SEARCH · Search USGS

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

USGS1984

Carbonate and organic-carbon cycles and the history of upwelling at Deep Sea Drilling Project Site 532, Walvis Ridge, South Atlantic Ocean

Detailed carbonate and organic-carbon stratigraphies were constructed from samples collected every 20 cm in a 250-m hydraulic piston core recovered at DSDP Site 532 on Walvis Ridge. This sampling interval represents about one sample every 5000 yr., based on sediment accumulation rates calculated from nannofossil biostratigraphic zones. All samples were analyzed for percent CaCO 3 , resulting in a detailed carbonate stratigraphy for the past 5.0 m.y. The samples for the top 110 m of section were also analyzed for organic carbon in order to construct a detailed organiccarbon stratigraphy for the last 2.5 m.y. The recovered section has distinct dark-light color cycles with average periodicities of 55, 58, and 30 k.y. for the Quaternary, upper Pliocene, and lower Pliocene, respectively. Periodicities of carbonate cycles are similar to the color cycles; most carbonate minima correspond to the dark parts of color cycles. The average periodicity for carbonate cycles is about 36 k.y. Darker parts of color cycles usually contain higher concentrations of organic carbon, but the organic-carbon record does not follow the cyclicity of the color cycles in detail, at least for the last 2.5 m.y. Organic-carbon cycles have an average periodicity of about 34 k.y. for the Quaternary and upper Pliocene. The cycles of CaCO 3 and color have periodicities similar to those reported from carbonate stratigraphies from the northeast Atlantic, Caribbean, and eastern equatorial Pacific. The carbonate cycles at Site 532 are the result of external forcing, probably related to global climate, that affected fluctuations in both sediment supply from the African continental margin and productivity of siliceous organisms. The organic-carbon cycles have similar periodicities and similar changes in periodicities to those of the CaCO 3 cycles. Semiquantitative estimates of diatom abundance from smear slides and concentrations of biogenic SiO 2 calculated from chemical analyses suggest that upwelling at Site 532 was minor until about 3 m.y. ago. The Benguela-Current upwelling system either began at that time or, more likely, migrated into the area of Site 532, where it prevailed until some time between about 1.2 and 0.5 m.y. ago. The increase and decline of upwelling in the area of Site 532, however, did not disturb the trend of cyclicities of carbonate and organic carbon. The latest change in conditions at Site 532 was an increase in intensity of bottom currents during the past 0.5 m.y. that winnowed nannofossils, diatoms, and clay and left a lag deposit represented by a foraminifer-rich fades

Initial Reports of the D.S.D.P.↗

USGS1998

Summary of ground-water quality in West Virginia

Water-quality data for the 28 sites in the West Virginia ambient ground-water-quality network and for wells in the U.S. Geological Survey National Water Information System (NWIS) data base for West Virginia were analyzed statistically to identify any water-quality trends and relations and to compare data from the two data sets. Data for 10 selected properties and constituents (pH, fecal coliform, iron, manganese, sulfate, hardness, nitrate plus nitrite, chloride, fluoride, and dissolved solids) were grouped by geologic unit, topographic setting, well depth, and season; simple statistical descriptors such as mean, median, maximum, minimum, standard deviation, and 10th and 90th percentiles were computed for each property and constituent and are summarized in tables. Analysis of the data for wells from the NWIS data base showed that highest median concentrations of dissolved iron and dissolved manganese are in samples from the Lower Pennsylvanian units, which are found mainly in the low-sulfur coal fields of southern West Virginia; the highest median concentration of dissolved sulfate is in samples from the Quaternary alluvium along the Ohio and Kanawha Rivers; and the highest median hardness and concentrations of dissolved nitrate plus nitrite are in samples from the Cambrian and Ordovician karst limestone units found mainly in the Eastern Panhandle. The highest median concentrations of dissolved iron and dissolved manganese are in samples from valley wells and wells of shallow depth, and hardness is greatest in samples from hilltop wells. Analysis of data for all wells and springs in the ambient network corroborated statistics for the NWIS data set in that median concentration of total iron is highest in samples from the Lower Pennsylvanian units, median concentration of dissolved sulfate is highest in samples from the Quaternary alluvium, and hardness and median concentrations of total nitrate plus nitrite are highest in samples from the Cambrian and Ordovician units. Data from the ambient network did not show any significant seasonal variations in groundwater quality. Of the additional constituents sampled for in the ambient network, median concentrations of metals were less than U.S. Environmental Protection Agency drinking-water standards, and organic chemical constituents were rarely detected. Statistical comparisons of data from the NWIS data base and the ambient network data set showed no significant differences except for fecal coliform, iron, and manganese. Median concentrations of these three constituents were several times greater for samples from wells and springs in the ambient network. Statistical differences in values for these constituents could be attributed to differences in the state of constituents sampled (dissolved concentrations of iron and manganese for the NWIS data set as opposed to total concentrations for the ambient network data set) and the smaller number of sites in the ambient network. Statistical resolution could be improved by sampling a greater number of wells and springs that have a greater diversity of geologic and topographic conditions for the ambient network. The present ambient network does not include sites in Silurian or Middle Pennsylvanian geologic units nor sites in hilltop settings. The statistical validity of the ambient network could be improved by sampling additional sites, especially those for aquifers underrepresented in the data set.

