Search USGS⌕ Search

SEARCH · Search USGS

Results for “Preliminary Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources
USGS1976

Preliminary study of wastewater movement in Yellowstone National Park, Wyoming, July 1975 through September 1976

This report describes a study by the U.S. Geological Survey in cooperation with the National Park Service to determine the effects on nearby lakes and streams of wastewater effluents that percolate from sewage lagoons at four sites in Yellowstone National Park. A network of observation wells has been established near the sites, and data have been collected from the wells and from nearby streams. Ground-water mounds have built up under the lagoons as percolation of effluents occurred. Percolating effluents mix with ground water and form plumes of ground water that contain chemical constituents for the effluents. Each plume tends to move down the hydraulic gradient in a direction generally perpendicular to the water-level contours. Water-level contours and most likely areas of movement of the plumes are shown on maps. Tests using rhodamine WT dye and dissolved solids as tracers suggested that chemical constituents in the plumes travel at different velocities as a result of dispersion and adsorlption. Chemical constituents from effluent percolating from the Old Faithful lagoons probably discharge into nearby Iron Spring Creek. Constituents from lagoons at the other three sites studied probably have not reached nearby streams or lakes. (Woodard-USGS)

Open-File Report↗
USGS1981

Preliminary design study for a National Digital Seismograph Network

Recently, the National Research Council published a report by the Panel on National, Regional, and Local Seismograph Networks of the Committee on Seismology in which the principal recommendation was for the establishment of a national digital seismograph network (NDSN). The Panel Report (Bolt, 1980) addresses both the need and the scientific requirements for the new national network. The purpose of this study has been to translate the scientific requirements into an instrumentation concept for the NSDS. There are literally hundreds, perhaps thousands, of seismographs in operation within the United States. Each serves an important purpose, but most have limited objectives in time, in region, or in the types of data that are being recorded. The concept of a national network, funded and operated by the Federal Government, is based on broader objectives that include continuity of time, uniform coverage, standardization of data format and instruments, and widespread use of the data for a variety of research purposes. A national digital seismograph network will be an important data resource for many years to come; hence, its design is likely to be of interest to most seismologists. Seismologists have traditionally been involved in the development and field operation of seismic systems and thus have been familiar with both the potential value and the limitations of the data. However, in recent years of increasing technological sophistication, the development of data sstems has fallen more to system engineers, and this trend is likely to continue. One danger in this is that the engineers may misinterpret scientific objectives or subordinate them to purely technological considerations. Another risk is that the data users may misuse or misinterpret the data because they are not aware of the limitations of the data system. Perhaps the most important purpose of a design study such as this is to stimulate a dialogue between system engineers and potential data users. The NDSN system concept presented in this report is intended to serve as a point of discussion -- a strawman, if you will. It is a feasible solution to what we perceive to be the objectives of the NDSN, but it is not a unique solution. Current technology offers a variety of choices in meeting design objectives. We have examined some but not all of these choices. Although our fundamental concept of the NDSN is based on current technology, we have anticipated developments in several fields where state-of-the-art is evolving rapidly, notably satellite communications and database management. If the installation of the NDSN is delayed 5 - 10 years, we anticipate that the methods proposed to record, communicate, and manage the data may change, but it is likely that the fundamental data requirements will be the same. Therefore, in this study we have concentrated more on the types of data that will be generated at the NDSN stations and less on specific hardware that might be used in the data system. When the NDSN is budgeted, a second, more hardware-oriented design study may be needed.

