Search USGS⌕ Search

SEARCH · Search USGS

Results for “AGU Advances”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

135 records · Page 6Linked to original sources
USGS2025

Reflections on a trio of North American earthquakes in 1925

In 1925, three moderately large damaging earthquakes occurred in North America over four months: the 28 February (local time; LT) M 6.2 Charlevoix, 27 June (LT) M 6.6 Montana, and 29 June M 6.5 Santa Barbara earthquakes. The centennial anniversaries of these events motivated this retrospective consideration focused on the ground motions generated by the three events, including a reconsideration of early intensity assignments for the Montana earthquake. At the time, these three earthquakes appeared to support the arguments of some geologists who downplayed the severity of seismic hazard in southern California relative to other parts of the country. Some of the arguments advanced at that time, for example that Los Angeles “has the least to fear from ‘Acts of God’ of any city under the American flag,” ( Hill, 1928 ) sound naïve if not laughable now, but a comparison of well‐constrained shaking distributions for the three earthquakes reveals the dramatic difference in wave propagation efficiency in western versus eastern North America (ENAM), which leads to moderate ENAM events being felt to much larger distances. At M 6.2, the 1925 Charlevoix earthquake was a notably large event in ENAM. This earthquake was the largest event in eastern Canada since 1870 and caused damage in the epicentral region in addition to towns as far away as 200 km, with felt shaking extending over 1000 km. In contrast, felt shaking from the Santa Barbara earthquake barely extended beyond ∼200 km. Compiling published intensity distributions for larger ENAM earthquakes, we show that perceptible earthquake shaking is not uncommon in ENAM over century time scales, but experience with weakly felt shaking may incline people to downplay potential earthquake risk.

California, Montana, Quebec↗
USGS2026

Lithium brine potential of North Dakota: Results from the 2025 sampling program

Lithium (Li), classified as a critical mineral and key in energy storage applications because of its high energy density, faces unprecedented demand. This has driven interest in unconventional sources of Li, especially brines from sedimentary basins. Accordingly, the spatial distribution of basinal brinehosted Li resources across North America is becoming better defined, including the Williston Basin underlying Saskatchewan, Canada. This has led to growing investment and exploration by industry throughout the 2020s; however, despite this interest, the Li potential of basinal brines of the Williston Basin in North Dakota remain underexplored. This work presents the results from the 2025 joint brine sampling campaign between the North Dakota Geological Survey, the United States Geological Survey (USGS), and The University of Texas at Austin. Twenty-seven fluid samples were collected from producing oil and water source wells from eight stratigraphic intervals across western North Dakota and analyzed for major cation and anion concentrations. Similar to southeastern Saskatchewan, the highest Li concentrations were identified in the Devonian Duperow Formation, with concentrations up to 179 mg/L being observed in a well commingled between the Duperow and Red River Formations. Some samples from the overlying Birdbear Formation exceeded 75 mg/L, whereas Li concentrations were lower in the Madison Group (33-44 mg/L) and the Three Forks (50 mg/L), Dawson Bay (43 mg/L), Winnipegosis (23 mg/L), and Red River (40.0 mg/L) Formations. This work indicates Li resource potential exists across the Williston Basin and advances our understanding of the Li distribution in basinal brines which could provide a new domestic source of this critical mineral.

North Dakota↗
USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗
USGS2025

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular↗
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2026

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗
USGS2025

International data gaps at the Center for Engineering Strong Motion Data

The Center for Engineering Strong Motion Data (CESMD) is utilized by seismologists, engineers, and disaster management professionals in the US and has historically achieved and distributed waveforms from across the globe for significant earthquakes. The increased access to the waveforms via Web API (Application Programming Interface) offers a unique opportunity to provide the community complete datasets, sampling a variety of tectonic environments and geologic conditions, increasing the number of available ground motion records for use in ground motion models (GMMs) and improving the accuracy of earthquake engineering evaluations. The objective of this study is to programmatically identify gaps in global event data from the past decade and backfill missing data gaps at CESMD. We first compare the CESMD catalog with the Advanced National Seismic System (ANSS) Comprehensive Earthquake Catalog identifying regions and time periods where strong-motion data is limited or inadequate. To backfill datasets at CESMD for significant events, we pinpoint regions and time intervals that lack information, creating a list of events for which we’d like to obtain data. An important facet of this work is identifying the source of data and metadata across earthquake repositories around the world and integrating these data repositories into our current strong-motion data processing workflow. In parallel with these newly processed datasets, we are developing a script to produce data origination citations to include provenance and attribution information to associate with respective datasets at CESMD. We showcase our methodology for identifying and filling data gaps at CESMD using three case studies (the 2018 Anchorage Alaska earthquake sequence, seismicity associated with the 2018 Hawaiian Kilauea volcano eruption, and several earthquakes in Turkey) and then outline our strategy to apply our data gap backfilling methods on an international scale.

