Search USGS⌕ Search

SEARCH · Search USGS

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2023

Geology and undiscovered resource assessment of the potash-bearing, Middle Devonian (Givetian), Prairie Evaporite, Elk Point Basin, Canada and United States

The U.S. Geological Survey (USGS) assessed undiscovered potash resources in the Elk Point Basin in Canada and the United States as part of a global mineral resource assessment. The Elk Point Basin is a large, Middle Devonian (Givetian) intracratonic evaporite basin covering approximately 1,200,000 square kilometers (km 2 ) and filled mainly with marine evaporite and minor clastic sedimentary rocks that contain stratabound potash-bearing salt. The potash-bearing salt is concentrated in four stratigraphic members (Patience Lake, Belle Plaine, White Bear, and Esterhazy) in the upper 100 meters (m) of the Prairie Evaporite and are separated by beds of halite (NaCl) that contain lesser—presently non-economic—amounts of sylvite (KCl) and carnallite (KMgCl 3 ·6H 2 O). The principal ore-bearing salt contains mainly sylvite. Four permissive tracts were defined that permit the presence of undiscovered stratabound potash (both sylvite- and carnallite-bearing salt) using geological criteria. Permissive tracts are defined by the spatial extent of each stratigraphic member that is at least 1 m thick, are less than 3 kilometers (km) from the surface, contain at least 4 percent equivalent potassium oxide (K 2 O), and contain the currently known resources. The permissive tracts include known potash deposits and potash occurrences as wells or mines not in production and show where undiscovered potash resources may be present. Well data are used to define the extent, thickness, average K 2 O equivalent grades, and volumes of each member. Data were supplied by the Saskatchewan Geological Survey or were obtained from published National Instrument (NI) 43-101 technical reports and other published reports, such as annual 10-K reports or news releases. The Elk Point Basin is the world’s largest source of potash, producing 23.0 million metric tons (Mt) of potassium chloride (KCl) (the equivalent of about 14.4 Mt of K 2 O) in 2018. In terms of global importance, the Elk Point Basin may contain 40 to greater than 50 percent of the world’s potash resources. Since 1962, potash companies have mined more than 1.5 trillion metric tons of ore containing 605 Mt of KCl (the equivalent of about 380 Mt of K 2 O). The total value of the ore produced through 2018 is on the order of $70 trillion (CAD). Potash is currently produced from eight conventional and three underground solution mines at depths ranging from 900 m to nearly 1,800 m. Estimates of the amount of potash in the Elk Point Basin vary considerably and the data and methods used in those estimations are not well documented. Known potash resources are approximately 99 billion metric tons (Bt) of ore containing 22 Bt of K 2 O equivalent. As a result of new mine openings and increased production capacity at existing mines, the total production capacity of mines in the Elk Point Basin has increased significantly (to about 32.8 Mt of KCl or 22.8 Mt of K 2 O equivalent per year). Additional production capacity of about 31 Mt of KCl (or 17 Mt of K 2 O equivalent) per year could be realized over the next decade if several current (as of 2019) exploration and development projects reach production status. Stratabound potash-bearing salt of the Prairie Evaporite presently underlies a total area of about 188,000 km 2 and has a total volume of about 2,690 cubic kilometers (km 3 ). Post-depositional solution processes considerably modified the mineralogy and presence of the potash-bearing salt. These changes had a profound effect on the volume and grade of potash resources that remained in the Prairie Evaporite and are a major consideration of exploration and mining operations as well as in this assessment of undiscovered potash resources. This USGS assessment includes the locations and possible amounts of undiscovered potash resources in the Prairie Evaporite. Volumes for each stratigraphic member were computed using member thicknesses and areal extent modified by actual, estimated geologic loss owing to salt dissolution and extraction ratios, as well as estimated distribution of carnallite and sylvite. Both sylvite- and carnallite-bearing salts were assessed for potash in this study. The assessment uses modern published grade and tonnage data. The amount of undiscovered potash is estimated by using Monte Carlo simulations to combine volume estimates of the potash-bearing members with probability distributions for average grade and bulk density. Mean potash grades (expressed as percentage of K 2 O equivalent) calculated using drill core analyses are 17.76 for the Patience Lake Member, 15.98 for the Belle Plaine Member, 10.66 for the White Bear Member, and 15.30 for the Esterhazy Member. Geologic losses reported as extraction ratios during mining may range from 27.5 to 41.6 percent and are dependent on mining method and local geologic conditions. The assessment determined that mean estimated undiscovered K 2 O equivalent resources for the Patience Lake, Belle Plaine, White Bear, and Esterhazy Members are 340, 220, 34, and 190 Bt, respectively, and estimated a total mean of 790 Bt for the entire Prairie Evaporite above a depth of 3 km. The total mineralized rock tonnage is estimated to be about 5,000 Bt. Most of the assessed potash is located within Saskatchewan with lesser amounts in Alberta and Manitoba as well as Montana and North Dakota within the United States. Although carnallite is mined for potash in Europe, it has historically been avoided in mining plans for potash-producing companies in Saskatchewan because of mining, processing, and grade considerations. Carnallite-rich salt is locally present in concentrations and volumes that could be a significant resource of magnesium chloride (MgCl 2 ) obtained as a byproduct of processing the carnallite for potash. Previously estimated reserves (not NI 43-101 compliant) of mineralized material from 1955 to 2019 are 695 Mt at 22.1 percent MgCl 2 . The total amount of K 2 O equivalent as carnallite was estimated during this USGS assessment to be about 120 Bt (or 180 Bt KCl). With uncertainties in defining the areal extent of carnallite in each of the potash-bearing members, the amount of MgCl 2 as carnallite in the Elk Point Basin could be approximately 180 Bt.

