Search USGS⌕ Search

SEARCH · Search USGS

Results for “Southeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS1990

Variations in fluvial deposition on an alluvial plain: An example from the Tongue River Member of the Fort Union Formation (Paleocene), southeastern Powder River Basin, Wyoming, U.S.A.

The Tongue River Member of the Paleocene Fort Union Formation is an important coal-bearing sedimentary unit in the Powder River Basin of Wyoming and Montana. We studied the depositional environments of a portion of this member at three sites 20 km apart in the southeastern part of the basin. Six lithofacies are recognized that we assign to five depositional facies categorized as either channel or interchannel-wetlands environments. (1) Type A sandstone is cross stratified and occurs as lenticular bodies with concave-upward basal surfaces; these bodies are assigned to the channel facies interpreted to be the product of low-sinuosity streams. (2) Type B sandstone occurs in parallel-bedded units containing mudrock partings and fossil plant debris; these units constitute the levee facies. (3) Type C sandstone typically lacks internal structure and occurs as tabular bodies separating finer grained deposits; these bodies represent the crevasse-splay facies. (4) Gray mudrock is generally nonlaminated and contains ironstone concretions; these deposits constitute the floodplain facies. (5) Carbonaceous shale and coal are assigned to the swamp facies. We recognize two styles of stream deposition in our study area. Laterally continuous complexes of single and multistoried channel bodies occur at our middle study site and we interpret these to be the deposits of sandy braided stream systems. In the two adjacent study sites, single and multistoried channel bodies are isolated in a matrix of finer-grained interchannel sediment suggesting deposition by anastomosed streams. A depositional model for our study area contains northwest-trending braided stream systems. Avulsions of these systems created anastomosed streams that flowed into adjacent interchannel areas. We propose that during late Paleocene a broad alluvial plain existed on the southeastern flank of the Powder River Basin. The braided streams that crossed this surface were tributaries to a northward-flowing, basin-axis trunk stream that existed to the west.

Wyoming↗
USGS2001

Possible giant metamorphic core complex at the center of Artemis Corona, Venus

Hundreds of circular features on Venus known as coronae are characterized by annular fractures and commonly associated radial fractures and lava flows. Coronae are thought to have been produced by buoyant mantle diapirs that flatten and spread at the base of the lithosphere and cause fracturing, uplift, and magmatism. The interior of Artemis Corona, by far the largest corona at 2100 km diameter, is divided in half by a northeast-trending deformation belt that contains numerous rounded ridges resembling antiforms. The largest of these ridges, located at the center of Artemis Corona, is ∼5 km high on its steep northwest flank where it is adjacent to a flat-bottomed, 10-km-wide trough interpreted as a rift valley. The 280-km-long antiformal ridge is marked by perpendicular grooves that cross the ∼50-km-wide ridge and extend southeastward as far as 120 km across adjacent plains. The grooves abruptly terminate northwestward at the rift trough. The large antiformal ridge terminates southwestward at a transform shear zone that parallels the grooves. These features—rift valley, antiformal uplift, grooves, and transform shear zone—are morphologically and geometrically similar to grooved, elevated, submarine metamorphic core complexes on the inside corners of ridge-transform intersections of slow-spreading ridges on Earth. As with submarine core complexes, the grooved surface on Venus is interpreted as the footwall of a large-displacement normal fault, and the grooves are inferred to be the product of plastic molding of the footwall to irregularities on the underside of the hanging wall followed by tectonic exhumation of the molded grooves and conveyer-belt–like transport up and over the large antiform and across the southeastern plains. According to this interpretation, the trend of the grooves records the direction of extension, which is perpendicular to the thrusts at the leading edge of the annular thrust belt 1000 km to the southeast. Both may have formed at the same time as a result of uniform southeastward displacement of the southeastern half of the interior of Artemis Corona. The location of this grooved core complex at the center of Artemis Corona may reflect genesis above the buoyant, ascending tail of the corona-producing mantle diapir.

Geological Society of America Bulletin↗
USGS1981

Estimating usable resources from historical industry data

Historical production statistics are used to predict the quantity of remaining usable resources. The commodities considered are mercury, copper and its byproducts gold and silver, and petroleum; the production and discovery data are for the United States. The results of the study indicate that the cumulative return per unit of effort, herein measured as grade of metal ores and discovery rate of recoverable petroleum, is proportional to a negative power of total effort expended, herein measured as total ore mined and total exploratory wells or footage drilled. This power relationship can be extended to some limiting point (a lower ore grade or a maximum number of exploratory wells or footage), and the apparent quantity of available remaining resource at that limit can be calculated. For mercury ore of grades at and above 0.1 percent, the remaining usable resource in the United States is calculated to be 54 million kg (1,567,000 flasks). For copper ore of grades at and above 0.2 percent, the remaining usable copper resource is calculated to be 270 million metric tons (298 million short tons); remaining resources of its by-products gold and silver are calculated to be 3,656 metric tons (118 million troy ounces) and 64,676 metric tons (2,079 million troy ounces), respectively. The undiscovered recoverable crude oil resource in the conterminous United States, at 3 billion feet of additional exploratory drilling, is calculated to be nearly 37.6 billion barrels; the undiscovered recoverable petroleum resource in the Permian basin of western Texas and southeastern New Mexico, at 300 million feet of additional exploratory drilling or 50,000 additional exploratory wells, is calculated to be about 6.2 billion BOE (barrels of oil equivalent).

