Search USGS⌕ Search

SEARCH · Search USGS

Results for “Coal Preparation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

106 records · Page 6Linked to original sources
USGS2021

An assessment of the economic potential of lignite and leonardite resources in the Williston Basin, North Dakota

The Bureau of Land Management (BLM) requested assistance from the U.S. Geological Survey (USGS) to conduct an assessment study to identify areas that may have economic potential for the future extraction of lignite and leonardite resources in the Williston Basin in North Dakota. The study will be used by the BLM to assist with the preparation of a revised resource management plan for the Williston Basin, in accordance with BLM planning policies. The assessment of the economic potential of lignite resources required the establishment of criteria defining an economic lignite deposit. In consultation with the BLM, criteria were established to delineate drill holes that contained economic lignite beds. The criteria established are a minimum lignite bed thickness, a minimum cumulative lignite thickness, a maximum cumulative stripping ratio, and a maximum overburden. Likewise, an assessment of the economic potential of leonardite deposits required the establishment of criteria delineating drill holes that contained economic leonardite deposits. The criteria established are a minimum leonardite bed thickness, a minimum cumulative leonardite thickness, and a maximum overburden. The drill hole data utilized in this study were obtained from the National Coal Resources Data System database and from several coal companies. Data from more than 20,000 drill holes, both proprietary and nonproprietary, were used to compile areas of economic potential for lignite or leonardite. Areas delineated as having lignite or leonardite resources with economic potential, based on the established criteria, were present in 24 counties in the western portion of North Dakota. Areas of economic potential were delineated using a visual best-fit method without croplines. Areas defined as having economic potential for certain lignite beds or leonardite deposits may extend beyond known croplines in this study. Stratigraphically, the lignite and leonardite deposits in the Williston Basin in North Dakota are mostly found in the Paleocene Fort Union Formation. Thick (greater than 20 feet) and laterally extensive (greater than 5 square miles) lignite beds are present in the Fort Union Formation throughout the Sentinel Butte and Tongue River Members. Lignite beds are also present in the Ludlow Member of the Fort Union Formation, although they are not as numerous or thick as they are in the overlying Sentinel Butte and Tongue River Members. As a result of lateral facies changes and migrating fluvial channel complexes in the Fort Union Formation, lignite beds of varying thickness occupy different stratigraphic horizons vertically throughout the Williston Basin. The calculation of volumes for lignite and leonardite resources was not part of the scope of this study requested by the BLM, but a future study by the USGS may involve a comprehensive assessment of lignite resources and reserves in the Williston Basin. This future study could combine geologic data compiled in this study with geologic data from a previously unpublished 2019 assessment study by the USGS in the Williston Basin in eastern Montana. This future USGS study could also include the calculation of volumes for lignite resources and reserves, based on economic models derived using analogs from active mining operations in the Williston Basin and available spot market or contract coal prices.

North Dakota↗
USGS2014

The environmental and medical geochemistry of potentially hazardous materials produced by disasters

Many natural or human-caused disasters release potentially hazardous materials (HM) that may pose threats to the environment and health of exposed humans, wildlife, and livestock. This chapter summarizes the environmentally and toxicologically significant physical, mineralogical, and geochemical characteristics of materials produced by a wide variety of recent disasters, such as volcanic eruptions, hurricanes and extreme storms, spills of mining/mineral-processing wastes or coal extraction by-products, and the 2001 attacks on and collapse of the World Trade Center towers. In describing these characteristics, this chapter also illustrates the important roles that geochemists and other earth scientists can play in environmental disaster response and preparedness. In addition to characterizing in detail the physical, chemical, and microbial makeup of HM generated by the disasters, these roles also include (1) identifying and discriminating potential multiple sources of the materials; (2) monitoring, mapping, and modeling dispersal and evolution of the materials in the environment; (3) understanding how the materials are modified by environmental processes; (4) identifying key characteristics and processes that influence the materials' toxicity to exposed humans and ecosystems; (5) estimating shifts away from predisaster environmental baseline conditions; and (6) using geochemical insights learned from past disasters to help estimate, prepare for, and increase societal resilience to the environmental and related health impacts of future disasters.

