Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Helicopter electromagnetic and magnetic geophysical survey data, Hunton anticline, south-central Oklahoma

This report is a digital data release for multiple geophysical surveys conducted in the Hunton anticline area of south-central Oklahoma. The helicopter electromagnetic and magnetic surveys were flown on March 16–17, 2007, in four areas of the Hunton anticline in south-central Oklahoma. The objective of this project is to improve the understanding of the geohydrologic framework of the Arbuckle-Simpson aquifer. The electromagnetic sensor for the helicopter electromagnetic survey consisted of six different transmitter-receiver orientations that measured the earth's electrical response at six distinct frequencies from approximately 500 Hertz to approximately 115,000 Hertz. The electromagnetic measurements were converted to electrical resistivity values, which were gridded and plotted on georeferenced maps. The map from each frequency represents a different depth of investigation for each area. The range of subsurface investigation is comparable to the depth of shallow groundwater. The four areas selected for the helicopter electromagnetic study, blocks A–D, have different geologic and hydrologic settings. Geophysical and hydrologic information from U.S. Geological Survey studies are being used by modelers and resource managers to develop groundwater resource plans for the Arbuckle-Simpson aquifer.

Oklahoma↗

Optimizing an inner-continental shelf geologic framework investigation through data repurposing and machine learning

The U.S. Geological Survey (USGS) and the National Oceanic Atmospheric Administration (NOAA) have collected approximately 5,400 km2 of geophysical and hydrographic data on the Atlantic continental shelf between Delaware and Virginia over the past decade and a half. Although originally acquired for different objectives, the comprehensive coverage and variety of data (bathymetry, backscatter, imagery and physical samples) presents an opportunity to merge collections and create high-resolution, broad-scale geologic maps of the seafloor. This compilation of data repurposes hydrographic data, expands the area of geologic investigation, highlights the versatility of mapping data, and creates new geologic products that would not have been independently possible. The data are classified using a variety of machine learning algorithms, including unsupervised and supervised methods. Four unique classes were targeted for classification, and source data include bathymetry, backscatter, slope, curvature, and shaded-relief. A random forest classifier used on all five source data layers was found to be the most accurate method for these data. Geomorphologic and sediment texture maps are derived from the classified acoustic data using over 200 groundtruth samples. The geologic data products can be used to identify sediment sources, inform resource management, link seafloor environments to sediment texture, improve our understanding of seafloor structure and sediment pathways, and demonstrate how ocean mapping resources can be useful beyond their original intent to maximize the footprint and scientific impact of a study.

Delaware, Maryland, Virginia↗

Preliminary atlas of active shallow tectonic deformation in the Puget Lowland, Washington

This atlas presents an up-to-date map compilation of the geological and geophysical observations that underpin interpretations of active, surface-deforming faults in the Puget Lowland, Washington. Shallow lowland faults are mapped where observations of deformation from paleoseismic, seismic-reflection, and potential-field investigations converge. Together, results from these studies strengthen the identification and characterization of regional faults and show that as many as a dozen shallow faults have been active during the Holocene. The suite of maps presented in our atlas identifies sites that have evidence of deformation attributed to these shallow faults. For example, the paleoseismic-investigations map shows where coseismic surface rupture and deformation produced geomorphic scarps and deformed shorelines. Other maps compile results of seismic-reflection and potential-field studies that demonstrate evidence of deformation along suspected fault structures in the subsurface. Summary maps show the fault traces derived from, and draped over, the datasets presented in the preceding maps. Overall, the atlas provides map users with a visual overview of the observations and interpretations that support the existence of active, shallow faults beneath the densely populated Puget Lowland.

