Search USGS⌕ Search

SEARCH · Search USGS

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
USGS2000

Characterization of stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, 1998-99

Stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, were characterized from June 1998 to July 1999 by measuring the flow rate at two outfalls, delineating the drainage areas for each outfall, and calculating the volume of the stormwater discharges. Stormwater-discharge samples were collected and analyzed to determine the quality of the discharges. Constituent loads and loads per area were estimated for each drainage area. The studied drainage subareas covered approximately 46 percent of the total area of the Las Flores Industrial Park. Industrial groups represented in the study areas include manufacturers of textile, electronics, paper, fabricated metal, plastic, and chemical products. The concentrations of oil and grease (1 to 6 milligrams per liter), biochemical oxygen demand (4.7 to 16 milligrams per liter), total organic carbon (5.8 to 36 milligrams per liter), total suspended solids (28 to 100 milligrams per liter), and total phosphorous (0.11 to 0.78 milligrams per liter) from all the samples collected were less than the U.S. Environmental Protection Agency stormwater benchmark concentrations. Concentrations of chemical oxygen demand (15.8 to 157 milligrams per liter) and nitrate and nitrite (0.06 to 1.75 milligrams per liter) exceeded benchmark concentrations at one of the studied drainage areas. Total Kjeldahl nitrogen concentrations (1.00 to 3.20 milligrams per liter) exceeded the benchmark concentrations at the two studied drainage areas. Maximum concentrations for oil and grease, biochemical oxygen demand, chemical oxygen demand, total organic carbon, total Kjeldahl nitrogen, nitrate plus nitrite, and total phosphorous were detected in an area where electronics, plastics, and chemical products are currently manufactured. The maximum concentration of total suspended solids was detected at an area where textile, paper, plastic, chemical, and fabricated metal products are manufactured.

Open-File Report↗
USGS2004

A summary of the scientific literature on the effects of fire on the concentration of nutrients in surface waters

This paper provides a detailed review of the chemical changes that occur in soil during a fire, the pathways by which nutrients are transferred from soil to surface-water bodies following a fire, and the temporal and spatial effects of fires on the concentration of nutrients in surface-water bodies during and following a fire that have been reported in the scientific literature. Thirty-nine papers from the scientific literature that represent studies that (1) were done in a variety of environments (savannas, grasslands, temperate forests, alpine forests, and so forth); (2) had a range of sampling frequency and duration, such as during and immediately following a fire (from the start of fire to 1 year later), short-term sampling (from end of fire to 3 years later), and long term-sampling (sampling for greater than 3 years following a fire); and (3) incorporated watersheds with various burn intensities, severities, and histories were reviewed and summarized. The review of the scientific literature has revealed that measurable effects of fires on streamwater quality are most likely to occur if the fire was severe enough to burn large amounts of organic matter, if windy conditions were present during the fire, if heavy rain occurred following the fire, and if the fire occurred in a watershed with steep slopes and soils with little cation-exchange capacity. Measurable effects of fires on lake- and reservoir-water quality are most likely to occur if, in addition to the factors listed for streams, the lake or reservoir is oligotrophic or mesotrophic and the residence time of water in the lake or reservoir is short relative to the length of time elevated concentrations of nutrients occur in runoff. Knowledge of whether a lake or reservoir is nitrogen or phosphorus limited is important because eutrophication of nitrogen-limited lakes may occur following a fire due to increasing nitrogen:phosphorus ratios caused by prolonged increases of nitrogen concentrations, especially nitrate.

Open-File Report↗
USGS2005

Managing Fire in the Northern Chihuahuan Desert: A Review and Analysis of the Literature

