Search USGS⌕ Search

SEARCH · Search USGS

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2012

Life at the hyperarid margin: novel bacterial diversity in arid soils of the Atacama Desert, Chile

Nearly half the earth's surface is occupied by dryland ecosystems, regions susceptible to reduced states of biological productivity caused by climate fluctuations. Of these regions, arid zones located at the interface between vegetated semiarid regions and biologically unproductive hyperarid zones are considered most vulnerable. The objective of this study was to conduct a deep diversity analysis of bacterial communities in unvegetated arid soils of the Atacama Desert, to characterize community structure and infer the functional potential of these communities based on observed phylogenetic associations. A 454-pyrotag analysis was conducted of three unvegetated arid sites located at the hyperarid-arid margin. The analysis revealed communities with unique bacterial diversity marked by high abundances of novel Actinobacteria and Chloroflexi and low levels of Acidobacteria and Proteobacteria , phyla that are dominant in many biomes. A 16S rRNA gene library of one site revealed the presence of clones with phylogenetic associations to chemoautotrophic taxa able to obtain energy through oxidation of nitrite, carbon monoxide, iron, or sulfur. Thus, soils at the hyperarid margin were found to harbor a wealth of novel bacteria and to support potentially viable communities with phylogenetic associations to non-phototrophic primary producers and bacteria capable of biogeochemical cycling.

Atacama Desert↗
USGS1998

Mountains and Calderas on Io: Possible Implications for Lithosphere Structure and Magma Generation

The combination of Voyager images and newly acquired Galileo images with low illumination and resolutions ranging from 2 to 6 km/pixel now allows determination of the global distribution of mountains and volcanic centers on Io. The mountains generally do not have characteristics typical of terrestrial volcanic landforms, they are evenly distributed across the surface and show no obvious correlation with known hot spots or plumes. Relative elevations, determined by shadow measurements and stereoscopy, indicate that mountains in the newly imaged area range in elevation up to at least 7.6 km. The origin of the mountains remains uncertain. Some appear to be multitiered volcanic constructs; others enclosing the partial remains of large circular depressions appear to be remnants of old volcanoes; yet others show extensive tectonic disruption. Volcanic centers also appear to be distributed evenly across the surface except for an apparently somewhat lower density at high latitudes. The low latitudes have one volcanic center per 7 ?? 104km2, and, on average, the centers are spaced roughly 250 km apart. The global distribution of high mountains suggests that the lithosphere over most of Io is thick. Although the thickness cannot be calculated, the previously suggested 30 km appears reasonable as a lower limit. The high rates of resurfacing combined with the likely dissipation of most of the tidal energy in the asthenosphere and underlying mantle implies a very low temperature gradient in the upper part of the lithosphere and steep gradients in the lower lithosphere. The slow rate of separation of melt from host rock in the magma source regions as a consequence of the low gravity on Io, coupled with the high rate of magma production, will likely result in larger melt fractions than is typical for source regions on Earth. The variety of volcanic landforms suggests that volcanic products with a range of compositions are deposited on the surface. This mixture will be carried downward through the lithosphere as a consequence of the 0.5-1.5 cm/yr resurfacing rates. During descent, the more volatile components will tend to be driven off early, but complete or near-complete melting at the base of the lithosphere may result in rehomogenization of the silicate mixture that remains. ?? 1998 Academic Press.

Icarus↗
USGS1972

Occurrence of chromian, hercynitic spinel ("pleonaste") in Apollo-14 samples and its petrologic implications

Many isolated grains of a reddish pleonaste-type spinel occur in fines and metabreccia samples, particularly 14 319. Electron microprobe analyses (104) of spinels and their associated phases include 58 of pleonaste which show Mg/(Mg + Fe) 0.44–0.62 and Cr/(Cr + Al) 0.017–0.134 (atomic), plus minor amounts of other ions, and differ greatly from almost all previously recorded lunar spinels; almost no spinels of intermediate composition were found. Two types of compositional zoning exist: a diffuse primary one with cores lower in Ti, and a narrow secondary one from reaction with matrix yielding rims higher in Cr, Ti, and Mn. At contacts with breccia matrix there is a narrow corona of almost pure plagioclase (An 80 -An 94 ), free of opaque minerals and pyroxene. Two types of solid inclusions found in the pleonaste are calcic plagioclase, and tiny spherical masses of nickel-rich sulfide. Similar pleonaste occurs in crystalline rock clasts, mainly with plagioclase; one clast (A) consists only of coarse olivine, plagioclase, and pleonaste, with granulated grain boundaries suggestive of deformation. From composition and texture, this clast is one possible candidate for the mafic cumulate counterpart of the “anorthositic” crust. Another clast (B), also made solely of olivine, plagioclase and pleonaste, is itself a breccia. These data suggest a two-stage brecciation process: 1) disruption (probably pre-Imbrian) of a deep-seated pleonaste-bearing source rock like A and reconsolidation to form a breccia without addition of pyroxene, ilmenite or other minerals; and 2) disruption of this breccia to yield breccia clast B which was then incorporated into the Fra Mauro formation.

