Search USGSSearch

SEARCH · Search USGS

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

Strain accumulation and rotation in the Eastern California Shear Zone

Although the Eastern California Shear Zone (ECSZ) (strike ∼N25°W) does not quite coincide with a small circle drawn about the Pacific-North America pole of rotation, trilateration and GPS measurements demonstrate that the motion within the zone corresponds to right-lateral simple shear across a vertical plane (strike N33°W±5°) roughly parallel to the tangent to that local small circle (strike ∼N40°W). If the simple shear is released by slip on faults subparallel to the shear zone, the accumulated rotation is also released, leaving no secular rotation. South of the Garlock fault the principal faults (e.g., Calico-Blackwater fault) strike ∼N40°W, close enough to the strike of the vertical plane across which maximum right-lateral shear accumulates to almost wholly accommodate that accumulation of both strain and rotation by right-lateral slip. North of the Garlock fault dip slip as well as strike slip on the principal faults (strike ∼N20°W) is required to accommodate the simple shear accumulation. In both cases the accumulated rotation is released with the shear strain. The Garlock fault, which transects the ECSZ, is not offset by north-northwest striking faults nor, despite geological evidence for long-term left-lateral slip, does it appear at the present time to be accumulating left-lateral simple shear strain across the fault due to slip at depth. Rather the motion is explained by right-lateral simple shear across the orthogonal ECSZ. Left-lateral slip on the Garlock fault will release the shear strain accumulating there but would augment the accumulating rotation, resulting in a secular clockwise rotation rate ∼80 nrad yr −1 (4.6° Myr −1 ).

California

Basin amplification effects in the Puget Lowland, Washington from strong motion recordings and 3D simulations

Sedimentary basins in the Puget Sound region, Washington State, increase ground‐motion intensity and duration of shaking during local earthquakes. We analyze Pacific Northwest Seismic Network and U.S. Geological Survey strong‐motion recordings of five local earthquakes ( M 3.9–6.8), including the 2001 Nisqually earthquake, to characterize sedimentary basin effects within the Seattle and Tacoma basins. We observe basin‐edge generated surface waves at sites within the Seattle basin for most ray paths that cross the Seattle fault zone. We also note previously undocumented basin‐edge surface waves in the Tacoma basin during one of the local earthquakes. To place quantitative constraints on basin amplification, we determine amplification factors by computing the spectral ratios of inside‐basin sites to outside‐basin sites at 1, 2, 3, and 5 s periods. Ground shaking is amplified in the Seattle basin for all the earthquakes analyzed and for a subset of events in the Tacoma basin. We find that the largest amplification factors in the Seattle basin are produced by a shallow earthquake located to the southwest of the basin. Our observation suggests that future shallow crustal and megathrust earthquakes rupturing west of the Puget Lowland will produce greater amplification within the Seattle basin than has been seen for intraslab events. We also perform ground‐motion simulations using a finite‐difference method to validate a 3D Cascadia velocity model (CVM) by comparing properties of observed and synthetic waveforms up to a frequency of 1 Hz. Basin‐edge effects are well reproduced in the Seattle basin, but are less well resolved in the Tacoma basin. Continued study of basin effects in the Tacoma basin would improve the CVM.

Washington

Structure, Quaternary history, and general geology of the Corral Canyon area, Los Angeles County, California

