Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

Geologic map of the Bernalillo NW quadrangle, Sandoval County, New Mexico

The Bernalillo NW quadrangle is located in the northern part of the Albuquerque basin, which is the largest basin or graben within the Rio Grande rift. The quadrangle is underlain by poorly consolidated sedimentary rocks of the Santa Fe Group. These rocks are best exposed in the southwestern part of the quadrangle in the Rincones de Zia, a badland topography cut by northward-flowing tributary arroyos of the Jemez River. The Jemez River flows through the northern half of the quadrangle; extensive fluvial and eolian deposits cover bedrock units along the river. The structural fabric of the quadrangle is dominated by dozens of generally north striking, east and west-dipping normal faults and minor folds associated with the Neogene Rio Grande rift.

Miscellaneous Field Studies Map↗

Surficial geology along the Spokane River, Washington and its relationship to the metal content of sediments (Idaho-Washington stateline to Latah Creek confluence)

The purpose of this study is 1. to document the geographic distribution of Holocene (deposited in the last 11,000 years) sedimentary lithologies in and along the Spokane River, 2. to document the downstream variation of metal contents (especially lead [Pb] and zinc [Zn] ) by sedimentary lithology, and 3. to compare the metal contents of different sedimentary lithologies. This data is used to gain some understanding of the physical and chemical processes that control those metal contents. It is hoped this study can be used to guide potential future remedial actions aimed at reducing the biologic impact of metal-enriched sediments in this area. This work was undertaken in cooperation with the Washington Department of Ecology and the Environmental Protection Agency.

Idaho, Washington↗

Geology of the Konakpinar--Sarica area, Sivas Province, Turkey

The junction of several major structures and stratigraphic sequences is in the Konakpinar-Sarica area of central Turkey. Most of the area is underlain by Upper Jurassic to Cretaceous limeston and siltstone, early Tertiary sedimentary rock, and remnants of younger volcanic rocks and lacustrine deposits. The northeastern part of the area, however, is formed of serpentinite, of possible Cretaceous age, unconformably overlain by Upper Cretaceous conglomerate and siltstone that crop out extensively east of the area. The regional structure changes direction in the area. Folds and faults change across a northerly striking hinge line from northeast trends on the west to northwest trends on the east. A north-trending regional fault zone is a little east of the hinge line. The northern part of this fault zone and a northwest-striking fault, a possible thrust, east of it form the boundary between the two stratigraphic provinces. The area northeast of this boundary is cut by a series of vertical northwest-trending faults that are downdropped on the southwest. A large northeast-trending fault that is part of a broad fault zone that extends from the Mediterranean Sea northeastward to Divrigi is in the northwest corner of the area. Some thrust faults cut the Cretaceous rocks in the western part of the area; the Upper Jurassic limestone may be allochthonous. The only economic deposit known in the area is at the Otlukilise Iron Mine where iron is present in a sedimentary filling of sinkholesand as secondary replacement deposits in limestone at their borders. Minor deposits of chrome, copper, and coal also occur in the area.

Open-File Report↗

Geologic framework of the regional ground-water flow system in the Upper Deschutes Basin, Oregon

