Search USGS⌕ Search

SEARCH · Search USGS

Results for “Tectonophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS1986

Mechanical response of the south flank of Kilauea volcano, Hawaii, to intrusive events along the rift systems

Increased earthquake activity and compression of the south flank of Kilauea volcano, Hawaii, have been recognized by previous investigators to accompany rift intrusions. We further detail the temporal and spatial changes in earthquake rates and ground strain along the south flank induced by six major rift intrusions which occurred between December 1971 and January 1981. The seismic response of the south flank to individual rift intrusions is immediate; the increased rate of earthquake activity lasts from 1 to 4 weeks. Horizontal strain measurements indicate that compression of the south flank usually accompanies rift intrusions and eruptions. Emplacement of an intrusion at a depth greater than about 4 km, such as the June 1982 southwest rift intrusion, however, results in a slight extension of the subaerial portion of the south flank. Horizontal strain measurements along the south flank are used to locate the January 1983 east-rift intrusion, which resulted in eruptive activity. The intrusion is modeled as a vertical rectangular sheet with constant displacement perpendicular to the plane of the sheet. This model suggests that the intrusive body that compressed the south flank in January 1983 extended from the surface to about 2.4 km depth, and was aligned along a strike of N66°E. The intrusion is approximately 11 km in length, extended beyond the January 1983 eruptive fissures, which are 8 km in length and is contained within the 14-km-long region of shallow rift earthquakes.

Hawaii↗
USGS1987

Nucleation and triggering of earthquake slip: Effect of periodic stresses

Results of stability analyses for spring and slider systems, with state variable constitutive properties, are applied to slip on embedded fault patches. Unstable slip may nucleate only if the slipping patch exceeds some minimum size. Subsequent to the onset of instability the earthquake slip may propagate well beyond the patch. It is proposed that the seismicity of a volume of the earth's crust is determined by the distribution of initial conditions on the population of fault patches that nucleate earthquake slip, and the loading history acting upon the volume. Patches with constitutive properties inferred from laboratory experiments are characterized by an interval of self-driven accelerating slip prior to instability, if initial stress exceeds a minimum threshold. This delayed instability of the patches provides an explanation for the occurrence of aftershocks and foreshocks including decay of earthquake rates by time −1 . A population of patches subjected to loading with a periodic component results in periodic variation of the rate of occurrence of instabilities. The change of the rate of seismicity for a sinusoidal load is proportional to the amplitude of the periodic stress component and inversely proportional to both the normal stress acting on the fault patches and the constitutive parameter, A 1 , that controls the direct velocity dependence of fault slip. Values of A 1 representative of laboratory experiments indicate that in a homogeneous crust, correlation of earthquake rates with earth tides should not be detectable at normal stresses in excess of about 8 MPa. Correlation of earthquakes with tides at higher normal stresses can be explained if there exist inhomogeneities that locally amplify the magnitude of the tidal stresses. Such amplification might occur near magma chambers or other soft inclusions in the crust and possibly near the ends of creeping fault segments if the creep or afterslip rates vary in response to tides. Observations of seismicity rate variations associated with seasonal fluctuations of reservoir levels appear to be consistent with the model.