West Virginia↗

USGS2015

Geologic framework of the Alaska Peninsula, southwest Alaska, and the Alaska Peninsula terrane

The Alaska Peninsula is composed of the late Paleozoic to Quaternary sedimentary, igneous, and minor metamorphic rocks that record the history of a number of magmatic arcs. These magmatic arcs include an unnamed Late Triassic(?) and Early Jurassic island arc, the early Cenozoic Meshik arc, and the late Cenozoic Aleutian arc. Also found on the Alaska Peninsula is one of the most complete nonmetamorphosed, fossiliferous, marine Jurassic sedimentary sections known. As much as 8,500 m of section of Mesozoic sedimentary rocks record the growth and erosion of the Early Jurassic island arc. A thinner, but still thick (as much as 5,400 m), sequence of Tertiary sedimentary rocks that are predominantly continental overlies the Mesozoic section. A brief regression in early Tertiary time on the Alaska Peninsula and granodiorite plutonism in the Shumagin, Semidi, and Sanak Islands was followed by deposition of fluvial and minor marine clastic strata. This was followed by deposition of transgressive marine clastic strata and initiation of the Meshik arc, shown by an areally extensive outpouring of volcanic and volcaniclastic rocks and debris between late Eocene and earliest Miocene time. Late Miocene time was marked by another brief transgression and northwest- to southeast-directed compression, followed by renewed volcanism and plutonism which initiated the modern Aleutian magmatic arc. Extensive glacial and glaciomarine deposits of late Pleistocene age create an extensive lowland physiographic province on the northwest side of the Alaska Peninsula and join isolated mountain masses to the Alaska Peninsula on the southwest. Multiple active volcanoes and volcanic peaks dominate the skyline of the Alaska Peninsula and represent the continuation of magmatic activity that has formed the Aleutian arc since late Miocene time. The Alaska Peninsula has had a long and involved history since Paleozoic time. We propose that the Paleozoic and Mesozoic rocks that constitute much of the Alaska Peninsula be called the Alaska Peninsula terrane. Using the concept of subterranes, we divide the terrane into two distinct but tectonically related subterranes: the Chignik and Iliamna subterranes, which share a limited common geologic history. The Iliamna subterrane has served at most times as a source area for the Chignik subterrane; however, some rock units are in common across the subterranes. The Iliamna and Chignik subterranes are in part separated by the Bruin Bay fault system. The Iliamna subterrane is composed of moderately deformed early Mesozoic marine sedimentary and volcanic rocks and schist, gneiss, and marble of Paleozoic(?) and Mesozoic age, and plutonic rocks of the Alaska-Aleutian Range batholith. Characteristic of the Chignik subterrane are little-deformed, shallow-marine to continental clastic sedimentary rocks ranging in age from Permian to latest Cretaceous. However, deep-marine, volcaniclastic, and calcareous rocks form important components of the older rocks in the subterrane. The two subterranes of the Alaska Peninsula terrane are characterized by radically different structural and metamorphic styles. The nonplutonic rocks of the Iliamna subterrane are characterized by metamorphism up to amphibolite-facies grade and intense folding. In the Chignik subterrane, the structural style is dominated by large, open, en echelon anticlinal structures, normal faulting, and thrust and high-angle reverse faults that have minor displacement in a northwest to southeast direction. In the Outer Shumagin and Sanak Islands, rocks assigned to the Chugach terrane are characterized structurally by tight, generally northeast-trending folds. Dips in these rocks tend to be steep, rarely less than 35°, and overturned beds are locally common. The boundaries separating the Alaska Peninsula terrane from other terranes are commonly indistinct or poorly defined. A few boundaries have been defined at major faults, although the extensions of these faults are speculative through some areas. The west side of the Alaska Peninsula terrane is overlapped by Tertiary sedimentary and volcanic rocks and Quaternary deposits.