Ground water is increasingly relied upon to satisfy the needs of a growing population in the upper Deschutes Basin, Oregon. Hydrogeologic studies are being undertaken to aid in management of the ground-water resource. An understanding of the geologic factors influencing ground-water flow is basic to those investigations. The geology of the area has a direct effect on the occurrence and movement of ground water. The permeability and storage properties of rock material are influenced by the proportion, size, and degree of interconnection of open spaces the rocks contain. These properties are the result of primary geologic processes such as volcanism and sedimentation, as well as subsequent processes such as faulting, weathering, or hydrothermal alteration. The geologic landscape in the study area evolved during about 30 million years of volcanic activity related to a north-south trending volcanic arc, the current manifestation of which are today’s Cascade Range volcanoes. The oldest rock unit in the upper Deschutes Basin study area, the John Day Formation, is a sequence of upper Eocene to lower Miocene volcanic and sedimentary rocks. Weathering and alteration of the rocks has resulted in very low permeability; consequently, the unit forms the hydrologic basement for the regional ground- water flow system throughout much of the area. The Deschutes Formation and age-equivalent deposits that overlie the John Day Formation, in contrast, are highly permeable and are the most widely used ground-water-bearing units in the study area. The Deschutes Formation consists of a variety of volcanic and sedimentary deposits ranging in age from late Miocene to Pliocene (approximately 7.5 to 4.0 million years). Three distinct depositional environments previously described for the formation provide useful hydrogeologic subdivisions. The ancestral Deschutes River deposits and some units within the arc- adjacent alluvial-plain region are among the highest yielding units within the Deschutes Formation, with some wells producing up to a few thousand gallons per minute. Opal Springs basalt, Pelton basalt, and the rhyodacite dome complex near Steelhead Falls are particularly productive subunits within the Deschutes Formation and provide tens to hundreds of cubic feet per second of ground-water discharge to the Deschutes and Crooked Rivers, upstream of Round Butte Dam. Most ground-water recharge in the upper Deschutes Basin occurs in Quaternary deposits of the Cascade Range and Newberry Volcano. These deposits are highly permeable, and the fractured character of the lava flows facilitates rapid infiltration of precipitation and snowmelt, as well as movement of ground water to lower elevations. Additional recharge from canal leakage occurs along sections of unlined canals near Bend, constructed on lava flows from Newberry Volcano. Hydrothermal alteration and secondary mineralization at depth beneath the Cascade Range and Newberry Volcano has drastically reduced the permeability of the material in those regions, effectively restricting most ground water to the strata above the altered rocks. The top of the hydrothermally altered region is considered the base of the regional ground-water system beneath the Cascade Range and Newberry Volcano. Structural features influence ground-water flow within the upper Deschutes Basin mainly by juxtaposing materials with contrasting permeability. This juxtaposition can be caused by fault movement or by the influence of a fault on subsequent deposition. Several depositional centers have formed along the base of fault-line scarps or in grabens within the study area, and the infilling sedimentary deposits have permeability that differs from the surrounding rocks. The effects of faults on ground-water flow may be masked in some areas. For example, the water-table gradient changes slope in the vicinity of the Sisters fault zone, but the slope change also corresponds with a major precipitation gradient change; therefore, any influence of the fault zone is unclear. Geologic units in the Deschutes Basin were divided into several distinct hydrogeologic units. In some instances the units correspond to existing stratigraphic divisions. In other instances, hydrogeologic units correspond to different facies within a single stratigraphic unit or formation. The hydrogeologic units include Quaternary sediment, deposits of the Cascade Range and Newberry Volcano, four zones within the Deschutes Formation and age-equivalent rocks that roughly correspond with depositional environments, and pre-Deschutes-age strata.

Water-Resources Investigations Report↗

Uraniferous opal, Virgin Valley, Nevada: Conditions of formation and implications for uranium exploration

Uraniferous, fluorescent opal, which occurs in tuffaceous sedimentary rocks at Virgin Valley, Nevada, records the temperature and composition of uranium-rich solutions as well as the time of uranium-silica coprecipitation. Results are integrated with previous geologic and geochronologic data for the area to produce a model for uranium mobility that may be used to explore for uranium deposits in similar geologic settings. Uraniferous opal occurs as replacements of diatomite, or silicic air-fall ash layers in tuffaceous lakebeds of the Virgin Valley Formation (Miocene) of Merriam (1907). Fission-track radiography shows uranium to be homogeneously dispersed throughout the opal structure, suggesting coprecipitation of dissolved uranium and silica gel. Fluid inclusions preserved within opal replacements of diatomite have homogenization temperatures in the epithermal range and are of low salinity. Four samples of opal from one locality all have U-Pb apparent ages which suggest uraniferous opal precipitation in late Pliocene time. These ages correspond to a period of local, normal faulting, and highangle faults may have served as vertical conduits for transport of deep, thermalized ground water to shallower levels. Lateral migration of rising solutions occurred at intersections of faults with permeable strata. Silica and some uranium were dissolved from silica-rich host strata of 5–20 ppm original uranium content and reprecipitated as the solutions cooled. The model predicts that in similar geologic settings, ore-grade concentrations of uranium will occur in permeable strata that intersect high-angle faults and that contain uranium source rocks as well as efficient reductant traps for uranium. In the absence of sufficient quantities of reductant materials, uranium will be flushed from the system or will accumulate in low-grade disseminated hosts such as uraniferous opal.