Elk Point basin↗
USGS2013

Prolonged magmatic activity on Mars inferred from the detection of felsic rocks

Rocks dominated by the silicate minerals quartz and feldspar are abundant in Earth’s upper continental crust. Yet felsic rocks have not been widely identified on Mars, a planet that seems to lack plate tectonics and the associated magmatic processes that can produce evolved siliceous melts on Earth. If Mars once had a feldspar-rich crust that crystallized from an early magma ocean such as that on the Moon, erosion, sedimentation and volcanism have erased any clear surface evidence for widespread felsic materials. Here we report near-infrared spectral evidence from the Compact Reconnaissance Imaging Spectrometer for Mars onboard the Mars Reconnaissance Orbiter for felsic rocks in three geographically disparate locations on Mars. Spectral characteristics resemble those of feldspar-rich lunar anorthosites, but are accompanied by secondary alteration products (clay minerals). Thermodynamic phase equilibrium calculations demonstrate that fractional crystallization of magma compositionally similar to volcanic flows near one of the detection sites can yield residual melts with compositions consistent with our observations. In addition to an origin by significant magma evolution, the presence of felsic materials could also be explained by feldspar enrichment by fluvial weathering processes. Our finding of felsic materials in several locations on Mars suggests that similar observations by the Curiosity rover in Gale crater may be more widely applicable across the planet.

Nature Geoscience↗
USGS1984

Pegmatite/wallrock interactions, Black Hills, South Dakota: Progressive boron metasomatism adjacent to the Tip Top pegmatite

Interaction between country rock and fluids derived from the Tip Top pegmatite has resulted in a series of boron enriched assemblages. Between unaltered quartz-mica schist to the pegmatite contact is a succession of four mineral assemblages: 1. (1) Quartz-Biotite-Potassium Feldspar assemblage (Q-B-K), which consists essentially of the original metamorphic silicate assemblage plus anomalously high amounts of modal tourmaline 2. (2) Quartz-Biotite-Tourmaline assemblage (Q-B-T) 3. (3) Tourmaline-Quartz-Muscovite assemblage (T-Q-M) 4. (4) Tourmaline-Quartz assemblage (T-Q). Alkali elements (Cs, Rb, K, Li), SiO 2 , and Ba show a decrease from the Q-B-K assemblage to the T-Q assemblage. A1 2 O 3 , Ga, B, total Fe and Zn increase moderately from the Q-B-K assemblage to the T-Q assemblage. The mineral chemistries also change considerably. The Mg/(Mg + Fe 2+ ) ratios in biotites range from 0.54 to 0.50 in samples from the Q-B-K assemblage to 0.39 in the (Q-B-T) assemblage. The range in tourmaline end-member components from the Q-B-K assemblage to the T-Q assemblage is as follows: Q-B-K: Dravite .63 Schorl .23 Elbaite .05 Buergerite .09 T-Q: Dravite .23 Schorl .37 Elbaite .17 Buergerite .23 . Observed variations in mineral assemblage and whole rock chemistry within the alteration zone appear to a first approximation to be a function of μB 2 O 3 (boron metasomatism) and μK 2 O (alkali leaching). The breakdown of feldspar and biotite may be approximated by reactions: 2HCl + 2(K, Na)AlSi 3 O 8 /ai 2(K, Na)Cl + Al 2 SiO 5 + 5SiO 2 + H 2 O and 2 Annite + SiO 2 + 5Al 2 SiO 5 + 2NaCl + 6H 3 BO 3 /ai 2 Tourmaline + 2KCl + 7H 2 O. The alteration zone may represent either a single episode (B-, Cs-, Li-, Rb-enriched fluid) or multiple episodes (B, Zn, Mn fluid and Cs, Li, Rb fluid) of pegmatite fluid-schist interactions. In both situations, B in the aqueous fluid from the pegmatite reacts with the schist breaking down sheet silicate “traps” for Cs, Rb, Li, and K and forming tourmaline-rich assemblages.

