Search USGS⌕ Search

SEARCH · Search USGS

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS1998

Quantitative controls on location and architecture of carbonate depositional sequences: upper miocene, cabo de gata region, se Spain

Sequence stratigraphy, pinning-point relative sea-level curves, and magnetostratigraphy provide the quantitative data necessary to understand how rates of sea-level change and different substrate paleoslopes are dominant controls on accumulation rate, carbonate depositional sequence location, and internal architecture. Five third-order (1-10 my) and fourth-order (0.1-1.0 my) upper Miocene carbonate depositional sequences (DS1A, DS1B, DS2, DS3, TCC) formed with superimposed higher-frequency sea-level cycles in an archipelago setting in SE Spain. Overall, our study indicates when areas of high substrate slope (>15 degrees ) are in shallow water, independent of climate, the location and internal architecture of carbonate deposits are not directly linked to sea-level position but, instead, are controlled by location of gently sloping substrates and processes of bypass. In contrast, if carbonate sediments are generated where substrates of low slope (<15 degrees in our area) are in shallow water, then architecture and location of deposits may be more directly controlled by the relative position of sea level. For these systems, the rates of relative sea-level change are important for determining which systems tracts develop. DS1A-DS1B, cooler-water ramps, result from sediment bypass across steep paleoslopes to toes of slopes. Accumulation rates decreased from >15.6 cm/ky to approximately 2 cm/ky and overall relative sea level rose at rates of 17-21.4 cm/ky. Higher frequency sea-level rates were about 111 to more than 260 cm/ky, producing onlapping, fining- (deepening-) upward cycles. Decreasing accumulation rates resulted from decreasing surface area for shallow-water sediment production, drowning of shallow-water substrates, and complex sediment dispersal related to the archipelago setting. Typical systems tract and parasequence development should not be expected in "bypass ramp" settings; facies of onlapping strata do not track base level and are likely to be significantly different compared to onlapping strata associated with coastal onlap. Basal and upper DS2 reef megabreccias (indicating the transition from cool to warmer climatic conditions) were eroded from steep upslope positions and redeposited downslope onto areas of gentle substrate during rapid sea-level falls (>22.7 cm/ky) of short duration. Such rapid sea-level falls and presence of steep slopes are not conducive to formation of forced regressive systems tracts composed of down-stepping reef clinoforms. The DS3 reefal platform formed where shallow water coincided with gently sloping substrates created by earlier deposition. Slow progradation (0.39-1.45 km/my) is best explained by the lack of an extensive bank top, progressively falling sea level, and low productivity resulting from siliciclastic debris and excess nutrients shed from nearby volcanic islands. Although DS3 strata were deposited during a third-order relative sea-level cycle, a typical transgressive systems tract is not recognizable, indicating that the initial relative rise in sea level was too rapid (>>19 cm/ky). Downstepping reefs, forming a forced regressive systems tract, were deposited during the relative sea-level fall at the end of DS3, indicating that relatively slow rates of fall (10 cm/ky or less) over favorable paleoslope conditions are conducive to generation of forced regressive systems tracts consisting of downstepping reef clinoforms. The TCC sequence consists of four shallow-water sedimentary cycles that were deposited during a 400 ky to 100 ky time span. Such shallow-water cycles, typical of many platforms, form only where shallow water intersects gently sloping substrates. The relative thicknesses of cycles (<2 m to 15 m thick), magnitudes of relative sea-level fluctuations associated with each cycle (25-30 m), high rates of relative sea-level fluctuations (minimum of 25-120 cm/ky), and the widespread distribution of similar TCC cycles in the Mediterranean and elsewhere are supportive of a glacio-eustatic influence. With rates of sea-level change so high, typical systems tracts do not form.

Journal of Sedimentary Research↗
USGS1999

Chronologic model and transgressive-regressive signatures in the late neocene siliciclastic foundation (long key formation) of the Florida keys

Recent drilling of continuous cores in southernmost Florida has documented a thick unit of upper Neogene siliciclastics subjacent to surficial shallow-water Quaternary carbonates exposed on islands of the Florida Keys. The siliciclastics comprise the Long Key Formation and were identified in two cores collected from the middle and upper Florida Keys. A chronologic model based on new planktic foraminiferal biochronology and strontium-isotope chronology suggests the timing of siliciclastic deposition and provides a basis for regional correlation. The chronologic model, supplemented by vertical trends in quartz grain size, pattern of planktic menardiiform coiling direction, and paleoenvironmental interpretations of benthic foraminiferal assemblages, shows that the Long Key Formation contains three intervals (I-III) of varying thickness, grain-size composition, and paleowater depth. Interval I is uppermost Miocene. The quartz grains in Interval I fine upward from basal very coarse sand to fine and very fine sand. Benthic foraminifera indicate an upward shift from an outer-shelf to inner-shelf depositional environment. Interval II, deposited during the late early to early late Pliocene, contains reworked upper Miocene siliciclastics and faunas. In the upper Keys, quartz grains in Interval II range from very coarse sand that fines upward to very fine sand and then coarsens to very coarse and medium sand. In situ benthic faunas indicate an upward shift from outer-shelf to inner-shelf deposition. In the middle Keys, Interval II is different, with the quartz grains ranging primarily from medium to very fine sand. In situ benthic taxa indicate deposition on an inner shelf. In both the middle and upper Keys, the upper Pliocene siliciclastics of Interval III contain quartz grains ranging from very coarse to very fine sands that were deposited on an inner shelf. A sequence boundary between Interval I and Interval II is suggested by; an abrupt shift in the strontium-isotope chemostratigraphy; coarsening in quartz grain size above the boundary; an abrupt landward shift in depositional facies in the upper Keys core; and a distinct variation in the predominant coiling direction of the menardiiform planktic foraminifera, from fluctuating dextral-sinistral to dextral in the upper Keys core. Successive siliciclastic infilling, likely associated with eustatic sea-level change and current redeposition, formed a foundation for subsequent carbonate deposition. Deep-sea biostratigraphic techniques, integrated with ages derived from strontium-isotope chemostratigraphy, can be successfully applied to coastal-margin sequences, even though a depauperate suite of faunal markers is common.

