SEARCH · Search USGS

Results for “Scanning Electron Microscopy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS2019

The effect of brine on the electrical properties of methane hydrate

Gas hydrates possess lower electrical conductivity (inverse of resistivity) than either seawater or ice, but higher than clastic silts and sands, such that electromagnetic methods can be employed to help identify their natural formation in marine and permafrost environments. Controlled laboratory studies offer a means to isolate and quantify the effects of changing individual components within gas‐hydrate‐bearing systems, in turn yielding insight into the behavior of natural systems. Here we investigate the electrical properties of polycrystalline methane hydrate with ≥25% gas‐filled porosity and in mixture with brine. Initially, pure methane hydrate was synthesized from H 2 O ice and CH 4 gas while undergoing electrical impedance measurement, then partially dissociated to assess the effects of pure pore water accumulation on electrical conductivity. Methane hydrate + brine mixtures were then formed by either adding NaCl (0.25–2.5 wt %) to high‐purity ice or by using frozen seawater as a reactant. Conductivity was obtained from impedance measurements made in situ throughout synthesis while temperature cycled between +15 °C and −25 °C. Several possible conduction mechanisms were subsequently determined using equivalent circuit modeling. Samples with low NaCl concentration show a doping/impurity effect and a log linear conductivity response as a function of temperature. For higher salt content samples, conductivity increases exponentially with temperature and the log linear relationship no longer holds; instead, we observe phase changes within the samples that follow NaCl–H 2 O–CH 4 phase equilibrium predictions. Final samples were quenched in liquid nitrogen and imaged by cryogenic scanning electron microscopy (cryo‐SEM) to assess grain‐scale characteristics.

Journal of Geophysical Research↗

USGS2020

Laboratory electrical conductivity of marine gas hydrate

Methane hydrate was synthesized from pure water ice and flash frozen seawater, with varying amounts of sand or silt added. Electrical conductivity was determined by impedance spectroscopy, using equivalent circuit modeling to separate the effects of electrodes and to gain insight into conduction mechanisms. Silt and sand increase the conductivity of pure hydrate, we infer by contaminant NaCl contributing to conduction in hydrate, to values in agreement with resistivities observed in well logs through hydrate The addition of silt and sand lowers the conductivity of hydrate synthesized from seawater by an amount consistent with Archie's Law. All samples were characterized using cryogenic scanning electron microscopy and energy dispersive spectroscopy, which show good connectivity of salt and brine phases. Electrical conductivity measurements of pure hydrate and hydrate mixed with silt during pressure‐induced dissociation supports previous conclusions that sediment increases dissociation rate.

Geophysical Research Letters↗

USGS2022

Microbially induced anaerobic oxidation of magnetite to maghemite in a hydrocarbon-contaminated aquifer

Iron mineral transformations occurring in hydrocarbon-contaminated sites are linked to the biodegradation of the hydrocarbons. At a hydrocarbon-contaminated site near Bemidji, Minnesota, USA, measurements of magnetic susceptibility (MS) are useful for monitoring the natural attenuation of hydrocarbons related to iron cycling. However, a transient MS, previously observed at the site, remains poorly understood and the iron mineral phases acting as reactants and products associated with this MS perturbation remain largely unknown. To address these unknowns, we acquired mineral magnetism measurements, including hysteresis loops, backfield curves, and isothermal remanent magnetizations on sediment core samples retrieved from the site and magnetite-filled mineral packets installed within the aquifer. Our data show that the core samples and magnetite packs display decreasing magnetization with time and that this loss in magnetization is accompanied by increasing bulk coercivity consistent with decreased average grain size and/or partial oxidation. Low-temperature magnetometry on all samples displayed behavior consistent with magnetite, but samples within the plume also show evidence of maghemitization. This interpretation is supported by the occurrence of shrinkage cracks on the surface of the grains imaged via scanning electron microscopy. Magnetite transformation to maghemite typically occurs under oxic conditions, here, we propose that maghemitization occurs within the anoxic portions of the plume via microbially mediated anaerobic oxidation. Mineral dissolution also occurs within the plume. Microorganisms capable of such anaerobic oxidation have been identified within other areas at the Bemidji site, but additional microbiological studies are needed to link specific anaerobic iron oxidizers with this loss of magnetization.

