Search USGS⌕ Search

SEARCH · Search USGS

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

Three-dimensional simulations of ground motions in the Seattle region for earthquakes in the Seattle fault zone

We used the 3D finite-difference method to model observed seismograms of two earthquakes (ML 4.9 and 3.5) in the Seattle region and to simulate ground motions for hypothetical M 6.5 and M 5.0 earthquakes on the Seattle fault, for periods greater than 2 sec. A 3D velocity model of the Seattle Basin was constructed from studies that analyzed seismic-reflection surveys, borehole logs, and gravity and aeromagnetic data. The observations and the simulations highlight the importance of the Seattle Basin on long-period ground motions. For earthquakes occurring just south of the basin, the edge of the basin and the variation of the thickness of the Quaternary deposits in the basin produce much larger surface waves than expected from flat-layered models. The data consist of seismograms recorded by instruments deployed in Seattle by the USGS and the University of Washington (UW). The 3D simulation reproduces the peak amplitude and duration of most of the seismograms of the June 1997 Bremerton event (ML 4.9) recorded in Seattle. We found the focal mechanism for this event that best fits the observed seismograms in Seattle by combining Green's functions determined from the 3D simulations for the six fundamental moment couples. The February 1997 event (ML 3.5) to the south of the Seattle Basin exhibits a large surface-wave arrival at UW whose amplitude is matched by the synthetics in our 3D velocity model, for a source depth of 9 km. The M 6.5 simulations incorporated a fractal slip distribution on the fault plane. These simulations produced the largest ground motions in an area that includes downtown Seattle. This is mainly caused by rupture directed up dip toward downtown, radiation pattern of the source, and the turning of S waves by the velocity gradient in the Seattle basin. Another area of high ground motion is located about 13 km north of the fault and is caused by an increase in the amplitude of higher-mode Rayleigh waves caused by the thinning of the Quaternary deposits.

Bulletin of the Seismological Society of America↗

Paleoseismicity of two historically quiescent faults in Australia: Implications for fault behavior in stable continental regions

Paleoseismic studies of two historically aseismic Quaternary faults in Australia confirm that cratonic faults in stable continental regions (SCR) typically have a long-term behavior characterized by episodes of activity separated by quiescent intervals of at least 10,000 and commonly 100,000 years or more. Studies of the approximately 30-km-long Roopena fault in South Australia and the approximately 30-km-long Hyden fault in Western Australia document multiple Quaternary surface-faulting events that are unevenly spaced in time. The episodic clustering of events on cratonic SCR faults may be related to temporal fluctuations of fault-zone fluid pore pressures in a volume of strained crust. The long-term slip rate on cratonic SCR faults is extremely low, so the geomorphic expression of many cratonic SCR faults is subtle, and scarps may be difficult to detect because they are poorly preserved. Both the Roopena and Hyden faults are in areas of limited or no significant seismicity; these and other faults that we have studied indicate that many potentially hazardous SCR faults cannot be recognized solely on the basis of instrumental data or historical earthquakes. Although cratonic SCR faults may appear to be nonhazardous because they have been historically aseismic, those that are favorably oriented for movement in the current stress field can and have produced unexpected damaging earthquakes. Paleoseismic studies of modern and prehistoric SCR faulting events provide the basis for understanding of the long-term behavior of these faults and ultimately contribute to better seismic-hazard assessments.

South Australia↗

Spatial and temporal deformation along the northern San Jacinto fault, southern California: Implications for slip rates

