SEARCH · Search USGS

Results for “Offshore”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS2020

Gut contents from multiple morphs of lake trout (Salvelinus namaycush) at two offshore shoals in Lake Superior

Four lake trout, Salvelinus namaycush , Walbaum 1792 morphs occur in Lake Superior: lean, siscowet, humper, and redfin. Diets of lean and siscowet have been relatively well described. However, less is known about diets of humper and redfin, and overall few studies have been conducted at offshore shoals. We compared gut content data among mature (357–867 mm) sympatric lake trout morphs caught at two offshore shoals in Lake Superior, Stannard Rock and Superior Shoal, in 2013 and 2014 (total n = 416). All morphs were caught in shallow (<50 m), mid (50–100 m), and deep (>100 m) strata. Invertebrates made up a greater portion of the stomach contents than did fish for all morphs by both percent occurrence and proportional biomass, and Mysis was the primary invertebrate consumed by all morphs at both sites. Coregonus spp. and deepwater sculpin, Myoxocephalus thompsonii were the most commonly consumed fish. Humper had the highest average proportional biomass of deepwater sculpin and had no other identifiable species of fish in their guts. Biomass of fish in redfin guts was highest for Coregonus spp., followed by similar amounts of deepwater sculpin and burbot, Lota lota . Diet overlap among morphs was high, and differences in prey consumption between sites are likely related to prey availability. Additional study is needed to determine if differences in trophic ecology between humper and other morphs are sufficient to support concurrent stocking of multiple morphs, particularly in light of recent declines in native prey fishes, especially Coregonus spp., in the Laurentian Great Lakes.

Lake Superior↗

USGS2014

Modification of the Quaternary stratigraphic framework of the inner-continental shelf by Holocene marine transgression: An example offshore of Fire Island, New York

The inner-continental shelf off Fire Island, New York was mapped in 2011 using interferometric sonar and high-resolution chirp seismic-reflection systems. The area mapped is approximately 50 km long by 8 km wide, extending from Moriches Inlet to Fire Island Inlet in water depths ranging from 8 to 32 m. The morphology of this inner-continental shelf region and modern sediment distribution patterns are determined by erosion of Pleistocene glaciofluvial sediments during the ongoing Holocene marine transgression; much of the shelf is thus an actively forming ravinement surface. Remnants of a Pleistocene outwash lobe define a submerged headland offshore of central Fire Island. East of the submerged headland, relatively older Pleistocene outwash is exposed over much of the inner-continental shelf and covered by asymmetric, sorted bedforms interpreted to indicate erosion and westward transport of reworked sediment. Erosion of the eastern flank of the submerged Pleistocene headland over the last ~ 8000 years yielded an abundance of modern sand that was transported westward and reworked into a field of shoreface-attached ridges offshore of western Fire Island. West of the submerged headland, erosion of Pleistocene outwash continues in troughs between the sand ridges, resulting in modification of the lower shoreface. Comparison of the modern sand ridge morphology with the morphology of the underlying ravinement surface suggests that the sand ridges have moved a minimum of ~ 1000 m westward since formation. Comparison of modern sediment thickness mapped in 1996–1997 and 2011 allows speculation that the nearshore/shoreface sedimentary deposit has gained sediment at the expense of deflation of the sand ridges.

New York↗

USGS2016

Accommodation space in a high-wave-energy inner-shelf during the Holocene marine transgression: Correlation of onshore and offshore inner-shelf deposits (0–12 ka) in the Columbia River littoral cell system, Washington and Oregon, USA

The Columbia River Littoral Cell (CRLC), a high-wave-energy littoral system, extends 160 km alongshore, generally north of the large Columbia River, and 10–15 km in across-shelf distance from paleo-beach backshores to about 50 m present water depths. Onshore drill holes (19 in number and 5–35 m in subsurface depth) and offshore vibracores (33 in number and 1–5 m in subsurface depth) constrain inner-shelf sand grain sizes (sample means 0.13–0.25 mm) and heavy mineral source indicators (> 90% Holocene Columbia River sand) of the inner-shelf facies (≥ 90% fine sand). Stratigraphic correlation of the transgressive ravinement surface in onshore drill holes and in offshore seismic reflection profiles provide age constraints (0–12 ka) on post-ravinement inner-shelf deposits, using paleo-sea level curves and radiocarbon dates. Post-ravinement deposit thickness (1–50 m) and long-term sedimentation rates (0.4–4.4 m ka − 1 ) are positively correlated to the cross-shelf gradients (0.36–0.63%) of the transgressive ravinement surface. The total post-ravinement fill volume of fine littoral sand (2.48 × 10 10 m 3 ) in the inner-shelf represents about 2.07 × 10 6 m 3 year − 1 fine sand accumulation rate during the last 12 ka, or about one third of the estimated middle- to late-Holocene Columbia River bedload or sand discharge (5–6 × 10 6 m 3 year − 1 ) to the littoral zone. The fine sand accumulation in the inner-shelf represents post-ravinement accommodation space resulting from 1) geometry and depth of the transgressive ravinement surface, 2) post-ravinement sea-level rise, and 3) fine sand dispersal in the inner-shelf by combined high-wave-energy and geostrophic flow/down-welling drift currents during major winter storms.