Tectonophysics↗
USGS1987

Fault failure with moderate earthquakes

High resolution strain and tilt recordings were made in the near-field of, and prior to, the May 1983 Coalinga earthquake ( M L = 6.7, Δ = 51 km), the August 4, 1985, Kettleman Hills earthquake ( M L = 5.5, Δ = 34 km), the April 1984 Morgan Hill earthquake ( M L = 6.1, Δ = 55 km), the November 1984 Round Valley earthquake ( M L = 5.8, Δ = 54 km), the January 14, 1978, Izu, Japan earthquake ( M L = 7.0, Δ = 28 km), and several other smaller magnitude earthquakes. These recordings were made with near-surface instruments (resolution 10 −8 ), with borehole dilatometers (resolution 10 −10 ) and a 3-component borehole strainmeter (resolution 10 −9 ). While observed coseismic offsets are generally in good agreement with expectations from elastic dislocation theory, and while post-seismic deformation continued, in some cases, with a moment comparable to that of the main shock, preseismic strain or tilt perturbations from hours to seconds (or less) before the main shock are not apparent above the present resolution. Precursory slip for these events, if any occurred, must have had a moment less than a few percent of that of the main event. To the extent that these records reflect general fault behavior, the strong constraint on the size and amount of slip triggering major rupture makes prediction of the onset times and final magnitudes of the rupture zones a difficult task unless the instruments are fortuitously installed near the rupture initiation point. These data are best explained by an inhomogeneous failure model for which various areas of the fault plane have either different stress-slip constitutive laws or spatially varying constitutive parameters. Other work on seismic waveform analysis and synthetic waveforms indicates that the rupturing process is inhomogeneous and controlled by points of higher strength. These models indicate that rupture initiation occurs at smaller regions of higher strength which, when broken, allow runaway catastrophic failure.

California↗
USGS1987

Modelling aftershock migration and afterslip of the San Juan Bautista, California, earthquake of October 3, 1972

The San Juan Bautista earthquake of October 3, 1972 ( M L = 4.8), located along the San Andreas fault in central California, initiated an aftershock sequence characterized by a subtle, but perceptible, tendency for aftershocks to spread to the northwest and southeast along the fault zone. The apparent dimension of the aftershock zone along strike increased from about 7–10 km within a few days of the earthquake, to about 20 km eight months later. In addition, the mainshock initiated a period of accelerated fault creep, which was observed at 2 creep meters situated astride the trace of the San Andreas fault within about 15 km of the epicenter of the mainshock. The creep rate gradually returned to the preearthquake rate after about 3 yrs. Both the spreading of the aftershocks and the rapid surface creep are interpreted as reflecting a period of rapid creep in the fault zone representing the readjustment of stress and displacement following the failure of a “stuck” patch or asperity during the San Juan Bautista earthquake. Numerical calculations suggest that the behavior of the fault zone is consistent with that of a material characterized by a viscosity of about 3.6×10 14 P, although the real rheology is likely to be more complicated. In this model, the mainshock represents the failure of an asperity that slips only during earthquakes. Aftershocks represent the failure of second-order asperities which are dragged along by the creeping fault zone.

California↗
USGS1987

The crustal structure of the axis of the Great Valley, California, from seismic refraction measurements

In 1982 the U.S. Geological Survey collected six seismic refraction profiles in the Great Valley of California: three axial profiles with a maximum shot-to-receiver offset of 160 km, and three shorter profiles perpendicular to the valley axis. This paper presents the results of two-dimensional raytracing and synthetic seismogram modeling of the central axial profile. The crust of the central Great Valley is laterally heterogeneous along its axis, but generally consists of a sedimentary section overlying distinct upper, middle, and lower crustal units. The sedimentary rocks are 3-5 km thick along the profile, with velocities increasing with depth from 1.6 to 4.0 km/s. The basement (upper crust) consists of four units: 1. (1) a 1.0-1.5 km thick layer of velocity 5.4-5.8 km/s, 2. (2) a 3-4 km thick layer of velocity 6.0-6.3 km/s, 3. (3) a 1.5-3.0 km thick layer of velocity 6.5-6.6 km/s, and 4. (4) a laterally discontinuous, 1.5 km thick layer of velocity 6.8-7.0 km/s. The mid-crust lies at 11-14 km depth, is 5-8 km thick, and has a velocity of 6.6-6.7 km/s. On the northwest side of our profile the mid-crust is a low-velocity zone beneath the 6.8-7.0 km/s lid. The lower crust lies at 16-19 km depth, is 7-13 km thick, and has a velocity of 6.9-7.2 km/s. Crustal thickness increases from 26 to 29 km from NW to SE in the model. Although an unequivocal determination of crustal composition is not possible from P-wave velocities alone, our model has several geological and tectonic implications. We interpret the upper 7 km of basement on the northwest side of the profile as an ophiolitic fragment, since its thickness and velocity structure are consistent with that of oceanic crust. This fragment, which is not present 10-15 km to the west of the refraction profile, is probably at least partially responsible for the Great Valley gravity and magnetic anomalies, whose peaks lie about 10 km east of our profile. The middle and lower crust are probably gabbroic and the product of magmatic or tectonic underplating, or both. The crustal structure of the Great Valley is dissimilar to that of the adjacent Diablo Range, suggesting the existence of a fault or suture zone throughout the crust between these provinces.

