Search USGS⌕ Search

SEARCH · Search USGS

Results for “The Seismic Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,669 records · Page 6Linked to original sources
USGS2025

Examining the role of elevated and sustained strain in dynamically triggering earthquakes on the Anza section of the San Jacinto fault

Microearthquakes can be dynamically triggered in southern California by remote earthquakes. However, directly connecting dynamic triggering mechanisms with observational data remains challenging. One proposed failure mechanism suggests that both the amplitude and duration of cyclic fatigue caused by the passing seismic wave contribute to triggering occurrence. Here, we measure dynamic strains recorded by borehole strainmeters in the Anza section of the San Jacinto fault zone from 710 earthquakes that occurred over 300 km away between 2008 and 2017 to systematically investigate the role of elevated and sustained strain in controlling dynamic triggering. We design a suite of tests to evaluate whether specific amplitude thresholds and durations of strain can predict dynamic triggering cases. We further test whether the peak dynamic strain (PDS) can predict triggering occurrence in combination with the strain amplitude and duration. Based on these tests, there is no strain amplitude–duration threshold that can distinguish triggering occurrence in Anza. Dynamic triggering is more likely to occur if a remote earthquake causes a PDS above 100 nanostrain, though many cases were triggered at smaller PDSs. The lack of clear correlation between triggering and characteristics of the dynamic strain field suggests that the tested features of the incoming waves do not determine triggering occurrence and local fault conditions and slip processes are more important in controlling dynamic triggering in Anza.

California↗
USGS2026

Hydrologic investigation of water level fluctuations at Moreau Lake, Moreau Lake State Park, town of Moreau, New York

The causes of water level fluctuations at Moreau Lake, within Moreau Lake State Park in the town of Moreau, New York, were investigated from 2016 to 2021 after lake water levels dropped between 2015 and 2016, raising concerns about the loss of a shallow swimming area at the park beach. Annual variation in precipitation records from the area did not account for the lake water level decline. Two possible causes for the low lake water levels were investigated: the increase in groundwater withdrawals from new residential development since about 2000 and seasonal changes (nongrowing and growing seasons) in precipitation. Investigation of the potential effects of nearby groundwater withdrawals required the compilation and collection of well-log data, seismic surveys, and measurements of lake and groundwater levels, field chemical parameters, and water isotopes to define the hydrogeologic system and to estimate water use. The net result of this work was the determination that Moreau Lake is a “flow though” lake with no surface water outlet; groundwater enters the lake on the upgradient side and exits through the downgradient side, however, groundwater does not flow southward from the lake toward nearby groundwater withdrawals from the semiconfined aquifer, and thus groundwater withdrawals were unlikely to have an effect on lake water levels. Investigation of the historic precipitation records during nongrowing (November through April) and growing (May through October) indicated that (1) nongrowing season precipitation from 2011–12 to 2015–16 was more deficient than any similar period during the past 78 years and (2) since about 2000, nongrowing seasons have been drier overall and growing seasons have been considerably wetter. Initiation of lake water level monitoring in 2016 provided an opportunity to compare seasonal precipitation with seasonal lake water level changes. Nongrowing season lake water levels are very sensitive to precipitation, such that high precipitation (40 percent above the seasonal median) resulted in a 5-foot rise in lake water level. In contrast, the growing season lake water levels are sensitive to dry conditions; for example, deficient rainfall (about 6 percent below the seasonal median) resulted in a decline of lake water levels of about 3.5 feet. However, lake water levels are insensitive to high growing season rainfall inputs (about 10 to 47 percent above the seasonal median); lake water levels consistently declined about by 0.8 feet above this range of seasonal excessive precipitation.

New York↗
USGS2024

Twentieth century extreme precipitation detected in a high-resolution, coastal lake-sediment record from California

California faces increasing economic and societal risks from extreme precipitation and flooding associated with atmospheric rivers (ARs) under projected twenty-first century climate warming. Lake sediments can retain signals of past extreme precipitation events, allowing reconstructions beyond the period of instrumental records. Here, we calibrate AR-related extreme precipitation from the last century to proxy data from lake sediments collected in the latitudinal zone of the highest frequency landfall for modern ARs in California. Excursions in erosional proxy data (Ti/Al) are positively and significantly correlated (r median = 0.45, p median = 0.04) with modern records of integrated vapor transport (IVT, kg m −1 s −1 ), a key metric of AR intensity, using correlations that incorporate age-model uncertainty. Despite the land-use change near the study site, the data suggest intense and long-lasting AR storms are identifiable in this sedimentary record. These results allow conservative inferences concerning past extreme hydrology at this site.

California↗
USGS2024

Correction to A regime shift in sediment export from a coastal watershed during a record wet winter, California: Implications for landscape response to hydroclimatic extremes

In the referenced article, the authors would like to correct text in the first paragraph on page 2571, Figure 9 and its caption. The changes reflect an error made in the processing of the rainfall intensity-duration data used to compare storms to published debris flow triggering thresholds. The correctly processed data does not change the interpretations made in the paper but does correctly indicate that the investigated storms did not exceed the rainfall intensity – duration threshold of Cannon (1988) but did significantly exceed the debris flow triggering threshold of Wieczorek (1987).

