Search USGS⌕ Search

SEARCH · Search USGS

Results for “Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2021

Reproductive health and endocrine disruption in smallmouth bass (Micropterus dolomieu) from the Lake Erie drainage, Pennsylvania, USA

Smallmouth bass Micropterus dolomieu were sampled from three sites within the Lake Erie drainage (Elk Creek, Twentymile Creek, and Misery Bay, an embayment in Presque Isle Bay). Plasma, tissues for histopathological analyses, and liver and testes preserved in RNALater® were sampled from 30 smallmouth bass (of both sexes) at each site. Liver and testes samples were analyzed for transcript abundance with Nanostring nCounter® technology. Evidence of estrogenic endocrine disruption was assessed by the presence and severity of intersex (testicular oocytes; TO) and concentrations of plasma vitellogenin in male fish. Abundance of 17 liver transcripts associated with reproductive function, endocrine activity, and contaminant detoxification pathways and 40 testes transcripts associated with male and female reproductive function, germ cell development, and steroid biosynthesis were also measured. Males with a high rate of TO (87–100%) and plasma vitellogenin were noted at all sites; however, TO severity was greatest at the site with the highest agricultural land cover. Numerous transcripts were differentially regulated among the sites and patterns of transcript abundance were used to better understand potential risk factors for estrogenic endocrine disruption. The results of this study suggest endocrine disruption is prevalent in this region and further research would benefit to identify the types of contaminants that may be associated with the observed biological effects.

Pennsylvania↗
USGS2008

TandEM: Titan and Enceladus mission

TandEM was proposed as an L-class (large) mission in response to ESA’s Cosmic Vision 2015–2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini–Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini–Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (Montgolfière) and possibly several landing probes to be delivered through the atmosphere.

Experimental Astronomy↗
USGS2010

Challenges in merging fisheries research and management: The Upper Mississippi River experience

The Upper Mississippi River System (UMRS) is a geographically diverse basin extending 10?? north temperate latitude that has produced fishes for humans for millennia. During European colonization through the present, the UMRS has been modified to meet multiple demands such as navigation and flood control. Invasive species, notably the common carp, have dominated fisheries in both positive and negative ways. Through time, environmental decline plus reduced economic incentives have degraded opportunities for fishery production. A renewed focus on fisheries in the UMRS may be dawning. Commercial harvest and corresponding economic value of native and non-native species along the river corridor fluctuates but appears to be increasing. Recreational use will depend on access and societal perceptions of the river. Interactions (e. g., disease and invasive species transmission) among fish assemblages within the UMRS, the Great Lakes, and other lakes and rivers are rising. Data collection for fisheries has varied in intensity and contiguousness through time, although resources for research and management may be growing. As fisheries production likely relies on the interconnectivity of fish populations and associated ecosystem processes among river reaches (e. g., between the pooled and unpooled UMRS), species-level processes such as genetics, life-history interactions, and migratory behavior need to be placed in the context of broad ecosystem- and landscape-scale restoration. Formal communication among a diverse group of researchers, managers, and public stakeholders crossing geographic and disciplinary boundaries is necessary through peer-reviewed publications, moderated interactions, and the embrace of emerging information technologies. ?? Springer Science+Business Media B.V. 2010.

Hydrobiologia↗
USGS2022

Seismic site characterization with shear wave (SH) reflection and refraction methods

Reflection and critically refracted seismic methods use traveltime measurements of body waves propagating between a source and a series of receivers on the ground surface to calculate subsurface velocities. Body wave energy is refracted or reflected at boundaries where there is a change in seismic impedance, defined as the product of material density and seismic velocity. This article provides practical guidance on the use of horizontally propagating shear wave (SH-wave) refraction and reflection methods to determine shear wave velocity as a function of depth for near-surface seismic site characterizations. Method principles and the current state of engineering practice are reviewed, along with discussions of limitations and uncertainty assessments. Typical data collection procedures are described using basic survey equipment, along with information on more advanced applications and emerging technologies. Eight case studies provide examples of the techniques in real-world seismic site characterizations performed in a variety of geological settings.

