Search USGS⌕ Search

SEARCH · Search USGS

Results for “Coastal Sediments”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2011

A survey of alterations in microbial community diversity in marine sediments in response to oil from the Deepwater Horizon spill: Northern Gulf of Mexico shoreline, Texas to Florida

Microbial community genomic DNA was extracted from sediment samples collected from the northern Gulf of Mexico (NGOM) coast. These samples had a high probability of being impacted by Macondo-1 (M-1) well oil from the Deepwater Horizon (DWH) drilling site. The hypothesis for this project was that presence of M-1 oil in coastal sediments would significantly alter the diversity within the microbial communities associated with the impacted sediments. To determine if community-level changes did or did not occur following exposure to M-1 oil, microbial community-diversity fingerprints were generated and compared. Specific sequences within the community's genomic DNA were first amplified using the polymerase chain reaction (PCR) using a primer set that provides possible resolution to the species level. A second nested PCR that was performed on the primary PCR products using a primer set on which a GC-clamp was attached to one of the primers. These nested PCR products were separated using denaturing-gradient gel electrophoresis (DGGE) that resolves the nested PCR products based on sequence dissimilarities (or similarities), forming a genomic fingerprint of the microbial diversity within the respective samples. Sediment samples with similar fingerprints were grouped and compared to oil-fingerprint data from Rosenbauer and others (2010). The microbial community fingerprints grouped closely when identifying those sites that had been impacted by M-1 oil (N=12) and/or some mixture of M-1 and other oil (N=4), based upon the oil fingerprints. This report represents some of the first information on naturally occurring microbial communities in sediment from shorelines along the NGOM coast. These communities contain microbes capable of degrading oil and related hydrocarbons, making this information relevant to response and recovery of the NGOM from the DWH incident.

Gulf Of Mexico↗
USGS2011

Macondo-1 well oil in sediment and tarballs from the northern Gulf of Mexico shoreline

From April 20 through July 15, 2010, an estimated 4.4 million barrels (1 barrel = 42 gallons [~700,000 cu m]) of crude oil spilled into the northern Gulf of Mexico (nGOM) from the ruptured British Petroleum (BP) Macondo-1 (M-1) well after the explosion of the drilling platform Deepwater Horizon. In addition, ~1.84 million gallons (~7,000 cu m) of hydrocarbon-based Corexit dispersants were applied to the oil both on and below the sea surface (Operational Science Advisory Team, 2010). An estimate of the total extent of the surface oil slick, derived from wind, ocean currents, aerial photography, and satellite imagery, was 68,000 square miles (~180,000 sq km; Amos and Norse, 2010). Spilled oil from this event impacted sensitive habitat along the shores of the nGOM. In response to this environmental catastrophe, the U.S. Geological Survey (USGS) collected coastal sediment and tarball samples along the shores of the nGOM from Texas to Florida before and after oil made landfall. These sites included priority areas of the nGOM at highest risk for oil contamination. These areas included coastal wetlands, shorelines, and barrier islands that could suffer severe environmental damage if a significant amount of oil came ashore. Samples were collected before oil reached land from 69 sites; 49 were revisited to collect samples after oil landfall. This poster focuses on the samples from locations that were sampled on both occasions. The USGS samples and one M-1 well-oil sample provided by BP were analyzed for a suite of diagnostic geochemical biomarkers. Aided by multivariate statistical analysis, the M-1 well oil was not detected in the samples collected before landfall but have been identified in sediment and tarballs collected from Louisiana, Alabama, Mississippi, and Florida after landfall. None of the sediment hydrocarbon extracts from Texas correlated with the M-1 well oil. Oil-impacted sediment is confined to the shoreline adjacent to the cumulative oil slick of the Deepwater Horizon oil spill and no impact was observed outside of this area. Incorporation of the analytical data in geographical information systems (GIS) offers querying capabilities and visualizations such as those demonstrated here.