Executive Summary This report began as a literature review (Gebow and Halvorson 2001) conducted for fire planners at Carlsbad Caverns National Park who were seeking information about (1) the natural state of park vegetation, (2) northern Chihuahuan Desert natural fire regimes, and (3) fire effects on park plant species. It is the goal of managers there to continue to refine the wildland and prescribed fire program as they learn more about the ecosystems at the park.The park has a history of grazing and then fire suppression in the 20th century. The current effort revisits questions asked by earlier workers at the park, Walter Kittams and Gary Ahlstrand, who began fire studies in the 1970s. This document addresses ecosystems and historical change to those systems in Chihuahuan Desert areas of southeast Arizona, southern New Mexico, west Texas, or in neighboring regions that share the same plant species. It examines fire literature for situations possibly analogous to those at Carlsbad Caverns. It also includes papers that offer advice on extrapolating future ecological trends from past ones (Swetnam et al. 1999) and on resource management decision-making (Grumbine 1997), and other pieces that address broader aspects of fire or landscape change (Goldman 1994; Marston 1996; Mutch 1994, 1995). These more philosophical works were included in the original review at the park's request and have been retained here because they discuss other issues relevant to fire management. Individual reviews of 35 papers, as requested originally by Carlsbad Caverns, appear in Appendix 1. The results section-summary of key findings-discusses historical changes to plant communities then focuses on burn intervals observed or recommended by workers for particular plant communities. Results from a search of the USDA Forest Service's Fire Effects Information System (www.fs.fed.us/database/feis) are also included in this report, supplemented with information from a review conducted by Ahlstrand (1981b) that included much of his own work. This database contains comprehensive plant species accounts and fire effects data. Entries are available for a number of the dominant species at Carlsbad Caverns, though the information frequently applies to the plants in other parts of their ranges. The literature presents highly variable fire effects and observed/recommended burn intervals for similar plant communities in the northern Chihuahuan Desert region. While local and longer-term fire-effects studies are still needed to guide resource managers, the variability seen in the literature itself translates into a fire management goal. Preserving the irregularity in time and space of fires would likely best replicate 'natural' fire regimes.

Open-File Report↗
USGS2005

Blind comparisons of shear-wave velocities at closely-spaced sites in San Jose, California: Proceedings of a Workshop held at the US Geological Survey, Menlo Park, May 3, 2004

Shear-wave velocities within several hundred meters of Earth's surface are important in specifying earthquake ground motions for engineering design. Not only are the shearwave velocities used in classifying sites for use of modern building codes, but they are also used in site-specific studies of particularly significant structures. Many are the methods for estimating sub-surface shear-wave velocities, but few are the blind comparisons of a number of the methods at a single site. The word "blind" is important here and means that the measurements and interpretations are done completely independent of one another. Stephen Hartzell of the USGS office on Golden, Colorado realized that such an experiment would be very useful for assessing the strengths and weaknesses of the various methods, and he and Jack Boatwright of the USGS office in Menlo Park, California, in cooperation with Carl Wentworth of the Menlo Park USGS office found a convenient site in the city of San Jose, California. The site had good access and space for conducting experiments, and a borehole drilled to several hundred meters by the Santa Clara Valley Water District was made available for downhole logging. Jack Boatwright asked David Boore to coordinate the experiment. In turn, David Boore persuaded several teams to make measurements, helped with the local logistics, collected the results, and organized and conducted an International Workshop in May, 2004. At this meeting the participants in the experiment gathered in Menlo Park to describe their measurements and interpretations, and to see the results of the comparisons of the various methods for the first time. This Open-File Report describes the results of that workshop. One of the participants, Michael Asten, offered to help the coordinator prepare this report. Because of his lead role in pulling the report together, Dr. Asten is the lead author of the paper to follow and is also the lead Compiler for the Open-File Report. It is important to recognize that most of the participants in the experiments contributed at their own expense. It is gratifying that many people recognized the importance of the experiment and were willing to volunteer their time and resources. We thank them for this effort. This Report is organized in three parts: the first part is a paper summarizing the results of the Workshop, and presenting some conclusions regarding the various methods; the second part is a compilation of those documents describing the experiments that were presented at the meeting (a few of the reports have had minor post-meeting revisions, but with only one exception noted later, none of the models were changed). The final part of this Report is a compilation of the presentations from the meeting -- these are largely in the form of Powerpoint files. No attempt has been made by the compilers to edit the material in parts 2 and 3. It is included here as is for the benefit of the reader.

