Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological Society of America Bulletin, Part I”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS1964

Relation of temperature distribution to ground-water movement in carbonate rocks of central Israel

The Cenomanian-Turonian formations of central Israel constitute a highly permeable dolomite and limestone aquifer. In this area it is on the west limb of an anticlinorium that trends north-northeast, and it contains water under artesian pressure. A graph of water temperatures and well depths suggests that there is a very small vertical temperature gradient in local segments of the aquifer. The small gradient is believed to result from a large vertical component of flow that tends to equalize the vertical temperature distribution . On a regional scale the apparent horizontal temperature distribution indicates a westward increase with increasing depth of the aquifer, suggesting a manifestation of the regional geothermal gradient. The westward increase in temperature also implies that the lateral component of flow may be in the normal range for artesian carbonate - rock aquifers whose pores consist mainly of solution cavities. Locally, pumping appears to have affected the temperature distribution by modifying the natural flow pattern. In parts of the most intensively developed area, the aquifer is hydraulically connected with overlying coastal-plain deposits, and some cooler water has been induced to move into the aquifer from this source. At three other areas, pumping has resulted in an apparent horizontal shift of the isotherms on a temperature - distribution map. The data suggest that the spatial distribution of temperature may be used to determine some of the flow characteristics of carbonate - rock aquifers.

Geological Society of America Bulletin↗
USGS1970

Thermal infrared investigations, Arbuckle Mountains, Oklahoma

Thermal-infrared images obtained on flights over the Tishomingo anticline and South Flank areas near Mill Creek in the Arbuckle Mountains, Oklahoma, were used to study the possibility of identifying some common rock types from their diagnostic reflection and emission characteristics, and to evaluate the usefulness of infrared images in structural geologic investigations. The areas flown are underlain by folded and faulted Paleozoic dolomite, limestone, sandstone, shale, and Precambrian granite. Images were obtained at 6:00 a.m., 11:00 a.m., and 2:00 p.m. The predawn (6:00 a.m.) image is the most useful in distinguishing rock types. Of particular interest is a thermal contrast of dolomite (warm) and limestone (cool), sufficient to distinguish those rock types and to reveal facies changes between them. Theoretical considerations indicate that this thermal contrast arises from a combination of albedo and thermal-inertia characteristics distinctive of dolomites and limestones in many areas. The daytime images display much stratigraphic and structural detail. Small-scale bedding detail is enhanced in the morning images of low-relief areas, and contrasts of alternating formations that form hogbacks and valleys are enhanced in the afternoon images of higher relief areas. The difference in features displayed in morning and afternoon images appears to be a function of the insolation on sunward and shadowed slopes of differing scale. Fault or fracture zones are best displayed in the predawn image; they appear cooler than surrounding ground, because of greater water content and concomitant evaporation. The abundance and throughgoing nature of lineaments (which coincide for the most part with joint systems) are more obvious in the infrared images than in aerial photographs. Lineaments striking northwest are preferentially enhanced in the morning images, and lineaments striking northeast are preferentially shown in the afternoon images. This enhancement cannot be ascribed to the effects of topography, insolation, or wind; it may relate to a combination of ground-water and vegetation effects.