Journal of Sedimentary Research↗
USGS2005

Mississippian carbonate buildups and development of cool-waterlike carbonate platforms in the Illinois Basin, Midcontinent U.S.A.

Numerous biohermal buildups occur in Mississippian (Lower Carboniferous) strata in the Illinois Basin and adjacent regions. They developed as mud mounds, biodetrital calcisiltite mounds, and bryozoan frame thickets (fenestrate-frame coquina or rudstone) during the Kinderhookian and early Meramecian (Tournaisian and early Visean), and as microbial mud mounds, microbial- serpulidbryozoanboundstones, and solenoporoid (red algal) boundstones during the Chesterian (late Visean and Serpukhovian). True Waulsortian mounds did not develop in the Illinois Basin, but echinoderm (primarily crinoids)-bryozoan carbonate banks and bryozoan frame thickets generally occupied the same niche during the Kinderhookian-early Meramecian. Nutrient availability and the resulting increase in the productivity of echinoderms and bryozoans were apparently detrimental to Waulsortian mound development. Deposition of crinoidal-bryozoan carbonates during the Kinderhookian-Osagean initially occurred on a ramp setting that later evolved into a platform with a relatively steep margin through sediment aggradation and progradation. By mid-Osagean-early Meramecian, two such platforms, namely the Burlington Shelf and the Ullin Platform, developed adjacent to a deep, initially starved basin. Sedimentologic and petrographic characteristics of the Kinderhookian-earliest Meramecian carbonates resemble the modern cool-water Heterozoan Association. This is in contrast with post-earliest Meramecian carbonates, which are typically oolitic and peloidal with common peri tidal facies. The post-earliest Meramecian carbonates, therefore, resemble those of the warm-water Photozoan Association. The prevalence of Heterozoan carbonates in the Illinois Basin correlates with a rapid increase in the rate of subsidence and a major second-order eustatic sea-level rise that resulted in deep-water starved basins at this time. In the starved Illinois Basin, deposition was initially limited to a thin phosphatic shale that was followed later by deposition of up to 200 m of siliceous, spiculitic, and radiolarianbearing limestone. The starved basin was connected to the deep open ocean through a bathymetric depression, which was centered over the failed late Precambrian-Early Cambrian Reelfoot Rift, which extended from the deep-water Ouachita Trough in central Arkansas to southern Illinois, approximately parallel to the trend of the modern Mississippi River. We believe that upwelling of cool, nutrient- and silica-rich deep oceanic water, which entered the basin through this bathymetric depression, resulted in proliferation of pelmatozoans and bryozoans. The subsequent change from cool-water-like carbonates to warm-water-like carbonates appears to be related to decreased subsidence and gradual shallowing of the basin.

Illinois↗
USGS2021

Identifying elusive piercing points along the North American transform margin using mixture modeling of detrital zircon data from sedimentary units and their crystalline sources

The San Gabriel and Canton faults represent early stages in the development of the San Andreas fault system. However, questions of timing of initiation and magnitude of slip on these structures remain unresolved, with published estimates ranging from 42-75 km and likely starting in the Miocene. This uncertainty in slip history reflects an absence of appropriate piercing points. We attempt to better constrain the slip history on these faults by quantifying the changing proportions of source terranes contributing sediment to the Ventura Basin, California, through the Cenozoic, including refining data for a key piercing point. Ventura Basin sediments show an increase in detrital zircon U-Pb dates and mineral abundances associated with crystalline sources in the northern San Gabriel Mountains through time, which we interpret to record the basin’s northwest translation by dextral strike-slip faulting. In particular, an Oligocene unit mapped as part of the extra-regional Sespe Formation instead has greater affinity to the Vasquez Formation. Specifically, the presence of a unimodal population of ~1180 Ma zircon, high (57%) plagioclase content, and proximal alluvial fan facies indicate that the basin was adjacent to the San Gabriel anorthosite during deposition of the Vasquez Formation, requiring 35-60 km of slip on the San Gabriel-Canton fault system. Mixture modeling of detrital zircon data supported by automated mineralogy highlights the importance of this piercing point along the San Gabriel-Canton fault system and suggests that fault slip began during the late Oligocene to early Miocene, which is earlier than published models. These two lines of evidence disagree with recent models that estimate >60 km of offset, requiring a reappraisal of the slip history of an early strand of the San Andreas transform zone.