Journal of Seismology↗
USGS2014

Landscape effects on mallard habitat selection at multiple spatial scales during the non-breeding period

Previous studies that evaluated effects of landscape-scale habitat heterogeneity on migratory waterbird distributions were spatially limited and temporally restricted to one major life-history phase. However, effects of landscape-scale habitat heterogeneity on long-distance migratory waterbirds can be studied across the annual cycle using new technologies, including global positioning system satellite transmitters. We used Bayesian discrete choice models to examine the influence of local habitats and landscape composition on habitat selection by a generalist dabbling duck, the mallard (Anas platyrhynchos), in the midcontinent of North America during the non-breeding period. Using a previously published empirical movement metric, we separated the non-breeding period into three seasons, including autumn migration, winter, and spring migration. We defined spatial scales based on movement patterns such that movements >0.25 and <30.00 km were classified as local scale and movements >30.00 km were classified as relocation scale. Habitat selection at the local scale was generally influenced by local and landscape-level variables across all seasons. Variables in top models at the local scale included proximities to cropland, emergent wetland, open water, and woody wetland. Similarly, variables associated with area of cropland, emergent wetland, open water, and woody wetland were also included at the local scale. At the relocation scale, mallards selected resource units based on more generalized variables, including proximity to wetlands and total wetland area. Our results emphasize the role of landscape composition in waterbird habitat selection and provide further support for local wetland landscapes to be considered functional units of waterbird conservation and management.

Landscape Ecology↗
USGS2022

Lacunarity as a tool for assessing landscape configuration over time and informing long-term monitoring: An example using seagrass

Context Seagrasses are submerged marine plants that have been declining globally at increasing rates. Natural resource managers rely on monitoring programs to detect and understand changes in these ecosystems. Technological advancements are allowing for the development of patch-level seagrass maps, which can be used to explore seagrass meadow spatial patterns. Objectives Our research questions involved comparing lacunarity, a measure of landscape configuration, for seagrass to assess cross-site differences in areal coverage and spatial patterns through time. We also discussed how lacunarity could help natural resource managers with monitoring program development and restoration decisions and evaluation. Methods We assessed lacunarity of seagrass meadows for various box sizes (0.0001 ha to 400.4 ha) around Cat Island and Ship Island, Mississippi (USA). For Cat Island, we used seagrass data from 2011 to 2014. For Ship Island, we used seagrass data for seven dates between 1963 and 2014. Results Cat Island, which had more continuous seagrass meadows, had lower lacunarity (i.e., denser coverage) compared to Ship Island, which had patchier seagrass beds. For Ship Island, we found a signal of disturbance and path toward recovery from Hurricane Camille in 1969. Finally, we highlighted how lacunarity curves could be used as one of multiple considerations for designing monitoring programs, which are commonly used for seagrass monitoring. Conclusions Lacunarity can help quantify spatial pattern dynamics, but more importantly, it can assist with natural resource management by defining fragmentation and potential scales for monitoring. This approach could be applied to other environments, especially other coastal ecosystems.

Mississippi↗
USGS2026

Uncertainty quantification of geologic energy storage in depleted gas reservoirs using material balance equations embedded in a hierarchical errors-in-variables model