Earth and Planetary Science Letters↗
USGS1957

Thermal waters of volcanic origin

Waters of widely differing chemical compositions have been considered at least in part volcanic in origin, and are commonly associated with each other in the same area. Do any or all of these types contain volcanic components, and if so, how are the different types derived? To determine the probable characteristics of volcanic waters, the writer has selected hot-spring groups that are particularly high in temperature and associated heat flow, are associated with late Tertiary or Quaternary volcanism, and are therefore most likely to contain some water and chemical components of direct volcanic origin. Of the different types of water that occur in these groups, one of the most common is characterized chemically by a dominance of sodium chloride. Isotopic evidence indicates that the contribution of water of direct volcanic origin is not large and is probably no more than 5 per cent in typical sodium-chloride springs. The compositions of volcanic waters are believed to be determined by: [1] type of magma and stage of crystallization; [2] temperature and pressure of the emanation at different stages during and after departure from the magma; [3] chemical composition, relative quantity, and depth of penetration of mixing meteoric water and water of other origin; and [4] reactions with wall rocks. Although the type of magma and its stage of crystallization are of major interest and have been emphasized in the past, the outstanding characteristics of volcanic emanations at and near the surface of the earth seem to be controlled for the most part by the other factors. Nonvolatile compounds are slightly to highly soluble in steam at high pressure, and high-density steam has solvent properties similar to those of liquid water. In the volcanic sodium-chloride waters, the high ratio of lithium to sodium and potassium is shown to indicate that alkalies were transported as alkali halides dissolved in a dense vapor. This in turn demands a deep circulation of meteoric water for steam to condense at high pressure and for the halides to remain in solution. The depth of circulation of meteoric water in the sodium-chloride spring systems is believed to be in the order of 2 miles. Where circulation of meteoric water is shallow, the vapors rise and expand at low pressure, which does not permit transport of substances of low volatility; some type of water other than the sodium-chloride type is formed. The common volcanic sodium-chloride waters are therefore concluded to be the diluted product of high-density emanations, modified by reactions with wall rocks and by precipitation of the less soluble components. Emanations at high temperature and relatively low pressure consist almost entirely of steam and volatile components. Their compositions are therefore relatively simple, and their ability to transport matter of low volatility is very limited. The sodium-chloride type is probably gradational into acid-sulfate-chloride waters. There is some evidence that, under conditions not well understood, sulfur may be emitted as SO 2 , SO 3 , or other sulfur species of intermediate valence, rather than as H 2 S or S. Other major types of volcanic waters are called sodium bicarbonate, acid sulfate, and calcium bicarbonate; the first two tend to be distinct, but the calcium-bicarbonate type clearly grades into the sodium-chloride type. The writer concludes that, in general, all these are derived from the sodium-chloride waters as a result of physical environment or of reactions with wall rocks.

GSA Bulletin↗
USGS2003

Slip rate and earthquake recurrence along the central Septentrional fault, North American-Caribbean plate boundary, Dominican Republic

The Septentrional fault zone (SFZ) is the major North American-Caribbean, strike-slip, plate boundary fault at the longitude of eastern Hispaniola. The SFZ traverses the densely populated Cibao Valley of the Dominican Republic, forming a prominent scarp in alluvium. Our studies at four sites along the central SFZ are aimed at quantifying the late Quaternary behavior of this structure to better understand the seismic hazard it represents for the northeastern Caribbean. Our investigations of excavations at sites near Rio Cenovi show that the most recent ground-rupturing earthquake along this fault in the north central Dominican Republic occurred between A.D. 1040 and A.D. 1230, and involved a minimum of ???4 m of left-lateral slip and 2.3 m of normal dip slip at that site. Our studies of offset stream terraces at two locations, Rio Juan Lopez and Rio Licey, provide late Holocene slip rate estimates of 6-9 mm/yr and a maximum of 11-12 mm/yr, respectively, across the Septentrional fault. Combining these results gives a best estimate of 6-12 mm/yr for the slip rate across the SFZ. Three excavations, two near Tenares and one at the Rio Licey site, yielded evidence for the occurrence of earlier prehistoric earthquakes. Dates of strata associated with the penultimate event suggest that it occurred post-A.D. 30, giving a recurrence interval of 800-1200 years. These studies indicate that the SFZ has likely accumulated elastic strain sufficient to generate a major earthquake during the more than 800 years since it last slipped and should be considered likely to produce a destructive future earthquake.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

