Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

Seismic-Hazard Maps for the Conterminous United States, 2008

Probabilistic seismic-hazard maps were prepared for the conterminous United States portraying peak horizontal acceleration and horizontal spectral response acceleration for 0.2- and 1.0-second periods with probabilities of exceedance of 10 percent in 50 years and 2 percent in 50 years. All of the maps were prepared by combining the hazard derived from spatially smoothed historic seismicity with the hazard from fault-specific sources. The acceleration values contoured are the random horizontal component. The reference site condition is firm rock, defined as having an average shear-wave velocity of 760 m/s in the top 30 meters corresponding to the boundary between NEHRP (National Earthquake Hazards Reduction program) site classes B and C. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. The grid of points were contoured to produce the final representation of the seismic-hazard. These maps are intended to summarize the available quantitative information about seismic ground motion hazard for the conterminous United States from geologic and geophysical source.

Scientific Investigations Map↗

Map showing mineral-resource potential of the King Range and Chemise Mountain Instant Study Areas, Humboldt and Mendocino counties, California

The potential for economic development of energy-related or metallic mineral resources in the King Range and Chemise Mountain Instant Study Areas is low to moderate as indicated by geologic, geophysical, and geochemical investigations. No oil or gas seeps or coal seams were detected within the King Range or Chemise Mountain Study Area. The low porosity and permeability of the Franciscan sandstones that underlie these areas indicate a very low potential for oil or gas. The geothermal resource potential of these areas also is low. Minor manganese resources occur adjacent to the southeast corner of the King Range Instant Study Area near Queen Peak. The manganese forms small stratabound deposits associated with radiolarian chert and pillow basalt. The known deposits are too small and the manganese too low in concentration for further economic exploitation. Similar manganese mineralization may be within the belt of melange in the southeast corner of the King Range area and within the Chemise Mountain Instant Study Area, but economic deposits are unlikely. Although there has been historical base- and precious-metal exploration activity north of the King Range in the Mattole River drainage, our geologic and geochemical field data indicate almost no gold potential and low potentials for lead, zinc, copper, and silver. During this investigation, one high-grade vein and several minor veins containing lead, zinc, copper, and silver were discovered at Point Delgada immediately south of the King Range Instant Study Area. The vein mineralization is Miocene and cuts Cretaceous basalt flows, dikes, flow breccia, and younger overlying sedimentary rocks of the King Range. The vein mineralization at Point Delgada could be remobilized from more extensive unexposed stratabound base-metal mineralization at depth. Traces of lead and zinc detected within the King Range Instant Study Area may have similar stratabound or vein origins, but no resource potential is indicated. Minor copper mineralization with associated lead, zinc, and manganese anomalies within the Chemise Mountain Instant Study Area is of low economic potential because of the shearing, isolation, and lenticularity of the basaltic and cherty rocks within the melange mineralization.