California↗
USGS1987

Tectonic rotations south of the Bohemian Massif from palaeomagnetic directions of Permian red beds in Hungary

Palaeomagnetic studies were carried out in Permian red beds of the Balaton Highlands, the Mecsek Mountains and the Bükk Mountains of Hungary. Statistically well defined directions were obtained from six localities in the Balaton Highlands and two localities in the Mecsek Mountains. No meaningful results were obtained from the Bükk Mountains. Three magnetic components were identified from red beds of the Balaton Highlands: (1) in haematite with a very high unblocking temperature (700°C), interpreted as a Permian magnetization (D c = 79°, I c = -11°, k = 24, α 95 = 13.6°), in six samples from three beds in a single locality (2) a secondary but ancient component residing mainly inmaghemite (D = 314°, I = 49°, k = 48, α 95 = 10.0°), in 84 samples from six localities with a within-locality scatter increasing on unfolding; and (3) a direction parallel to the present field (D = 7°, I = 62°, k = 46, α 95 =7.7°), in nine samples from a single locality. For the Balaton Highlands, the component 1 direction agrees with directions obtained from Permian red beds and volcanics in the eastern part of the Southern and Eastern Alps and the Inner West Carpathians. All show large, apparent rotations relative to stable Europe since the Permian. Component 2 is of post-folding (post-Aptian) age. Its direction agrees with known Late Cretaceous directions from the Transdanubian Central Mountains, which also show significant counterclockwise rotation relative to stable Europe. The characteristic magnetization for the Mecsek Mountains resides in haematite and may be primary. The directions indicate only a slight net counterclockwise rotation of the Mecsek Mountains with respect to stable Europe since the Permian.

Tectonophysics↗
USGS1987

Accretion of southern Alaska

Paleomagnetic data from southern Alaska indicate that the Wrangellia and Peninsular terranes collided with central Alaska probably by 65 Ma ago and certainly no later than 55 Ma ago. The accretion of these terranes to the mainland was followed by the arrival of the Ghost Rocks volcanic assemblage at the southern margin of Kodiak Island. Poleward movement of these terranes can be explained by rapid motion of the Kula oceanic plate, mainly from 85 to 43 Ma ago, according to recent reconstructions derived from the hot-spot reference frame. After accretion, much of southwestern Alaska underwent a counterclockwise rotation of about 50 ?? as indicated by paleomagnetic poles from volcanic rocks of Late Cretaceous and Early Tertiary age. Compression between North America and Asia during opening of the North Atlantic (68-44 Ma ago) may account for the rotation.

Alaska↗
USGS1987

Spectral analysis of topography and gravity in the Basin and Range Province

A two-dimensional spectral analysis has been carried out for the topography and the Bouguer gravity anomaly of the Basin and Range Province in western North America. The aim was to investigate the possible presence of dominant wavelengths in the deformation pattern at the surface and at the depth of compensation. The results suggest that a 200-km wavelength in the deep compensating mass distribution has been inherited from an early tectonic phase of extension at an azimuth N65??E. The corresponding surface topography exhibits prominent overtones at wavelength of 100, 75, and possibly 45 km. It is argued that these characterize the non-linear rheology of the upper crust. The short wavelengths in the topography reflect the present phase of deformation, mixed with the results of the older deformations. These results point to a need to extend the physical models of lithospheric stretching beyond the presently available one-phase scenario. However, they show that the boudinage instability concept is consistent with the data.