No consistent effect of plant diversity on productivity

Hector et al . (1) reported on BIODEPTH, a major international experiment on the response of plant productivity to variation in the number of plant species. They found “an overall log-linear reduction of average aboveground biomass with loss of species,” leading to what the accompanying Perspective (2) described as “a rule of thumb—that each halving of diversity leads to a 10 to 20% reduction in productivity.” These conclusions, if true, imply that the continuing high rate of plant extinction threatens the future productivity of Earth's natural and managed ecosystems and could impair their ability to produce resources essential for human survival and to regulate the concentration of atmospheric CO 2 . The three sites with proper experimental design (Portugal, Sweden, and Sheffield) all showed significant positive regressions of productivity across two or three doublings of species richness [Fig. 1; (12)]. This is the pattern expected from random selection from a set of objects with different properties (13–15), because the probability of including any specific member of the set—such as a plant species that grows rapidly or fixes nitrogen—increases with the number of objects selected. Such a pattern, found consistently in randomly assembled experimental plant communities but only rarely in natural plant communities (4, 5,13–15), has been identified as a statistical artifact of experimental design (5, 13, 14). Although one study (15) suggested that the pattern constitutes a natural mechanism by which diversity affects productivity, this requires the biologically unrealistic assumption that plant communities are randomly assembled with respect to productivity (5).

Science↗
USGS1994

U.S. Geological Survey yearbook, fiscal year 1993: At work across the Nation

The need for earth science has never been more paramount. The devastating flooding of the Mississippi River this past year, strikingly portrayed on the cover and discussed in detail in this report (p. 37-42), was a sobering reminder of nature's elemental power. As a Nation, we face many environmental and economic challenges, such as natural hazards, that can be addressed effectively only through science. Water quality, resource assessments, climate change, and toxic wastes are all critical issues that can best be dealt with when approached from a sound scientific base. The goal of the U.S. Geological Survey is to provide hydrologic, geologic, and topographic information and understanding that contribute to the wise management of the Nation's natural resources and that promote the health, safety, and well-being of all Americans. FY1993 has proven to be a particularly challenging one for the USGS. We entered into a time of transition from the long-term leadership of Director Dallas Peck and Associate Director Doyle Frederick to the appointment of a new director. We thank Dallas and Doyle for their many years of service and for their support during the transition.

Yearbook↗
USGS1994

Geologic studies in Alaska by the U.S. Geological Survey, 1993

This collection of 19 papers continues the annual series of U.S. Geological Survey reports on geologic investigations in Alaska. Contributions include 14 Articles and 5 shorter Geologic Notes that report results from all corners of the State. USGS activities in Alaska cover a broad spectrum of earth science topics, including the environment, hazards, resources, and geologic framework studies. Three articles focus on the environmental geochemistry of parts of south-central, west-central, and southwestern Alaska. An article on methane released from permafrost near Fairbanks and a note on paleowind direction indicators on the Arctic coastal plain contribute to ongoing climate and paleoclimate investigations. Landslide hazards in the Talkeetna Mountains and Wrangell-St. Elias National Park are discussed in two notes. Possible active fault traces near Alaska's main population center are described in an article on the Castle Mountain fault. An article on Aniakchak volcano presents evidence for a previously unrecognized catastrophic flooding event. Resources and resource assessment on gold, base metals, and coal are discussed in several articles and a note. Geologic framework studies cover tectonics, paleontology, stratigraphy, and metamorphic petrology. One contribution involves field methods; it evaluates the relative accuracy of global positioning systems and topographic map-based methods for deriving location data for field stations. Two bibliographies at the end of the volume list reports about Alaska in USGS publications released in 1993 and reports about Alaska by USGS authors in non-USGS publications in 1993.