The San Timoteo badlands is an area of uplift and erosional dissection that has formed as a result of late Quaternary uplift along a restraining bend in the San Jacinto fault, of the San Andreas fault system in southern California. This bend currently is located in a region where late Quaternary deposits and associated surfaces have formed in lower San Timoteo Canyon. We have used morphometric analysis of these surfaces, in conjunction with computer modeling of deformational patterns along the San Jacinto fault, to reconstruct spatial and temporal variations in uplift along the bend. Morphometric techniques used include envelope/subenvelope mapping, a gradient-length index along channels, and denudation values. Age control is determined using a combination of thermoluminescence (TL) and near infrared optical simulation luminescence dating (IROSL) and correlation of soil-development indices. These approaches are combined with an elastic half-space model used to determine the deformation associated with the fault bend. The region of modeled uplift has a similar distribution as that determined by morphometric techniques. Luminescence dates and soil-correlation age estimates generally agree. Based on soil development, surfaces within the study area were stabilized at approximately 300-700 ka for Q3, 43-67 ka for Q2, and 27.5-67 ka for Q1. Luminescence ages (both TL and IROSL) for the formation of the younger two surfaces are 58 to 94 ka for Q2 and 37 to 62 ka for Q1 (ages reported to 1?? uncertainty). Periods of uplift were determined for the surfaces in the study area, resulting in approximate uplift rates of 0.34 to 0.84 m/ka for the past 100 ka and 0.13 to 1.00 m/ka for the past 66 ka. Comparison of these rates of uplift to those generated by the model support a higher rate of lateral slip along the San Jacinto fault than commonly assumed (greater than 20 mm/yr, as compared to 8-12 mm/yr commonly cited). This higher slip rate supports the proposal that a greater amount of slip has transferred from the San Andreas fault to the San Jacinto fault than generally held. The San Jacinto fault may have accommodated a significant portion of the plate boundary slip during the past 100 ka.

California↗

Interpretation of the Seattle Uplift, Washington, as a passive-roof duplex

We interpret seismic lines and a wide variety of other geological and geophysical data to suggest that the Seattle uplift is a passive-roof duplex. A passive-roof duplex is bounded top and bottom by thrust faults with opposite senses of vergence that form a triangle zone at the leading edge of the advancing thrust sheet. In passive-roof duplexes the roof thrust slips only when the floor thrust ruptures. The Seattle fault is a south-dipping reverse fault forming the leading edge of the Seattle uplift, a 40-km-wide fold-and-thrust belt. The recently discovered, north-dipping Tacoma reverse fault is interpreted as a back thrust on the trailing edge of the belt, making the belt doubly vergent. Floor thrusts in the Seattle and Tacoma fault zones, imaged as discontinuous reflections, are interpreted as blind faults that flatten updip into bedding plane thrusts. Shallow monoclines in both the Seattle and Tacoma basins are interpreted to overlie the leading edges of thrust-bounded wedge tips advancing into the basins. Across the Seattle uplift, seismic lines image several shallow, short-wavelength folds exhibiting Quaternary or late Quaternary growth. From reflector truncation, several north-dipping thrust faults (splay thrusts) are inferred to core these shallow folds and to splay upward from a shallow roof thrust. Some of these shallow splay thrusts ruptured to the surface in the late Holocene. Ages from offset soils in trenches across the fault scarps and from abruptly raised shorelines indicate that the splay, roof, and floor thrusts of the Seattle and Tacoma faults ruptured about 1100 years ago.

Washington↗

Paleoseismic targets, seismic hazard, and urban areas in the Central and Eastern United States

Published geologic information from the central and eastern United States identifies 83 faults, groups of sand blows, named seismic zones, and other geological features as known or suspected products of Quaternary tectonic faulting. About one fifth of the features are known to contain faulted Quaternary materials or seismically induced liquefaction phenomena, but the origin and associated seismic hazard of most of the other features remain uncertain. Most of the features are in or near large urban areas. The largest cluster of features is in the Boston-Washington urban corridor (2005 estimated population: 50 million). The proximity of most features to populous areas identifies paleoseismic targets with potential to impact urban-hazard estimates.

Bulletin of the Seismological Society of America↗

Seismic imaging beneath an InSAR anomaly in eastern Washington State: Shallow faulting associated with an earthquake swarm in a low-hazard area

In 2001, a rare swarm of small, shallow earthquakes beneath the city of Spokane, Washington, caused ground shaking as well as audible booms over a five‐month period. Subsequent Interferometric Synthetic Aperture Radar (InSAR) data analysis revealed an area of surface uplift in the vicinity of the earthquake swarm. To investigate the potential faults that may have caused both the earthquakes and the topographic uplift, we collected ∼3 km of high‐resolution seismic‐reflection profiles to image the upper‐source region of the swarm. The two profiles reveal a complex deformational pattern within Quaternary alluvial, fluvial, and flood deposits, underlain by Tertiary basalts and basin sediments. At least 100 m of arching on a basalt surface in the upper 500 m is interpreted from both the seismic profiles and magnetic modeling. Two west‐dipping faults deform Quaternary sediments and project to the surface near the location of the Spokane fault defined from modeling of the InSAR data.