Open-File Report↗
USGS1996

Preliminary investigation of the distribution and resources of coal in the Kaiparowits Plateau, southern Utah

This report on the coal resources of the Kaiparowits Plateau, Utah is a contribution to the U.S. Geological Survey's (USGS) 'National Coal Resource Assessment' (NCRA), a five year effort to identify and characterize the coal beds and coal zones that could potentially provide the fuel for the Nation's coal-derived energy during the first quarter of the twenty-first century. For purposes of the NCRA study, the Nation is divided into regions. Teams of geoscientists, knowledgeable about each region, are developing the data bases and assessing the coal within each region. The five major coal-producing regions of the United States under investigation are: (1) the Appalachian Basin; (2) the Illinois Basin; (3) the Gulf of Mexico Coastal Plain; (4) the Powder River Basin and the Northern Great Plains; and (5) the Rocky Mountains and the Colorado Plateau. Six areas containing coal deposits in the Rocky Mountain and Colorado Plateau Region have been designated as high priority because of their potential for development. This report on the coal resources of the Kaiparowits Plateau is the first of the six to be completed. The coal quantities reported in this study are entirely 'resources' and represent, as accurately as the data allow, all the coal in the ground in beds greater than one foot thick. These resources are qualified and subdivided by thickness of coal beds, depth to the coal, distance from known data points, and inclination (dip) of the beds. The USGS has not attempted to estimate coal 'reserves' for this region. Reserves are that subset of the resource that could be economically produced at the present time. The coal resources are differentiated into 'identified' and 'hypothetical' following the standard classification system of the USGS (Wood and others, 1983). Identified resources are those within three miles of a measured thickness value, and hypothetical resources are further than three miles from a data point. Coal beds in the Kaiparowits Plateau are laterally discontinuous relative to many other coal bearing regions of the United States. That is, they end more abruptly and are more likely to fragment or split into thinner beds. Because of these characteristics, the data from approximately 160 drill holes and 40 measured sections available for use in this study are not sufficient to determine what proportion of the resources is technologically and economically recoverable. The Kaiparowits Plateau contains an original resource of 62 billion short tons of coal in the ground. Original resource is defined to include all coal beds greater than one foot thick in the area studied. None of the resource is recoverable by surface mining. However, the total resource figure must be regarded with caution because it does not reflect geologic, technological, land-use, and environmental restrictions that may affect the availability and the recoverability of the coal. At least 32 billion tons of coal are unlikely to be mined in the foreseeable future because the coal beds are either too deep, too thin to mine, inclined at more than 12?, or in beds that are too thick to be completely recovered in underground mining. The estimated balance of 30 billion tons of coal resources does not reflect land use or environmental restrictions, does not account for coal that would be bypassed due to mining of adjacent coal beds, does not consider the amount of coal that must remain in the ground for roof support, and does not take into consideration the continuity of beds for mining. Although all of these factors will reduce the amount of coal that could be recovered, there is not sufficient data available to estimate recoverable coal resources. For purposes of comparison, studies of coal resources in the eastern United States have determined that less than 10 percent of the original coal resource, in the areas studied, could be mined economically at today's prices (Rohrbacher and others, 1994).

Open-File Report↗
USGS1996

Preliminary investigations of the distribution and resources of coal in the Kaiparowits Plateau, southern Utah

This report on the coal resources of the Kaiparowits Plateau, Utah is a contribution to the U.S. Geological Survey’s (USGS) “National Coal Resource Assessment” (NCRA), a five year effort to identify and characterize the coal beds and coal zones that could potentially provide the fuel for the Nation’s coal-derived energy during the first quarter of the twenty-first century. For purposes of the NCRA study, the Nation is divided into regions. Teams of geoscientists, knowledgeable about each region, are developing the data bases and assessing the coal within each region. The five major coal-producing regions of the United States under investigation are: (1) the Appalachian Basin; (2) the Illinois Basin; (3) the Gulf of Mexico Coastal Plain; (4) the Powder River Basin and the Northern Great Plains; and (5) the Rocky Mountains and the Colorado Plateau. Six areas containing coal deposits in the Rocky Mountain and Colorado Plateau Region have been designated as high priority because of their potential for development. This report on the coal resources of the Kaiparowits Plateau is the first of the six to be completed.