Geochimica et Cosmochimica Acta↗
USGS2014

Porphyry copper assessment of East and Southeast Asia: Philippines, Taiwan (Republic of China), Republic of Korea (South Korea), and Japan

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of East and Southeast Asia as part of a global mineral resource assessment. The assessment covers the Philippines in Southeast Asia, and the Republic of Korea (South Korea), Taiwan (Province of China), and Japan in East Asia. The Philippines host world class porphyry copper deposits, such as the Tampakan and Atlas deposits. No porphyry copper deposits have been discovered in the Republic of Korea (South Korea), Taiwan (Province of China), or Japan. Thirteen geographic areas were delineated as tracts that are permissive for porphyry copper deposits in the assessed area. Individual tracts range from about 3,000 to 100,000 square kilometers in area. Permissive tracts are delineated on the basis of mapped distributions of igneous rocks of specific age ranges that define subduction-related magmatic arcs or magmatic belts that might contain porphyry copper deposits. Most of these magmatic arcs are subduction related, although some porphyry deposits and prospects are present in back-arc or poorly understood tectonic settings. Maps at various scales were used in the compilation; however, the final tract boundaries are intended for use at a scale of 1:1,000,000. Numbers of undiscovered deposits were estimated at different levels of confidence for 10 permissive tracts in the Philippines including one area that extends to eastern Taiwan (Republic of China); permissive tracts in South Korea and Japan are discussed qualitatively. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models using Monte Carlo simulation to estimate amounts of undiscovered resources. Grades and tonnages of known porphyry copper deposits in the study area were compared with global grade and tonnage models to determine the appropriate model for simulation of undiscovered resources. Most of the known deposits are best described as copper-gold subtypes of porphyry copper deposits. For some permissive tracts, a general porphyry copper-gold-molybdenum model was used. Thirty-eight porphyry copper deposits are known in the Philippines; the mean number of undiscovered deposits was estimated to be 28. Mean (arithmetic) resources that could be associated with the undiscovered deposits are 90 million metric tons of copper and 5,800 metric tons of gold, as well as byproduct molybdenum and silver. Additional resources that could be discovered in extensions to known deposits were not evaluated. Assessment results, presented in tables and graphs, indicate expected amounts of total contained metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. The Philippines have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in the region. South Korea and Japan have been thoroughly explored for many types of mineral deposits. Available data suggest that the permissive rocks in South Korea typically are too deeply eroded to preserve porphyry copper deposits. Porphyry copper systems may be present in Japan, but are likely to lie at depths greater than the 1 kilometer from the surface protocol adopted for this study. Descriptions of the geologic basis for delineating each tract, the data used, the geologic criteria and rationale for the assessment, and results of the assessment are included in appendixes along with the description of a geographic information system (GIS) that includes tract boundaries, known porphyry copper deposits and significant prospects, and assessment results.

Scientific Investigations Report↗
USGS1981

Map showing mineral-resource potential of the King Range and Chemise Mountain Instant Study Areas, Humboldt and Mendocino counties, California

The potential for economic development of energy-related or metallic mineral resources in the King Range and Chemise Mountain Instant Study Areas is low to moderate as indicated by geologic, geophysical, and geochemical investigations. No oil or gas seeps or coal seams were detected within the King Range or Chemise Mountain Study Area. The low porosity and permeability of the Franciscan sandstones that underlie these areas indicate a very low potential for oil or gas. The geothermal resource potential of these areas also is low. Minor manganese resources occur adjacent to the southeast corner of the King Range Instant Study Area near Queen Peak. The manganese forms small stratabound deposits associated with radiolarian chert and pillow basalt. The known deposits are too small and the manganese too low in concentration for further economic exploitation. Similar manganese mineralization may be within the belt of melange in the southeast corner of the King Range area and within the Chemise Mountain Instant Study Area, but economic deposits are unlikely. Although there has been historical base- and precious-metal exploration activity north of the King Range in the Mattole River drainage, our geologic and geochemical field data indicate almost no gold potential and low potentials for lead, zinc, copper, and silver. During this investigation, one high-grade vein and several minor veins containing lead, zinc, copper, and silver were discovered at Point Delgada immediately south of the King Range Instant Study Area. The vein mineralization is Miocene and cuts Cretaceous basalt flows, dikes, flow breccia, and younger overlying sedimentary rocks of the King Range. The vein mineralization at Point Delgada could be remobilized from more extensive unexposed stratabound base-metal mineralization at depth. Traces of lead and zinc detected within the King Range Instant Study Area may have similar stratabound or vein origins, but no resource potential is indicated. Minor copper mineralization with associated lead, zinc, and manganese anomalies within the Chemise Mountain Instant Study Area is of low economic potential because of the shearing, isolation, and lenticularity of the basaltic and cherty rocks within the melange mineralization.