Nevada↗

Curiosity’s robotic arm-mounted Mars Hand Lens Imager (MAHLI): Characterization and calibration status

MAHLI (Mars Hand Lens Imager) is a 2-megapixel, Bayer pattern color CCD camera with a macro lens mounted on a rotatable turret at the end of the 2-meters-long robotic arm aboard the Mars Science Laboratory rover, Curiosity. The camera includes white and longwave ultraviolet LEDs to illuminate targets at night. Onboard data processing services include focus stack merging and data compression. Here we report on the results and status of MAHLI characterization and calibration, covering the pre-launch period from August 2008 through the early months of the extended surface mission through February 2015. Since landing in Gale crater in August 2012, MAHLI has been used for a wide range of science and engineering applications, including distinction among a variety of mafic, siliciclastic sedimentary rocks; investigation of grain-scale rock, regolith, and eolian sediment textures and structures; imaging of the landscape; inspection and monitoring of rover and science instrument hardware concerns; and supporting geologic sample selection, extraction, analysis, delivery, and documentation. The camera has a dust cover and focus mechanism actuated by a single stepper motor. The transparent cover was coated with a thin film of dust during landing, thus MAHLI is usually operated with the cover open. The camera focuses over a range from a working distance of 2.04 cm to infinity; the highest resolution images are at 13.9 µm per pixel; images acquired from 6.9 cm show features at the same scale as the Mars Exploration Rover Microscopic Imagers at 31 µm/pixel; and 100 µm/pixel is achieved at a working distance of ~26.5 cm. The very highest resolution images returned from Mars permit distinction of high contrast silt grains in the 30–40 µm size range. MAHLI has performed well; the images need no calibration in order to achieve most of the investigation’s science and engineering goals. The positioning and repeatability of robotic arm placement of the MAHLI camera head have been excellent on Mars, often with the hardware arriving within millimeters of expectation. Stability while imaging is usually such that the images are sharply focused; some exceptions—thought to result from motion induced by wind—have occurred during longer exposure LED-illuminated night imaging. Image calibration includes relative radiometric correction by removal of dark current and application of a flat field. Dark current is negligible to minor for typical daytime exposure durations and temperatures at the Gale field site. A pre-launch flat field product is usually applied to the data but new products created from images acquired by MAHLI of the Martian sky are superior and can provide a relative radiometric accuracy of ~6%. The camera lens imparts negligible distortion to its images; camera models derived from pre-launch data, with CAHV and CAHVOR parameters captured in their archived labels, can be applied to the images for analysis. MAHLI data and derived products, including pre-launch images, are archived with the NASA Planetary Data System (PDS). This report includes supplementary calibration and characterization data that are not available in the PDS archive (see supplement file MAHLITechRept0001_Supplement.zip).

MSL MAHLI Technical Report↗

Hydrology of area 53, northern Great Plains and Rocky Mountain coal provinces, Colorado, Wyoming, and Utah

