Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources
USGS2021

Exploring GPS observations of postseismic deformation following the 2012 MW7.8 Haida Gwaii and 2013 MW7.5 Craig, Alaska Earthquakes: Implications for viscoelastic Earth structure

The Queen Charlotte-Fairweather Fault (QC-FF) system off the coast of British Columbia and southeast Alaska is a highly active dextral strike-slip plate boundary that accommodates ∼50 mm/yr of relative motion between the Pacific and North America plates. Nine M W ≥ 6.7 earthquakes have occurred along the QC-FF system since 1910, including a M S (G-R) 8.1 event in 1949. Two recent earthquakes, the October 28, 2012 Haida Gwaii ( M W 7.8) and January 5, 2013 Craig, Alaska ( M W 7.5) events, produced postseismic transient deformation that was recorded in the motions of 25 nearby continuous Global Positioning System (cGPS) stations. Here, we use 5+ yr of cGPS measurements to characterize the underlying mechanisms of postseismic deformation and to constrain the viscosity structure of the upper mantle surrounding the QC-FF. We construct forward models of viscoelastic deformation driven by coseismic stress changes from these two earthquakes and explore a large set of laterally heterogeneous viscosity structures that incorporate a relatively weak back-arc domain; we then evaluate each model based on its fit to the postseismic signals in our cGPS data. In determining best-fit model structures, we additionally incorporate the effects of afterslip following the 2012 event. Our results indicate the occurrence of a combination of temporally decaying afterslip and vigorous viscoelastic relaxation of the mantle asthenosphere. In addition, our best-fit viscosity structure (transient viscosity of 1.4–2.0 × 10 18 Pa s; steady-state viscosity of 10 19 Pa s) is consistent with the range of upper mantle viscosities determined in previous studies of glacial isostatic rebound and postseismic deformation.

Alaska, British Columbia↗
USGS2021

The proliferation of induced seismicity in the Permian Basin, Texas

The Permian Basin has a long history of induced earthquakes, but the seismicity rates have increased dramatically over the past two decades and included a M W 5.0 likely induced by wastewater disposal (WD) in March 2020. A detailed characterization of the proliferation of seismicity in the Permian Basin throughout this time period is needed for improving the scientific understanding of the mechanisms responsible and for mitigating future seismic hazard. Due to a sparse regional seismic network before the advent of Texas Seismological Network in 2017, we characterize seismicity using the 10-station TXAR array that is 100s of km away from most of the seismicity, with the objective of improving upon the substantial contributions from previous work. By exploiting the nature of waveform similarity, we detect events with template matching, performing a quantitative analysis of spatially varying detection capabilities throughout the study area. From an initial catalog of 10,753 events, we identify 45,009 earthquakes and 10,208 quarry blasts. Using our catalog of earthquakes, we improve epicentral locations, compare relative magnitude techniques, and associate earthquakes to WD or hydraulic stimulations. We further use our earthquake catalog to investigate the relationship between seismicity and human activities near the city of Pecos, Texas. Through a comparison of our earthquake catalog with industrial records, we determine that the vast majority seismicity near Pecos, Texas, since 2000 is likely induced by an increase of WD at wells injecting at depths greater than 1.5 km.

Texas↗
USGS2021

Crustal seismic attenuation of the central United States and Intermountain West

Seismic attenuation is generally greater in the western United States (WUS) than the central and eastern United States (CEUS), but the nature of this transition or location of this boundary is poorly constrained. We conduct crustal seismic (Lg) attenuation tomography across a region that stretches from the CEUS across the Rocky Mountains to the Basin and Range using a total of 115,870 amplitude measurements from 106 earthquakes recorded on 544 stations across five frequency bands spanning 0.5–16 Hz. Similar to previous studies, we find higher attenuation in the WUS ( Q 0 ∼ 190) than the nominally CEUS ( Q 0 ∼ 250) and comparatively high attenuation on the Gulf Coast ( Q 0 ∼ 175). Our models defy simple east versus west regionalization, however. Heterogeneity within the Rocky Mountain region—low attenuation in the Colorado Plateau interior and Wyoming Craton ( Q 0 ∼ 230) compared to high attenuation in the southern Rockies ( Q 0 ∼ 110)—exceeds the gross differences between the CEUS and western United States. These province-scale patterns are readily interpreted in terms of intrinsic attenuation. The boundary between the Colorado Plateau and Basin and Range hosts the highest attenuation imaged in the study area ( Q 0 ∼ 90), consistent with localized scattering across contrasting crustal structure. Focused high attenuation in the southern Rockies may represent the effects of represent in situ partial crustal melt. Within the CEUS, second-order bands of comparatively high attenuation align with the Proterozoic Yavapai-Mazatzal suture zone and Midcontinent Rift. This complex attenuation structure defies broad regionalization and suggests a need for path-specific models near these boundaries and for critical infrastructure.