Oklahoma↗
USGS1971

Thin skin distension in Tertiary rocks of southeastern Nevada

Volcanic rocks of late Tertiary age, aggregating about 17,000 ft, accumulated on a surface of low relief cut on Precambrian rocks in the Basin and Range province south of Lake Mead, in Nevada and Arizona. They consist mostly of lava and flow breccia of intermediate composition with minor ash-flow tuff, bedded tuff, and lava of rhyolitic composition. The last of three main phases of volcanism was accompanied by widespread epizonal plutonism and intense faulting. All or parts of six similarly but separately fault-deformed structural units are recognized in a 92-sq-mi mapped area. The structural units are highly distended by a system of closely spaced north-to northwest-striking shingling normal faults (many of which are low angle) that displace younger over older rocks in a west to west-southwest direction. Cumulative amounts of distension approximate the breadth of the structural units and are as much as 20,000 ft, whereas cumulative vertical displacements are much less and in some places are minimal. The structural units are floored at or near the present level of exposure by complex low-angle zones of detachment or décollement into which the numerous shingling normal faults merge. Where the units abut along their strike, they are separated by complex zones of transcurrent faults that appear to merge with the detachment structures and thus mark the ultimate limits of the structural units. Displacement on the detachment structures has the same sense as, but in some places is much greater than, that of the cumulative offset on the shingling faults, thus indicating low-angle movement of the structural units as platelike or lobate masses. These relationships indicate remarkably thin-skinned, large-scale, fault-related tectonism of a type which is present in a broad belt south of Lake Mead and in numerous other areas in the Basin and Range province. The best exposed structural units exhibit a serial eastward progression from broad areas of steeply dipping strata, low-angle faults, and deep denudation to gently dipping strata, high-angle faults, and little denudation. Reverse-drag flexing, a volume-compensating mechanism for movement on concave-upward faults, is inferred to have produced the gentle to moderate dips of the strata, whereas the nearly vertical dips in the western parts of the units probably resulted from a combination of reverse-drag flexing and rotation related to uplift. Evidence of compression-related folding is absent. The extreme distension is viewed as a surficial feature of a crustal belt that was subjected to a brief episode of tensional rifting. Rifting at subjacent levels along the belt was compensated for by emplacement of plutons. The surficial rocks were stretched and thinned over the plutons.

Nevada↗
USGS1975

The vourinos ophiolite, Greece: Cyclic units of lineated cumulates overlying harzburgite tectonite

Re-examination of the Vourinos ophiolite shows it to be composed of metamorphic tectonites, cumulates, plagiogranites, dikes, and lava. The contact between the tectonites and the cumulates is exposed and sharp. Beneath the cumulate contact, the rocks have been highly deformed and complexly folded; above that contact, they simply have been tilted vertically to expose a stratiform complex 1,500 m (4,800 ft) thick. The stratiform intrusion is characterized by cyclic units, rich in olivine at the base, and rich in feldspar at the top. Some cumulus diorites are present at the top of the section which grade into quartz diorites (plagiogranites) with hypautomorphic textures. Lineate lamination characterizes the cumulates and may indicate the direction or orientation of the Mesozoic mid-oceanic ridge crest with respect to the present position of the complex. A siliceous dike swarm cuts the upper part of the stratiform complex. The section suggests that in the case of Vourinos, a large magmatic chamber formed at a mid-oceanic ridge crest and that intrusion was a much more important process than extrusion in the formation of oceanic crust in that area. The reported presence of cumulates in many other ophiolite complexes suggests that these relations may obtain generally at most or all spreading ridges. The contact between the tectonites and the cumulates of the complex would not have corresponded with seismic M. © 1975 Geological Society of America.

Geological Society of America Bulletin↗
USGS2019

Relaxing segmentation on the Wasatch Fault Zone: Impact on seismic hazard

The multisegment Wasatch fault zone is a well-studied normal fault in the western United States that has paleoseismic evidence of recurrent Holocene surface-faulting earthquakes. Along the 270-km-long central part of the fault, four primary structural complexities provide possible along-strike limits to these ruptures and form the basis for models of fault segmentation. Here, we assess the impact that the Wasatch fault segmentation model has on seismic hazard by evaluating the time-independent long-term rate of ruptures on the fault that satisfy fault slip rates and paleoseismic event rates, adapting standard inverse theory used in the Uniform California Earthquake Rupture Forecast 3 (UCERF3), and implementing a segmentation constraint where ruptures across primary structural complexities are penalized. We define three models with varying degrees of rupture penalization: (1) segmented (ruptures confined to individual segments), (2) penalized (multi-segment ruptures allowed, but penalized), and (3) unsegmented (all ruptures allowed). Seismic-hazard results show that on average, hazard is highest for the segmented model, where seismic moment is accommodated by frequent moderate (moment magnitude, M w 6.2–6.8) earthquakes. The unsegmented model yields the lowest average seismic hazard because part of the seismic moment is accommodated by large (M w 6.9–7.9), but infrequent ruptures. We compare these results to model differences derived from other inputs such as slip rate and magnitude scaling relationships and conclude that segmentation exerts a primary control on seismic hazard. This study demonstrates the need for additional geologic constraints on rupture extent and methods by which these observations can be included in hazard-modeling efforts.