The Corral Canyon nuclear power plant site consists of about 305 acres near the mouth of Corral Canyon in the central Santa Monica Mountains; it is located on an east-trending segment of the Pacific Coast between Point Dume and Malibu Canyon, about 28 miles due west of Los Angeles. The Santa Monica Mountains are the southwesternmost mainland part of the Transverse Ranges province, the east-trending features of which transect the otherwise relatively uniform northwesterly trend of the geomorphic and geologic features of coastal California. The south margin of the Transverse Ranges is marked by the Santa Monica fault system, which extends eastward near the 34th parallel for at least 145 miles from near Santa Cruz Island to the San Andreas fault zone. In the central Santa Monica Mountains area the Santa Monica fault system includes the Malibu Coast fault and Malibu Coast zone of deformation on the north; from the south it includes an inferred fault--the Anacapa fault--considered to follow an east-trending topographic escarpmemt on the sea floor about 5 miles south of the Malibu Coast fault. The low-lying terrain south of the fault system, including the Los Angeles basin and the largely submerged Continental Borderland offshore, are dominated by northwest-trending structural features. The Malibu Coat zone is a wide, east-trending band of asymmetrically folded, sheared, and faulted bedrock that extends for more than 20 miles along the north margin of the Santa Monica fault system west of Santa Monica. Near the north margin of the Malibu Coast zone the north-dipping, east-trending Malibu Coast fault juxtaposes unlike, in part contemporaneous sedimentary rock sections; it is inferred to be the near-surface expression of a major crustal boundary between completely unrelated basement rocks. Comparison of contemporaneous structural features and stratigraphic sections (Late Cretaceous to middle Miocene sedimentary, rocks and middle Miocene volcanic and intrusive igneous rocks on the north; middle and upper Miocene sedimentary and middle Miocene volcanic rocks on the south) across the fault demonstrates that neither strike slip of less than 25 miles nor high-angle dip slip can account for this juxtaposition. Instead, the Malibu Coast fault is inferred to have been the locus of large-magnitude, north-south oriented, horizontal shortening (north, or upper, block thrust over south block). This movement occurred at or near the northern boundary of the Continental Borderland, the eastern boundary of which is inferred to be the northwest-trending known-active Newport-Inglewood zone of en echelon right lateral strike-slip faults in the western Los Angeles basin. Local structural features and their relation to regional features, such as those in the Malibu Coast zone, form the basis for the interpretation that the Malibu Coast fault has acted chiefly as a thrust fault. Within the Malibu Coast zone, on both sides of the Malibu Coast fault, structural features in rocks that range in age from Late Cretaceous to late Miocene are remarkably uniform in orientation. The predominant trend of bedding, axial surfaces of numerous asymmetric folds, locally pervasive shear surfaces, and faults is approximately east-west and their predominant dip is northward.. The axes of the folds plunge gently east or west. Evidence from faults and shears within the zone indicates that relative movement on most of these was north (upper) over south. Beyond the Malibu Coast zone to the north and south the rocks entirely lack the asymmetric folds, overturned beds, and the locally abundant shears that characterize the rocks within the zone; these rocks were therefore not subjected to the same deforming forces that existed near the Malibu Coast fault. Movement on the Malibu Coast fault and deformation in the Malibu Coast zone occurred chiefly during the interval between late Miocene and late Pleistocene time. The youngest-known faulting in the Malibu Coast zone is late Pl

Open-File Report

Aquifer tests and simulation of ground-water flow in Triassic sedimentary rocks near Colmar, Bucks and Montgomery Counties, Pennsylvania