Economic Geology↗
USGS1984

Maps showing distribution of pH, copper, zinc, fluoride, uranium, molybdenum, arsenic, and sulfate in water, Richfield 1° x 2° quadrangle, Utah

These maps show the regional distribution of copper, zinc, arsenic, molybdenum, uranium, fluoride, sulfate, and pH in surface and ground water from the Richfield 1° x 2° quadrangle. This study supplements (Miller and others, 1984a-j) the regional drainage geochemical study done for the Richfield quadrangle under the U.S. Geological Survey’s Conterminuous United States Mineral Assessment Program (CUSMAP). Regional sampling was designed to define broad geochemical patterns and trends which can be used, along with geologic and geophysical data, to assess the mineral resource potential of the Richfield quadrangle. Analytical data used in compiling this report were published previously (McHugh and others, 1981). The Richfield quadrangle in west-central Utah covers the eastern part of the Pioche-Marysvale igneous and mineral belt that extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 250 km into central Utah. The western two-thirds of the Richfield quadrangle is in the Basin and Range Province, and the eastern third in the High Plateaus of Utah subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of latest Precambrian and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrane into a series of north-trending fault blocks; the uplifted mountain areas were deeply eroded and the resulting debris deposited in the adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed during igneous activity in the middle and late Cenozoic time.

Utah↗
USGS2010

Recent U.S. Geological Survey Studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada-Results of a 5-Year Project

This report presents summary papers of work conducted between 2002 and 2007 under a 5-year project effort funded by the U.S. Geological Survey Mineral Resources Program, formerly entitled 'Tintina Metallogenic Province: Integrated Studies on Geologic Framework, Mineral Resources, and Environmental Signatures.' As the project progressed, the informal title changed from 'Tintina Metallogenic Province' project to 'Tintina Gold Province' project, the latter being more closely aligned with the terminology used by the mineral industry. As Goldfarb and others explain in the first chapter of this report, the Tintina Gold Province is a convenient term used by the mineral exploration community for a 'region of very varied geology, gold deposit types, and resource potential'. The Tintina Gold Province encompasses roughly 150,000 square kilometers, bounded by the Kaltag-Tintina fault system on the north and the Farewell-Denali fault system on the south. It extends westward in a broad arc, some 200 km wide, from northernmost British Columbia, through the Yukon, through southeastern and central Alaska, to southwestern Alaska. The climate is subarctic and, in Alaska, includes major physiographic delineations and ecoregions such as the Yukon-Tanana Upland, Tanana-Kuskokwim Lowlands, Yukon River Lowlands, and the Kuskokwim Mountains. Although the Tintina Gold Province is historically important for some of the very first placer and lode gold discoveries in northern North America, it has recently seen resurgence in mineral exploration, development, and mining activity. This resurgence is due to both new discoveries (for example, Pogo and Donlin Creek) and to the application of modern extraction methods to previously known, but economically restrictive, low-grade, bulk-tonnage gold resources (for example, Fort Knox, Clear Creek, and Scheelite Dome). In addition, the Tintina Gold Province hosts numerous other mineral deposit types, possessing both high and low sulfide content, which are not currently in development.

Scientific Investigations Report↗
USGS1991

The southeastern Illinois earthquake of 10 June 1987: The later aftershocks

The 10 June 1987 southeastern Illinois earthquake (mbLg = 5.2) was the seventh in a series of moderate magnitude (≧ 4.5) MMI VII shocks to occur in the Wabash Valley seismic zone of southeastern Illinois and southwestern Indiana since 1891. Located about 200 km east of St. Louis, Missouri, the shock caused minor damage in the epicentral area, had a contiguous felt area of about 433,000 km2, and had a total felt area over 1 million km2. Within 47 hours after the main shock, a cooperative effort between the U.S. Geological Survey and Memphis State University installed a 15-station aftershock monitoring network (later expanded to 21 instruments) that recorded more than 100 aftershocks in the following 4-day period. Results from the 56 aftershocks that were well located indicate a compact, cylindrically shaped aftershock volume about 1.7 km long, 0.8 km wide, and with a vertical distribution between about 9 and 12 km in depth. Composite focal mechanism solutions of the aftershocks suggest that the predominant mode of faulting is reverse slip, but some strike-slip type motion occurred similar to the mechanism for the main shock as determined from teleseismic data. The maximum principal compressive stress (P axes) is oriented easterly to east-southeasterly and is subhorizontal in plunge. These results, combined with historical observations and the recent discovery of earthquake-induced liquefaction features in the area, imply that the seismic potential of the zone may be greater than generally perceived.