Journal of Geophysical Research: Solid Earth↗
USGS2021

Does earthquake stress drop increase with depth in the crust?

We combine earthquake spectra from multiple studies to investigate whether the increase in stress drop with depth often observed in the crust is real, or an artifact of decreasing attenuation (increasing Q ) with depth. In many studies, empirical path and attenuation corrections are assumed to be independent of the earthquake source depth. We test this assumption by investigating whether a realistic increase in Q with depth (as is widely observed) could remove some of the observed apparent increase in stress drop with depth. We combine event spectra, previously obtained using spectral decomposition methods, for over 50,000 earthquakes (M0 to M5) from 12 studies in California, Nevada, Kansas and Oklahoma. We find that the relative high-frequency content of the spectra systematically increases with increasing earthquake depth, at all magnitudes. By analyzing spectral ratios between large and small events as a function of source depth, we explore the relative importance of source and attenuation contributions to this observed depth dependence. Without any correction for depth-dependent attenuation, we find a systematic increase in stress drop, rupture velocity, or both, with depth, as previously observed. When we add an empirical, depth-dependent attenuation correction, the depth dependence of stress drop systematically decreases, often becoming negligible. The largest corrections are observed in regions with the largest seismic velocity increase with depth. We conclude that source parameter analyses, whether in the frequency or time domains, should not assume path terms are independent of source depth, and should more explicitly consider the effects of depth-dependent attenuation.

Journal of Geophysical Research↗
USGS2021

Geodetic constraints on a 25-year magmatic inflation episode near Three Sisters, central Oregon

Crustal inflation near the Three Sisters volcanic center documented since the mid-1990s has persisted for more than two decades. We update past analyses of the event through 2020 by simultaneously inverting InSAR interferograms, GPS time series, and leveling data for time-dependent volcanic deformation source parameters. We explore several source models to estimate how the deformation rate varied through time and to identify parameters that can reproduce measured deformation. Our preferred model is a Mogi source 4.1 km below sea level (5.9 km below the surface) about 5 km west of the summit of South Sister. Inflation started in late 1995 or 1996; the rate increased rapidly during 1998–1999, and peaked in late 1999, resulting in maximum surface uplift of about 30 cm by mid-2020. Since 2000, the inflation rate generally declined exponentially with a time constant of about 6 years. Two source inflation scenarios fit the data equally well. In the first, the crust surrounding the source is elastic and the net source-volume increase, which we attribute to persistent magma input, has been about 49 × 10 6 m 3 . The second scenario adds a viscoelastic shell surrounding the Mogi source. In that case, an injection of about 21 × 10 6 m 3 of magma prior to 2000, followed by continuing relaxation of the viscoelastic shell, can account for most of the observed surface deformation. In both scenarios, modeling reveals quasiperiodic increases in the inflation rate (pulses) with a recurrence interval of 3–4 years, both before and after 2000.

Oregon↗
USGS2021

The finicky nature of earthquake shaking-triggered submarine sediment slope failures and sediment gravity flows

Since 2011, seafloor temperatures, pressures, and seismic ground motions have been measured by the seafloor cabled Dense Oceanfloor Network system for Earthquakes and Tsunamis (DONET) on the Nankai margin. These measurements, high-resolution bathymetry, and abundant contextual information make the DONET region seem ideally suited to provide constraints on seismic shaking-triggered sediment slope failures and gravity flows, particularly since numerous published studies have linked paleo- to modern earthquakes to failures and flows within the DONET. The occurrences of the local 2016 M6.0 Mie-ken and regional M7.0 Kumamoto earthquakes within and at regional distances, respectively, from the DONET data set provided an opportunity to explore this potential. We used DONET seismic recordings of the posited triggering shaking and to search for submarine slide signals and continuous temperature and pressure data to detect pulses of warm and densified water indicative of passing flows. We developed and applied a variety of analytical methods to eliminate signals generated by water column processes, while leaving slope failures and sediment gravity flow anomalies as residuals. Our explorations yielded no evidence that earthquake shaking initiated either phenomenon, which we suggest reflects the finicky nature both of the detection of and the physical processes that contribute to slope failures and flows (i.e., both require satisfying precise suites of conditions). Nonetheless, this negative result, our analyses, and the estimates of physical properties we derived for them, provide useful lessons and inputs for future studies.

