SEARCH · Search USGS
Results for “Stratigraphy”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stratigraphy and sedimentology of Middle and Upper Silurian rocks and an enigmatic diamictite, southeastern New York
No abstract available.
Stratigraphy in the region of Delaware Water Gap National Recreation Area
No abstract available.
The Shawangunk and Martinsburg Formations revisited; sedimentology, stratigraphy, mineralogy, geochemistry, structure and paleontology
In southeastern New York Middle Silurian Shawangunk Formation (Figure 1), containing gray conglomerate, sandstone and shale, lies unconformably above the Ordovician Martinsburg Formation, consisting of shales and graywackes. In southwestern New York, near the Port Jervis area, The Shawangunk Formation is overlain by the Bloomsburg Red Beds, the same stratigraphic sequence that occurs in Pennsylvania and New Jersey to the southwest. The Shawangunk Formation thins gradually from Port Jervis to its pinchout near Hidden Valley and Binnewater, New York. Two tongues of the upper part of the Shawangunk are: the Ellenville Tongue that extends from the Ellenville-Accord area to its feather edge just southwest of the New York-New Jersey border and, the High View Tongue that is restricted to the Wurtsboro area (Epstein and Lyttle, 1987; Epstein, 1993). Early in the Paleozoic carbonate banks lay along the east coast of the ancient North American continent. During the Ordovician plate convergence commenced in the closing of the Iapetus Sea and a deep basin developed into which thick muds and dirty sands were deposited. These were later lithified into the Martinsburg Formation. Eventually, with continued compression, these sediments were folded and faulted during the complex deformation of the Taconic Orogeny. The trend of these folds in southeastern New York is approximately N20E. As one proceeds westward across the Wallkill Valley these structures become less intense. Subsequent to the Taconic Orogeny mountains rose to the east and coarse sediments were transported westward and deposited as the conglomerates and sandstones of the Shawangunk Formation across the beveled folds of the Martinsburg. Deposition occurred on a plain of alluviation and in a marine basin to the northwest. Erosion of the source area was intense, and the climate, based on the mineralogy of the rocks, was warm and at least semiarid. The source was composed predominately of sedimentary and low-grade metamorphic rocks with exceptionally abundant quartz veins and small local areas of gneiss and granite. As the source highlands were eroded, the steep braided streams of the Shawangunk gave way to more gentle-gradient streams of the Bloomsburg Red Beds.
Trip C; Structure and stratigraphy above, below, and within the Taconic unconformity, southeastern New York
No abstract available.
Bog stratigraphy, radiocarbon dates, and Pinedale to Holocene glacial history in the Front Range, Colorado
Radiocarbon dates and stratigraphic cores from bogs, kettle ponds, and former ice-marginal lakes on the east and west sides of the Front Range, Colo., between lat 40°00' and 40°24' N. suggest that (1) valley glaciers of Pinedale age began to recede from their terminal positions between about 14,600 and 13,000 yr ago, (2) revegetation of glaciated areas at altitudes of 2,600-2,900 m (8,600-9,500 ft) was complete by 11,000-10,000 yr ago, (3) at one site, 3,500±1,000 yr elapsed before peat began to form after deglaciation, (4) the formation of bogs within the glaciated areas kept pace with glacier recession in a general way, beginning at progressively later times as deglaciation proceeded upward, (5) Pinedale glaciers had disappeared or were reduced to small remnants by about 8,000 yr ago, (6) moraines that have been mapped as belonging to the early stade of Pinedale Glaciation are no younger than 13,000 yr B.P. and may be older than 14,600 yr, and those delimiting what has been mapped as late stade are no younger than about 7,600 yr B.P. and are probably older than 7,800 yr, and (7) most of the till mapped as Pinedale was deposited between about 14,600 and 8,000 yr ago.