Book chapter↗
USGS1980

The river and the rocks: The geologic story of Great Falls and the Potomac River Gorge

The Great Falls of the Potomac River has figured prominently in the purposes of men since prehistoric time. Long before John Smith reached the falls in 1609, groups of Indians from East and West met at this great river barrier to trade and perform ceremonies in honor of the spirit of the "Roaring Waters". As early as 1754, George Washington visualized the Potomac River as an important avenue of trade and communication with the interior. Records show that with the exception of Mount Vernon, Great Falls was perhaps as intimately associated with George Washington's everyday life as any other place in the country. As first President of the "Patowmack Canal Company," Washington frequently visited the working parties as they constructed the canal and lock system which skirted the treacherous falls on the Virginia side. Matildaville, a town of about 40 acres named after the wife of "Light Horse" Harry Lee and consisting of various dwellings, grist mill, market house, forge, sawmill, and tavern, sprang up along the banks of the canal. In 1802, the Patowmack Company canals were essentially completed, and hundreds of boats plied the river, bringing corn and wheat, coal and limestone, flaxseed and furs downstream from the mountainous region of Cumberland. Many of the boats were sold for lumber in Georgetown, thus sparing the boatmen an arduous upstream journey. After the establishment of the Nation's Capital, Great Falls became a popular scenic attraction for residents and visitors alike. But Great Falls was not always so easily accessible as it is today. In 1845, a newspaper columnist, after praising the beauty and historic interest of the region, added, "... the access to this interesting spot is, on both sides of the river, by the most infamous of roads and the accommodations for visitors anything but what they ought to be!" Visitors to Great Falls now number close to a half million annually and, because of this continuing and mounting interest, the U.S. Geological Survey has joined with the National Park Service in preparing this booklet for better understanding and enjoyment of the Great Falls of the Potomac River.

Maryland, Virginia↗
USGS2018

On the petrographic distinction of bituminite from solid bitumen in immature to early mature source rocks

The oil-prone maceral bituminite (and its equivalents: ‘amorphous organic matter’, ‘sapropelinite’, ‘amorphinite’, etc.) converts to petroleum during thermal maturation of source rocks, resulting in formation of a mobile saturate-rich hydrocarbon and a polar-rich residue of solid bitumen. Evidence of this transition is preserved in immature to early mature source rocks (e.g., Alum, Bakken, Kimmeridge, New Albany, Ohio shales, among many others), where organic petrography reveals a continuum of textures, reflectance, and fluorescence intensity occurring between bituminite and solid bitumen. Bituminite generally is characterized by high(er) intensity fluorescence, low contrast to the inorganic matrix, lower reflectance (compared to solid bitumen), and heterogeneous wispy or ‘schlieren’ textures. In comparison, solid bitumen generally shows lower intensity or no fluorescence compared to bituminite, a distinct contrast to the mineral matrix which usually includes a gray homogeneous surface of low to moderate reflectance, and may possess void-filling, embayment or groundmass textures suggesting evidence of migration or its in situ exsolution. However, these properties may manifest across a continuous spectrum in a sample or in a single microscope field, often making identification inconclusive. Unambiguous identification is further hampered by sample preparation, e.g., mechanical polish may improve homogeneity of larger accumulations, whereas smaller accumulations, or those sheltered by hard minerals, may appear more heterogeneous, leading to identification of the same organic matter as solid bitumen or bituminite, respectively. The disruptive innovation of ion milling in shale sample preparation leads to increased organic reflectance and surface homogeneity, causing bituminite and other oil-prone macerals, e.g., alginite, to develop a gray reflecting surface which is easy to confuse with solid bitumen, especially when obvious void-filling or embayment textures of the latter are absent. Herein we review distinction of solid bitumen from bituminite and alginite in immature to early mature source rocks, providing examples from nine samples illustrated by typical organic petrography images, including samples from hydrous pyrolysis experiments. Based on a review of the literature, we observe an arbitrary reflectance limit of 0.30% in mechanically polished samples seems to differentiate bituminite (<0.30%) from confident identifications of homogeneous solid bitumen (which otherwise lacks obvious void-filling or identifying embayment textures) as individual macerals on a continuous spectrum in immature and early mature source rocks. Future work conducted by governing bodies such as the International Committee for Coal and Organic Petrology (ICCP) should consider interlaboratory studies conducted on multiple immature source rock samples to develop consensus guidelines for bituminite and solid bitumen discrimination.