Journal of Geophysical Research↗
USGS2022

Apparent age dependence of the fault weakening distance in rock friction

During rock friction experiments at large displacement, room temperature and humidity, and following a hold test, the fracture energy increases approximately as the square of the logarithm of hold duration. While it's been long known that failure strength increases with log hold time, here the slip weakening distance, d h , also increases. The weakening distance increase is large, hundreds of percent change over a few thousand seconds. The initial bare surface and simulated fault gouge experiments were conducted in rotary shear at 25 MPa normal stress, 21 MPa confining stress and at displacements greater than 100 mm. In contrast, initially bare surface experiments at 5 MPa normal stress, unconfined at displacements less than 10 mm show effectively no change in d h . We attribute the difference to the presence of an appreciable shear zone that develops due to wear over significant displacements, confined at elevated normal stress. Prior published studies of sheared simulated fault gouge at short displacement show both acknowledged and unacknowledged increases in d h that may relate to our observations. Since natural faults have well-developed shear zones, the observations have more direct relevance to earthquake nucleation than prior laboratory studies that use short displacement data and focus on frictional strength recovery alone. However, the physics underlying this increase in weakening distance are not known; candidates are compaction (Nakatani, 1998) and delocalization (Sleep et al., 2000). Additional caveats are that these are room temperature and humidity experiments, at a single normal stress that have not yet been reproduced in other laboratories.

Journal of Geophysical Research↗
USGS2022

Three Mw ≥ 4.7 earthquakes within the Changning (China) shale gas field ruptured shallow faults intersecting with hydraulic fracturing wells

From 2017 to 2019, three destructive earthquakes (27 January 2017 Mw 4.7, 16 December 2018 Mw 5.2, and 3 January 2019 Mw 4.8) occurred in the Changning shale gas field in the southwest Sichuan Basin, China. Previous seismological studies attributed these events to hydraulic fracturing (HF), but were unable to identify the causative seismogenic faults and their slip behaviors. Here, we use Sentinel-1 synthetic aperture radar data to measure surface deformation triggered by the three events and conduct geodetic inversions to characterize their rupture models. The resulting coseismic interferograms show prominent surface deformation with the maximum line-of-sight displacements of up to 4 cm. The inversion results show that all three earthquakes mainly ruptured sedimentary formations above the shale gas bed, in the upper 3 km of the crust, with slip magnitudes ranging from 8.5 to 15 cm, and stress drops ranging from ∼1.8 to ∼3.3 MPa. Their source faults intersect with horizontal HF wells, but do not root in the crystalline basement. Combined with the reported difficulty of increasing HF operation pressures prior to the three events, we argue that they were most likely induced by direct injection of pressurized fluids into the fault zones. Crustal deformation patterns inferred from regional topography and GPS velocities highlight that the Changning field is located within a triple junction region near the southeastern margin of the Tibetan Plateau with large deformation gradients; such conditions are not only favorable to the development of critically stressed faults, but also facilitate the occurrence of at least moderate magnitude earthquakes.

Changning shale gas field, Sichuan Basin↗
USGS2022

Possible effects of multiphase methane evolution during a glacial cycle on underpressure development in sedimentary basins: An analysis with application to the northeast Michigan Basin