California↗

Geologic map of Okmok Volcano

The geologic map and description of map units presented here cover approximately 880 km2 of northeastern Umnak Island, Aleutian Islands, Alaska. This report focuses on Okmok Volcano and its eruptive products and updates the mid-20th-century geologic map of Byers (1959). Mapped deposits reflect the state of the volcano just prior to the 2008 eruption. Published information about other portions of Umnak Island geology, including Mount Recheshnoi and Mount Vsevidof, can be found in Byers (1959). The 2008 eruption and its deposits are described in Larsen and others (2009, 2013, 2015). Okmok Volcano is one of 54 historically active volcanoes in the Alaska–Aleutian volcanic arc that stretches across southern mainland Alaska and the Aleutian Islands (fig. 1; Wood and Kienle, 1990; Miller and others, 1998; Cameron and others, 2020). The highest point of the modern Okmok Caldera is along the caldera’s northern rim, 967 m in elevation, and formally named “Mount Okmok” (U.S. Board on Geographic Names, www.usgs.gov/core-science-systems/ngp/boardon-geographic-names/domestic-names). Okmok Volcano dominates the northeastern portion of Umnak Island, which is 100 km southwest of Unalaska/Dutch Harbor and 1,400 km southwest of Anchorage (figs. 1, 2). The Port of Dutch Harbor on Unalaska Island produces the highest volume of seafood for any port in the United States (see fisheries.noaa.gov/resource/document/fisheries-united-states-2018-report). Unalaska city and the Port of Dutch Harbor have been impacted by ash fall and drifting ash clouds from Okmok Volcano’s explosive eruptions as recently as 2008. Holocene and late Pleistocene volcanic rocks and deposits of Okmok Volcano rest upon glaciated Tertiary volcanic and sedimentary rocks (Byers, 1959). The first geologic mapping expedition to Okmok Volcano was by the U.S. Geological Survey (USGS) after the 1945 eruption, largely in response to concerns about volcanic hazards to U.S. military activities in the Aleutians Islands (Byers and others, 1947, 1959; Byers and Brannock, 1949; Byers, 1955, 1959, 1961). The State of Alaska conducted further mapping and geochemical studies as part of its geothermal exploration program in the 1980s (Nye, 1983; Nye and Reid, 1986; Motyka and others, 1993). Additional modern geological work focused on Okmok Volcano and the rest of Umnak Island to address the geochemistry and origin of primary Aleutian arc magmas and subduction zone mass recycling (Marsh, 1982; Brophy and Marsh, 1986; Nye and Reid, 1986; Myers and Marsh, 1987; Miller and others, 1992; Fournelle and others, 1994; Kay and Kay, 1994). In 1998, the Alaska Volcano Observatory (AVO) began a multi-year effort to expand geophysical monitoring in the central Aleutians Islands, including at Okmok Volcano. As part of this effort, AVO geologists from the University of Alaska Fairbanks Geophysical Institute (UAF/GI), the Alaska Division of Geological & Geophysical Surveys (DGGS), and USGS also began a renewed effort to document Okmok Volcano’s recent eruption products. The project started with reconnaissance fieldwork to document and sample products from the 1997 eruption within Okmok Caldera. This evolved into an effort to produce an updated geologic map of Okmok Volcano and gather more information about its eruptive history and hazards. Three significant eruptions occurred at Okmok Volcano in 1958, 1997, and 2008—after fieldwork had been conducted for the original 1:63,360-scale geologic map produced by Byers (1959)—resulting in new volcanic deposits not previously described. Okmok Volcano is one of the most frequently active volcanoes in the Aleutian volcanic arc. Seismic and geodetic monitoring indicate ongoing unrest at Okmok Volcano since at least 1997. Geodetic observations of inflation before and after the 1997 and 2008 eruptions indicate a nearly continuous input of new magma from a depth consistent with frequent eruptions of basalt and basaltic andesite magmas over the past 200 years (Larsen and others, 2013; Lu and others, 2000, 2003, 2005; Mann, 2002; Mann and others, 2002). To better understand the likelihood and character of future eruptions from Okmok Volcano, it is necessary to understand its past behavior, including eruptions since the first geologic map was published by Byers (1959).

Alaska↗

Status of Regional Gravity Project, Kingdom of Saudi Arabia, as of 1 January, 1979

Regional gravity data have now been obtained for approximately 33 percent of the area of the Arabian Shield, associated harrat areas, and the Red Sea coastal plain. Virtually no surveys have been done on the Phanerozoic platform around the edges of the shield, and although regional gravity coverage is available for the Eastern Province from the Arabian American Oil Company, it is confidential. Approximately 4,500 more gravity stations at 10 km spacing are needed to complete the coverage of the shield, and 5,250 are needed on the Phanerozoic platform to the north and east of the shield. The initial gravity maps compiled from the regional gravity project will be along the "geophysical strip", a band approximately 150 km wide across the shield from Al Qawayiyah to the Farasan Islands. As more data become available, additional maps will be compiled at 1:500,000 scale covering the same areas as the USGS Miscellaneous Investigations Maps 1-700-A to I-220-A. Computer software development and implementation for gravity data reduction, storage, retrieval, and display are 80 percent complete. Development and implementation of software for routine semi-quantitative and quantitative interpretation are 50 percent complete. If the Directorate General of Mineral Resources were to commit full support for the regional gravity project, phase 1 (data acquisition) and phase 2 (data reduction and publication of maps and principal facts) could be completed and phase 3 (interpretation) could be about 50 percent completed by the end of the Third Five Year Development Plan (1985).