Utah↗
USGS2007

USGS national surveys and analysis projects: Preliminary compilation of integrated geological datasets for the United States: A section in Digital mapping techniques '06 - Workshop proceedings

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for regional and national digital geologic maps attributed with age and rock type information. Such spatial data can be conveniently used to generate derivative maps for purposes that include mineral-resource assessment, metallogenic studies, tectonic studies, human health and environmental research. In 1997, the United States Geological Survey’s Mineral Resources Program initiated an effort to develop national digital databases for use in mineral resource and environmental assessments. One primary activity of this effort was to compile a national digital geologic map database, utilizing state geologic maps, to support mineral resource studies in the range of 1:250,000- to 1:1,000,000-scale. Over the course of the past decade, state databases were prepared using a common standard for the database structure, fields, attributes, and data dictionaries. As of late 2006, standardized geological map databases for all conterminous (CONUS) states have been available on-line as USGS Open-File Reports. For Alaska and Hawaii, new state maps are being prepared, and the preliminary work for Alaska is being released as a series of 1:500,000-scale regional compilations. See below for a list of all published databases.

Open-File Report↗
USGS1968

Water resources inventory of Connecticut Part 3: lower Thames and southeastern coastal river basins

The lower Thames and southeastern coastal river basins have a relatively abundant supply of water of generally good quality which is derived from streams entering the area and precipitation that has fallen on the area. Annual precipitation has ranged from about 32 inches to 65 inches and has averaged about 48 inches over a 30-year period. Approximately 22 inches of water are returned to the atmosphere each year by evaporation and transpiration; the remainder of the annual precipitation either flows overland to streams or percolates downward to the water table and ultimately flows out of the report area through estuaries and coastal streams or as underflow through the deposits beneath. During the autumn and winter months precipitation normally is sufficient to cause a substantial increase in the amount of water stored underground and in surface reservoirs within the report area, whereas in the summer most of the precipitation is lost through evaporation and transpiration, resulting in sharply reduced stream-flow and lowered ground-water levels. The mean monthly storage of water on an average is about 3.8 inches higher in November than it is in June. The amount of water that flows through and out of the report area represents the total amount of water potentially available for use by man. For the 30-year period 1931 through 1960, the annual runoff from the report area has averaged nearly 26 inches (200 billion gallons), from the entire Thames River basin above Norwich about 24 inches (530 billion gallons), and from the Pawcatuck River basin about 26 inches (130 billion gallons). A total average annual runoff of 860 billion gallons is therefore available. Although runoff indicates the total amount of water potentially available, it is usually not economically feasible for man to use all of it. On the other hand, with increased development, it is possible that some water will be reused several times. The water available may be tapped as it flows through the area or is temporarily stored in streams, lakes, and aquifers. The amounts that can be developed vary from place to place and time to time, depending on the amount of precipitation, on the size of drainage area, on the thickness, permeability, and areal extent of aquifers, and on the variations in chemical and physical quality of the water. Differences in streamflow from point to point are due primarily to differences in the proportion of stratified drift in the drainage basin above each point, which affect the timing of streamflow, and to differences in precipitation, which affect the amount of streamflow. Ground water can be obtained from wells almost anywhere in the area, but the amount obtainable at any particular point depends upon the type and water-bearing properties of the aquifers. For practical purposes, the earth materials in the report area comprise three aquifers--stratified drift, bedrock, and till. Stratified drift is the only aquifer generally capable of yielding more than 100 gpm (gallons per minute) to individual wells. It covers about 20 percent of the area and occurs chiefly in lowlands where it overlies till and bedrock. The coefficient of permeability of the coarse-grained unit of stratified drift averages about 1,500 gbd (gallons per day) per sq