Illinois↗
USGS1995

Ground Water Atlas of the United States: Segment 2, Arizona, Colorado, New Mexico, Utah

This chapter of the Ground Water Atlas of the United States describes the aquifers in Arizona, Colorado, New Mexico, and Utah. These four States, which comprise Segment 2 of this Atlas, are located in the Southwestern United States and extend from the rolling grasslands of the Great Plains on the east across the Rocky Mountains and Continental Divide to the desert basins of the Southwest. The 425,000-square-mile area ranges in altitude from about 14,400 feet above sea level in the Rocky Mountains of Colorado to about 100 feet near the lower Colorado River in southwestern Arizona. All the ground water in Segment 2 ultimately is derived from infiltration of precipitation, which varies considerably with the altitude and topography of the area. The Great Plains Physiographic Province of the Central United States extends into eastern Colorado and New Mexico (fig. 1), where flat to rolling prairie (fig. 2) with scattered hills and bluffs gradually rises westward to 5,000 to 7,000 feet above sea level and abruptly gives way to the frontal ranges of the Rocky Mountains in the Southern Rocky Mountain and Basin and Range Physiographic Provinces. West of the frontal ranges in Colorado and northern New Mexico are additional and higher mountain ranges generally oriented north-south but with many spurs and extensions oriented in other directions. The many ranges of the Rocky Mountains are separated by valleys and high mountain parks (fig. 3). Colorado contains about three-fourths of the Nation's land area above 10,000 feet and has 53 mountain peaks higher than 14,000 feet. Most of these high peaks are located near the Continental Divide (fig. 1), which extends approximately north-south through central Colorado and western New Mexico. The altitude of the divide decreases in southern New Mexico to less than 4,500 feet in a few areas. Farther westward, the mountains are less prevalent and are interspersed with broad structural basins. These basins and the broad valleys of the middle Colorado River and its tributaries form the irregular intermontane topography of the Colorado Plateaus Physiographic Province (fig. 4). Plateaus and high mesas are formed where the surface has been dissected by rugged canyons carved by the Colorado River and its tributaries (fig. 5). The largest of these canyons-the Grand Canyon-extends about 220 miles southwestward from the mouth of the Little Colorado River in Arizona and ranges from 4 to 18 miles in width and from 2,700 to 5,700 feet in depth below the rim. Small mountain ranges and intervening broad desert valleys of the Basin and Range Physiographic Province are prevalent to the west and south of the Colorado Plateaus in western Utah, southern Arizona, and southern New Mexico (fig. 1). These mountain ranges generally protrude 3,000 to 6,000 feet above the surrounding valley floor (fig. 6) and commonly extend from 20 to 50 miles in a north or northwesterly direction. Small parts of the Middle Rocky Mountains and Wyoming Basin Physiographic Provinces extend into northwestern Colorado and northeastern Utah (fig. 1). The topography, geology, and hydrology of the two areas are described in Chapter 1 of this Atlas. Four of the Nation's major river systems have headwaters in the mountainous areas of Segment 2. The South Platte River of the Missouri River system drains the eastern slope of northern Colorado; the Arkansas River and its tributary, the Canadian River, drain southeastern Colorado and northeastern New Mexico; the Rio Grande and its tributary, the Pecos River, drain south-central Colorado and central New Mexico; and the Colorado River and its tributaries drain Arizona, eastern Utah, Northwestern New Mexico, and western Colorado (fig. 1). Western Utah is drained by numerous streams that terminate in local desert basins, the Great Salt Lake, or other local lakes and reservoirs. Because the Great Salt Lake lies in the Great Basin, which is the largest closed basin in North America, it has no outlet to the sea. The salinity of the lake water is about 20 percent or about 6 times the salinity of seawater. Most of Segment 2 is sparsely populated. The average population density of counties is less than 8 persons per square mile in about 65 percent of the four-State area (fig. 7). Population densities range from less than 0.5 person per square mile in a few rural counties to more than 4 ,000 persons per square mile in populous urban areas. The 1990 population of the four States was about 10 million; almost 70 percent of this population was in Arizona and Colorado. Most land in Segment 2 is undeveloped forest grassland, or desert shrubland, much of which is used for livestock grazing. Land used for production of commercial crops primarily is in eastern Colorado and eastern New Mexico.

Arizona, Colorado, New Mexico, Utah↗
USGS1973

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 1: Mud Lake Region, 1969-70 and Part 2: Observation Wells South of Arco and West of Aberdeen

The results of drilling test holes to depths of approximately 1,000 feet in the Mud Lake region show that a large part of the region is underlain by both sedimentary deposits and basalt flows. At some locations, predominantly sedimentary deposits were penetrated; at others, basalt flows predominated. The so-called Mud Lake-Market Lake barrier denotes a change in geology. From the vicinity of the barrier area, as described by Stearns, Crandall, and Steward (1938, p. 111), up the water-table gradient for at least a few tens of miles, the saturated geologic section consists predominantly of beds of sediments that are intercalated with numerous basalt flows. Downgradient from the barrier, sedimentary deposits are not common and practically all the water-bearing formations are basalt, at least to the depths explored so far. Thus, the barrier is a transition zone from a sedimentary-basaltic sequence to a basaltic sequence. The sedimentary-basaltic sequence forms a complex hydrologic system in which water occurs under water-table conditions in the upper few tens of feet of saturated material and under artesian conditions in the deeper material in the southwest part of the region. The well data indicate that southwest of the barrier, artesian pressures are not significant. Southwest of the barrier, few sedimentary deposits occur in the basalt section and, as described by Mundorff, Crosthwaite, and Kilburn (1964). ground water occurs in a manner typical of the Snake Plain aquifer. In several wells, artesian pressures are higher in the deeper formations than in the shallower ones, but the reverse was found in a few wells. The available data are not adequate to describe the water-bearing characteristics of the artesian aquifer nor the effects that pumping in one zone would have on adjacent zones. The water-table aquifer yields large quantities of water to irrigation wells.