Oregon, Washington↗

USGS2016

Shallower structure and geomorphology of the southern Puerto Rico offshore margin

Oblique convergence between the North American and Caribbean plates along the eastern Greater Antilles island arc has yielded the compressive Muertos margin in the backarc region. The Muertos margin is characterized by an asymmetric thrust belt with overall opposite vergence to the subduction system in the forearc region. Offshore south of Puerto Rico, this thrust belt disappears and is replaced by a succession of NE─SW- and E─W-trending deep basins and steep ridges that characterize the western Anegada passage, resulting in a complex deformation pattern. Using new high-resolution multibeam bathymetry and a dense data set of mostly new seismic reflection profiles, we studied the along- and across-strike variations of the geomorphology and shallower structure of the southern Puerto Rico offshore margin. We have identified four morphotectonic provinces: the Puerto Rican sub-basin and Muertos trough, the Muertos margin, the insular shelf and the western Anegada passage. The Muertos margin province shows two distinct slope sub-provinces: the active Muertos thrust belt formed by N─S-compression between the island arc and the Caribbean plate’s interior ─which includes lower and upper thrust belts with distinct deformational styles and lateral continuity─ and the shelf slope covered by a thick package of layered sediments highly-incised by a dense canyon network. This network is disrupted by the Investigator fault zone consisting of a 130 km-long E─W-trending band of active extensional deformation. The Investigator fault zone shows differential surface expression caused by along-strike changes in the magnitude and distribution of the deformation, though this deformation is driven by a N─S-oriented extension, and if there is any amount of strike-slip it is insignificant. In the western Anegada passage province, the Whiting basin and Whiting and Grappler ridges are formed by large dipslip normal faults driven by a NW─SE-oriented extensional regime. The western St. Croix rise shows a complex structure as attested by the existence of NE─SW- and E─W-oriented normal faults. The NE─SW-trending NW-dipping normal faults observed at the summit of the rise predate the E─W-bounding faults that could accommodate the extensional deformation at the Present. This study provides detailed observations on the active tectonic and sedimentary processes to help future studies assessing the natural resources and the seismic and tsunamigenic hazard in the Puerto Rico region.

Marine and Petroleum Geology↗

USGS2004

Ecological and political issues surrounding decommissioning of offshore oil facilities in the Southern California Bight

To aid legislators, resource managers, and the general public, this paper summarizes and clarifies some of the issues and options that the federal government and the state of California face in decommissioning offshore oil and gas production platforms, particularly as these relate to platform ecology. Both local marine ecology and political climate play a role in decommissioning offshore oil production platforms. Compared to the relatively supportive political climate in the Gulf of Mexico for “rigs-to-reefs” programs, conflicting social values among stakeholders in Southern California increases the need for understanding ecological impacts of various decommissioning alternatives (which range from total removal to allowing some or all of platform structure to remain in the ocean). Additional scientific needs in the decommissioning process include further assessment of platform habitat quality, estimation of regional impacts of decommissioning alternatives to marine populations, and determination of biological effects of any residual contaminants. The principal management need is a ranking of environmental priorities (e.g. species-of-interest and marine habitats). Because considerable numbers of economically important species reside near oil platforms, National Oceanic and Atmospheric Administration Fisheries should consider the consequences of decommissioning alternatives in their overall management plans. Management strategies could include designating reefed platforms as marine protected areas. The overarching conclusion from both ecological and political perspectives is that decommissioning decisions should be made on a case-by-case basis.