Open-File Report↗
USGS1994

Demethylation and cleavage of dimethylsulfoniopropionate in marine intertidal sediments

Demethylation and cleavage of dimethylsulfoniopropionate (DMSP) was measured in three different types of,intertidal marine sediments: a cyanobacterial mat, a diatom-covered tidal flat and a carbonate sediment. Consumption rates of added DMSP were highest in cyanobacterial mat slurries (59 ?? mol DMSP l-1 slurry h-1) and lower in slurries from a diatom mat and a carbonate tidal sediment (24 and 9 ??mol DMSP l-1 h-1, respectively). Dimethyl sulfide (DMS) and 3-mercaptopropionate (MPA) were produced simultaneously during DMSP consumption, indicating that cleavage and demethylation occurred at the same time. Viable counts of DMSP-utilizing bacteria revealed a population of 2 x 107 cells cm-3 sediment (90% of these cleaved DMSP to DMS, 10% demethylated DMSP to MPA) in the cyanobacterial mat, 7 x 105 cells cm-3 in the diatom mat (23% cleavers, 77% demethylators), and 9 x 104 cells cm-3 (20% cleavers and 80% demethylators) in the carbonate sediment. In slurries of the diatom mat, the rate of MPA production from added 3-methiolpropionate (MMPA) was 50% of the rate of MPA formation from DMSP. The presence of a large population of demethylating bacteria and the production of MPA from DMSP suggest that the demethylation pathway, in addition to cleavage, contributes significantly to DMSP consumption in coastal sediments.

FEMS Microbiology Ecology↗
USGS2021

Simulated global coastal ecosystem responses to a half-century increase in river nitrogen loads

Coastal ecosystems are increasingly threatened by anthropogenic stressors such as harmful algal blooms and hypoxia projected to intensify through the combined effects of eutrophication and warming. As a major terrestrial nitrogen (N) source to the ocean, rivers play a critical role in shaping both coastal and global biogeochemical cycling. Combining an enhanced-resolution (1/4°), global ocean physical-biogeochemical model with dynamic river inputs, we estimate that elevated river nitrogen loads alone resulted in an increase of 16.6 Tg (+5.8%) in the global coastal nitrogen inventory (CNI) over the half century between 1961 and 2010. This change was accompanied by increases in coastal net primary productivity (NPP, +4.6%) and benthic detrital flux (BDF, +7.3%), the latter of which is indicative of an overall higher oxygen demand in coastal sediments. After normalization by area, the ecosystems most sensitive to added river nitrogen (g N m-2 yr-1) were those with long residence times and strong nitrogen limitation. While even enhanced-resolution global models remain limited in their capacity to resolve near-shore responses, these basic sensitivity factors provide two relevant axes for frameworks assessing the comparative susceptibility of globally distributed coastal ecosystems to enhanced nitrogen loading, and the effectiveness of mitigation strategies.

Geophysical Research Letters↗
USGS2008

The A and m coefficients in the Bruun/Dean equilibrium profile equation seen from the Arctic

The Bruun/Dean relation between water depth and distance from the shore with a constant profile shape factor is widely used to describe shoreface profiles in temperate environments. However, it has been shown that the sediment scale parameter (A) and the profile shape factor (m) are interrelated variables. An analysis of 63 Arctic erosional shoreface profiles shows that both coefficients are highly variable. Relative frequency of the average m value is only 16% by the class width 0.1. No other m value frequency exceeds 21%. Therefore, there is insufficient reason to use average m to characterize Arctic shoreface profile shape. The shape of each profile has a definite combination of A and m values. Coefficients A and m show a distinct inverse relationship, as in temperate climate. A dependence of m values on coastal sediment grain size is seen, and m decreases with increasing grain size. With constant m = 0.67, parameter A obtains a dimension unit m1/3. But A equals the water depth in meters 1 m from the water edge. This fact and the variability of parameter m testify that the Bruun/Dean equation is essentially an empirical formula. There is no need to give any measurement unit to parameter A. But the International System of Units (SI) has to be used in applying the Bruun/Dean equation for shoreface profiles. A comparison of the shape of Arctic shoreface profiles with those of temperate environments shows surprising similarity. Therefore, the conclusions reached in this Arctic paper seem to apply also to temperate environments.