Utah↗
USGS1973

Age and correlation of the Windermere Group in northeastern Washington

Greenstone of basaltic composition forms the middle part of the Windermere System in southern British Columbia and the correlative Windermere Group in northeastern Washington. The greenstone, together with the rest of the Windermere in this region, is highly sheared, altered, and metamorphosed, except for a small exposed mass of relatively unaffected rocks near the community of Chewelah, Washington. K-Ar ages on whole rocks and mineral separates from the Chewelah area indicate the greenstone was probably extruded between 827 and 918 m.y. ago.

Washington↗
USGS1953

Geology of the west-central part of the Gunnison Plateau, Utah

A detailed study of the west-central part of the Gunnison Plateau, Utah, has disclosed stratigraphic and structural relations important in the geological history of central Utah. The area mapped includes the eastern half of the Axtell No. 2 quadrangle, Manti area (U. S. Dept. of Agriculture, Soil Conservation Service). The bedrock ranges in age from the Arapien shale (Upper Jurassic) to the Green River formation (Eocene). The North Horn formation (Cretaceous-Tertiary), the Flagstaff limestone (Paleocene-Eocene), and the Green River formation (Eocene) successively overlap the Arapien shale and the Indianola group in the northern part of the area. In the southern part of the area, the North Horn formation and the Flagstaff limestone successively overlap the Price River conglomerate with angular discordance. The latter relation establishes a post-Price River and pre-North Horn orogenic movement in central Utah. A conspicuous west-dipping monocline, broken by many high-angle faults and a graben, extends along most of the western margin of the area. This structure is similar to the monocline and graben in the Wasatch Plateau to the east. At one point in the northern part of the area, the North Horn and the overlying Flagstaff oppose the Arapien shale across a high-angle fault. The Green River formation extends across the fault and overlaps the Arapien. This relation suggests faulting between Flagstaff and Green River time because the Colton formation, which normally occurs between the Flagstaff and Green River, cannot be differentiated in this immediate area. Numerous small intrusive masses of monzonite porphyry of post-Upper Jurassic age occur in the Arapien shale.

Utah↗
USGS1973

Fusion Relations in the System NaAlSi3O8-CaAl2Si2O8-KAlSi3O8-SiO2-H2O and Generation of Granitic Magmas in the Sierra Nevada Batholith

Chemical analyses of 167 typical specimens indicate that about 95 percent of the intrusive rocks of the central Sierra Nevada contain more than 79 percent normative Ab + An + Or + Qz. If the composition of the lower continental crust is similar to or slightly more felsic than andesite, as seems likely, the system NaAlSi 3 O 8 -CaAl 2 Si 2 O 8 -KAlSi 3 O 8 -SiO 2 -H 2 O provides an excellent chemical model for testing various schemes of fusion of the lower crust and crystallization of the resulting magmas. From consideration of this system in conjunction with field and petrographic data, we conclude that the intrusive rocks are best explained by repeated episodes of equilibrium fusion corresponding to magmatic sequences defined by field, petrologic, chemical, and geochronologic data. Fractional crystallization of the crystal-liquid mush generated by equilibrium fusion, coupled with periodic upward or lateral movement of the less crystallized central part of the magma, would produce the characteristic mafic to felsic sequence of intrusion; each mafic to felsic sequence corresponds to a separate equilibrium fusion event. In contrast, a close approach to fractional fusion of the lower crust is inadequate for obtaining most of the plutonic rocks, because rock compositions capable of being produced by this process do not match those observed. Normal amounts of conductive heat from the mantle and from radioactive decay in the crust may have been capable of causing fusion in the deepest parts of a thickened crust under the central part of the Sierra Nevada without the aid of a transient heat source from the mantle, but would have been inadequate where the crust was thin in the western Sierra Nevada. However, upward transport of andesitic and basaltic magmas generated along a Mesozoic subduction zone dipping beneath the Sierra Nevada would have provided sufficient additional heat to make fusion of the lower crust unavoidable. This implies that a major portion of the present batholith must have been derived from the lower crust.