Open-File Report↗

Mineral resource assessment of mafic and ultramafic rocks in the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina

Mineral resources of the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina, were assessed between 1984 and 1990 under the Conterminuous United States Mineral Assessment Program (CUSMAP) of the U.S. Geological Survey (USGS). The mineral resource assessments were made on the basis of geologic, geochemical, and geophysical investigations and on the distribution of mines, prospects and mineral occurrences reported in the literature. This report is an assessment of the mineral resources associated with mafic and ultramafic rocks in the Greenville quadrangle. It is based on the geology as mapped by Nelson and others (1987, 1989), on geochemistry of rock samples collected for this and other studies, on data available for known mines and prospects, and on the published geologic literature.

Georgia;North Carolina;South Carolina↗

Applications of research from the U.S. Geological Survey program, assessment of regional earthquake hazards and risk along the Wasatch Front, Utah

INTERACTIVE WORKSHOPS: ESSENTIAL ELEMENTS OF THE EARTHQUAKE HAZARDS RESEARCH AND REDUCTION PROGRAM IN THE WASATCH FRONT, UTAH: Interactive workshops provided the forum and stimulus necessary to foster collaboration among the participants in the multidisciplinary, 5-yr program of earthquake hazards reduction in the Wasatch Front, Utah. The workshop process validated well-documented social science theories on the importance of interpersonal interaction, including interaction between researchers and users of research to increase the probability that research will be relevant to the user's needs and, therefore, more readily used. REDUCING EARTHQUAKE HAZARDS IN UTAH: THE CRUCIAL CONNECTION BETWEEN RESEARCHERS AND PRACTITIONERS: Complex scientific and engineering studies must be translated for and transferred to nontechnical personnel for use in reducing earthquake hazards in Utah. The three elements needed for effective translation, likelihood of occurrence, location, and severity of potential hazards, and the three elements needed for effective transfer, delivery, assistance, and encouragement, are described and illustrated for Utah. The importance of evaluating and revising earthquake hazard reduction programs and their components is emphasized. More than 30 evaluations of various natural hazard reduction programs and techniques are introduced. This report was prepared for research managers, funding sources, and evaluators of the Utah earthquake hazard reduction program who are concerned about effectiveness. An overview of the Utah program is provided for those researchers, engineers, planners, and decisionmakers, both public and private, who are committed to reducing human casualties, property damage, and interruptions of socioeconomic systems. PUBLIC PERCEPTIONS OF THE IMPLEMENTATION OF EARTHQUAKE MITIGATION POLICIES ALONG THE WASATCH FRONT IN UTAH: The earthquake hazard potential along the Wasatch Front in Utah has been well defined by a number of scientific and engineering studies. Translated earthquake hazard maps have also been developed to identify areas that are particularly vulnerable to various causes of damage such as ground shaking, surface rupturing, and liquefaction. The implementation of earthquake hazard reduction plans are now under way in various communities in Utah. The results of a survey presented in this paper indicate that technical public officials (planners and building officials) have an understanding of the earthquake hazards and how to mitigate the risks. Although the survey shows that the general public has a slightly lower concern about the potential for economic losses, they recognize the potential problems and can support a number of earthquake mitigation measures. The study suggests that many community groups along the Wasatch Front, including volunteer groups, business groups, and elected and appointed officials, are ready for action-oriented educational programs. These programs could lead to a significant reduction in the risks associated with earthquake hazards. A DATA BASE DESIGNED FOR URBAN SEISMIC HAZARDS STUDIES: A computerized data base has been designed for use in urban seismic hazards studies conducted by the U.S. Geological Survey. The design includes file structures for 16 linked data sets, which contain geological, geophysical, and seismological data used in preparing relative ground response maps of large urban areas. The data base is organized along relational data base principles. A prototype urban hazards data base has been created for evaluation in two urban areas currently under investigation: the Wasatch Front region of Utah and the Puget Sound area of Washington. The initial implementation of the urban hazards data base was accomplished on a microcomputer using dBASE III Plus software and transferred to minicomputers and a work station. A MAPPING OF GROUND-SHAKING INTENSITIES FOR SALT LAKE COUNTY, UTAH: This paper documents the development of maps showing a

