Search USGS⌕ Search

SEARCH · Search USGS

Results for “American Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Evidence for increased latent heat transport during the Cretaceous (Albian) greenhouse warming

Quantitative estimates of increased heat transfer by atmospheric H 2O vapor during the Albian greenhouse warming suggest that the intensified hydrologic cycle played a greater role in warming high latitudes than at present and thus represents a viable alternative to oceanic heat transport. Sphaerosiderite ??18O values in paleosols of the North American Cretaceous Western Interior Basin are a proxy for meteoric ??18O values, and mass-balance modeling results suggest that Albian precipitation rates exceeded modern rates at both mid and high latitudes. Comparison of modeled Albian and modern precipitation minus evaporation values suggests amplification of the Albian moisture deficit in the tropics and moisture surplus in the mid to high latitudes. The tropical moisture deficit represents an average heat loss of ???75 W/m2 at 10??N paleolatitude (at present, 21 W/m2). The increased precipitation at higher latitudes implies an average heat gain of ???83 W/m2 at 45??N (at present, 23 W/m2) and of 19 W/m2 at 75??N (at present, 4 W/m2). These estimates of increased poleward heat transfer by H2O vapor during the Albian may help to explain the reduced equator-to-pole temperature gradients. ?? 2004 Geological Society of America.

Geology↗

Monitoring inland storm surge and flooding from Hurricane Ike in Texas and Louisiana, September 2008

The U.S. Geological Survey (USGS) deployed a temporary monitoring network of 117 pressure transducers (sensors) at 65 sites over an area of about 5,000 square miles to record the timing, areal extent, and magnitude of inland hurricane storm surge and coastal flooding generated by Hurricane Ike, which struck southeastern Texas and southwestern Louisiana September 12-13, 2008. Fifty-six sites were in Texas and nine were in Louisiana. Sites were categorized as surge, riverine, or beach/wave on the basis of proximity to the Gulf Coast. One-hundred five sensors from 59 sites (fig. 1) were recovered; 12 sensors from six sites either were lost during the storm or were not retrieved. All 59 sites (41 surge, 10 riverine, 8 beach/wave) had sensors to record water pressure (fig. 2), which is expressed as water level in feet above North American Vertical Datum of 1988 (NAVD88), and 46 sites had an additional sensor to record barometric pressure, expressed in pounds per square inch. Figure 3 shows an example of water level and barometric pressure over time recorded by sensors during the storm.

Louisiana, Texas↗

Geomorphic evidence for enhanced Pliocene-Quaternary faulting in the northwestern Basin and Range

Mountains in the U.S. Basin and Range Province are similar in form, yet they have different histories of deformation and uplift. Unfortunately, chronicling fault slip with techniques like thermochronology and geodetics can still leave sizable, yet potentially important gaps at Pliocene–Quaternary (∼105–106 yr) time scales. Here, we combine existing geochronology with new geomorphic observations and approaches to investigate the Miocene to Quaternary slip history of active normal faults that are exhuming three footwall ranges in northwestern Nevada: the Pine Forest Range, the Jackson Mountains, and the Santa Rosa Range. We use the National Elevation Dataset (10 m) digital elevation model (DEM) to measure bedrock river profiles and hillslope gradients from these ranges. We observe a prominent suite of channel convexities (knickpoints) that segment the channels into upper reaches with low steepness (mean k sn = ∼182; θ ref = 0.51) and lower, fault-proximal reaches with high steepness (mean k sn = ∼361), with a concomitant increase in hillslope angles of ∼6°–9°. Geologic maps and field-based proxies for rock strength allow us to rule out static causes for the knickpoints and interpret them as transient features triggered by a drop in base level that created ∼20% of the existing relief (∼220 m of ∼1050 m total). We then constrain the timing of base-level change using paleochannel profile reconstructions, catchment-scale volumetric erosion fluxes, and a stream-power–based knickpoint celerity (migration) model. Low-temperature thermochronology data show that faulting began at ca. 11–12 Ma, yet our results estimate knickpoint initiation began in the last 5 Ma and possibly as recently as 0.1 Ma with reasonable migration rates of 0.5–2 mm/yr. We interpret the collective results to be evidence for enhanced Pliocene–Quaternary fault slip that may be related to tectonic reorganization in the American West, although we cannot rule out climate as a contributing mechanism. We propose that similar studies, which remain remarkably rare across the region, be used to further test how robust this Plio–Quaternary landscape signal may be throughout the Great Basin.

