗
USGS2023

Tungsten resources of the northern Rocky Mountains, Montana and Idaho— A synthesis and quantitative assessment of skarn-hosted resources

Mineral resource assessments performed by the U.S. Geological Survey provide a synthesis of available information about the location of known and suspected mineral deposits. This study focuses on skarn-hosted tungsten resources in the northern Rocky Mountain region of east-central Idaho and western Montana which have seen moderate tungsten trioxide production in the past from a variety of mineralization styles including skarn, vein and replacement, and wolframite-quartz veins. The area’s geology is dominated by large Cretaceous and Tertiary plutons that are emplaced into a belt of Mesoproterozoic to Permian sedimentary rock and affected by tectonism related to the Sevier and later Laramide orogenies. Known tungsten skarn mineral sites are associated with contacts between Cretaceous plutons and calcareous and argillaceous sedimentary or metasedimentary rocks, including two skarn deposits in Montana (Calvert and Browns Lake) that are consistent with an updated grade and tonnage model. This study (1) delineates permissive tracts where undiscovered tungsten skarn deposits may occur within 1 kilometer of the surface; (2) presents a tungsten mineral site dataset from a variety of public sources; (3) evaluates currently available geochemical, geophysical, and radiometric age data in support of tract delineation; (4) provides probabilistic estimates of the amount of tungsten and tungsten-mineralized rock that could be contained in undiscovered deposits within one major tract; (5) estimates the value of total undiscovered deposits using economic filter analysis; and (6) provides a synthesis of metallogenic controls on regional tungsten skarn and granitoid-related mineral deposits. Two permissive tracts were delineated: the Great Falls tectonic zone (GFTZ)-Cretaceous tract, for which a quantitative assessment was performed, and the Bitterroot tract, which was assessed in a qualitative manner. The quantitative three-part assessment, conducted in August 2019, indicates that undiscovered tungsten resources might exist in skarn-type deposits within the study area. Using a negative binomial function, a mean of 4 undiscovered deposits was calculated from panel estimates. Simulation results that combine an updated grade and tonnage model with estimates of undiscovered deposits include the amounts of ore and contained tungsten trioxide at different levels of uncertainty. A mean of 250,000 metric tons and median of 200,000 metric tons contained tungsten trioxide was calculated for the undiscovered deposits within the GFTZ-Cretaceous tract. The value of undiscovered deposits was estimated using a new economic filter that considers factors such as mine type, deposit depth, deposit geometry, metallurgical recovery rate, cutoff grade, and tract area. A review of the regional Archean to Paleogene geology suggests that ore metal (copper, molybdenum, and tungsten) variations in intrusion-related deposits of Montana and Idaho may be controlled by a number of factors including the age and composition of underlying basement terranes, depth of emplacement, pluton chemistry and degree of fractionation, redox conditions, and aqueous fluid-melt partition coefficients.

Idaho, Montana↗
USGS1983

A preliminary evaluation of stream sediment sampling for the detection of cobalt mineralization in the Bou Azzer District, Morocco

Analyses of 28 stream sediment samples collected in the Bou Azzer district, Morocco, show that this sampling technique may be useful in locating the cobalt arsenide mineralization that exists in this area. The absence of exceptionally high values of cobalt and arsenic, the nearly lognormal distribution of cobalt values, and the lack of correlation between the highest values of cobalt and arsenic were unanticipated results that do not support the use of this sampling technique. However, highest values of several metals, including cobalt, were associated with an identified area of cobalt mineralization, and high cobalt was present near a second area in which cobalt mineralization is suspected. Although probably mostly reflecting the geochemistry of unexposed ultramafic rocks, the association of these metals with mineralization shows that this type of sampling can independently locate areas of known or potential cobalt mineralization.

Open-File Report↗
USGS2005

Lead isotopic compositions of soil and near-surface till profiles from a watershed containing arsenic-enriched groundwater in coastal Maine

Lead isotope compositions of soils and near-surface tills from an area of coastal Maine known to have groundwater with anomalously high arsenic contents were measured in order to determine the source of the lead and, by inference, possible sources of arsenic. Five soil and till sites were selected for detailed chemical and isotopic analysis. To construct profiles of the soil and till horizons, five samples were collected at 10-cm intervals from the surface to the base of each horizon. Total lead and arsenic concentrations and lead isotopic compositions were measured for 48 leaches and bulk residues. The soils and tills are underlain by sulfidic schists of the Penobscot Formation. Several generations of minerals containing arsenic and lead exist in the regional bedrock, including rock-forming silicates (feldspar and micas), sulfide minerals formed during diagenesis (for example, arsenic-rich pyrite), and sulfide and oxide minerals that formed as a result of Silurian metamorphic and igneous events (for example, arsenopyrite, galena, iron-oxides, and arsenic-sulfides). A young group of secondary minerals (for example, iron-hydroxides, arsenic-hydroxides, lead-sulfate, and arsenic-jarosite) formed from recent weathering and pedogenic processes.