Washington↗

The northwest trending north Boquerón Bay-Punta Montalva Fault Zone; A through going active fault system in southwestern Puerto Rico

The North Boquerón Bay–Punta Montalva fault zone has been mapped crossing the Lajas Valley in southwest Puerto Rico. Identification of the fault was based upon detailed analysis of geophysical data, satellite images, and field mapping. The fault zone consists of a series of Cretaceous bedrock faults that reactivated and deformed Miocene limestone and Quaternary alluvial fan sediments. The fault zone is seismically active (local magnitude greater than 5.0) with numerous locally felt earthquakes. Focal mechanism solutions suggest strain partitioning with predominantly east–west left-lateral displacements with small normal faults striking mostly toward the northeast. Northeast-trending fractures and normal faults can be found in intermittent streams that cut through the Quaternary alluvial fan deposits along the southern margin of the Lajas Valley, an east–west-trending 30-km-long fault-controlled depression. Areas of preferred erosion within the alluvial fan trend toward the west-northwest parallel to the onland projection of the North Boquerón Bay fault. The North Boquerón Bay fault aligns with the Punta Montalva fault southeast of the Lajas Valley. Both faults show strong southward tilting of Miocene strata. On the western end, the Northern Boquerón Bay fault is covered with flat-lying Holocene sediments, whereas at the southern end the Punta Montalva fault shows left-lateral displacement of stream drainage on the order of a few hundred meters.

Puerto Rico↗

Revised earthquake geology inputs for the central and eastern United States and southeast Canada for the 2023 National Seismic Hazard Model

It has been nearly a decade since updates to seismic and fault sources in the central and eastern United States (CEUS) were last assessed for the 2012 Central and Eastern United States Seismic Source Characterization for nuclear facilities (CEUS-SSCn) and 2014 United States Geological Survey National Seismic Hazard Model (NSHM) for the conterminous U.S. In advance of the 2023 NSHM update, we created 3 related geospatial databases to summarize and characterize new fault source information for the CEUS. These include fault section, fault-zone polygon, and earthquake geology (fault slip rate, earthquake recurrence intervals) databases which document updates to fault parameters used in prior seismic hazard models in this region. The 2012 CEUS-SSCn and 2014 NSHM fault models served as a foundation, as we revised and added fault sources where new published studies documented significant changes to our understanding of fault location, geometry, or activity. We added 9 new fault sections that meet the criteria of (1) a length ≥7 km, (2) evidence of recurrent Quaternary tectonic activity, and (3) documentation that is publicly available in a peer-reviewed source. The prior CEUS models only included 6 fault sections (sources) and 10 fault-zone polygons (previously called repeating large magnitude earthquake (RLME) polygons). The revised databases include 15 fault sections and 10 fault zone polygons. Updates to the faults constitute a 150% increase in fault sections, but no change in the number of fault-zone polygons, although some fault-zone polygons differ from RLME polygons used in prior models. No faults were removed from past models. Several seismic zones and suspected faults were evaluated but not included in this update due to a lack of information about fault location, geometry, or recurrent Quaternary activity. These updates to the fault sections, fault-zone polygons, and earthquake geology databases will inform fault geometry and activity rates of CEUS sources during the 2023 NSHM implementation.