U.S. Basin and Range Province↗

Multi-period response spectra

Multi-period response spectra (MPRS) are incorporated in the development of seismic design ground motions in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and are approved for adoption in the American Society of Civil Engineers (ASCE) Standard, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). MPRS are incorporated in these design regulations because it was discovered that the standard spectral shape based on two periods and one reference site class was substantially understating spectral response in moderately long period structures located on soft soil sites where ground motion hazard is dominated by large magnitude events. These are the motions that are relevant to tall buildings in the Los Angeles region and of interest to the Los Angeles Tall Buildings Seismic Design Council (LATBSDC). The MPRS incorporation updated Chapters 11, 20, 21, and 22 of the 2020 NEHRP Provisions (a.k.a. FEMA P-2082); changes are described in detail in the commentary of FEMA P-2082. The MPRS also influenced the development of the 2018 U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) for the conterminous U.S. because valid ground motion models for all periods and site classes of interest were required. FEMA P-2082 is complemented by the FEMA P-2078 technical report that provides a procedure for approximating MPRS outside of the conterminous U.S. This paper presents a condensed version of the relevant sections of FEMA P-2082 and FEMA P-2078 that would interest the LATBSDC.

Conference Paper↗

New Jersey and Landsat

New Jersey ranks among the smallest of States but packs a lot within its borders. Of course, that includes the more than 9 million people who make it the most densely populated State, but it also includes diverse landscapes. Ranging from Atlantic Ocean barrier islands and beaches to the Appalachian Mountains, and Pine Barrens forests to swampland, the “Garden State” retains remnants of an agricultural past with produce, horse, and dairy farms and plant nurseries. The third State to join the Union has had a strong geographic presence in U.S. history. More than 200 American Revolution battles and skirmishes were fought in New Jersey—more than in any other State. Manufacturing, tourism, and fishing have each had a significant effect on New Jersey’s industrial history. Today, many residents commute from this strategic location to work in New York City, just across the Hudson River to the northeast, or in Philadelphia, just across the Delaware River to the west. A dense population and environmental changes can increase risks for residents and the natural resources around them. Landsat helps officials monitor and plan for resilient cities and landscapes.

New Jersey↗

Search for geothermal seismic noise in the East Mesa area, Imperial Valley, California

The U. S. Geological Survey made seismic noise measurements in the East Mesa area of Imperial Valley, California, to find out if a noise anomaly was associated with the Mesa thermal anomaly. Thirty-three locations were occupied in the area using slow-speed tape-recording seismic systems. One of the stations (CEN) was operated close to where a geothermal test well was subsequently drilled by the U. S. Bureau of Reclamation. Several sources of cultural noise are present in the area. Large fluctuations in noise level, superposed on a constant high level of noise, occur from traffic on a freeway to the south of the region. There is noise generated by canals to the west and south and agricultural activity to the west of the region. Noise at 2.5 Hz frequency generated by a small waterfall (power drop) on the All American Canal propagates as far as 10 km. Average noise levels were computed at each station using several quiet samples selected from 4-hour sections of data recorded at night and contoured. Spatial distribution of 2-3 Hz noise show noise radiating from the power drop. Noise in 0-2, 3-5, and 5-10 Hz bands show high levels extending along the freeway to the south and East High Line Canal to the west of the area. The Mesa thermal anomaly is centered about 2.5 km from the freeway and canal and does not seem to have any anomalous noise amplitudes associated with it. Additional results using data from two arrays of closely-spaced instruments extending from the freeway to the Mesa thermal anomaly also show no indications of high noise levels over the anomaly. This conclusion differs from the results of two previous surveys in the area (Douze and Sorrells, 1972; Geothermal Staff of Teledyne-Geotech, 1972) which show well defined noise anomalies in the 0-2, and 3-5 Hz frequency bands. A search was also made for anomalous features in noise spectra and for coherent wave trains indicating the presence of discrete sources of noise. The only predominant feature in the spectra is the 2.5 Hz peak seen at most stations, from noise generated by the power drop. Records from several three-element, L-shaped arrays with 0.3 km instrument spacing show very little visual coherence. Measurements using a cross-spectral method, however, show that highly coherent waves are found at 0.4 and 2.5 Hz; coherence is less, though significant, at 3.4 and 4.4 Hz; direction studies using phase delays from the arrays give many non-unique solutions, as the array spacing is larger than the wavelengths involved. Using the knowledge that 2.5 Hz waves are generated by the power drop, the velocity of seismic noise waves in the East Mesa area is estimated to be 0.5 km/sec.