Arizona, California, Nevada, New Mexico, Utah↗
USGS1988

Radon measurements for earthquake prediction along the North Anatolian Fault Zone: A progress report

Radon ( 222 Rn) concentration has been continuously measured since 1983 in groundwater at a spring and in subsurface soil gas at five sites along a 200 km segment of the North Anatolian Fault Zone near Bolu, Turkey. The groundwater radon concentration showed a significant increase before the Biga earthquake of magnitude 5.7 on 5 July 1983 at an epicentral distance of 350 km, and a long-term increase between March 1983 and April 1985. The soil-gas radon concentration showed large changes in 1985, apparently not meteorologically induced. The soil-gas and groundwater data at Bolu did not show any obvious correlation.

Tectonophysics↗
USGS1988

Seismic anisotropy in mylonites: An example from the Mannin Thrust Zone, southwest Connemara, Ireland

Mylonites associated with the Mannin Thrust zone of southwesternmost Connemara formed when the high-grade metamorphic rocks typical of most of the Connemara massif were thrust to the southeast over low metamorphic grade (low greenschist facies?) acid volcanics and volcaniclastic sediments, while being metamorphosed in the epidote-amphibolite facies. Triaxial and biaxial ultrasonic velocity measurements of mylonite specimens from a 240 m borehole have established that there is significant seismic anisotropy up to about 11% when comparing velocities perpendicular and parallel to the foliation. This would ultimately lead to a reflection coefficient of about 0.02 when comparing the mean "isotropic" seismic velocity with that perpendicular to the foliation. The finely striped, discontinunous mineral lithons that define mylonitic foliation, but which form no real and continuous surfaces, could interact with seismic energy to produce "reflections" that do not relate to lithological contacts within the rocks but to a tectonically induced, orientated acoustic impedance. However, the results support the work of others in suggesting that on its own the fabric would not produce the high amplitude reflections observed on deep seismic lines and other mechanisms need to be investigated.

southwest Connemara↗
USGS1988

Aftershocks of the western Argentina (Caucete) earthquake of 23 November 1977: Some tectonic implications

An aftershock survey, using a network of eight portable and two permanent seismographs, was conducted for the western Argentina (Caucete) earthquake ( M S 7.3) of November 23, 1977. Monitoring began December 6, almost 2 weeks after the main shock and continued for 11 days. The data set includes 185 aftershock hypocenters that range in the depth from near surface to more than 30 km. The spatial distribution of those events occupied a volume of about 100 km long ×50 km wide ×30 km thick. The volumnar nature of the aftershock distribution is interpreted to be a result of a bimodal distribution of foci that define east- and west-dipping planar zones. Efforts to select which of those zones was associated with the causal faulting include special attention to the determination of the mainshock focal depth and dislocation theory modeling of the coseismic surface deformation in the epicentral region. Our focal depth (25–35 km) and modeling studies lead us to prefer an east-dipping plane as causal. A previous interpretation by other investigators used a shallower focal depth (17 km) and similar modeling calculations in choosing a west-dipping plane. Our selection of the east-dipping plane is physically more appealing because it places fault initiation at the base of the crustal seismogenic layer (rather than in the middle of that layer) which requires fault propagation to be updip (rather than downdip).

Tectonophysics↗
USGS1989

Origin of the oceanic basalt basement of the Solomon Islands arc and its relationship to the Ontong Java Plateau-insights from Cenozoic plate motion models