ft. Drilled, screened wells tapping this unit are known to yield from 4 to 88o gpm and average 146 gpm. Dug wells in coarse-grained stratified drift supply about 2 gpm per foot of drawdown over a period of a few hours. Fine-grained stratified drift has an average coefficient of permeability of about 300 gpd per sq ft and can usually yield supplies sufficient for household use to dug wells. Bedrock and till are widespread in extent but generally provide only small water supplies. Bedrock is tapped chiefly by drilled wells, about 90 percent of which will supply at least 3 gpm. Very few, however, will supply more than 50 gpm. Till is tapped in a few places by dug wells which can yield small supplies of only a few hundred gpd throughout all or most of the year. The coefficient of permeability of till ranges from about 0.2 gpd per sq ft to 120 gpd per sq ft. The amount of ground water potentially available in the report area depends upon the amount of ground-water outflow, the amount of ground water in storage, and the quantity of water available by induced infiltration from streams and lakes. From data on permeability, saturated thickness, recharge, yield from aquifer storage, well performance, and streamflow, preliminary estimates of ground-water availability can be made for any point in the report area. Long-term yields estimated for 18 areas of stratified drift especially favorable for development of large ground-water supplies ranged from 1.3 to 66 mgd. Detailed site studies to determine optimum yields, drawdowns, and spacing of individual wells are needed before major ground-water development is undertaken in these or other areas. The chemical quality of water in the report area is generally good to excellent. Samples of naturally occurring surface water collected at 24 sites contained less than 151 ppm (parts per million) of dissolved solids and less than 63 ppm of hardness. Water from wells is more highly mineralized than naturally occurring water from streams. Even so only 12 percent of the wells sampled yielded water with more than 200 ppm of dissolved solids and only 8 percent yielded water with more than 120 ppm of hardness. Even in major streams, which are used to transport industrial waste, hardness rarely exceeds 60 ppm and the dissolved mineral content is generally less than 200 ppm. At a few places in the town of Montville however, waters may contain dissolved mineral concentrations of 2,000 to 4,000 ppm. Iron and manganese in both ground water and surface water are the only constituents whose concentrations commonly exceed recommended limits for domestic and industrial use. Most wells in the report area yield clear water with little or no iron or manganese, but distributed among them are wells yielding ground water that contains enough of these dissolved constituents to be troublesome for most uses. Iron concentrations in naturally occurring stream water exceed 0.3 ppm under low-flow conditions at 33 percent of the sites sampled. Large concentrations of iron in stream water result from discharge of iron-bearing water from aquifers or from swamps where it is released largely from decaying vegetation. Ground water more than 30 feet below the land surface has a relatively constant temperature, usually between 48°F and 52°F. Water temperature in very shallow wells may fluctuate from about 38°F in February or March to about 55°F in late summer. Water temperature in the larger streams fluctuates much more widely, ranging from 32°F at least for brief periods in winter, to about 85°F occasionally during summer. The quality of suspended sediment transported by streams in the area is negligible. Turbidity in streams is generally not a problem although amounts large enough to be troublesome may occur locally at times. The total amount of water used in the report area for all purposes during 1964 was about 118,260 million gallons, of which 105,600 million gallons was estuarine water used for cooling by industry. The average per capita water use, excluding estuarine, temporary summer residence, and institutional water was equivalent to 186 gpd. Public water systems supplied the domestic needs of nearly tw0-thirds the population of the report area. All of the 19 systems, which were sampled, provided water of better quality than the U.S. Public Health Service suggests for drinking water standards.

Connecticut↗
USGS1962

Notes on earth fissures in southern Arizona

This report describes earth fissures at six sites in southern Arizona. These notes are preliminary to a more extensive study and detailed analysis being prepared by hydrologists in the Water Resources Division. Earth fissures were first recorded in Arizona in 1927, and have been noticed with increasing frequency since 1949. Fissures at Black Canyon, Bowie, Chandler Heights, Luke Air Force Base, Picacho, and Sells are discussed and illustrated with photographs.