Open-File Report↗

Geologic map of pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Much of the southeastern United States, including all of Florida, is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains which have accumulated since Middle Jurassic time. The pre-Middle Jurassic rocks that underlie these coastal plains in Florida, here collectively referred to as “basement,” are known only from a relatively small number of boreholes. This scientific investigations map presents an interpretation of the basement geology in a 1:1,000,000-scale subsurface geologic map with supporting text, data, and figures. The subsurface mapping methodology integrates petrographic, geochronological, thermochronological, geochemical, and mineralogical analyses of drill cores and cuttings in the context of regional geophysical data. The pre-Middle Jurassic rocks of Florida consist of the Gondwanan (West African) Suwannee terrane which was accreted to Laurentia during the Alleghanian orogeny and subsequently intruded by Permian granites, superposed by early Mesozoic rift basins, and partially overlain by bimodal Jurassic volcanic rocks. The younger basement components, specifically the Southwest Florida volcanic province, North Florida tholeiites, early Mesozoic rift basins, and Alleghanian granitoids, have correlative and contemporaneous units throughout the Appalachian orogen. In contrast, Florida’s older basement rocks, including Paleozoic siliciclastic strata of the Suwannee basin, North Florida volcanic series, Osceola and Gaskin intrusive complexes, and the St. Lucie Metamorphic Complex, have neither surface exposures nor unequivocal correlates. Major structures include early Mesozoic normal faults and northwest-striking transfer zones such as the Jay fault. Many of these faults define the boundaries of subbasins within the South Georgia rift system. Top-of-basement structure contours show gentle arches and embayments that are also recognized in overlying coastal plain strata.

Florida↗

Factors related to well yield in the fractured-bedrock aquifer of New Hampshire

The New Hampshire Bedrock Aquifer Assessment was designed to provide information that can be used by communities, industry, professional consultants, and other interests to evaluate the ground-water development potential of the fractured-bedrock aquifer in the State. The assessment was done at statewide, regional, and well field scales to identify relations that potentially could increase the success in locating high-yield water supplies in the fractured-bedrock aquifer. statewide, data were collected for well construction and yield information, bedrock lithology, surficial geology, lineaments, topography, and various derivatives of these basic data sets. Regionally, geologic, fracture, and lineament data were collected for the Pinardville and Windham quadrangles in New Hampshire. The regional scale of the study examined the degree to which predictive well-yield relations, developed as part of the statewide reconnaissance investigation, could be improved by use of quadrangle-scale geologic mapping. Beginning in 1984, water-well contractors in the State were required to report detailed information on newly constructed wells to the New Hampshire Department of Environmental Services (NHDES). The reports contain basic data on well construction, including six characteristics used in this study?well yield, well depth, well use, method of construction, date drilled, and depth to bedrock (or length of casing). The NHDES has determined accurate georeferenced locations for more than 20,000 wells reported since 1984. The availability of this large data set provided an opportunity for a statistical analysis of bedrock-well yields. Well yields in the database ranged from zero to greater than 500 gallons per minute (gal/min). Multivariate regression was used as the primary statistical method of analysis because it is the most efficient tool for predicting a single variable with many potentially independent variables. The dependent variable that was explored in this study was the natural logarithm (ln) of the reported well yield. One complication with using well yield as a dependent variable is that yield also is a function of demand. An innovative statistical technique that involves the use of instrumental variables was implemented to compensate for the effect of demand on well yield. Results of the multivariate-regression model show that a variety of factors are either positively or negatively related to well yields. Using instrumental variables, well depth is positively related to total well yield. Other factors that were found to be positively related to well yield include (1) distance to the nearest waterbody; (2) size of the drainage area upgradient of a well; (3) well location in swales or valley bottoms in the Massabesic Gneiss Complex and Breakfast Hill Granite; (4) well proximity to lineaments, identified using high-altitude (1:80,000-scale) aerial photography, which are correlated with the primary fracture direction (regional analysis); (5) use of a cable tool rig for well drilling; and (6) wells drilled for commercial or public supply. Factors negatively related to well yields include sites underlain by foliated plutons, sites on steep slopes sites at high elevations, and sites on hilltops. Additionally, seven detailed geologic map units, identified during the detailed geologic mapping of the Pinardville and Windham quadrangles, were found to be positively or negatively related to well yields. Twenty-four geologic map units, depicted on the Bedrock Geologic Map of New Hampshire, also were found to be positively or negatively related to well yields. Maps or geographic information system (GIS) data sets identifying areas of various yield probabilities clearly display model results. Probability criteria developed in this investigation can be used to select areas where other techniques, such as geophysical techniques, can be applied to more closely identify potential drilling sites for high-yielding