Ocean and Coastal Management↗

USGS2019

Offshore landslide hazard curves from mapped landslide size distributions

We present a method to calculate landslide hazard curves along offshore margins based on size distributions of submarine landslides. The method analyzes ten different continental margins, that were mapped by high-resolution multibeam sonar with landslide scar areas measured by a consistent GIS procedure. Statistical tests of several different probability distribution models indicate that the lognormal model is most appropriate for these siliciclastic environments, consistent with an earlier study of the U.S. Atlantic margin [Chaytor et al., 2009]. Parameter estimation is performed using the maximum likelihood technique and confidence intervals are determined using likelihood profiles. Pairwise comparison of size distributions for the ten margins indicates that the U.S. Atlantic and Queen Charlotte margins are different than most other margins. These margins represent end members, with the U.S. Atlantic margin having the highest mean scar area and the Queen Charlotte margin, the lowest. We demonstrate that empirical, offshore landslide hazard curves can be developed from the landslide size distributions, if the duration of mapped landslide activity is known. This study indicates that the shape parameter of the size distribution is similar among all ten margins and thus the shape of the hazard curves is also similar. Significant differences in hazard curves among the margins are therefore related to differences in mean sizes and, potentially, differences in the duration of landslide activity.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

An ocean bottom seismometer study of shallow seismicity near the Mid- America Trench offshore Guatemala

Five ocean bottom seismometers recorded seismicity near the Mid-America Trench offshore Guatemala for 27 days in 1979. The array was emplaced in the lower slope region, just above the topographic trench, in the area investigated during Deep Sea Drilling Project legs 67 and 84. Approximately 170 events were recorded by three or more seismometers, and almost half were located with statistical hypocentral errors of less than 10 km. Most epicenters were located immediately landward of the trench axis, and many were further confined to a zone northwest of the array. In terms of depth, most events were located within the subducting Cocos plate rather than in the overlying plate or at the plate-plate boundary. Their apparent concentration in the lower crust and upper mantle may suggest that the upper crust does not have the strength to support earthquake-generating stresses. The data permit construction of a magnitude-duration scale, calibrated with m b magnitudes for events located by the World-Wide Standard Seismograph Network (WWSSN) and recorded by our array and by the network recording foreshocks and aftershocks of the 1979 Petatlan earthquake. Most magnitudes ranged between 3.0 and 4.0 m b , and the threshold magnitude of locatable events was about 2.8 m b . Two distinct composite focal mechanisms were determined. One appears to indicate high-angle reverse faulting in the subducting plate, in a plane parallel to trench axis strike. The other, constructed for some earthquakes in the zone northwest of the array, seems to show normal faulting along possible fault planes oriented quasi-perpendicular to the trench axis. The normal faulting is consistent with the segmentation of the Cocos plate that has been proposed from land evidence. Such segmentation might be evidenced offshore by normal faulting along planes subperpendicular to trench strike. Alternatively, the seismicity zone and associated normal faulting mechanism may be the subsurface expression of the tectonics responsible for the San Jose Canyon, a prominent submarine canyon located farther upslope. Finally, projection of our seismicity sample and of well-located WWSSN events from 1954 to 1980 onto a plane perpendicular to the trench axis shows a distinct gap between the shallow seismicity located by our array, and the deeper Wadati-Benioff zone seismicity located by the WWSSN. We tentatively ascribe this gap to inadequate sampling, but we suggest that it requires further investigation.

Journal of Geophysical Research Solid Earth↗

USGS1986

Regional method to assess offshore slope stability.

The slope stability of some offshore environments can be evaluated by using only conventional acoustic profiling and short-core sampling, followed by laboratory consolidation and strength testing. The test results are synthesized by using normalized-parameter techniques. The normalized data are then used to calculate the critical earthquake acceleration factors or the wave heights needed to initiate failure. These process-related parameters provide a quantitative measure of the relative stability for locations from which short cores were obtained. The method is most applicable to offshore environments of gentle relief and simple subsurface structure and is not considered a substitute for subsequent site-specific analysis. -from ASCE Publications Information

Journal of Geotechnical Engineering↗

USGS2012

Habitat use by fishes of Lake Superior. I. Diel patterns of habitat use in nearshore and offshore waters of the Apostle Islands region