California↗
USGS2011

Structural controls and evolution of gold-, silver-, and REE-bearing copper-cobalt ore deposits, Blackbird district, east-central Idaho: Epigenetic origins

The Cu-Co ± Au (± Ag ± Ni ± REE) ore deposits of the Blackbird district, east-central Idaho, have previously been classified as Besshi-type VMS, sedex, and IOCG deposits within an intact stratigraphic section. New studies indicate that, across the district, mineralization was introduced into the country rocks as a series of structurally controlled vein and alteration systems. Quartz-rich and biotite-rich veins (and alteration zones) and minor albite and siderite veinlets maintain consistent order and sulfide mineral associations across the district. Both early and late quartz veins contain chalcopyrite and pyrite, whereas intermediate-stage tourmaline-biotite veins host the cobaltite. Barren early and late albite and late carbonate (generally siderite) form veins or are included in the quartz veins. REE minerals, principally monazite, allanite, and xenotime, are associated with both tourmaline-biotite and late quartz veins. The veins are in mineralized intervals along axial planar cleavage, intrafolial foliation, and shears. Mineralized intervals are hosted by a variety of metasedimentary rocks, including three phyllitic units of Mesoproterozoic age and two schistose units. All of these units are S-tectonites in the footwall of a regional thrust fault. Specifically, the district lies within an oblique thrust ramp containing a series of structural horses (three domains) in a duplex system. The deposits span the three domains and are hosted by metamorphic rocks that range from lower amphibolite facies in the structurally upper domain to lower-middle greenschist facies in the lower domain (an inverted metamorphic sequence). Early quartz and biotite veins were introduced during progressive folding and prolonged peak metamorphic conditions and they underwent late-tectonic retrograde recrystallization and metamorphic mineral growth, to the same extent as the country rocks in each domain. Where little subsequent deformation occurred, early veins are discordant to bedding but, where folding was polyphase and fabrics are penetrative, mineralized zones are concordant with metamorphic compositional layering. Late quartz veins in the zones are associated with retrograde minerals and textures and are only locally deformed. 40 Ar/ 39 Ar dating of unoriented muscovite from the selvage of a late quartz vein yields a Late Cretaceous age of about 83 Ma, the time of retrograde metamorphism associated with introduction of late quartz veins. Textural data at all scales indicate that the host sites for veins and the tectonic evolution of both host rocks and mineral deposits were kinematically linked to Late Cretaceous regional thrust faulting. Heat, fluids, and conduits for generation and circulation of fluids were part of the regional crustal thickening. The faulting also juxtaposed metaevaporite layers in the Mesoproterozoic Yellowjacket Formation over Blackbird district host rocks. We conclude that this facilitated chemical exchange between juxtaposed units resulting in leaching of critical elements (Cl, K, B, Na) from metaevaporites to produce brines, scavenging of metals (Co, Cu, etc) from rocks in the region, and, finally, concentrating metals in the lower-plate ramp structures. Although the ultimate source of the metals remains undetermined, the present Cu-Co ± Au (± Ag ± Ni ± REE) Blackbird ore deposits formed during Late Cretaceous compressional deformation .

Idaho↗
USGS1988

Hydrothermal alteration patterns in the Breitenbush Hot Springs area, Cascade Range, Oregon

Rocks of early Miocene age in the Breitenbush Hot Springs area have been affected by at least two major episodes of hydrothermal alteration, one of which had temperatures in excess of 200??C. Alteration minerals in younger Tertiary rocks are characteristic of temperatures below 100??C. The most important factor in controlling alteration is fracture permeability. The best guide to interpreting alteration is secondary mineralogy of volcaniclastic and pyroclastic rocks, flow breccia, and vesiculated or fractured lavas; alteration effects in interbedded massive lava flows are much more subtle.