Alaska↗

USGS1995

Mineral and energy resources of the Roswell Resource Area, East-Central New Mexico

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari Basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-Valley-type lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called 'Pecos diamonds' and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, carbon dioxide, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, and clay. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum-group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver-tellurium veins, and thorium-rare-earth veins. Museum-quality quartz crystals are associated with Tertiary intrusive rocks. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and occurrences of silver and uranium. Important industrial commodities include caliche, limestone and dolomite, and aggregate. Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

New Mexico↗

USGS2006

Oligocene–Miocene Maykop/Diatom Total Petroleum System of the South Caspian Basin Province, Azerbaijan, Iran, and Turkmenistan

The South Caspian Basin encompasses the southern extension of the Caspian Sea, including land areas in eastern Azerbaijan, western Turkmenistan, and northern Iran. The region is endowed with abundant petroleum resources, and oil and gas production has played an important commercial role in the region for more than 150 yr, especially in Azerbaijan and to a lesser extent in Turkmenistan. Major oil reserves are concentrated in 2,500–3,500 m of shallow-marine, deltaic to lacustrine deposits of middle Pliocene age. To date, some 620 oil and gas fields have been discovered in strata ranging in age from Miocene to Quaternary; however, less than a dozen fields produce from both Miocene and Quaternary reservoirs. The principal reserves and targets for future exploration are in the middle Pliocene Productive Series. The South Caspian Basin is unusual in several respects: sediment accumulated at exceptionally high rates (as high as 4.5 km/m.y.); sediment accumulation in each of three depocenters was as great as 20 km (5 km of Pliocene sedimentary deposits); there was low sediment compaction; geothermal gradients are relatively low (1.5°C/100 m); and abnormally high pressures exist in some basin areas. In this depositional environment, good reservoir porosities and permeabilities could be preserved to depths as great as 12 km. Analysis of source rock samples collected from outcrops, cores, and mud-volcano ejecta shows total organic carbon contents to range from 1.2 to more than 10 percent, the richest being in the middle part of the Oligocene–Miocene Maykop Series. Source rocks, with thicknesses ranging from 100 m to more than 2,500 m, form the cores of many anticlines in the basin. Reservoir rocks, consisting of fluviodeltaic clastic deposits ranging in texture from mudstone to conglomerate, are mostly in the middle Pliocene Productive Series, but some Miocene and lower Pliocene reservoirs are also present. Reservoir seals are formed by interbedded shales. Hydrocarbon traps developed mainly during the late Pliocene and early Pleistocene. The Oligocene–Miocene Maykop/Diatom Total Petroleum System within the South Caspian Basin is separated into five hydrocarbon assessment units: Apsheron-Pribalkhan Zone, Lower Kura Depression and Adjacent Shelf, Gograndag-Okarem Zone, Central Offshore, and Iran Onshore-Nearshore.