Diel patterns of distribution of fishes in nearshore (15–80 m depth) and offshore (>80 m) waters of the Apostle Islands region of Lake Superior were described using bottom trawls, mid-water trawls, and acoustic gear during day and night sampling. These data revealed three types of diel migration: diel vertical migration (DVM), diel bank migration (DBM), and no migration. DVM was expressed by fishes migrating from benthopelagic to pelagic strata and DBM was expressed by fishes migrating horizontally from deeper waters in the day to shallower waters at night while remaining within the benthopelagic stratum. Most fishes that did not exhibit diel migration showed increased nighttime densities as a result of increased activity and movement from benthic to benthopelagic strata. Rainbow Smelt ( Osmerus mordax), Cisco ( Coregonus artedi ), Bloater ( C. hoyi ), Kiyi ( C. kiyi ), juvenile Trout-Perch (Percopsis omiscomaycus ), and adult siscowet ( Salvelinus namaycush siscowet ) exhibited DVM. Lake Whitefish ( C. clupeaformis ), lean Lake Trout ( Salvelinus namaycush namaycush ), and juvenile siscowet exhibited DBM. Adult Trout-Perch and adult Pygmy Whitefish ( Prosopium coulteri ) exhibited a mixture of DBM and DVM. Burbot ( Lota lota ), Slimy Sculpin ( Cottus cognatus ), Spoonhead Sculpin ( C. ricei ), and Deepwater Sculpin ( Myoxocephalus thompsonii ) did not exhibit diel migration, but showed evidence of increased nocturnal activity. Ninespine Stickleback ( Pungitius pungitius ) exhibited a mixture of DVM and non-migration. Juvenile Pygmy Whitefish did not show a diel change in density or depth distribution. Species showing ontogenetic shifts in depth distribution with larger, adult life stages occupying deeper waters included, Rainbow Smelt, lean and siscowet Lake Trout, Lake Whitefish, Pygmy Whitefish, Ninespine Stickleback and Trout-Perch. Of these species, siscowet also showed an ontogenetic shift from primarily DBM as juveniles to primarily DVM as adults. Across all depths, fishes expressing DVM accounted for 73% of the total estimated community areal biomass (kg ha −1 ) while those expressing DBM accounted for 25% and non-migratory species represented 2% of the biomass. The proportion of total community biomass exhibiting DVM increased with depth, from 59% to 95% across ≤30 m to >90 m depth zones. Along the same depth gradient, the proportion of total community biomass exhibiting DBM declined from 40% to 1%, while non-migrators increased from 1% to 4%. These results indicate that DVM and DBM behaviors are pervasive in the Lake Superior fish community and potentially provide strong linkages that effect coupling of benthic and pelagic and nearshore and offshore habitats.

Aquatic Ecosystem Health & Management↗

USGS2012

Observations of ocean circulation and sediment transport experiment offshore of Fire Island, NY

Researchers from the U.S. Geological Survey (USGS) Woods Hole Coastal and Marine Science Center (WHCMSC), in collaboration with Coastal Carolina University (CCU) and University of South Carolina (USC), conducted a scientific field study to investigate the ocean circulation and sediment transport processes offshore of Fire Island, NY. Although the physical processes along the entire linear extent of Fire Island (~50 km) are of interest to the project, one particular region of focus is at the western end of the island where offshore sand ridges out to depths of 20 m extend across the inner shelf and connect to the near-shore bar system. The primary objective was to measure the physical processes around the sand ridges, including circulation patterns, wave parameters, bottom stress, and suspended sediment. Transects of instrumentation were positioned along and across the crests and troughs of the ridge field. A site at the top of a ridge and a site at the bottom of an adjacent trough were each populated with two tripods designed to provide high-resolution measurements near the sea-bed to record sediment re-suspension events. Measurements at these two sites include near bottom velocity profiles, acoustic Doppler velocimeters, pressure, optical transmission and backscatter at high sampling rates. Other measurements include upward looking velocity profiles, temperature, salinity, sonar images and profiles, and sediment size classes. Five smaller tripods were deployed to complete lines alongshore and across shore over a 5 km area to provide a regional picture. These tripods recorded upward looking velocity profiles and near bottom temperature, pressure and salinity. Surface buoys marked the position of the tripods and collected surface measurements at six of the sites. One buoy gathered meteorological measurements. The sites were occupied from January to April, 2012. This deployment was similar to previous efforts off Cape Hatteras, NC, in 2009, and is part of an ongoing effort to understand regional patterns in circulation and sediment transport and the interaction of inner shelf and near shore processes. New instrumentation for the USGS was introduced, including a variety of current and wave measurement equipment, acquisition and telemetry in near-realtime of the weather data, time series sonar imaging equipment, and anti-fouling wipers. Preliminary results suggest a complex and subtle relationship between wind and across shore current velocity in this region, and a more straightforward relationship between winds and alongshore currents. This paper also includes a preliminary report on the effectiveness of new measurement techniques used during this experiment.