Hydrologic information and analysis are needed to aid in decisions to lease Federally owned coal and for the preparation of the necessary Environmental Assessments and Impact Study Reports. This need has become even more critical with the enactment of the Surface Mining Control and Reclamation Act of 1977 (Public Law 95-87). This report, one in a series of nationwide coal province reports, presents information thematically by describing single hydrologic topics through the use of brief texts and accompanying maps, graphs, or other illustrations. The report broadly characterizes the hydrology of Area 53 in northwestern Colorado, south-central Wyoming, and northeastern Utah. The report area, located primarily in the Wyoming Basin and Colorado Plateau physiographic provinces, consists of 14,650 square miles of diverse geology, topography, and climate. This diversity results in contrasting hydrologic characteristics. The two major rivers, the Yampa and the White Rivers, originate in humid granitic and basaltic mountains, then flow over sedimentary rocks underlying semiarid basins to their respective confluences with the Green River. Altitudes range from 4,800 to greater than 12,000 feet above sea level. Annual precipitation in the mountains, as much as 60 inches, is generally in the form of snow. Snowmelt produces most streamflow. Precipitation in the lower altitude sedimentary basins, ranging from 8 to 16 inches, is generally insufficient to sustain streamflow; therefore, most streams originating in the basins (where most of the streams in coal-mining areas originate) are ephemeral. Streamflow quality is best in the mountains where dissolved-solids concentrations generally are small. As streams flow across the sedimentary basins, mineral dissolution from the sedimentary rocks and irrigation water with high mineral content increase the dissolved-solids concentrations in a downstream direction. Due to the semiarid climate of the basins, soils are not adequately leached; consequently, flows in the ephemeral streams usually have larger concentrations of dissolved solids than those in perennial streams. Ground-water supplies are restricted by the low yields of wells due to small permeability. Most ground-water use is for domestic and stock-watering purposes; it is limited by the amount and type of dissolved material. The ground-water ionic composition is highly variable. Dissolved-solids concentrations for aquifers sampled in Area 53 range from a minimum of 46 milligrams per liter to a maximum of 109,000 milligrams per liter. Trace element concentrations generally are not a problem. An estimated 82 billion tons of coal exist above a depth of 6,000 feet in the Colorado parts of the area. The coal beds of greatest economic interest occur in the sedimentary deposits of the Upper Cretaceous Iles and Williams Fork Formations of the Mesaverde Group and the Upper Cretaceous Lance Formation and the Fort Union and Wasatch Formations of Tertiary age. The coal characteristically has a low sulfur content. Hydrologic problems related to surface mining are erosion, sedimentation, decline in water levels, disruption of aquifers, and degradation of water quality. Because the semiarid mine areas have very little runoff and the major streams have large buffer and dilution capacities, the effects of mining on surface water are minimal. However, effects on ground water may be much more severe and long lasting.

Colorado, Wyoming and Utah↗

Status of groundwater quality in the San Fernando--San Gabriel study unit, 2005--California GAMA Priority Basin Project

Groundwater quality in the approximately 460-square-mile San Fernando--San Gabriel (FG) study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study area is in Los Angeles County and includes Tertiary-Quaternary sedimentary basins situated within the Transverse Ranges of southern California. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA FG study was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer systems (hereinafter referred to as primary aquifers) throughout California. The assessment is based on water-quality and ancillary data collected in 2005 by the USGS from 35 wells and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifers were defined by the depth interval of the wells listed in the CDPH database for the FG study unit. The quality of groundwater in primary aquifers may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. This study assesses the status of the current quality of the groundwater resource by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifers of the FG study unit, not the treated drinking water delivered to consumers by water purveyors.

California↗

Tin, copper, and uranium at Majuba Hill, Nevada

Uranium minerals occur with ores of copper, tin, and silver at Majuba Hill, Nevada. During World War I, the Majuba Hill mine produced about 4,000 tons of 12 percent copper ore, and during World War II about 23,000 tons of ore containing 2 to 4 percent copper and enough tin ore to furnish from 10 to 15 tons of metallic tin. No uranium has been produced. The bedrock geology of Majuba Hill consists of a complex; volcanic neck or plug composed of rhyolite porphyry, porphyritic rhyolite, quartz feldspar porphyry, breccia dikes, and irregular breccia masses. This plug intruded Triassic (?) sedimentary rocks, chiefly shale. The principal loci of ore deposition were (l) parts of the breccia bodies, particularly where they were porous and where they were silicified and tourmalinized, and (2) a few small pre-mineral fractures adjacent to the breccia masses, Intense hydrothermal alteration resulted in the formation of sericite, quartz, and tourmaline in the wall rocks. This was accompanied or followed by deposition of arsenopyrite, pyrite, cassiterite, fluorite, and several primary sulfide minerals of copper. All of the ore bodies exposed in the mine are highly oxidized, and a profusion of secondary minerals of copper and iron have been found. The only uranium minerals detected are the phosphates torbernite and matatorbernite and the arsenate zeunerite. These are widely disseminated throughout the mine in small amounts associated with the secondary minerals of copper and iron along minor fault surfaces, bedding planes in the shale, and in porous parts of the breccia. A primary uranium mineral has not been found. The secondary uranium minerals appear to be most abundant where copper ore is highest grade. Although unoxidized uranium ore has not been found, it is inferred from this relation that the deposition of the original uranium minerals favored those areas where primary copper mineralization was most intense. There may have been an intimate association of uranium with silver in the ore, but this has not been established. The U 3 O 8 content of samples of copper ore ranges from .0.002 to 0.30 percent. Because the bottom of the oxidized ore has not been reached in mining or exploration, the downward extensions of the known ore bodies of secondary minerals would appear to be worthy of investigation to determine the grade and extent of the primary ore.