Professional Paper↗

Preliminary report on geophysical data in Yavapai County, Arizona

Recently acquired geophysical data provide information on the geologic framework and its effect of groundwater flow and on stream/aquifer interaction in Yavapai County, Arizona. High-resolution aeromagnetic data reflect diverse rock types at and below the topographic surface and have permitted a preliminary interpretation of faults and underlying rock types (in particular, volcanic) that will provide new insights on the geologic framework, critical input to future hydrologic investigations. Aeromagnetic data map the western end of the Bear Wallow Canyon fault into the sedimentary fill of Verde Valley. Regional gravity data indicate potentially significant accumulations of low-density basin fill in Big Chino, Verde, and Williamson Valleys. Electrical and seismic data were also collected and help evaluate the approximate depth and extent of recent alluvium overlying Tertiary and Paleozoic sediments. These data will be used to ascertain the potential contribution of shallow ground-water subflow that cannot be measured by gages or flow meters and whether stream flow in losing reaches is moving as subflow or is being lost to the subsurface. The geophysical data will help produce a more robust groundwater flow model of the region.

Arizona↗

Geophysical analysis of the Salmon Peak Formation near Amistad Reservoir Dam, Val Verde County, Texas, and Coahuila, Mexico, March 2006, to aid in piezometer placement

Since 1992, numerous sinkholes have developed northwest of the Amistad Reservoir dam on the Rio Grande. Increases in the discharge of springs south of the dam, on the western side of the Rio Grande, in Coahuila, Mexico, have been documented. In 1995 the Mexico Section of the International Boundary and Water Commission (IBWC) completed a study of the western embankment (Coahuila, Mexico) of the dam that included surface geophysics, borehole geophysics, and installation of piezometers to learn more about subsurface conditions. As part of a 5-year safety inspection in 2005, technical advisors recommended that one line of similarly constructed piezometers be installed on the eastern embankment (Val Verde County, Texas) of the dam for comparison of water levels (potentiometric head) on both the western and eastern embankments of Amistad Reservoir dam. To provide technical assistance for the horizontal and vertical placement of piezometers on the eastern embankment of Amistad Reservoir dam, the U.S. Geological Survey, in cooperation with the U.S. Section of the IBWC, conducted a study along both the western and eastern embankments of Amistad Reservoir dam. The study involved an integrated approach using surface and borehole geophysical methods. In the western embankment investigation, geological and geophysical characteristics that indicate relatively large water-yielding properties of the Salmon Peak Formation were identified. The direct-current (DC) resistivity method was selected as the surface geophysical reconnaissance technique to correlate relatively large water-yielding properties of the Salmon Peak Formation, identified from analysis of borehole geophysical logs, with variations in subsurface resistivity. The dipole-dipole array and the reciprocal Schlumberger array were selected as the most applicable DC resistivity arrays. Two resistivity units were identified in both the dipole-dipole array data and the reciprocal Schlumberger array data along DC resistivity profiles on both embankments. Resistivity unit 1 generally is of relatively low resistivity, ranging from 45 to 150 ohm-meters compared with resistivity unit 2, which ranges from 120 to 345 ohm-meters (depending on the DC array type). The presence of mapped sinkholes in the reservoir north of the western embankment study area and the zone of increased water content (as indicated by zones of low neutron log count rates in nearby piezometers) leads to the conclusion that resistivity unit 1 is a preferential flow path where surface water from Amistad Reservoir is forced into the ground-water system (because of increased head from the reservoir). In the eastern embankment investigation, trends in the spatial distribution of sinkholes and the occurrence of weathered zones were identified from geologic descriptions of cores. The correlation of surface geophysical DC resistivity, historical lithologic data, and general trend of documented sinkholes along the eastern end of the eastern embankment profile were used to justify further exploration (drilling of piezometers) in the eastern expression of resistivity unit 1. The spatial location of the piezometers and the screened intervals were selected to best match the locations of the screened intervals of the western embankment piezometers. Six piezometers were installed on the eastern embankment and logged using borehole geophysical techniques. Surface DC resistivity sections superimposed on the resistivity logs for two piezometers indicate three discernible resistivity units that correlate with resistivity units 2, 1, and 2, respectively, identified in the western embankment study area. Resistivity units 1 and 2 in the DC resistivity profiles generally correspond with low and high resistivity zones, respectively, on the normal and lateral resistivity logs collected in the nearby piezometers at the time of installation.