Bulletin↗

USGS1944

Manganese Deposits in the Artillery Mountains Region, Mohave County, Arizona

The manganese deposits of the Artillery Mountains region lie within an area of about 25 square miles between the Artillery and Rawhide Mountains, on the west side of the Bill Williams River in west-central Arizona. The richest croppings are on the northeast side of this area, among the foothills of the Artillery Mountains. They are 6 to 10 miles from Alamo. The nearest shipping points are Congress, about 50 miles to the east, and Aguila, about 50 miles to the southeast. The principal manganese deposits are part of a sequence of alluvial fan and playa material, probably of early Pliocene age, which were laid down in a fault basin. They are overlain by later Pliocene (?) basalt flows and sediments and by Quaternary basalt and alluvium. The Pliocene (?) rocks are folded into a shallow composite S1ncline ttat occupies the valley between the Artillery and Rawhide Mountains, and the folded rocks along either side of the valley, together with the overlying Quaternary basalt, are broken by faults that have produced a group of horsts, grabens, and step-fault blocks. The manganiferous beds, lie at two zones, 750 to 1,000 feet apart stratigraphically, each of which is locally as much as 300 to 400 feet thick. The main, or upper, zone contains three kinds of ore - sandstone ore, clay ore, and 'hard' ore. The sandstone and clay ores differ from the associated barren sandstone and clay, with which they are interlayered and into which they grade, primarily in containing a variable proportion of amorphous manganese oxides, besides iron oxides and clayey material such as are present in the barren beds. The 'hard' ore is sandstone that has been impregnated with opal and calcite and in which the original amorphous manganese oxides have been largely converted to psilomelane and manganite. The average manganese content of the sandstone and clay ores is between 3 and 4 percent and that of the 'hard' ore is between 6 and 7 percent. The ore contains an average of 3 percent of iron, 0.08 percent of phosphorus, 1.1 percent of barium, and minute quantities of copper, lead, and zinc. Although the manganese content of the sandstone and clay ore may change abruptly from bed to bed, the content within any individual bed changes gradually, and for any large volume of ore both the nanganese and iron content are remarkably uniform. Explorations to June 1941 consisted chiefly of 49 holes diamond-drilled in the upper zone on the Artillery Mountains side of the area. The district is estimated to contain an assured minimum of 200,000,000 tons of material having an average manganese content of 3 to 4 percent. About 20,000,000 tons of this total contains 5 percent or more of manganese, and 2,000,000 to 3,000,000 tons contains 10 percent or more. To what extent these deposits can be utilized is a metallurgical and economic problem. Although the clay and sandstone ores, as well as the 'hard' ore, are present in large tonnages, the 'hard' ore is the only kind that combines minable tonnage with promising grade. About 15,000,000 tons of 'hard' ore is present; about 500,000 tons of this contains 15 percent or more of manganese and averages 17 percent, and somewhat over 2,000,000 tons contains 10 percent or more and averages nearly 13 percent. Except for closer drilling to determine such things as the tonnage, grade, spacing, and form of the richer shoots with greater accuracy before beginning to mine them, further explorations are not recommended, for any new ore found is likely to be similar, both in grade and kind, to that already discovered.

Arizona↗

USGS1985

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste: Part II, Geologic and hydrologic characterization