California↗

The San Andreas fault in the San Francisco Bay region, California: Structure and kinematics of a Young plate boundary

Recently acquired high-resolution aeromagnetic data delineate offset and/or truncated magnetic rock bodies of the Franciscan Complex that define the location and structure of, and total offset across, the San Andreas fault in the San Francisco Bay region. Two distinctive magnetic anomalies caused by ultramafic rocks and metabasalts east of, and truncated at, the San Andreas fault have clear counterparts west of the fault that indicate a total right-lateral offset of only 22 km on the Peninsula segment, the active strand that ruptured in 1906. The location of the Peninsula segment is well defined magnetically on the northern peninsula where it goes offshore, and can be traced along strike an additional ~6 km to the northwest. Just offshore from Lake Merced, the inferred fault trace steps right (northeast) 3 km onto a nearly parallel strand that can be traced magnetically northwest more than 20 km as the linear northeast edge of a magnetic block bounded by the San Andreas fault, the Pilarcitos fault, and the San Gregorio-Hosgri fault zone. This right-stepping strand, the Golden Gate segment, joins the eastern mapped trace of the San Andreas fault at Bolinas Lagoon and projects back onshore to the southeast near Lake Merced. Inversion of detailed gravity data on the San Francisco Peninsula reveals a 3 km wide basin situated between the two strands of the San Andreas fault, floored by Franciscan basement and filled with Plio-Quaternary sedimentary deposits of the Merced and Colma formations. The basin, ~1 km deep at the coast, narrows and becomes thinner to the southeast along the fault over a distance of ~12 km. The length, width, and location of the basin between the two strands are consistent with a pull-apart basin formed behind the right step in the right-lateral strike-slip San Andreas fault system and currently moving southeast with the North American plate. Slight nonparallelism of the two strands bounding the basin (implying a small component of convergence with continued strike-slip movement) may explain the progressive narrowing of the basin to the southeast and the puzzling recent uplift of the Merced Formation in a predominantly extensional (pull-apart basin) setting. The 1906 San Francisco earthquake may have nucleated within the step-over region, and the step-over places a strand of the San Andreas fault 3 km closer to downtown San Francisco than previously thought.

International Geology Review↗

The geologic history of Redoubt Volcano, Alaska

Redoubt Volcano is a composite cone built on continental crust at the northeast end of the Aleutian arc. Magmas erupted at Redoubt are medium-K calc-alkaline basalts, andesites, and dacites. The eruptive history of the volcano can be divided into four parts: the early explosive stage, early cone-building stage, late cone-building stage, and post-glacial stage. The most silicic products of the volcano were erupted during the early explosive stage about 0.888 Ma and include pumiceous pyroclastic flow deposits, block-and-ash flow deposits, and a dome or shallow intrusive complex. Basalt and basaltic andesite lava flows and scoria and ash flows were produced during the early cone-building stage, which was underway by 0.340 Ma. During the late cone-building stage, andesitic lava flows and block-and-ash flows were emplaced. Airfall deposits produced during post-glacial eruptions are silicic andesite in composition. Since the early cone-building stage, magmas have become progressively more silicic, but none are as silicic as those in the early explosive stage. Limited Pb and Sr isotopic data suggest that Redoubt magmas were contaminated by North American continental crust. ?? 1994.

Journal of Volcanology and Geothermal Research↗

Velocity, water-quality, and bathymetric surveys of the Grays Landing and Maxwell Navigation Pools, and Selected Tributaries to the Monongahela River, Pennsylvania, 2010–11

The U.S. Geological Survey (USGS) conducted velocity, water-quality, and bathymetric surveys from spring 2010 to summer 2011 in the Grays Landing and Maxwell navigation pools of the Monongahela River, Pennsylvania, and selected tributaries in response to elevated levels of total dissolved solids (TDS) recorded in early September 2009. Velocity data were collected using an Acoustic Doppler Current Profiler. Water-quality surveys included the in-situ collection of specific-conductance, water-temperature, and turbidity data using a water-quality sonde. Additionally, discrete water samples were collected and analyzed for TDS, chloride, and sulfate. Bathymetric data were collected using an echo sounder, and the shoreline was delineated using a laser range finder and electronic compass. The data were geo-referenced using a differential global positioning system and navigational software. Horizontal (x, y) coordinates were referenced to the North American Datum of 1983. Depth (z) elevations were referenced to the North American Vertical Datum of 1988. The data are provided in electronic format (appendix 1) and may be downloaded and can be used in a geographic information system for cartographic display and data analysis.