The storage potential for gas in geologic settings, such as depleted hydrocarbon reservoirs and solution-mined salt caverns, is becoming salient to future energy infrastructure planning. Technologies such as carbon capture, utilization, and storage, carbon dioxide-enhanced oil recovery, and natural gas and hydrogen storage help meet growing energy demands, reduce carbon emissions to meet climate goals, and provide energy security amid geopolitical uncertainties. Therefore, estimates of underground gas storage capacity could be useful for efficiently navigating the energy transitions. Material balance is a fundamental method in reservoir engineering for estimating original gas in place and potential storage capacity at the scale necessary for national assessments of subsurface pore space resources. However, the deterministic method cannot accommodate multiple data sources or quantify uncertainty in predictions. In this study, a method that embeds material balance equations within a hierarchical errors-in-variables model is proposed which allows the estimation of the distributions of reservoir properties needed for assessments. Uncertainties associated with these reservoir properties have traditionally been expert-elicited, whereas the uncertainty estimates from the proposed models are data-driven. Capacity and uncertainty estimates can be used in a probabilistic resource assessment, supplementing information traditionally used by assessors or even replacing this expert elicitation step when data are unavailable. Various regression models are compared in a case study of the Michigan Basin, a large contributor to the United States’ current natural gas storage capacity. In particular, errors-in-variables models help ameliorate regression dilution and can quantify uncertainty in predictions of pressure in addition to storage capacity. Overfitting is addressed by quantifying generalization error and model averaging in simple and stratified cross-validation against reported working gas capacity, representing the varying quality and quantity of available data. Incorporating a statistical framework into existing numerical methods in reservoir engineering can improve the quality of estimation, and in particular, this method brings rigor to uncertainty quantification as part of a larger effort by the U.S. Geological Survey to assess domestic energy gas storage resources in depleted hydrocarbon reservoirs.

Mathematical Geosciences↗
USGS2009

A test and re-estimation of Taylor's empirical capacity-reserve relationship

In 1977, Taylor proposed a constant elasticity model relating capacity choice in mines to reserves. A test of this model using a very large (n = 1,195) dataset confirms its validity but obtains significantly different estimated values for the model coefficients. Capacity is somewhat inelastic with respect to reserves, with an elasticity of 0.65 estimated for open-pit plus block-cave underground mines and 0.56 for all other underground mines. These new estimates should be useful for capacity determinations as scoping studies and as a starting point for feasibility studies. The results are robust over a wide range of deposit types, deposit sizes, and time, consistent with physical constraints on mine capacity that are largely independent of technology. ?? 2009 International Association for Mathematical Geology.

Natural Resources Research↗
USGS2009

Coal-to-liquids: Potential impact on U.S. coal reserves

The production of liquid fuels from coal will very likely become an important part of the hydrocarbon energy mix of the future, provided that technical and environmental obstacles are overcome economically. The coal industry should be able to handle a coal-to-liquids (CTL) industry of modest size, using 60-70 million short tons or 54-64 million metric tonnes of coal per annum, without premature depletion of the country's coal reserves. However, attempts to use CTL technology to replace all petroleum imports would deplete the nation's coal reserves by the end of the century. ?? 2009 U.S. Government.

Natural Resources Research↗
USGS2009

Unconventional energy resources: 2007-2008 review

This paper summarizes five 2007–2008 resource commodity committee reports prepared by the Energy Minerals Division (EMD) of the American Association of Petroleum Geologists. Current United States and global research and development activities related to gas hydrates, gas shales, geothermal resources, oil sands, and uranium resources are included in this review. These commodity reports were written to advise EMD leadership and membership of the current status of research and development of unconventional energy resources. Unconventional energy resources are defined as those resources other than conventional oil and natural gas that typically occur in sandstone and carbonate rocks. Gas hydrate resources are potentially enormous; however, production technologies are still under development. Gas shale, geothermal, oil sand, and uranium resources are now increasing targets of exploration and development, and are rapidly becoming important energy resources that will continue to be developed in the future.

Natural Resources Research↗
USGS2015

Unconventional energy resources: 2015 review. Shale gas and liquids

Introduction As the source rocks from which petroleum is generated, organic-rich shales have always been considered an important component of petroleum systems. Over the last few years, it has been realized that in some mudrocks, sufficient hydrocarbons remain in place to allow for commercial development, although advanced drilling and completion technology is typically required to access hydrocarbons from these reservoirs. Tight oil reservoirs (also referred to as continuous oil accumulations) contain hydrocarbons migrated from source rocks that are geologically/stratigraphically interbedded with or occur immediately overlying/underlying them. Migration is minimal in charging these tight oil accumulations (Gaswirth and Marra 2014 ). Companies around the world are now successfully exploiting organic-rich shales and tight rocks for contained hydrocarbons, and the search for these types of unconventional petroleum reservoirs is growing. Unconventional reservoirs range in geologic age from Ordovician to Tertiary (Silverman et al. 2005 ; EIA 2013a ).