The geology and hydrology of the Basin and Range Province of the western conterminous United States are characterized in a series of data sets depicted in maps compiled for evaluation of prospective areas for further study of geohydrologic environments for isolation of high-level radioactive waste. The data sets include: (1) Average precipitation and evaporation; (2) surface distribution of selected rock types; (3) tectonic conditions; and (4) surface- and ground -water hydrology and Pleistocene lakes and marshes. Rocks mapped for consideration as potential host media for the isolation of high-level radioactive waste are widespread and include argillaceous rocks, granitic rocks, tuffaceous rocks, mafic extrusive rocks, evaporites, and laharic breccias. The unsaturated zone, where probably as thick as 150 meters (500 feet), was mapped for consideration as an environment for isolation of high-level waste. Unsaturated rocks of various lithologic types are widespread in the Province. Tectonic stability in the Quaternary Period is considered the key to assessing the probability of future tectonism with regard to high-level radioactive waste disposal. Tectonic conditions are characterized on the basis of the seismic record, heat-flow measurements, the occurrence of Quaternary faults, vertical crustal movement, and volcanic features. Tectonic activity, as indicated by seismicity, is greatest in areas bordering the western margin of the Province in Nevada and southern California, the eastern margin of the Province bordering the Wasatch Mountains in Utah and in parts of the Rio Grande valley. Late Cenozoic volcanic activity is widespread, being greatest bordering the Sierra Nevada in California and Oregon, and bordering the Wasatch Mountains in southern Utah and Idaho. he arid to semiarid climate of the Province results in few perennial streams and lakes. A large part of the surface drainage is interior and the many closed basins commonly are occupied by playas or dry lake beds. The Province is divided into ground-water flow units defined on the basis of ground-water divides, ground-water flow lines, and surface streams that receive ground-water discharge. Ground water contains less than 500 milligrams per liter of dissolved solids throughout most of the Province. Ground water is more mineralized in areas underlain by evaporitic rocks, overlain by playas, and near saline lakes. Ground water is of the calcium, magnesium, or sodium bicarbonate type in the areas where dissolved-solids concentrations are less than 500 milligrams per liter, and of the calcium, magnesium, or sodium sulfate or chloride type where dissolved-solids concentrations are greater than 500 milligrams per liter. Geologic and hydrologic evidence is found for about 100 lakes and marshes that existed during the Pleistocene Epoch. The possibility of a recurrence of pluvial conditions, such as existed in the Pleistocene, is of concern in repository siting because of possible changes in hydrologic conditions. The Pleistocene lakes and marshes provide clues to the hydrology during pluvial climates.

Arizona, California, Idaho, Nevada, New Mexico, Or↗

USGS2025

A synthesis engine for constructing geologic maps of the United States

The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.

conterminous United States↗

USGS2005

Geologic map of the Wenatchee 1:100,000 quadrangle, central Washington: A digital database

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Wenatchee 1:100,000 Quadrangle, Central Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗

USGS2006

Database for the geologic map of the Chelan 30-minute by 60-minute quadrangle, Washington (I-1661)

This digital map database has been prepared by R. W. Tabor from the published Geologic map of the Chelan 30-Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗

USGS2006

Database for the geologic map of the Snoqualmie Pass 30-minute by 60-minute quadrangle, Washington (I-2538)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Snoqualmie Pass 30' X 60' Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗

USGS2006

Database for the geologic map of the Sauk River 30-minute by 60-minute quadrangle, Washington (I-2592)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Sauk River 30- by 60 Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled most Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗

USGS2006

Database for the Geologic Map of the Skykomish River 30-Minute by 60-Minute Quadrangle, Washington (I-1963)

This digital map database has been prepared from the published geologic map of the Skykomish River 30- by 60-minute quadrangle by the senior author. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. From the eastern-most edges of suburban Seattle, the Skykomish River quadrangle stretches east across the low rolling hills and broad river valleys of the Puget Lowland, across the forested foothills of the North Cascades, and across high meadowlands to the bare rock peaks of the Cascade crest. The Straight Creek Fault, a major Pacific Northwest structure which almost bisects the quadrangle, mostly separates unmetamorphosed and low-grade metamorphic Paleozoic and Mesozoic oceanic rocks on the west from medium- to high-grade metamorphic rocks on the east. Within the quadrangle the lower grade rocks are mostly Mesozoic melange units. To the east, the higher-grade terrane is mostly the Chiwaukum Schist and related gneisses of the Nason terrane and invading mid-Cretaceous stitching plutons. The Early Cretaceous Easton Metamorphic Suite crops out on both sides of the Straight Creek fault and records it's dextral displacement. On the south margin of the quadrangle, the fault separates the lower Eocene Swauk Formation on the east from the upper Eocene and Oligocene(?) Naches Formation and, farther north, its correlative Barlow Pass Volcanics the west. Stratigraphically equivalent rocks of the Puget Group crop out farther to the west. Rocks of the Cascade magmatic arc are mostly represented by Miocene and Oligocene plutons, including the Grotto, Snoqualmie, and Index batholiths. Alpine river valleys in the quadrangle record multiple advances and retreats of alpine glaciers. Multiple advances of the Cordilleran ice sheet, originating in the mountains of British Columbia, Canada, have left an even more complex sequence of outwash and till along the western mountain front, up these same alpine river valleys, and over the Puget Lowland. This database and accompanying plot files depict the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗

USGS2014

Database for the geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

This geospatial database for a geologic map of the Cascades Range in Washington state is one of a series of maps that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units. Geologic maps of the Eocene to Holocene Cascade Range in California and Oregon complete the series, providing a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanantion. The complete series will be useful for regional studies of volcanic hazards, volcanology, and tectonics. Originally a project supported by the Geothermal Research Program of the U.S. Geological Survey, the maps emphasize Quaternary volcanic rocks, because large igneous-related hydrothermal systems that have high temperatures are associated with Quaternary volcanic fields. Rocks older than a few million years are also included on the maps as they help to unravel geologic puzzles of the present-day Cascade Range. The deeply eroded older volcanoes found in the Western Cascades physiographic subprovince are analogues of today's snow-covered shield volcanoes and stratovolcanoes. The fossil hydrothermal systems of the Eocene to Pliocene vents now exposed provide clues to processes active today beneath the Pleistocene and Holocene volcanic peaks along the present-day crest of the Cascade Range. Study of these older rocks can aid in developing models of geothermal systems. These rocks also give insight into the origins of volcanic-hosted mineral deposits and even to future volcanic hazards. This digital database contains information used to produce the geologic map published as Sheet 1 in U.S. Geological Survey Miscellaneous Investigations Series Map I-2005. (Sheet 2 of Map I-2005 shows sources of geologic data used in the compilation and is available separately). Sheet 1 of Map I-2005 shows the distribution and relations of volcanic and related rock units in the Cascade Range of Washington at a scale of 1:500,000. This digital release is produced from stable materials originally compiled at 1:250,000 scale that were used to publish Sheet 1. The database therefore contains more detailed geologic information than is portrayed on Sheet 1. This is most noticeable in the database as expanded polygons of surficial units and the presence of additional strands of concealed faults. No stable compilation materials exist for Sheet 1 at 1:500,000 scale. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map sheet, main report text, and accompanying mapping reference sheet from Map I-2005. For more information on volcanoes in the Cascade Range in Washington, Oregon, or California, please refer to the U.S. Geological Survey Volcano Hazards Program website.

Washington↗

USGS2013

Geologic map of the Lead Mountain 15’ quadrangle, San Bernardino County, California

The Lead Mountain 15’ quadrangle in the Mojave Desert contains a record of Jurassic, Cretaceous, Tertiary, and Quaternary magmatism. Small amounts of Mesoproterozoic(?) augen gneiss and Paleozoic and Mesozoic(?) metasedimentary rocks are preserved in small patches; they are intruded by voluminous Jurassic plutons of quartz diorite to granite composition and by Late Cretaceous granite of the Cadiz Valley batholith. Jurassic intrusive rocks include part of the Bullion Mountain Intrusive Suite and also younger dikes inferred to be part of the Jurassic Independence dike swarm. A contact-metamorphosed aureole 2 km wide in the Jurassic plutonic rocks fringes the Cadiz Valley batholith. Early Miocene dacitic magmatism produced a dense swarm of dikes in the eastern Bullion Mountains and the volcanic-intrusive remnant of a volcano at Lead Mountain. Tilting of the dike swarm from inferred vertical orientations may have resulted from Miocene tectonic extension. Conglomerate of Pliocene and (or) Miocene age is also tilted. Younger volcanism is recorded by Pliocene basalt of the Deadman Lake volcanic field, basalt of Lead Mountain (approximately 0.36 Ma), and the even younger basalt of Amboy. Quaternary sedimentation built alluvial fans and filled playas in the map area. Faulting in the dextral eastern California shear zone produced several northwest-striking faults in the quadrangle, some of them active into the Pleistocene and some that may have many kilometers of right-lateral offset.