Conference Paper↗
USGS2025

Approximate inland extent of saltwater intrusion at the base of the Biscayne aquifer, Miami-Dade County, Florida, 2022

Miami-Dade County is part of a densely populated urban corridor in southeastern Florida. The Biscayne aquifer serves as Miami-Dade County’s primary drinking water source and is characterized by highly permeable karstic limestone and carbonate sand. The aquifer’s coastal location and permeable nature make it susceptible to saltwater intrusion. Monitoring the current inland extent and the rate of movement of the saltwater front in the aquifer can inform management strategies for conserving the long-term sustainability of the county’s water supply. In the 1950s, the U.S. Geological Survey published a map of the inland extent of saltwater intrusion in the Biscayne aquifer and has continued to update this map to monitor changes over time, with the most recent update published in 2018. An updated map has been created showing the approximate inland extent of saltwater intrusion in the Biscayne aquifer in eastern Miami-Dade County in 2022, with the 2018 extent shown for comparison. The inland extent of saltwater intrusion was mapped through the interpretation of borehole electromagnetic induction logs and measurements of chloride and specific conductance in groundwater samples. The location of the saltwater interface at the base of the Biscayne aquifer was represented by the 1,000-milligram-per-liter isochlor. This report describes changes in the location of the saltwater interface from 2018 to 2022. By 2022, the saltwater interface had moved farther inland in both the northern and southern parts of the county, advancing by as much as 0.3 kilometer in the north and up to 0.8 kilometer in the Model Land Area to the south. However, it remained relatively unchanged from its 2018 position in the east-central part of the county.

Florida↗
USGS2024

New developments at the Center for Engineering Strong-Motion Data (CESMD)

The Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a single access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System, and other affiliates. The CESMD has been continuously improving its webtools to facilitate the access of strong-motion data and metadata for use in post-earthquake response and for scientific and engineering research applications. The Center provides raw and processed strong-motion data via the Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals. This paper focuses on the strong-motion products provided by the EDC where more than 48,000 records with peak ground accelerations greater than 0.1% g from over 2400 earthquakes are currently hosted. and on the ongoing efforts to develop data access tools and applications. The new developments and ongoing efforts in the EDC include: 1) enhancements to the CESMD webservices to facilitate access to station metadata, earthquake information, and strong motion records 2) new features to the interactive map interface, improving the visualization and access to earthquake, station, and record information, 3) efforts to develop a new web application tool for data format conversion from a number of data formats, 4) efforts to unify varying waveform data formats into a consistent format, 5) ongoing efforts to compile seismic station site geology, measured or inferred Vs30 values, shear-wave profiles, NEHRP site class, and available structural instrument deployment schematics, and 6) a special studies pages for research topic-specific ground motion datasets that offer uniform processing of records from a variety of sources.

Conference Paper↗
USGS2026

High-resolution magnetic survey using an unoccupied aerial vehicle to constrain buried lava flow geometry, volume, and eruptive history of Little Cones, Crater Flat, Nevada

Magnetic surveys are an important tool used to augment geologic mapping in distributed volcanic fields. Using magnetic anomalies, it is possible to model the geometry of shallowly buried volcanic features, such as conduits, sills, and lava flows. This subsurface mapping is important for understanding eruption dynamics and emplacement of lava flows, and it sometimes reveals buried volcanoes no longer visible at the surface. These data are critical to better interpret the numbers, styles, and magnitudes of eruptions in distributed volcanic fields and their associated volcanic hazards. New advances in unoccupied aerial vehicles (UAVs) offer an attractive middle range of resolution and aerial coverage between ground-based magnetic surveys and aeromagnetic surveys. Here, we present the results of a UAV fluxgate magnetic survey of the Little Cones, Nevada, scoria cones, which have been the target of previous ground and aeromagnetic surveys. The magnetic anomalies at Little Cones are of interest because the surrounding alluvium conceals lava flows that erupted from Little Cones, making it very difficult to understand the volume and morphology of lava flows from geologic mapping alone. Nonlinear inversion of UAV-collected magnetic data were used to model the thickness and morphology of buried Little Cones’ lava flows with higher precision than achieved previously. The sequence of events and calculated flow characteristics are then interpreted. The total volume of Little Cones, including concealed lava flows, is approximately 0.016 cubic kilometer, and the initial sheet flow erupted in less than 24 hours. The findings presented herein demonstrate that UAV-based magnetic surveys are a reliable method of data collection and an efficient alternative to other survey methods, facilitating development of a three-dimensional perspective of distributed volcanic fields.