California↗
USGS2024

Paleogene sedimentary basin development in southern Nevada, USA

The cause of the transition from Mesozoic and early Cenozoic crustal shortening to later extension in the western United States is debated. In many parts of the extant Sevier hinterland, now the Basin and Range Province, the sedimentary sections that provide the most direct record of that transition remain poorly studied and lack meaningful age control. In this paper, we present field characterization supported by U-Pb detrital zircon and 40 Ar/ 39 Ar feldspar ages for ten sections across southern Nevada. We describe a newly identified basin, here named the Fallout Hills basin, which preserves >1.0 km of sedimentary deposits as old as middle Eocene, ca. 48 Ma. Deposition occurred during the 20 m.y. (million years) before the 27.60 ± 0.03 Ma Monotony Tuff blanketed much of south-central Nevada, based on 47.6 Ma and younger detrital zircon maximum depositional ages (MDAs) from near the Pintwater and Spotted Ranges. Elsewhere in southern Nevada, prevolcanic Cenozoic strata commonly form thinner (~100 m), isolated exposures that yield detrital zircon MDAs ≤10 m.y. older than (and in some cases essentially the same age as) the ca. 27–28 Ma ignimbrites that cap the sections. A variable but overall upward-fining facies pattern is observed in both the Fallout Hills basin and the thinner sections. These localized patterns imply topographic changes that are unlikely to reflect plate-scale processes and are not consistent with large-magnitude extension. Instead, variable uplift due to magmatism combined with antecedent topographic relief from thrust faulting and subsequent erosion likely provided accommodation for these deposits.

Nevada↗
USGS2012

Strata-bound Fe-Co-Cu-Au-Bi-Y-REE deposits of the Idaho Cobalt Belt: Multistage hydrothermal mineralization in a magmatic-related iron oxide copper-gold system

Mineralogical and geochemical studies of strata-bound Fe-Co-Cu-Au-Bi-Y-rare-earth element (REE) deposits of the Idaho cobalt belt in east-central Idaho provide evidence of multistage epigenetic mineralization by magmatic-hydrothermal processes in an iron oxide copper-gold (IOCG) system. Deposits of the Idaho cobalt belt comprise three types: (1) strata-bound sulfide lenses in the Blackbird district, which are cobaltite and, less commonly, chalcopyrite rich with locally abundant gold, native bismuth, bismuthinite, xenotime, allanite, monazite, and the Be-rich silicate gadolinite-(Y), with sparse uraninite, stannite, and Bi tellurides, in a gangue of quartz, chlorite, biotite, muscovite, garnet, tourmaline, chloritoid, and/or siderite, with locally abundant fluorapatite or magnetite; (2) discordant tourmalinized breccias in the Blackbird district that in places have concentrations of cobaltite, chalcopyrite, gold, and xenotime; and (3) strata-bound magnetite-rich lenses in the Iron Creek area, which contain cobaltiferous pyrite and locally sparse chalcopyrite or xenotime. Most sulfide-rich deposits in the Blackbird district are enclosed by strata-bound lenses composed mainly of Cl-rich Fe biotite; some deposits have quartz-rich envelopes. Whole-rock analyses of 48 Co- and/or Cu-rich samples show high concentrations of Au (up to 26.8 ppm), Bi (up to 9.16 wt %), Y (up to 0.83 wt %), ∑REEs (up to 2.56 wt %), Ni (up to 6,780 ppm), and Be (up to 1,180 ppm), with locally elevated U (up to 124 ppm) and Sn (up to 133 ppm); Zn and Pb contents are uniformly low (≤821 and ≤61 ppm, respectively). Varimax factor analysis of bulk compositions of these samples reveals geochemically distinct element groupings that reflect statistical associations of monazite, allanite, and xenotime; biotite and gold; detrital minerals; chalcopyrite and sparse stannite; quartz; and cobaltite with sparse selenides and tellurides. Significantly, Cu is statistically separate from Co and As, consistent with the general lack of abundant chalcopyrite in cobaltite-rich samples. Paragenetic relations determined by scanning electron microscopy indicate that the earliest Y-REE-Be mineralization preceded deposition of Co, Cu, Au, and Bi. Allanite, xenotime, and gadolinite-(Y) commonly occur as intergrowths with and inclusions in cobaltite; the opposite texture is rare. Monazite, in contrast, forms a poikiloblastic matrix to cobaltite and thin rims on allanite and xenotime, reflecting a later metamorphic paragenesis. Allanite and xenotime also show evidence of late dissolution and reprecipitation, forming discordant rims on older anhedral allanite and xenotime and separate euhedral crystals of each mineral. Textural data suggest extensive deformation of the deposits by folding and shearing, and by pervasive recrystallization, all during Cretaceous metamorphism. Sensitive high resolution ion microprobe U-Pb geochronology by Aleinikoff et al. (2012) supports these paragenetic interpretations, documenting contemporaneous Mesoproterozoic growth of early xenotime and crystallization of megacrystic A-type granite on the northern border of the district. These ages are used together with mineralogical and geochemical data from the present study to support an epigenetic, IOCG model for Fe-Co-Cu-Au-Bi-Y-REE deposits of the Idaho cobalt belt. A sulfide facies variant of IOCG deposits is proposed for the Blackbird district, in which reducing hydrothermal conditions favored deposition of sulfide minerals over iron oxides. This new model includes Mesoproterozoic vein mineralization and related Fe-Cl metasomatism that formed the biotite-rich lenses, a predominantly felsic magmatic source for metals in the deposits, given their local abundance of Y, REEs, and Be, and a major sedimentary component in the hydrothermal fluids based on independent sulfur isotope and boron isotope data for sulfides and ore-related tourmaline, respectively.