Journal of Coastal Research↗
USGS2025

Marine-sourced sediment supply supports salt marsh resilience to sea level rise in the Northeastern US

Salt marshes rely on sediment to maintain elevation and resist sea level rise (SLR). While riverine sediment is well studied, marine-sourced sediment remains understudied, particularly in regions with limited river input. We examined the influence of marine-sourced sediment on salt marsh stability across 103 sites in the Northeastern US, using a new satellite-derived suspended sediment concentration (SSC) product. Marsh vulnerability was assessed using the Unvegetated-to-Vegetated Ratio (UVVR) and relative marsh elevation (Z*). We identified two thresholds: SSC >20 mg/L and RSLR <5.2 mm/year. Marshes meeting either threshold tended to remain intact, while those with both low SSC and high RSLR were more vulnerable to degradation. A north–south gradient was observed, with most unstable marshes in the southern region, where SSC declined by 0.9% per decade on average, compared to 0.072% in the north. These findings highlight the need to include coastal sediment dynamics in restoration and adaptation planning.

Northeastern United States↗
USGS2000

Coastal erosion vs riverline sediment discharge in the Arctic shelfx seas

This article presents a comparison of sediment input by rivers and by coastal erosion into both the Laptev Sea and the Canadian Beaufort Sea (CBS). New data on coastal erosion in the Laptev Sea, which are based on field measurements and remote sensing information and existing data on coastal erosion in the CBS as well as riverine sediment discharge into both the Laptev Sea and the CBS are included. Strong regional differences in the percentages of coastal ero- sion and riverine sediment supply are observed. The CBS is dominated by the riverine sediment discharge (64.45x106 t a-1) mainly of the Mackenzie River. which is the largest single source of sediments in the Arctic. Riverine sediment discharge into the Laptev Sea amounts to 24.10x106 t a-1, more than 70% of which are related to the Lena River. In comparison with the CBS. the Laptev Sea coast on average delivers approximately twice as much sediment mass per kilometer, a result of higher erosion rates due to higher cliffs and seasonal ice melting. In the Laptev Sea sediment input by coastal erosion (58.4x106 t a-1) is therefore more important than in the CBS and the ratio between riverine and coastal sediment input amounts to 0.4. Coastal erosion supplying 5.6x106 t a-1 is less significant for the sediment budget of the CBS where riverine sediment discharge exceeds coastal sediment input by a factor of ca. 10.

International Journal of Earth Sciences↗
USGS2019

Variability in shelf sedimentation in response to fluvial sediment supply and coastal erosion over the past 1,000 years in Monterey Bay, CA, United States

Continental shelf environments are uniquely situated to capture some of the most dynamic processes on Earth including climatic variability and anthropogenic modifications to coastal systems. Understanding how these processes have affected sediment delivery and accumulation on the shelf in the past may provide insight into potential changes in the future. To address this, we investigated shelf sedimentation within Monterey Bay, California. Sediment cores were collected from four locations throughout the bay to capture both the modern and late Holocene sedimentological record using grain size analysis, and sediment chronologies determined from 210 Pb, 137 Cs, and 14 C. From the grain size results we focused on the total percent sand, and established a Littoral Sand Fraction (LSF) index to assess sediment contribution from the littoral zone as a result coastal erosion. Grain size results from the multicores consistently showed an increase in sand over the past several decades (post 1970s). For the cores located within the bay proximal to three major rivers, the increase in sand corresponded to a general increase in the LSF over the same period. We attributed these trends to increased sediment contributions to the shelf due to accelerated coastal erosion in the region. This accelerated coastal erosion was likely the combined result of dam construction in the mid-twentieth century that limited fluvial supply to the coast, and a shift in climate toward wetter, stormier period. Applying these sediment characteristics back over the past ∼1,000 years we found that dry climatic periods resulted in deposits that were limited in total sand but enriched in littoral material suggesting elevated coastal erosion. During wet periods deposits were enriched in total sand but limited in littoral sand suggesting elevated fluvial supply and low erosion. Compared to the late Holocene record, the previous several decades represent a shift to a new regime, uncharacteristic of deposits over the past millennia, highlighting the impact humans have had on shelf sedimentation.