Seismological Research Letters↗

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

Neotectonic origins for the Meadow Bank scarp, Wabash Valley seismic zone USA

The Meadow Bank scarp (MBS) in southeastern Illinois is a linear geomorphic expression, ∼10 km long and ∼8 m high above a relatively flat landscape. It parallels an underlying northeast‐oriented Late‐Precambrian–Early‐Cambrian structural fabric, called the Wabash Valley fault zone, and is within an area of modern, historic, and paleo seismicity, called the Wabash Valley seismic zone. In addition, the MBS acts as a boundary of the Wabash River floodplain, as well as Pleistocene glacial outwash channels, which show evidence of frequent outburst flood events. To better understand the MBS’s equivocal origin in this complex geologic environment, we acquired a 917‐m‐long seismic‐reflection survey across its axis to assess the subsurface geologic configuration. The resultant image indicates a complex set of faults that antiformally fold and displace the top of Paleozoic bedrock by ∼12 m across the survey. Moreover, fault and/or fold deformation extends into the shallowest imaged Quaternary strata at ∼6 m below the ground surface. This suggests the MBS origin is related to underlying Quaternary reactivated, positively inverted faults rather than exclusively to glacial outburst flood erosion. These results provide rare paleoearthquake spatial constraints for central U.S. regional seismic hazard consideration.

Illinois↗

Faulting along the southern margin of Reelfoot Lake, Tennessee

Approximately 320 km of deep seismic-reflection profiles in northwestern Tennessee reveal the structure of a major portion of the southeastern margin of the Reelfoot Rift. This rift margin consists of at least two major down-to-the-west late Precambrian to Cambrian normal faults. Maximum fault displacement at one location is 3 km. These two faults strike N50°E, in their northern portions; over their southern extent they trend N30°E however. Numerous faults in these reflection lines displace Paleozoic, Cretaceous, and Tertiary reflectors. The dominantly reverse faulting, folding, and positive flower structures in the shallower section indicate Eocene or younger transpression. We believe the late Tertiary faulting is due to reactivation of the basement faults, because on some of the reflection lines basement normal faults can be traced into Tertiary reverse faults, the Tertiary faults parallel the basement faults, and the Tertiary faults overlie or are adjacent to the basement faults. Numerous faults displace the highest (youngest) reflectors and therefore we do not know how recently faulting has occurred. Previous studies have identified Quaternary faulting within the southeastern Reelfoot Rift margin of western Tennessee, however. Thus, we believe all of the late Tertiary faults identified in this research should be evaluated for possible Quaternary movement.

Tennessee↗

Geology and ground-water resources of Puerto Rico

Puerto Rico, the easternmost and smallest of the Greater Antilles, has an axis of deformed and metamorphosed volcanic rocks of Upper Cretaceous age, intruded by dioritic rocks during the Antillean revolution. The hard-rock core is flanked on the north and south by limestones and clastic rocks of late Oligocene and early Miocene age, which have been gently arched and uplifted. Similar rocks were deposited in late Miocene or early Pliocene time along the west coast. During the Quaternary the island has been separated from the other major Antillean islands by faulting and has been arched, uplifted, and tilted to the northeast. Alluvium and littoral deposits have partially filled the valleys and have formed coastal plains on the north and south. The Upper Cretaceous volcanic and associated rocks yield small supplies of water to wells in most places. The Tertiary limestones yield large supplies in some places on the north, south, and west coasts. The Quaternary sands and gravels are the most important aquifers. They yield about 200 million gallons a day to wells in the main south coastal plain alone. The water is used largely for irrigation. A total of perhaps 250 to 300 million gallons a day is pumped from wells in the island, and moderate to large additional supplies are available in some places.

Puerto Rico↗

The plumbotectonics of the West Shasta mining district, eastern Klamath Mountains, California