Minnesota↗

USGS2020

Morphological, elemental, and boron isotopic insights into pathophysiology of diseased coral growth anomalies

Growth anomalies (GAs) impact both coral skeleton and soft tissues and are detrimental to reef health. This tumor-like disease is increasingly found throughout the tropics and is commonly associated with high human population density, yet little is known about the etiology, pathology, or calcification behavior of the disease. Here, we investigate potential mechanisms involved in the development of GAs through chemical and morphological characterization of GA skeletons in Porites compressa from a site of high disease prevalence (Coconut Island, Hawaii). A comprehensive suite of trace elements and boron isotopes (δ11B) were measured in skeletal GAs to assess calcification behavior and uptake of essential and toxic metals. Scanning electron microscopy of GA skeleton revealed it to be highly porous consisting of a matrix with a disorganized crystal structure, in contrast to the dense well-organized normal skeleton of P. compressa. Elemental analyses revealed decreased Mg/Ca and increased U/Ca in GA skeletons relative to paired unaffected samples, suggesting a decreased abundance of rapidly accreting microstructures “centers of calcification” in the GAs. Estimates of carbonate system parameters based on δ11B and B/Ca measurements indicate reduced pH (–0.05 units) and [CO32–] within the calcifying fluid of GAs, which may have implications for GA calcification. Higher levels of essential (V/Ca and Mo/Ca) elements in GAs potentially indicate increased abundance of holobiont-associated, nitrogen-fixing bacteria and higher Sb/Ca and Nd/Ca indicate alteration in the accumulation/depuration of these toxic metals. In aggregate, our findings show that dystrophic calcification processes could explain structural differences seen in GA vs unaffected skeletons and highlight the use of approaches herein to shed light on disease pathophysiology in corals.

Scientific Reports↗

USGS2024

Cathodoluminescence differentiates sedimentary organic matter types

High-resolution scanning electron microscopy (SEM) visualization of sedimentary organic matter is widely utilized in the geosciences for evaluating microscale rock properties relevant to depositional environment, diagenesis, and the processes of fluid generation, transport, and storage. However, despite thousands of studies which have incorporated SEM methods, the inability of SEM to differentiate sedimentary organic matter types has hampered the pace of scientific advancement. In this study, we show that SEM-cathodoluminescence (CL) properties can be used to identify and characterize sedimentary organic matter at low thermal maturity conditions. Eleven varied mudstone samples with a broad array of sedimentary organic matter types, ranging from the Paleoproterozoic to Eocene in age, were investigated. Sedimentary organic matter fluorescence intensity and CL intensity showed an almost one-to-one correspondence, with certain exceptions in three samples potentially related to radiolytic alteration. Therefore, because CL emission can be used as a proxy for fluorescence emission from sedimentary organic matter, CL emission during SEM visualization can be used to differentiate fluorescent from non-fluorescent sedimentary organic matter. This result will allow CL to be used as a visual means to quickly differentiate sedimentary organic matter types without employing correlative optical microscopy and could be widely and rapidly adapted for SEM-based studies in the geosciences.

Scientific Reports↗

USGS2018

KG²B, a collaborative benchmarking exercise for estimating the permeability of the Grimsel granodiorite - Part 2: modeling, microstructures and complementary data

Measuring and modelling the permeability of tight rocks remains a challenging task. In addition to the traditional sources of errors that affect more permeable formations (e.g. sample selection, non-representative specimens, disturbance introduced during sample acquisition and preparation), tight rocks can be particularly prone to solid–fluid interactions and thus more sensitive to the methods, procedures and techniques used to measure permeability. To address this problem, it is desirable to collect, for a single material, measurements obtained by different methods and pore fluids. For that purpose, a benchmarking exercise involving 24 laboratories was organized for measuring and modelling the permeability of a single low-permeability material, the Grimsel granodiorite. The objectives of the benchmark were: (i) to compare the results for a given method, (ii) to compare the results between different methods, (iii) to analyse the accuracy of each method, (iv) to study the influence of experimental conditions (especially the nature of pore fluid), (v) to discuss the relevance of indirect methods and models and finally (vi) to suggest good practice for low-permeability measurements. To complement the data set of permeability measurements presented in a companion paper, we focus here on (i) quantitative analysis of microstructures and pore size distribution, (ii) permeability modelling and (iii) complementary measurements of permeability anisotropy and poroelastic parameters. Broad ion beam—scanning electron microscopy, micro-computerized tomography, mercury injection capillary pressure (MICP) and nuclear magnetic resonance (NMR) methods were used to characterize the microstructures and provided the input parameters for permeability modelling. Several models were used: (i) basic statistical models, (ii) 3-D pore network and effective medium models, (iii) percolation model using MICP data and (iv) free-fluid model using NMR data. The models were generally successful in predicting the actual range of measured permeability. Statistical models overestimate the permeability because they do not adequately account for the heterogeneity of the crack network. Pore network and effective medium models provide additional constraints on crack parameters such as aspect ratio, aperture, density and connectivity. MICP and advanced microscopy techniques are very useful tools providing important input data for permeability estimation. Permeability measured—orthogonal to foliation is lower that—parallel to foliation. Combining the experimental and modelling results provide a unique and rich data set.