Economic Geology↗
USGS2012

Peralkaline- and calc-alkaline-hosted volcanogenic massive sulfide deposits of the Bonnifield District, East-Central Alaska

Volcanogenic massive sulfide (VMS) Zn-Pb-Cu-Ag-Au deposits of the Bonnifield mining district formed during Late Devonian-Early Mississippian magmatism along the western edge of Laurentia. The largest deposits, Dry Creek and WTF, have a combined resource of 5.7 million tonnes at 10% Zn, 4% Pb, 0.3% Cu, 300 grams per tonne (g/t) Ag, and 1.6 g/t Au. These polymetallic deposits are hosted in high field strength element (HFSE)- and rare-earth element (REE)-rich peralkaline (pantelleritic) metarhyolite, and interlayered pyritic argillite and mudstone of the Mystic Creek Member of the Totatlanika Schist Formation. Mystic Creek metarhyolite and alkali basalt (Chute Creek Member) constitute a bimodal pair that formed in an extensional environment. A synvolcanic peralkaline quartz porphyry containing veins of fluorite, sphalerite, pyrite, and quartz intrudes the central footwall at Dry Creek. The Anderson Mountain deposit, located ~32 km to the southwest, occurs within calc-alkaline felsic to intermediate-composition metavolcanic rocks and associated graphitic argillite of the Wood River assemblage. Felsic metavolcanic rocks there have only slightly elevated HFSEs and REEs. The association of abundant graphitic and siliceous argillite with the felsic volcanic rocks together with low Cu contents in the Bonnifield deposits suggests classification as a siliciclastic-felsic type of VMS deposit. Bonnifield massive sulfides and host rocks were metamorphosed and deformed under greenschist-facies conditions in the Mesozoic. Primary depositional textures, generally uncommon, consist of framboids, framboidal aggregates, and spongy masses of pyrite. Sphalerite, the predominant base metal sulfide, encloses early pyrite framboids. Galena and chalcopyrite accompanied early pyrite formation but primarily formed late in the paragenetic sequence. Silver-rich tetrahedrite is a minor late phase at the Dry Creek deposit. Gold and Ag are present in low to moderate amounts in pyrite from all of the deposits; electrum inclusions occur in Dry Creek sphalerite. Contents and ratios of trace elements in graphitic argillite that serve as proxies for the redox state of the bottom waters in the basin indicate that Dry Creek mineralization took place in suboxic to periodically anoxic bottom waters. Trace element data show higher contents of Tl-Mn-As in pyrite from the Anderson Mountain deposit compared to the Dry Creek or WTF deposits and thus suggest that Anderson Mountain may have formed at lower temperatures or under slightly more oxidizing conditions. No exact modern analogue for the tectonic setting of the Bonnifield VMS deposits is known, although the back-arc regions of the Okinawa Trough and Woodlark Basin satisfy the requirement for a submarine, extensional setting adjacent to a continental margin. Limited occurrences of peralkaline volcanic rocks occur in these two potential analogues, but the peralkalinity of those rocks is much less than that of the Mystic Creek Member metarhyolites in the Bonnifield district. The highly elevated trace element (e.g., Zr, Nb) contents of Mystic Creek metarhyolites suggest that a better analogue may be a submarine rifted continental margin. The calc-alkaline composition of the host rocks to the Anderson Mountain deposit suggests that mineralization there formed in a continental margin arc, outboard of the extended continental margin setting of the peralkaline-hosted Dry Creek and WTF deposits.

Alaska↗
USGS2015

Depositional conditions for the Kuna Formation, Red Dog Zn-PB-Ag-Barite District, Alaska, inferred from isotopic and chemical proxies

Water column redox conditions, degree of restriction of the depositional basin, and other paleoenvironmental parameters have been determined for the Mississippian Kuna Formation of northwestern Alaska from stratigraphic profiles of Mo, Fe/Al, and S isotopes in pyrite, C isotopes in organic matter, and N isotopes in bulk rock. This unit is important because it hosts the Red Dog and Anarraaq Zn-Pb-Ag &plusmn; barite deposits, which together constitute one of the largest zinc resources in the world. The isotopic and chemical proxies record a deep basin environment that became isolated from the open ocean, became increasingly reducing, and ultimately became euxinic. The basin was ventilated briefly and then became isolated again just prior to its demise as a discrete depocenter with the transition to the overlying Siksikpuk Formation. Ventilation corresponded approximately to the initiation of bedded barite deposition in the district, whereas the demise of the basin corresponded approximately to the formation of the massive sulfide deposits. The changes in basin circulation during deposition of the upper Kuna Formation may have had multiple immediate causes, but the underlying driver was probably extensional tectonic activity that also facilitated fluid flow beneath the basin floor. Although the formation of sediment-hosted sulfide deposits is generally favored by highly reducing conditions, the Zn-Pb deposits of the Red Dog district are not found in the major euxinic facies of the Kuna basin, nor did they form during the main period of euxinia. Rather, the deposits occur where strata were permeable to migrating fluids and where excess H 2 S was available beyond what was produced in situ by decomposition of local sedimentary organic matter. The known deposits formed mainly by replacement of calcareous strata that gained H 2 S from nearby highly carbonaceous beds (Anarraaq deposit) or by fracturing and vein formation in strata that produced excess H 2 S by reductive dissolution of preexisting barite (Red Dog deposits).