Pennsylvania↗

Geology of Seattle, a field trip

Seattle’s geologic record begins with Eocene deposition of fluvial arkosic sandstone and associated volcanic rocks of the Puget Group, perhaps during a time of regional strike-slip faulting, followed by late Eocene and Oligocene marine deposition of the Blakeley Formation in the Cascadia forearc. Older Quaternary deposits are locally exposed. Most of the city is underlain by up to 100 m of glacial drift deposited during the Vashon stade of Fraser glaciation, 18–15 cal k.y. B.P. Vashon Drift includes lacustrine clay and silt of the Lawton Clay, lacustrine and fluvial sand of the Esperance Sand, and concrete-like Vashon till. Mappable till is absent over much of the area of the Vashon Drift. Peak local ice thickness was 900 m. Isostatic response to this brief ice loading was significant. Upon deglaciation, global ice-equivalent sea level was about −100 m and local RSL (relative sea level) was 15–20 m, suggesting a total isostatic depression of ~115–120 m at Seattle. Subsequent rapid rebound outstripped global sea-level rise to result in a newly recognized marine low-stand shoreline at −50 m. The Seattle fault is a north-verging thrust or reverse fault with ~7.5 km of throw. Conglomeratic Miocene strata may record initiation of shortening. Field relations indicate that fault geometry has evolved through three phases. At present, the north-verging master fault is blind, whereas several surface-rupturing faults above the master fault are south verging. The 900–930 A.D. Restoration Point earthquake raised a 5 km × 35 km (or larger) area as much as 7 m. The marine low-stand shoreline is offset by a similar amount, thus there has been only one such earthquake in the last ~11 k.y. Geomorphology is largely glacial: an outwash plain decorated with ice-molded flutes and large, anastomosing tunnel valleys carved by water flowing beneath the ice sheet. Euro-Americans initially settled here because of landscape features formed by uplift in the Restoration Point earthquake. But steep slopes and tide flats were not conducive to commerce: starting in the 1890s and ending in the 1920s, extensive regrading removed hills, decreased slopes, and filled low areas. In steep slopes the glacial stratigraphy is prone to landslides when saturated by unusually wet winters. Seismic hazards comprise moderately large (M 7) earthquakes in the Benioff zone 50 km and more beneath the city, demi-millennial M 9 events on the subduction zone to the west, and infrequent local crustal earthquakes (M 7) that are likely to be devastating because of their proximity. Seismic shaking and consequent liquefaction are of particular concern in Pioneer Square, SoDo, and lower Duwamish neighborhoods, which are largely built on unengineered fill that was placed over estuarine mud. Debris from past Mount Rainier lahars has reached the lower Duwamish valley and a future large lahar could pose a sedimentation hazard.

Washington↗

A speculative history of the San Andreas fault in the central Transverse Ranges, California