The tectonic setting comprising the West Shasta mining district has often been compared with that of primitive island arcs. Concentrations of uranium, thorium, and lead and lead isotope compositions were determined for Devonian ores and rocks of the West Shasta district, eastern Klamath Mountains, California, to help evaluate the tectonic classification. The lead isotope pattern is found to be complex. From comparison of the data with those on younger ores and rocks in the region and with those isotopic patterns found in modern tectonic terranes, however, a number of conclusions are possible. A lead isotope point for the Devonian oceanic mantle is now well established from this study on the West Shasta district. This isotopic composition is in agreement with that suggested by Slawson in 1983--i.e., from a sample of massive sulfide ore from the Golinsky deposit--with a 206 Pb/ 204 Pb of 17.830, a 207 Pb/ 204 Pb of 15.450, and a 208 Pb/ 204 Pb of 37.313. If the Devonian mantle is analogous to the modern mantle, the determined value is probably at the more radiogenic end of the Devonian oceanic mantle array.Some samples of volcanic rocks and ores that have elevated values of 207 Pb/ 204 Pb and 208 Pb/ 204 Pb indicate that subducted pelagic sediments or interaction of the magmas with other sediments downsection have been involved to varying degrees in the generation of magmas. The high ratios were not attained by addition of lead to the volcanic rocks or ores during subsequent magmatic events, such as intrusion of the Permian Pit River stock to the east or of the Cretaceous Shasta Bally batholith that crops out to the south and west and may underlie part of the district. Some values of 207 Pb/ 204 Pb are sufficiently high as to suggest that West Shasta may have developed nearer a continent than was previously supposed. Lead isotope data for Quaternary volcanic rocks are somewhat more radiogenic than for Cretaceous ores and plutonic rocks. Permo-Triassic ores are again a bit less radiogenic. The isotopic differences between the Permo-Triassic and Quaternary data could be accounted for by a value for 238 U/ 204 Pb of 10.42 in common source material. Using this value of 238 U/ 204 Pb to calculate even further back to 400 m.y., the resulting ratios are found to fall very close to the "best value" for the lead isotope mixing line between the Devonian mantle and pelagic sediments. We interpret this intersection to be the "mean value" for the assimilated Devonian sediment lead--18.250 for 206 Pb/ 204 Pb and 15.582 for 207 Pb/ 204 Pb. As deduced for the lead isotope composition for the Devonian mantle at this location, the pelagic sediment, lead isotope composition also is toward the more radiogenic end of the values expected for pelagic sediments in the Devonian. Lack of sediments in the observed volcanic section of the West Shasta district suggests a submerged volcanic-arc setting (as interpreted by others for the Troodos and Samail ophiolites) rather than an island-arc situation (such as the Green Tuff area of Japan) or an incipient spreading ridge setting (that might have grown to be a subaerial Iceland). The elevated values of 207 Pb/ 204 Pb for some samples suggest a submerged volcanic are whereas the exceedingly low values of thorium--which is not easily mobilized during alteration events--for both basaltic andesites and plagiorhyolites is suggestive of depleted source material such as is found for most oceanic spreading centers. Elevated values of 207 Pb/ 204 Pb are exceedingly rare in midocean ridge basalts and low contents of thorium are known in island arcs, so a submerged volcanic arc is the preferred interpretation. Some similarity exists between the 206 Pb/ 204 Pb values of Devonian ores having elevated values of 207 Pb/ 204 Pb and those of the Permo-Triassic ores of the East Shasta district, as mentioned by Slawson in 1983. This similarity is now confirmed to be a coincidence. We find it due first of all to some incorporation of sediment lead in the magmas, followed later by some migration of radiogenic lead--probably locally derived--into the ores during subsequent events. Because there was some postdepositional lead migration into the ores, some migration of copper also into the ores cannot be excluded. Lead, especially radiogenic lead, however, is more mobile than copper. As the migrating lead is deduced to have been locally derived from the observed section rather than exotically derived, any copper added was probably locally derived also.

Economic Geology↗

The Geysers-Clear Lake area, California: Thermal waters, mineralization, volcanism, and geothermal potential