New York↗

USGS2014

Habitat coupling in a large lake system: delivery of an energy subsidy by an offshore planktivore to the nearshore zone of Lake Superior

1. We hypothesised that the autumn spawning migration of Lake Superior cisco ( Coregonus artedi ) provides a resource subsidy, in the form of energy-rich cisco eggs, from the offshore pelagic to the nearshore benthic community over winter, when alternate prey production is likely to be low. 2. We tested this hypothesis using fish and macroinvertebrate surveys, fish population demographics, diet and stable isotope analyses, and bioenergetics modelling. 3. The benthic, congeneric lake whitefish ( C. clupeaformis ) was a clear beneficiary of cisco spawning. Cisco eggs represented 16% of lake whitefish annual consumption in terms of biomass, but 34% of energy (because of their high energy density: >10 kJ g wet mass −1 ). Stable isotope analyses were consistent with these results and suggest that other nearshore fish species may also rely on cisco eggs. 4. The lipid content of lake whitefish liver almost doubled from 26 to 49% between November and March, while that of muscle increased from 14 to 26% over the same period, suggesting lake whitefish were building, rather than depleting, lipid reserves during winter. 5. In the other Laurentian Great Lakes, where cisco populations remain very low and rehabilitation efforts are underway, the offshore-to-nearshore ecological link apparent in Lake Superior has been replaced by non-native planktivorous species. These non-native species spawn in spring have smaller eggs and shorter incubation periods. The rehabilitation of cisco in these systems should reinstate the onshore subsidy as it has in Lake Superior.

Wisconsin↗

USGS2008

Diagnosis of an intense atmospheric river impacting the pacific northwest: Storm summary and offshore vertical structure observed with COSMIC satellite retrievals

This study uses the new satellite-based Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) mission to retrieve tropospheric profiles of temperature and moisture over the data-sparse eastern Pacific Ocean. The COSMIC retrievals, which employ a global positioning system radio occultation technique combined with "first-guess" information from numerical weather prediction model analyses, are evaluated through the diagnosis of an intense atmospheric river (AR; i.e., a narrow plume of strong water vapor flux) that devastated the Pacific Northwest with flooding rains in early November 2006. A detailed analysis of this AR is presented first using conventional datasets and highlights the fact that ARs are critical contributors to West Coast extreme precipitation and flooding events. Then, the COSMIC evaluation is provided. Offshore composite COSMIC soundings north of, within, and south of this AR exhibited vertical structures that are meteorologically consistent with satellite imagery and global reanalysis fields of this case and with earlier composite dropsonde results from other landfalling ARs. Also, a curtain of 12 offshore COSMIC soundings through the AR yielded cross-sectional thermodynamic and moisture structures that were similarly consistent, including details comparable to earlier aircraft-based dropsonde analyses. The results show that the new COSMIC retrievals, which are global (currently yielding ???2000 soundings per day), provide high-resolution vertical-profile information beyond that found in the numerical model first-guess fields and can help monitor key lower-tropospheric mesoscale phenomena in data-sparse regions. Hence, COSMIC will likely support a wide array of applications, from physical process studies to data assimilation, numerical weather prediction, and climate research. ?? 2008 American Meteorological Society.

Monthly Weather Review↗

USGS2016

Seismic attribute detection of faults and fluid pathways within an active strike-slip shear zone: New insights from high-resolution 3D P-Cable™ seismic data along the Hosgri Fault, offshore California