Idaho↗
USGS2017

Reconstructing Common Era relative sea-level change on the Gulf Coast of Florida

To address a paucity of Common Era data in the Gulf of Mexico, we reconstructed ~ 1.1 m of relative sea-level (RSL) rise over the past ~ 2000 years at Little Manatee River (Gulf Coast of Florida, USA). We applied a regional-scale foraminiferal transfer function to fossil assemblages preserved in a core of salt-marsh peat and organic silt that was dated using radiocarbon and recognition of pollution, 137 Cs and pollen chronohorizons. Our proxy reconstruction was combined with tide-gauge data from four nearby sites spanning 1913–2014 CE. Application of an Errors-in-Variables Integrated Gaussian Process (EIV-IGP) model to the combined proxy and instrumental dataset demonstrates that RSL fell from ~ 350 to 100 BCE, before rising continuously to present. This initial RSL fall was likely the result of local-scale processes (e.g., silting up of a tidal flat or shallow sub-tidal shoal) as salt-marsh development at the site began. Since ~ 0 CE, we consider the reconstruction to be representative of regional-scale RSL trends. We removed a linear rate of 0.3 mm/yr from the RSL record using the EIV-IGP model to estimate climate-driven sea-level trends and to facilitate comparison among sites. This analysis demonstrates that since ~ 0 CE sea level did not deviate significantly from zero until accelerating continuously from ~ 1500 CE to present. Sea level was rising at 1.33 mm/yr in 1900 CE and accelerated until 2014 CE when a rate of 2.02 mm/yr was attained, which is the fastest, century-scale trend in the ~ 2000-year record. Comparison to existing reconstructions from the Gulf coast of Louisiana and the Atlantic coast of northern Florida reveal similar sea-level histories at all three sites. We explored the influence of compaction and fluvial processes on our reconstruction and concluded that compaction was likely insignificant. Fluvial processes were also likely insignificant, but further proxy evidence is needed to fully test this hypothesis. Our results indicate that no significant Common Era sea-level changes took place on the Gulf and southeastern Atlantic U.S. coasts until the onset of modern sea-level rise in the late 19th century.

Florida↗
USGS1994

Ground Water Atlas of the United States: Segment 7, Idaho, Oregon, Washington

The States of Idaho, Oregon, and Washington, which total 248,730 square miles, compose Segment 7 of this Atlas. The area is geologically and topographically diverse and contains a wealth of scenic beauty, natural resources, and ground and surface water that generally are suitable for all uses. Most of the area of Segment 7 is drained by the Columbia River, its tributaries, and other streams that discharge to the Pacific Ocean. Exceptions are those streams that flow to closed basins in southeastern Oregon and northern Nevada and to the Great Salt Lake in northern Utah. The Columbia River is one of the largest rivers in the Nation. The downstream reach of the Columbia River forms most of the border between Oregon and Washington. In 1990, Idaho, Oregon, and Washington had populations of 1.0 million, 2.8 million, and 4.9 million, respectively. The more densely populated parts are in lowland areas and stream valleys. Many of the mountains, the deserts, and the upland areas of Idaho, Oregon, and Washington lack major population centers. Large areas of Idaho and Oregon are uninhabited and are mostly public land (fig. 1) where extensive ground-water development is restricted. Surface water is abundant in Idaho, Oregon, and Washington, though not always available when and where needed. In some places, surface water provides much of the water used for public-supply, domestic and commercial, agricultural (primarily irrigation and livestock watering), and industrial purposes. In arid parts of Segment 7, however, surface water has long been fully appropriated, chiefly for irrigation. Ground water is used when and where surface-water supplies are lacking. Ground water is commonly available to shallow wells that are completed in unconsolidated-deposit aquifers that consist primarily of sand and gravel but contain variable quantities of clay and silt. Many large-yield public-supply and irrigation wells and thousands of domestic wells are completed in these types of aquifers, generally in areas of privately owned land (fig. 1). In many places, deeper wells produce water from underlying volcanic rocks, usually basalt. Most irrigation (fig. 2) is on lowlands next to streams and on adjacent terraces. Generally, lowlands within a few miles of a main stream are irrigated with surface water diverted by gravity flow from the main stream or a reservoir and distributed through a system of canals and ditches. In some areas, water is pumped to irrigate lands farther from the stream at a higher altitude. Along the Snake and Columbia Rivers, large pumping systems withdraw billions of gallons of water per day from the rivers to irrigate adjacent uplands that are more than 500 feet higher than the rivers. Elsewhere, irrigation water is obtained from large-capacity wells, where depth to water might exceed 500 feet below land surface. Aquifers in Idaho, Oregon, and Washington, as in most other States, differ considerably in thickness and permeability, and well yields differ accordingly. Ground-water levels in a few areas have declined as a result of withdrawals by wells. State governments have taken steps to alleviate declines in some areas by enacting programs that either limit the number of additional wells that can be completed in a particular aquifer (Ground-Water Management Area) or prevent further ground-water development (Critical Ground-Water Area). Segment 7 includes some of the driest parts of the Nation, as well as some of the wettest. Average annual precipitation (1951-80) ranges from less than 10 inches in arid parts of Idaho, Oregon, and Washington to more than 80 inches in the western parts of Oregon and Washington (fig. 3). Most storms generally move eastward through the area. The eastward-moving air absorbs the moisture that evaporates from the Pacific Ocean. As this air encounters the fronts of mountain ranges, it rises, cools, and condenses. Accordingly, the western sides of the mountain ranges receive the most precipitation. Much of the annual precipitation moves directly to streams as overland runoff. Some of the precipitation is returned to the atmosphere by evapotranspiration, which is the combination of evaporation from the surface and transpiration from the plants. A small part of the precipitation infiltrates the soil and percolates downward to recharge underlying aquifers. Average annual runoff ( 1951-80) in the segment varies considerably (fig. 4), and the distribution of the runoff generally parallels that of precipitation. In the arid and the semiarid parts of Segment 7, most precipitation replenishes soil moisture, evaporates, or is transpired by vegetation. Little is left to maintain streamflow or to recharge aquifers. In the wetter parts, much of the precipitation runs off the land surface to maintain streamflow, and because evaporation is usually less in wetter areas, more water is available to recharge aquifers. Precipitation that falls as snow generally does not become runoff until spring thaws begin. Reservoirs constructed on major streams to mitigate flooding and to store water for irrigation, hydroelectric-power generation, and recreation also affect the timing of runoff. The runoff is stored and subsequently released during drier periods to maintain downstream flow.