Nevada↗

Perspectives on premetamorphic stratabound tourmalinites

Stratabound tourmalinites are metallogenically important rocks that locally show a close spatial association with diverse types of mineralization, especially volcanogenic massive sulfides (VMS) and clastic-dominated (CD) Zn-Pb deposits. These tourmalinite occurrences pan the geologic record from Eoarchean to Jurassic. Host lithologies are dominated by clastic metasedimentary rocks but in some areas include metavolcanic rocks, marble, or metaevaporites. Stratabound and stratiform (conformable) tourmalinites commonly display sedimentary structures such as graded beds, cross-beds, and rip-up clasts. In most cases, field and microtextural relationships are consistent with a synsedimentary to the early diagenetic introduction of boron as a precursor to tourmaline formation. Whole-rock geochemical data for major, trace, and rare earth elements (REE) provide valuable insights into tourmalinite origins. Al-normalized values relative to those for least-altered host metasedimentary rocks suggest that tourmalinites in proximal settings at or near hydrothermal vent sites characterized by high fluid/rock regimes (e.g., Sullivan Pb-Zn-Ag deposit, Canada) have very different signatures than those in low fluid/rock, distal settings (e.g., Broken Hill Pb-Zn-Ag deposit, Australia). The high fluid/rock regimes at Sullivan show large mass changes of +60 % for Mg and +180 % for Mn, as well as large variations in abundances of light and middle REE. In contrast, tourmalinite formation in low fluid/rock regimes yields minimal Al-normalized changes in major elements, trace elements, and REE. Boron isotope values of tourmalinite-hosted tourmaline vary widely from -26.1 to +27.5 ‰, and are attributed mainly to boron sources (e.g., sediments, evaporites) with generally minor influence from processes such as formational temperature, fluid/rock ratio, and secular variation in seawater δ 11 B values. Laterally extensive stratiform tourmalinites formed mainly by syngenetic or early diagenetic processes on or beneath the seafloor. The syngenetic process is attributed to the interaction of vented B-rich brines with aluminous minerals in sediments, whereas the diagenetic process involves the selective replacement of aluminous sediments by B-rich fluids. Modern examples of tourmalinites, as yet undiscovered, may exist in metalliferous sediments of the Red Sea and the eastern Pacific Ocean, in altered volcaniclastic sediments within active seafloor-hydrothermal systems of the South Pacific, and in hydrothermal mounds and vents associated with mafic sill complexes in extensional basins as in the North Sea and South China Sea. Stratabound tourmalinites that contain base-metal sulfides, high Mn concentrations (>1 wt. % MnO), or positive Eu anomalies can be valuable exploration guides for base-metal sulfide deposits in sedimentary and volcanic terranes.

Journal of Geosciences↗

Preliminary geologic map of the Wadi As Sirhan Quadrangle, sheet 30C, Kingdom of Saudi Arabia

The Wadi as Sirhan quadrangle lies in the northwestern pan of Saudi Arabia on the border with Jordan. It is located in the west-central part of the Sirhan-Turayf basin and is underlain by Silurian to Miocene-Pliocene sedimentary rocks that are partly covered by volcanic flows. The map area also contains large areas of surficial sand and gravel. The study area is mainly a structural depression formed by the Wadi as Sirhan graben complex, and it is flanked by highlands of moderate altitude. The Wadi as Sirhan graben is believed to have been formed by tensional forces associated with rifting in the Red Sea. The map area contains the Thaniyat, Ghinah, and Arqah phosphorite members, and the phosphate-bearing Sib member. Hypothetical estimates of mineral resource potential of the phosphate rock in the quadrangle are high, but most prospects are either covered with too much overburden or are too thin and of too low a grade to be considered for economic exploitation at this time. Several deep drill holes in the Wadi as Sirhan depression have penetrated thick sequences of marine rocks that are potential sources of oil and gas. Geological and geophysical conditions are favorable for the accumulation of hydrocarbons, and additional exploration is recommended.