California↗
USGS2008

Surficial Geologic Map of the Worcester North-Oxford- Wrentham-Attleboro Nine-Quadrangle Area in South- Central Massachusetts

The surficial geologic map layer shows the distribution of nonlithified earth materials at land surface in an area of nine 7.5-minute quadrangles (417 mi2 total) in south-central Massachusetts (fig. 1). Across Massachusetts, these materials range from a few feet to more than 500 ft in thickness. They overlie bedrock, which crops out in upland hills and in resistant ledges in valley areas. The geologic map differentiates surficial materials of Quaternary age on the basis of their lithologic characteristics (such as grain size and sedimentary structures), constructional geomorphic features, stratigraphic relationships, and age. Surficial materials also are known in engineering classifications as unconsolidated soils, which include coarse-grained soils, fine-grained soils, or organic fine-grained soils. Surficial materials underlie and are the parent materials of modern pedogenic soils, which have developed in them at the land surface. Surficial earth materials significantly affect human use of the land, and an accurate description of their distribution is particularly important for water resources, construction aggregate resources, earth-surface hazards assessments, and land-use decisions. The mapped distribution of surficial materials that lie between the land surface and the bedrock surface is based on detailed geologic mapping of 7.5-minute topographic quadrangles, produced as part of an earlier (1938-1982) cooperative statewide mapping program between the U.S. Geological Survey and the Massachusetts Department of Public Works (now Massachusetts Highway Department) (Page, 1967; Stone, 1982). Each published geologic map presents a detailed description of local geologic map units, the genesis of the deposits, and age correlations among units. Previously unpublished field compilation maps exist on paper or mylar sheets and these have been digitally rendered for the present map compilation. Regional summaries based on the Massachusetts surficial geologic mapping studies discuss the ages of multiple glaciations, the nature of glaciofluvial, glaciolacustrine, and glaciomarine deposits, and the processes of ice advance and retreat across Massachusetts (Koteff and Pessl, 1981; papers in Larson and Stone, 1982; Oldale and Barlow, 1986; Stone and Borns, 1986; Warren and Stone, 1986). This compilation of surficial geologic materials is an interim product that defines the areas of exposed bedrock and the boundaries between glacial till, glacial stratified deposits, and overlying postglacial deposits. This work is part of a comprehensive study to produce a statewide digital map of the surficial geology at a 1:24,000-scale level of accuracy. This surficial geologic map layer covering nine quadrangles revises previous digital surficial geologic maps (Stone and others, 1993; MassGIS, 1999) that were compiled on base maps at regional scales of 1:125,000 and 1:250,000. The purpose of this study is to provide fundamental geologic data for the evaluation of natural resources, hazards, and land information within the Commonwealth of Massachusetts.

Open-File Report↗
USGS2006

The Interface Between Theory and Data in Structural Equation Models

Structural equation modeling (SEM) holds the promise of providing natural scientists the capacity to evaluate complex multivariate hypotheses about ecological systems. Building on its predecessors, path analysis and factor analysis, SEM allows for the incorporation of both observed and unobserved (latent) variables into theoretically based probabilistic models. In this paper we discuss the interface between theory and data in SEM and the use of an additional variable type, the composite, for representing general concepts. In simple terms, composite variables specify the influences of collections of other variables and can be helpful in modeling general relationships of the sort commonly of interest to ecologists. While long recognized as a potentially important element of SEM, composite variables have received very limited use, in part because of a lack of theoretical consideration, but also because of difficulties that arise in parameter estimation when using conventional solution procedures. In this paper we present a framework for discussing composites and demonstrate how the use of partially reduced form models can help to overcome some of the parameter estimation and evaluation problems associated with models containing composites. Diagnostic procedures for evaluating the most appropriate and effective use of composites are illustrated with an example from the ecological literature. It is argued that an ability to incorporate composite variables into structural equation models may be particularly valuable in the study of natural systems, where concepts are frequently multifaceted and the influences of suites of variables are often of interest.

Open-File Report↗
USGS2007

Great Basin Paleontological Bibliography

Introduction This work was conceived as a derivative product for 'The Metallogeny of the Great Basin' project of the Mineral Resources Program of the U.S. Geological Survey. In the course of preparing a fossil database for the Great Basin that could be accessed from the Internet, it was determined that a comprehensive paleontological bibliography must first be compiled, something that had not previously been done. This bibliography includes published papers and abstracts as well as unpublished theses and dissertations on fossils and stratigraphy in Nevada and adjoining portions of California and Utah. This bibliography is broken into first-order headings by geologic age, secondary headings by taxonomic group, followed by ancillary topics of interest to both paleontologists and stratigraphers; paleoecology, stratigraphy, sedimentary petrology, paleogeography, tectonics, and petroleum potential. References were derived from usage of Georef, consultation with numerous paleontologists and geologists working in the Great Basin, and literature currently on hand with the authors. As this is a Web-accessible bibliography, we hope to periodically update it with new citations or older references that we have missed during this compilation. Hence, the authors would be grateful to receive notice of any new or old papers that the readers think should be added. As a final note, we gratefully acknowledge the helpful reviews provided by A. Elizabeth J. Crafford (Anchorage, Alaska) and William R. Page (USGS, Denver, Colorado).