Cenozoic global plate motion models based on a hotspot reference frame may provide a useful framework for analyzing the tectonic evolution of the Solomon Islands convergent margin. A postulated late Miocene collision of the Ontong Java Plateau (OJP) with a NE-facing arc is consistent with the predicted path of the OJP across the Pacific Basin and its Miocene arrival at the trench. Late-stage igneous activity (65-30 Ma) predicted for the OJP as it rode over the Samoan hotspot occurred in correlative stratigraphic sections on Malaita, the supposed accreted flake of OJP in the Solomon Islands arc. Convergence similar to the present velocities between Australia and the Pacific plates was characteristic of the last 43 million years. Prior to 43 Ma Pacific-Australia plate motions were divergent, seemingly at odds with geologic evidence for early Tertiary convergence, particularly in Papua New Guinea. A postulated South Pacific plate may have existed between Australia and the Pacific plate and would have allowed implied northward subduction along the northeastern Australia plate boundary that lasted into the early Eocene. Subsequent reorganization of plate motions in the middle Eocene correlates with middle Eocene marginal basin formation along ridges oblique to the main plate boundary. Cessation of spreading on the Pacific-South Pacific Ridge and its subsequent subduction beneath Asia followed the change in Pacific plate motion at 43 Ma. A trapped remnant of the extinct, NW-trending ridge may still lie beneath the western Philippine Sea. The terminal deformation, metamorphism and ophiolite obduction in the Eocene orogen of the southwest Pacific also correlates with the major change in Pacific plate motion at 43 Ma and the subsequent compression of the dying Eocene arc against outlying continental and oceanic crustal blocks of the Australian plate. The Solomon Islands oceanic basement may represent juxtaposition of oceanic plateaus of the Australian plate beneath overthrust, dismembered ophiolite derived from adjacent marginal basin crust.

Tectonophysics↗
USGS1989

United States National seismograph network

The USGS National Earthquake Information Center (NEIC) has planned and is developing a broadband digital seismograph network for the United States. The network will consist of approximately 150 seismograph stations distributed across the contiguous 48 states and across Alaska, Hawaii, Puerto Rico and the Virgin Islands. Data transmission will be via two-way satellite telemetry from the network sites to a central recording facility at the NEIC in Golden, Colorado. The design goal for the network is the on-scale recording by at least five well-distributed stations of any seismic event of magnitude 2.5 or greater in all areas of the United States except possibly part of Alaska. All event data from the network will be distributed to the scientific community on compact disc with read-only memory (CD-ROM).

Puerto Rico, U.S. Virgin Islands↗
USGS1989

How the growth and freeboard of continents may relate to geometric and kinematic parameters of mid-ocean spreading ridges

If the volume of continents has been growing since 4 Ga then the area of the ocean basins must have been shrinking. Therefore, by inferring a constant continental freeboard, in addition to constant continental crustal thicknesses and seawater volume, it is possible to calculate the necessary combinations of increased ridge lengths and spreading rates required to displace the seawater in the larger oceans of the past in order to maintain the constant freeboard. A reasonable choice from the various possibilities is that at 4 Ga ago, the ridge length and spreading rates were ca. 2.5 times greater than the averages of these parameters during the past 200 Ma. By 2.5 Ga ago the ridge length and spreading rate decreased to about 1.8 times the recent average and by 1 Ga ago these features became reduced to approximately 1.4 times recent averages.

Tectonophysics↗
USGS1989

The Richter scale: its development and use for determining earthquake source parameters

The M L scale, introduced by Richter in 1935, is the antecedent of every magnitude scale in use today. The scale is defined such that a magnitude-3 earthquake recorded on a Wood-Anderson torsion seismometer at a distance of 100 km would write a record with a peak excursion of 1 mm. To be useful, some means are needed to correct recordings to the standard distance of 100 km. Richter provides a table of correction values, which he terms -log A o , the latest of which is contained in his 1958 textbook. A new analysis of over 9000 readings from almost 1000 earthquakes in the southern California region was recently completed to redetermine the -log A o values. Although some systematic differences were found between this analysis and Richter's values (such that using Richter's values would lead to under and overestimates of M L at distances less than 40 km and greater than 200 km, respectively), the accuracy of his values is remarkable in view of the small number of data used in their determination. Richter's corrections for the distance attenuation of the peak amplitudes on Wood-Anderson seismographs apply only to the southern California region, of course, and should not be used in other areas without first checking to make sure that they are applicable. Often in the past this has not been done, but recently a number of papers have been published determining the corrections for other areas. If there are significant differences in the attenuation within 100 km between regions, then the definition of the magnitude at 100 km could lead to difficulty in comparing the sizes of earthquakes in various parts of the world. To alleviate this, it is proposed that the scale be defined such that a magnitude 3 corresponds to 10 mm of motion at 17 km. This is consistent both with Richter's definition of M L at 100 km and with the newly determined distance corrections in the southern California region. Aside from the obvious (and original) use as a means of cataloguing earthquakes according to size, ML has been used in predictions of ground shaking as a function of distance and magnitude; it has also been used in estimating energy and seismic moment. There is a good correlation of peak ground velocity and the peak motion on a Wood-Anderson instrument at the same location, as well as an observationally defined (and theoretically predicted) nonlinear relation between M L and seismic moment. An important byproduct of the establishment of the M L scale is the continuous operation of the network of Wood-Anderson seismographs on which the scale is based. The records from these instruments can be used to make relative comparisons of amplitudes and waveforms of recent and historic earthquakes; furthermore, because of the moderate gain, the instruments can write onscale records from great earthquakes at teleseismic distances and thus can provide important information about the energy radiated from such earthquakes at frequencies where many instruments have saturated.