International Journal of Coal Geology↗
USGS2003

Preparing for climate change: The potential consequences of climate variability and change

Over the past decades, scientific research has greatly advanced the knowledge and understanding of global environmental change. Research supported by the U. S. Global Change Research Programme (USGCRP) and research and assessment results by international organizations such as the Intergovernmental Panel on Climate Change (IPCC), the World Climate Research Program (WCRP), and the International Geosphere and Biosphere Programme (IGBP) have demonstrated that human activities exert powerful environmental influences on global, regional, and local scales. Recent findings by the Intergovernmental Panel on Climate Change (IPCC, 1997) indicate that human activities are increasing the atmospheric concentrations of carbon dioxide (CO 2 ) and other greenhouse gases such as nitrous oxide (NO x ), methane (CH 4 ), chlorofluorocarbons (CFCS), partially halogenated fluorocarbons, and ozone (O 3 ), which alter radiative balances, and tend to warm the Earth’s surface. These changes in greenhouse gases and aerosols constitute key factors in global and regional changes in temperature, precipitation, and other climate variables, resulting in local and regional changes in soil moisture, an increase in global mean sea level, and prospects for more severe extreme high temperature events, floods, and droughts in some places. In the United States and elsewhere in the industrialized world, energy use contributes to global warming more than any other human activity. This is because most of our energy comes from carbon-based fossil fuels (coal, oil, and natural gas). Fossil fuels provide energy for a variety of purposes, including transporting goods and people, manufacturing products, heating and cooling buildings, lighting spaces, and cooking foods. Each year U.S. energy use releases more than 5.5 billion tons of carbon dioxide into the atmosphere. Present global CO2 concentrations in the atmosphere are 130% of pre-industrial levels (Figure 1). The global surface temperature last century is warmer than any other century in the past millennium. The global average temperature has increased by about 1 o F over the last century and is projected to rise another 2-6.5 o F by year 2100 (Figure 2). The last two decades have been the warmest last century. Average global sea level has risen about 4 to 10 inches in the last hundred years, and is projected to rise another 6-38 inches by year 2100. Mid- and low- latitude mountain glaciers have retreated world-wide last century. As greenhouse gases continue to accumulate in the atmosphere, it is expected that an increase in rainfall amount and consequent increase in river flooding will occur. Recent floods in the Gulf Coast areas (1993, 1997) are examples of such events, and perhaps indicate the high sensitivity of flood occurrence to changing climate. Because of its unique location adjacent to the Gulf of Mexico, the Gulf Coast region of the United States is particularly vulnerable to various environmental alterations resulting from climate change.

Alabama, Florida, Georgia, Louisiana, Mississippi,↗
USGS1989

Suspended-sediment yields from an unmined area and from mined areas before and after reclamation in Pennsylvania, June 1978-September 1983