Manifestations of a major thermal anomaly in the Geysers-Clear Lake area of northern California include the late Pliocene to Holocene Clear Lake Volcanics, The Geysers geothermal field, abundant thermal springs, and epithermal mercury and gold mineralization. The epithermal mineralization and thermal springs typically occur along high-angle faults within the broad San Andreas transform fault system that forms the western boundary of the North American plate in this area. The young volcanic rocks overlie Mesozoic marine rocks of the Great Valley sequence which have been thrust above the coeval Franciscan Complex and penecontemporaneously dropped back down along low-angle detachment faults.Many of the waters of the region are nonmeteoric as defined by their isotopic signature. One type of isotopically shifted water emerges from or near Great Valley sequence rocks and is the most chloride rich. It is interpreted to be evolved connate in origin. A second type, evolved meteoric water, has moderate chloride contents, high boron contents, and high B/Cl ratios and is found locally in Franciscan rocks, notably at the Sulphur Bank mercury mine, where it probably results from near-closed-system, repeated boiling of meteoric water in host rocks that also contribute organic components to the water. At the Sulphur Bank mine fracturing of otherwise impermeable Franciscan rocks by faulting has created a localized zone of permeability in which thermal water boils repeatedly with limited venting to the surface. Boron-rich fluids were apparently present at depth in The Geysers geothermal field when intrusion of silicic magma occurred, because the concealed intrusion of felsite is surrounded by a halo of tourmaline-bearing hornfels. The volume of this poorly dated early to middle Quaternary intrusive body probably exceeds the 100 km 3 of erupted Clear Lake Volcanics. Similar intrusions may have occurred in the eastern part of the area at Wilbur Springs and the McLaughlin mine, where gold deposition and evidence of hydrothermal phenomena suggest more magmatic activity than is indicated by the small exposed bodies of early Quaternary basaltic lava. The Clear Lake Volcanics are the present locus of volcanism in the northern Coast Ranges and progressively older volcanic centers occur to the south. Geophysical data suggest that a large silicic magma body may be centered north of The Geysers steam field, providing the heat for the geothermal field.Geothermal power production has peaked at The Geysers and pressure declines indicate significant depletion of the fluid resource. The vapor-dominated field evolved from a preexisting hydrothermal system within fractured, otherwise impermeable Franciscan metamorphic rocks. A deep water table of saline fluid has been postulated to be present under the steam field, but no chloride-rich water has been found at drillable depth. We propose that recently discovered, isotopically shifted steam in the northwest Geysers area indicates the presence not of deep connate water but xather of boiled-down, boron-rich Franciscan evolved meteoric water. This water is likely to be present in limited quantities and will not provide a significant hot water resource for geothermal power production at The Geysers field or from the main Clear Lake volcanic field.

Economic Geology↗

Discovering blind geothermal systems in the Great Basin Region: An integrated geologic and geophysical approach for establishing geothermal play fairways: All phases