Maine↗
USGS1970

Mineral resources of the southern half of Zone III Santander, Norte de Santander and Boyaca, Colombia

The areas covered by this report lies in the eastern Cordillera of the Colombian Andes in the region around Bucaramanga. This part of the eastern Cordillera consists of a structurally complex core of metamorphic and igneous rocks of Precambrian to Mesozoic age, flanked to east and west by faulted and folded sedimentary strata of late Paleozoic to Tertiary age. Infaulted blocks of sedimentary rocks are locally present in the massif. Unconsolidated deposits of Quaternary age, primarily terraced alluvium, are 10cally extensive in valleys on the flanks of the range. The crystalline central core of the range is called the Santander massif. In it are located the principal sold deposits and scattered deposits of copper, lead, zinc, and fluorite. The sedimentary rocks flanking the massif contain significant deposits of phosphate rock and gypsum, as well as other nonmetallic industrial minerals such as limestone, barite, glass sand, and coal. A belt of lead-zinc prospects in carbonate and sandstone beds of Cretaceous age on the east side of the range warrants further investigation. Gold and silver are the only important metallic minerals that have been produced in the Santander massif. Mining dates back to colonial and possibly to pre-colonial times and continues on a small scale at present. The California and Vetas district was the main area of investigation of metallic minerals during the present project. Results of geochemical sampling of stream sediments and assays of vein material indicate that the main potential of the area is in gold with lesser potentials in copper, lead, zinc, and silver. Mineralization of the district is probably younger than Early Cretaceous. Although no copper minerals have been mined elsewhere in the massif, small amounts of copper minerals in various rocks in scattered areas is revealed by green and blue stains of copper carbonates and sulfates. Deposits of greatest areal extent are in arkosic conglomeratic beds of the Giron Formation. These are being explored and sampled at the present time (1969). A little lead has been mined and smelted in the past but operations were on a very small scale and of short duration. Small amounts of lead, zinc, and copper minerals accompany dolomite replacement of Cretaceous limestone in a few scattered places, and several promising prospects are being investigated by means of trenches and drilling. One magnetite and several hematite prospects were examined but none offers any potential for economic development. Thick beds of gypsum in Lower Cretaceous limestone on Mesa de Los Santos, south of Bucaramanga are being quarried from outcrops for use in cement manufacture. The deposit was discovered shortly before the present project began, and although its extent beneath overlying strata is not yet determined by drilling, it appears to be in a small evaporite basin of about three kilometers in radius. Reserves of gypsum are large, but future development will have to be by underground mining. Outcrops of Cretaceous limestone of high purity are widespread and are more than adequate to meet all demands, which at present are for cement and calcined lime, road construction material, and to a small extent for agricultural lime and polished decorative stone. Upper Paleozoic limestone of the Diamante Formation crops out in a few places; it has been used near Bucaramanga for cement manufacture. Marble is present in several localities of the Santander massif in Lower Paleozoic and Devonian rocks. Impurities, fractures, and solution cavities render most of it unsuitable for decorative purposes, but selected parts are used in floor tile and terrazo. Recrystallized limestone of the Diamante Formation in the same area, usually referred to as marble, is of uniform high purity throughout a thick and uninterrupted section, and offers a good source of limestone raw material. A little is now used for agricultural lime. The potential of this resource has not been fully evalua

Open-File Report↗
USGS2005

Alunite in the Pascua-Lama high-sulfidation deposit: Constraints on alteration and ore deposition using stable isotope geochemistry

The Pascua-Lama high-sulfidation system, located in the El Indio-Pascua belt of Chile and Argentina, contains over 16 million ounces (Moz) Au and 585 Moz Ag. The deposit is hosted primarily in granite rocks of Triassic age with mineralization occurring in several discrete Miocene-age phreatomagmatic breccias and related fracture networks. The largest of these areas is Brecha Central, which is dominated by a mineralizing assemblage of alunite-pyrite-enargite and precious metals. Several stages of hydrothermal alteration related to mineralization are recognized, including all types of alunite-bearing advanced argillic assemblages (magmatic-hydrothermal, steam-heated, magmatic steam, and supergene). The occurrence of alunite throughout the paragenesis of this epithermal system is unusual and detailed radiometric, mineralogical, and stable isotope studies provide constraints on the timing and nature of alteration and mineralization of the alunite-pyrite-enargite assemblage in the deposit. Early (preore) alteration occurred prior to ca. 9 Ma and consists of intense silicic and advanced argillic assemblages with peripheral argillic and widespread propylitic zones. Alunite of this stage occurs as fine intergrowths of alunite-quartz ± kaolinite, dickite, and pyrophyllite that selectively replaced feldspars in the host rock. Stable isotope systematics suggest a magmatic-hydrothermal origin with a dominantly magmatic fluid source. Alunite is coeval with the main stage of Au-Ag-Cu mineralization (alunite-pyrite-enargite assemblage ore), which has been dated at approximately 8.8 Ma. Ore-stage alunite has an isotopic signature similar to preore alunite, and Δ 34 S alun-py data indicate depositional temperatures of 245° to 305°C. The δ D and δ 18 O data exclude significant involvement of meteoric water during mineralization and indicate that the assemblage formed from H 2 S-dominated magmatic fluids. Thick steam-heated alteration zones are preserved at the highest elevations in the deposit and probably formed from oxidation of H 2 S during boiling of the magmatic ore fluids. Coarsely crystalline magmatic steam alunite (8.4 Ma) is restricted to the near-surface portion of Brecha Central. Postmineral alunite ± jarosite were previously interpreted to be supergene crosscutting veins and overgrowths, although stable isotope data suggest a mixed magmatic-meteoric origin for this late-stage alteration. Only late jarosite veinlets (8.0 Ma) associated with fine-grained pseudocubic alunite have a supergene isotopic signature. The predominance of magmatic fluids recorded throughout the paragenesis of the Pascua system is atypical for high-sulfidation deposits, which typically involve significant meteoric water in near-surface and peripheral alteration and, in some systems, even ore deposition. At Pascua, the strong magmatic signature of both alteration and main-stage (alunite-pyrite-enargite assemblage) ore is attributed to limited availability of meteoric fluids. This is in agreement with published data for the El Indio-Pascua belt, indicating an event of uplift and subsequent pediment incision, as well as a transition from semiarid to arid climatic conditions, during the formation of the deposit in the mid to late Miocene.