This report presents the results of a study by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency to evaluate ground-water flow in Triassic sedimentary rocks near Colmar, in Bucks and Montgomery Counties, Pa. The study was conducted to help the U.S. Environmental Protection Agency evaluate remediation alternatives at the North Penn Area 5 Superfund Site near Colmar, where ground water has been contaminated by volatile organic solvents (primarily trichloroethene). The investigation focused on determining the (1) drawdown caused by separately pumping North PennWater Authority wells NP–21 and NP–87, (2) probable paths of groundwater movement under present-day (2000) conditions (with NP–21 discontinued), and (3) areas contributing recharge to wells if pumping from wells NP-21 or NP–87 were restarted and new recovery wells were installed. Drawdown was calculated from water levels measured in observation wells during aquifer tests of NP–21 and NP–87. The direction of ground-water flow was estimated by use of a three-dimensional ground-water-flow model. Aquifer tests were conducted by pumping NP–21 for about 7 days at 257 gallons per minute in June 2000 and NP–87 for 3 days at 402 gallons per minute in May 2002. Drawdown was measured in 45 observation wells during the NP–21 test and 35 observation wells during the NP–87 test. Drawdown in observation wells ranged from 0 to 6.8 feet at the end of the NP–21 test and 0.5 to 12 feet at the end of the NP–87 test. The aquifer tests showed that ground-water levels declined mostly in observation wells that were completed in the geologic units penetrated by the pumped wells. Because the geologic units dip about 27 degrees to the northwest, shallow wells up dip to the southeast of the pumped well showed a good hydraulic connection to the geologic units stressed by pumping. Most observation wells down dip from the pumping well penetrated units higher in the stratigraphic section that were not well connected to the units stressed by pumping. The best hydraulic connection to the pumped wells was indicated by large drawdown in observation wells that penetrate the water-bearing unit encountered below 400 feet below land surface in wells NP–21 and NP–87. The hydraulic connection between wells NP–21 (or NP–87) and observation wells in the southern area of ground-water contamination near the BAE Systems facility is good because the observation wells probably penetrate this water-bearing unit. A 3-dimensional, finite-difference, groundwater- flow model was used to simulate flow paths and areas contributing recharge to wells for current (2000) conditions of pumping in the Colmar area and for hypothetical situations of pumping suggested by the U.S. Environmental Protection Agency that might be used for remediation. Simulations indicate that under current conditions, ground water in the northern area of contamination near the former Stabilus facility moves to the northwest and discharges mostly to West Branch Neshaminy Creek; in the southern area of contamination near BAE Systems facility, ground water probably moves west and discharges to a tributary of West Branch Neshaminy Creek near well NP–21. Model simulations indicate that if NP–21 or NP–87 are pumped at 400 gallons per minute, groundwater recharge is likely captured from the southern area of contamination, but ground-water recharge from the northern area of contamination is less likely to be captured by the pumping. Simulations also indicate that pumping of a new recovery well near BAE Systems facility at 8 gallons per minute and two new recovery wells near the former Stabilus facility at a total of about 30 gallons per minute probably would capture most of the ground-water recharge in the areas where contamination is greatest.

Water-Resources Investigations Report

Fifty-year record of glacier change reveals shifting climate in the Pacific Northwest and Alaska, USA

Fifty years of U.S. Geological Survey (USGS) research on glacier change shows recent dramatic shrinkage of glaciers in three climatic regions of the United States. These long periods of record provide clues to the climate shifts that may be driving glacier change. The USGS Benchmark Glacier Program began in 1957 as a result of research efforts during the International Geophysical Year (Meier and others, 1971). Annual data collection occurs at three glaciers that represent three climatic regions in the United States: South Cascade Glacier in the Cascade Mountains of Washington State; Wolverine Glacier on the Kenai Peninsula near Anchorage, Alaska; and Gulkana Glacier in the interior of Alaska (fig. 1).

Alaska, British Columbia, Washington

Engineering geology as applied to highway construction

A geologic study of the site for a relocated segment of State Highway 93 northwest of Denver Colo., was made by by the Engineering Geology Branch of the U.S. Geological Survey as a demonstration of the applicability of geologic mapping to problems of highway construction. The relocated segment provides access to the Rocky Flats plant of the Atomic Energy Commission. The geologic conditions along five miles of the relocation route were examined. In most places apparently well-indurated sandstones of the Upper Cretaceous Fox Hills sandstone and Laramie formation can be excavated without using explosives. The intersection of a six foot thick coal seam in the roadbed in one proposed cut was predicted and removal and replacement with more suitable subgrade material was recommended. Near Marshall the alignment crosses three northeast-trending normal faults which do not adversely affect the highway. Clay minerals with expanding properties are present in some of the claystones of the Laramie, and special measures must be taken to ensure that ground water will not seep into them and cause swelling beneath the roadbed. Late Tertiary or Early Quaternary gravel cap pediments along the mountain front. Ground water issuing from seeps and springs found at the contact between these gravels and the underlying bedrock should be intercepted and removed from beneath the roadbed.