Geophysical Journal International↗

USGS2007

Observations of magnetite dissolution in poorly drained soils

Dissolution of strongly magnetic minerals is a common and relatively rapid phenomenon in poorly drained soils of the central United States, resulting in low magnetic susceptibility (MS). Low Eh reducing conditions are primarily responsible for magnetic mineral dissolution; a process likely mediated by iron-reducing bacteria in the presence of soil organic matter. Based on transects across drainage sequences from nine sites, natural magnetic minerals (>5 ??m) extracted from surface soil consist of 54% ?? 18% magnetite, 21% ?? 11% titanomagnetite, and 17% ?? 14% ilmenite. Magnetite and titanomagnetite dissolution, assessed by scanning electron microscopy on a 0-to-3 scale, inversely correlates with surface soil MS (r = 0.53), a proxy for soil drainage at studied transects. Altered magnetite typically displays etch pits <1-??m diameter, whereas titanomagnetite exhibits a latticework pattern of alteration along planes of crystallographic weakness (<1-??m spacing). Ilmenite, containing solely ferrous iron, is unaffected by reducing conditions, portraying mainly smooth-textured grains. Magnetic fractions (>5 ??m) include 26% ?? 18% anthropogenic fly ash that also exhibits greater dissolution in low MS soils (r = 0.38), indicating detectable alteration can occur within 150 years in low Eh soils. Laboratory induced reduction of magnetite, titanomagnetite, and magnetic fly ash, with a citrate-bicarbonate- dithionite solution, resulted in dissolution textures similar to those of in situ soil particles. Although experiments indicate that reductive dissolution of magnetite can occur abiotically under extreme conditions, bacteria likely play an important role in the natural environment. ?? 2007 Lippincott Williams & Wilkins, Inc.

Soil Science↗

USGS2010

The onset of metamorphism in ordinary and carbonaceous chondrites

Ordinary and carbonaceous chondrites of the lowest petrologic types were surveyed by X-ray mapping techniques. A variety of metamorphic effects were noted and subjected to detailed analysis using electron microprobe, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and cathodoluminescence (CL) methods. The distribution of Cr in FeO-rich olivine systematically changes as metamorphism increases between type 3.0 and type 3.2. Igneous zoning patterns are replaced by complex ones and Cr-rich coatings develop on all grains. Cr distributions in olivine are controlled by the exsolution of a Cr-rich phase, probably chromite. Cr in olivine may have been partly present as tetrahedrally coordinated Cr 3+ . Separation of chromite is nearly complete by petrologic type 3.2. The abundance of chondrules showing an inhomogeneous distribution of alkalis in mesostasis also increases with petrologic type. TEM shows this to be the result of crystallization of albite. Residual glass compositions systematically change during metamorphism, becoming increasingly rich in K. Glass in type I chondrules also gains alkalis during metamorphism. Both types of chondrules were open to an exchange of alkalis with opaque matrix and other chondrules. The matrix in the least metamorphosed chondrites is rich in S and Na. The S is lost from the matrix at the earliest stages of metamorphism due to coalescence of minute grains. Progressive heating also results in the loss of sulfides from chondrule rims and increases sulfide abundances in coarse matrix assemblages as well as inside chondrules. Alkalis initially leave the matrix and enter chondrules during early metamorphism. Feldspar subsequently nucleates in the matrix and Na re-enters from chondrules. These metamorphic trends can be used to refine classification schemes for chondrites. Cr distributions in olivine are a highly effective tool for assigning petrologic types to the most primitive meteorites and can be used to subdivide types 3.0 and 3.1 into types 3.00 through 3.15. On this basis, the most primitive ordinary chondrite known is Semarkona, although even this meteorite has experienced a small amount of metamorphism. Allan Hills (ALH) A77307 is the least metamorphosed CO chondrite and shares many properties with the ungrouped carbonaceous chondrite Acfer 094. Analytical problems are significant for glasses in type II chondrules, as Na is easily lost during microprobe analysis. As a result, existing schemes for chondrule classification that are based on the alkali content of glasses need to be revised.