Scientific Investigations Report↗

Hydrogeologic conceptualization of the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory, Edwards Air Force Base, Antelope Valley, California, 2017–21

Research and testing within the Air Force Research Laboratory at Edwards Air Force Base in the southwestern Mojave Desert has been conducted since the 1950s. This testing requires large quantities of groundwater for cooling and operations involving hazardous constituents that have entered the groundwater. To better understand the potential movement of contaminants through the groundwater system, the U.S. Geological Survey entered into a cooperative agreement with the U.S. Air Force Civil Engineer Center with the purpose of (1) gaining a more detailed understanding of the hydraulic connection between the unconsolidated basin-fill sediment and the underlying weathered and crystalline bedrock and (2) investigating faults and their potential effect on groundwater flow. This study was specific to the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory. The refined hydrogeologic characterization was derived by evaluating surface geologic maps, a regional gravity model, new subsurface geophysical surveys, lithology data from boreholes, and groundwater-level data. Refinement of the hydrogeologic characterization of the study area involved developing a map of basin-fill sediment thickness, estimating the geometry and depth to bedrock, determining the presence of weathered bedrock material, and identifying the location of faults and subsurface structures. The thickness of basin-fill sediment was derived from a regional gravity model. Basin-fill sediment ranges from less than 20 feet (ft) thick to about 150 ft thick and increases substantially toward a deep structural basin in the northwestern part of the study area. The top of bedrock estimated from the new surface geophysical surveys is generally deeper than the top of bedrock from the regional gravity model. These differences in interpreted bedrock tops indicate that there may be a zone of weathered bedrock in the subsurface, overlying crystalline bedrock. Additional subsurface data evaluating the geometry and thickness of weathered bedrock are necessary for a comprehensive evaluation of weathered bedrock in the study area. Previously unmapped extensions of the Leuhman Fault, Spring Fault Zone, and Boron Gate Fault were identified in the new surface geophysical surveys. Evaluation of groundwater flow between bedrock and basin-fill sediment, and the effects of faults on groundwater flow, was done using groundwater-level data from 2020. The groundwater table was in crystalline bedrock throughout most of the Arroyos and Northeast Air Force Research Laboratory subareas, with a few exceptions where it was in basin-fill sediment and weathered bedrock. Basin-fill sediment, and likely weathered bedrock, was partially saturated in parts of the study area where basin-fill sediment was as thick as 150 ft. Weathered bedrock material may be present near the Spring Fault Zone, and if so, was likely saturated in 2020. The groundwater-level data near and within Spring Fault Zone indicate that the Spring Fault Zone acts as a vertical-along-strike conduit for, and as an across-strike impediment to, groundwater flow. In addition, steep groundwater-level gradients in the southeastern part of the study area indicate that a subsurface structure affecting groundwater flow could be related to the Leuhman Fault. Sufficient groundwater-level data were not available to conclusively determine if the Arroyos, Rich, and Boron Gate Faults, and their inferred extensions from the geophysical surveys, affect the movement or direction of groundwater flow.

California↗

Geological, geochemical, and geophysical studies by the U.S. Geological Survey in Big Bend National Park, Texas