Alaska↗
USGS2004

Petroleum generation and migration in the Mesopotamian Basin and Zagros Fold Felt of Iraq: Results from a basin-modeling study

A regional 3-D total petroleum-system model was developed to evaluate petroleum generation and migration histories in the Mesopotamian Basin and Zagros fold belt in Iraq. The modeling was undertaken in conjunction with Middle East petroleum assessment studies conducted by the USGS. Regional structure maps, isopach and facies maps, and thermal maturity data were used as input to the model. The oil-generation potential of Jurassic source-rocks, the principal known source of the petroleum in Jurassic, Cretaceous, and Tertiary reservoirs in these regions, was modeled using hydrous pyrolysis (Type II-S) kerogen kinetics. Results showed that oil generation in source rocks commenced in the Late Cretaceous in intrashelf basins, peak expulsion took place in the late Miocene and Pliocene when these depocenters had expanded along the Zagros foredeep trend, and generation ended in the Holocene when deposition in the foredeep ceased. The model indicates that, at present, the majority of Jurassic source rocks in Iraq have reached or exceeded peak oil generation and most rocks have completed oil generation and expulsion. Flow-path simulations demonstrate that virtually all oil and gas fields in the Mesopotamian Basin and Zagros fold belt overlie mature Jurassic source rocks (vertical migration dominated) and are situated on, or close to, modeled migration pathways. Fields closest to modeled pathways associated with source rocks in local intrashelf basins were charged earliest from Late Cretaceous through the middle Miocene, and other fields filled later when compression-related traps were being formed. Model results confirm petroleum migration along major, northwest-trending folds and faults, and oil migration loss at the surface.

GeoArabia↗
USGS2007

The Russell gold deposit, Carolina Slate Belt, North Carolina

Gold deposits have been mined in the Carolina slate belt from the early 1800s to recent times, with most of the production from large mines in South Carolina. The Russell mine, one of the larger producers in North Carolina, is located in the central Uwharrie Mountains, and produced over 470 kg of gold. Ore grades averaged about 3.4 grams per tonne (g/ t), with higher-grade zones reported. The Russell deposit is interpreted to be a sediment-hosted, gold-rich, base-metal poor, volcanogenic massive sulfide deposit in which gold was remobilized, in part, during Ordovician metamorphism. The ore was deposited syngenetically with laminated siltstones of the late Proterozoic Tillery Formation that have been metamorphosed to a lower greenschist facies. The Tillery Formation regionally overlies subaerial to shallow marine rhyolitic volcanic and volcaniclastic rocks of the Uwharrie Formation and underlies the marine volcanic and sedimentary rocks of the Cid Formation. Recent mapping has shown that a rhyolitic dome near the Russell mine was extruded during the deposition of the lower part of the Tillery Formation, at about the same time as ore deposition. Relict mafic, rock fragments present in the ore zones suggest contemporaneous bimodal (rhyolite-basalt) volcanism. The maximum formation age of the Russell deposit is younger than 558 Ma, which is similar to that of the larger, well known Brewer, Haile, and Ridgeway deposits of South Carolina. Gold was mined from at least six zones that are parallel to the regional metamorphic foliation. These strongly deformed zones consist of northeast-trending folds, high-angle reverse faults, and asymmetric doubly plunging folds overturned to the southeast. The dominant structure at the mine is an asymmetric doubly plunging anticline with the axis trending N 45?? E, probably related to late Ordovician (456 ?? 2 Ma) regional metamorphism and deformation. Two stages of pyrite growth are recognized. Stage 1, primary, spongy pyrite, is present in thin massive sulfide layers parallel to bedding and intergrown with pyrrhotite, chalcopyrite, sphalerite, and sparse arsenopyrite. Stage 2, secondary pyrite, is present as euhedral, idiomorphic rims on spongy pyrite and as veinlets that parallel the regional foliation. Stage 1 pyrite was deposited syngenetically or diagenetically during or soon after sedimentation. Stage 2 pyrite overgrowths and veins resulted from recrystallization or remobilization of stage 1 pyrite, probably during deformation related to Ordovician regional metamorphism. It is proposed that the spongy texture of the stage 1 pyrite represents nucleation and growth of pyrite on organic matter, possibly of bacterial origin. Other textures, such as geometric voids in spongy pyrite, As-rich zones surrounding central voids, 60-??m ring structures composed of spongy pyrite, and layers of spongy pyrite interlayered with bedding laminations, also appear to indicate replacement of organic matter by pyrite. Stage 1 pyrite contains up to 0.06 wt percent gold. The ??34S values of pyrite in and near pyritic ore (3.5-4.5???), in the rhyolite dome (5.1-5.4???) and in the Tillery Formation (5.9-6.2???) are interpreted to reflect mixing of sulfur derived from igneous and seawater sources. Whole-rock ??18O values of nearby unaltered mudstone are about 11 per mil whereas those from altered mudstone at the deposit are 7.4 to 10.6 per mil. The lower ?? 18O values are interpreted to indicate possible high-temperature exchange between relatively low ??18O hydrothermal fluids and the wall rocks. Gold, As, K, and Mo are enriched relative to the regional background in both the ore zones and in pyrite veins and disseminations in the nearby rhyolite dome, suggesting a possible genetic link between the rhyolitic volcanism and the gold mineralization. ?? 2007 Society of Economic Geologists, Inc.