Earth Surface Processes and Landforms↗
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2026

Widespread abyssal turbidites record megathrust earthquake-triggered landslides and coseismic deformation in the Cascadia subduction zone

Abyssal marine turbidites provide some of the longest and most spatially extensive records of subduction zone earthquake recurrence globally; however, correlation of these deposits over long distances and interpretation of synchronous emplacement requires both an understanding of the turbidite generating systems and precise dating. Here, we present an integrated suite of high-resolution bathymetry, subbottom profiles, and sediment cores from combined autonomous underwater vehicle, remotely operated vehicle, and ship-based studies at a key paleoseismic site in the southern Cascadia subduction zone. We demonstrate how widespread, earthquake-triggered landslides on the lower slope deposit discrete, proximal mass transport deposits (MTDs) that grade offshore into complex, interfingered abyssal turbidites, which correspond to records of megathrust earthquake history. We propose accretion and oversteepening of thrust folds on the lower slope both preconditions the slope to fail and provides a perpetual source of unstable material to fail during every earthquake cycle. Furthermore, we suggest the periodic and pervasive landsliding indicates coseismic deformation of the outer accretionary wedge during megathrust rupture.

California, Oregon↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2024

(Re)discovering the seismicity of Antarctica: A new seismic catalog for the southernmost continent

We apply a machine learning (ML) earthquake detection technique on over 21 yr of seismic data from on‐continent temporary and long‐term networks to obtain the most complete catalog of seismicity in Antarctica to date. The new catalog contains 60,006 seismic events within the Antarctic continent for 1 January 2000–1 January 2021, with estimated moment magnitudes (⁠Mw ⁠) between −1.0 and 4.5. Most detected seismicity occurs near Ross Island, large ice shelves, ice streams, ice‐covered volcanoes, or in distinct and isolated areas within the continental interior. The event locations and waveform characteristics indicate volcanic, tectonic, and cryospheric sources. The catalog shows that Antarctica is more seismically active than prior catalogs would indicate, examples include new tectonic events in East Antarctica, seismic events near and around the vicinity of David Glacier, and many thousands of events in the Mount Erebus region. This catalog provides a resource for more specific studies using other detection and analysis methods such as template matching or transfer learning to further discriminate source types and investigate diverse seismogenic processes across the continent.

Seismological Research Letters↗
USGS2024

Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA

The time interval from Supercontinent Nuna assembly in the late Paleoproterozoic to Supercontinent Rodinia breakup in the Neoproterozoic is considered by some geologists to comprise the “Boring Billion,” an interval possibly marked by a slowdown in plate tectonic processes. In northeastern Washington State, USA, similar to much of western Laurentia, early workers generally thought the tectonostratigraphic framework of this interval of geologic time consisted of two major sequences, the (ca. 1480–1380 Ma) Mesoproterozoic Belt Supergroup and unconformably overlying (<720 Ma) Neoproterozoic Windermere Supergroup. However, recent research indicates that strata considered by early workers as Belt Supergroup equivalents are actually younger, and a post-Belt, pre-Windermere record is present within the <1360 Ma Deer Trail Group and <760 Ma Buffalo Hump Formation. Thus, the northeastern Washington region perhaps comprises the most complete stratigraphic record of the “Boring Billion” time interval in the northwestern United States and holds important insights into global Proterozoic supercontinent tectonic processes. In light of these exciting developments, this field guide will address the early historic economic geology and original mapping of these Proterozoic sequences in the northeastern Washington region, and from that foundation explore more recent isotopic provenance data and their regional to global context. Finally, the guide will end with a discussion of remaining questions with a goal of stimulating interest in these relatively understudied, yet important, rocks.

Washington↗
USGS2024

Seismic velocity changes from repetitive seismicity at Mauna Loa prior to and during its 2022 eruption

Mauna Loa’s short-lived eruption from late November to early December 2022 marked the culmination of nearly a decade of elevated seismic activity and geodetic inflation. The volcano has been monitored by a network of permanent, short period and broadband seismometers. I used the continuous waveform data from that network starting in 2012 to generate a catalog of seismicity that enhances the US Geological Survey Hawaiian Volcano Observatory’s public seismic catalog with four times the number of earthquakes, which were then grouped by waveform similarity. Analysis of subtle delays in the timing of arrivals of scattered waves between pairs of earthquakes in this catalog yields a history of small changes in the shallow seismic velocity structure of the volcano. Seismic velocities have been shown at other volcanoes to change during unrest and eruption. My results show a decrease in seismic velocity centered on the summit beginning in September 2022, corresponding to the onset of a vigorous precursory swarm of seismic activity and shallow inflation. During the eruption itself, I observe large changes due likely to dike opening along the northeast rift zone and deflation of the summit reservoir. However, seismic velocity changes associated with non-volcanic sources such as ground shaking from large earthquakes and meteorological influences at seasonal and diurnal time scales are also observed, and these dominate the velocity changes prior to the eruption. Proper accounting of these effects will be a requirement for use in real-time monitoring, and this work serves as a starting point in that endeavor for Mauna Loa.