The U.S. Geological Survey, in cooperation with the Pennsylvania Department of Environmental Resources, has collected hydrologic data from areas in Tioga, Clearfield, and Fayette Counties to determine the effects of surface coal mining on sediment yields. The data were collected from June 1978 through September 1983. Rainfall, streamflow and suspended-sediment data were collected with automatic recording and sampling equipment. Data were collected in Tioga County from an agricultural area that was unaffected by mining and from a forested area prior to surface mining. Data were collected from two areas affected by active surface mining in Tioga County and from an area in Clearfield County being mined by the contour-surface method. Data also were collected from three areas, Tioga, Clearfield, and Fayette Counties, during and after reclamation. The efficiencies of sediment-control pounds in Clearfield and Fayette Counties also were determined. The average annual sediment yield from the agricultural area in Tioga County, which was 35 percent forested, was 0.48 ton per acre per year, and the yield from the forested area prior to mining was 0.0036 ton per acre per year. The average annual sediment yields from the areas affected by active surface mining were 22 tons per acre from the improved haul road and 148 tons per acre from the unimproved haul road. The average annual sediment yield from the site in Clearfield County that had been prepared for mining was 6.3 tons per acre. The average annual sediment yield from the same site while it was being mined by the contour method was 5.5 tons per acre per year. The sediment-control pond reduced the average annual sediment yield to 0.50 ton per acre while the site was prepared for mining and to 0.14 ton per acre while the site was being mined. Because the active surface mining reduced the effective drainage area to the pond, the sediment yield decreased from 0.50 to 0.14 ton per acre. Average annual suspended-sediment yields from the reclaimed site in Tioga County were 1.0 ton per acre during the first year, when vegetation was becoming established, and 0.037 ton per acre during the second year, when vegetation was well established. The average annual sediment yield below a 21.2-acre, reclaimed, surface mine in Clearfield County that had been mined by the contour method was 15 tons per acre during the first year when vegetation was becoming established. However, the average annual sediment yield below a sediment-control pond at this reclaimed site in Clearfield County was 0.30 ton per acre. Data collected from a 4.2-acre reclaimed area that had been surface mined by the block-cut method in Fayette County showed that annual sediment yields from the area were 77 tons per acre in 1981 (no vegetation), 32 tons per acre in 1982 (sparse vegetation), and 1.0 ton per acre in 1983 (well-esatablished vegetation). The average annual yield below a sediment-control pond at the mine site in Fayette County was 0.19 ton per acre during the 27 months of data collection.

Water-Resources Investigations Report↗
USGS1991

A method for the concentration of fine-grained rutile (TiO2) from sediment and sedimentary rocks by chemical leaching

Quaternary marine sediment in the Gulf of Maine basins contains 0.7 to 1.0 wt percent TiO 2 (determined by X-ray fluorescence spectrometry). Most of this TiO 2 exists in the form of silt-size rutile crystals that are visible by using the petrographic microscope with transmitted light (Valentine and Commeau, 1990). The identification of rutile was confirmed by using a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS) system. To quantify the amount of TiO 2 in the sediment contributed by rutile and its polymorphs, anatase and brookite, it was necessary to eliminate as many of the other minerals as possible, especially titanium-bearing minerals such as ilmenite, ilmenomagnetite, biotite, hornblende, oyroxene, and sphene. We accomplished this by developing a method of chemical dissolution that removed the bulk of the raw material and left the TiO 2 minerals intact. Many methods using acids and bases have been developed over the years to dissolve rocks, minerals, and sediments for chemical analysis or to concentrate specific minerals (Dolcater et al., 1970; Church, 1971; Campbell, 1973, and the references cited therein). The method developed by Raman and Jackson (1965) to concentrate rutile and anatase in soils and sediments requires digesting the sample in concentrated hydrofluoric acid (HF) for 24 hours. However, Campbell (1973) found that digestion in HF for more than 2 hours results in a loss of anatase. The method of Dolcater et al. (1970) for concentrating titanium as a free oxide requires the use of hydrofluotitanic acid (H 2 TiF 6 ), which is difficult to find on the commercial market. The acid can be prepared by the reaction of concentrated HF (48%) with an excess of TiO 2 , but the procedure requires 36 hours to complete and should be attempted with caution because it is highly exothermic. Jackson (1979) provides a detailed method for digesting soils, but many of the recommended pretreatment steps employ sodium compounds such as sodium bicarbonate (NaHCO 3 ), sodium citrate (Na 3 C 6 H 5 O 7 -2H 2 O), and sodium dithionate (Na 2 S 2 O 4 ), which are used for the removal of calcium carbonate, iron oxides, and phosphates. In combining the methods of Dolcater and Jackson, sodium compounds must be thoroughly washed from the sample because they form sodium fluotitanate (Na 2 TiF 6 ) in the presence of hydrofluotitanic acid (Fig. 1K). French and Adams (1973) described an inexpensive method for decomposing silicates by HF digestion in polypropylene containers. Their technique was effective for a wide variety of rock types. However, it did not address the problem caused by the precipitation of insoluble fluorides, nor did it outline a procedure to concentrate any residue that remained. As no one method gave the results we required, we modified procedures described in the literature and developed a process that removes 96 to 98 wt percent of the raw sample material. The residue is composed of rutile and minor amounts of micro- and cryptocrystalline TiO 2 (Fig. 1A-J), barite (Fig. 1L), elemental carbon (coal), and insoluble fluorides (Fig. 1J). The fluorides precipitate during the decomposition of siliceous material in hydrofluoric acid (e.g., MgF 2 and MgAlF 5 -2.7H 2 O; Lanmyhr and Kringstad, 1966). Most of the sample analyzed by the method described were marine muds collected from the Gulf of Maine (Valentine and Commeau, 1990). The silt and clay fraction (up to 99 wt% of the sediment) is composed of clay minerals (chiefly illite-mica and chlorite), silt-size quartz and feldspar, and small crystals (2-12 um) of rutile and hematite. The bulk sediment samples contained an average of 2 to 3 wt percent CaCO 3 . Tiher samples analyzed include red and gray Carboniferous and Triassic sandstones and siltstones exposed around the Bay of Fundy region and Paleozoic sandstones, siltstones, and shales from northern Maine and New Brunswick. These rocks are probable sources for the fine-grained rutile found in the Gulf of Maine.