Open-File Report↗

Resurgent cauldrons

Resurgent cauldrons are defined as cauldrons (calderas) in which the cauldron block, following subsidence, has been uplifted, usually in the form of a structural dome. Seven of the best known resurgent cauldrons are: Valles, Toba, Creede, San Juan, Silverton, Lake City, and Timber Mountain. Geologic summaries of these and Long Valley, California, a probable resurgent caldera, are presented. Using the Valles caldera as a model, but augmented by information from other cauldrons, seven stages of volcanic, structural, sedimentary, and plutonic events are recognized in the development of resurgent cauldrons. They are: (I) Regional tumescence and generation of ring fractures; (II) Calderaforming eruptions; (III) Caldera collapse; (IV) Preresurgence volcanism and sedimentation; (V) Resurgent doming; (VI) Major ring-fracture volcanism; (VII) Terminal solfatara and hot-spring activity. These stages define the terminal cycle of resurgent cauldrons, which in the Valles caldera spanned more than 1 million years. The known and inferred occurrence of the seven stages in the eight cauldrons discussed, together with some time control in four cauldrons, indicates that resurgent doming is early in the postcollapse history; hence, it seems part of a pattern and not fortuitous. Doming of the cauldron block by magma pressure is preferred to doming by stock or laccolithic intrusion, although these processes may be subsidiary. Magma rise that produces doming may be explained in several ways, but the principal cause is not known. Nor is it known why some otherwise similar calderas do not have resurgent domes, although size and thickness of the cauldron block and the degree to which it was deformed during caldera collapse may be factors. All known resurgent structures are larger than 8 miles in diameter and are associated with silicic and, presumably, high-viscosity magmas. Genetically, resurgent cauldrons belong to a cauldron group in which subsidence of a central mass takes place along ring fractures and is related to eruption of voluminous ash flows, thereby differing from Kilauean-type calderas. It is proposed that typical Krakatoan-type calderas differ in that collapse is chaotic and ring fractures are not essential to their formation. Krakatoan calderas typically occur in the andesitic volcanoes of island arcs or the eugeosynclinal environment, and their sub-volcanic analogues are not known, whereas resurgent and related Glen Coe-type cauldrons are more common in cratonic or post-orogenic environments as are their sub-volcanic analogues - granitic ring complexes. Granitic ring complexes, such as Lirue, Sande, Ossipee, and Alnsj0, are probably the closest sub-volcanic analogues of resurgent calderas. The source areas of most of the ash-flow sheets of western United States and Mexico are yet to be found. It is suggested that many of them will prove to be resurgent structures. Present evidence suggests that ore deposits are more commonly associated with resurgent cauldrons than with other cauldron types.

Memoir of the Geological Society of America↗

Geologic map of the west-central Buffalo National River region, northern Arkansas

This map summarizes the geology of the west-central Buffalo National River region in the Ozark Plateaus region of northern Arkansas. Geologically, the region lies on the southern flank of the Ozark dome, an uplift that exposes oldest rocks at its center in Missouri. Physiographically, the map area spans the Springfield Plateau, a topographic surface generally held up by Mississippian cherty limestone and the higher Boston Mountains to the south, held up by Pennsylvanian rocks. The Buffalo River flows eastward through the map area, enhancing bedrock erosion of an approximately 1,600-ft- (490-m-) thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. Quaternary surficial units are present as alluvial deposits along major streams, including a series of terrace deposits from the Buffalo River, as well as colluvium and landslide deposits mantling bedrock on hillslopes. This report provides a geologic map database of the map area that improves understanding of the regional geologic framework and its influence on the regional groundwater flow system. Furthermore, additional edits were made to the Ponca and Jasper quadrangles in the following ways: new control points on important contacts were obtained using modern GPS; recent higher resolution elevation data allowed further control on placement of contacts; some new contacts were added, in particular the contact separating the upper and lower Everton Formation.

Arkansas↗

Post-middle Miocene accretion of Franciscan rocks, northwestern California.