Idaho, Oregon, Washington↗
USGS2014

Concentrations, loads, and yields of total phosphorus, total nitrogen, and suspended sediment and bacteria concentrations in the Wister Lake Basin, Oklahoma and Arkansas, 2011-13

The Poteau Valley Improvement Authority uses Wister Lake in southeastern Oklahoma as a public water supply. Total phosphorus, total nitrogen, and suspended sediments from agricultural runoff and discharges from wastewater treatment plants and other sources have degraded water quality in the lake. As lake-water quality has degraded, water-treatment cost, chemical usage, and sludge production have increased for the Poteau Valley Improvement Authority. The U.S. Geological Survey (USGS), in cooperation with the Poteau Valley Improvement Authority, investigated and summarized concentrations of total phosphorus, total nitrogen, suspended sediment, and bacteria (Escherichia coli and Enterococcus sp.) in surface water flowing to Wister Lake. Estimates of total phosphorus, total nitrogen, and suspended sediment loads, yields, and flow-weighted mean concentrations of total phosphorus and total nitrogen concentrations were made for the Wister Lake Basin for a 3-year period from October 2010 through September 2013. Data from water samples collected at fixed time increments during base-flow conditions and during runoff conditions at the Poteau River at Loving, Okla. (USGS station 07247015), the Poteau River near Heavener, Okla. (USGS station 07247350), and the Fourche Maline near Leflore, Okla. (USGS station 07247650), water-quality stations were used to evaluate water quality over the range of streamflows in the basin. These data also were collected to estimate annual constituent loads and yields by using regression models. At the Poteau River stations, total phosphorus, total nitrogen, and suspended sediment concentrations in surface-water samples were significantly larger in samples collected during runoff conditions than in samples collected during base-flow conditions. At the Fourche Maline station, in contrast, concentrations of these constituents in water samples collected during runoff conditions were not significantly larger than concentrations during base-flow conditions. Flow-weighted mean total phosphorus concentrations at all three stations from 2011 to 2013 were several times larger than the Oklahoma State Standard for Scenic Rivers (0.037 milligrams per liter [mg/L]), with the largest flow-weighted phosphorus concentrations typically being measured at the Poteau River at Loving, Okla., station. Flow-weighted mean total nitrogen concentrations did not vary substantially between the Poteau River stations and the Fourche Maline near Leflore, Okla., station. At all of the sampled water-quality stations, bacteria (Escherichia coli and Enterococcus sp.) concentrations were substantially larger in water samples collected during runoff conditions than in water samples collected during base-flow conditions from 2011 to 2013. Estimated annual loads of total phosphorus, total nitrogen, and suspended sediment in the Poteau River stations during runoff conditions ranged from 82 to 98 percent of the total annual loads of those constituents. Estimated annual loads of total phosphorus, total nitrogen, and suspended sediment in the Fourche Maline during runoff conditions ranged from 86 to nearly 100 percent of the total annual loads. Estimated seasonal total phosphorus loads generally were smallest during base-flow and runoff conditions in autumn. Estimated seasonal total phosphorus loads during base-flow conditions tended to be largest in winter and during runoff conditions tended to be largest in the spring. Estimated seasonal total nitrogen loads tended to be smallest in autumn during base-flow and runoff conditions and largest in winter during runoff conditions. Estimated seasonal suspended sediment loads tended to be smallest during base-flow conditions in the summer and smallest during runoff conditions in the autumn. The largest estimated seasonal suspended sediment loads during runoff conditions typically were in the spring. The estimated mean annual total phosphorus yield was largest at the Poteau River at Loving, Okla., water-quality station. The estimated mean annual total phosphorus yield was largest during base flow at the Poteau River at Loving, Okla., water-quality station and at both of the Poteau River water-quality stations during runoff conditions. The estimated mean annual total nitrogen yields were largest at the Poteau River water-quality stations. Estimated mean annual total nitrogen yields were largest during base-flow and runoff conditions at the Poteau River at Loving, Okla., water-quality station. The estimated mean annual suspended sediment yield was largest at the Poteau River near Heavener, Okla., water-quality station during base-flow and runoff conditions. Flow-weighted mean concentrations indicated that total phosphorus inputs from the Poteau River Basin in the Wister Lake Basin were larger than from the Fourche Maline Basin. Flow-weighted mean concentrations of total nitrogen did not vary spatially in a consistent manner. The Poteau River and the Fourche Maline contributed estimated annual total phosphorus loads of 137 to 278 tons per year (tons/yr) to Wister Lake. Between 89 and 95 percent of the annual total phosphorus loads were transported to Wister Lake during runoff conditions. The Poteau River and the Fourche Maline contributed estimated annual total nitrogen loads of 657 to 1,294 tons/yr, with 86 to 94 percent of the annual total nitrogen loads being transported to Wister Lake during runoff conditions. The Poteau River and the Fourche Maline contributed estimated annual total suspended sediment loads of 110,919 to 234,637 tons/yr, with 94 to 99 percent of the annual suspended sediment loads being transported to Wister Lake during runoff conditions. Most of the total phosphorus and suspended sediment were delivered to Wister Lake during runoff conditions in the spring. The majority of the total nitrogen was delivered to Wister Lake during runoff conditions in winter.