It is generally accepted that the San Andreas fault formed between 4 and 5 Ma and that rocks west of it are now part of the Pacific plate, moving northwest relative to North America at 5 to 6 cm/yr. This model is inconsistent with the geologic record in the central Transverse Ranges. Right-lateral shear began in the vicinity of the San Andreas fault system in early Miocene time. The San Andreas fault system in the central Transverse Ranges has since evolved through three major phases; this development has led to a generally simpler, more throughgoing main trace. Slip rates on the San Andreas system were about 1 cm/yr in the Miocene, increasing to their current level of 3.5 cm/yr between 4 and 5 Ma. The modern San Andreas fault still only accounts for just over half the current relative plate rate and retains kinematic complexities inherited from its earliest geometry. The Early San Andreas transform system originated during early Miocene time in one of three transtensive zones that lay interior to the continent and east of the locus of transform motion between the Pacific and North American plates. The current three-fold division of motion in the plate boundary between the San Andreas fault, a coastal system, and an eastern California system dates to this time, as does the “anomalous” trend of the San Andreas fault through the Transverse Ranges. Basins and volcanic centers associated with this transtensive zone became dismembered as faults became integrated into a throughgoing system. Early motion led to juxtaposition of different rocks across faults now recognized as part of the Early San Andreas transform system, and to the development of sedimentary provincialism associated with uplift along the fault zone. Middle Miocene basins, including the Caliente, Cajon, Crowder, and Santa Ana basins that had previously received most of their sediments from sources far to the east, began to reflect local Transverse Ranges provenance. At least 100 km of slip is associated with the Early San Andreas transform system during early and middle Miocene time. Slip across the geometrically complex late Miocene San Gabriel transform system—which includes the San Gabriel, Cajon Valley, and early Punchbowl faults—produced uplift in the proto-Transverse Ranges at a postulated restraining bend in the fault system. Compressional structures associated with this restraining bend include the Squaw Peak and Liebre Mountain thrusts, related east-striking late Miocene reverse faults and folds, and, perhaps, northeast-striking left-lateral faults in the San Gabriel Mountains. Narrow fault-controlled basins formed during this period, including the Ridge basin, Devil’s Punchbowl basin, Mill Creek basin, and part of the Santa Ana Sandstone basin. Offset of structures and relief associated with the proto-Transverse Ranges provides the best evidence for late Miocene restorations of the modern San Andreas fault. As much as 60 km of offset is associated with the late Miocene San Gabriel transform system. Between 4 and 5 Ma, the modern San Andreas fault became the dominant member of the plate boundary system, cutting through the proto-Transverse Ranges and connecting more northerly striking traces to the north and south. The slip rate across the San Andreas fault system accelerated from 1 cm/yr to its current slip rate of 3.5 cm/yr prior to 4 Ma. The Pliocene rocks in the central Transverse Ranges do not contain evidence for relief as great as that of late Miocene or Quaternary time. The Pliocene trace of the modern San Andreas fault may have temporarily “solved” the geometric problem that led to late Miocene uplift. About 90 km of right-lateral displacement occurred on the modern San Andreas fault during Pliocene time. During Quaternary time new regions of localized vertical deformation developed in the Transverse Ranges, apparently as the result of new geometric problems within the Pliocene solution to the restraining geometry of the fault system. Left-lateral motion on east-striking faults, probably due to a northward increase in Basin and Range extension, kinked the San Andreas fault at both ends of the Transverse Ranges, producing regions of extreme shortening and uplift. The development of young right-lateral faults through the Peninsular Ranges, including the San Jacinto and Elsinore faults, also contributed to renewed uplift in the Transverse Ranges. Sixty kilometers of right-lateral slip occurred across the San Andreas fault zone during Quaternary time.

California↗

Petrogenesis of postcollisional magmatism at Scheelite Dome, Yukon, Canada: Evidence for a lithospheric mantle source for magmas associated with intrusion-related gold systems

The type examples for the class of deposits termed intrusion-related gold systems occur in the Tombstone-Tungsten belt of Alaska and Yukon, on the eastern side of the Tintina gold province. In this part of the northern Cordillera, extensive mid-Cretaceous postcollisional plutonism took place following the accretion of exotic terranes to the continental margin. The most cratonward of the resulting plutonic belts comprises small isolated intrusive centers, with compositionally diverse, dominantly potassic rocks, as exemplified at Scheelite Dome, located in central Yukon. Similar to other spatially and temporally related intrusive centers, the Scheelite Dome intrusions are genetically associated with intrusion-related gold deposits. Intrusions have exceptional variability, ranging from volumetrically dominant clinopyroxene-bearing monzogranites, to calc-alkaline minettes and spessartites, with an intervening range of intermediate to felsic stocks and dikes, including leucominettes, quartz monzonites, quartz monzodiorites, and granodiorites. All rock types are potassic, are strongly enriched in LILEs and LREEs, and feature high LILE/HFSE ratios. Clinopyroxene is common to all rock types and ranges from salite in felsic rocks to high Mg augite and Cr-rich diopside in lamprophyres. Less common, calcic amphibole ranges from actinolitic hornblende to pargasite. The rocks have strongly radiogenic Sr (initial 87 Sr/ 86 Sr from 0.711-0.714) and Pb isotope ratios ( 206 Pb/ 204 Pb from 19.2-19.7), and negative initial ɛ Nd values (−8.06 to −11.26). Whole-rock major and trace element, radiogenic isotope, and mineralogical data suggest that the felsic to intermediate rocks were derived from mafic potassic magmas sourced from the lithospheric mantle via fractional crystallization and minor assimilation of metasedimentary crust. Mainly unmodified minettes and spessartites represent the most primitive and final phases emplaced. Metasomatic enrichments in the underlying lithospheric mantle are attributes of the ancient North American cratonic margin that appear to be essential prerequisites to this style of postcollisional magmatism and associated gold-rich fluid exsolution. This type of magmatic hydrothermal activity occurs in a very specific tectonic setting that typically sets intrusion-related gold deposits apart from orogenic gold deposits, which are synorogenic in timing and have no consistent direct relationship to such diverse and contemporaneous lithospheric mantle-derived magmas, although they too are commonly sited adjacent to lithospheric boundaries.