California↗
USGS2020

Unifying advective and diffusive descriptions of bedform pumping in the benthic biolayer of streams

Many water quality and ecosystem functions performed by streams occur in the benthic biolayer, the biologically active upper (~5 cm) layer of the streambed. Solute transport through the benthic biolayer is facilitated by bedform pumping, a physical process in which dynamic and static pressure variations over the surface of stationary bedforms (e.g., ripples and dunes) drive flow across the sediment-water interface. In this paper we derive two predictive modeling frameworks, one advective and the other diffusive, for solute transport through the benthic biolayer by bedform pumping. Both frameworks closely reproduce patterns and rates of bedform pumping previously measured in the laboratory, provided that the diffusion model's dispersion coefficient declines exponentially with depth. They are also functionally equivalent, such that parameter sets inferred from the 2D advective model can be applied to the 1D diffusive model, and vice versa. The functional equivalence and complementary strengths of these two models expand the range of questions that can be answered, for example, by adopting the 2D advective model to study the effects of geomorphic processes (such as bedform adjustments to land use change) on flow-dependent processes and the 1D diffusive model to study problems where multiple transport mechanisms combine (such as bedform pumping and turbulent diffusion). By unifying 2D advective and 1D diffusive descriptions of bedform pumping, our analytical results provide a straightforward and computationally efficient approach for predicting, and better understanding, solute transport in the benthic biolayer of streams and coastal sediments.

Water Resources Research↗
USGS1985

Degradation of carbohydrates and lignins in buried woods

Spruce, alder, and oak woods deposited in coastal sediments were characterized versus their modern counterparts by quantification of individual neutral sugars and lignin-derived phenols as well as by scanning electron microscopy, 13 C NMR, and elemental analysis. The buried spruce wood from a 2500 yr old deposit was unaltered whereas an alder wood from the same horizon and an oak wood from an open ocean sediment were profoundly degraded. Individual sugar and lignin phenol analyses indicate that at least 90 and 98 wt% of the initial total polysaccharides in the buried alder and oak woods, respectively, have been degraded along with 15–25 wt% of the lignin. At least 75% of the degraded biopolymer has been physically lost from these samples. This evidence is supported by the SEM, 13 C NMR and elemental analyses, all of which indicate selective loss of the carbohydrate moiety. The following order of stability was observed for the major biochemical constituents of both buried hardwoods: vanillyl and p- hydroxyl "> p-hydroxyl lignin structural units > syringyl and lignin structural units > pectin > α-cellulose > hemicellulose. This sequence can be explained by selective preservation of the compound middle lamella regions of the wood cell walls. The magnitude and selectivity of the indicated diagenetic reactions are sufficient to cause major changes in the chemical compositions of wood-rich sedimentary organic mixtures and to provide a potentially large in situ nutrient source.

Geochimica et Cosmochimica Acta↗
USGS2011

A buoyant plume adjacent to a headland-Observations of the Elwha River plume

Small rivers commonly discharge into coastal settings with topographic complexities – such as headlands and islands – but these settings are underrepresented in river plume studies compared to more simplified, straight coasts. The Elwha River provides a unique opportunity to study the effects of coastal topography on a buoyant plume, because it discharges into the Strait of Juan de Fuca on the western side of its deltaic headland. Here we show that this headland induces flow separation and transient eddies in the tidally dominated currents (O(100 cm/s)), consistent with other headlands in oscillatory flow. These flow conditions are observed to strongly influence the buoyant river plume, as predicted by the “small-scale” or “narrow” dynamical classification using Garvine's (1995) system. Because of the transient eddies and the location of the river mouth on the headland, flow immediately offshore of the river mouth is directed eastward twice as frequently as it is westward. This results in a buoyant plume that is much more frequently “bent over” toward the east than the west. During bent over plume conditions, the plume was attached to the eastern shoreline while having a distinct, cuspate front along its westernmost boundary. The location of the front was found to be related to the magnitude and direction of local flow during the preceding O(1 h), and increases in alongshore flow resulted in deeper freshwater mixing, stronger baroclinic anomalies, and stronger hugging of the coast. During bent over plume conditions, we observed significant convergence of river plume water toward the frontal boundary within 1 km of the river mouth. These results show how coastal topography can strongly influence buoyant plume behavior, and they should assist with understanding of initial coastal sediment dispersal pathways from the Elwha River during a pending dam removal project.