Arkansas;Oklahoma↗
USGS1953

Stratigraphic sections of the Phosphoria Formation in Idaho, 1949: part I

The U.S. Geological Survey has recently measured and sampled the Phosphoria formation at many localities in Idaho and other western states. These data will not be fully synthesized for many years, but segments of the data, accompanied by little or no interpretation, are published as preliminary reports as they are assembled. This report, which contains abstracts of the sections measured in southeastern Idaho (fig. 1), is one of this series and is the fourth report of data gathered in Idaho; it includes about half of the data gathered in Idaho in 1949. The field and laboratory procedures adopted in these investigations are described rather fully in a previous report (McKelvey and others, 1953a). Many people have taken part in this investigation, which was organized and supervised by V. E. McKelvey. F. J. Anderson, D. F. Davidson, R. S. Jones, R. A. Smart, R. G. Waring, and J. D. Weiser participated in the description of strata and the collection of samples referred to in this report. T. K. Rigby assisted in the preparation of trenches and the collection, crushing, and splitting of samples in the field. The laboratory preparation of samples for chemical analysis was done in Denver, Colo., under the direction of W. P. Huleatt.

Idaho↗
USGS2002

Geohydrology of Southeastern Pennsylvania

Rapid population growth in southeastern Pennsylvania has increased the demand for ground water. In an effort to address the increased ground-water needs, a ground-water investigation in a 5,200-square-mile area of southeastern Pennsylvania was initiated. Information on the geohydrologic system of the area and the water-bearing capabilities of 51 geohydrologic units in six physiographic provinces or sections (Coastal Plain, Piedmont Upland, Piedmont Lowland, Gettysburg-Newark Lowland, South Mountain, and Reading Prong) has been summarized. Also included are statistical summaries by geohydrologic unit for well construction and discharge data (according to water use), as well as inorganic and radiochemical ground-water-quality data. Characteristics of the ground-water-flow system in the study area, as well as aquifer hydrologic properties, are related to geology, but can be modified by human development. Ground-water flow in the Coastal Plain Physiographic Province, is through intergranular or primary openings under either unconfined or confined aquifer conditions. Historically, ground-water flowed toward the Delaware and Schuylkill Rivers, but the original flow paths and water quality have been altered significantly by urbanization. In igneous and metamorphic rocks (Piedmont Upland, South Mountain, and Reading Prong), ground-water flows through a network of interconnected secondary openings (fractures, joints, cleavage planes). Ground water in the carbonate rocks (Piedmont Lowland) also flows through a network of secondary openings, but these openings have been enlarged by solution. In the Triassic sedimentary rocks (Gettysburg-Newark Lowland), thin tabular aquifers are separated by much thicker, strata-bound aquitards. The fractured Triassic bedrock forms a very complex, anisotropic, and heterogeneous aquifer with horizontal permeability much greater than vertical permeability. In general, ground-water flow in southeastern Pennsylvania takes place within local flow systems that discharge within days or weeks to adjacent stream valleys or surface-water bodies. Intermediate (South Mountain) and regional (Gettysburg-Newark Lowland) scale systems, however, in which residence times have been measured in months or years discharge to major streams or rivers that are located in different physiographic provinces or sections or tens of miles distant. Well depths, casing lengths, reported yields, and specific capacities can vary significantly by geohydrologic unit, use of well, and topographic setting. Wells drilled in the Weverton and Loudon Formations, undivided, and the Montalto Quartzite Member (South Mountain) have median well and casing lengths of 374 and 130 feet, respectively, significantly greater than in almost every other geohydrologic unit in the study area. Wells drilled in the Peach Bottom Slate and Cardiff Conglomerate, undivided (Piedmont Upland) are typically shallow, with a median well depth of 90 feet. Wells in the Marburg Schist (Piedmont Upland) have the lowest median casing length—5.5 feet. Wells in the Stonehenge Formation (Piedmont Lowland), the most productive unit in the study area, have a median reported yield of 200 gallons per minute and a median specific capacity