Yukon↗

Drainage infrastructure and groundwater system response to changes in sea level and precipitation, Broward County, Florida

Executive Summary Southeast Florida is highly susceptible to flooding because of its low topography and porous, highly permeable Biscayne aquifer. Rising seas will likely result in increased groundwater levels in parts of Broward County, Florida, that will reduce available soil storage and therefore increase the likelihood of inundation and flooding from precipitation events. Moreover, rising seas may also reduce the capacity of the coastal water-control structures to discharge inland waters to tidal areas, thereby increasing surface-water stage and nearby groundwater levels. Increased rainfall intensity will likely further increase peak surface-water stages and groundwater levels, more quickly fill the reduced soil storage capacity, and increase the likelihood for inundation. Managers and planners in Broward County, Florida, face the challenge of understanding and preparing for the consequent risk to residents, businesses, and critical infrastructure posed by increased sea level and precipitation. The U.S. Geological Survey, in cooperation with the Broward County Environmental Planning and Resilience Division, has developed a groundwater/surface-water model to evaluate the response of the drainage infrastructure and groundwater system in Broward County to projected increases in sea level and potential changes in precipitation. The model was constructed using Modular Finite-Difference Groundwater Flow Model Newton formulation, with the surface-water system represented using the Surface-Water Routing process and the Urban Runoff process. The aquifer layering and flow parameters rely heavily on existing hydrologic flow models developed by the U.S. Geological Survey for the same model area. The surface-water drainage system within this newly developed model actively simulates the extensive canal network using level-pool routing and active structures representing gates, weirs, culverts, and pumps. Steady-state and transient simulation results represented historical conditions (2013–17). The simulated historical groundwater levels and upstream stage and flow at the primary structures generally captured the behavior of the actual hydrologic system. Simulation results incorporating increased sea level and precipitation were used to evaluate the effects of these projected changes on the surface-water drainage system and wet season groundwater levels. Four future sea-level scenarios were simulated by modifying the historical inputs for both steady-state and the transient versions of the model to represent mean sea levels of 0.5, 2.0, 2.5, and 3.0 feet (ft) above the North American Vertical Datum of 1988. These mean sea levels correspond to sea-level rises of 1.05, 2.55, 3.05, and 3.55 ft, respectively, above the 2013–17 mean measured tidal stage. Additional simulations represented a 15-percent increase in rainfall rates using the transient model and a 15-percent increase in rainfall recharge using the steady-state model. The simulated results indicated that (1) the effects of increased sea level were more evident in the easternmost, coastal areas of the county where increases in groundwater levels are nearly equivalent to sea-level rise; (2) groundwater levels west of the coastal water-control structures only changed slightly in response to increased sea level for most scenarios; (3) when the control elevations of the gravity-controlled coastal water-control structures were surpassed by sea-level rise, the resulting increases in upstream stage in the connected primary canal resulted in increased groundwater levels that can propagate into the western parts of the county; (4) the historical west-to-east downward gradient in groundwater levels decreased with increased sea level, and groundwater levels were lower in central parts of the county than areas west and east for the higher sea-level scenarios; (5) simulated upstream stage for most of the primary coastal water-control structures increased with increased sea level, with the largest increases occurring at gravity-controlled structures having the lowest control elevations; (6) total flow through the primary structures increased as sea level increased because of additional groundwater leakage into the surface-water network; (7) the 3.0-ft mean sea-level rise scenario resulted in an increase of 37.10 square miles in area having a wet season average depth to groundwater of less than 2 ft, and an increase of 22.84 square miles in newly inundated areas compared to historical simulation results; and (8) a 15-percent increase in rainfall rate for the entire simulation period produced little increase in upstream stages at the primary structures and an increase in total flow through the primary structures proportional to the increase in rainfall.