Palynology and stratigraphy of Cretaceous strata in Long Island, New York, and Block Island, Rhode Island
Palynologic analysis of core samples from Fire Island well, S21,091T, in southern Long Island and of surface samples from Garvies Point in northern Long Island and from eastern Block Island indicates that the Cretaceous of this region includes Raritan, Magothy, Matawan, and Monmouth (as previously defined) strata, and ranges in age from Cenomanian to Maestrichtian, in agreement with recent studies in New Jersey. In this study, the oldest Cretaceous, which is equivalent to the Woodbridge day Member of the Raritan Formation of New Jersey, occurs just above sea level at Garvies Point, Glen Cove, and in the Port Washington sand pits in northwestern Long Island, whereas sediments from near the base of the Fire Island well arc correlated with the South Amboy Fire Clay Member. The Magothy and Matawan combined in Long Island are about 1,500 ft (457 m) thick, whereas in New Jersey both units rarely exceed a thickness of 500 ft (152 m). Outcropping Cretaceous sediments in Block Island are equivalent to the South Amboy Fire Clay Member rather than the Magothy, as indicated in prior studies. Palynologic zonation of the Late Cretaceous is tentatively extended to Magothy and younger strata on the basis of the appearance and proliferation of the more advanced, angiosperm pollen forms. This study also provides a basis for extending the zonation and hence the correlation to the sediments of the Continental Shelf.
Stratigraphy, structure, and geologic history of the Lunar Lake Caldera of northern Nye County, Nevada
The Lunar Lake caldera is in northern Nye County, Nev., about 70 mi (110 km) east-northeast of Tonopah. It is the youngest caldera in the central Nevada multiple-caldron complex and the source of the tuff of Lunar Cuesta, a multiple-flow simple cooling unit of quarts latitic welded tuff that is about 25 m.y. old. The tuff was distributed over an area of nearly 3,000 mi 2 (7,770 km 2 ) and has a volume of approximately 90 mi 3 (375 km 3 ). The Lunar Lake caldera is the site of the Lunar Crater basalt field which contains basalts of Pleistocene and probably Holocene age. These basalts were fed from northeast-trending fissures that had much earlier served as vents for ash-flow tuffs and lavas, possibly including the tuff of Lunar Cuesta.
Structure and Paleozoic stratigraphy of a complex of thrust plates in the Fish Creek Reservoir area, south-central Idaho
Permian, Pennsylvanian, Mississippian, Devonian, and Silurian marine rocks of diverse facies are brought together in a complex of six thrust sheets in the Fish Creek Reservoir area on the north edge of the Snake River Plain, Idaho. The lowest structural element, the parautochthon, is made of more than 450 m (1,500 ft) of folded and faulted Devonian miogeosynclinal carbonate rocks present in a 6.5-km 2 (2.5-mi 2 ) window. Along the east margin of the window, a sliver of continental margin transitional carbonate rocks of Early Devonian and Late Silurian age assigned to the Roberts Mountains Formation is thrust over the miogeosynclinal rocks. The window of middle Paleozoic rocks is overridden along the Fish Creek thrust fault by the flysch facies of the Copper Basin Formation, a turbidite-submarine-fan sequence more than 1,000 m (3,300 ft) thick, of Mississippian age. About 4.8 km (3 mi) southwest of the window, about 100 m (300 ft) of deepwater siliceous oceanic facies clastic rocks are exposed, which are assigned with question to the Milligen(?) Formation of Devonian age. These clastic rocks are interpreted to be thrust over the Copper Basin Formation. The highest structural elements are sequences more than 610 m (2,000 ft) thick of interbedded sandy and conglomeratic limestones, quartzites, and conglomerates and interbedded siltstones and argillites of the Wood River Formation of Middle Pennsylvanian to Early Permian age. The Wood River Formation is in thrust contact with the Milligen(?) Formation in the southwest part of the mapped area and with Copper Basin Formation along the west side of Fish Creek Reservoir. All the thrust sheets have moved eastward. The minimum distance moved is estimated from sedimentation models and facies reconstructions to range from perhaps several kilometres for the allochthon of the Roberts Mountains Formation to 48 km (30 mi) for the Milligen(?) Formation allochthon. The principal period of thrusting was post-Early Permian (post-Wood River Formation) and preEocene (pre-Challis Volcanics) and is of probable Sevier age. Middle Paleozoic rocks of the Milligen and Roberts Mountains Formations, however, also may have been involved in an earlier period of thrusting of latest Devonian to earliest Mississippian age related to the Antler orogeny. The thrust sheets were deformed into a northwest-trending dome in late Mesozoic time and were broken by basin-range faults during the Tertiary.