of 27 gallons per minute per foot. The Cocalico Formation (Piedmont Lowland) is the least productive unit with a median reported well yield of 2.5 gallons per minute and a median specific capacity of 0.01 gallons per minute per foot. In general, high-demand wells are significantly deeper, use significantly more casing, and have significantly greater yields than domestic wells drilled in the same unit. Commonly, wells drilled in valleys will have greater reported yields and specific capacities than wells drilled in the same unit on slopes or hilltops. Except where adversely affected by human activities, the quality of ground water in southeastern Pennsylvania is suitable for most purposes. Yet several water-quality criteria are exceeded in many wells throughout the area. Water from 51 percent of 2,075 wells sampled had a pH higher or lower than the range specified in the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL). Of water samples analyzed, about 1 percent of 1,623 wells contained concentrations of chloride and 27 percent of 1,624 wells sampled contained concentrations of iron that exceeded the USEPA SMCL. Twenty-seven percent of 1,397 wells sampled contained water with manganese concentrations greater than the USEPA SMCL. Sulfate concentrations in the water of 3 percent of 1,699 wells sampled and total dissolved solids in the water from 10 percent of 1,590 wells sampled exceeded the USEPA SMCL. Concentrations of cadmium, chromium, cyanide, mercury, nickel, radium-226, selenium, and zinc in the water exceeded the USEPA maximum contaminant level (MCL) in less than 5 percent of the 183 to 620 wells sampled. Nine percent of 625 wells sampled contained water with lead concentrations that exceeded the USEPA MCL. Radon concentrations in the water of 92 percent of the 285 wells sampled exceeded the proposed USEPA MCL. Radium-228 in the water of 10 percent of the 240 wells sampled and nitrate in the water of 13 percent of 1,413 wells sampled exceeded the USEPA MCL. Gross-alpha activity in the water was measured only in the Chickies and Harpers Formations of the Piedmont Upland, with 23 percent of the 168 wells sampled exceeding the USEPA MCL.

Water-Resources Investigations Report↗
USGS1999

Geologic map of the Galaxias quadrangle (MTM 35217) of Mars

The Galaxias region (MTM 35217) is one of a series of 1:500,000-scale science study areas on Mars sponsored by NASA's Planetary Geology and Geophysics Program. Situated near the northern limit of lava flows associated with Elysium Mons, this region includes a mixture of volcanic and nonvolcanic terrains. The region is also of interest for the fluvial systems that originate along the distal margins of the Elysium lava flows. Resolution of Viking Orbiter images used to prepare the base map ranges from 40 to 160 m/pixel. High-resolution frames (40 to 80 m/pixel) are found in the southeastern part of the map area and along the north edge of the quadrangle, but over half the quadrangle is included in medium-resolution frames (150 m/pixel). Two 8 m/pixel, very high resolution scenes are available (see fig. 1). Interpretation is complicated by variable resolution and sun angles that vary from east to west illumination on different images. Mapping methods and principles are adapted from those developed for lunar photogeologic mapping by Shoemaker and Hackman (1962), refined by Wilhelms (1972), and successfully applied by many workers to a variety of planetary surfaces. Mapping units are distinguished by topography and texture and are ranked by relative age on the basis of superposition and transection relations. Material units are assigned to time-stratigraphic systems defined by Scott and Carr (1978) and Tanaka (1986). This area is included within earlier maps that used Mariner 9 images at 1:5,000,000 scale (Elston, 1979) and globally at 1:25,000,000 scale (Scott and Carr, 1978). Regional maps based on the much higher resolutions of Viking Orbiter allowed more detailed discrimination of materials by Greeley and Guest (1987) at 1:15,000,000 scale and Tanaka and others (1992) at 1:5,000,000 scale. Some map units on this 1:500,000-scale map correspond to, or are partially equivalent to, units on the larger scale maps of Greeley and Guest (1987) and Tanaka and others (1992). Established terminology is used where feasible, but the scale of this map requires that some new units be introduced and that some previous terminology be redefined. Photogeologic methods are limited; therefore, more than one geologic explanation is given for some material units that do not readily lend themselves to an unequivocal interpretation.