Economic Geology↗
USGS2024

Surface area of montmorillonite from the dynamic sorption of nitrogen and carbon dioxide

Surface area determinations were made on a montmorillonite with various cations emplaced on the exchangeable sites, utilizing nitrogen and carbon dioxide as adsorbates at 77 ° K and 195 ° K, respectively, in a dynamic system. From the fraction of a Mississippi montmorillonite less than about 1 μ in size, samples were prepared by replacing the original exchangeable cations with Li + , Na + , K + , Rb + , Cs + , Mg ++ , Ca ++ , Ba ++ , and NH 4 + , forming a series of homoionic montmorillonite species. Surface areas from 3-point B.E.T. plots (half-hour adsorption points), with nitrogen as the adsorbate, ranged from 61 m 2 /g for Li-montmorillonite to 138 m 2 /g for Cs-montmorillonite, thus reflecting a certain degree of nitrogen penetration between layers. Complete penetration should theoretically result in a surface area of over 300 m 2 /g for this clay with a nitrogen monolayer between each pair of platelets. The experimental data indicate that the extent of penetration is time-dependent and is also a function of the interlayer forces as governed by the size and charge of the replaceable cation. This finding negates the generally accepted concept that nitrogen at 77 ° K does not penetrate the layers and provides a measure only of the external surface of expandable clay minerals. A further measure of the variation of interlayer forces is provided by the adsorption of carbon dioxide at 195 ° K. Surface area values ranged from 99 m 2 /g for Li-montmorillonite to 315 m 2 /g for Csmontmorillonite. Although the carbon dioxide molecule is larger than the nitrogen molecule, its greater penetration apparently is a result of its being kinetically more energetic (with a larger diffusion coefficient) at its higher adsorption temperature. Similar differences have been found with both adsorbates in the study of microporous substances, such as coal, where activated diffusion is of considerable significance.

Clays and Clay Minerals↗
USGS1998

Relative importance of physical and economic factors in Appalachian coalbed gas assessment

In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.

International Journal of Coal Geology↗
USGS2014

Inference of strata separation and gas emission paths in longwall overburden using continuous wavelet transform of well logs and geostatistical simulation

Prediction of potential methane emission pathways from various sources into active mine workings or sealed gobs from longwall overburden is important for controlling methane and for improving mining safety. The aim of this paper is to infer strata separation intervals and thus gas emission pathways from standard well log data. The proposed technique was applied to well logs acquired through the Mary Lee/Blue Creek coal seam of the Upper Pottsville Formation in the Black Warrior Basin, Alabama, using well logs from a series of boreholes aligned along a nearly linear profile. For this purpose, continuous wavelet transform (CWT) of digitized gamma well logs was performed by using Mexican hat and Morlet, as the mother wavelets, to identify potential discontinuities in the signal. Pointwise Hölder exponents (PHE) of gamma logs were also computed using the generalized quadratic variations (GQV) method to identify the location and strength of singularities of well log signals as a complementary analysis. PHEs and wavelet coefficients were analyzed to find the locations of singularities along the logs. Using the well logs in this study, locations of predicted singularities were used as indicators in single normal equation simulation (SNESIM) to generate equi-probable realizations of potential strata separation intervals. Horizontal and vertical variograms of realizations were then analyzed and compared with those of indicator data and training image (TI) data using the Kruskal–Wallis test. A sum of squared differences was employed to select the most probable realization representing the locations of potential strata separations and methane flow paths. Results indicated that singularities located in well log signals reliably correlated with strata transitions or discontinuities within the strata. Geostatistical simulation of these discontinuities provided information about the location and extents of the continuous channels that may form during mining. If there is a gas source within their zone of influence, paths may develop and allow methane movement towards sealed or active gobs under pressure differentials. Knowledge gained from this research will better prepare mine operations for potential methane inflows, thus improving mine safety.