Big Bend National Park (BBNP), Tex., covers 801,163 acres (3,242 km 2 ) and was established in 1944 through a transfer of land from the State of Texas to the United States. The park is located along a 118-mile (190-km) stretch of the Rio Grande at the United States-Mexico border. The park is in the Chihuahuan Desert, an ecosystem with high mountain ranges and basin environments containing a wide variety of native plants and animals, including more than 1,200 species of plants, more than 450 species of birds, 56 species of reptiles, and 75 species of mammals. In addition, the geology of BBNP, which varies widely from high mountains to broad open lowland basins, also enhances the beauty of the park. For example, the park contains the Chisos Mountains, which are dominantly composed of thick outcrops of Tertiary extrusive and intrusive igneous rocks that reach an altitude of 7,832 ft (2,387 m) and are considered the southernmost mountain range in the United States. Geologic features in BBNP provide opportunities to study the formation of mineral deposits and their environmental effects; the origin and formation of sedimentary and igneous rocks; Paleozoic, Mesozoic, and Cenozoic fossils; and surface and ground water resources. Mineral deposits in and around BBNP contain commodities such as mercury (Hg), uranium (U), and fluorine (F), but of these, the only significant mining has been for Hg. Because of the biological and geological diversity of BBNP, more than 350,000 tourists visit the park each year. The U.S. Geological Survey (USGS) has been investigating a number of broad and diverse geologic, geochemical, and geophysical topics in BBNP to provide fundamental information needed by the National Park Service (NPS) to address resource management goals in this park. Scientists from the USGS Mineral Resources and National Cooperative Geologic Mapping Programs have been working cooperatively with the NPS and several universities on several research studies within BBNP. Because the last geologic map of the entire BBNP was published in the 1960s, one of the primary goals of the USGS is to provide a new geologic map of BBNP at a scale 1:100,000; this work is ongoing among the USGS, NPS, the Texas Bureau of Economic Geology, and university scientists. This USGS Circular summarizes eight studies funded and primarily carried out by the USGS, but it is not intended to be a comprehensive reference of work conducted in BBNP. This Circular describes topical research of the recently completed interdisciplinary USGS project, which has provided information leading to a more complete understanding of the following topics in BBNP: Tectonic and geologic history (Chapters 1, 2, and 3), Age and formation processes of a skarn mineral deposit (Chapter 4), Geoenvironmental effects of abandoned mercury mines (Chapter 5), Age, source, and geochemistry of surface and subsurface water resources (Chapter 6), Isotopic tracing of food sources of bears (Chapter 7), and Geophysical characteristics of surface and subsurface geology (Chapter 8). Additional information and the geochemical and geophysical data of the USGS studies in BBNP are available on line at http://minerals.cr.usgs.gov/projects/big_bend/index.html.

Texas↗

Geologic map of the Prescott National Forest and the headwaters of the Verde River, Yavapai and Coconino Counties, Arizona

This 1:100,000-scale digital geologic map details the complex Early Proterozoic metavolcanic and plutonic basement of north-central Arizona; shows the mildly deformed cover of Paleozoic rocks; reveals where Laramide to mid-Tertiary plutonic rocks associated with base- and precious-metals deposits are exposed; subdivides the Tertiary volcanic rocks according to chemically named units; and maps the Pliocene to Miocene fill of major basins. Associated digital files include more than 1,300 geochemical analyses of all rock units; 1,750 logs of water wells deeper than 300 feet; and interpreted logs of 300 wells that define the depth to basement in major basins. Geophysically interpreted buried features include normal faults defining previous unknown basins, mid-Tertiary intrusive rocks, and half-grabens within shallow bains.

Arizona↗

Application of borehole geophysics in defining the wellhead protection area for a fractured crystalline bedrock aquifer

Wellbore geophysical techniques were used to characterize fractures and flow in a bedrock aquifer at a site near Blackwater Brook in Dover, New Hampshire. The primary focus ofthis study was the development of a model to assist in evaluating the area surrounding a planned water supply well where contaminants introduced at the land surface might be induced to flow towards a pumping well. Well logs and geophysical surveys used in this study included lithologic logs based on examination of cuttings obtained during drilling; conventional caliper and natural gamma logs; video camera and acoustic televiewer surveys; highresolution vertical flow measurements under ambient conditions and during pumping; and borehole fluid conductivity logs obtained after the borehole fluid was replaced with deionized water. These surveys were used for several applications: 1) to define a conceptual model of aquifer structure to be used in groundwater exploration; 2) to estimate optimum locations for test and observation wells; and 3) to delineate a wellhead protection area (WHPA) for a planned water supply well. Integration of borehole data with surface geophysical and geological mapping data indicated that the study site lies along a northeast-trending intensely fractured contact zone between surface exposures of quartz monzonite and metasedimentary rocks. Four of five bedrock boreholes at the site were estimated to produce more than 150 gallons per minute (gpm) (568 L/min) of water during drilling. Aquifer testing and other investigations indicated that water flowed to the test well along fractures parallel to the northeast-trending contact zone and along other northeast and north-northwest-trending fractures. Statistical plots of fracture strikes showed frequency maxima in the same northeast and north-northwest directions, although additional maxima occurred in other directions. Flowmeter surveys and borehole fluid conductivity logging after fluid replacement were used to identify water-producing zones in the boreholes; fractures associated with inflow into boreholes showed a dominant northeast orientation. Borehole fluid conductivity logging after fluid replacement also gave profiles of such water-quality parameters as fluid electrical conductivity (FEC), pH, temperature, and oxidation-reduction potential, strengthening the interpretation of crossconnection of boreholes by certain fracture zones. The results of this study showed that the application of these borehole geophysical techniques at the Blackwater Brook site led to an improved understanding of such parameters as fracture location, attitude, flow direction and velocity, and water quality; all of which are important in the determination of a WHPA.