Economic Geology↗
USGS2009

Gold and trace element zonation in pyrite using a laser imaging technique: Implications for the timing of gold in orogenic and carlin-style sediment-hosted deposits

Laser ablation ICP-MS imaging of gold and other trace elements in pyrite from four different sediment- hosted gold-arsenic deposits has revealed two distinct episodes of gold enrichment in each deposit: an early synsedimentary stage where invisible gold is concentrated in arsenian diagenetic pyrite along with other trace elements, in particular, As, Ni, Pb, Zn, Ag, Mo, Te, V, and Se; and a later hydrothermal stage where gold forms as either free gold grains in cracks in overgrowth metamorphic and/or hydrothermal pyrite or as narrow gold- arsenic rims on the outermost parts of the overgrowth hydrothermal pyrite. Compared to the diagenetic pyrites, the hydrothermal pyrites are commonly depleted in Ni, V, Zn, Pb, and Ag with cyclic zones of Co, Ni, and As concentration. The outermost hydrothermal pyrite rims are either As-Au rich, as in moderate- to high- grade deposits such as Carlin and Bendigo, or Co-Ni rich and As-Au poor as in moderate- to low-grade deposits such as Sukhoi Log and Spanish Mountain. The early enrichment of gold in arsenic-bearing syngenetic to diagenetic pyrite, within black shale facies of sedimentary basins, is proposed as a critical requirement for the later development of Carlin-style and orogenic gold deposits in sedimentary environments. The best grade sediment-hosted deposits appear to have the gold climax event, toward the final stages of deformation-related hydrothermal pyrite growth and fluid flow. ?? 2009 Society of Economic Geologists, Inc.

Economic Geology↗
USGS2010

Geochemical evolution of a high arsenic, alkaline pit-lake in the Mother Lode Gold District, California

The Harvard orebody at the Jamestown gold mine, located along the Melones fault zone in the southern Mother Lode gold district, California, was mined in an open-pit operation from 1987 to 1994. Dewatering during mining produced a hydrologic cone of depression; recovery toward the premining ground-water configuration produced a monomictic pit lake with alkaline Ca-Mg-HCO 3 -SO 4 –type pit water, concentrations of As up to 1,200 μ g/L, and total dissolved solids (TDS) up to 2,000 mg/L. In this study, pit-wall rocks were mapped and chemically analyzed to provide a context for evaluating observed variability in the composition of the pit-lake waters in relationship to seasonal weather patterns. An integrated hydrogeochemical model of pit-lake evolution based on observations of pit-lake volume, water composition (samples collected between 1998–2000, 2004), and processes occurring on pit walls was developed in three stages using the computer code PHREEQC. Stage 1 takes account of seasonally variable water fluxes from precipitation, evaporation, springs, and ground water, as well as lake stratification and mixing processes. Stage 2 adds CO 2 fluxes and wall-rock interactions, and stage 3 assesses the predictive capability of the model. Two major geologic units in fault contact comprise the pit walls. The hanging wall is composed of interlayered slate, metavolcanic and metavolcaniclastic rocks, and schists; the footwall rocks are chlorite-actinolite and talc-tremolite schists generated by metasomatism of greenschist-facies mafic and ultramafic igneous rocks. Alteration in the ore zone provides evidence for mineralizing fluids that introduced CO 2 , S, and K 2 O, and redistributed SiO 2 . Arsenian pyrite associated with the alteration weathers to produce goethite and jarosite on pit walls and in joints, as well as copiapite and hexahydrite efflorescences that accumulate on wall-rock faces during dry California summers. All of these pyrite weathering products incorporate arsenic at concentrations from <100 up to 1,200 ppm. In the pit lake, pH and TDS reach seasonal highs in the summer epilimnion; pH is lowest in the summer hypolimnion. Arsenic and bicarbonate covary in the hypolimnion, rising as stratification proceeds and declining during winter rains. The computational model suggests that water fluxes alone do not account for this seasonal variability. Loss of CO 2 to the atmosphere, interaction with pit walls including washoff of efflorescent salts during the first flush and seasonal rainfall, and arsenic sorption appear to contribute to the observed pit-lake characteristics.

California↗
USGS1946

Preliminary chemical correlation of chromite with the containing rocks

Chromite investigations of the U. S. Geological Survey since 1939 indicate that economic deposits of chromite rich in normative spinel ((Mg, Fe)Al 2 O 4 ) occur in peridotites which are closely associated with gabbro; high-chrome chromites occur in feldspar-free peridotites; and chromites rich in both normative chromite ((Mg, Fe)Cr 2 O 4 ) and magnetite (FeFe 2 O 4 ) are found in the pyroxene-rich stratiform complexes. Reaction of high-alumina chromite with diopsidic gabbro to form anorthite, olivine, and enstatite is described, and some probable equilibria between chromite and silicate minerals are discussed. A plot of 63 complete analyses on a triangular prism of composition shows that chromites from different geologic provinces in the Western Hemisphere vary consistently and fall in overlapping, but distinct, fields. The chromites of the Caribbean Province, which occur in dunite and troctolite, have the general formula Cr (sub 25-80) Al (sub 15-75) Fe (sub 1-5) (Mg (sub 65-75) ) and average about Cr 50 Al 47 (Mg 70 ). The chromites of the Pacific Coast, which occur in dunite and saxonite, average about Cr 70 Al 24 (Mg 60 ) in the range Cr (sub 60-77) Al (sub 16-35) Fe (sub 3-12) (Mg (sub 45-75) ). The stratiform deposits of the Stillwater and Bushveld complexes occur in harzburgite and bronzitite, and are very much alike, averaging Cr 60 Al 32 (Mg 52 ) and Cr 58 Al 34 (Mg 44 ) respectively. Chromites from gabbroic facies of the Bushveld complex are much richer in normative magnetite, presumably reflecting a higher CaO: Al 2 O 3 ratio in the silicate environment.