Stratigraphy, conodont dating, and paleotectonic interpretation of the type Milligen Formation (Devonian), Wood River area, Idaho
The Milligen Formation at and near its type locality in the Wood River area is considerably older than and unrelated to rocks of Early Mississippian age called Milligen Formation in the Lost River Range and other ranges of east-central Idaho. Conodont faunas were found in limestones of a thin upper member of the sparsely fossiliferous marine Milligen Formation in its principal reference section at Milligen Gulch, at Fisher Canyon, and near Bellevue, Idaho. The faunas include indigenous conodonts here assigned to the early Late Devonian (early Frasnian) Lower and Middle Polygnathus asymmetricus Zones, and reworked conodonts derived from several Middle and Early Devonian conodont zones. An underlying much thicker argillite member of the Milligen contains fewer limestones, but a thin encrinite interbed near the middle of the member yielded early Middle Devonian (Eifelian) conodonts. This lower member probably represents most of Middle and Early Devonian time. Although its base is nowhere exposed in the Wood River area, the Milligen is inferred to have been deposited on the Silurian Trail Creek Formation, which crops out just to the east in the Pioneer Mountains. The age of the Milligen is therefore wholly Devonian and the highest fossiliferous beds are no younger than early Late Devonian. Reworked Middle and Early Devonian conodonts in limestone turbidites of the upper member of the Milligen Formation are identical to conodonts found in shelf (miogeosynclinal) carbonate rocks farther east. A postulated eastern source for the turbidites is supported by new data on the distribution, thickness, and tectonic facies of Devonian rocks that suggest the presence of a Late Devonian ridge on the continental shelf east of the Milligen depositional area. The Milligen Formation was intensely folded and was emergent during most of the Mississippian time when it formed part of the Antler Highlands, which shed flysch sediments eastward into the Copper basin. The Wood River Formation of Pennsylvanian and Permian age was then deposited over a subdued topography on the Milligen Formation. The Hailey Conglomerate Member at the base of the Wood River filled many irregularities in the surface. This depositional contact later was largely destroyed and the contact between the Milligen and Wood River is now a regional thrust fault at most places.
Pre-, syn-, and postcollisional stratigraphic framework and provenance of upper triassic-upper cretaceous strata in the northwestern talkeetna mountains, alaska
Mesozoic strata of the northwestern Talkeetna Mountains are located in a regional suture zone between the allochthonous Wrangellia composite terrane and the former Mesozoic continental margin of North America (i.e., the Yukon-Tanana terrane). New geologic mapping, measured stratigraphic sections, and provenance data define a distinct three-part stratigraphy for these strata. The lowermost unit is greater than 290 m thick and consists of Upper Triassic-Lower Jurassic mafic lavas, fossiliferous limestone, and a volcaniclastic unit that collectively we informally refer to as the Honolulu Pass formation. The uppermost 75 m of the Honolulu Pass formation represent a condensed stratigraphic interval that records limited sedimentation over a period of up to ca. 25 m.y. during Early Jurassic time. The contact between the Honolulu Pass formation and the overlying Upper Jurassic-Lower Cretaceous clastic marine strata of the Kahiltna assemblage represents a ca. 20 m.y. depositional hiatus that spans the Middle Jurassic and part of Late Jurassic time. The Kahiltna assemblage may to be up to 3000 m thick and contains detrital zircons that have a robust U-Pb peak probability age of 119.2 Ma (i.e., minimum crystallization age/maximum depositional age). These data suggest that the upper age of the Kahiltna assemblage may be a minimum of 10-15 m.y. younger than the previously reported upper age of Valanginian. Sandstone composition (Q-43% F-30% L-27%-Lv-71% Lm-18% Ls-11%) and U-Pb detrital zircon ages suggest that the Kahiltna assemblage received igneous detritus mainly from the active Chisana arc, remnant Chitina and Talkeetna arcs, and Permian-Triassic plutons (Alexander terrane) of the Wrangellia composite terrane. Other sources of detritus for the Kahiltna assemblage were Upper Triassic-Lower Jurassic plutons of the Taylor Mountains batholith and Devonian-Mississippian plutons; both of these source areas are part of the Yukon-Tanana terrane. The Kahiltna assemblage is overlain by previously unrecognized nonmarine strata informally referred