Journal of Applied Geophysics↗
USGS2020

Investigating the effects of broad ion beam milling to sedimentary organic matter: Surface flattening or heat-induced aromatization and condensation?

Previous work has proposed transfer of kinetic heat energy from low-energy broad ion beam (BIB) milling causes thermal alteration of sedimentary organic matter, resulting in increases of organic matter reflectance. Whereas, other studies have suggested the organic matter reflectance increase from BIB milling is due to decreased surface roughness. To test if reflectance increases to sedimentary organic matter (vitrinite) caused by BIB milling were related to molecular aromatization and condensation, Raman and Fourier transform infrared (FTIR) spectroscopies were used to evaluate potential compositional changes in the same vitrinite locations pre- and post-BIB milling. The same locations also were examined by atomic force microscopy (AFM) to determine topographic changes caused by BIB milling (as quantified by the areal root-mean-square roughness parameter S q ). Samples consisted of four medium volatile bituminous coals. A non-aggressive BIB milling approach was used with conditions of 5 min, 4 keV, 15°incline, 360° rotation at 25 rpm and 100% focus (1.5 kV discharge; ∼100 μA). This gentle BIB milling caused vitrinite reflectance (VR o ) increases of 12 to 36% of the original values determined optically before milling (average 26% increase). When molecular proxies from FTIR (A- and C-factor, branching ratio) were plotted against each other for the same vitrinite locations pre- and post-milling, mean data points for each sample generally lie within error of a 1:1 line. Likewise, mean Raman thermal proxy [full-width half maximum of G-band (G-FWHM), Raman band separation (RBS) and D1/G band intensity ratio] values were similar for pre- and post-milled locations, also plotting within error of a 1:1 line. AFM confirms the majority (24 of 36) of pre- and post-ion milled surface pairs were smoother (lower S q values) after BIB milling. These results are interpreted to indicate VR o increase induced by the gentle BIB milling conditions used in this study is an effect of decreased diffuse reflectance due to flatter surfaces, causing more photons to reflect directly back to the detector. Little evidence was observed for molecular aromatization and condensation of vitrinite molecules following BIB milling (with the conditions used). The presence of milling-induced artifacts, including differential milling effects dependent on location and the development of self-organized patterned structures, indicate much work remains in standardization of BIB milling before its promulgation as a routine sample preparation technique for organic petrography. These results provide better understanding of anthropogenic-induced changes to geological samples caused by the now widespread adoption of BIB milling as a disruptive innovation in sample preparation.

Fuel↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗
USGS2021

A review of spatially resolved techniques and applications of organic petrography in shale petroleum systems