Nevada↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗
USGS2025

Temporal and spatial comparison of coal mine ventilation methane emissions and mitigation quantified using PRISMA satellite data and on-site measurements

Emission monitoring at the facility level (bottom-up, BU) is key for accurate reporting of coal mine methane (CMM) emissions. Recent advances in aerial and satellite observations (top-down, TD) indicate that these methods have the potential to support CMM emissions monitoring and reporting of, as well as track the effectiveness of, mitigation actions. That said, studies have shown discrepancies between BU and TD estimations. Performing TD monitoring with concurrent BU measurements at the same mines may help address the observed discrepancies and improve quantification methods to narrow the gap between BU and TD data. This paper presents a comparison of concurrent BU-TD methane emission fluxes monitored from two ventilation shafts at a southwestern Virginia, USA, longwall mine to complement the existing body of studies on satellite-based monitoring of coal mines by incorporating continuous ground-based monitoring with concurrent TD monitoring of methane emission fluxes to address the gap and provide valuable insights into temporal emission patterns. The shafts were monitored on multiple dates between 2020 and 2023. BU monitoring was performed at the exhaust fans, while TD quantifications used PRISMA hyperspectral satellite data and two different wind reanalysis datasets (i.e., GEOS-FP and ERA5). This mine also offered a unique opportunity for BU-TD comparisons before and after ventilation air methane (VAM) oxidizer operation, which was installed at one of the shafts in 2022. The results showed that TD-estimated mean fluxes were generally lower than BU data, which were attributed to quantification difficulties associated with the low albedo caused by heavy vegetation and the terrain of the area. However, despite the discrepancies in mean emissions, both the interquartile range and the data range of the distributions generally overlapped, and the estimates correctly showed the emission trends.

Virginia↗
USGS2025

Modeling seawater intrusion along the Alabama coastline using physical and machine learning models to evaluate the effects of multiscale natural and anthropogenic stresses

Seawater intrusion threatens groundwater resources in coastal regions, including southern Baldwin County, Alabama, where the freshwater-saltwater interface dynamics remain poorly understood. To address this gap, this study uses combined physics-based and machine-learning models to quantify seawater intrusion caused by natural (storm surges) and anthropogenic (human activities) perturbations. The long short-term memory network and wavelet analysis were used to assess vertical aquifer vulnerabilities, revealing that the shallow part of the Coastal lowlands aquifer system (CL1) in the southern Baldwin County region is more susceptible to sea level rise and groundwater extraction than deeper aquifers. Based on these findings, a cross-sectional numerical model (physics approach) for the CL1 aquifer was developed to evaluate tidal and storm surge effects, using Tropical Storm Claudette (June 2021) as a case study. Results showed that tidal fluctuations had a minimal impact on the saltwater-freshwater interface location, whereas storm surges caused substantial inland movement, with effects lasting for nine months. The steady-state version of the three-dimensional (3D) physical model predicted seawater intrusion across the entire area, and convolutional neural network-based modeling further validated the model results. The 3D physical model was also applied to a smaller area to assess human impact on the saltwater interface due to two groundwater pumping scenarios (± 50% of the baseline pumping rate). Results revealed that a 50% increase in groundwater withdrawals caused seawater to advance ~ 320 m inland, whereas a 50% reduction led to a ~ 270-meter retreat. This study highlights the vulnerability of Alabama’s shallow coastal aquifers to seawater intrusion due to storm surges and human activities, and demonstrates that combining physics-based models with machine learning approaches can improve groundwater predictions, though its accuracy depends on the availability of site-specific data.

Alabama↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2023

Cursed? Why one does not simply add new data sets to supervised geothermal machine learning models

Recent advances in machine learning (ML) identifying areas favorable to hydrothermal systems indicate that the resolution of feature data remains a subject of necessary improvement before ML can reliably produce better models. Herein, we consider the value of adding new features or replacing other, low-value features with new input features in existing ML pipelines. Our previous work identified stress and seismicity as having less value than the other feature types (i.e., heat flow, distance to faults, and distance to magmatic activity) for the 2008 USGS hydrothermal energy assessment; hence, a fundamental question regards if the addition of new but partially correlated features will improve resulting models for hydrothermal favorability. Therefore, we add new maps for shear strain rate and dilation strain rate to fit logistic regression and XGBoost models, resulting in new 7-feature models that are compared to the old 5-feature models. Because these new features share a degree of correlation with the original relatively uninformative stress and seismicity features, we also consider replacement of the two lower-value features with the two new features, creating new 5-feature models. Adding the new features improves the predictive skill of the new 7-feature model over that of the old 5-feature model; albeit, that improvement is not statistically significant because the new features are correlated with the old features and, consequently, the new features do not present considerable new information. However, the new 5-feature XGBoost model has a statistically significant increase in predictive skill for known positives over the old 5-feature model at p = 0.06. This improved performance is due to the lower-dimensional feature space of the former than that of the latter. In higher-dimensional feature space, relationships between features and the presence or absence of hydrothermal systems are harder to discern (i.e., the 7-feature model likely suffers from the “curse of dimensionality”).