to here as the Caribou Pass formation. This unit is at least 250 m thick and has been tentatively assigned an Albian-Cenomanian-to-younger age based on limited palynomorphs and fossil leaves. Sandstone composition (Q-65% F-9% L-26%-Lv-28% Lm-52% Ls-20%) from this unit suggests a quartz-rich metamorphic source terrane that we interpret as having been the Yukon-Tanana terrane. Collectively, provenance data indicate that there was a fundamental shift from mainly arc-related sediment derivation from sources located south of the study area during Jurassic-Early Cretaceous (Aptian) time (Kahiltna assemblage) to mainly continental margin-derived sediment from sources located north and east of the study area by Albian-Cenomanian time (Caribou Pass formation). We interpret the threepart stratigraphy defined for the northwestern Talkeetna Mountains to represent pre- (the Honolulu Pass formation), syn- (the Kahiltna assemblage), and post- (the Caribou Pass formation) collision of the Wrangellia composite terrane with the Mesozoic continental margin. A similar Mesozoic stratigraphy appears to exist in other parts of south-central and southwestern Alaska along the suture zone based on previous regional mapping studies. New geologic mapping utilizing the three-part stratigraphy interprets the northwestern Talkeetna Mountains as consisting of two northwest-verging thrust sheets. Our structural interpretation is that of more localized thrust-fault imbrication of the three-part stratigraphy in contrast to previous interpretations of nappe emplacement or terrane translation that require large-scale displacements. Copyright ?? 2007 The Geological Society of America.
Highly conductive horizons in the Mesoproterozoic Belt-Purcell Basin: Sulfidic early basin strata as key markers of Cordilleran shortening and Eocene extension
We investigated the crustal structure of the central Mesoproterozoic Belt Basin in northwestern Montana and northern Idaho using a crustal resistivity section derived from a transect of new short- and long-period magnetotelluric (MT) stations. Two- and three-dimensional resistivity models were generated from these data in combination with data collected previously along three parallel short-period MT profiles and from EarthScope MT stations. The models were interpreted together with coincident deep seismic-reflection data collected during the Consortium for Continental Reflection Profiling (COCORP) program. The upper-crustal portion of the resistivity model correlates well with the mapped surface geology and reveals a three-layer resistivity stratigraphy, best expressed beneath the axis of the Libby syncline. Prominent features in the resistivity models are thick conductive horizons that serve as markers in reconstructing the disrupted basin stratigraphy. The uppermost unit (up to 5 km thick), consisting of all of the Belt Supergroup above the Prichard Formation, is highly resistive (1000–10,000 Ω·m) and has relatively low seismic layer velocities. The intermediate unit (up to 7 km thick) consists of the exposed Prichard Formation and 3+ km of stratigraphy below the deepest stratigraphic exposures of the unit. The intermediate unit has low to moderate resistivity (30–200 Ω·m), relatively high seismic velocities, and high seismic reflectivity, with the latter two characteristics resulting from an abundance of thick syndepositional mafic sills. The lowest unit (5–10 km thick) is nowhere exposed but underlies the intermediate unit and has very high conductivity (4–8 Ω·m) and intermediate seismic velocities. This 17–22-km-thick three-layer stratigraphy is repeated below the Libby syncline, with a base at ~37 km depth. Seismic layer velocities indicate high mantle-like velocities below 37 km beneath the Libby syncline. The continuous high-conductivity layer in the lower repeated section is apparently displaced ~26 km to the east above a low-angle normal fault inferred to be the downdip continuation of the Eocene, east-dipping Purcell Trench detachment fault. Reversal of that and other Eocene displacements reveals a >50-km-thick crustal section at late Paleocene time. Further reversal of apparent thrust displacements of the three-layer stratigraphy along the Lewis, Pinkham, Libby, and Moyie thrusts allows construction of a restored cross section prior to the onset of Cordilleran thrusting in the Jurassic. A total of ~220 km of Jurassic–Paleocene shortening along these faults is indicated. The enhanced conductivity within the lowest (unexposed) Belt stratigraphic unit is primarily attributed to one or more horizons of laminated metallic sulfides; graphite, though not described within the Belt Supergroup, may also contribute to the enhanced conductivity of the lowest stratigraphic unit. A narrow conductive horizon observed within the Prichard Formation in the eastern part of the transect correlates with the stratigraphic position of the world-class Sullivan sedimentary exhalative massive sulfide deposit in southern British Columbia, and it may represent a distal sulfide blanket deposit broadly dispersed across the Belt Basin. By analogy, the thick conductive sub–Prichard Formation unit may represent repeated sulfide depositional events within the early rift history of the basin, potentially driven by hydrothermal fluids released during basaltic underplating of attenuated continental crust.