California↗
USGS1963

Geologic history of the teays valley in West Virginia

The segment of the abandoned pre-Pleistocene Teays Valley between Scary and Huntington, W. Va. stands 130-240 feet above the Ohio and Kanawha rivers, and its bedrock floor slopes westward at about 0.6 foot per mile. The bedrock floor is overlain by highly weathered gravel in which a soil profile developed; only resistant siliceous materials remain. As much as 100 feet of locally derived sediments overlies the basal gravel. Sand was deposited at each end of the valley but in the east-central part it grades laterally into a laminated silty clay that was deposited during a period of ponding, probably in Kansan time. These deposits are deeply eroded. Probably during Illinoian time, ponding at a lower level resulted in deposition of a younger silty clay in the western part of the valley. This silty clay is weathered to a depth of about 14 feet. During a brief ponding in Wisconsin time, a widely scattered veneer of ice-rafted unweathered pebbles of igneous and metamorphic rocks was deposited. This veneer represents the youngest Pleistocene deposits in the valley and it occurs as much as 110 feet above the present Ohio River. Depositional, weathering, erosional, and topographic evidence argues that the Teays Valley in West Virginia was abandoned in late Tertiary or early Pleistocene time by normal stream-capture processes and that prolonged weathering followed. © 1963, The Geological Society of America, Inc.

West Virginia↗
USGS1971

Boulder Creek batholith, Colorado part III: Fingerprinting discordant zircon ages in a complex intrusion

The apparent ages (32 lead/alpha and 6 Pb 206 /U 238 ) of zircon as plotted on an isochron map of the Boulder Creek batholith define the following pattern: (1) very high ages (1600 to 1900 m.y.) within the outermost border zone on the southwest, south, and southeast; (2) transitional high ages (1300 to 1600 m.y.) within an inner border zone on the east and widening to the south and west to include about one-third of the batholith; (3) transitional low ages (1000 to 1300 m.y.) throughout much of the interior of the northern half; and (4) very low ages (1000 m.y. or less) limited to a small area within the northeast corner. The area of minimum age is shown to be part of the reduced-age aureole surrounding the 77 m.y. hornblende granodiorite stock at Jamestown that intrudes the Silver Plume Granite of the Longs Peak-St. Vrain batholith in the region immediately to the north of the minimum-age area of the Boulder Creek batholith. A southeastward elongation of the area of minimum age is attributed to channelway control of the solutions responsible for the recrystallization of the zircon by those northwest-trending breccia reefs that are cut by, or strike toward, the Laramide intrusion. Statistical studies of five zircon separates used for isotopic work showed that the frequency of grains having partial, or complete, rims of colorless zircon on purple to semiopaque zircon cores increased inversely with measured Pb 206 /U 238 age along a smooth curve that, when extrapolated, connected the point representing age of emplacement (0 percent rims) and the point representing the approximate age of re-crystallization (100 percent rims). Consequently, in the Boulder Creek zircon rim frequency gives a useful estimate of the amount of lead lost relative to uranium and thorium from a given sample during its recrystallization. The microstudy indicated: (1) the surface separating core and rim is a major discontinuity; (2) the greater part of the rims appear to be true overgrowths; and (3) the highest frequency of rims is found in the most metamict zircon. However, in any one sample a significant fraction of the most metamict zircon has been sheltered from reaction, presumably by inclusion within relatively impervious minerals, and remains free of rims. These observations coupled with the map evidence of selective channelway control point to warm solutions rather than dry heat as the agent of recrystallization and lead loss.