In low-permeability systems, groundwater may be accompanied by separate-phase fluids, and measured pore water pressures may deviate from those expected in steady-state, single-phase systems. These same systems may be of interest for storage of nuclear waste in Deep Geologic Repositories. Therefore, it is important to understand the relationship between the presence of a separate phase and anomalous pressure development. At the Bruce site in Southern Ontario, a significant underpressure was observed, and there is evidence for the presence of gas-phase methane in situ. This study used a one-dimensional (vertical) numerical model of the subsurface down to a depth of 844 m beneath the Bruce site to evaluate possible effects of hydromechanical coupling with multiphase flow on pressure evolution during glacial loading and unloading. The simulated pressure conditions were affected strongly by the amount of methane initially present in the system, and the maximum simulated underpressure varied nonmonotonically with increasing initial methane content. When the initial methane content was below the solubility limit, exsolution led to underpressures that briefly exceeded those that formed in the single-phase case. At intermediate initial methane contents (sufficient to produce an immobile gas phase), the gas phase dampened the hydromechanical effects of the glacial cycle. At large initial methane contents (when a mobile gas phase was present), gas migration caused a large decrease in relative liquid permeability, which further contributed to underpressure development in the pore water. Multiple scenarios that spanned a range of initial methane contents yielded underpressures like those observed at the Bruce site.

Journal of Geophysical Research - Solid Earth↗
USGS2022

Earthquake-derived seismic velocity changes during the 2018 caldera collapse of Kīlauea volcano

The 2018 Kīlauea caldera collapse produced extraordinary sequences of seismicity and deformation, with 62 episodic collapse events which significantly altered the landscape of the summit region. Despite decades of focused scientific studies at Kīlauea, detailed information about the internal structure of the volcano is limited. Recently developed techniques in seismic interferometry can be used to monitor the internal structure of an active volcano more directly by detecting subtle spatiotemporal changes in seismic wave velocity, but their utility relies on accurate interpretations of the underlying phenomena causing those velocity changes. Here, we retrospectively apply repeating-earthquake-based seismic interferometry to the 2018 Kīlauea eruption sequence. We find that seismic velocities changed over two distinct time scales: a sudden increase followed by a slower decrease in velocity in the hours following each collapse event, and a gradual, long-term decrease in velocity over several weeks that ceased approximately 1 month prior to the end of the eruption. Modeling suggests that short-term changes can be explained by magma reservoir pressurization which specifically closed vertical ring fractures. Long-term changes are related to subsidence of the caldera and likely include the influence of inelastic strain from the formation of new fractures. These observations provide new insights into the evolution of Kīlauea during its progressive collapse and will inform future interpretations for near-real-time monitoring at hazardous volcanoes around the world using similar techniques, especially where a dominant fracture orientation is present.

Hawaii↗
USGS2022

Detection of aseismic slip and poroelastic reservoir deformation at the North Brawley Geothermal Field from 2009 to 2019

The North Brawley Geothermal Field, located within the Brawley Seismic Zone of Southern California, presents a case study for understanding seismic hazards linked to fluid injection and geothermal energy extraction. An earthquake swarm near the geothermal field in 2012 included two earthquakes with magnitudes greater than 5 and was potentially preceded by a years-long aseismic slip transient. To better understand ground deformation around the geothermal field, including its evolution with time and its physical mechanisms, we analyze deformation before, during, and after the swarm using ground- and satellite-based geodetic techniques between 2009 and 2019. We integrate observations from GNSS, Sentinel-1, TerraSAR-X, UAVSAR, and leveling surveys into a single deformation history. Modeling of this new collection of observations at the North Brawley Geothermal Field provides evidence for 80% more pre-swarm aseismic slip than previously recognized from 2009 to 2012. During the 2012 Brawley swarm, our geodetic slip inversions closely match the results of seismic waveform inversions from the swarm events. After the 2012 swarm, surface deformation is dominated by poroelastic deformation of a shallow fluid reservoir at <1 km depth rather than fault slip. The deformation history and seismicity catalogs at North Brawley suggest a cessation of fault-related slip during the ∼7 years after the 2012 earthquake swarm.

California↗
USGS2022

Insights on multistage rock avalanche behavior from runout modeling constrained by seismic inversions

Inversion of low-frequency regional seismic records to solve for a time series of bulk forces exerted on the earth by a landslide (a force-time function) is increasingly being used to infer volumes and dynamics of large, highly energetic landslides, such as rock avalanches and flowslides, and to provide calibration information on event dynamics and volumes for numerical landslide runout models. Much of the work to date using landslide runout modeling constrained by seismic data has focused on using single-phase models with frictional or velocity-weakening rheologies. Awareness of multistage landslide initiations is increasing, with discrete failures separated in time contributing to the final impact of an event. Our work utilizes a method for incorporating seismic data as a calibration constraint for landslide runout models, considering variable rheologies and different initiation conditions. This study presents a systematic examination of multiple rheologies and initiation conditions, and shows how these factors affect the force-time function derived from the landslide runout model. Our work confirms that, while rheology and fragmenting or initially coherent initiations affect the force-time function, multiple collapses separated by tens of seconds have the greatest impact on the shape and amplitude. We apply this method to the analysis of three real rock avalanches to better constrain plausible initiation conditions and rheology parameters using both seismic and field data. This study provides insights on how assumptions about the initiation dynamics of the source zone and the runout model definition can aid in the interpretation of seismic inversions for multistage rock avalanches.