Professional Paper↗

Application of aerial gamma-ray spectrometric and magnetic surveys in geologic mapping: a case study in southern Virginia and northern North Carolina

Aerial gamma-ray spectrometric and magnetic survey maps are valuable aids for geologic mapping where rocks are poorly exposed in south-central Virginia and northernmost North Carolina. Broad low areas on the potassium and thorium gamma-ray survey maps distinguish the Carolina, Spring Hope, and Roanoke Rapids terranes from more highly radiogenic areas of the Raleigh and Triplet terranes, reflecting differences in the compositions of residual soils. Granitic rocks are delineated most clearly by potassium highs and less clearly by thorium highs. Nearly all the thorium highs other than those related to granites are associated with amphibolite-facies rocks of the Raleigh and Triplet terranes. Contrasting thorium lows within these terranes help to distinguish the individual rock units. In the Carolina and Roanoke Rapids terranes, high-gradient magnetic patterns delineate stratified metavolcanic and metasedimentary units that are not discernible from the gamma-ray surveys. Circular magnetic highs coincide with gabbro plutons, and numerous magnetic lineaments correspond to Jurassic diabase dikes. Magnetically uniform, low-gradient areas coincide with less mafic plutons. A magnetic lineament (high) coincides with the Nutbush Creek fault zone, and other faults are distinguished as boundaries between zones of contrasting geophysical properties. The gamma-ray spectrometric and magnetic survey maps most effectively indicate geologic features in the region if they are employed collectively, and if they are interpreted in concert with simultaneous geologic field investigations.

North Carolina;Virginia↗

Preliminary hydrogeologic assessment and study plan for a regional ground-water resource investigation of the Blue Ridge and Piedmont provinces of North Carolina