Colorado↗
USGS2005

Assembling an ignimbrite: Compositionally defined eruptive packages in the 1912 Valley of Ten Thousand Smokes ignimbrite, Alaska

The 1912 Valley of Ten Thousand Smokes (VTTS) ignimbrite was constructed from 9 compositionally distinct, sequentially emplaced packages, each with distinct proportions of rhyolite (R), dacite (D), and andesite (A) pumices that permit us to map package boundaries and flow paths from vent to distal extents. Changing pumice proportions and interbedding relationships link ignimbrite formation to coeval fall deposition during the first ∼16 h (Episode I) of the eruption. Pumice compositional proportions in the ignimbrite were estimated by counts on ≥100 lapilli at multiple levels in vertical sections wherever accessible and more widely over most of the ignimbrite surface in the VTTS. The initial, 100% rhyolite ignimbrite package (equivalent to regional fall Layer A and occupying ∼3.5 h) was followed by packages with increasing proportions of andesite, then dacite, emplaced over ∼12.5 h and equivalent to regional fall Layers B1-B3. Coeval fall deposits are locally intercalated with the ignimbrite and show parallel changes in R:D (rhyolite:dacite) proportions, but lack significant amounts of andesite. Andesite was thus dominantly a low-fountaining component in the eruption column and is preferentially represented in packages filling the VTTS north of the vent. The most extensive packages (3 and 4) occur in B1 and early B2 times where flow mobility and volume were optimized; earlier all-rhyolite flows (Package 1) were highly energetic but less voluminous, while later packages (5-9) were both less voluminous and emplaced at lower velocities. Package boundaries are expressed as one or more of the following: sharp color changes corresponding to compositional variations; persistent finer-grained basal parts of flow units; compaction swales filled by later packages; erosional channels cut by the flows that fill them; lobate accumulations of one package; and (mostly south of the vent) intercalated fall deposit layers. Clear flow-unit boundaries are best developed between ignimbrite of non-successive packages, indicating time breaks of tens of minutes to hours. Less well-defined stratification may represent rapidly emplaced successive flow units but often changes over short distances and indicates variations in localized depositional conditions.

Alaska↗
USGS1942

Correlation of the outcropping cretaceous formations of the Atlantic and Gulf Coastal Plain and trans-Pecos Texas

This is Number 9 of a series of correlation charts prepared by the Committee on Stratigraphy of the National Research Council, which will cover the post-Proterozoic sedimentary formations of North America. For general information about the project the reader is referred to the general introduction preceding this paper. The senior author, Lloyd W. Stephenson, is responsible for that part of the chart treating of the Upper Cretaceous series in the Atlantic and Gulf Coastal Plain (exceptions noted below) and the Lower Cretaceous series of the North Atlantic Coastal Plain; with respect to the Upper Cretaceous his presentation is based largely on his personal knowledge of the paleontology and stratigraphy of the area, gained from field and laboratory studies ranging from reconnaissance to detailed; all published information has been considered, and much of it utilized, but it is not practicable to include a complete bibliography. References are given to papers presenting views differing from those of the author, and to recent papers not yet listed in bibliographies. A complete bibliography of Texas geology through 1932 is given by Sellards (1933, p. 819-965). Watson H. Monroe has collaborated in the preparation of that part of the chart showing therelations of the Upper Cretaceous units in Alabama and Mississippi. The classification shown in the Upper Cretaceous part of the Delaware column is based on a recently published paper by Charles W. Carter (1937, p. 237-281). Philip B. King is responsible for the remainder of the chart covering the Lower Cretaceous (Comanche series) of central Texas (largely compiled from published sources) and all of the Cretaceous in trans-Pecos Texas (from personal knowledge and published sources). In March 1941 this part of the chart was checked by R. W. Imlay, and changes were made by King at his suggestion. References to the more important literature are given. In a correlation chart of this kind, in which age equivalencies are expressed by horizontal lining, it is obviously impossible to indicate relative thicknesses by vertical spacing. Hiatuses are indicated by vertical lining. The red-line overprint is intended to indicate certain important lithologic and faunal boundaries, and to assist the eye in recognizing the age relationships of the geologic units