Alaska↗
USGS2011

Global multi-resolution terrain elevation data 2010 (GMTED2010)

In 1996, the U.S. Geological Survey (USGS) developed a global topographic elevation model designated as GTOPO30 at a horizontal resolution of 30 arc-seconds for the entire Earth. Because no single source of topographic information covered the entire land surface, GTOPO30 was derived from eight raster and vector sources that included a substantial amount of U.S. Defense Mapping Agency data. The quality of the elevation data in GTOPO30 varies widely; there are no spatially-referenced metadata, and the major topographic features such as ridgelines and valleys are not well represented. Despite its coarse resolution and limited attributes, GTOPO30 has been widely used for a variety of hydrological, climatological, and geomorphological applications as well as military applications, where a regional, continental, or global scale topographic model is required. These applications have ranged from delineating drainage networks and watersheds to using digital elevation data for the extraction of topographic structure and three-dimensional (3D) visualization exercises (Jenson and Domingue, 1988; Verdin and Greenlee, 1996; Lehner and others, 2008). Many of the fundamental geophysical processes active at the Earth's surface are controlled or strongly influenced by topography, thus the critical need for high-quality terrain data (Gesch, 1994). U.S. Department of Defense requirements for mission planning, geographic registration of remotely sensed imagery, terrain visualization, and map production are similarly dependent on global topographic data. Since the time GTOPO30 was completed, the availability of higher-quality elevation data over large geographic areas has improved markedly. New data sources include global Digital Terrain Elevation Data (DTEDRegistered) from the Shuttle Radar Topography Mission (SRTM), Canadian elevation data, and data from the Ice, Cloud, and land Elevation Satellite (ICESat). Given the widespread use of GTOPO30 and the equivalent 30-arc-second DTEDRegistered level 0, the USGS and the National Geospatial-Intelligence Agency (NGA) have collaborated to produce an enhanced replacement for GTOPO30, the Global Land One-km Base Elevation (GLOBE) model and other comparable 30-arc-second-resolution global models, using the best available data. The new model is called the Global Multi-resolution Terrain Elevation Data 2010, or GMTED2010 for short. This suite of products at three different resolutions (approximately 1,000, 500, and 250 meters) is designed to support many applications directly by providing users with generic products (for example, maximum, minimum, and median elevations) that have been derived directly from the raw input data that would not be available to the general user or would be very costly and time-consuming to produce for individual applications. The source of all the elevation data is captured in metadata for reference purposes. It is also hoped that as better data become available in the future, the GMTED2010 model will be updated.

Open-File Report↗
USGS2012

Effects of compression direction on the plasticity and rheology of hydrolytically weakened synthetic quartz crystals at atmospheric pressure

A hydrothermally grown synthetic quartz crystal with 370±60 ppm hydroxyl impurity was cut into right rectangular prisms in eight crystallographic orientations. We compressed the prisms under constant axial force corresponding to a uniaxial stress of 140.0±0.5 MPa, and temperatures of 510° and 750°C. All but one of the samples sustained permanent axial strains of 2–3%. We established the operating slip systems from specimen shape change, slip bands and dislocation etch pits on polished surfaces, crystallographic orientation changes, stress optical features in thin sections, and transmission electron microscopy. The observed creep behavior and plasticity divided the samples into three groups: (1) Crystals compressed at 45° to [0001] and [ ] and those compressed ⊥( ) and ⊥( ) deformed principally by slip parallel to [0001]. Creep rates were relatively high and were not strongly sensitive to test temperature. Dislocation arrays approximately parallel to ( ) are common. Dislocation loops are elongate parallel to [0001], indicating that the edge segments were more mobile than the screw segments. (2) The second group of samples were loaded normal to [0001] in three orientations: ⊥( ), ⊥( ), and at 45° to ( ). These samples deformed primarily by { } 〈a〉 slip with some evidence for secondary slip on the other systems. They were more creep resistant than the first group and displayed a much higher sensitivity of creep rate to test temperature. Dislocation loops are very elongate parallel to [0001], indicating that the screw dislocation segments were much more mobile than the edge segments. (3) A sample compressed parallel to [0001] at 750°C crept at a barely detectable rate (∼10 s) and no optical scale slip features were observed. These results confirm our earlier work on one orientation each from groups 1 and 2, which indicated a strong creep anisotropy for this same crystal. This creep anisotropy parallels a remarkably similar anisotropy in the diffusivity of impurities in quartz, suggesting a causal relationship between impurity diffusion and creep associated with hydrolytic weakening. Appendix Tables A1‐A5 are available with entire article on microfiche. Order from American Geophysical Union, 2000 Florida Avenue, N.W., Washington, DC 20009. Document B84‐004; $2.50. Payment must accompany order.