Economic Geology↗
USGS1953

Iron deposits of the congonhas district, minas Gerais, Brazil

Various origins have been proposed for the itabirite and associated hematite ores of Minas Gerais, Brazil. The U.S. Geological Survey, in cooperation with the Brazilian Departamento Nacional da Produqao Mineral, has undertaken a comprehensive program of mapping of these Precambrian deposits, which bear many similarities to other Precambrian iron formations. Itabirite is a finely laminated quartz-iron oxide rock with more or less dolomite, corresponding to James's oxide facies. It occurs principally in the middle group of the Minas series-a eugeosynclinal assemblage of quartzite, schist, chemical precipitates, graywacke, and volcanic rocks. Iron and silica were precipitated rhythmically in a shallow restricted basin under somewhat acid conditions that inhibited the precipitation of carbonates. Erosion of moderately deformed rocks of the Minas series furnished sediments for the overlying conglomeratic Itacolumi series. Severe post-Itacolumi deformation folded and thrust-faulted rocks of both series; the accompanying regional metamorphism recrystallized the chert and iron oxide to quartz, specular hematite, and minor amounts of magnetite. Ultramafic intrusions antedate this diastrophism; granodiorites and various basic dike rocks are younger. Hydrothermal replacement of breccia zones in itabirite and of dolomitic beds associated with the iron formation produced high-grade specular hematite ore nearly free of impurities. The areal distribution of the deposits indicates that the solutions followed fault zones. Heated meteoric water may have been responsible for the replacement, as minerals of obvious magmatic origin are absent. Since early Tertiary time the area has been uplifted several thousand feet. Leaching and cementation related to the present surface have modified both the iron formation and the hematite deposits, giving rise to various types of commercial ore. © 1953 Society of Economic Geologists, Inc.

Economic Geology↗
USGS1954

The White Pine copper deposit, Ontonagon County, Michigan

Copper, largely in the mineral chalcocite, is found in the lowermost beds of the Nonesuch shale over many square miles near White Pine, Ontonagon County, Mich. The Nonesuch shale, of late Keweenawan age, is about 600 feet thick and is composed largely of gray siltstone. It overlies 2,300 to 5,500 feet of red sandstones and conglomerates, the Copper Harbor conglomerate. This formation, in turn, overlies the middle Keweenawan Portage Lake lava series, in which occur the famous native-copper deposits of the south shore of Lake Superior. The White Pine mine is 45 to 70 miles west-southwest of the principal native copper mines.The copper-bearing beds at White Pine are primarily in the lower 20to 25 feet of the Nonesuch shale. This cupriferous zone is divided in local usage into four stratigraphic units, which are, in ascending order, the lower sandstone (the uppermost bed of the Copper Harbor conglomerate), the parting shale, the upper sandstone, and the upper shale. The sequence of beds is almost identical in the upper and parting shales, suggesting cyclic sedimentation. This sequence and the distribution of sedimentary facies are attributed to two submergences, separated by an emergence, of a deltaic area.Practically all the copper occurs in the upper and parting shales, except in a small area near the White Pine fault where it is abundant in the upper and lower sandstones. It is present in five different layers in amounts that average from 1 to 3 percent. The total amount of copper in each bed is generally higher where the bed is thick, and thickness, in turn, seems to be greatest in areas that were hollows away from the main channel or channels of the ancient delta. Copper content of the shale beds typically decreases as their sand content increases. The extent of individual copper-bearing beds 1 to 3 feet thick is measurable in square miles.The local occurrence of copper in the upper and lower sandstone beds can be reasonably explained as the result of hydrothermal transportation from the White Pine fault up the dip of the relatively permeable sandstone to the crest of an adjacent anticline. Distribution of copper in the parting and upper shales, on the other hand, seems to be completely independent of local structure, faults, and rock permeability. For the area as a whole the control is lithologic and stratigraphic. Probably the copper was dropped into or precipitated within the original mud; it may conceivably have replaced with exquisite detail something else that was so deposited.

Michigan↗
USGS1964

Supergene iron ores of minas Gerais, Brazil

The iron ores of Minas Gerais , Brazil , fall into two categories: (1) hypogene hematite ore averaging 66 percent or more Fe, and (2) lower-grade supergene ores . Most ore now extracted is high-grade hypogene ore ; lower-grade supergene ores will be of much future value. All supergene ores formed by weathering of itabirite, a metamorphosed oxide-facies iron formation averaging about 38 percent Fe and 44 percent Si02. The Caue Itabirite crops out for about 540 linear kilometers in central Minas Gerais . Supergene ores fall into three intergradational categories: (1) enriched itabirite, averaging 49 percent Fe, easily con-centratable, with reserves about 25,000 million tons; (2) intermediate grade ores , averaging perhaps 63 percent Fe, with indicated and inferred reserves more than 600 million tons; and (3) canga, averaging between 57 and 62 percent Fe, with reserves in the hundreds of millions of tons. Disaggregation of hard and brittle itabirite by solution primarily of quartz and secondarily of other soluble constituents causes residual enrichment in iron with minor hydration of hematite. As weathering continues, most of the quartz is removed and more of the hematite is hydrated, producing intermediate grade ore . Secondary enrichment by limonite is important. The final weathering product is canga. In canga, almost all the iron is hydrated, and the rock is still further impoverished in Si02 and residually enriched in A1203 and P. Canga also forms by cementation of iron -rich detritus by limonite. Four factors control the supergene ore -forming process: (1) physiography, for ores occur on ridges and plateaus; (2) climate, for seasonal rainfall is apparently needed for the formation of extensive canga blankets; (3) grain size of the original itabirite, for quartz with a grain size much greater than 0.1 millimeter is not readily soluble; and (4) composition of the iron formation. The chemically inert and physically resistant canga blanket is essential to supergene ore formation because soft weathering products would otherwise be removed as fast as formed. Thus, canga gives time for the formation of other ore types. Iron fixed as cementing limonite in canga and as enriching limonite in intermediate grade ore was derived by leaching and hydration of hematite from itabirite. It probably moved in the ferrous state and was precipitated as insoluble hydrous ferric oxide primarily by oxygenation of the solutions, to a lesser extent by their evaporation at or near the surface, and to a still smaller degree by pH changes. The data show that the high-grade hematite ore , 66 percent Fe or higher, cannot have formed directly by supergene action. Geochemical processes resulting in supergene concentration of iron also concentrated alumina and phosphorus. The high-grade ore contains about the same low percentages of these materials as unweathered itabirite.