Meteoritics and Planetary Science↗

USGS2014

Anatomy of the lamprey ear: morphological evidence for occurrence of horizontal semicircular ducts in the labyrinth of Petromyzon marinus

In jawed (gnathostome) vertebrates, the inner ears have three semicircular canals arranged orthogonally in the three Cartesian planes: one horizontal (lateral) and two vertical canals. They function as detectors for angular acceleration in their respective planes. Living jawless craniates, cyclostomes (hagfish and lamprey) and their fossil records seemingly lack a lateral horizontal canal. The jawless vertebrate hagfish inner ear is described as a torus or doughnut, having one vertical canal, and the jawless vertebrate lamprey having two. These observations on the anatomy of the cyclostome (jawless vertebrate) inner ear have been unchallenged for over a century, and the question of how these jawless vertebrates perceive angular acceleration in the yaw (horizontal) planes has remained open. To provide an answer to this open question we reevaluated the anatomy of the inner ear in the lamprey, using stereoscopic dissection and scanning electron microscopy. The present study reveals a novel observation: the lamprey has two horizontal semicircular ducts in each labyrinth. Furthermore, the horizontal ducts in the lamprey, in contrast to those of jawed vertebrates, are located on the medial surface in the labyrinth rather than on the lateral surface. Our data on the lamprey horizontal duct suggest that the appearance of the horizontal canal characteristic of gnathostomes (lateral) and lampreys (medial) are mutually exclusive and indicate a parallel evolution of both systems, one in cyclostomes and one in gnathostome ancestors.

Journal of Anatomy↗

USGS2006

Grain size-sensitive creep in ice II

Rheological experiments on fine-grained water ice II at low strain rates reveal a creep mechanism that dominates at conditions of low stress. Using cryogenic scanning electron microscopy, we observed that a change in stress exponent from 5 to 2.5 correlates strongly with a decrease in grain size from about 40 to 6 micrometers. The grain size-sensitive creep of ice II demonstrated here plausibly dominates plastic strain at the low-stress conditions in the interior of medium- to large-sized icy moons of the outer solar system.

Science↗

USGS2011

Pore networks in continental and marine mudstones: Characteristics and controls on sealing behavior

Mudstone pore networks are strong modifiers of sedimentary basin fluid dynamics and have a critical role in the distribution of hydrocarbons and containment of injected fluids. Using core samples from continental and marine mudstones, we investigate properties of pore types and networks from a variety of geologic environments, together with estimates of capillary breakthrough pressures by mercury intrusion porosimetry. Analysis and interpretation of quantitative and qualitative three-dimensional (3D) observations, obtained by dual focused ion beam–scanning electron microscopy, suggest seven dominant mudstone pore types distinguished by geometry and connectivity. A dominant planar pore type occurs in all investigated mudstones and generally has high coordination numbers (i.e., number of neighboring connected pores). Connected networks of pores of this type contribute to high mercury capillary pressures due to small pore throats at the junctions of connected pores and likely control most matrix transport in these mudstones. Other pore types are related to authigenic (e.g., replacement or pore-lining precipitation) clay minerals and pyrite nodules; pores in clay packets adjacent to larger, more competent clastic grains; pores in organic phases; and stylolitic and microfracture-related pores. Pores within regions of authigenic clay minerals often form small isolated networks (<3 μm). Pores in stringers of organic phases occur as tubular pores or slit- and/or sheet-like pores. These form short, connected lengths in 3D reconstructions, but appear to form networks no larger than a few microns in size. Sealing efficiency of the studied mudstones increases with greater distal depositional environments and greater maximum depth of burial.