Log Analyst↗

Airborne electromagnetic survey results near the Poso Creek oil field, San Joaquin Valley, California, fall 2016

An airborne electromagnetic survey west of the Poso Creek oil field, located in the southeastern San Joaquin Valley, California, was flown in October 2016 to improve understanding of the hydrogeologic setting and the distribution of groundwater salinity in the area. The airborne electromagnetic data were used to develop resistivity models of the subsurface, where the mean depth of investigation is about 300 meters below the land surface and thus characterizes parts of the Kern River Formation and overlying sediments. Resistivity models along with water table elevation, historical total dissolved solids measurements of water samples from wells, well lithologic records, borehole geophysical logs, and mapped surface geology were used to develop an understanding of local hydrogeologic controls on resistivity. Interpretation of these data indicate the resistivity structure primarily reflects the general lithologic character and geologic structure of the study area, with more subtle influences from variations in saturation and salinity.

California↗

Eocene magma plumbing system beneath Cortez Hills Carlin-type gold deposit, Nevada: Is there a deep-seated pluton?

The magmatic-hydrothermal conceptual model for Carlin-type gold deposit genesis calls upon deep-seated Eocene plutons as the primary source of gold-bearing fluids. However, geophysical surveys, geologic mapping, drilling, geochronology, isotopic tracers, and fluid inclusion chemistry have returned ambiguous evidence for the existence of such plutons. The high-grade Cortez Hills gold deposit in northern Nevada hosts shallow, Eocene syn- and postmineralization intrusions, offering an ideal site to investigate the existence of a deep-seated pluton beneath the district. Here, major and trace element analyses of quartz-hosted melt inclusions from four Eocene rhyolite dikes cropping out within the Cortez Hills pit and results from independent thermobarometers provide a window into the subsurface Eocene magmatic plumbing system to test the existence of a deep-seated source pluton. Dissolved volatile contents, melt inclusion entrapment pressures, and thermodynamic phase equilibria indicate that dike magmas were sourced from ~4- to ≥9-km depth from a polybaric magma reservoir residing as a physically and geochemically interconnected crystal mush with extractable or eruptible magma pockets. Magmas ascended adiabatically (nearly isothermally), exsolving fluids, evolving modestly by fractional crystallization, while trapping quartz-hosted melt inclusions steadily from depth to subvolcanic levels where they were emplaced. These data represent the first unequivocal evidence for a deep-seated magma reservoir from which fluid-saturated magma emanated and released magmatic fluids beneath the Cortez district during gold mineralization. However, further investigation into the specific metallogenic potential and metal budget of parental magmas and the partitioning of gold between silicate melt and aqueous fluids will be necessary to provide evidence that exsolved magmatic fluids may have been gold bearing.