Florida↗

Slicing up the San Francisco Bay Area: Block kinematics and fault slip rates from GPS-derived surface velocities

Observations of surface deformation allow us to determine the kinematics of faults in the San Francisco Bay Area. We present the Bay Area velocity unification (BA??VU??, "bay view"), a compilation of over 200 horizontal surface velocities computed from campaign-style and continuous Global Positioning System (GPS) observations from 1993 to 2003. We interpret this interseismic velocity field using a three-dimensional block model to determine the relative contributions of block motion, elastic strain accumulation, and shallow aseismic creep. The total relative motion between the Pacific plate and the rigid Sierra Nevada/Great Valley (SNGV) microplate is 37.9 ?? 0.6 mm yr-1 directed toward N30.4??W ?? 0.8?? at San Francisco (??2??). Fault slip rates from our preferred model are typically within the error bounds of geologic estimates but provide a better fit to geodetic data (notable right-lateral slip rates in mm yr-1: San Gregorio fault, 2.4 ?? 1.0; West Napa fault, 4.0 ?? 3.0; zone of faulting along the eastern margin of the Coast Range, 5.4 ?? 1.0; and Mount Diablo thrust, 3.9 ?? 1.0 of reverse slip and 4.0 ?? 0.2 of right-lateral strike slip). Slip on the northern Calaveras is partitioned between both the West Napa and Concord/ Green Valley fault systems. The total convergence across the Bay Area is negligible. Poles of rotation for Bay Area blocks progress systematically from the North America-Pacific to North America-SNGV poles. The resulting present-day relative motion cannot explain the strike of most Bay Area faults, but fault strike does loosely correlate with inferred plate motions at the time each fault initiated. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

Report of committee on the chemistry of natural waters, 1941–42

The membership of the Committee during the past year was as follows: I. A. Dennison, National Bureau of Standards; C S. Howard (Chairman), Geological Survey; C. S. Scofield, Department of Agriculture; D. G. Thompson, Geological Survey; and T. G. Thompson, University of Washington, Seattle, Washington. SCOFIELD has continued his studies in connection with the salt balance in irrigated areas and has made progress‐reports to interested parties concerning the salt balance on the El Paso Project, Wapato Project, and the Yuma Project. These studies are of great interest to those responsible for the operation of the projects and should be of considerable value to other projects in indicating the volumes of water that may be necessary under certain conditions to insure proper drainage of the project.

Eos, Transactions, American Geophysical Union↗

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗

Geologic mapping of Europa

Galileo data enable the major geological units, structures, and surface features to be identified on Europa. These include five primary units (plains, chaos, band, ridge, and crater materials) and their subunits, along with various tectonic structures such as faults. Plains units are the most widespread. Ridged plains material spans a wide range of geological ages, including the oldest recognizable features on Europa, and appears to represent a style of tectonic resurfacing, rather than cryovolcanism. Smooth plains material typically embays other terrains and units, possibly as a type of fluid emplacement, and is among the youngest material units observed. At global scales, plains are typically mapped as undifferentiated plains material, although in some areas differences can be discerned in the near infrared which might be related to differences in ice grain size. Chaos material is composed of plains and other preexisting materials that have been severely disrupted by inferred internal activity; chaos is characterized by blocks of icy material set in a hummocky matrix. Band material is arrayed in linear, curvilinear, wedge-shaped, or cuspate zones with contrasting albedo and surface textures with respect to the surrounding terrain. Bilateral symmetry observed in some bands and the relationships with the surrounding units suggest that band material forms by the lithosphere fracturing, spreading apart, and infilling with material derived from the subsurface. Ridge material is mapped as a unit on local and some regional maps but shown with symbols at global scales. Ridge material includes single ridges, doublet ridges, and ridge complexes. Ridge materials are considered to represent tectonic processes, possibly accompanied by the extrusion or intrusion of subsurface materials, such as diapirs. The tectonic processes might be related to tidal flexing of the icy lithosphere on diurnal or longer timescales. Crater materials include various interior (smooth central, rough inner, and annular massif) and exterior (continuous ejecta) subunits. Structural features and landforms are shown with conventional symbols. Type localities for the units are identified, along with suggestions for portraying the features on geological maps, including colors and letter abbreviations for material units. Implementing these suggestions by the planetary mapping community would facilitate comparisons of maps for different parts of Europa and contribute to an eventual global synthesis of its complex geology. On the basis of initial mapping results, a stratigraphic sequence is suggested in which ridged plains form the oldest unit on Europa, followed by development of band material and individual ridges. Band materials tend to be somewhat older than ridges, but in many areas the two units formed simultaneously. Similarly, the formation of most chaos follows the development of ridged plains; although chaos is among the youngest materials on Europa, some chaos units might have formed contemporaneously with ridged plains. Smooth plains generally embay all other units and are late-stage in the evolution of the surface. C1 craters are superposed on ridged plains but are crosscut by other materials, including bands and ridges. Most c2 craters postdate all other units, but a few c2 craters are cut by ridge material. C3 craters constitute the youngest recognizable material on Europa. Copyright 2000 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