Geothermal Resources Council Transactions↗
USGS2024

Iodine-129 in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho, 2021–22

Between the 1950s and 1980s, wastewater generated at the Idaho National Laboratory contained Iodine-129 ( 129 I); this wastewater was discharged directly into the eastern Snake River Plain (ESRP) aquifer through a deep disposal well, unlined infiltration ponds, or leaked from distribution systems below industrial facilities. During 2021–22, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy and the Idaho Department of Environmental Quality Idaho National Laboratory Oversight Program, collected groundwater samples from 64 monitoring wells in the ESRP aquifer, 6 of which are part of a multilevel monitoring system, to determine the concentration of 129 I in the groundwater. These samples were analyzed by accelerator mass spectrometry as part of a long-term ongoing study to track trends and occurrences of this carcinogenic, long-lived radionuclide in the environment. Concentrations ranged from slightly above the locally determined background concentration of 5.4×10 −6 picocuries per liter, to just below the U.S. Environmental Protection Agency’s maximum contaminant level of 1 picocurie per liter. Discharge of wastewater containing 129 I has been discontinued to the aquifer, and long-term trends from a subset (n=15) of sampled wells show decreasing 129 I concentrations over the last three decades. Concentrations of 129 I in groundwater from monitoring wells near facilities at the Idaho National Laboratory are affected by episodic recharge from an ephemeral surface-water source and by the fracture-flow dominated hydrologic regime in the ESRP aquifer. The spatially focused sampling effort has also identified a low-level 129 I plume that affects long-term water quality near and downgradient from the Advanced Test Reactor Complex in the southwestern part of the facility that had not been clearly defined in previous sampling efforts, although the definition of the plume is somewhat limited by available data.

Idaho↗
USGS2024

Framework for mapping liquefaction hazard–Targeted design ground motions

Liquefaction-induced ground failure poses substantial challenges to geotechnical earthquake engineering design. Current approaches for designing against liquefaction hazards, as specified in most seismic provisions, focus on estimating a liquefaction factor of safety ( 𝐹⁢𝑆𝐿 ) and typically characterize earthquake loading using design parameters based on probabilistic or deterministic ground motion levels. Because 𝐹⁢𝑆𝐿 is estimated deterministically, this basis of design neglects considerable uncertainties for estimating liquefaction triggering and its consequences and results in a lack of liquefaction-specific design criteria, particularly as structural design has advanced toward risk-targeted performance objectives. This study presents a framework for developing liquefaction-targeted design criteria based on a minimum acceptable return period of liquefaction, informed by probabilistic liquefaction hazard analysis (PLHA). PLHA quantifies annualized rates of liquefaction by considering contributions from (1) the full ground-motion probability space, and (2) uncertainties in liquefaction triggering using probabilistic models. PLHA is used in this study to characterize the current, effective return periods of 𝐹⁢𝑆𝐿 ( 𝑇𝑅,𝐹⁢𝑆 ) obtained from conventional liquefaction hazard analysis (CLHA) using uniform-hazard ground motions. 𝑇𝑅,𝐹⁢𝑆 is evaluated in a parametric study of nearly 100 sites throughout the conterminous United States. The results indicate large geographic variations in acceptable liquefaction hazard levels, with implied 𝑇𝑅,𝐹⁢𝑆 ranging between approximately 1,000 to 3,000 years. To address these inconsistencies without the computational demands of full PLHA, a framework is proposed for developing a liquefaction-targeted design peak ground acceleration, 𝑃⁢𝐺⁢𝐴𝐿 , for use in liquefaction models that result in consistent liquefaction design levels across all geographic locations. The mapped 𝑃⁢𝐺⁢𝐴𝐿 is shown to be somewhat sensitive to site-specific properties, and adjustment factors are developed and presented. The proposed 𝑃⁢𝐺⁢𝐴𝐿 mapping procedure produces 𝐹⁢𝑆𝐿 estimates that are consistent with those obtained from full PLHA at a target 𝑇𝑅,𝐹⁢𝑆 , providing a promising roadmap to incorporating PLHA concepts into current liquefaction design methods.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