Nevada↗

Geographic, geologic, and hydrologic summaries of intermontane basins of the northern Rocky Mountains, Montana

This report combines a literature review with new information to provide summaries of the geography, geology, and hydrology of each of 32 intermontane basins in western Montana. The summary of each intermontane basin includes concise descriptions of topography, areal extent, altitude, climate, 1990 population, land and water use, geology, surface water, aquifer hydraulic characteristics, ground-water flow, and ground-water quality. If present, geothermal features are described. Average annual and monthly temperature and precipitation are reported from one National Weather Service station in each basin. Streamflow data, including the drainage area, period of record, and average, minimum, and maximum historical streamflow, are reported for all active and discontinued USGS streamflow-gaging stations in each basin. Monitoring-well data, including the well depth, aquifer, period of record, and minimum and maximum historical water levels, are reported for all long-term USGS monitoring wells in each basin. Brief descriptions of geologic, geophysical, and potentiometric- surface maps available for each basin also are included. The summary for each basin also includes a bibliography of hydrogeologic literature. When used alone or in conjunction with regional RASA reports, this report provides a practical starting point for site-specific hydrogeologic investigations.

Water-Resources Investigations Report↗

Magnetotelluric data collected near geophysically logged boreholes in the Española and Middle Rio Grande Basins, New Mexico

The Santa Fe region is growing rapidly. The Santa Fe Group aquifer in the Española Basin is the main source of municipal water for the region, and water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's ground-water resources. An important issue in managing the ground-water resources is a better understanding of the hydrogeology of the Tertiary Santa Fe Group. The Santa Fe Group includes the sedimentary deposits that fill the Rio Grande rift and contain the principal ground-water aquifers. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the Española Basin in northern New Mexico. Detailed geologic mapping, high-resolution airborne magnetic surveys, electromagnetic surveys, and hydrologic, lithologic, and hydro-geochemical data are being used to better understand the aquifer systems. Magnetotelluric (MT) surveys were completed as part of these studies. The primary purpose of the MT surveys was to map changes in electrical resistivity with depth that are related to differences in various rock types that help control the properties of aquifers in the region. Resistivity modeling of the MT data can be used to investigate buried structures related to the basic geologic framework of the study area. The purpose of this report is to release MT sounding data collected near geophysically logged boreholes in the study area, including the nearby Middle Rio Grande Basin. This MT data can be used in subsequent resistivity modeling. No interpretation of the data is included in this report.

New Mexico↗

Assessment of geothermal resources at Newcastle, Utah

Integrated geology, geophysics, and geochemistry studies in the Newcastle area of southwest Utah are used to develop a conceptual geologic model of a blind, moderate-temperature hydrothermal system. Studies using 12 existing and 12 new, thermal gradient test holes, in addition to geologic mapping, gravity surveys, and other investigations have helped define the thermal regime. Preliminary results indicate that the up-flow region is located near the west-facing escarpment of an adjacent mountain range, probably related to the bounding range-front fault. Chemical geothermometers suggest equilibration temperatures ranging from 140??C to 170??C. The highest temperature recorded in the system is 130??C from an exploration well drilled by the Unocal Corporation.

Conference Paper↗

Revised Cretaceous and Tertiary stratigraphic nomenclature in the Colville Basin, Northern Alaska

A revised stratigraphic nomenclature is proposed for Cretaceous and Tertiary geologic units of the central and western North Slope of Alaska. This revised nomenclature is a simplified and broadly applicable scheme suitable for a suite of digital geologic quadrangle maps being prepared jointly by the U.S. Geological Survey and the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas. This revised nomenclature scheme is a simplification of a complex stratigraphic terminology that developed piecemeal during five decades of geologic investigations of the North Slope. It is based on helicopter-supported geologic field investigations incorporating information from high-resolution aerial photography, satellite imagery, paleontology, reflection seismic records, and sequence stratigraphic concepts. This revised nomenclature proposes the abandonment of the Colville Group; demotion of the Nanushuk Group to formation status; abandonment of six formations (Kukpowruk, Tuktu, Grandstand, Corwin, Chandler, and Ninuluk); revision of four formations (Sagavanirktok, Prince Creek, Schrader Bluff, and Seabee); elevation of the Tuluvak Tongue of the Prince Creek Formation to formation status; revision of two members (Franklin Bluffs Member and Sagwon Member of the Sagavanirktok Formation); abandonment of eight members or tongues (Kogosukruk, Rogers Creek, Barrow Trail, Sentinel Hill, Ayiyak, Shale Wall, Niakogon, and Killik); and definition of one new member (White Hills Member of the Sagavanirktok Formation).

Professional Paper↗