Conference Paper↗
USGS1989

Oxygen isotope exchange kinetics of mineral pairs in closed and open systems: Applications to problems of hydrothermal alteration of igneous rocks and Precambrian iron formations

The systematics of stable-isotope exchange between minerals and fluids are examined in the context of modal mineralogical variations and mass-balance considerations, both in closed and in open systems. On mineral-pair ??18O plots, samples from terranes that have exchanged with large amounts of fluid typically map out steep positively-sloped non-equilibrium arrays. Analytical models are derived to explain these effects; these models allow for different exchange rates between the various minerals and the external fluids, as well as different fluid fluxes. The steep arrays are adequately modelled by calculated isochron lines that involve the whole family of possible exchange trajectories. These isochrons have initially-steep near-vertical positive slopes that rotate toward a 45?? equilibrium slope as the exchange process proceeds to completion. The actual data-point array is thus analogous to the hand of an "isotopic clock" that measures the duration of the hydrothermal episode. The dimensionless ratio of the volumetric fluid flux to the kinetic rate parameter ( u k) determines the shape of each individual exchange trajectory. In a fluid-buffered system ( u k ??? 1), the solutions to the equations: (1) are independent of the mole fractions of the solid phases; (2) correspond to Taylor's open-system water/rock equation; and (3) yield straight-line isochrons that have slopes that approach 1 f, where f is the fraction reacted of the more sluggishly exchanging mineral. The isochrons for this simple exchange model are closely congruent with the isochrons calculated for all of the more complex models, thereby simplifying the application of theory to actual hydrothermal systems in nature. In all of the models an order of magnitude of time (in units of kt) separates steep non-equilibrium arrays (e.g., slope ??? 10) from arrays approaching an equilibrium slope of unity on a ??-?? diagram. Because we know the approximate lifetimes of many hydrothermal systems from geologic and heat-balance constraints, we can utilize the 18O 16O data on natural mineral assemblages to calculate the kinetic rate constants (k's) and the effective diffusion constants (D's) for mineral-H2O exchange: these calculated values (kqtz ??? 10-14, kfeld ??? 10-13-10-12) agree with experimental determinations of such constants. In nature, once the driving force or energy source for the external infiltrating fluid phase is removed, the disequilibrium mineral-pair arrays will either: (1) remain "frozen" in their existing state, if the temperatures are low enough, or (2) re-equilibrate along specific closed-system exchange vectors determined solely by the temperature path and the mineral modal proportions. Thus, modal mineralogical information is a particularly important parameter in both the open- and closed-system scenarios, and should in general always be reported in stable-isotopic studies of mineral assemblages. These concepts are applied to an analysis of 18O 16O systematics of gabbros (Plagioclase-clinopyroxene and plagioclase-amphibole pairs), granitic plutons (quartz-feldspar pairs), and Precambrian siliceous iron formations (quartz-magnetite pairs). In all these examples, striking regularities are observed on ??-?? and ??-?? plots, but we point out that ??-?? plots have many advantages over their equivalent ??-?? diagrams, as the latter are more susceptible to misinterpretation. Using the equations developed in this study, these regularities can be interpreted to give semiquantitative information on the exchange histories of these rocks subsequent to their formation. In particular, we present a new interpretation indicating that Precambrian cherty iron formations have in general undergone a complex fluid exchange history in which the iron oxide (magnetite precursor?) has exchanged much faster with low-temperature (< 400??C) fluids than has the relatively inert quartz. ?? 1989.