Prolonged drought, allocation of surface-water flow, and increased demands on ground-water supplies resulting from population growth are focuses for the need to evaluate ground-water resources in the Blue Ridge and Piedmont Provinces of North Carolina. Urbanization and certain aspects of agricultural production also have caused increased concerns about protecting the quality of ground water in this region. More than 75 percent of the State's population resides in the Blue Ridge and Piedmont Provinces in an area that covers 30,544 square miles and 65 counties. Between 1940 and 2000, the population in the Piedmont and Blue Ridge Provinces increased from 2.66 to 6.11 million; most of this increase occurred in the Piedmont. Of the total population, an estimated 1.97 million people, or 32.3 percent (based on the 1990 census), relied on ground water for a variety of uses, including commercial, industrial, and most importantly, potable supplies. Ground water in the Blue Ridge and Piedmont traditionally has not been considered as a source for large supplies, primarily because of readily available and seemingly limitless surface-water supplies, and the perception that ground water in the Blue Ridge and Piedmont Provinces occurs in a complex, generally heterogeneous geologic environment. Some reluctance to use ground water for large supplies derives from the reputation of aquifers in these provinces for producing low yields to wells, and the few high-yield wells that are drilled seem to be scattered in areas distant from where they are needed. Because the aquifers in these provinces are shallow, they also are susceptible to contamination by activities on the land surface. In response to these issues, the North Carolina Legislature supported the creation of a Resource Evaluation Program to ensure the long-term availability, sustainability, and quality of ground water in the State. As part of the Resource Evaluation Program, the North Carolina Division of Water Quality, Groundwater Section, in cooperation with the U.S. Geological Survey, initiated a multiyear study of ground water in the Blue Ridge and Piedmont Provinces. The study began in 1999. Most of the study area is underlain by a complex, two-part, regolith-fractured crystalline rock aquifer system. Thickness of the regolith throughout the study area is highly variable and ranges from 0 to more than 150 feet. The regolith consists of an unconsolidated or semiconsolidated mixture of clay and fragmental material ranging in grain size from silt to boulders. Because porosities range from 35 to 55 percent, the regolith provides the bulk of the water storage within the Blue Ridge and Piedmont ground-water system. At the base of the regolith is the transition zone where saprolite grades into unweathered bedrock. The transition zone has been identified as a potential conduit for rapid ground-water flow. If this is the case, the transition zone also may serve as a conduit for rapid movement of contaminants to nearby wells or to streams with channels that cut into 1 U.S. Geological Survey, Raleigh, North Carolina. 2 North Carolina Department of Environment and Natural Resources, Division of Water Quality, Groundwater Section. or through the transition zone. How rapidly a contaminant moves through the system largely may be a function of the characteristics of the transition zone. The transition zone is one of several topics identified during the literature review and data synthesis, for which there is a deficiency in data and understanding of the processes involved in the movement of ground water to surface water. Because the Blue Ridge and Piedmont study area is so large, and the hydrogeology diverse, it is not feasible to study all of the area in detail. A more feasible approach is to select areas that are most representative of the land use, geology, and hydrology to obtain an understanding of the hydrologic processes in the selected areas, and transfer the knowledge from these local "type areas" to similar regional hydrogeologic areas. For the purpose of this study, the term "type area" applies to a 10- to 100-square mile area within a hydrogeologic terrane where information is sufficient to develop and test a concept of ground-water flow by using analytical or numerical methods that can be validated by field measurements. Ideally, these type areas are selected to be representative of the flow system that is present wherever a particular hydrogeologic terrane is present. This report consists of two basic parts. The first part describes the results of a comprehensive review and synthesis of information and literature that provides the basic background for the study. This includes current (2002) knowledge regarding general geology and the hydrogeologic framework of the fractured-rock aquifer system that underlies the Blue Ridge and Piedmont Provinces. In spite of the quantity of information identified during the literature review and the amount of past work that has been documented, there are still research needs to be met. The second part of the report describes State ground-water issues and problems, available data, and data deficiencies. It also describes the design and implementation of efforts to characterize ground-water quality and to quantify factors that influence the movement and availability of ground water in the hydrogeologic terranes characterized by (1) massive or foliated crystalline rocks overlain by thick regolith and (2) massive or foliated crystalline rocks overlain by thin regolith. As of September 2001, seven sites had been identified as potential study sites to be used to characterize the hydrogeology and water quality of ype areas considered representative of the larger terranes. Detailed geologic mapping, core drilling, well installation, and surface and borehole geophysical surveys are in progress at four of the sites.

North Carolina↗

Tests of ground-penetrating radar and induced polarization for mapping fluvial mine tailings on the floor of the Couer d'Alene River, Idaho

In order to investigate sequences of toxic mine tailings that have settled in the bed of the Coeur d'Alene River, Idaho, (see figure 1) we improvised ways to make geophysical measurements on the river floor. To make ground penetrating radar (GPR) profiles, we mounted borehole antennas on a skid that was towed along the river bottom. To make induced polarization (IP) profiles, we devised a bottom streamer from a garden hose, lead strips, PVC standoffs, and insulated wire. Each approach worked and provided uniquely different information about the buried toxic sediments. GPR showed shallow stratigraphy, but did not directly detect the presence of contaminating metals. IP showed a zone of high chargeability that is probably due to pockets of relatively higher metal content. Neither method was able to define the base of the fluvial tailings section, at least in part because the IP streamer was deliberately designed to sample only the top three meters of sediments to maximize horizontal resolution.

Idaho↗

Helicopter electromagnetic and magnetic geophysical survey data, Swedeburg and Sprague study areas, eastern Nebraska, May 2009