Colorado

Geologic implications of aeromagnetic data for the eastern continental margin of the United States

An aeromagnetic survey extending from the Gulf of Maine to the tip of Florida was conducted by the U. S. Naval Oceanographic Office between 1964 and 1966. Flight traverses were flown in a northwesterly direction at right angles to the geologic grain. The flight lines were approximately 800 km long and had an 8-km separation. The survey traversed part of the New England, Piedmont, and Coastal Plain provinces and extended some 320 km beyond the continental shelf into the Atlantic Ocean. Despite the wide flight-line spacing, numerous geological and structural features became apparent from this survey. Interpretation of these features was aided by using the available gravity and seismic data in addition to the State and Provincial geologic maps. The residual aeromagnetic map shows a continuous magnetic high on or near the continental slope as far south as the 31st parallel. At about the 36th parallel, this east-coast magnetic anomaly splits into two branches, and both of them parallel the 850-fathom contour. At the 31st parallel, the outer branch of the anomaly swings westward and crosses the coastline near Brunswick, Georgia. This continuous magnetic anomaly may result from an igneous intrusive body that parallels the edge of the pre-Paleozoic continental landmass. These magnetic data suggest that Florida and part of Georgia were added to the paleo-continent in pre-Paleozoic time. Landward from the east-coast anomaly, the magnetic field is quite variable, whereas oceanward it has an extremely small gradient. The absence of magnetic anomalies east of the continental slope suggests that in this region layer 2 may be composed of metamorphosed basalt. The characteristic magnetic patterns observed over the Piedmont and New England provinces extend oceanward to the east-coast anomaly.

Eastern United States

GIS data for the Seaside, Oregon, Tsunami Pilot Study to modernize FEMA flood hazard maps

A Tsunami Pilot Study was conducted for the area surrounding the coastal town of Seaside, Oregon, as part of the Federal Emergency Management's (FEMA) Flood Insurance Rate Map Modernization Program (Tsunami Pilot Study Working Group, 2006). The Cascadia subduction zone extends from Cape Mendocino, California, to Vancouver Island, Canada. The Seaside area was chosen because it is typical of many coastal communities subject to tsunamis generated by far- and near-field (Cascadia) earthquakes. Two goals of the pilot study were to develop probabilistic 100-year and 500-year tsunami inundation maps using Probabilistic Tsunami Hazard Analysis (PTHA) and to provide recommendations for improving tsunami hazard assessment guidelines for FEMA and state and local agencies. The study was an interagency effort by the National Oceanic and Atmospheric Administration, U.S. Geological Survey, and FEMA, in collaboration with the University of Southern California, Middle East Technical University, Portland State University, Horning Geoscience, Northwest Hydraulics Consultants, and the Oregon Department of Geological and Mineral Industries. The pilot study model data and results are published separately as a geographic information systems (GIS) data report (Wong and others, 2006). The flood maps and GIS data are briefly described here.

Oregon

Uranium-bearing coal in the central part of the Great Divide basin, Sweetwater County, Wyoming