Most geothermal resources in the Great Basin region of the western USA are blind, and thus the discovery of new commercial-grade systems requires synthesis of favorable characteristics for geothermal activity. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity to identify promising areas for new development. This project integrated multiple datasets to apply the play fairway concept and assess geothermal potential in a large region of the Great Basin in Nevada. It is therefore referred to as the Nevada play fairway project. This project was a strong collaborative effort between several organizations, led by the Nevada Bureau of Mines and Geology at the University of Nevada, Reno, but with key support from the U.S. Geological Survey, ATLAS Geosciences, Inc,, Hi-Q Geophysical, Inc., Lawrence Berkeley National Laboratory, Utah Geological Survey, and Innovative Geothermal Ltd. In Budget Period 1 of this project, available data for nine geologic, geochemical, and geophysical parameters were initially synthesized to produce a new detailed geothermal potential map of 96,000 km2 from west-central to eastern Nevada (Figure 1). These parameters were grouped into subsets and individually weighted (Figure 2) to delineate rankings for local permeability, intermediate permeability, regional permeability, and thermal potential, which collectively defined geothermal play fairways (i.e., most likely locations for significant geothermal fluid flow). This initial work was aimed at reducing the risks in regional exploration and therefore facilitating discovery of new commercial-grade systems in blind settings, as well as in areas with surface expressions of geothermal activity. Budget Period 2 of the project involved detailed analysis of some of the most promising areas identified in Phase 1. Twenty-four highly prospective areas, including both known undeveloped systems and previously undiscovered potential blind systems, were identified for further analysis (Figures 3 and 4). After reconnaissance of these areas, five of the most promising sites were selected for detailed studies. Multiple techniques were employed in the detailed studies, including geologic mapping, shallow temperature surveys, gravity surveys, Lidar, geochemical studies, seismic reflection analysis, and 3D modeling. The goal of the detailed studies was to identify specific areas with the highest likelihood for high permeability and thermal fluids, such that drill sites could be targeted. Three main sets of predictive maps were generated for each detailed study area: 1) play fairway maps, 2) play fairway error maps, and 3) direct evidence maps. Local- and intermediate-scale permeability models were revised to reflect results of the detailed geologic, geophysical, and geochemical analyses. Budget Period 3 of the project involved more detailed geophysical analyses and temperature-gradient (TG) drilling in southeastern Gabbs Valley and northern Granite Springs Valley (Figure 4), deemed the two most promising sites, with the goal of providing preliminary validation of the play fairway methodology. In southeastern Gabbs Valley, the collocation of a favorable structural setting (displacement transfer zone and fault intersections), Quaternary faults, intersecting and terminating gravity gradients, magnetic low, shallow (2 m) temperature anomaly, low resistivity anomaly, and promising geothermometry from nearby water wells provided evidence for a blind system. Drilling of six TG holes defines an apparent geothermal system at this locality with temperatures as high as 124°C at 152 m. This system is blind, with no surface hot springs, fumaroles, or paleo-geothermal deposits. For northern Granite Springs Valley, a favorable structural setting (termination of a major Quaternary normal fault), terminating gravity gradient, magnetic gradient, newly discovered sinter deposits, nearby warm water wells, previously drilled TG holes in the vicinity, and promising geothermometry suggest a hidden system. Drilling of six new TG holes yields temperatures of ~96°C at ~250 m, suggesting the presence of a geothermal system. Major lessons learned in the course of this project include: 1) initially identified sites commonly include multiple favorable structural settings at a finer scale; 2) promising sites in Cenozoic basins cannot be recognized without detailed geophysical surveys; and 3) play fairway analysis should be refined as the exploration program vectors into the most promising sites and finer-scale data are acquired. In addition to producing copious amounts of data, this project resulted in 16 published papers, 10 abstracts, more than 40 presentations across the U.S. and abroad (including several keynote addresses), 2 Masters theses, and 7 media reports.

Nevada↗

The geological approach to dating archaeological sites

Abasic Question that must be answered for any archaeological site is, how old is it? Although some archaeological sites can be dated on the basis of archaeological correlations alone and although dendrochronological (Giddings, 1952, pp. 105-110) and radiocarbon methods give absolute ages for other sites , many sites can be dated only by methods based on the geologists' knowledge of geographic and climatic changes during the last few tens of thousands of years. The dates of these changes are established in part by radiocarbon and related methods. Study of archaeological sites accurately dated by radiocarbon methods will amplify the geologists' understanding of late Quaternary events. The well known techniques of dendrochronological and radiocarbon dating need no discussion. The interrelations of methods that depend ultimately on our knowledge of Quaternary climatic and geographic changes are not always well understood, however, by archaeologists. The present paper is intended to clarify some of these interrelations.

American Antiquity↗

Neotectonic mapping of Puerto Rico

Puerto Rico is part of the Puerto Rico-Virgin Islands microplate, along the Caribbean–North American plate boundary between the Puerto Rico trench subduction zone and the Muertos Trough incipient subduction zone. Despite recent seismicity and geodetically constrained deformation of ~3 mm/yr of left-lateral shear across the island, Quaternary fault locations remain largely uncertain. Preservation of recent faulting in the landscape is masked by distributed faulting, high weathering rates of the tropical climate, steep topography, frequent landsliding, and extensive agriculture and urbanization along coastlines and river valleys. We present remote neotectonic mapping of historical aerial imagery from the 1930s-60s and <1-m lidar topography, integrated with field observations, to create an updated active fault map of Puerto Rico. We focus on faults that offset younger geomorphic surfaces, with ages estimated by geologic mapping, OSL and radiocarbon dating, and morphologic interpretations. We present new evidence for Quaternary activity on seven faults, including the South Lajas, Salinas, Punta Montalva, Great Southern Puerto Rico, Cerro Goden, Parguera, and San Marcos faults. We find that active faulting occurs preferentially along the southern and western coasts and does not always spatially coincide with preexisting bedrock faults, possibly reflecting partial reactivation of older faults in the modern strain field.