Journal of Geophysical Research: Solid Earth↗
USGS2021

Cohesive sediment modeling in a shallow estuary: Model and environmental implications of sediment parameter variation

Numerical models of sediment transport in estuarine systems rely on parameter values that are often poorly constrained and can vary on timescales relevant to model processes. The selection of parameter values can affect the accuracy of model predictions, while environmental variation of these parameters can impact the temporal and spatial ranges of sediment fluxes, erosion, and deposition in the real world. We implemented a numerical model of San Pablo Bay, an embayment within San Francisco Bay, California, for November–December 2014, and compared model outputs to observations of water level, velocity, wave parameters, salinity, and suspended sediment concentration (SSC) in the shallow regions. Idealized model runs show that wind timing relative to the phase of the tides is the strongest control on sediment fluxes and bed erosion. We varied sediment erodibility in the outflow of the Petaluma River; while this causes erosion and deposition to vary strongly through the shallows system, total export from the shallows does not change. Model runs with realistic winds show that wind likely resuspends faster settling particles or allows for more particle flocculation; particle settling velocity controls system-wide sediment accumulation. At the margins of the system, the magnitude of SSC is closely tied to wind direction when winds occur during flood tide, but sediment deposition is less connected: Both bed evolution and SSC need to be considered in the prediction of marsh fate. Spatial patterns of light attenuation due to SSC is strongly tied to assumed settling velocity.

California↗
USGS2021

Distinguishing between regression model fits to global mean sea level reconstructions

Global mean sea level (GMSL) has been rising since the last century, posing a serious challenge for the coastal areas. A variety of regression models have been utilized for determining GMSL rise over the past one hundred years, resulting in a large spread of sea level rise rates and multidecadal variations. In this study, we develop a new nonparametric noise model that is data-dependent and considers overfitting due to regression. The noise model is used to determine whether one regression model has significantly better skill than others over the period 1900–2010. The choices of background noise and GMSL reconstruction influence whether two sea level models can be statistically distinguished. With our new nonparametric noise spectra, the differences of model skills in explaining sea level variance are significant only in 34% of model comparisons. However, stepwise trends with three inflection points are significantly more skillful than the linear, quadratic, or exponential trend for most GMSL reconstructions, suggesting the importance of multidecadal variability of sea level rise in the twentieth century. Nevertheless, stepwise trend models cannot be distinguished from models with a long-term harmonic oscillation, indicating that the shape of multidecadal variability is not conclusive. The multidecadal variability is also significant in the steric and barystatic sea level contributions and is related to both natural and anthropogenic forcings. GMSL predictions based on regression fits in the twentieth century underestimate the sea level rise rate over the period 2011–2020 because the sea level acceleration in the recent decade (2011–2020) is not well represented.

Journal of Geophysical Research- Oceans↗
USGS2021

Hydrate formation on marine seep bubbles and the implications for water column methane dissolution

Methane released from seafloor seeps contributes to a number of benthic, water column, and atmospheric processes. At seafloor seeps within the methane hydrate stability zone, crystalline gas hydrate shells can form on methane bubbles while the bubbles are still in contact with the seafloor or as the bubbles begin ascending through the water column. These shells reduce methane dissolution rates, allowing hydrate-coated bubbles to deliver methane to shallower depths in the water column than hydrate-free bubbles. Here, we analyze seafloor videos from six deepwater seep sites associated with a diverse range of bubble-release processes involving hydrate formation. Bubbles that grow rapidly are often hydrate-free when released from the seafloor. As bubble growth slows and seafloor residence time increases, a hydrate coating can form on the bubble's gas-water interface, fully coating most bubbles within ∼10 s of the onset of hydrate formation at the seafloor. This finding agrees with water-column observations that most bubbles become hydrate-coated after their initial ∼150 cm of rise, which takes about 10 s. Whether a bubble is coated or not at the seafloor affects how much methane a bubble contains and how quickly that methane dissolves during the bubble's rise through the water column. A simplified model shows that, after rising 150 cm above the seafloor, a bubble that grew a hydrate shell before releasing from the seafloor will have ∼5% more methane than a bubble of initial equal volume that did not grow a hydrate shell after it traveled to the same height.