Field work leading to this report was done by the U.S. Geological Survey for the Division of Raw Materials of the U.S. Atomic Energy Commission. Nearly 24 townships were mapped in the central part of the Great Divide Basin, Sweetwater County, Wyoming. Fourteen of these townships contain outcrops of uranium-bearing coal. Thirty coal beds were mapped, but only seven of them have uranium-bearing coal reserves as defined in this report. Coal beds 2.5 or more feet thick are considered in calculating coal reserves, and of these, only beds containing 0.003 or more percent uranium are considered in calculating reserves of uranium in coal. Reserves of uranium in coal ash include those beds 2.5 or more feet thick that contain 0.015 or more percent uranium in coal ash. Measured and indicated coal reserves total about 700,000,000 short tons which contain about 2,600 short tons of uranium in the coal, or about 2,400 short tons of uranium in the coal ash. Strippable reserves, defined as reserves in beds beneath 60 or less feet of overburden, are about 250,000,000 short tons of coal containing about 1,100 short tons of uranium in coal, or about 600 tons of uranium in coal ash. The thickest coal beds underlie a relatively narrow belt that trends northwest and coincides approximately with the axis of the Red Desert syncline. The coal beds contain the most uranium on the east flank of the syncline near the southwesternmost edge of the Battle Spring formation (new). This formation is of early and middle Eocene age and consists predominantly of very coarse-grained arkosic sandstone which is highly permeable. It intertongues southwestward with the Tess permeable Green River and Wasatch formations. The Green River formation consists from youngest to oldest of the Morrow Creek and Laney shale members and the Tipton and Luman (new) tongues. The Wasatch formation interfingers with the Green River formation and consists from youngest to oldest of the Cathedral Bluffs, Niland, and Red Desert tongues. The latter two are here recognized for the first time and contain all the coal beds in the Wasatch formation. The Morrow Creek member of the Green River formation is of middle Eocene age. The Laney member and Cathedral Bluffs tongue of the Green River and Wasatch formation, respectively intertongue and are in part equivalent, and are of early or middle Eocene age. The other units are of early Eocene age. A broad gentle arch which is either the eastern extension of the Wamsutter arch, or a separate arch en echelon to it, separates the Washakie Basin the southeastern part of the map area from the Red Desert syncline in the northeastern part. The Red Desert syncline plunges gently northwest into the nearly circular structural Niland basin. The south flank of the Wamsutter(?) arch dips southeastward at an average rate of about 230 feet per mile. The northern flank of the arch dips northeastward at an average rate of about 140 feet per mile. North of the Niland basin, the structure is more complex and is dominated by a northwestwardtrending graben which parallels and includes the Cyclone Rim in the northern part of die map area. Schroeckingerite deposits in the northeastern part of the map area lie within this graben in a sequence of arkosic sandstone and clay shale stratigraphically equivalent to the lower part of the Cathedral Bluffs tongue of the Wasatch formation and to the uppermost part of the Tipton tongue of the Green River formation. Weakly radioactive tuffaceous sandstone beds of the Browns Park formation that probably once blanketed the entire Great Divide Basin are preserved a short distance north and northwest of the schroeckingerite deposits. The geologic settings of the schroeckingerite and uranium-bearing coal are similar and their source of uranium is probably the same. The uranium probably was leached from tuffaceous beds in the Browns Park formation and carried to its present site of deposition by groundwater whose circulation was guided by structure and changes in facies.

Wyoming

Geologic map of northeastern Seattle (part of the Seattle North 7.5' x 15' quadrangle), King County, Washington