Geological Society of America Bulletin↗
USGS1970

Boulder Creek batholith, Colorado part I: Allanite and its bearing upon age patterns

Allanite is abundant and commonly attains unusually large size as a late-replacement mineral in: (1) the comagnatic rocks of the Precambrian Boulder Creek batholith; (2) associated amphibolite xenoliths and related hybrid rocks; and (3) distinctly younger intrusions of Silver Plume Granite that cut the complex. Allanite porphyroblasts develop by replacement of biotite, probably in the presence of emanations from the rare earth-rich and thorium-rich Silver Plume Granite. The largest allanite crystals are made up of nearly isotropic (metamict) cores and birefringent (recrystallized) rims. Smaller crystals are made up exclusively of birefringent material. The maximum birefringence is shown to be that expectable in allanite of Late Cretaceous to early Tertiary age. As plotted on maps, the birefringence increases, and the thorium and uranium contents of the allanite decrease toward a Laramide stock. The variation in birefringence is, therefore, largely relatable to variations in the post-Laramide radiation dosage brought about by differences in the amounts of uranium and thorium lost during recrystallization. The recrystallized allanite is itself partly replaced by epidote which characteristically occurs as a border between allanite and biotite. Total rare-earth oxides for the eight samples of allanite analyzed range from 17.5 to 21.3 percent by weight. In 13 samples, thorium ranged from 0.50 to 1.14 percent by weight, and uranium from 54 to 158 parts pparts per million. Ranges in optical measurements for 20 samples using the spindle stage are: Nα = 1.719–1.759, Nβ = 1.731-1.774, N γ = 1.741–1.784, birefringence = 0.020–0.032, 2V X (calc.) 70°–84°. Ranges for unit-cell data obtained on 8 samples are: a = 8.948–8.985Å, b = 5.721-5.763Å, c = 10.184–10.240Å, β = 115°7.50′–115°25.89′ and volume = 473.02–478.43Å 3 . The average value for the ratio a:b:c = 1.561:1:1.778.

Colorado↗
USGS1966

Rhizoconcretions in vitric ash-fall tuff, Nye County, Nevada

Small, vertically elongate concretionlike structures, here called rhizoconcretions , are found in scattered localities in and near the southern part of the Belted Range of Nye County , Nevada . The rhizoconcretions occur within a stratigraphically restricted zone in bedded vitric ash - fall tuff of late Tertiary age. The rhizoconcretions differ in mineralogy from their host rock in that they are cemented by a binder of undetermined composition, possibly a zeolite, whereas the host tuffs are un-cemented. These structures appear to have formed during diagenesis of the tuff by means of capillary movement of subsurface waters that reacted with volcanic glass within the conduits to form the cementing material.

Nevada↗
USGS1971

Age and chemistry of tertiary volcanic rocks in north-central Arizona and relation of the rocks to the Colorado Plateaus

During late Miocene (14.8 m.y.) to early Pliocene (10.1 m.y.) time, local latite and widespread basaltic flows accumulated with associated continental sedimentary deposits in north-central Arizona. Some of these rocks were displaced and tilted by normal faults, and new drainage, now occupied in part by basalt flows of late Pliocene age (average 5 m.y., maximum of 6 m.y.), was established at the southern margin of the Colorado Plateaus. The time of faulting and uplift of the Colorado Plateaus in this region is thus bracketed between about 10.1 and 6 m.y. ago. Five analyzed basalts fall within the tholeiitic basalt field of the alkali-silica diagram and twenty are in the alkalic basalt field; in general, they are similar to other alkali-olivine basalts from the western United States.