California↗
USGS1989

Dikes, joints, and faults in the upper mantle

Three different types of macroscopic fractures are recognized in upper-mantle and lower-crustal xenoliths in volcanic rocks from around the world: 1. (1) joints that are tensile fractures not occupied by crystallized magma products 2. (2) dikes that are tensile fractures occupied by mafic magmas crystallized to pyroxenites, gabbros or hydrous-mineral-rich rocks, 3. (3) faults that are unfilled shear fractures with surface markings indicative of shear displacement. In addition to intra-xenolith fractures, xenoliths commonly have polygonal or faceted shapes that represent fractures exploited during incorporation of the xenoliths into the host magma that brought them to the surface. The various types of fractures are considered to have formed in response to the pressures associated with magmatic fluids and to the ambient tectonic stress field. The presence of fracture sets and crosscutting relations indicate that both magma-filled and unfilled fractures can be contemporaneous and that the local stress field can change with time, leading to repeated episodes of fracture. These observations give insight into the nature of deep fracture processes and the importance of fluid-peridotite interactions in the mantle. We suggest that unfilled fractures were opened by volatile fluids exsolved from ascending magmas to the tops of growing dikes. These volatile fluids are important because they are of low viscosity and can rapidly transmit fluid pressure to dike and fault tips and because they lower the energy and tectonic stresses required to extend macroscopic cracks and to allow sliding on pre-existing fractures. Mantle seismicity at depths of 20-65 km beneath active volcanic centers in Hawaii corresponds to the depth interval where CO2-rich fluids are expected to be liberated from ascending basaltic magmas, suggesting that such fluids play an important role in facilitating earthquake instabilities in the presence of tectonic stresses. Other phenomena related to the fractures include permeation of peridotite by fluid inclusions derived by degassing of magmas, partial melting of peridotite and dike rocks, and metasomatic alteration of peridotite host rock by magmas emplaced in fractures. These effects of magmatism generally reduce the bulk density of peridotite and might also reduce seismic velocities. The velocity contrasts between fractured and unfractured peridotite might be detected by seismic-velocity profiling techniques.