California State Waters Map Series — Offshore of Fort Ross, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Fort Ross map area is located in northern California, on the Pacific coast of Sonoma County, about 90 km north of San Francisco and 60 km south of Point Arena. The onshore part of the map area is largely undeveloped, used primarily for grazing and recreation; the small town of Jenner (population, 136), located at the mouth of the Russian River, is the largest cultural center. The coast and shoreline are rugged and scenic, characterized by rocky promontories, kelp-rich coves, and nearshore rocks and sea stacks. U.S. Highway 1 extends along the coast through the map area, crossing the Russian River and passing through Sonoma Coast State Park and Fort Ross State Historic Park. The Offshore of Fort Ross map area is cut by the northwest-striking San Andreas Fault, the right-lateral transform boundary between the North American and Pacific plates. The fault intersects the shoreline a few kilometers south of Fort Ross at Timber Gulch, and it juxtaposes Jurassic, Cretaceous, Paleocene, and Eocene rocks of the Franciscan Complex to the northeast and Tertiary sedimentary rocks to the southwest. In this area, the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr. The devastating great 1906 California earthquake (M7.8) is thought to have nucleated on the San Andreas Fault offshore of San Francisco, about 90 km to the south, with the rupture extending northward through the Offshore of Fort Ross map area to the south flank of Cape Mendocino. Approximately 3.6 m of lateral offset occurred at Timber Gulch during this event. The San Andreas Fault has an important influence on coastal geomorphology. The coastline in the northern part of the map area, southwest of the onshore San Andreas Fault, is characterized by steep shoreline bluffs and as many as four uplifted, relatively flat marine terraces that range in elevation from about 15 to 100 m. Northeast of the San Andreas Fault, about 12 km of coastline is marked by steep, landslide-prone cliffs that commonly are 200 to 300 m high. The mouth of the Russian River and its estuary cut through the steep coastal topography in the southern part of the Offshore of Fort Ross map area. The Russian River drains a large watershed (3,470 km 2 ), and it has an annual discharge of about 2 km 3 (1,600,000 acre-feet) and an annual sediment load of about 900,000 metric tons. The map area is part of the Russian River littoral cell, in which the predominant longshore drift is to the south. Small pocket beaches are most common along the shoreline, but longer linear beaches are present near the mouth of the Russian River. The seafloor in the north half of the map area is characterized by rocky outcrops of Tertiary sedimentary rocks. The rugged nearshore zone and the inner shelf area (to water depths of about 50 m) typically slopes gently seaward, whereas the smooth midshelf area within California’s State Waters (about 50 to 85 m deep) is relatively flat. In contrast, the nearshore to midshelf area in the south half of the map area, which lies directly offshore of the mouth of the Russian River, has a more uniform, relatively flat slope. Shallow-marine and shelf sediments were deposited in the last about 21,000 years during the sea-level rise that followed the Last Glacial Maximum (LGM). Sea level was about 125 m lower than present during the LGM, at which time the entire Offshore of Fort Ross map area was emergent and the shoreline was about 20 km west of its present location. Circulation over the continental shelf in the map area (and in the broader northern California region) is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Throughout the year, this part of the northern California coast is exposed to four wave climate regimes: the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months (typically November through March). During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore of Central America. Northwest wind waves affect the coast throughout the year, whereas local wind waves are most common from October to April. Potential marine benthic habitat types in the Offshore of Fort Ross map area include unconsolidated continental-shelf sediments, mixed continental-shelf substrate, and hard continental-shelf substrate. Rocky shelf outcrops and rubble are considered the primary habitat type for rockfish and lingcod, both of which are recreationally and commercially important species.

California↗