Deformed sedimentary rocks assigned to the Franciscan assemblage in the King Range S of Cape Mendocino, N California, are dominantly deep-water argillite and sandstone occurring as thick- to thin-bedded, locally channelized marine turbidities of arkosic to andesitic volcaniclastic composition. The King Range appears to be a displaced terrane of oceanic basement overlain by Palaeogene(?) and Neogene sedimentary and igneous rocks of continental and oceanic derivation.-Authors

Geological Society of America Bulletin↗

Geology of part of the southern complex, Marquette district, Michigan

The southern complex, south of the Marquette synclinorium in the Marquette district of Michigan, is dominantly granitic. The granitic parts of the complex have Rb-Sr ages of about 2.5 b.y. and are classed as of Precambrian W age. The rocks are divided into two major units: (1.) Bell Creek Gneiss consisting mostly of coarse megacrystic granitic rocks and lesser amounts of mafic gneiss and metasedimentary rocks in layers concordant to the foliation of the granitic gneiss, and (2) Compeau Creek Gneiss, previously described to the east, which is mostly medium-grained granitic gneiss and lesser amounts of massive granitic rocks and locally abundant xenoliths of mafic and metasedimentary rocks. Compeau Creek Gneiss intrudes Bell Creek Gneiss throughout the area. Mafic and metasedimentary rocks in the Bell Creek Gneiss are interpreted as remnants of a greenstone belt. The granitic parts of the Bell Creek Gneiss are of problematic origin. Their composition suggests a magmatic origin, but they do not intrude any rocks with which they are in contact; they form concordant layers in all observed places. Granitic parts of the Compeau Creek Gneiss are suspected to be highly altered and partly melted sedimentary rocks. The mafic parts are probably xenoliths of mafic rocks from the Bell Creek Gneiss.

Michigan↗

Implications for organic maturation studies of evidence of a geologically rapid increase and stabilization of vitrinite reflectance at peak temperature: Cerro Prieto geothermal system, Mexico

A short-term rapid heating and cooling of the rock in well M-94 below 1300 m was caused by a pulse of hot water passing through the edge of the Cerro Prieto, Mexico, geothermal system. Below 1300 m, the peak paleotemperatures were about 225-250 degrees C, but equilibrium well log temperatures indicate a decrease to 150-210 degrees C at present. This hot water pulse sharply increased vitrinite reflectance to levels comparable to those measured in the central part of the system, even though studies of apatite fission-track annealing indicate that the duration of heating was only 10{0}-10{1} yr in M-94, in contrast to 10{3}-10{4} yr in the central part of the system. These data indicate that sedimentary organic matter chemically reacts quickly to temperature increases of about 125 degrees C above ambient, even when the higher temperature existed for only 10{0}-10{1} yr. The quick change of the vitrinite reflectance geothermometer indicates that thermal maturation reactions can stabilize, after a geologically short period of heating, to a level consistent with peak temperature under moderate to high-temperature diagenesis in open, fluid-rich, geothermal systems. Cerro Prieto is one of the most intensively studied and well-known geothermal systems in the world. Thus, data from Cerro Prieto are a benchmark to compare with the predictions of published thermal maturation models such as those formulated by J. Karweil, N. V. Lopatin, and A. K. Burnham and J. J. Sweeney. These thermal maturation models inaccurately predict duration of heating at Cerro Prieto. The kinetic equations used in these models explicitly allow thermal maturation to continue indefinitely at peak temperature, which does not seem to be the case at Cerro Prieto.

Cerro Prieto fault↗

Carbon dioxide fluid-flow modeling and injectivity calculations

At present, the literature lacks a geologic-based assessment methodology for numerically estimating injectivity, lateral migration, and subsequent long-term containment of supercritical carbon dioxide that has undergone geologic sequestration into subsurface formations. This study provides a method for and quantification of first-order approximations for the time scale of supercritical carbon dioxide lateral migration over a one-kilometer distance through a representative volume of rock. These calculations provide a quantified foundation for estimating injectivity and geologic storage of carbon dioxide. A geologic-based approach was developed in which subsurface pressure and temperature conditions were held constant while the petrophysical properties of fractional porosity and matrix permeability were varied simultaneously. The Span and Wagner equations of state were used to determine thermophysical properties of carbon dioxide at appropriate reservoir conditions. The fluid-flow calculations assume mass transport through a laterally continuous, homogeneous isotropic formation and were based on two constitutive equations from fluid dynamics: hydraulic diffusivity for near-surface applications, and a modified version of Darcy's Law for deeper formations exhibiting higher pressure gradients. The first-order approximations of the lateral migration time scales, for both hydraulic diffusivity and Darcy flow, can be expressed as a quasi-linear function over a range of porosity and permeability values. This method is applicable to a substantial range of sedimentary formations exhibiting porosities up to 95 percent and permeabilities from 10.0 darcy to 1.0 picodarcy. These results were used to classify subsurface formations into three permeability classifications for the probabilistic calculations of storage efficiency and containment risk of the U.S. Geological Survey geologic carbon sequestration assessment methodology. This methodology is currently in use to determine the total carbon dioxide containment capacity of the onshore and State waters areas of the United States.