Washington↗
USGS2014

Asphaltene content and composition as a measure of Deepwater Horizon oil spill losses within the first 80 days

The composition and content of asphaltenes in spilled and original wellhead oils from the Deepwater Horizon (DWH) incident provide information on the amount of original oil lost and the processes most responsible for the losses within the first 80 days of the active spill. Spilled oils were collected from open waters, coastal waters and coastal sediments during the incident. Asphaltenes are the most refractory component of crude oils but their alteration in the spilled oils during weathering prevents them from being used directly as a conservative component to calculate original oil losses. The alteration is reflected by their increase in oxygen content and depletion in 12 C. Reconnaissance experiments involving evaporation, photo-oxidation, microbial degradation, dissolution, dispersion and burning indicate that the combined effects of photo-oxidation and evaporation are responsible for these compositional changes. Based on measured losses and altered asphaltenes from these experiments, a mean of 61 ± 3 vol% of the original oil was lost from the surface spilled oils during the incident. This mean percentage of original oil loss is considerably larger than previous estimates of evaporative losses based on only gas chromatography (GC) amenable hydrocarbons (32–50 vol%), and highlights the importance of using asphaltenes, as well as GC amenable parameters in evaluating original oil losses and the processes responsible for the losses.

Gulf Of Mexico↗
USGS2009

Multi-segment earthquakes and tsunami potential of the Aleutian megathrust

Large to great earthquakes and related tsunamis generated on the Aleutian megathrust produce major hazards for both the area of rupture and heavily populated coastlines around much of the Pacific Ocean. Here we use paleoseismic records preserved in coastal sediments to investigate whether segment boundaries control the largest ruptures or whether in some seismic cycles segments combine to produce earthquakes greater than any observed since instrumented records began. Virtually the entire megathrust has ruptured since AD1900, with four different segments generating earthquakes >M8.0. The largest was the M9.2 great Alaska earthquake of March 1964 that ruptured ???800 km of the eastern segment of the megathrust. The tsunami generated caused fatalities in Alaska and along the coast as far south as California. East of the 1964 zone of deformation, the Yakutat microplate experienced two >M8.0 earthquakes, separated by a week, in September 1899. For the first time, we present evidence that earthquakes ???900 and ???1500 years ago simultaneously ruptured adjacent segments of the Aleutian megathrust and the Yakutat microplate, with a combined area ???15% greater than 1964, giving an earthquake of greater magnitude and increased tsunamigenic potential. ?? 2008 Elsevier Ltd. All rights reserved.

Quaternary Science Reviews↗
USGS2024

A comprehensive assessment of submarine landslides and mass wasting processes offshore southern California

It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high-resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States-Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide-related features, including 63 discrete slide deposits with debris and >1,400 slide-related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km 2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea-level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low-gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small-scale failures on tectonically steepened slopes.

California↗
USGS2018

Paleocene–Eocene Thermal Maximum prolonged by fossil carbon oxidation

A hallmark of the rapid and massive release of carbon during the Palaeocene–Eocene Thermal Maximum is the global negative carbon isotope excursion. The delayed recovery of the carbon isotope excursion, however, indicates that CO 2 inputs continued well after the initial rapid onset, although there is no consensus about the source of this secondary carbon. Here we suggest this secondary input might have derived partly from the oxidation of remobilized sedimentary fossil carbon. We measured the biomarker indicators of thermal maturation in shelf records from the US Mid-Atlantic coast, constructed biomarker mixing models to constrain the amount of fossil carbon in US Mid-Atlantic and Tanzania coastal records, estimated the fossil carbon accumulation rate in coastal sediments and determined the range of global CO 2 release from fossil carbon reservoirs. This work provides evidence for an order of magnitude increase in fossil carbon delivery to the oceans that began ~10–20 kyr after the event onset and demonstrates that the oxidation of remobilized fossil carbon released between 10 2 and 10 4 PgC as CO 2 during the body of the Palaeocene–Eocene Thermal Maximum. The estimated mass is sufficient to have sustained the elevated atmospheric CO 2 levels required by the prolonged global carbon isotope excursion. Even after considering uncertainties in the sedimentation rates, these results indicate that the enhanced erosion, mobilization and oxidation of ancient sedimentary carbon contributed to the delayed recovery of the climate system for many thousands of years.