This geologic map, approximately coincident with the east half of the Seattle North 7.5 x 15’ quadrangle (herein, informally called the “Seattle NE map”), covers nearly half of the City of Seattle and reaches from Lake Washington across to the Puget Sound shoreline. Land uses are mainly residential, but extensive commercial districts are located in the Northgate neighborhood, adjacent to the University of Washington, and along the corridors of Aurora Avenue North and Lake City Way. Industrial activity is concentrated along the Lake Washington Ship Canal and around Lake Union. One small piece of land outside of the quadrangle boundaries, at the west edge of the Bellevue North quadrangle, is included on this map for geographic continuity. Conversely, a small area in the northeast corner of the Seattle North quadrangle, on the eastside of Lake Washington, is excluded from this map. Within the boundaries of the map area are two large urban lakes, including the most heavily visited park in the State of Washington (Green Lake Park); a stream (Thornton Creek) that still hosts anadromous salmon despite having its headwaters in a golfcourse and a shopping center; parts of three cities, with a combined residential population of about 300,000 people; and the region’s premier research institution, the University of Washington. The north boundary of the map is roughly NE 168th Street in the cities of Shoreline and Lake Forest Park, and the south boundary corresponds to Mercer Street in Seattle. The west boundary is 15th Avenue W (and NW), and the east boundary is formed by Lake Washington. Elevations range from sea level to a maximum of 165 m (541 ft), the latter on a broad till-covered knob in the city of Shoreline near the northwest corner of the map. Previous geologic maps of this area include those of Waldron and others (1962), Galster and Laprade (1991), and Yount and others (1993). Seattle lies within the Puget Lowland, an elongate structural and topographic basin between the Cascade Range and Olympic Mountains. The Seattle area has been glaciated repeatedly during the past two million years by coalescing glaciers that advanced southward from British Columbia. The landscape we see today was molded by cyclic glacial scouring and deposition and later modified by landsliding and stream erosion. The last ice sheet reached the central Puget Sound region about 14,500 years ago, as measured by 14 C dating, and it had retreated from this area by 13,650 14 C yr B.P. (equivalent calendar years are about 17,600 and 16,600 years ago; Porter and Swanson, 1998). Seattle now sits atop a complex and incomplete succession of interleaved glacial and nonglacial deposits that overlie an irregular bedrock surface. These glacial and nonglacial deposits vary laterally in both texture and thickness, and they contain many local unconformities. In addition, they have been deformed by faults and folds, at least as recently as 1,100 years ago, and this deformation further complicates the geologic record. The landforms and near-surface deposits that cover much of the Seattle NE map area record a relatively brief, recent interval of the region’s geologic history. The topography is dominated in the north by a broad, fluted, and south-sloping upland plateau, which gives way to a more complex set of elongated hills in the map’s southern half. The valleys of Pipers Creek, Green Lake, and Thornton Creek mark the transition between these two topographic areas. Most of the uplands are mantled by a rolling surface of sand (unit Qva) and till (unit Qvt) deposited during the last occupation of the Puget Lowland by a continental ice sheet. Beneath these ice sheet deposits is a complex succession of older sediments that extends far below sea level across most of the map area. These older sediments are now locally exposed where modern erosion and landslides have sliced through the edge of the upland, and where subglacial processes apparently left these older sediments largely free of overlying sediments. Lack of overlying sediments is particularly evident on the hillslopes above Thornton Creek, adjacent to Lake Washington, and on the flanks of Capitol Hill.

Washington

Geology and ground water of the Savannah River Plant and vicinity, South Carolina