Tectonophysics↗
USGS1989

Geology of the Zambales ophiolite, Luzon, Philippines

The Zambales ophiolite of western Luzon, Philippines, exposes a typical succession of basalt flows, diabasic dikes, gabbro and tectonized harzburgite. The age established by limiting strata is late Eocene. Lack of evidence of thrust faulting and the general domal disposition of the lithologie units indicate that the ophiolitic rocks are exposed by uplift. Highly complex internal layered structures within the complex are related to processes developed during formation of the ophiolite and the Zambales ophiolite may be one of the least disturbed (by emplacement) ophiolitic masses known. The exposed mass trends north and the upper surface plunges at low angles (a few degrees) to the north and south. The chemistry and composition of the rocks in the northwest part of the Zambales area (Acoje block) is distinct from that in the southeastern segment (Coto block). The Acoje block, according to Evans (1983) and Hawkins and Evans (1983), resembles (on a chemical basis) arc-tholeiite series rocks from intra-island arcs and the rocks in the Coto block are typical back-arc basin rock series. The present writer believes that the ophiolite composes a single genetic unit and that the changes in composition are the result of changes that took place during the initial formation. The gabbro probably formed below a spreading center in an elongate, in cross section, V-shaped, magma chamber. The gabbro is estimated by the writer to be less than 2 km thick and may be less than 1 km in places. Numerous erosional windows through the gabbro in the northern and eastern side of the Zambales area show that the gabbro remaining in those areas is likely to be only a few hundred meters thick. Harzburgite is exposed to a depth of about 800 m in the Bagsit River area and this may be the deepest part of the ophiolite accessible for study on which there is any control on depth. A transitional zone, about 200 m thick lying between the gabbro and harzburgite, is composed of serpentinized dunite. Commonly the dunite contains disseminated sulfide minerals and at the Acoje Mines, platinum-group elements. A compositional layering within the gabbro is in places cumulate in the lower part of the unit but may have formed by nucleation higher up on the relatively steep sides of the magma chamber. A widespread gneissic banding in the gabbro forms large mappable structures which are many times more complex than is the disposition of the major rock units. These structures are believed to be the result of extensive slumping in the magma chamber. The structure produced by the cumulate layering merges with the gneissic banding, commonly without discernible change in attitude. This tectonic layered structure crosses the gabbro-peridotite boundary at any angle without seeming to disturb the original rock distribution. At greater depths below the boundary (ca. 800 m), the harzburgite contains low dipping banding, which probably reflects the result of differential movement within the mantle. Chromite occurs almost exclusively in a zone that generally lies no more than 200–300 m below the gabbro-peridotite boundary. Refractory-grade chromite is found in this zone below the olivine gabbro in the Goto block and as low-grade metallurgical grade chromite below norite in the Acoje block. At Acoje Mines the chromite is present in layers in dunite, which the writer interprets as being distributed in a zone along the gently dipping (ca. 25°) gabbro-peridotite boundary. The steeply dipping (ca. 60–80 ° ) individual layers lie en echelon along the boundary at an angle (ca. 50 ° ) to the contact. At Coto the chromite forms large discontinuous masses in the lowest dunite and in the uppermost harzburgite. Except for the chromite present as layers at Acoje, the regional tectonic layering crosses the chromite deposits without structural deviation. The chromite deposits and associated peridotite may be cumulate in origin, but have been modified to such an extent that cumulate textures are generally obliterated. The angle of repose of cumulate layers in the Acoje area and in the Coto block dip towards each other raising the possibility that the Zambales area may contain the relics of a spreading center. Initial emplacement of the Zambales ophiolite took place by uplift and the ultramafic portion was exposed to erosion in the earliest Miocene or late Oligocene. Submergence of some of the ophiolite followed the previous uplift and on the west side of the Zambales Range submergence of several kilometers is indicated. Final emergence appears to have taken place in Pliocene or Pleistocene time by block uplift and areas of greatest uplift closely conform to the present topographic surface.

Tectonophysics↗
USGS1989

Tectonic erosion at the front of the Japan trench convergent margin

The imaging of a multichannel seismic record was improved by reprocessing using pre-stack techniques. The reprocessed record shows structures that indicate tectonic erosion and gravity collapse at the front of the Japan trench margin. Much of the lower slope appears to be underlain by a detached, coherent block of continental crust. The lower slope has failed by mass wasting and the resulting apron of slump debris at the base of the slope has become involved in thrust faulting at the front of the subduction zone. Slumping continues as long as debris is removed from the front of the margin by subduction, and the apron cannot build up sufficiently to stabilize the failing lower slope. Truncated beds at the base of the upper plate indicate subcrustal erosion as well, this probably being the main cause of massive subsidence of the margin. Subsidence was the cause of oversteepening, destabilization and subsequent gravity collapse of the leading edge of the upper plate.

Tectonophysics↗