Chemical Geology↗
USGS2024

Layered intrusions in the Precambrian: Observations and perspectives

Layered intrusions are plutonic bodies of cumulates that form by the crystallization of mantle-derived melts. These intrusions are characterized by igneous layering distinguishable by shifts in mineralogy, texture, or composition. Layered intrusions have been fundamental to our understanding of igneous petrology; however, it is their status as important repositories of critical metals – such as platinum-group elements, chromium, and vanadium – that has predominantly driven associated research in recent decades. Many layered intrusions were emplaced during the Precambrian, predominantly at the margins of ancient cratons during intervals of supercontinent accretion and destruction. It appears that large, layered intrusions require rigid crust to ensure their preservation, and their geometry and layering is primarily controlled by the nature of melt emplacement. Layered intrusions are best investigated by integrating observations from various length-scales. At the macroscale, intrusion geometries can be discerned, and their presence understood in the context of the regional geology. At the mesoscale, the layering of an intrusion may be characterized, intrusion-host rock contact relationships studied, and the nature of stratiform mineral occurrences described. At the microscale, the mineralogy and texture of cumulate rocks and any mineralization are elucidated, particularly when novel microtextural and mineral chemical datasets are integrated. For example, here we demonstrate how mesoscale observations and microscale datasets can be combined to understand the petrogenesis of the perplexing snowball oiks outcrop located in the Upper Banded Series of the Stillwater Complex. Our data suggest that the orthopyroxene oikocrysts did not form in their present location, but rather formed in a dynamic magma chamber where crystals were transported either by convective currents or within crystal-rich slurries. Critical metals may be transported to the level of a nascent intrusion as dissolved components in the melt. Alternatively, ore minerals are entrained from elsewhere in a plumbing system, potentially facilitated by volatile-rich phases. There are many ore-forming processes propounded by researchers to occur at the level of emplacement; however, each must address the arrival of the ore mineral, its concentration of metals, and its accumulation into orebodies. In this contribution, several of these processes are described as well as our perspectives on the future of layered intrusion research.

Precambrian Research↗
USGS2021

Petrology and geochronology of 1.48 to 1.45 Ga igneous rocks in the St. Francois Mountains terrane, southeast Missouri

The igneous geology of the St. Francois Mountains terrane in southeast Missouri is dominated by the products of 1.48 to 1.45 billion year old volcanic and plutonic magmatism but also includes volumetrically minor, compositionally bimodal contributions added during plutonism between 1.34 and 1.27 billion years ago. The 1.48 to 1.45 billion year old igneous rocks in the St. Francois Mountains terrane are bimodally distributed between volumetrically dominant felsic rocks and volumetrically minor rocks with mafic to intermediate compositions. All of these rocks are ferroan, which like most of their trace element abundances, suggests a genesis associated with farfield intraplate extensional tectonism and decompression-related magmatism. The diversity of compositions among 1.48 to 1.45 billion year old igneous rocks in the St. Francois Mountains terrane probably reflects mixtures of mantle-derived mafic inputs and low-degree partial melting of more evolved crustal protoliths. Newly determined ages define essentially continuous magmatism during the 30-million-year period between 1.48 and 1.45 billion years ago. The products of this magmatism are essentially coeval, whether intrusive or extrusive or having mafic, intermediate, or felsic compositions. In addition, the iron oxide-apatite (for example, Pea Ridge) and likely the iron oxide-copper gold (Boss) deposits in the St. Francois Mountains terrane have ages coincident with this magmatic episode. Spatial and temporal relations between 1.48 to 1.45 billion year old igneous rocks in the St. Francois Mountains terrane and the mineral deposits they host suggest the associated magmatic and mineralization processes are also genetically related. Geochemical, petrographic, geochronologic, and terrane-wide physical characteristics of the 1.48 to 1.45 billion year old igneous rocks in the St. Francois Mountains terrane are consistent with an origin involving extension well inboard from the margin of the Laurentian craton, associated mantle upwelling, lower crustal melting in response to mantle-derived thermal inputs, and mixing of mantle- and juvenile lower crustal-derived melts. Significant major and trace element compositional dispersion characteristics of these rocks likely reflect midcrustal magma reservoir fractionation of their principal rock-forming minerals. The resultant magmas constitute a series of variably hybridized reservoirs, emplaced at upper levels in the crust, that form a series of plutonic and associated eruptive products.

Missouri↗
USGS1990

Trace-element and Sr, Nd, Pb, and O isotopic composition of Pliocene and Quaternary alkali basalts of the Patagonian Plateau lavas of southernmost South America