Open-File Report↗
USGS2007

Log ASCII Standard (LAS) Files for Geophysical Wireline Well Logs and Their Application to Geologic Cross Sections Through the Central Appalachian Basin

Introduction The U.S. Geological Survey (USGS) uses geophysical wireline well logs for a variety of purposes, including stratigraphic correlation (Hettinger, 2001, Ryder, 2002), petroleum reservoir analyses (Nelson and Bird, 2005), aquifer studies (Balch, 1988), and synthetic seismic profiles (Kulander and Ryder, 2005). Commonly, well logs are easier to visualize, manipulate, and interpret when available in a digital format. In recent geologic cross sections E-E' and D-D', constructed through the central Appalachian basin (Ryder, Swezey, and others, in press; Ryder, Crangle, and others, in press), gamma ray well log traces and lithologic logs were used to correlate key stratigraphic intervals (Fig. 1). The stratigraphy and structure of the cross sections are illustrated through the use of graphical software applications (e.g., Adobe Illustrator). The gamma ray traces were digitized in Neuralog (proprietary software) from paper well logs and converted to a Log ASCII Standard (LAS) format. Once converted, the LAS files were transformed to images through an LAS-reader application (e.g., GeoGraphix Prizm) and then overlain in positions adjacent to well locations, used for stratigraphic control, on each cross section. This report summarizes the procedures used to convert paper logs to a digital LAS format using a third-party software application, Neuralog. Included in this report are LAS files for sixteen wells used in geologic cross section E-E' (Table 1) and thirteen wells used in geologic cross section D-D' (Table 2).

Open-File Report↗
USGS2008

Weight of Production of Emeralds, Rubies, Sapphires, and Tanzanite from 1995 Through 2005

U.S. Geological Survey (USGS) historically has not attempted to report comprehensive world production of gemstones on a country basis. This was because estimation of gemstone production is inherently difficult due to the fragmentary nature of the industry, the lack of governmental oversight or reporting in many countries where colored gemstones are mined, and the wide variation in quality between individual gemstones. Unlike diamonds, which, with the exception of the alluvial stones of West Africa, are mainly produced by large international mining companies and evaluated, cut, and marketed through a highly developed pricing structure and complex commercial arrangements, colored gemstones are mainly mined by individuals or small companies and have less developed evaluation and marketing arrangements. The trading centers for colored gems are smaller and less well known than the diamond centers. Colored gemstones, like alluvial diamonds, have the potential to be used to fund civil conflicts and other illegal activities, and because trade in colored gemstones is less organized than that of diamonds, they offer less opportunity for effective regulation of their trade. And, like diamond, until the recent advent of the Kimberley Process no generally accepted estimates of colored gemstone production globally or by producing country have existed. The present paper is a first attempt to develop production statistics for the three precious gems - emeralds , rubies , and sapphires - and tanzanite tanzanite, a semi-precious gem. The data consist of the weight of production of each of the gemstones from 1995 through 2005. Preliminary data on the weights of gemstone production were presented as a poster session at the Gemological Institute of America's Gemological Research Conference in San Diego, CA, in 2006, and as a published abstract (Yager, 2006) in an attempt to gather response to the estimates. The USGS continues to welcome information and suggestions that would improve the data presented here. Information used to make the production estimates presented in this paper include annual USGS Mineral Questionnaires completed by producing countries, data on exports from producing countries, reports from the literature, and company reports. Comparisons of the weight and the value of production of a type of gemstone between countries may differ considerably. Whereas east African countries dominate the weight production of rubies, Burma (Myanmar) is widely thought to have the highest value of ruby production. Data on the value of gemstone production are even more difficult to estimate than is the weight of production. Value of production is dependent upon both the quality and the sizes of the stones produced. Such data are not readily available and are difficult to estimate; therefore this report does not present tables of values of production. Instead, the report briefly discusses the forms in which gemstones are sold, the systems used to value the gemstones, and selected data that illustrate the variability of value of gemstones of a particular type.