Geosphere↗

USGS2001

Sperm-cell ultrastructure of North American sturgeons. IV. The pallid sturgeon (Scaphirhynchus albus Forbes and Richardson, 1905)

Sperm-cell morphology and ultrastructure in the pallid sturgeon (Scaphirhynchus albus) were examined using transmission and scanning electron microscopy. Metrics and structure were compared with similar metrics obtained from other published descriptions of sturgeon sperm cells. General morphology was found to be similar to that of sperm cells of the white (Acipenser transmontanus), lake (A. fulvescens), stellate (A. stellatus), Chinese (A. sinensis), Russian (A. gueldenstaedti colchicus), and shortnose (A. brevirostrum) sturgeons, which all shared a gradual tapering of the nuclear diameter from posterior to anterior, unlike that of the Atlantic sturgeon (A. oxyrhynchus). The sperm cell of the pallid sturgeon was similar in size to that of the Atlantic sturgeon, being only slightly larger. The sperm cell of the pallid sturgeon differed from those of other sturgeons chiefly in the acrosomal region, where the posterolateral projections (PLP) have the shape of an acute triangle and are arranged in a spiral about the longitudinal axis of the cell. The PLP were longer than those of other sturgeons, being twice the length of those of the Atlantic sturgeon and 58% longer than those of the lake sturgeon. Also, in cross section the acrosome had the shape of a hollow cone rather than the cap of an oak tree acorn, as was found in ultrastructural studies of other sturgeons. In addition, we were able to confirm that the structural arrangement of the distal centriole of the midpiece is identical with that of the proximal centriole: nine sets of microtubular triplets around the periphery of the centriole. This information is of potential use to fishery biologists, forensic biologists, zoologists, reproductive physiologists, taxonomists, evolutionary biologists, and aquaculturists.

Canadian Journal of Zoology↗

USGS2025

Evaluating sediment transport and metal sorption in the San Juan River watershed

The physical and chemical characteristics of sediment influence the transport of metals in rivers. The San Juan River and its tributaries are located in the Four Corners Region in the southwestern United States and the watershed contains a wide variety of potential metal sources. Comparisons of past and present sediment data provide insight into the effects of seasonality and storm events on the transport of sediment within a watershed. Comparisons suggest finer (<0.63 µm) sediment particles increase at a greater rate during intense storm events than coarser sediment particles. These fine, clay-sized sediments have a greater potential for metal sorption. Statistical analyses compared upper and lower portions of the San Juan River. Results show that total elemental concentration decreases in sediments (1785.15 μ g l −1 ) and that concentrations increase in the aqueous phase (2063.08 μ g l −1 ) downstream in the San Juan River. Analyses using geochemical and scanning electron microscopy with energy dispersive spectroscopy suggest that sediment clay particles are the most likely constituent to transport metals in the San Juan River. Metal transport is further aided by metal oxide coatings that develop on the surfaces of larger particles. Increases in aggregation of fine-grained particles in the downstream portions of the San Juan River are also likely to bind elements within sediments, which can act as both a source and sink for metals in the lower watershed. CEC , geochemistry , PSD

Arizona, Colorado, New Mexico, Utah↗

USGS2017

The application of microtextural and heavy mineral analysis to discriminate between storm and tsunami deposits

Recent work has applied microtextural and heavy mineral analyses to sandy storm and tsunami deposits from Portugal, Scotland, Indonesia and the USA. We looked at the interpretation of microtextural imagery (scanning electron microscopy) of quartz grains and heavy mineral compositions. We consider inundation events of different chronologies and sources (the AD 1755 Lisbon and 2004 Indian Ocean tsunamis, the Great Storm of 11 January 2005 in Scotland, and Hurricane Sandy in 2012) that affected contrasting coastal and hinterland settings with different regional oceanographic conditions. Storm and tsunami deposits were examined along with potential source sediments (alluvial, beach, dune and nearshore sediments) to determine provenance. Results suggest that tsunami deposits typically exhibit a significant spatial variation in grain sizes, microtextures and heavy minerals. Storm deposits show less variability, especially in vertical profiles. Tsunami and storm quartz grains had more percussion marks and fresh surfaces compared to potential source material. Moreover, in the studied cases, tsunami samples had fewer fresh surfaces than storm deposits. Heavy mineral assemblages are typically site-specific. The concentration of heavy minerals decreases upwards in tsunamigenic units, whereas storm sediments show cyclic concentrations of heavy minerals, reflected in the laminations observed macroscopically in the deposits.