Poststack data conditioning and neural-network seismic attribute workflows are used to detect and visualize faulting and fluid migration pathways within a 13.7 km 2 13.7 km 2 3D P-Cable™ seismic volume located along the Hosgri Fault Zone offshore central California. The high-resolution 3D volume used in this study was collected in 2012 as part of Pacific Gas and Electric’s Central California Seismic Imaging Project. Three-dimensional seismic reflection data were acquired using a triple-plate boomer source (1.75 kJ) and a short-offset, 14-streamer, P-Cable system. The high-resolution seismic data were processed into a prestack time-migrated 3D volume and publicly released in 2014. Postprocessing, we employed dip-steering (dip and azimuth) and structural filtering to enhance laterally continuous events and remove random noise and acquisition artifacts. In addition, the structural filtering was used to enhance laterally continuous edges, such as faults. Following data conditioning, neural-network based meta-attribute workflows were used to detect and visualize faults and probable fluid-migration pathways within the 3D seismic volume. The workflow used in this study clearly illustrates the utility of advanced attribute analysis applied to high-resolution 3D P-Cable data. For example, results from the fault attribute workflow reveal a network of splayed and convergent fault strands within an approximately 1.3 km wide shear zone that is characterized by distinctive sections of transpressional and transtensional dominance. Neural-network chimney attribute calculations indicate that fluids are concentrated along discrete faults in the transtensional zones, but appear to be more broadly distributed amongst fault bounded anticlines and structurally controlled traps in the transpressional zones. These results provide high-resolution, 3D constraints on the relationships between strike-slip fault mechanics, substrate deformation, and fluid migration along an active fault system offshore central California.

California↗

USGS1981

Thermogenic hydrocarbons in unconsolidated sediment of Eel river basin, offshore northern California

Thermally produced hydrocarbons were recovered from unconsolidated sediment ponded within a bathymetric depression on the surface of a shale diapir in the offshore Eel River Basin of northern California. Evidence that the hydrocarbons are thermogenic consists of the following: (1) very high concentrations of hydrocarbon gases, particularly ethane through butanes (C 2 -C 4 ); (2) methane having a carbon isotopic composition (relative to the PDB standard) of −43 and −44 per mil; (3) presence of gasoline-range (C 5+ ) hydrocarbons; and (4) presence of a complex mixture of heavy hydrocarbons (C 15+ ) with n-alkanes having a petroleumlike distribution. This mixture of gaseous and liquid hydrocarbons likely originated deep within the basin and migrated to the surface through fractures and faults developed during the emplacement of the diapir. The presence of thermogenic hydrocarbons in unconsolidated surface sediment indicates that conditions for petroleum generation have existed within this offshore basin.

California↗

USGS2019

Geochemically distinct oil families in the onshore and offshore Santa Maria basins, California

The purpose of this work is to identify genetic affinities among 48 crude oil samples from the onshore and offshore Santa Maria basins. A total of 21 source-related biomarker and stable carbon isotope ratios among the samples were assessed to assure that they were unaffected by secondary processes. Chemometric analysis of these data identifies six oil families with map and stratigraphic distributions that reflect organofacies variations within the Miocene Monterey Formation source rock. The data comprise a training set that was used to create a chemometric decision tree to classify newly collected oil samples. Three onshore families originated from two synclines, which may contain one or more pods of thermally mature source rock. Multiple biomarker parameters indicate that the six oil families achieved early oil window maturity in the range of 0.6%–0.7% equivalent vitrinite reflectance. The offshore oil samples consist of one family from Point Pedernales field and two families from the “B” prospect. Geochemical characteristics of these families indicate origins under differing water column and sediment oxicity and carbonate versus siliceous and detrital input in ‘carbonate,’ ‘marl,’ and ‘shale’ organofacies like those in the lower calcareous–siliceous, carbonaceous marl, and clayey–siliceous members of the Monterey Formation elsewhere in coastal California. The corresponding lithofacies and organofacies appear to be linked to the early–middle Miocene climate optimum and subsequent paleoclimatic cooling after circa 14 Ma, a systematic up-section increase in the stable carbon isotope composition of related oil samples, decreased preservation of calcium carbonate shells from planktic foraminifera and coccoliths, and increased preservation of clay-sized siliceous shells of diatoms and radiolarians. The results show that organofacies within the Monterey source rock are responsible for many of the geochemical differences between the oil families. This paleoclimate–organofacies model for crude oil from the Monterey Formation can be used to enhance future exploration efforts in many areas of coastal California.

California↗

USGS2014

Offset of latest pleistocene shoreface reveals slip rate on the Hosgri strike-slip fault, offshore central California

The Hosgri fault is the southern part of the regional Hosgri–San Gregorio dextral strike‐slip fault system, which extends primarily in the offshore for about 400 km in central California. Between Morro Bay and San Simeon, high‐resolution multibeam bathymetry reveals that the eastern strand of the Hosgri fault is crossed by an &sim;265  m wide slope interpreted as the shoreface of a latest Pleistocene sand spit. This sand spit crossed an embayment and connected a western fault‐bounded bedrock peninsula and an eastern bedrock highland, a paleogeography resembling modern coastal geomorphology along the San Andreas fault. Detailed analysis of the relict shoreface with slope profiles and slope maps indicates a lateral slip rate of 2.6±0.9  mm/yr, considered a minimum rate for the Hosgri given the presence of an active western strand. This slip rate indicates that the Hosgri system takes up the largest share of the strike‐slip fault budget and is the most active strike‐slip fault west of the San Andreas fault in central California. This result further demonstrates the value and potential of high‐resolution bathymetry in characterization of active offshore faults.