Hawaii↗
USGS2025

Capturing the uncertainty of seismicity observations in earthquake rate estimates: Implications for probabilistic seismic hazard analysis and the USGS National Seismic Hazard Model

The rate of earthquakes in a region is a fundamental input to Probabilistic Seismic Hazard Analysis. We present a Monte Carlo method for computing that rate from seismicity catalogs while including a range of data and analysis uncertainties. This method is applied to regions for which the b value is assumed to be spatially invariant. Each region is broken down into epochs for which each epoch is estimated to have a uniform magnitude of completeness ( ⁠⁠ M c ). The distribution of earthquake rates for M ≥ M c is determined for each epoch by considering the Poisson likelihood of rates given the number of observed earthquakes with M ≥ M c ⁠ . We use a Monte Carlo process to include the uncertainty in b , ⁠ M c , and individual event magnitudes. The result for each epoch is the joint distribution of the Poisson rate of earthquakes with magnitudes larger than the minimum value used to calculate hazard ( ⁠⁠ M 1 ) and the Gutenberg–Richter b values, which control the extrapolation to other magnitudes. The rate for each region is either the duration‐weighted average over the epochs or, to better capture temporal variations, we also consider mixture models. The mixture models also provide an avenue to allow temporal variations in b values. To implement this joint distribution in a logic tree, we use the mean and 95% confidence branches, each of which is parameterized with an M ≥ M 1 rate and b value. We explore different ways of defining those branches, as well as non‐Gutenberg–Richter branches, and their impact on hazard estimates. The mean hazard, but not the fractiles, is robust with respect to these choices. To illustrate these new methods, we use synthetic data and catalogs from recent U.S. Geological Survey National Seismic Hazard Models for the Central and Eastern United States and for Puerto Rico and the U.S. Virgin Islands.

central and eastern United States, Puerto Rico, U.↗
USGS2025

Migration of seismicity from the mantle to the upper crust beneath Harrat Lunayyir volcanic field, Saudi Arabia

Harrat Lunayyir is a volcanic field in Saudi Arabia that experienced a Mw~5.4 earthquake driven by an upper-crustal dike intrusion in May 2009. This volcanic field has exhibited numerous forms of volcanic seismicity both prior to and since the 2009 dike intrusion. Significantly, earthquakes within the lithospheric mantle and, rarely, the lower crust are present in the two-decade long seismicity catalog of Harrat Lunayyir. Here we analyze 24 years of volcanic seismicity at Harrat Lunayyir from 1998 to 2022. We find that: 1) precursory seismicity began at least eight years prior to the 2009 event, with a particularly notable seismic episode one year prior; 2) lithospheric mantle seismicity is highly localized in space and in time, largely occurring in discrete sequences lasting on the order of a few hours to a few days; 3) one seismic sequence clearly migrates upward from the lithospheric mantle to the upper crust, including seismicity within the nominally ductile lower crust; 4) crustal seismicity has been slowly declining over time; and 5) lithospheric-mantle seismicity does not show any apparent decline with time. From these observations we infer that the seismicity is driven by magmatic fluids or volatiles, and seismic monitoring of this volcanic field should continue into the future.

Harrat Lunayyir volcanic field↗
USGS2026

Opportunities for the U.S. Geological Survey’s National Seismic Hazard Model to improve seismic risk assessment of critical infrastructure.

As fragility and risk modeling techniques and computational capabilities evolve, complemented by moving toward more routine and systematic seismic risk assessment of all buildings and critical infrastructure, the authors pose a few critical questions to investigate how the U.S. Geological Survey (USGS) National Seismic Hazard Models (NSHMs) can be used and enhanced further to serve such issues. In this paper, we use three examples from multiple sectors to (1) identify the role of USGS NSHMs in evaluating seismic risks to critical infrastructure, (2) quantify potential impacts from NSHM enhancements (i.e., [i] hazard curves for the vertical component of ground motion, [ii] stochastic event sets, and [iii] maps of probabilistic ground failure hazards), and (3) clarify the feasibility of relevant NSHM improvements. We illuminate that NSHMs are commonly used in location-specific performance assessments, whereas earthquake effects on critical infrastructure can be widespread across large geospatial regions. Further, we found that without the NSHM extensions considered here, risk can be severely underestimated, e.g., neglecting ground failure hazards can underestimate regional loss by a factor of two or more. Although many challenges remain, we developed example prototypes to clarify the feasibility of the NSHM extensions, which can facilitate improved management of risks to critical infrastructure.

Earthquake Spectra Journal↗