Open-File Report↗
USGS2008

Catalog of Mount St. Helens 2004-2007 dome samples with major- and trace-element chemistry

Sampling and analysis of eruptive products at Mount St. Helens is an integral part of volcano monitoring efforts conducted by the U.S. Geological Survey?s Cascades Volcano Observatory (CVO). The objective of our eruption sampling program is to enable petrological assessments of pre-eruptive magmatic conditions, critical for ascertaining mechanisms for eruption triggering and forecasting potential changes in eruption behavior. This report provides a catalog of near-vent lithic debris and new dome-lava collected during 34 intra-crater sampling forays throughout the October 2004 to October 2007 (2004-7) eruptive interval at Mount St. Helens. In addition, we present comprehensive bulk-rock geochemistry for a time-series of representative (2004-7) eruption products. This data, along with that in a companion report on Mount St. Helens 2004 to 2006 tephra by Rowe and others (2008), are presented in support of the contents of the U.S. Geological Survey Professional Paper 1750 (Sherrod and others, eds., 2008). Readers are referred to appropriate chapters in USGS Professional Paper 1750 for detailed narratives of eruptive activity during this time period and for interpretations of sample characteristics and geochemical data. The suite of rock samples related to the 2004-7 eruption of Mount St. Helens and presented in this catalog are archived at the David A. Johnson Cascades Volcano Observatory, Vancouver, Wash. The Mount St. Helens 2004-7 Dome Sample Catalogue with major- and trace-element geochemistry is tabulated in 3 worksheets of the accompanying Microsoft Excel file, of2008-1130.xls. Table 1 provides location and sampling information. Table 2 presents sample descriptions. In table 3, bulk-rock major and trace-element geochemistry is listed for 44 eruption-related samples with intra-laboratory replicate analyses of 19 dacite lava samples. A brief overview of the collection methods and lithology of dome samples is given below as an aid to deciphering the dome sample catalog. This is followed by an explanation of the categories of sample information (column headers) in Tables 1 and 2. A summary of the analytical methods used to obtain the geochemical data in this report introduces the presentation of major- and trace-element geochemistry of 2004-7 Mount St. Helens dome samples in table 3. Intra-laboratory results for the USGS AGV-2 standard are presented (tables 4 and 5), which demonstrate the compatibility of chemical data from different sources.

Open-File Report↗
USGS2008

Where's the Hayward Fault? A green guide to the fault

This report describes self-guided field trips to one of North America's most dangerous earthquake faults: the Hayward Fault. Locations were chosen because of their easy access using mass transit and/or their significance relating to the natural and cultural history of the East Bay landscape. This field-trip guidebook was compiled to help commemorate the 140th anniversary of an estimated M 7.0 earthquake that occurred on the Hayward Fault at approximately 7:50 AM, October 21st, 1868. Although many reports and on-line resources have been compiled about the science and engineering associated with earthquakes on the Hayward Fault, this report has been prepared to serve as an outdoor guide to the fault for the interested public and for educators. The first chapter is a general overview of the geologic setting of the fault. This is followed by ten chapters of field trips to selected areas along the fault, or in the vicinity, where landscape, geologic, and man-made features that have relevance to understanding the nature of the fault and its earthquake history can be found. A glossary is provided to define and illustrate scientific term used throughout this guide. A ?green? theme helps conserve resources and promotes use of public transportation, where possible. Although access to all locations described in this guide is possible by car, alternative suggestions are provided. To help conserve paper, this guidebook is available on-line only; however, select pages or chapters (field trips) within this guide can be printed separately to take along on an excursion. The discussions in this paper highlight transportation alternatives to visit selected field trip locations. In some cases, combinations, such as a ride on BART and a bus, can be used instead of automobile transportation. For other locales, bicycles can be an alternative means of transportation. Transportation descriptions on selected pages are intended to help guide fieldtrip planners or participants choose trip destinations based on transportation options, interests, or special needs.