California↗

USGS2017

Alternative rupture-scaling relationships for subduction interface and other offshore environments

Alternative fault-rupture-scaling relationships are developed for Mw 7.1– 9.5 subduction interface earthquakes using a new database of consistently derived finitefault rupture models from teleseismic inversion. Scaling relationships are derived for rupture area, rupture length, rupture width, maximum slip, and average slip. These relationships apply width saturation for large-magnitude interface earthquakes (approximately Mw >8:6) for which the physical characteristics of subduction zones limit the depth extent of seismogenic rupture, and consequently, the down-dip limit of strong ground motion generation. On average, the down-dip rupture width for interface earthquakes saturates near 200 km (196 km on average). Accordingly, the reinterpretation of rupture-area scaling for subduction interface earthquakes through the use of a bilinear scaling model suggests that rupture asperity area is less well correlated with magnitude for earthquakes Mw >8:6. Consequently, the size of great-magnitude earthquakes appears to be more strongly controlled by the average slip across asperities. The sensitivity of the interface scaling relationships is evaluated against geographic region (or subduction zone) and average dip along the rupture interface to assess the need for correction factors. Although regional perturbations in fault-rupture scaling could be identified, statistical significance analyses suggest there is little rationale for implementing regional correction factors based on the limited number of interface rupture models available for each region. Fault-rupture-scaling relationships are also developed for intraslab (within the subducting slab), extensional outer-rise and offshore strike-slip environments. For these environments, the rupture width and area scaling properties yield smaller dimensions than interface ruptures for the corresponding magnitude. However, average and maximum slip metrics yield larger values than interface events. These observations reflect both the narrower fault widths and higher stress drops in these faulting environments. Although expressing significantly different rupture-scaling properties from earthquakes in subduction environments, the characteristics of offshore strike-slip earthquake ruptures compare similarly to commonly used rupture-scaling relationships for onshore strike-slip earthquakes.

Bulletin of the Seismological Society of America↗

USGS2019

Shallow structure and geomorphology along the offshore northern San Andreas Fault, Tomales Point to Fort Ross, California

We mapped a poorly documented 35-km-long section of the northern San Andreas fault zone (NSAF) between Tomales Point and Fort Ross, California. Mapping is largely based on high-resolution seismic-reflection profiles (38 fault crossings), multibeam bathymetry, and onshore geology. NSAF strike in this section is nearly parallel to plate motion, characterized by a slight (~2°) northerly (transtensional) bend in the south between Tomales Bay and the Bodega isthmus, and a northwesterly (transpressional) ~5° bend in the north between the Bodega isthmus and Fort Ross. The southern transtensional bend is the northern part of the now-submerged, linear, ~50-km-long and 1- to 2-km-wide, "Tomales-Bodega valley." The valley floor is cut by a complex zone of subparallel, variably continuous fault strands and the deformed valley fill is an inferred mix of late Quaternary marine and nonmarine strata. In the northern part of this elongate valley, Holocene fault offset occurred on two fault strands about 740 m apart. The northern transpressional bend is characterized by narrow, elongate, asymmetric basins containing as much as 56 m of inferred latest Pleistocene to Holocene sediment. Between Bodega Head and Fort Ross, the gently dipping (~0.8°) shelf includes two large (4.8 and 5.9 km2) zones of sediment failure that we speculatively correlate with the 1906 San Francisco NSAF earthquake. Similar sediment-failure zones should be common along offshore reaches of the NSAF and other nearshore fault zones, but have apparent limited preservation potential. Onland geomorphic impacts of the mainly offshore NSAF include: (1) Northward upwarping of uplifted marine terraces in the transpressional zone north of Bodega Bay; and (2) Blocking of littoral sediment transport by uplifts on the west flank of the NSAF at Bodega Head and Tomales Point, resulting in rapidly accreting beaches and large coastal sand dune complexes.

California↗