The Pliocene and Quaternary Patagonian alkali basalts of southernmost South America can be divided into two groups. The "cratonic" basalts erupted in areas of Cenozoic plateau volcanism and continental sedimentation and show considerable variation in 87Sr/86Sr (0.70316 to 0.70512), 143Nd/144Nd (e{open}Nd) and 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios (18.26 to 19.38, 15.53 to 15.68, and 38.30 to 39.23, respectively). These isotopic values are within the range of oceanic island basalts, as are the Ba/La, Ba/Nb, La/Nb, K/Rb, and Cs/Rb ratios of the "cratonic" basalts. In contrast, the "transitional" basalts, erupted along the western edge of the outcrop belt of the Pliocene and Quaternary plateau lavas in areas that were the locus of earlier Cenozoic Andean orogenic arc colcanism, have a much more restricted range of isotopic composition which can be approximated by 87Sr/86Sr=0.7039??0.0004, e{open}Nd, 206Pb/204Pb=18.60??0.08, 207Pb/204Pb=15.60??0.01, and 208Pb/204Pb=38.50??0.10. These isotopic values are similar to those of Andean orogenic are basalts and, compared to the "cratonic" basalts, are displaced to higher 87Sr/86Sr at a given 143Nd/144Nd and to higher 207Pb/204Pb at a given 208Pb/204Pb. The "transitional" basalts also have Ba/La, Ba/Nb, La/Nb, and Cs/Rb ratios higher than the "cratonic" and oceanic island basalts, although not as high as Andean orogenic are basalts. In contrast to the radiogenic isotopes, ??18O values for both groups of the Patagonian alkali basalts are indistinguishable and are more restricted than the range reported for Andean orogenic are basalts. Whole rock ??18O values calculated from mineral separates for both groups range from 5.3 to 6.5, while measured whole rock ??18O values range from 5.1 to 7.8. The trace element and isotopic data suggest that decreasing degrees of partial melting in association with lessened significance of subducted slabderived components are fundamental factors in the west to east transition from arc to back-arc volcanism in southern South America. The "cratonic" basalts do not contain the slab-derived components that impart the higher Ba/La, Ba/Nb, La/Nb, Cs/Rb, 87Sr/86Sr at a given 143Nd/144Nd, 207Pb/204Pb at a given 208Pb/204Pb, and ??18O to Andean orogenic arc basalts. Instead, these basalts are formed by relatively low degrees of partial melting of heterogeneous lower continental lithosphere and/or asthenosphere, probably due to thermal and mechanical pertubation of the mantle in response to subduction of oceanic lithosphere below the western margin of the continent. The "transitional" basalts do contain components added to their source region by either (1) active input of slab-derived components in amounts smaller than the contribution to the mantle below the arc and/or with lower Ba/La, Ba/Nb, La/Nb, and Cs/Rb ratios than below the arc due to progressive downdip dehydration of the subducted slab; or (2) subarc source region contamination processes which affected the mantle source of the "transitional" basalts earlier in the Cenozoic. ?? 1990 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS1987

Summary mineral resource appraisal of the Richfield 1° x 2° quadrangle, west-central Utah

The mineral resource potential of the Richfield 1° x 2° quadrangle, Utah, has been appraised using geological, geophysical, geochemical, and remote-sensing techniques. These studies have led to many publications giving basic data and interpretations; of these, a series of 18 maps at 1:250,000 and 1:500,000 scales summarizing aspects of the geology, geophysics, geochemistry, and remote sensing is designated the CUSMAP (Conterminous United States Mineral Appraisal Program) folio. This circular uses the data shown on these maps to appraise the mineral resource potential of the quadrangle. The oldest rocks exposed in the Richfield quadrangle are small patches of Early Proterozoic (1.7 billion years old) gneiss and schist on the west side of the Mineral Mountains. These rocks presumably formed the basement on which many thousands of meters of Late Proterozoic, Paleozoic, and lower Mesozoic sedimentary strata were deposited. These rocks were deformed during the Late Cretaceous Sevier orogeny when Precambrian and Paleozoic strata in the western part of the quadrangle were thrust relatively eastward across Paleozoic and Mesozoic strata in the eastern part of the quadrangle. Late Cretaceous and early Tertiary highlands above the overthrust belt were eroded and much of the debris was deposited in broad basins east of the belt. Volcanism in Oligocene and earliest Miocene time formed an east-northeast-trending belt of calcalkalic volcanoes across the southern half of the quadrangle. In early Miocene time, the composition of the volcanic rocks changed to a bimodal assemblage of mafic rocks and high-silica alkali rhyolite that has been erupted episodically ever since. Syngenetic mineral resources developed during formation of both sedimentary and volcanic rocks. These include limestone and dolomite, silica-rich sandstone, metalliferous black shale, evaporite deposits, zeolite deposits, pumice, cinders and scoria, and evaporitic or diagenetic deposits in playa environments. Most of these deposits need to have markets established, or extraction and fabrication techniques developed, for them to be utilized. Most epigenetic deposits are of volcanogenic-hydrothermal origin. Deposits associated with calc-alkalic igneous activity largely contain Cu, Pb, Zn, Au, and Ag, and occur in a variety of types zoned around core intrusions. Younger deposits are mostly associated with silicic igneous centers belonging to the bimodal mafic-silicic igneous association. Resources associated with this latter group are likely to contain one or more of the elements Mo, W, U, Sn, Be, and F, as well as Pb, Zn, Au, and Ag. Alunite and kaolinite deposits are found at many mineralized centers. Most epigenetically mineralized areas expose only the upper, near-surface parts of the different hydrothermal systems; most of whatever mineral deposits formed in these systems probably still exist at depth, awaiting discovery. Our conclusion is that many mineralized areas have excellent possibilities for the occurrence of mineral resources. Each of the many identified centers of mineralization is discussed briefly in this report and an estimate made of its resource potential.