Natural Resources Research↗
USGS2019

Conducting and interpreting fish telemetry studies: Considerations for researchers and resource managers

Telemetry is an increasingly common tool for studying the ecology of wild fish, with great potential to provide valuable information for management and conservation. For researchers to conduct a robust telemetry study, many essential considerations exist related to selecting the appropriate tag type, fish capture and tagging methods, tracking protocol, data processing and analyses, and interpretation of findings. For telemetry-derived knowledge to be relevant to managers and policy makers, the research approach must consider management information needs for decision-making, while end users require an understanding of telemetry technology (capabilities and limitations), its application to fisheries research and monitoring (study design), and proper interpretation of results and conclusions (considering the potential for biases and proper recognition of associated uncertainties). To help bridge this gap, we provide a set of considerations and a checklist for researchers to guide them in conducting reliable and management-relevant telemetry studies, and for managers to evaluate the reliability and relevance of telemetry studies so as to better integrate findings into management plans. These considerations include implicit assumptions, technical limitations, ethical and biological realities, analytical merits, and the relevance of study findings to decision-making processes.

Reviews in Fish Biology and Fisheries↗
USGS2019

The future of barriers and trapping methods in the sea lamprey (Petromyzon marinus) control program in the Laurentian Great Lakes

A major duty of the Great Lakes Fishery Commission (GLFC), created in 1955, was the development a program of eradication or management of sea lamprey populations in the Great Lakes for the protection of the Great Lakes fishery. Beginning in the 1980s the GLFC shifted sea lamprey control to an integrated pest management model seeking to deploy control measures which target multiple life stages. Currently control efforts focus on limiting the area of infestation using barriers to migratory adults and eradication of larvae from streams using selective pesticides. Feedback on program effectiveness is obtained by trapping migratory adult lamprey at a series of index sites around the basin. The GLFC continues to support multiple research initiatives to develop additional control, improve current control measures, and further advance the sea lamprey control program. During the past six decades sea lamprey control in the Great Lakes has evolved as the research program has identified technological advances. Here we summarize the current state and recent advancements for two of the sea lamprey control program’s core elements, barriers and traps, highlight challenges to be addressed to continue the advancement of these program elements, and provide a series of research questions to spur interest within the research community. Further, because considerable information about these program elements is scattered among grey literature and technical reports, we summarize the history of barriers and traps in sea lamprey control in the included appendices to provide relevant program background to anyone interested in pursuing these research topics.

Great Lakes↗
USGS2005

Part 2: A field study of enhanced remediation of Toluene in the vadose zone using a nutrient solution

The objective of this study was to test the effectiveness of a nitrate-rich nutrient solution and hydrogen peroxide (H 2 O 2 ) to enhance in-situ microbial remediation of toluene in the unsaturated zone. Three sand-filled plots were tested in three phases (each phase lasting approximately 2 weeks). During the control phase, toluene was applied uniformly via sprinkler irrigation. Passive remediation was allowed to occur during this phase. A modified Hoagland nutrient solution, concentrated in 150 L of water, was tested during the second phase. The final phase involved addition of 230 moles of H 2 O 2 in 150 L of water to increase the available oxygen needed for aerobic biodegradation. During the first phase, measured toluene concentrations in soil gas were reduced from 120 ppm to 25 ppm in 14 days. After the addition of nutrients during the second phase, concentrations were reduced from 90 ppm to about 8 ppm within 14 days, and for the third phase (H 2 O 2 ), toluene concentrations were about 1 ppm after only 5 days. Initial results suggest that this method could be an effective means of remediating a contaminated site, directly after a BTEX spill, without the intrusiveness and high cost of other abatement technologies such as bioventing or soil-vapor extraction. However, further tests need to be completed to determine the effect of each of the BTEX components.