This report is a release of digital data from a helicopter electromagnetic and magnetic survey conducted by Fugro Airborne Surveys in areas of eastern Nebraska as part of a joint hydrologic study by the Lower Platte North and Lower Platte South Natural Resources Districts, and the U.S. Geological Survey. The survey flight lines covered 1,418.6 line km (882 line mile). The survey was flown from April 22 to May 2, 2009. The objective of the contracted survey was to improve the understanding of the relation between surface water and groundwater systems critical to developing groundwater models used in management programs for water resources. The electromagnetic equipment consisted of six different coil-pair orientations that measured resistivity at separate frequencies from about 400 hertz to about 140,000 hertz. The electromagnetic data were converted to georeferenced electrical resistivity grids and maps for each frequency that represent different approximate depths of investigation for each survey area. The electrical resistivity data were input into a numerical inversion to estimate resistivity variations with depth. In addition to the electromagnetic data, total field magnetic data and digital elevation data were collected. Data released in this report consist of flight line data, digital grids, digital databases of the inverted electrical resistivity with depth, and digital maps of the apparent resistivity and total magnetic field. The range of subsurface investigation is comparable to the depth of shallow aquifers. The survey areas, Swedeburg and Sprague, were chosen based on results from test flights in 2007 in eastern Nebraska and needs of local water managers. The geophysical and hydrologic information from U.S. Geological Survey studies are being used by resource managers to develop groundwater resource plans for the area.

Open-File Report↗

Ten years of studies on Maryland's inner Continental Margin and coastal bays

During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analyses completed during the first four years, a late Quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian (oxygen-isotope stages 7 and/or 9) transgressive shelf sands. Overlying the Q1 unit, the Q2 unit is a 6-meter thick mud sequence of oxygen-isotope stage 5 (128-75 ka) age. Units Q3 and Q4 representing fluvial and leading edge estuarine deposits (oxygen-isotope stages 4, 3 and 2) filled numerous paleochannels that were incised into units Q2 and Q1. Modern trailing-edge transgressive shelf shoals (Unit Q5) discontinuously cap the sequence. The 5th and 6th years studies reported on the economic minerals of surficial and cored sediments. Vibracores collected off the Maryland's shelf during previous studies were analyzed for mineral types and abundances, weight percent of general size fractions, and heavy mineral (HM) content. Mineralogic maturity indices were compiled to correlate the THM and economic heavy minerals (EHM) abundances with position offshore, sediment type, and the indices themselves. For the 7th year, the Maryland Geological Survey re-examined geophysical records and lithological data originally collected by the Army Corps of Engineers to locate and assess beach fill borrow areas for the Ocean City Beach Replenishment Project. Data from 163 vibracores and over 300 kilometers of high-resolution seismic profile records collected off Ocean City, Maryland, supported the stratigraphic model developed by MGS during the first four years of the AASG-MMS program. The Maryland coastal bays became the focus of study during the 8th and 9th years during which seismic records, cores and surficial sediment were collected in Isle of Wight and Assawoman Bays. Shallow pretransgression surface was mapped, relating the existing streams to offshore paleochannels. The tenth year study focused on developing a repository for vibracores collected on Maryland's inner continental shelf.During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analysis completed during the first four years, a late quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian transgressive shelf sands.

Marine Georesources and Geotechnology↗

Hydrogeologic facies characterization of an alluvial fan near Fresno, California, using geophysical techniques

DBCP (1,2-dibromo-3-chloropropane) contamination in the sole source aquifer near Fresno, California, has significantly affected drinking-water supplies. Borehole and surface geophysical data were integrated with borehole textural data to characterize the Kings River alluvial fan sediments and to provide a framework for computer modeling of pesticide transport in ground water. Primary hydrogeologic facies units, such as gravel, coarse sand or gravel, fine sand, and silt and clay, were identified in cores collected from three borings located on a 4.6-kilometer transect of multilevel monitoring wells. Borehole geophysical logs collected from seven wells and surface geophysical surveys were used to extrapolate hydrogeologic facies to depths of about 82meters and to correlate the facies units with neighboring drilling sites. Thickness ranged from 0.3to 13 meters for sand and gravel units, and from 0.3 to 17 meters for silt and clay. The lateral extent of distinct silt and clay layers was mapped using shallow seismic reflection and ground-penetrating radar techniques. About 3.6 kilometers of seismic reflection data were collected; at least three distinct fine-grained layers were mapped. The depth of investigation of the seismic survey ranged from 34 to 107 meters below land surface, and vertical resolution was about 3.5 meters. The ground-penetrating radar survey covered 3.6kilometers and imaged a 1.5-meters thick, continuous fine-grained layer located at a depth of about 8 meters. Integrated results from the borehole sediment descriptions and geophysical surveys provided a detailed characterization over a larger areal extent than traditional hydrogeologic methods alone.