The area described in this report covers approximately 2,600 square miles in west-central South Carolina and includes the site of the Savannah River Plant, a major production facility of the U.S. Atomic Energy Commission. The climate, surface drainage, and land forms of the study area are typical of the southern part of the Atlantic Coastal Plain. Precipitation is normally abundant and fairly evenly distributed throughout the year, and the mean annual temperature is moderately warm (64?F). The major streams that drain the area (the Savannah, Salkehatchie, and Edisto Rivers) have low gradients and flow in a southeasterly direction toward the Atlantic Ocean. Surface features of the area include narrow, flat-bottomed, steep-sided valleys and broad gently rolling interfluvial areas. Those parts of the Coastal Plain included within the report area can be subdivided into the Aiken Plateau, the Congaree Sandhills, and the Coastal Terraces. The area is underlain by a sequence of unconsolidated and partly consolidated sediments of Late Cretaceous, Tertiary, and Quaternary age. The unconsolidated sediments were deposited unconformably on a basement of igneous and metamorphic rocks of Precambrian and Paleozoic age and sedimentary rocks of Triassic age. The basement rocks are similar to the granite-diorite complex of the Charlotte Belt, the metamorphosed rocks of the Carolina Slate Belt, and the consolidated sediments of the Newark Group. The unconsolidated sediments strike about N. 60 ? E. and dip 6-20 feet per mile to the southeast. They form a wedge-shaped mass that increases in thickness toward the southeast to slightly more than 1,200 feet in the vicinity of Allendale, S.C., on the southeast or downdip side of the study area. The oldest or lowermost unconsolidated sedimentary unit, the Tuscaloosa Formation of Late Cretaceous age, is overlain in the subsurface by beds that are also probably Late Cretaceous in age and that herein are named the Ellenton Formation. The Upper Cretaceous deposits are, in turn, overlain by the, McBean Formation and the Congaree(?) Formation of middle Eocene age, the Barnwell Formation of late Eocene age, the Hawthorn Formation of early and middle Miocene age, and by fluvial and marine(?) terrace deposits of Pliocene(?), Pleistocene, and Recent age. In the mapped area, the Congaree(?) Formation includes undifferentiated rocks (mostly Congaree and Barnwell Formations and some Mcbean outliers). (See map explanation.) Structurally, the Upper Cretaceous sediments are overlapped to the northwest by Tertiary deposits. A preliminary geologic map of the general area is included in the report. The principal aquifer in the area is composed of the beds of medium to coarse sand and gravel contained in the Tuscaloosa and Ellenton Formations. Subordinate aquifers include deposits of sand and limestone of Tertiary and Quaternary age. The ground water in the principal aquifer occurs under water-table conditions in the outcrop area of the Tuscaloosa Formation in the northern and western parts of the study area, but it is under artesian pressure downdip in the southern and eastern parts of the study area. Contours drawn on the piezometric surface of the water in the principal aquifer indicate that water is recharged to the aquifer mainly by leakage through the overlying Tertiary formations. Likewise, the piezometric contours show that the outcrop area of the Tuscaloosa Formation functions chiefly as an area of discharge. Doubtless, water is also discharged from the aquifer by moving downdip to areas near the coast where the prevailing hydraulic gradient may favor the upward leakage of water through the upper confining beds. The hydraulic properties of the principal aquifer were determined by a series of pumping tests. The results indicate that the aquifer is highly productive and could supply 15 million gallons per day in the vicinity of the Savannah River Plant without exceeding the available drawdown.

South Carolina

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon

Assessment of undiscovered conventional oil and gas resources of Bonaparte Basin, Browse Basin, Northwest Shelf, and Gippsland Basin Provinces, Australia, 2011

Using a geology-based assessment methodology, the U.S. Geological Survey estimated means of 4.7 billion barrels of undiscovered oil and 227 trillion cubic feet of undiscovered natural gas in three major offshore petroleum basins of northwest Australia and in the Gippsland Basin of southeast Australia.

Bonaparte Basin;Browse Basin;Northwest Shelf;Gipps

Geoelectric hazard maps for the Pacific Northwest

Maps of extreme value, horizontal component geoelectric field amplitude are constructed for the Pacific Northwest United States (and parts of neighboring Canada). Multidecade long geoelectric field time series are calculated by convolving Earth surface impedance tensors from 71 discrete magnetotelluric survey sites across the region with historical 1‐min (2‐min Nyquist) geomagnetic variation time series obtained from two nearby observatories. After fitting statistical models to 1‐min geoelectric amplitudes realized during magnetic storms, extrapolations are made to estimate threshold amplitudes that are only exceeded, on average, once per century. One hundred‐year geoelectric exceedance amplitudes range from 0.06 V/km at a survey site in western Washington State to 9.47 V/km at a site in southeast British Columbia; 100‐year geoelectric exceedance amplitudes equal 7.10 V/km at a site north of Seattle and 2.28 V/km at a site north of Portland. Systematic and random errors are estimated to be less than 20%, much less than site‐to‐site differences in geoelectric amplitude that arise from site‐to‐site differences in surface impedance. Maps of 100‐year exceedance amplitudes are compared with the peak geoelectric amplitudes realized during the March 1989 magnetic superstorm; it is noted that some storms of relatively modest intensity can generate localized geoelectric fields of relatively high amplitude. The geography of geoelectric hazard across the Pacific Northwest is closely related to known geologic and tectonic structures.