Utah↗
USGS2001

Geology and mineral deposits of the Minnie Moore and Bullion mineralized areas, Blaine County, Idaho

In the early 1880?s the discovery of rich ores in the Minnie Moore and Bullion mineralized areas sparked a rush to settle and develop the Wood River valley. Silver and lead discoveries in these areas spurred the boom in mining after completion of the Oregon Short Line Railroad to Hailey in 1883. In both areas the ore comprises galena, sphalerite, and tetrahedrite in a gangue of siderite, calcite, or quartz. Minor goldbearing quartz veins are also present. The ore is in fissure and replacement veins along fracture systems that formed in Late Cretaceous time, after intrusion of nearby granodiorite or quartz diorite stocks. The ore formed under mesothermal conditions and heat was supplied by the nearby plutons. In the Minnie Moore area, the mineralized veins are cut by low-angle normal faults that are of probable Eocene age. In the Minnie Moore mineralized area, the host rock is the middle part of the Devonian Milligen Formation, (the informal Lucky Coin limestone and Triumph argillite), which is the same stratigraphic level as the host ore in the rich Triumph mine northeast of Hailey. In the Bullion mineralized area, the ore is hosted by the lower member of the Middle Pennsylvanian to Lower Permian Dollarhide Formation. Rich ore was mined in several tunnels that reached the Mayflower vein, a northwest-striking mineralized shear zone. The deposits are thought to be mainly mesothermal veins that formed in association with Cretaceous magmatism. The syngenetic stratiform model of ore formation has often been applied to these deposits, however, no evidence of syngenetic mineralization was found in this study. Faulting has displaced most of the major orebodies and thus has made mining these deposits a challenge.

Bulletin↗
USGS2001

Permeability reduction in granite under hydrothermal conditions

The formation of impermeable fault seals between earthquake events is a feature of many models of earthquake generation, suggesting that earthquake recurrence may depend in part on the rate of permeability reduction of fault zone materials under hydrothermal conditions. In this study, permeability measurements were conducted on intact, fractured, and gouge-bearing Westerly granite at an effective pressure of 50 MPa and at temperatures from 150° to 500°C, simulating conditions in the earthquake-generating portions of fault zones. Pore fluids were cycled back and forth under a 2 MPa pressure differential for periods of up to 40 days. Permeability of the granite decreased with time t , following the exponential relation k = c (10 − rt ). For intact samples run between 250° and 500°C the time constant for permeability decrease r was proportional to temperature and ranged between 0.001 and 0.1 days −1 (i.e., between 0.4 and 40 decades year −1 loss of permeability). Values of r for the lower-temperature experiments differed little from the 250°C runs. In contrast, prefractured samples showed higher rates of permeability decrease at a given temperature. The surfaces of the fractured samples showed evidence of dissolution and mineral growth that increased in abundance with both temperature and time. The experimentally grown mineral assemblages varied with temperature and were consistent with a rock-dominated hydrothermal system. As such mineral deposits progressively seal the fractured samples, their rates of permeability decrease approach the rates for intact rocks at the same temperature. These results place constraints on models of precipitation sealing and suggest that fault rocks may seal at a rate consistent with earthquake recurrence intervals of typical fault zones.

California↗
USGS1984

MINERALOGICAL STUDIES OF THE HYDROTHERMAL SYSTEM IN NEWBERRY VOLCANO DRILL HOLE 2, OREGON.

Studies of secondary mineral distribution, whole-rock chemical compositions, isotopes, and fluid inclusions are being conducted on the core from Newberry Volcano drill hole 2. Rocks from the drill core are divided into 3 major intervals on the basis of their alteration pattern, which is controlled by rock permeabilities, primary lithologies, and temperatures. Incomplete alteration of pumice-rich lithic tuff layers in the upper part of the altered section and lack of self-sealing in fractures of most lava flows suggest that the hydrothermal system is young. Most of the secondary minerals could have been formed at temperatures near those present today; maximum measured temperature was 265 degree C at the bottom of the hole. Fluid inclusions indicate that past temperatures in the deeper part of the drill hole may have been as much as 100 degree C hotter than presently measured temperatures.

Conference Paper↗