Minas Gerais↗
USGS1965

Nature and origin of the high-grade hematite ores of Minas Gerais, Brazil

The high - grade hematite deposits of Minas Gerais , Brazil , are those averaging more than 66% Fe and less than 1.5% H20+. They occur in the Caue Itabirite, a metamorphosed oxide-facies iron formation of Pre-cambrian age. This formation was intricately folded during an orogeny that metamorphosed pelitic rocks to the greenschist and almandine-amphi-bole fades, accompanied by the formation of granitic rocks. The folding produced much plastic rock flowage toward the axes of many folds, thickness of the itabirite ranging from a few to more than 1,400 m. Of 40 ore bodies on which enough information for judgments is available, 11 probably contain more than 100 million tons, 22 between 10 and 100 million tons, and 7 less than 10 million tons. At least two are thought to be larger than 400 million tons. The great majority of these ore bodies are associated with folded structures in the host itabirite, a few are associated with preore thrust faults, and some with abrupt steepening of regional linear structure. Most of the ore occurs in the lower, more siliceous two-thirds of the itabirite; some occurs in the upper third, which is locally dolomitic. Some of the ore is foliated, some unfoliated; the unfoliated cuts the foliated and heals ore breccias. The ore mineral is dominantly hematite . Ore was formed during the metamorphic cycle, after the folding. It is localized in relatively low-pressure, hence higher permeability, parts of folds. Ore replaced pre-existing itabirite, preserving structures. Regional metamorphism indicates that the metasomatizing fluids were at high temperature and under high confining pressure. Increasing solubility of quartz with gradually rising temperature caused metasomatic replacement of quartz by hematite picked up from iron formation by throughpassing fluids during the rising temperature cycle of metamorphism. Source of fluids is thought to have been first the metasedimentary rocks, then granitic gneiss and intrusive granite; the source of heat to have been the metasomatizing fluids and intrusive granite. The unfoliated iron ore healing brecciated foliated ore was deposited during the waning metamorphic cycle. Gold ore with associated tourmaline and cassiterite is found in porous but not massive iron ore . The abundant soft high - grade hematite ore formed from the more porous parts of the hard ore bodies, where metasomatism had not been complete, by supergene leaching of very minor quantities of hematite from crystal boundaries.

Minas Gerais↗
USGS1980

Textural and structural evidence for a predeformation hydrothermal origin of the Tungsten Queen Deposit, Hamme District, North Carolina

The Hamme tungsten district is composed of a series of steeply dipping quartz-wolframite veins in the Piedmont of North Carolina. Veins are concentrated near the border of the lower Paleozoic Vance County pluton, along its western contact with green-schist-facies metapelites and metavolcanic rocks of the Carolina slate belt. One of these quartz veins, the Snead-Walker, hosts the Tungsten Queen deposit. The vein is 0 to 10 m thick and trends N 35 degrees E for approximately 3,500 m through slate belt rocks and the granitic pluton. The deposit has been worked to a depth of nearly 520 m and contains eight en echelon ore lodes that plunge 42 degrees to 65 degrees between S 10 degrees E and S 10 degrees W. Ore lodes commonly are encased in thin lenses of quartz-sericite greisen. The principal ore mineral is huebnerite and is accompanied by scattered occurrences of pyrite, sphalerite, galena, chalcopyrite, and tetrahedrite. The gangue is predominantly quartz with minor amounts of fluorite, sericite, and carbonate.Studies of minor structures and mineral textures indicate that both the wall rock and the ore and gangue minerals within the vein have been deformed by at least two events. The first event produced relatively gentle, open, and shallow-plunging folds; later, an intense episode of right-lateral shearing developed steeply plunging, tight folds and numerous northeast-trending shears. This latter deformation also developed a prominent alignment of ore and gangue minerals oblique to the vein walls and may have formed the en echelon distribution of ore lodes.In relatively undeformed parts of the vein, clusters of euhedral huebnerite crystals are oriented perpendicular to vein layering. Some prismatic crystals have terminations with cappings of sulfides and in polished thin section show concentric growth zones. These features are similar to textures found in unmetamorphosed tungsten-bearing hydrothermal vein deposits such as those at Pasto Bueno, Peru; Carrock Fell, England; and Panasqueria, Portugal. The relationships of mineral textures and minor structures indicate that the Tungsten Queen deposit formed by open-space fillings of linear faults or fractures and was subsequently deformed by at least two episodes of folding and shearing.

North Carolina↗