Circular↗
USGS2013

Preliminary stratigraphy and facies analysis of the Upper Cretaceous Kaguyak Formation, including a brief summary of newly discovered oil stain, upper Alaska Peninsula

The Alaska Division of Geological and Geophysical Surveys has an ongoing program aimed at evaluating the Mesozoic forearc stratigraphy, structure, and petroleum systems of lower Cook Inlet. Most of our field studies have focused on the Jurassic component of the petroleum system[this report.] However, in late July and early August of 2012, we initiated a study of the stratigraphy and reservoir potential of the Upper Cretaceous Kaguyak Formation. The Kaguyak Formation is locally well exposed on the upper Alaska Peninsula (fig. 25) and was named by Keller and Reiser (1959) for a sequence of interbedded siltstone and sandstone of upper Campanian to Maastrichtian age that they estimated to be 1,450 m thick.Subsequent work by Detterman and Miller (1985) examined 900 m of section and interpreted the unit as the record of a prograding submarine fan.This interpretation of deep-water deposition contrasts with other Upper Cretaceous rocks exposed along the Alaska Peninsula and lower Cook Inlet that are generally described as nonmarine to shallow marine (Detterman and others, 1996; LePain and others, 2012).Based on foraminifera and palynomorphs from the COST No. 1 well, Magoon (1986) concluded that the Upper Cretaceous rocks were deposited in a variety of water depths and environments ranging from upper bathyal to nonmarine. During our recent fieldwork west and south of Fourpeaked Mountain, we similarly encountered markedly varying lithofacies in the Kaguyak Formation (fig. 25), and we also found oil-stained rocks that are consistent with the existence of an active petroleum system in Upper Cretaceous rocks on the upper Alaska Peninsula and in lower Cook Inlet. These field observations are summarized below.

Alaska↗
USGS2005

South San Francisco Bay 2004 topographic lidar survey: Data overview and preliminary quality assessment

Tidal wetlands in South San Francisco Bay (South Bay) have decreased by over 80% in the past 150 years. The California Coastal Conservancy, in conjunction with other state and federal agencies, is collaboratively managing an effort to restore approximately 61 km 2 (15,100 acres) of commercial salt evaporation ponds in South Bay to mixed intertidal habitat. In order to best develop restoration strategies, as well as to track morphologic change throughout the restoration process, a topographic lidar survey was conducted in May of 2004. The survey collected more than 250 million elevation points in a 334 km 2 area extending from just south of the San Francisco and Oakland airports to the Alviso salt ponds. This report details the collection of lidar in South Bay, the ground-truthing efforts, preliminary accuracy assessments, and known limitations of the data set. We describe the data generated from the survey and how to obtain it. In addition, we present maps and sample imagery that provides a revealing look into the intricate topographic features of South Bay.

California↗
USGS2021

California deepwater investigations and groundtruthing (Cal DIG) I: Fault and shallow geohazard analysis offshore Morro Bay