Geotechnical soil characterization of intact Quaternary deposits forming the March 22, 2014 SR-530 (Oso) landslide, Snohomish County, Washington
During the late morning of March 22, 2014, a devastating landslide occurred near the town of Oso, Washington. The landslide with an estimated volume of 10.9 million cubic yards (8.3 x 10 6 m 3 ) of both intact glacially deposited and previously disturbed landslide sediments, reached speeds averaging 40 miles per hour (64 kilometers per hour) and crossed the entire 2/3-mile (~1100 m) width of the adjacent North Fork Stillaguamish River floodplain in approximately 60 seconds, resulting in the complete destruction of an entire neighborhood (Iverson and others, 2015). More than 40 homes were destroyed as the debris overran the neighborhood, resulting in the deaths of 43 people. Landslides in glacial deposits are common in the Pacific Northwest (for example, Baum and others, 2008), and in fact, the site of the March 22, 2014 SR-530 landslide had experienced significant reactivation several times in past decades, with the most recent event occurring in 2006 (for example, Miller and Sias, 1998). However, these previous landslides were of considerably less volume and mobility (Iverson and others, 2015), and debris had never reached the Steelhead Haven neighborhood. Further, no landslides with the type of mobility that the March 22, 2014 landslide underwent have been recorded in historic times within the North Fork Stillaguamish River valley. However, mapping performed immediately following the landslide indicates that several other slopes in the North Fork Stillaguamish River valley have experienced large-volume landslides exhibiting high mobility in prehistoric times (Haugerud, 2014). The presence of previous high-mobility landslides in the valley, and the now well-documented occurrence of one involving many fatalities, underscores both the hazard and risk for those that live and travel in this and other river valleys in the Pacific Northwest with similar glacial deposits and precipitation patterns. To understand the hazards posed by highly mobile landslides in the Pacific Northwest, the U.S. Geological Survey (USGS), together with its project partners, the University of California, Berkeley Department of Civil and Environmental Engineering (UCB), and the Washington State Department of Transportation (WSDOT), is undertaking a critically needed study to identify the geologic, hydrogeologic, and geotechnical conditions in which these large landslides initiate, as well as the processes responsible for the exceptional mobility of this, and potentially other, landslides in the region. One of the first study activities involves characterizing the stratigraphy and materials from which the landslide deposits are derived, so that the fundamental geotechnical nature of the soils can be understood. This understanding is required to begin identifying possible conditions leading to slope failure and their relation to the landslide's high mobility. In addition, detailed characterization of each stratigraphic unit encountered in initial geotechnical borings is needed to relate stratigraphy between borings for this study and as a part of ongoing investigations by WSDOT and other project partners. This report provides a description of the methods used to obtain and test the intact soil stratigraphy behind the headscarp of the March 22 landslide. Detailed geotechnical index testing results are presented for 24 soil samples representing the stratigraphy at 19 different depths along a 650 ft (198 m) soil profile. The results include (1) the soil's in situ water content and unit weight (where applicable); (2) specific gravity of soil solids; and (3) each sample's grain-size distribution, critical limits for fine-grain water content states (that is, the Atterberg limits), and official Unified Soil Classification System (USCS) designation. In addition, preliminary stratigraphy and geotechnical relations within and between soil units are presented.