California↗

USGS1985

Seismotectonic map of the Puget Sound region, Washington

The Puget Sound region is a seismically active area with hundreds of earthquakes occurring each year (Crosson, 1974, 1975, Crosson and Millard, 1975, Crosson and Noson, 1978a, 1978b, 1979). Most of the earthquakes are so small that they can be detected only by sensitive seismographs such as those operated by the University of Washington. Not all of the earthquakes have been small, however, for several damaging ones have occurred in historic time. Little is known about the geologic structures responsible for generating these earthquakes, and knowledge of the causative structures is fundamental to an adequate evaluation of the earthquake risks for the Puget Sound region. The purpose of this map is to summarize the current knowledge about tectonic deformation, seismicity, and the tectonic framework of the Puget Sound region in order to provide a basis for detailed geologic and geophysical studies that will lead to better understanding of the structures and forces responsible for generating earthquakes in the area. This map is a compilation of all known and inferred faults, including what is known about their age of movement. Also shown are some deformed deposits of Quaternary age and earthquake epicenters. Few of the faults have been studied in sufficient detail to establish whether or not they have been active or inactive during late Tertiary or Quaternary time, but most of the faults are the result of tectonic forces that were active during early and middle Tertiary time. These faults may or may not be related to the tectonic forces responsible for the current seismicity. Approximately 5 percent of the earthquakes recorded in the Puget Sound region originated at depths of 40 Km or more (Crosson, 1972, fig. 11), and these are probably not directly related to exposed or near-surface structures. Most of the earthquakes occur at shallower depths and may be associated with near-surface structures, but no earthquakes have been definitely identified with mapped faults.

Washington↗

USGS1993

Geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

Since 1979 the Geothermal Research Program of the U.S. Geological Survey has carried out a multidisciplinary research effort in the Cascade Range. The goal of this research is to understand the geology, tectonics, and hydrology of the Cascades in order to characterize and quantify geothermal resource potential. A major goal of the program is compilation of a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanation. This map is one of a series presently being compiled that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units; map sheets of the Cascade Range in California and in Oregon complete the series. The complete series forms a guide to exploration and evaluation of the geothermal resources of the Cascade Range and will be useful for studies of volcanic hazards, volcanology, and tectonics. For geothermal reasons, the maps emphasize Quaternary volcanic rocks. Large igneous-related geothermal systems that have high temperatures are associated with Quaternary volcanic fields, and geothermal potential declines rapidly as age increases (Smith and Shaw, 1975). Most high-grade recoverable geothermal energy is likely to be associated with silicic volcanism less than 1 Ma. Lower grade (= lower temperature) geothermal resources may be associated with somewhat older rocks; however, volcanic rocks older than about 2 Ma are unlikely geothermal targets (Smith and Shaw, 1975).

Washington↗

USGS2004

Geologic map of the Kanab 30' x 60' quadrangle, Utah and Arizona

The 1:100,000-scale geologic map of the sparsely populated Kanab 30' x 60' quadrangle in southernmost Utah and a narrow strip in northernmost Arizona delineates 17 formations and numerous subdivisions of sedimentary rock units of Permian, Triassic, Jurassic, Cretaceous, and Tertiary ages; 12 Quaternary alluvial, eolian, and mass-wasting units; and Quaternary basaltic igneous rocks and vents.Units within the Straight Cliffs Formation are correlated with those of the Kaiparowits Plateau. Palynological edidence indicates that the Kaiparowits(?) Formation is older than the type formation in the Kaiparowits Plateau. Structures include parts of the Sevier, Kanab Creek, Johnson Canyon, and Paunsaugunt fault zones. Regional dip is generally northeast at very low angles. Coal beds are presentin the upper unit of the Straight Cliffs Formation, in the Tropic Shale, and in the Dakota Formation.

IMAP↗