Economic Geology↗
USGS2013

Porphyry copper assessment of Europe, exclusive of the Fennoscandian Shield: Chapter K in Global mineral resource assessment

The U.S. Geological Survey (USGS) collaborated with European geologists to assess resources in porphyry copper deposits in Europe, exclusive of Scandinavia (Sweden, Denmark, Norway, and Finland) and Russia. Porphyry copper deposits in Europe are Paleozoic and Late Cretaceous to Miocene in age. A number of the 31 known Phanerozoic deposits contain more than 1 million metric tons of contained copper, including the Majdanpek deposit, Serbia; Assarel, Bulgaria; Skouries, Greece; and Rosia Poeni, Romania. Five geographic areas were delineated as permissive tracts for post-Paleozoic porphyry copper deposits. Two additional tracts were delineated to show the extent of permissive igneous rocks associated with porphyry copper mineralization related to the Paleozoic Caledonian and Variscan orogenies. The tracts are based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 4,000 to 93,000 square kilometers. Although maps at a variety of different scales were used in the assessment, the final tract boundaries are intended for use at a scale of 1:1,000,000. The post-Paleozoic deposits in Europe all formed in conjunction with the tectonic evolution of southern Europe as the former Tethyan Ocean closed by convergence of the African and Arabian Plates with Europe, accompanied by accretion of microcontinents to the southern Eurasian Plate and development and demise of magmatic arcs and ocean basins. Many of the deposits formed in extensional or post-collisional settings; these tectonic environments are increasingly being recognized as environments where porphyry copper deposits occur. Probabilistic estimates of undiscovered porphyry copper deposits were made for four Phanerozoic permissive tracts; the other tracts are discussed qualitatively. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for the four tracts. These estimates were then combined with grade and tonnage models using Monte Carlo simulation to generate probabilistic estimates of amounts of in-place undiscovered resources. Additional resources that may be present in extensions of known deposits were not evaluated. Assessment results are reported in tables and graphs as expected amounts of metal and rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each commodity for each tract. This assessment estimated a mean of 14 undiscovered porphyry copper deposits within the four permissive tracts for which estimates were made. On the basis of global grade and tonnage models, mean (arithmetic) estimated resources that could be associated with undiscovered deposits are about 46 million metric tons of copper and about 2,600 metric tons of gold, as well as byproduct molybdenum and silver. Reliable reported identified resources for the 27 deposits in the assessed areas total about 44 million metric tons of copper and about 2,300 metric tons of gold. Exploration for gold-rich porphyry systems is ongoing in some parts of historical copper mining districts in central Europe and in northwesternmost (European) Turkey. Political and social conflicts, environmental concerns associated with historical mining, and the global economic situation have had negative effects on exploration, development, and mining in Europe for many years. The assessment includes an overview with summary tables. Detailed descriptions of each tract, including the rationales for delineation and assessment, are given in appendixes A–G. Appendix H describes a geographic information system (GIS) that includes tract boundaries and point locations of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗
USGS1986

Introduction

Felsic plutonic rocks ranging from dioritic to granitic in composition and from 900 to 550 Ma in age are a major component of the Arabian Shield. These rocks and the potential for associated mineralization have been extensively investigated by the Saudi Arabian Deputy Ministry for Mineral Resources during the past decade in particular. This volume describes the multidisciplinary approach which has been developed, and summarizes results. The classification, distribution, petrology, mineralogy and structure of the felsic plutonic rocks, petrogenetic and metallogenetic concepts and representative examples of mineralization are described. It is concluded that the potential for additional mineral resources is substantial.

Journal of African Earth Sciences↗