Arizona↗
USGS2020

Liquefaction and related ground failure from July 2019 Ridgecrest earthquake sequence

The 2019 Ridgecrest earthquake sequence produced a 4 July M 6.5 foreshock and a 5 July M 7.1 mainshock, along with 23 events with magnitudes greater than 4.5 in the 24 hr period following the mainshock. The epicenters of the two principal events were located in the Indian Wells Valley, northwest of Searles Valley near the towns of Ridgecrest, Trona, and Argus. We describe observed liquefaction manifestations including sand boils, fissures, and lateral spreading features, as well as proximate non‐ground failure zones that resulted from the sequence. Expanding upon results initially presented in a report of the Geotechnical Extreme Events Reconnaissance Association, we synthesize results of field mapping, aerial imagery, and inferences of ground deformations from Synthetic Aperture Radar‐based damage proxy maps (DPMs). We document incidents of liquefaction, settlement, and lateral spreading in the Naval Air Weapons Station China Lake US military base and compare locations of these observations to pre‐ and postevent mapping of liquefaction hazards. We describe liquefaction and ground‐failure features in Trona and Argus, which produced lateral deformations and impacts on several single‐story masonry and wood frame buildings. Detailed maps showing zones with and without ground failure are provided for these towns, along with mapped ground deformations along transects. Finally, we describe incidents of massive liquefaction with related ground failures and proximate areas of similar geologic origin without ground failure in the Searles Lakebed. Observations in this region are consistent with surface change predicted by the DPM. In the same region, geospatial liquefaction hazard maps are effective at identifying broad percentages of land with liquefaction‐related damage. We anticipate that data presented in this article will be useful for future liquefaction susceptibility, triggering, and consequence studies being undertaken as part of the Next Generation Liquefaction project.

California↗
USGS1971

Sierra Nevada plutonic cycle: Part II, tidal energy and a hypothesis for orogenic-epeirogenic periodicities

The dissipative power of the solid earth tides is the order of 10 19 ergs/sec, or a few percent of terrestrial heat flow. It is proposed that this energy is concentrated along oceanic ridge systems and in the asthenosphere by mechanisms of viscous dissipation involving shear melting. Tidal energy localizes and sustains sources of sea-floor spreading through the melting mechanism, convection and magmatic transfer. Components of this energy enter the continent as magmatic heat either where ridge type sources and continents interact or where lateral motions induce shear zones and viscous dissipation within the continent. Temporal maxima of igneous intrusion into continental crust and related epeirogenic oscillations, spaced at intervals of about 30 m.y., are explained in terms of periodic thermal instabilities in the process of shear melting in the mantle. That is, maxima in rates of magma production in the mantle are relieved by vertical magmatic transfer. This process is coupled with lateral motions of the continent in a way analogous to episodic creep episodes of much shorter period in motions of active fault systems. Calculated periodicities are found to be simultaneously compatible with (l) the Sierra Nevada intrusive epochs of Part I, (2) oscillations in the eustatic curve during the Mesozoic Era, (3) concepts of sea-floor spreading, and (4) the magnitude of tidal power. More profound epeirogenic oscillations, having periods of about 200 m.y., are induced by variations in proportioning of tidal energy dissipation between the solid earth and the epicontinental seas. Thus, the tidal deformations of the earth provide information that leads to a general dynamic theory where magmatism, orogency, epeirogeny, sea-floor spreading and continent migration are systematically interrelated.

California↗
USGS1969

The relationship between fluids in some fresh alpine-type ultramafics and possible modern serpentinization, western United States

Calcium hydroxide waters issue from four partly serpentinized Alpine-type ultramafic bodies in the western United States. The occurrence of calcium-hydroxide-type water is restricted to fresh Alpine-type ultramafic rocks. The calcium hydroxide waters are unsaturated with Mg end-member olivine and pyroxene but supersaturated with Mg end-member brucite and serpentine and thus have chemical potentials to cause Serpentinization. The calcium hydroxide waters are isotopically similar to the common magnesium bicarbonate meteoric waters peculiar to ultramafic rocks and serpentinites. Some Serpentinization is apparently a near-surface phenomenon occurring at present. The Serpentinization takes place at nearly constant composition, except for loss of CaO. © 1969, The Geological Society of America, Inc.

Geological Society of America Bulletin↗