Water, Air, & Soil Pollution↗
USGS2012

Fixed bed sorption of phosphorus from wastewater using iron oxide-based media derived from acid mine drainage

Phosphorus (P) releases to the environment have been implicated in the eutrophication of important water bodies worldwide. Current technology for the removal of P from wastewaters consists of treatment with aluminum (Al) or iron (Fe) salts, but is expensive. The neutralization of acid mine drainage (AMD) generates sludge rich in Fe and Al oxides that has hitherto been considered a waste product, but these sludges could serve as an economical adsorption media for the removal of P from wastewaters. Therefore, we have evaluated an AMD-derived media as a sorbent for P in fixed bed sorption systems. The homogenous surface diffusion model (HSDM) was used to analyze fixed bed test data and to determine the value of related sorption parameters. The surface diffusion modulus Ed was found to be a useful predictor of sorption kinetics. Values of Ed < 0.2 were associated with early breakthrough of P, while more desirable S-shaped breakthrough curves resulted when 0.2 < Ed < 0.5. Computer simulations of the fixed bed process with the HSDM confirmed that if Ed was known, the shape of the breakthrough curve could be calculated. The surface diffusion coefficient D s was a critical factor in the calculation of Ed and could be estimated based on the sorption test conditions such as media characteristics, and influent flow rate and concentration. Optimal test results were obtained with a relatively small media particle size (average particle radius 0.028 cm) and resulted in 96 % removal of P from the influent over 46 days of continuous operation. These results indicate that fixed bed sorption of P would be a feasible option for the utilization of AMD residues, thus helping to decrease AMD treatment costs while at the same time ameliorating the impacts of P contamination.

Pennsylvania↗
USGS2020

Drones provide a better method to find nests and estimate nest survival for colonial waterbirds: A demonstration with Western Grebes

Drone use in wildlife biology has greatly increased as they become cheaper and easier to deploy in the field. In this paper we describe a less invasive method of using drones and exploring their limitations for studying colonial nesting waterbirds. Western Grebes, like most colonial nesting waterbirds, can be very sensitive to human interaction. Using a 3DR Solo quad copter equipped with a high-resolution digital camera we were able to effectively map and monitor a Western Grebe breeding colony throughout the nesting period with a series of 6 flights. We were able to use drone collected aerial imagery to model nest survival while minimizing disturbance to the birds. However, we were not able to deploy the drone at all of our study sites. Our ability to effectively deploy the drone was hindered by the environmental and vegetation characteristics of a site. Drone technology can be a useful tool, especially when studying a species sensitive to human interaction. However, there researchers should carefully consider their species and study site to evaluate if a drone is the proper tool to meet their objectives.

Idaho↗
USGS1999

Simulation of scenario earthquake influenced field by using GIS

The method for estimating the site effect on ground motion specified by Borcherdt (1994a, 1994b) is briefly introduced in the paper. This method and the detail geological data and site classification data in San Francisco bay area of California, the United States, are applied to simulate the influenced field of scenario earthquake by GIS technology, and the software for simulating has been drawn up. The paper is a partial result of cooperative research project between China Seismological Bureau and US Geological Survey.

California↗
USGS2010

An overview of sensor calibration inter-comparison and applications

Long-term climate data records (CDR) are often constructed using observations made by multiple Earth observing sensors over a broad range of spectra and a large scale in both time and space. These sensors can be of the same or different types operated on the same or different platforms. They can be developed and built with different technologies and are likely operated over different time spans. It has been known that the uncertainty of climate models and data records depends not only on the calibration quality (accuracy and stability) of individual sensors, but also on their calibration consistency across instruments and platforms. Therefore, sensor calibration inter-comparison and validation have become increasingly demanding and will continue to play an important role for a better understanding of the science product quality. This paper provides an overview of different methodologies, which have been successfully applied for sensor calibration inter-comparison. Specific examples using different sensors, including MODIS, AVHRR, and ETM+, are presented to illustrate the implementation of these methodologies.

Frontiers of Earth Science in China↗