Scientific Investigations Report↗

Geology of the upper Killik-Itkillik region, Alaska

The upper Killik-Itkillik map area is a 2,500 square mile segment of foothills along the north front of the Brooks Range on the Arctic Slope of Alaska. The rocks exposed in this area include eleven formations of sedimentary rocks, three types of surficial deposits, and one igneous rock unit. The oldest rocks are a 2,500-foot sequence of limestone which belongs to the Lisburne group (Mississippian). The Lisburne is succeeded by the Siksikpuk formation (Permian ?), a 300-foot unit of variegated shale and siltstone. The Shublik formation (Triassic), composed of 200 to 750 feet of fossiliferous dark shale, limestone, and chart, rests upon the Siksikpuk. Next above the Shublik is a sequence, more than 13,000 feet thick, of marine shale and graywacke which is subdivided into four formations: Tiglukpuk (Late Jurassic), Okpikruak (earliest Cretaceous), Fortress Mountain (late Early Cretaceous), and Torok (late Early Cretaceous). The youngest rocks comprise the Nanushuk group (late Early to Late Cretaceous) which consists of 5,000 feet of interfingering marine and non-marine clastic rocks and is subdivided into three formations: Tuktu, Chandler, and Ninuluk. Small diabase sills, thought to be of latest Jurassic age, intrude the Tiglukpuk and older formations in the western part of the map area. The rocks of the map area have been deformed by north-south tectonic forces in such a way that the upper part of the crust appears to have moved northward relative to deeper parts. Five east-trending zones of distinctive lithology and structure are recognizable: zone I, at the mountain front-massive strata of the Lisburne group sliced by southward dipping imbricate faults and locally thrust upon the younger strata of the dipping imbricate faults and locally thrust upon the younger strata of the foothills, zone II—relatively incompetent interfolded late Paleozoic and Mesozoic strata characterized by isoclinal folds and by small, closely spaced high-angle faults, zone III--chiefly rocks of the Fortress Mountain formation which, although folded and faulted, are not as complexly deformed as the rocks of zone II, zone IV - highly crenulated shale of the Torok formation, and zone V, at the northern edge of the map area--gently folded strata of the Nanushuk group. A seismograph survey across zone IV suggests that, although the incompetent Torok formation is highly crenulated, the subsurface strata lie nearly flat. The character of the subsurface structure in zones II and III is uncertain. However, it is believed that some of the high-angle faults in these two zones may flatten in the subsurface and merge into large sole faults beneath thrust plates of Paleozoic limestone. Such a fault pattern has been found in the foothills of the Alberta Rockies, where the surface structure, stratigraphy and geologic history are remarkably similar. The depositional history of the Paleozoic and Mesozoic strata is divided into a shelf phase during late Paleozoic and Triassic and a geosynclinal phase during Late Jurassic and Cretaceous. The shelf sediments were chiefly marine carbonates and fine clastics, apparently derived largely from the north. The geosynclinal sediments consisted of marine graywacke "flysch" deposits overlain by littoral marine and non-marine coal-bearing "molasse" deposits and were derived mainly from the south. Several periods of emergence and erosion interrupted the shelf and geosynclinal deposition; evidently some folding and faulting occurred during deposition of the "flysch". The principal deformation is believed to have coincided with the Laramide orogeny in Late Cretaceous or Tertiary. In the Pleistocene the Brooks Range was intensively glaciated, and at times of maximum advance, ice tongues along the major river valleys pushed northward into the foothills.

Alaska↗