Nature Geoscience↗
USGS2004

Novel geophysical and geochemical techniques used to study submarine groundwater discharge in Biscayne Bay, Florida

Introduction Submarine groundwater discharge (SGD) is a problem of major proportions on a world-wide scale. The ubiquitous nature of SGD along varied coastlines and its importance to coastal water and geochemical budgets have recently been thrust into the global spotlight . For example, the discharge of nutrient-enriched groundwater into coastal waters may cause nutrient imbalances that can lead to eutrophication or near-shore micro-organism blooms . Similarly, SGD can also directly affect threatened coastal freshwater resources and impact fragile coastal ecosystems, such as coral reefs. Recently, much effort has been devoted to developing and adapting new tracer techniques and methods for the identification and quantification of SGD. As the discharge of coastal groundwater most often occurs as diffuse seepage rather than through a single vent feature, assessing SGD has remained difficult for both oceanographers and hydrologists alike. Burnett and colleagues have developed a systematic approach to investigate SGD by using a combination of both physical seepage measurements and a suite of naturally occurring isotopic tracers in the U/Th decay chain – 222 Rn and 223,224,226,228 Ra. Manheim et al. further extended SGD investigations by adapting geophysical resistivity techniques to examine fine-scale change in conductivity fields within coastal sediments. Such streaming resistivity profiling has been successfully applied to identify sites of SGD, as well as the dynamic position of the fresh water/saltwater interface.

Florida↗
USGS2022

Compilation of existing data for sand resource studies in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California—Strategy for field studies and sand resource assessment

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. This report addresses the initial stage, which is a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This report provides a description of the methods and results of this synthesis. The findings from this work were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project, the results of which will be published separately, will be the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores within the three study areas. The data collected will provide new information about the three study areas including sediment thickness, grain-size distributions, and total organic carbon. The description and results of stage two of the work is included in another USGS report (Warrick and others, 2022).

California↗
USGS1996

Numerical Analysis of Ground-Water Flow and Salinity in the Ewa Area, Oahu, Hawaii

The coastal plain in the Ewa area of southwestern Oahu, Hawaii, is part of a larger, nearly continuous sedimentary coastal plain along Oahu's southern coast. The coastal sediments are collectively known as caprock because they impede the free discharge of ground water from the underlying volcanic aquifers. The caprock is a layered sedimentary system consisting of interbedded marine and terrestrial sediments of both high and low permeability. Before sugarcane cultivation ended in late 1994, shallow ground water from the upper limestone unit, which is about 60 to 200 feet thick, was used primarily for irrigation of sugarcane. A cross-sectional ground-water flow and transport model was used to evaluate the hydrogeologic controls on the regional flow system in the Ewa area. Controls considered were: (1) overall caprock hydraulic conductivity, (2) stratigraphic variations of hydraulic conductivity in the caprock, and (3) recharge. In addition, the effects of a marina excavation were evaluated. Within the caprock, variations in hydraulic conductivity, caused by caprock stratigraphy or discontinuities of the stratigraphic units, are a major control on the direction of ground-water flow and the distribution of water levels and salinity. Model results also show that a reduction of recharge will result in increased salinity throughout the caprock with the greatest change in the upper limestone layer. In addition, the model indicates that excavation of an ocean marina will lower water levels in the upper limestone layer. Results of cross-sectional modeling confirm the general ground-water flow pattern that would be expected in the layered sedimentary system in the Ewa caprock. Ground-water flow is: (1) predominantly upward in the low-permeability sedimentary units, and (2) predominantly horizontal in the high-permeability sedimentary units.

Open-File Report↗