IMAP↗
USGS2015

California State Waters Map Series — Drakes Bay and vicinity, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Drakes Bay and Vicinity map area is located in northern California, about 30 km north of San Francisco and about 65 km south of Fort Ross. The map area is in the northern part of the Gulf of the Farallones National Marine Sanctuary, and it includes all or parts of four California Marine Protected Areas. The largely undeveloped onshore part of the map area, which occupies much of the southern and southeastern parts of the Point Reyes peninsula, is used primarily for grazing, as well as recreation, as it is home to the Point Reyes National Seashore. The triangular Point Reyes peninsula, which lies completely west of the San Andreas Fault Zone, is bounded by the steep terrain of Inverness Ridge along its northeastern margin, Tomales Point at its northernmost tip, Point Reyes at its southwesternmost point, and Bolinas at its southern end. The landscape in between includes (from southeast to northwest) the sandy beaches along Drakes Bay, the estuaries of Drakes Estero and Estero de Limantour, and the long, windswept Point Reyes Beach, which is backed by an extensive dune field. The seafloor in the map area generally extends from the shoreline to water depths of about 40 to 50 m, except for the area south of the Point Reyes headland where water depths reach 60 to 70 m. This bathymetric gradient south and west of the Point Reyes headland is related to north-side-up motion along the Point Reyes Fault Zone. Except for the bathymetric gradient across the Point Reyes Fault Zone, the bedrock platform in the nearshore and inner shelf areas (50 to 60 m depth) is relatively flat (less than 1.0°) and is overlain by sand-sized to coarser grained sediment. Finer grained sediments are found in water depths greater than 60 m south of the Point Reyes headland, but they also extend into shallower (less than 40 m) water within Drakes Bay. Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Drakes Bay and Vicinity map area was emergent and the shoreline was about 30 km south and west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. Offshore of the Point Reyes headland, granitic basement rocks are offset vertically about 1.4 km along the Point Reyes Fault Zone; this uplift, combined with west-side-up offset on the San Andreas Fault Zone, has resulted in uplift of the Point Reyes peninsula and the adjacent shelf. Late Pleistocene uplift of marine terraces on the southern Point Reyes peninsula suggests active deformation of offshore structures west of the San Andreas Fault Zone. Pervasive stratal thinning within inferred uppermost Pliocene and Pleistocene deposits above the west strand of the Point Reyes Fault Zone suggests Quaternary active shortening of the curvilinear, northeast- to north-dipping Point Reyes Fault Zone. Lack of clear deformation in the uppermost Pleistocene and Holocene deposits suggests that activity along the Point Reyes Fault Zone has ceased or slowed since about 21,000 years ago. Seafloor habitats in the Drakes Bay and Vicinity map area range from unconsolidated continental-shelf sediment to hard substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Sediment transport in the map area largely is controlled by surface waves and tidal currents in the nearshore and, at depths greater than 20 to 30 m, by tidal and subtidal currents. In the map area, nearshore littoral drift of sand and coarse sediment is to the south, owing to the dominant west-northwest swell direction, and scour from large waves and tidal currents removes and redistributes sediment over large areas of the inner shelf. Tidal currents are particularly strong over the shelf in the map area, and they dominate the current regime in the nearshore. Further offshore, bottom currents generally flow to the northwest, distributing finer grained sediment accordingly.

California↗
USGS2003

An overview of coastal land loss with emphasis on the southeastern United States

This report represents a general overview of the primary causes and consequences of coastal land loss. Most of the examples and references are from states bordering the Gulf of Mexico and the Atlantic Ocean where the largest magnitudes and highest rates of coastal land losses in the United States are recorded (Dahl, 2000). The report serves as an introductory guide to the topics and literature on coastal land loss, and acts as a link to ongoing research being conducted by the U.S. Geological Survey.

Open-File Report↗
USGS1978

Distribution of rutile in metamorphic rocks and implications for placer deposits

Pelitic units in the eastern Great Smoky Mountains of the North Carolina Blue Ridge contain rutile grains only in kyanite and higher zones. Adjacent non-pelitic rocks do not contain rutile at kyanite grade but commonly contain sphene. Detrital rutile breaks down at metamorphic grades lower than those at which metamorphic rutile forms. Similarly, pelitic rocks in southeastern Connecticut contain rutile grains above, but not below, the sillimanite isograd. Most non-pelitic rocks there contain rutile only in the hypersthene zone. The slight difference in behavior of rutile in the two terranes is attributed primarily to a slight difference in calcium content of the pelites. In both areas, rutile commonly appears first as inclusions in garnet. Geologic maps showing metamorphic and stratigraphic or compositional information should be useful as prospecting tools for placer deposits. A variety of rocks at granulite facies and pelitic rocks of the upper amphibolite facies contain rutile and these could provide an extensive source for rutile in rutile placer deposits. ?? 1978 Springer-Verlag.

Mineralium Deposita↗
USGS1982

Data on selected deep wells in south Florida

A data base of 870 deep wells was assembled for the south Florida part of the Southeastern Limestone Regional Aquifer Study. The data in this report are for wells in Broward, Collier , Dade, Hendry, Lee, Martin, Monroe, Palm Beach, and St. Lucie Counties. Data are compiled for water wells, oil test wells, injection wells, and monitor wells. These data consist of: (1) well identification and geographic location; (2) well construction and site use; (3) logs available (geologic and geophysical); and (4) selected water-quality parameters. The well locations are shown, by counties, on maps. The number of wells in each county are: Broward, 6; Collier, 237; Dade, 61; Hendry, 130; Lee, 226; Martin, 91; Monroe, 34; Palm Beach, 33; and St. Lucie, 52. Data are stored in the National Water Data Storage and Retrieval system (WATSTORE) in the following files: header, water-quality, and ground-water site inventory (GWSI). (USGS)

Open-File Report↗