California↗
USGS2008

The Global Flows of Metals and Minerals

This paper provides a preliminary review of the trends in worldwide metals and industrial minerals production and consumption based on newly developed global metals and minerals Material Flow Accounts (MFA). The MFA developed encompass data on extraction and consumption for 25 metal and mineral commodities, on a country-by-country and year-by-year basis, for the period 1970 to 2004. The data-base, jointly developed by the authors, resides with the U.S. Geological Survey (USGS) as individual commodity Excel workbooks and within a Filemaker data management system for use in analysis. Numerous national MFA have been developed to provide information on the industrial metabolism of individual countries. These MFA include material flows associated with the four commodity categories of goods that are inputs to a country's economy, agriculture, forestry, metals and minerals, and nonrenewable organic material. In some cases, the material flows associated with the creation and maintenance of the built infrastructure (such as houses, buildings, roads, airports, dams, and so forth) were also examined. The creation of global metals and industrial minerals flows is viewed as a first step in the creation of comprehensive global MFA documenting the historical and current flows of all of the four categories of physical goods that support world economies. Metals and minerals represent a major category of nonrenewable resources that humans extract from and return to the natural ecosystem. As human populations and economies have increased, metals and industrial minerals use has increased concomitantly. This dramatic growth in metals and minerals use has serious implications for both the availability of future resources and the health of the environment, which is affected by the outputs associated with their use. This paper provides an overview of a number of the trends observed by examining the database and suggests areas for future study.

Open-File Report↗
USGS2009

Log ASCII Standard (LAS) Files for Geophysical (Gamma Ray) Wireline Well Logs and Their Application to Geologic Cross Section C-C' Through the Central Appalachian Basin

U.S. Geological Survey (USGS) regional geologic cross section C-C' (Ryder and others, 2008) displays key stratigraphic intervals in the central Appalachian basin. For this cross section, strata were correlated by using descriptions of well cuttings and gamma ray well log traces. This report summarizes the procedures used to convert gamma ray curves on paper well logs to the digital Log ASCII (American Standard Code for Information Interchange) Standard (LAS) format using the third-party software application Neuralog. The procedures could be used with other geophysical wireline logs also. The creation of digital LAS files from paper well logs by using Neuralog is very helpful, especially when dealing with older logs with limited or nonexistent digital data. The LAS files from the gamma ray logs of 11 wells used to construct cross section C-C' are included in this report. They may be downloaded from the index page as a single ZIP file.

Open-File Report↗
USGS2010

Digital tabulation of geologic and hydrologic data from wells in the northern San Francisco Bay region, northern California

Downhole lithologic information and aquifer pumping test data are reported from 464 wells from a broad area of the northern part of the Coast Ranges in California. These data were originally published in paper form as numerous tables within three USGS Water-Supply Papers describing geology and groundwater conditions in Napa and Sonoma Valleys, the Santa Rosa and Petaluma Valley areas, and in the Russian River Valley and areas in Sonoma and Mendocino Counties, Calif. The well data are compiled in this report in digital form suitable for use in a digital mapping environment. These data, although mostly from relatively shallow water wells, provide important subsurface information that displays the disposition and facies transition of lithologic units throughout this broad area. Well lithologic data themselves and simple three-dimensional interpolation of those data show distinct spatial patterns that are linked to subsurface stratigraphy and structure and can be used to aid in the assessment of the groundwater resources.

California↗
USGS2011

Tectonic and metallogenic model for northeast Asia

This document describes the digital files in this report that contains a tectonic and metallogenic model for Northeast Asia. The report also contains background materials. This tectonic and metallogenic model and other materials on this report are derived from (1) an extensive USGS Professional Paper, 1765, on the metallogenesis and tectonics of Northeast Asia that is available on the Internet at http://pubs.usgs.gov/pp/1765/; and (2) the Russian Far East parts of an extensive USGS Professional Paper, 1697, on the metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera that is available on the Internet at http://pubs.usgs.gov/pp/pp1697/. The major purpose of the tectonic and metallogenic model is to provide, in movie format, a colorful summary of the complex geology, tectonics, and metallogenesis of the region. To accomplish this goal four steps were taken: (1) 13 time-stage diagrams, from the late Neoproterozoic (850 Ma) through the present (0 Ma), were adapted, generalized, and transformed into color static time-stage diagrams; (2) the 13 time-stage diagrams were placed in a computer morphing program to produce the model; (3) the model was examined and each diagram was successively adapted to preceding and subsequent diagrams to match the size and surface expression of major geologic units; and (4) the final version of the model was produced in successive iterations of steps 2 and 3. The tectonic and metallogenic model and associated materials in this report are derived from a project on the major mineral deposits, metallogenesis, and tectonics of the Northeast Asia and from a preceding project on the metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera. Both projects provide critical information on bedrock geology and geophysics, tectonics, major metalliferous mineral resources, metallogenic patterns, and crustal origin and evolution of mineralizing systems for this region. The major scientific goals and benefits of the projects are to: (1) provide a comprehensive international data base on the mineral resources of the region that is the first extensive knowledge available in English; (2) provide major new interpretations of the origin and crustal evolution of mineralizing systems and their host rocks, thereby enabling enhanced, broad-scale tectonic reconstructions and interpretations; and (3) promote trade and scientific and technical exchanges between North America and eastern Asia.