Importance of geologic characterization of potential low-level radioactive waste disposal sites
Using the example of the Geff Alternative Site in Wayne County, Illinois, for the disposal of low-level radioactive waste, this paper demonstrates, from a policy and public opinion perspective, the importance of accurately determining site stratigraphy. Complete and accurate characterization of geologic materials and determination of site stratigraphy at potential low-level waste disposal sites provides the frame-work for subsequent hydrologic and geochemical investigations. Proper geologic characterization is critical to determine the long-term site stability and the extent of interactions of groundwater between the site and its surroundings. Failure to adequately characterize site stratigraphy can lead to the incorrect evaluation of the geology of a site, which in turn may result in a lack of public confidence. A potential problem of lack of public confidence was alleviated as a result of the resolution and proper definition of the Geff Alternative Site stratigraphy. The integrity of the investigation was not questioned and public perception was not compromised. ?? 1991 Springer-Verlag New York Inc.
Reading the climate record of the martian polar layered deposits
The martian polar regions have layered deposits of ice and dust. The stratigraphy of these deposits is exposed within scarps and trough walls and is thought to have formed due to climate variations in the past. Insolation has varied significantly over time and caused dramatic changes in climate, but it has remained unclear whether insolation variations could be linked to the stratigraphic record. We present a model of layer formation based on physical processes that expresses polar deposition rates of ice and dust in terms of insolation. In this model, layer formation is controlled by the insolation record, and dust-rich layers form by two mechanisms: (1) increased summer sublimation during high obliquity, and (2) variations in the polar deposition of dust modulated by obliquity variations. The model is simple, yet physically plausible, and allows for investigations of the climate control of the polar layered deposits (PLD). We compare the model to a stratigraphic column obtained from the north polar layered deposits (NPLD) (Fishbaugh, K.E., Hvidberg, C.S., Byrne, S., Russel, P.S., Herkenhoff, K.E., Winstrup, M., Kirk, R. [2010a]. Geophys. Res. Lett., 37, L07201) and show that the model can be tuned to reproduce complex layer sequences. The comparison with observations cannot uniquely constrain the PLD chronology, and it is limited by our interpretation of the observed stratigraphic column as a proxy for NPLD composition. We identified, however, a set of parameters that provides a chronology of the NPLD tied to the insolation record and consistently explains layer formation in accordance with observations of NPLD stratigraphy. This model dates the top 500 m of the NPLD back to ∼1 million years with an average net deposition rate of ice and dust of 0.55 mm a−1. The model stratigraphy contains a quasi-periodic ∼30 m cycle, similar to a previously suggested cycle in brightness profiles from the NPLD (Laskar, J., Levrard, B., Mustard, F. [2002]. Nature, 419, 375–377; Milkovich, S., Head, J.W. [2005]. J. Geophys. Res. 110), but here related to half of the obliquity cycles of 120 and 99 kyr and resulting from a combination of the two layer formation mechanisms. Further investigations of the non-linear insolation control of PLD formation should consider data from other geographical locations and include radar data and other stratigraphic datasets that can constrain the composition and stratigraphy of the NPLD layers.