The California Deepwater Investigations and Groundtruthing (Cal DIG) I project focuses on the potential seafloor hazards and impacts of alternative energy infrastructure in the outer continental shelf region offshore of south-central California. This is one of three reports covering a single study area located between Monterey and Point Conception, California in federal waters outside of the State of California three nautical mile limit and in water depths of 400 to 1500 meters. The goal of this report is to provide baseline geologic interpretations of the area for the purpose of improving regional models of shallow geologic hazards and sedimentary processes. Geophysical and geological data from this project will help to address important issues associated with marine spatial planning and potential offshore infrastructure development, such as offshore floating wind turbines. Datasets covered in this report include comprehensive high-resolution sub-bottom (multi-channel and Chirp seismic reflection profiles), seafloor (bathymetry), and sampling (piston, gravity, and vibracore) data collected in 2018-2019 during a series of seven seagoing geological and geophysical surveys. Specifically, this report outlines interpretation of subsurface geologic structure from the geophysical data, details preliminary core analysis results related to fluid, gas, and sediment transport activity, provides interpretations of the current geohazards in the area, and suggests next steps for improving interpretations of geohazard processes. Specific targets of geohazard interest in the study area are geological structures such as faults and folds, seafloor pockmarks within a large field (the Big Sur pockmark field), submarine channels, and mass wasting (slope failure) features. The vast majority of faults and other structures in the study occur within sediment and rock formations we interpret to be pre-Quaternary (older than 2.58 Myr BP), and thus we interpret that these structures are unlikely to present significant current hazard to seabed infrastructure, although we note that the numerous structures mapped in the study area may have the potential to become reactivated. Similarly, we find no new evidence of Holocene (younger than 11,650 years BP) fluid or gas advection in the Big Sur pockmark field. However, such fluid and gas hazards are currently difficult to assess, as additional analyses and sampling of existing core data is needed to better understand pockmark formation processes and potential gas accumulations we have mapped in the subsurface. Mass wasting along the eastern and western edges of the Santa Lucia Bank during earthquakes, as well as sediment transport down the Lucia Chica and San Simeon channels, are among the most significant, although still likely infrequent during the Holocene, hazards to seabed stability in the study area. Further analyses of the existing cores, including radiocarbon dating, stable isotope, and compositional analyses, are again needed to better understand the timing and sources of the numerous sand deposits found throughout the study area, which may have been transported downslope due to mass wasting and/or earthquake shaking processes.

California↗
USGS2007

USGS national surveys and analysis projects: Preliminary compilation of integrated geological datasets for the United States

The growth in the use of Geographic nformation Systems (GS) has highlighted the need for regional and national digital geologic maps attributed with age and rock type information. Such spatial data can be conveniently used to generate derivative maps for purposes that include mineral-resource assessment, metallogenic studies, tectonic studies, human health and environmental research. n 1997, the United States Geological Survey’s Mineral Resources Program initiated an effort to develop national digital databases for use in mineral resource and environmental assessments. One primary activity of this effort was to compile a national digital geologic map database, utilizing state geologic maps, to support mineral resource studies in the range of 1:250,000- to 1:1,000,000-scale. Over the course of the past decade, state databases were prepared using a common standard for the database structure, fields, attributes, and data dictionaries. As of late 2006, standardized geological map databases for all conterminous (CONUS) states have been available on-line as USGS Open-File Reports. For Alaska and Hawaii, new state maps are being prepared, and the preliminary work for Alaska is being released as a series of 1:500,000-scale regional compilations. See below for a list of all published databases.

Conference Paper↗
USGS2010

Geophysical investigations at Hidden Dam, Raymond, California: Summary of fieldwork and data analysis

Geophysical field investigations have been carried out at the Hidden Dam in Raymond, California for the purpose of better understanding the hydrogeology and seepage-related conditions at the site. Known seepage areas on the northwest right abutment area of the downstream side of the dam are documented by Cedergren. Subsequent to the 1980 seepage study, a drainage blanket with a subdrain system was installed to mitigate downstream seepage. Flow net analysis provided by Cedergren suggests that the primary seepage mechanism involves flow through the dam foundation due to normal reservoir pool elevations, which results in upflow that intersects the ground surface in several areas on the downstream side of the dam. In addition to the reservoir pool elevations and downstream surface topography, flow is also controlled by the existing foundation geology as well as the presence or absence of a horizontal drain within the downstream portion of the dam. The purpose of the current geophysical work is to (1) identify present-day seepage areas that may not be evident due to the effectiveness of the drainage blanket in redirecting seepage water, and (2) provide information about subsurface geologic structures that may control subsurface flow and seepage. These tasks are accomplished through the use of two complementary electrical geophysical methods, self-potentials (SP) and direct-current (DC) electrical resistivity, which have been commonly utilized in dam-seepage studies. SP is a passive method that is primarily sensitive to active subsurface groundwater flow and seepage, whereas DC resistivity is an active-source method that is sensitive to changes in subsurface lithology and groundwater saturation. The focus of this field campaign was on the downstream area on the right abutment, or northwest side of the dam, as this is the main area of interest regarding seepage. Two exploratory self-potential lines were also collected on the downstream left abutment of the dam to identify potential seepage in that area. This report is primarily a summary of the field geophysical data acquisition, with some preliminary results and interpretation. Further work will involve a more rigorous analysis of the geophysical datasets and an examination of a large dataset of historical observations of water levels in a number of observation wells and piezometers compared with reservoir elevation. In addition, a partially saturated flow model will be developed to better understand seepage patterns given the available information about dam construction, geophysical results, and data from installed observation wells and piezometers.