Summit, Colorado↗
USGS2013

Information to support to monitoring and habitat restoration on Ash Meadows National Wildlife Refuge

The Ash Meadows National Wildlife Refuge staff focuses on improving habitat for the highest incidence of endemic species for an area of its size in the continental United States. Attempts are being made to restore habitat to some semblance of its pre-anthropogenic undisturbed condition, and to provide habitat conditions to which native plant and animal species have evolved. Unfortunately, restoring the Ash Meadows’ Oases to its pre-anthropogenic undisturbed condition is almost impossible. First, there are constraints on water manipulation because there are private holdings within the refuge boundary; second, there has been at least one species extinction—the Ash Meadows pool fish ( Empetrichthys merriami ). It is also quite possible that thermal endemic invertebrate species were lost before ever being described. Perhaps the primary obstacle to restoring Ash Meadows to its pre-anthropogenic undisturbed conditions is the presence of invasive species. However, invasive species, such as red swamp crayfish ( Procambarus clarki ) and western mosquitofish ( Gambusia affinis ), are a primary driving force in restoring Ash Meadows’ spring systems, because under certain habitat conditions they can all but replace native species. Returning Ash Meadows’ physical landscape to some semblance of its pre-anthropogenic undisturbed condition through natural processes may take decades. Meanwhile, the natural dissolution of concrete and earthen irrigation channels threatens to allow cattail marshes to flourish instead of spring-brooks immediately downstream of spring discharge. This successional stage favors non-native crayfish and mosquitofish over the native Amargosa pupfish ( Cyprinodon nevadensis ). Thus, restoration is needed to control non-natives and to promote native species, and without such intervention the probability of native fish reduction or loss, is anticipated. The four studies in this report are intended to provide information for restoring native fish habitat and for monitoring native fish populations in relation to restoration efforts on the Ash Meadows National Wildlife Refuge. There are no precise records on conditions of each of the spring systems prior to anthropogenic alteration; however, fostering conditions that favor native over non-natives will be key to habitat restoration. Information regarding native species carbon source is needed to create habitat that favors native species, thus habitat restoration fostering food stuff consumed by native species should be considered in restoration efforts. In compiling data for the first part of this report, we tracked carbon source for native and non-native species at four stations along the Jackrabbit Spring system. Thus, we were able to contrast carbon source in warm- and cool-water habitats. Habitat in Jackrabbit Spring was improved for native fishes in 2007. The second paper in this report focuses on native fish populations in Jackrabbit Spring system pre- and post-restoration. Much of the Ash Meadows Oases is marsh habitat where non-native red swamp crayfish and western mosquitofish are often abundant, to the detriment of non-natives. Because marsh habitat is broadly represented in the Ash Meadows landscape, establishing marsh habitat most conducive to the native fishes is important to the restoration effort, and the third paper addresses marsh habitat type with the relative abundance of fishes and crayfish. There are previous years of monitoring Ash Meadows’ native fish populations, but not all monitoring occurred at the same time of year. Desert-fish populations sometimes undergo seasonal fluctuation, so it might not be valid to compare population trends using difference seasons. For report four, we tracked a closed population of Amargosa pupfish ( Cyprinodon nevadensis ) year round to track seasonal trends. Knowledge of seasonal trends is important in tracking changes of populations pre- and post-restoration.

Nevada↗
USGS2013

Conservation and Ecology of Marine Forage Fishes--Proceedings of a Research Symposium, September 2012