Historical trace metal accumulation in the sediments of an urbanized region of the Lake Champlain watershed, Burlington, Vermont
This study documents the history of pollution inputs in the Burlington region of Lake Champlain, Vermont using measurements of anthropogenic metals (Cu, Zn, Cr, Pb, Cd, and Ag) in four age-dated sediment cores. Sediments record a history of contamination in a region and can be used to assess the changing threat to biota over time and to evaluate the effectiveness of discharge regulations on anthropogenic inputs. Grain size, magnetic susceptibility, radiometric dating and pollen stratigraphy were combined with trace metal data to provide an assessment of the history of contamination over the last 350 yr in the Burlington region of Lake Champlain. Magnetic susceptibility was initially used to identify land-use history for each site because it is a proxy indicator of soil erosion. Historical trends in metal inputs in the Burlington region from the seventeenth through the twentieth centuries are reflected in downcore variations in metal concentrations and accumulation rates. Metal concentrations increase above background values in the early to mid nineteenth century. The metal input rate to the sediments increases around 1920 and maximum concentrations and accumulation rates are observed in the late 1960s. Decreases in concentration and accumulation rate between 1970 and the present are observed, for most metals. The observed trends are primarily a function of variations in anthropogenic inputs and not variations in sediment grain size. Grain size data were used to remove texture variations from the metal profiles and results show trends in the anthropogenic metal signals remain. Radiometric dating and pollen stratigraphy provide well-constrained dates for the sediments thereby allowing the metal profiles to be interpreted in terms of land-use history.This study documents the history of pollution inputs in the Burlington region of Lake Champlain, Vermont using measurements of anthropogenic metals (Cu, Zn, Cr, Pb, Cd, and Ag) in four age-dated sediment cores. Sediments record a history of contamination in a region and can be used to assess the changing threat to biota over time and to evaluate the effectiveness of discharge regulations on anthropogenic inputs. Grain size, magnetic susceptibility, radiometric dating and pollen stratigraphy were combined with trace metal data to provide an assessment of the history of contamination over the last 350 yr in the Burlington region of Lake Champlain. Magnetic susceptibility was initially used to identify land-use history for each site because it is a proxy indicator of soil erosion. Historical trends in metal inputs in the Burlington region from the seventeenth through the twentieth centuries are reflected in downcore variations in metal concentrations and accumulation rates. Metal concentrations increase above background values in the early to mid nineteenth century. The metal input rate to the sediments increases around 1920 and maximum concentrations and accumulation rates are observed in the late 1960s. Decreases in concentration and accumulation rate between 1970 and the present are observed for most metals. The observed trends are primarily a function of variations in anthropogenic inputs and not variations in sediment grain size. Grain size data were used to remove texture variations from the metal profiles and results show trends in the anthropogenic metal signals remain. Radiometric dating and pollen stratigraphy provide well-constrained dates for the sediments thereby allowing the metal profiles to be interpreted in terms of land-use history.
Sediment compaction rates and subsidence in deltaic plains: Numerical constraints and stratigraphic influences
Natural sediment compaction in deltaic plains influences subsidence rates and the evolution of deltaic morphology. Determining compaction rates requires detailed knowledge of subsurface geotechnical properties and depositional history, neither of which is often readily available. To overcome this lack of knowledge, we numerically forward model the incremental sedimentation and compaction of stochastically generated stratigraphies with geotechnical properties typical of modern depositional environments in the Mississippi River delta plain. Using a Monte Carlo approach, the range of probable compaction rates for stratigraphies with compacted thicknesses <150 m and accumulation times <20 kyr. varies, but maximum values rarely exceed a few mm yr −1 . The fastest compacting stratigraphies are composed primarily of peat and bar sand, whereas the slowest compacting stratigraphies are composed of prodelta mud and natural levee deposits. These results suggest that compaction rates can significantly influence vertical and lateral stratigraphic trends during deltaic evolution.