Pacific Northwest

Preliminary geologic map of the White Sulphur Springs 30' x 60' Quadrangle, Montana

The geologic map of the White Sulphur Springs quadrangle, scale 1:100,000, was made as part of the Montana Investigations Project to provide new information on the stratigraphy, structure, and geologic history of the geologically complex area in west-central Montana. The quadrangle encompasses about 4,235 km2 (1,635 mi2), across part of the Smith River basin, the west end of the Little Belt Mountains, the Castle Mountains, and the upper parts of the basins of the North Forks of the Smith and Musselshell Rivers and the Judith River. Geologically the quadrangle extends across the eastern part of the Helena structural salient in the Rocky Mountain thrust belt, a segment of the Lewis and Clark tectonic zone, west end of the ancestral central Montana uplift, and the southwest edge of the Judith basin. Rocks and sediments in the White Sulphur Springs quadrangle are assigned to 88 map units on the basis of rock or sediment type and age. The oldest rock exposed is Neoarchean diorite that is infolded with Paleoproterozoic metamorphic rocks including gneiss, diorite, granite, amphibolite, schist, and mixed metamorphic rock types. A thick succession of the Mesoproterozoic Belt Supergroup unconformably overlies the metamorphic rocks and, in turn, is overlain unconformably by Phanerozoic sedimentary and volcanic rocks. Across most of the quadrangle, the pre-Tertiary stratigraphic succession is intruded by Eocene dikes, sills, and plutons. The central part of the Little Belt Mountains is generally underlain by laccoliths and sheet-like bodies of quartz monzonite or dacite. Oligocene andesitic basalt flows in the western and southern part of the quadrangle document both the configuration of the late Eocene erosional surfaces and the extent of extensional faulting younger than early Oligocene in the area. Pliocene, Miocene, and Oligocene strata, mapped as 11 units, consist generally of interbedded sand, gravel, and tuffaceous sedimentary rock. Quaternary and Quaternary-Tertiary sediments rest across the older Cenozoic deposits and across all older rocks. The Quaternary and Quaternary-Tertiary deposits generally are gravels that mantle broad erosional surfaces on the flanks of the mountains, gravels in stream channels, and colluvium and landslide deposits on hill sides. Glacial deposits, representing at least two stages of glaciation, are present in the northern part of the Little Belt Mountains. The geologic structure of much of the northwest part of the quadrangle is a broad uplift, in the core of which the Paleoproterozoic and Neoarchean metamorphic rocks are exposed. Down plunge to the east, the succession of Phanerozoic sedimentary rocks define an east-trending arch, cored locally by Mesoproterozoic strata of the Belt Supergroup. The north flank of the arch dips steeply north as a monocline. Stratigraphic relations among Mississippian, Pennsylvanian, and Jurassic strata document the recurrent uplift and erosion on that north flank. The broader arch of the Little Belt Mountains reflects the west plunge of the ancestral Central Montana uplift. The eastern extension of the Lewis and Clark tectonic zone is exposed in the southern half of the quadrangle where the Volcano Valley fault zone curves from west to southeast as a reverse fault along which the latest movement is up on the south side. The fault zone ends in an anticline in the south-central margin of the quadrangle. Stratigraphic overlap of Phanerozoic strata over the truncated edges of Mesoproterozoic units documents that the area of the eastern terminus of the fault zone was tectonically recurrently active. Northeast trending strike-slip faults displace Mesoproterozoic rocks in the northwest and south-central parts of the quadrangle. Several of those faults are overlain unconformably by the Middle Cambrian Flathead Sandstone. Other north-east and west-trending faults across the central part of the quadrangle are intruded by middle Eocene plutons. You

Montana