California↗
USGS2003

Preliminary geologic map of the Fontana 7.5' quadrangle, Riverside and San Bernardino Counties, California

Open-File Report 03-418 is a digital geologic data set that maps and describes the geology of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California. The Fontana quadrangle database is one of several 7.5’ quadrangle databases that are being produced by the Southern California Areal Mapping Project (SCAMP). These maps and databases are, in turn, part of the nation-wide digital geologic map coverage being developed by the National Cooperative Geologic Map Program of the U.S. Geological Survey (USGS). General Open-File Report 03-418 contains a digital geologic map database of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file (fon_map.ps) to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. An Encapsulated PostScript (EPS) file (fon_grey.eps) created in Adobe Illustrator 10.0 to plot the geologic map on a grey topographic base, and containing a Correlation of Map Units (CMU), a Description of Map Units (DMU), and an index map. 4. Portable Document Format (.pdf) files of: a. the Readme file; includes in Appendix I, data contained in fon_met.txt b. The same graphics as plotted in 2 and 3 above.Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (4b above) or plotting the postscript files (2 or 3 above).

California↗
USGS1995

Preliminary geologic map of the Calabasas 7.5' quadrangle, southern California: A digital database

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. This digital map database is compiled from previously published sources combined with some new mapping and modifications in nomenclature. The geologic map database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U. S. Geological Survey. For detailed descriptions of the units, their stratigraphic relations and sources of geologic mapping consult Yerkes and Campbell (1993). More specific information about the units may be available in the original sources.

California↗
USGS1995

Preliminary geologic map of the Piru 7.5' quadrangle, southern California: A digital database

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. This digital map database is compiled from previously published sources combined with some new mapping and modifications in nomenclature. The geologic map database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U. S. Geological Survey. For detailed descriptions of the units, their stratigraphic relations and sources of geologic mapping consult Yerkes and Campbell (1995). More specific information about the units may be available in the original sources.

California↗
USGS1997

Preliminary geologic map of the Fillmore 7.5' quadrangle, Southern California: A digital database

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. This digital map database is compiled from previously published sources combined with some new mapping and modifications in nomenclature. The geologic map database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U. S. Geological Survey. For detailed descriptions of the units, their stratigraphic relations, sources of geologic mapping, and data on exploratory wells consult Yerkes and Campbell (1995), and Yerkes and Showalter (1990). More specific information about the units may be available in the original sources.

California↗
USGS1997

Preliminary geologic map of the Burbank 7.5' quadrangle, southern California: A digital database

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. This digital map database is compiled from previously published sources combined with some new mapping and modifications in nomenclature. The geologic map database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U. S. Geological Survey. For detailed descriptions of the units, their stratigraphic relations, sources of geologic mapping, and data on exploratory wells consult Yerkes (1996), and Yerkes and Showalter (1990). More specific information about the units may be available in the original sources.

California↗
USGS1997

Preliminary geologic map of the Moorpark 7.5' quadrangle, Southern California: A digital database

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. This digital map database is compiled from previously published sources combined with some new mapping and modifications in nomenclature. The geologic map database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U. S. Geological Survey. For detailed descriptions of the units, their stratigraphic relations, sources of geologic mapping, and data on exploratory wells consult Yerkes and Campbell (1995), and Yerkes and Showalter (1990). More specific information about the units may be available in the original sources.

California↗