Journal of Geophysical Research - Oceans↗
USGS2021

Active Mars: A dynamic world

Mars exhibits diverse surface changes at all latitudes and all seasons. Active processes include impact cratering, aeolian sand and dust transport, a variety of slope processes, changes in polar ices, and diverse effects of seasonal CO 2 frost. The extent of surface change has been surprising and indicates that the present climate is capable of reshaping the surface. Activity has important implications for the Amazonian history of Mars: understanding processes is a necessary step before we can understand their implications and variations over time.

Journal of Geophysical Research: Planets↗
USGS2022

Evidence for fluctuating wind in shaping an ancient Martian dune field: The Stimson formation at the Greenheugh pediment, Gale crater

Temporal fluctuations of wind strength and direction can influence aeolian bedform morphology and orientation, which can be encoded into the architecture of aeolian deposits. These strata represent a direct record of atmospheric processes and can be used to understand ancient Martian atmospheric processes as well as those on Earth. The strata can: give insight to ancient atmospheric circulation, how the atmosphere evolved in response to global changes in habitability, and how ancient processes differ from modern processes. The Stimson formation at the Greenheugh pediment (Gale crater) records evidence of fluctuating wind across multiple temporal scales. The strata can be subdivided into three intervals–Gleann Beag, Ladder, and Edinburgh intervals. Internally, the intervals record changes of dune morphology and orientation, correlatable to wind fluctuations at multiple temporal scales. The basal Gleann Beag interval comprises compound cross-strata, deposited by oblique compound dunes. These dunes record a bimodal wind regime, resulting in net sediment transport toward the north. The Ladder interval records a reversal of sediment transport to the south, where straight-crested simple-dunes shaped by a seasonally variable winds formed. Finally, the Edinburgh interval records sediment transport to the west, where a unimodal wind formed sinuous-crested simple dunes. These observations demonstrate active and variable atmospheric circulation in Gale crater during the accumulation of the Stimson dune field, at multiple temporal scales from seasonally driven winds to much longer time-frames, during the Hesperian. These observations can be used to further understand ancient atmospheric conditions and processes, at a high temporal resolution on Mars.

Journal of Geophysical Research - Planets↗
USGS2022

Orbital and in-situ investigation of periodic bedrock ridges in Glen Torridon, Gale Crater, Mars

Wind has been the dominant agent of landscape modification on Mars for the past ~3 billion years. Among the diversity of features formed by aeolian abrasion on the surface of Mars are periodic bedrock ridges (PBRs), a relatively recently recognized class of erosional bedforms on Mars for which Earth analogues are rare. Gale crater, the field site for NASA’s Mars Science Laboratory Curiosity rover since it landed there in 2012, contains a diverse and extensive record of aeolian deposition and erosion. This study focuses on a series of periodic, linear bedrock ridges that occur within the Fe/Mg-smectite clay-bearing Glen Torridon region of Aeolis Mons (informally Mount Sharp). During Curiosity’s exploration of the Glen Torridon region between sols ~2300-3080, the rover drove through this field of ridges, providing the first opportunity for the in situ observation of these enigmatic erosional features. This study characterizes the Glen Torridon ridges using orbiter and rover data to determine their morphology, spatial distribution, compositional and material properties, and association with other aeolian features in the area. Based on these observations, the Glen Torridon ridges are interpreted to be consistent with an origin as wind-eroded periodic bedrock ridges carved during the most recent exhumation of Mount Sharp into the present-day mound. Although there is evidence for multidirectional winds in the Glen Torridon region based on the orientation of modern ripples, megaripples, TARs and other bedrock indicators, the consistent orientation of the Glen Torridon ridges, coupled with morphologic asymmetries within the ridges, support formation and elongation of the Glen Torridon PBRs forms parallel to a net regional northerly wind direction in and around Gale crater.

Journal of Geophysical Research E: Planets↗