Open-File Report↗

Helicopter Electromagnetic and Magnetic Geophysical Survey Data, Oakland, Ashland, and Firth Study Areas, Eastern Nebraska, March 2007

This report is a digital data release for a helicopter electromagnetic and magnetic survey that was conducted during March 2007 in three 93-square-kilometer (36-square-mile) areas of eastern Nebraska as part of a joint State of Nebraska and U.S. Geological Survey study. The objective of the survey is to improve the understanding of the relationship between surface-water and ground-water systems critical to developing water resource management programs. The electromagnetic equipment consisted of six different coil-pair orientations that measured electrical resistivity at separate frequencies from about 400 hertz to about 115,000 hertz. The electromagnetic data were converted to electrical resistivity geo-referenced grids and maps, each representing different approximate depths of investigation for each area. The range of subsurface investigation is comparable to the depth of shallow aquifers. The three areas selected for the study, Ashland, Firth, and Oakland, have glacial terrains and bedrock that typify different hydrogeologic settings for surface water and ground water in eastern Nebraska. The geophysical and hydrologic information from U.S. Geological Survey studies are being used by resource managers to develop ground-water resource plans for the area.

Open-File Report↗

Seismic-hazard maps for the conterminous United States, 2014

The maps presented here provide an update to the 2008 data contained in U.S Geological Survey Scientific Investigations Map 3195 ( http://pubs.usgs.gov/sim/3195/ ).Probabilistic seismic-hazard maps were prepared for the conterminous United States for 2014 portraying peak horizontal acceleration and horizontal spectral response acceleration for 0.2- and 1.0-second periods with probabilities of exceedance of 10 percent in 50 years and 2 percent in 50 years. All of the maps were prepared by combining the hazard derived from spatially smoothed historical seismicity with the hazard from fault-specific sources. The acceleration values contoured are the random horizontal component. The reference site condition is firm rock, defined as having an average shear-wave velocity of 760 m/s in the top 30 meters corresponding to the boundary between NEHRP (National Earthquake Hazards Reduction program) site classes B and C. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. The grid of points was contoured to produce the final representation of the seismic hazard. These maps are intended to summarize the available quantitative information about seismic ground motion hazard for the conterminous United States from geologic and geophysical sources.

Scientific Investigations Map↗

Geophysically inferred structural and lithologic map of the precambrian basement in the Joplin 1° x 2° quadrangle, Kansas and Missouri

This report is an analysis of regional gravity and aeromagnetic data that was carried out as part of a Conterminuous United States Mineral Assessment Program (CUSMAP) study of the Joplin 1° X 2° quadrangle, Kansas and Missouri. It is one in a series of reports representing a cooperative effort between the U.S. Geological Survey, Kansas Geological Survey, and Missouri Department of Natural Resources, Division of Geology and Land Survey. The work presented here is part of a larger project whose goal is to assess the mineral resource potential of the Paleozoic sedimentary section and crystalline basement within the quadrangle. Reports discussing geochemical, geological, and various other aspects of the study area are included in this Miscellaneous Field Studies Map series as MF-2125-A through MF-2125-E. Geophysical interpretation of Precambrian crystalline basement lithology and structure is the focus of this report. The study of the crystalline basement is complicated by the lack of exposures due to the presence of a thick sequence of Phanerozoic sedimentary cover. In areas where there are no outcrops, the geologist must turn to other indirect methods to assist in an understanding of the basement. Previous investigations of the buried basement in this region used available drill hole data, isotope age information, and regional geophysical data (Sims, 1990; Denison and others, 1984; Bickford and others, 1986). These studies were regional in scope and were presented at state and multistate scales. The work documented here used recently collected detailed gravity and aeromagnetic data to enhance the regional geologic knowledge of the area. Terrace-density and terrace-magnetization maps were calculated from the gravity and aeromagnetic data, leading directly to inferred physical-property (density and magnetization) maps. Once these maps were produced, the known geology and drill-hole data were reconciled with the physical-property maps to form a refined structural and lithologic map of the crystalline basement.