This review examines new techniques and applications of organic petrography in source-rock reservoir petroleum systems that have occurred along with development of the global ‘shale revolution’ in energy resources. The review is limited to techniques and instrumentation that provide spatially resolved information, typically at or below microscales, for dispersed organic matter occurring in situ in samples of shale and mudrock. A brief summary of ion beam sample preparation is followed by discussion of the most common analytical techniques and applications. Advantages and limitations of each technique, including requisite sample preparation, types of information generated [e.g., molecular or elemental (isotopic) abundance], sensitivity, and resolution are discussed. In a few cases, techniques not yet applied to organic petrology of shale or mudrock are described (e.g., X-ray photoelectron spectroscopy imaging), in anticipation of near-term future application. The most common in situ techniques applied for characterization of organic matter in shale and mudrock include optical (including fluorescence) and electron microscopies, Raman, fluorescence, and infrared spectroscopies, and surficial measurements via force microscopy. Techniques that show growing application to organic petrography of shale include tip-enhanced photothermal infrared spectroscopy, mass spectrometry imaging, and synchrotron-based spectroscopies, among others. It is anticipated that the future of dispersed organic matter petrography will hold continued development of integrated instrument techniques (e.g., simultaneous or sequential correlative microscopies and/or spectroscopies of the same location), increased instrumental resolution, increased use of multiscale and multimodal organic petrography investigations, and three-dimensional imaging and chemical speciation mapping applications via multiple analytical approaches.

International Journal of Coal Geology↗
USGS2011

Water budgets and groundwater volumes for abandoned underground mines in the Western Middle Anthracite Coalfield, Schuylkill, Columbia, and Northumberland Counties, Pennsylvania: Preliminary estimates with identification of data needs

This report, prepared in cooperation with the Pennsylvania Department of Environmental Protection (PaDEP), the Eastern Pennsylvania Coalition for Abandoned Mine Reclamation, and the Dauphin County Conservation District, provides estimates of water budgets and groundwater volumes stored in abandoned underground mines in the Western Middle Anthracite Coalfield, which encompasses an area of 120 square miles in eastern Pennsylvania. The estimates are based on preliminary simulations using a groundwater-flow model and an associated geographic information system that integrates data on the mining features, hydrogeology, and streamflow in the study area. The Mahanoy and Shamokin Creek Basins were the focus of the study because these basins exhibit extensive hydrologic effects and water-quality degradation from the abandoned mines in their headwaters in the Western Middle Anthracite Coalfield. Proposed groundwater withdrawals from the flooded parts of the mines and stream-channel modifications in selected areas have the potential for altering the distribution of groundwater and the interaction between the groundwater and streams in the area. Preliminary three-dimensional, steady-state simulations of groundwater flow by the use of MODFLOW are presented to summarize information on the exchange of groundwater among adjacent mines and to help guide the management of ongoing data collection, reclamation activities, and water-use planning. The conceptual model includes high-permeability mine voids that are connected vertically and horizontally within multicolliery units (MCUs). MCUs were identified on the basis of mine maps, locations of mine discharges, and groundwater levels in the mines measured by PaDEP. The locations and integrity of mine barriers were determined from mine maps and groundwater levels. The permeability of intact barriers is low, reflecting the hydraulic characteristics of unmined host rock and coal. A steady-state model was calibrated to measured groundwater levels and stream base flow, the latter at many locations composed primarily of discharge from mines. Automatic parameter estimation used MODFLOW-2000 with manual adjustments to constrain parameter values to realistic ranges. The calibrated model supports the conceptual model of high-permeability MCUs separated by low-permeability barriers and streamflow losses and gains associated with mine infiltration and discharge. The simulated groundwater levels illustrate low groundwater gradients within an MCU and abrupt changes in water levels between MCUs. The preliminary model results indicate that the primary result of increased pumping from the mine would be reduced discharge from the mine to streams near the pumping wells. The intact barriers limit the spatial extent of mine dewatering. Considering the simulated groundwater levels, depth of mining, and assumed bulk porosity of 11 or 40 percent for the mined seams, the water volume in storage in the mines of the Western Middle Anthracite Coalfield was estimated to range from 60 to 220 billion gallons, respectively. Details of the groundwater-level distribution and the rates of some mine discharges are not simulated well using the preliminary model. Use of the model results should be limited to evaluation of the conceptual model and its simulation using porous-media flow methods, overall water budgets for the Western Middle Anthracite Coalfield, and approximate storage volumes. Model results should not be considered accurate for detailed simulation of flow within a single MCU or individual flooded mine. Although improvements in the model calibration were possible by introducing spatial variability in permeability parameters and adjusting barrier properties, more detailed parameterizations have increased uncertainty because of the limited data set. The preliminary identification of data needs includes continuous streamflow, mine discharge rate, and groundwater levels in the mines and adjacent areas. Data collected whe