Puerto Rico↗

The geology of Hess Rise, central north Pacific Ocean

The geology of Hess Rise is interpreted from studies of morphology and structure, igneous petrology, sediment lithofacies, seismic stratigraphy, and paleoenvironments. Hess Rise probably formed at a triple junction, between 116 and 95 m.y. ago, in the equatorial zone of the southern hemisphere. A large archipelago, formed by volcanism, subsequently moved northward as part of the Pacific Plate and subsided. A Late Cretaceous-early Tertiary tectonic and(or) volcanic event created oceanic islands and probably influenced the normal subsidence rate. The lithofacies reflect both the northward movement under various surface water masses of differing productivity and the subsidence history, which influenced calcareous-sediment accumulation and dissolution. Hess Rise is informally divided into three physiographic or morphologic provinces: northern Hess Rise, the central platform, and southern Hess Rise. Southern Hess Rise is further subdivided into the northwestern ridge, Mellish Bank, and the eastern ridge. The structure of Hess Rise is dominated by normal faults which bound grabens and horsts. The west and south boundaries of the rise are fault scarps. Most faults trend about 345 ° on northern Hess Rise, 039° to 060° on southern Hess Rise. Igneous rocks are tholeiitic basalt on northern Hess Rise at Site 464, and trachyte at Site 465 on southern Hess Rise. The tholeiite probably is not a mid-ocean-ridge basalt; more likely it is a transitional basalt erupted during off-ridge volcanism. The trachyte at Site 465 was erupted either in shallow water or subaerially; it represents a late-stage differentiate of alkali-basalt magma. Geochemically, the trachyte is similar to late-stage eruptives on many oceanic islands. The alkali basalt clasts in Upper Cretaceous calcareous ooze at Site 466 probably record a Late Cretaceous-early Tertiary tectonic event that brought old crust above sea level, where it was eroded; alternatively, volcanism may have built the islands. Cores recovered from Holes 464, 310, 310A, 465,465A, and 466 (north to south) show three major lithofacies: limestone of mid-Cretaceous (Albian-Cenomanian) age, calcareous ooze and chalk of Late Cretaceous to Quaternary age, and pelagic clay that is Late Cretaceous to Quaternary in age at Site 464 and Eocene in age at Site 310. Minor lithofacies in the carbonates and pelagic clay include siliceous microfossils and chert. The limestone contains as much as 8.6% by weight of organic carbon. The organic-carbon-rich sediments apparently were deposited along the sides of Hess Rise, above the CCD and within a mid-water oxygen minimum, as the rise crossed the highly productive equatorial divergence. Surface sediments are influenced by present-day near-surface water-mass productivity and the depth of deposition. Above about 3000 meters calcareous ooze is deposited, and below about 4000 meters pelagic clay is dominant. Between 3000 meters and 4000 meters, greater clay contents correlate with increased water depth. The seismic stratigraphy interpreted from single-channel seismic-reflection records can be correlated with the lithofacies. Three major acoustic units apparently vary in age, composition, thickness, and geographic distribution. The lowest acoustic unit generally is acoustically opaque; it corresponds to volcanic basement. In places, however, the top parts of this unit may be well-lithified limestone or chert. The middle acoustic unit, in general strongly layered acoustically, is Albian and Cenomanian limestone, chalk, and chert on southern Hess Rise and Albian and Cenomanian chert, chalk, limestone, and clay stone on northern Hess Rise. The middle unit probably is Albian to at least lower Tertiary chalk, chert, and nannofossil ooze on the central platform. The upper acoustic unit is weakly stratified to acoustically transparent and corresponds to Upper Cretaceous to Recent nannofossil ooze on southern Hess Rise and to pelagic clay of the same age on northern Hess Rise. On the central platform, it probably corresponds to Eocene to Recent nannofossil ooze, marl, and pelagic clay

Initial Reports of the D.S.D.P.↗