Geological Society, London, Special Publications↗

USGS1995

Evidence from tooth surface morphology for a posterior maxillary origin of the proteroglyph fang

Although the front-fanged venom delivery system of the Elapidae is believed to be derived from an aglyphous or opisthoglyphous colubroid ancestor, opinion is divided as to the end of the maxilla on which the proteroglyph fang originated. This study was undertaken to determine whether the evolutionary precursor of the proteroglyph fang was (a) a grooved posterior fang which migrated anteriorly, or (b) an enlarged anterior tooth which secondarily developed a groove for the conduction of venom. The surface morphology of the maxillary teeth of colubrid genera was examined using scanning electron microscopy. Ridges present on the lingual and labial surfaces of anterior maxillary teeth and on the anterior and posterior surfaces of posterior maxillary teeth were identified as morphological markers of potential value in distinguishing the anterior and posterior maxillary teeth of colubrid snakes, and in determining the origin of the proteroglyph fang. Patterns of ridges on the surfaces of elapid fangs examined were found to be consistent with the hypothesis that the evolutionary precursor of the proteroglyph fang was an opisthoglyph fang which migrated anteriorly.

Amphibia-Reptilia↗

USGS2013

Three new Psammothidium species from lakes of Olympic and Cascade Mountains in Washington State, USA

Populations of several Psammothidium species were found in core sediments from nine remote, high elevation, ultraoligotrophic and oligotrophic, Olympic and Cascade Mountain lakes. Three of these species, P. lacustre, P. alpinum , and P. nivale , are described here as new. The morphology of the silica frustules of these species was documented using light and scanning electron microscopy. We discuss the similarities and differences with previously described Psammothidium species.

Washington↗

USGS2017

Controls on pore types and pore-size distribution in the Upper Triassic Yanchang Formation, Ordos Basin, China: Implications for pore-evolution models of lacustrine mudrocks

Our main objectives are to (1) learn if pore-evolution models developed from marine mudrocks can be directly applied to lacustrine mudrocks, (2) investigate what controls the different pore types and sizes of Chang 7 organic matter (OM)-rich argillaceous mudstones of the Upper Triassic Yanchang Formation, and (3) describe the texture, fabric, mineralogy, and thermal maturity variation in the Chang 7 mudstones. Lacustrine mudstones from nine cored wells along a depositional dip in the southeastern Ordos Basin, China, were investigated. Helium porosimetry, nitrogen adsorption, and field-emission scanning electron microscopy of Ar-ion milled samples were applied. Measured average total porosity of samples from a proximal to distal transect ( ϕ = 5.0 % "> ϕ = 5.0 % ) is higher than those from the two adjacent cored wells ( ϕ = 2.3 % "> ϕ = 2.3 % ). This difference in porosity partly caused by differences in the clay mineral content implies that in the fluvial-deltaic-lacustrine depositional environment, reservoir quality can vary significantly in a short distance. Owing to the uneven distribution of the sample set from proximal to distal area, we mainly evaluate variations in the proximal setting. Results from nitrogen-gas adsorption experiments show that there are four distinct patterns of pore-size distribution within the Chang 7 member of the Yanchang Formation with no particular correlation with mineralogical composition and thermal maturity. The pore network within Chang 7 mudstones is dominated by OM-hosted pores, with a lesser abundance of interparticle and intraparticle pores. The size distribution of mineral-hosted pores within these mudstones is found to be closely related to the rock texture (sorting and grain size) and fabric. Mudstones with well-sorted grains and a higher percentage of coarser grains have more abundant mineral pores. The sizes of OM-hosted pores in these compaction-dominated lacustrine mudstones were one to two orders of magnitude smaller than those in the marine mudstones that display abundant early cementation.

Ordos basin↗

USGS1987

Fabric and its relation to sedimentologic and physical properties of near-surface sediment, Shelikof Strait and Alsek prodelta, Alaska

To investigate the possible relation between the fabric (microstructural arrangement of particles) of a fine-grained sedimentary deposit and the depositional and environmental processes of that deposit, the fabric of sediment samples from the sea floor of two different depositional settings, Shelikof Strait and the Alsek prodelta, Alaska, were studied by using scanning electron microscopy (SEM). Sediment of both areas is texturally similar, consisting of a muddy sand that grades to a mud with increasing water depth. Mineralogically, both areas are characterized by a clay-size fraction dominated by illite, chlorite, and rock flour. The dominant fabric of undisturbed sediment from both study areas consists of a sand- and coarse-silt-size agranular fraction surrounded by an open matrix of clay- and fine-silt-size platelets arranged in a combination of randomly oriented flocs and many single grain contacts. The similarity of the fabric of sediment from the two study areas suggests that the fabric is not controlled by the different depositional settings but rather by the dominant clay mineralogy and sediment texture. The most noticeable alteration of the original fabric of Shelikof Strait and Alsek prodelta sediment occurs as a result of high levels of consolidation and the shearing process.

Journal of Sedimentary Petrology↗