Pennsylvania↗
USGS1983

Hydrogeologic and water-quality characteristics of the Prairie du Chien-Jordan aquifer, Southeast Minnesota

Quality of water in the Prairie du Chien-Jordan aquifer is generally good, except for some localized contamination, Coal-tar derivatives that contaminate the aquifer in St. Louis Park, a western suburb in the Twin Cities Metropolitan Area, pose the most serious threat to water quality. High hardness and iron concentration limit suitability for municipal and industrial use in parts of extreme southeast Minnesota. Confining beds of bedrock and drift, however, protect most of the aquifer from surface pollutants. The Prairie du Chien-Jordan aquifer is part of a sequence of sedimentary bedrock units in southeast Minnesota. The Jordan Sandstone is a white to yellow, fine- to coarse-grained sandstone. The Prairie du Chien Group comprises two dolomitic formations that are vuggy and fractured and interbedded with thin layers of shale. The aquifer formations were deposited in Paleozoic seas that occupied the Hollandale embayment. The aquifer dips toward the interior of the embayment where it is as deep as 750 feet below land surface and as thick as 500 feet. Permeability is secondary in the Prairie du Chien Group because of solution cavities and fractures, and intergranular in the Jordan Sandstone. Water in the aquifer is confined except in the eastern part. Water generally flows to the north and east into the Minnesota and Mississippi Rivers. A ground-water divide separates part of the flow southward into Iowa. This aquifer supplies more water than any other bedrock one in the State. Calcium magnesium bicarbonate type water is most common in the aquifer. Calcium and sulfate and, to a lesser degree sodium and magnesium, increase in concentration toward the southwestern part of the study area. Bicarbonate concentration, on the other hand, decreases toward the southwestern corner of the study area. Leakage from overlying Cretaceous deposits is the source of much of the sulfate and other minerals in the southwest. This report is one of a series on the hydrogeology and water quality of the 14 principal aquifers in Minnesota prepared by the U. S. Geological Survey. The U. S. Environmental Protection Agency requested these studies because of the need for information to develop its Underground Injection Control Program.

Minnesota↗
USGS2023

Scanning electron microscopic evaluation of broad ion beam milling effects to sedimentary organic matter: Sputter-induced artifacts or naturally occurring porosity?

Research examining organic-matter hosted porosity has significantly increased during the last decade due to greater focus on understanding hydrocarbon migration and storage in source-rock reservoirs, and technological advances in scanning electron microscopy (SEM) capabilities. The examination of nanometer-scale organic-matter hosted porosity by SEM requires the preparation of exceptionally flat geologic samples beyond the abilities of traditional mechanical polishing, which can deform or otherwise obscure organic surfaces. To meet this demand, broad ion beam (BIB) milling was introduced as a sample preparation technique for SEM petrographic analysis of geologic samples. As with any sample preparation technique, there can be unintended consequences. In this study, we examined the development of nanometer-scale sputter-induced voids caused by BIB milling of thermoset plastic binder material [poly(methyl methacrylate), PMMA] used for the mounting of geologic samples, and artifact sputter-induced voids in the organic matter of Green River Formation and Kimmeridge Clay Formation source rocks. Development of artifact sputter-induced voids was evaluated in relation to variations in the slope of the sample examination surface (0.0–4.9% slope), effectively varying the angle of ion incidence. The results indicate that only minor variations in the angle of ion incidence can generate sputter-induced voids in both PMMA (10.0–386.2 nm diameter sputter-induced voids) and sample sedimentary organic matter (solid bitumen; 12.2–103.6 nm diameter sputter-induced voids). Overall, average artifact pore diameters increased with increasing ion incidence angle within PMMA. Although sputter-induced voids within solid bitumen in the Green River Formation sample were only found in limited extent, the size of these void artifacts falls within the same size range as naturally occurring meso-macroporosity. That is, the pore-like artifacts could easily be misconstrued as naturally developed organic porosity, which is a major concern for SEM-based porosity evaluation methods. This study describes the factors that contribute to the creation of artifact sputter-induced voids, their distinguishing characteristics, and best practices for avoiding the creation of ion-induced artifacts.

International Journal of Coal Geology↗