Kansas, Missouri↗

Site effects in Port-au-Prince (Haiti) from the analysis of spectral ratio and numerical simulations.

To provide better insight into seismic ground motion in the Port‐au‐Prince metropolitan area, we investigate site effects at 12 seismological stations by analyzing 78 earthquakes with magnitude smaller than 5 that occurred between 2010 and 2013. Horizontal‐to‐vertical spectral ratio on earthquake recordings and a standard spectral ratio were applied to the seismic data. We also propose a simplified lithostratigraphic map and use available geotechnical and geophysical data to construct representative soil columns in the vicinity of each station that allow us to compute numerical transfer functions using 1D simulations. At most of the studied sites, spectral ratios are characterized by weak‐motion amplification at frequencies above 5 Hz, in good agreement with the numerical transfer functions. A mismatch between the observed amplifications and simulated response at lower frequencies shows that the considered soil columns could be missing a deeper velocity contrast. Furthermore, strong amplification between 2 and 10 Hz linked to local topographic features is found at one station located in the south of the city, and substantial amplification below 5 Hz is detected near the coastline, which we attribute to deep and soft sediments as well as the presence of surface waves. We conclude that for most investigated sites in Port‐au‐Prince, seismic amplifications due to site effects are highly variable but seem not to be important at high frequencies. At some specific locations, however, they could strongly enhance the low‐frequency content of the seismic ground shaking. Although our analysis does not consider nonlinear effects, we thus conclude that, apart from sites close to the coast, sediment‐induced amplification probably had only a minor impact on the level of strong ground motion, and was not the main reason for the high level of damage in Port‐au‐Prince.

Port-au-Prince↗

Geologic map and hydrogeologic investigations of the upper Santa Cruz River basin, southern Arizona

This report includes an updated geologic map and cross sections of the upper Santa Cruz River basin, southern Arizona. The map and cross sections describe the geometry, thickness, and structure of the Miocene to Holocene units which form the main aquifers in the basin. The report also includes results of new hydrogeologic studies including (1) mapping and defining depth to bedrock based on geophysical data in the map area to better define the geometry and structure of the basin aquifers, (2) describing newly recognized hydrologically significant faults in the Peck Canyon and Sopori Wash areas, and (3) evaluating groundwater sources and hydrogeology of the Potrero Creek wetlands.

Arizona↗

Mineral resource assessment of pegmatite minerals in the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina

Mineral resources of the Greenville 1° x 2° quadrangle, South Carolina, Georgia, and North Carolina, were assessed between 1984 and 1990 under the Conterminuous United States Mineral Assessment Program (CUSMAP) of the U.S. Geological Survey (USGS). The mineral resource assessments were made on the basis of geologic, geochemical, and geophysical investigations and on the distribution of mines, prospects, and mineral occurrences reported in the literature. This report is an assessment of the minerals associated with mica pegmatites in the Greenville quadrangle. It is based on the geology as mapped by Nelson and others (1989), on field studies conducted from 1952 to 1962 by the USGS for the Defense Minerals Exploration Administration (DMEA) and the concurrent examination of many of the known mica mines and prospects in Georgia, and on the published geologic literature and an unpublished report by K.H. Teague on file with the South Carolina Development Board, Division of Geology, in Columbia, S.C.

Georgia, North Carolina, South Carolina↗

Maps showing anomaly patterns for silver, molybdenum, lead, and zinc in altered rocks and soils, Williams Fork and St. Louis Peak Roadless Areas, Clear Creek, Grand, and Summit counties, Colorado

The U.S. Geological Survey and the U.S Bureau of Mines conducted field studies from 1979 through 1982 to assess the mineral resource potential of the Williams Fork and St. Louis Peak Roadless Areas and the Vasquez Peak Wilderness Study Area. Included were geological, geochemical, and geophysical studies by the U.S. Geological Survey and investigation of known prospects and mines by the U.S. Bureau of Mines. The area of study is located in the Arapaho National Forest, nort of Interstate Highway 70, west of U.S. Highway 40, and east of the Blue River, on the west side of the Front Range (fig. 1).

Colorado↗