Locally and globally, there is growing recognition of the critical roles that herring, smelt, sand lance, eulachon, and other forage fishes play in marine ecosystems. Scientific and resource management entities throughout the Salish Sea, agree that extensive information gaps exist, both in basic biological knowledge and parameters critical to fishery management. Communication and collaboration among researchers also is inadequate. Building on the interest and enthusiasm generated by recent forage fish workshops and symposia around the region, the 2012 Research Symposium on the Conservation and Ecology of Marine Forage Fishes was designed to elucidate practical recommendations for science and policy needs and actions, and spur further collaboration in support for the precautionary management of forage fish. This dynamic and productive event was a joint venture of the Northwest Straits Commission Forage Fish Program, U.S. Geological Survey (USGS), Washington Department of Fish and Wildlife (WDFW), and The Puget Sound Partnership. The symposium was held on September 12–14, 2012, at the University of Washington, Friday Harbor Laboratories campus. Sixty scientists, graduate students, and fisheries policy experts convened; showcasing ongoing research, conservation, and management efforts targeting forage fish from regional and national perspectives. The primary objectives of this event were to: (1) review current research and management related to marine forage fish species; and (2) identify priority science and policy needs and actions for Washington, British Columbia, and the entire West Coast. Given the diversity of knowledge, interests, and disciplines surrounding forage fish on both sides of the international border, the organizing committee made a concerted effort to contact many additional experts who, although unable to attend, provided valuable insights and ideas to the symposium structure and discussions. The value of the symposium format was highlighted in the closing remarks delivered by Joseph Gaydos, SeaDoc Society and Chair of the Puget Sound Science Panel. Dr. Gaydos’ presentation referenced the 2011 paper by Murray Rudd in the journal Conservation Biology , “How research-prioritization exercises affect conservation policy.” The paper points out that policy makers and funding agencies are more likely to gain a full understanding of issues when they are presented with research findings from an aligned research program. That is, compared to unaligned research strategies, where work is not based on identified research priorities.

Open-File Report↗
USGS2013

Modeling for the SAFRR Tsunami Scenario-generation, propagation, inundation, and currents in ports and harbors: Chapter D in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

This U.S. Geological Survey (USGS) Open-File report presents a compilation of tsunami modeling studies for the Science Application for Risk Reduction (SAFRR) tsunami scenario. These modeling studies are based on an earthquake source specified by the SAFRR tsunami source working group (Kirby and others, 2013). The modeling studies in this report are organized into three groups. The first group relates to tsunami generation. The effects that source discretization and horizontal displacement have on tsunami initial conditions are examined in section 1 (Whitmore and others). In section 2 (Ryan and others), dynamic earthquake rupture models are explored in modeling tsunami generation. These models calculate slip distribution and vertical displacement of the seafloor as a result of realistic fault friction, physical properties of rocks surrounding the fault, and dynamic stresses resolved on the fault. The second group of papers relates to tsunami propagation and inundation modeling. Section 3 (Thio) presents a modeling study for the entire California coast that includes runup and inundation modeling where there is significant exposure and estimates of maximum velocity and momentum flux at the shoreline. In section 4 (Borrero and others), modeling of tsunami propagation and high-resolution inundation of critical locations in southern California is performed using the National Oceanic and Atmospheric Administration’s (NOAA) Method of Splitting Tsunami (MOST) model and NOAA’s Community Model Interface for Tsunamis (ComMIT) modeling tool. Adjustments to the inundation line owing to fine-scale structures such as levees are described in section 5 (Wilson). The third group of papers relates to modeling of hydrodynamics in ports and harbors. Section 6 (Nicolsky and Suleimani) presents results of the model used at the Alaska Earthquake Information Center for the Ports of Los Angeles and Long Beach, as well as synthetic time series of the modeled tsunami for other selected locales in southern California. Importantly, section 6 provides a comparison of the effect of including horizontal displacements at the source described in section 1 and differences in bottom friction on wave heights and inundation in the Ports of Los Angeles and Long Beach. Modeling described in section 7 (Lynett and Son) uses a higher order physical model to determine variations of currents during the tsunami and complex flow structures such as jets and eddies. Section 7 also uses sediment transport models to estimate scour and deposition of sediment in ports and harbors—a significant effect that was observed in southern California following the 2011 Tohoku tsunami. Together, all of the sections in this report form the basis for damage, impact, and emergency preparedness aspects of the SAFRR tsunami scenario. Three sections of this report independently calculate wave height and inundation results using the source specified by Kirby and others (2013). Refer to figure 29 in section 3, figure 52 in section 4, and figure 62 in section 6. All of these results are relative to a mean high water (MHW) vertical datum. Slight differences in the results are observed in East Basin of the Port of Los Angeles, Alamitos Bay, and the Seal Beach National Wildlife Refuge. However, given that these three modeling efforts involved different implementations of the source, different numerical wave propagation and runup models, and slight differences in the digital elevation models (DEMs), the similarity among the results is remarkable.

California↗