Journal of Geophysical Research B: Solid Earth↗
USGS2024

Characteristics of debris-flow-prone watersheds and debris-flow-triggering rainstorms following the Tadpole Fire, New Mexico, USA

Moderate- or high-severity fires promote increases in runoff and erosion, leading to a greater likelihood of extreme geomorphic responses, including debris flows. In the first several years following fire, the majority of debris flows initiate when runoff rapidly entrains sediment on steep slopes. From a hazard perspective, it is important to be able to anticipate when and where watershed responses will be dominated by debris flows rather than flood flows. Rainfall intensity averaged over a 15 min duration, I 15 , in particular, has been identified as a key predictor of debris flow likelihood. Developing effective warning systems and predictive models for post-fire debris flow hazards therefore relies on high-temporal resolution rainfall data at the time debris flows initiate. In this study, we documented the geomorphic response of a series of watersheds following a wildfire in western New Mexico, USA, with an emphasis on constraining debris flow timing within rainstorms to better characterize debris-flow-triggering rainfall intensities. We estimated temporal changes in soil hydraulic properties and ground cover in areas burned at different severities over >2 years to offer explanations for observed differences in spatial and temporal patterns in debris flow activity. We observed 16 debris flows, all of which initiated during the first several months following the fire. The average recurrence interval of the debris-flow-triggering I 15 is 1.3 years, which highlights the susceptibility of recently burned watersheds to runoff-generated debris flows in this region. All but one of the debris flows initiated in watersheds burned primarily at moderate or high soil burn severity. Since soil hydraulic properties appeared to be relatively resilient to burning, we attribute reduced debris flow activity at later times to decreases in the fraction of bare ground. Results provide additional constraints on the rainfall characteristics that promote post-fire debris flow initiation in a region where fire size and severity have been increasing.

New Mexico↗
USGS1992

Laser-excited fluorescence of rare earth elements in fluorite: Initial observations with a laser Raman microprobe

Fluorescence emission spectra of three samples of fluorite containing 226–867 ppm total rare earth elements (REE) were excited by visible and ultraviolet wavelength lines of an argon ion laser and recorded with a Raman microprobe spectrometer system. Narrow emission lines (< 1 nm) due to 4f-4f electron transitions in individual trivalent REE (Pr, Nd, Sm, Eu?, Tb, Dy, Ho, Er, Tm) were observed in the wavelength range of 400–900 nm. Emission from individual REE occur in bands of overlapping lines in the wavelength intervals of 470–495 nm, 535–560 nm, 565–580 nm, 585–620 nm, 640–643 nm, 671.4 nm, and 758.2 nm. A broad band at 419 nm excited by the 363.8-nm ultraviolet line of the laser is due to a 4f-5 d transition in Eu 2+ . Two bands of enigmatic origin are a narrow line at 682.8 nm present at all excitation wavelengths in only one sample and a broad band at 720 nm. We have tentatively assigned individual REE to specific lines in each emission band based on selection rules for strongly and weakly allowed 4f-4f transitions and the position of absorption and emission bands documented in the literature for REE in CaF 2 and LaF 3 host crystals. Working curves of integrated peak intensity of emission from Er 3+ and Eu 2+ vs. ppm measured by ICP-MS give linear log-log fits with R 2 > 0.9 for Eu 2+ and 0.99 for Er 3+ . Detection limits for three micrometer spots are about 0.01 ppm Eu 2+ and 0.07 ppm Er 3+ . These limits are less than chondrite abundance for Eu and Er, demonstrating the potential microprobe analytical applications of laser-excited fluorescence of REE in fluorite. However, application of this technique to common rock-forming minerals may be hampered by competition between fluorescence emission and radiationless energy transfer processes involving lattice phonons.

Geochimica et Cosmochimica Acta↗
USGS2020

Methods for rapidly estimating velocity precision from GNSS time series in the presence of temporal correlation: A new method and comparison of existing methods

Time series of position estimates from Global Navigational Satellite System (GNSS) are used to measure the velocities of points on the surface of the Earth. Along with the velocity estimates, a measure of the precision is needed to assess the quality of the velocity measurement. Here, I evaluate rate uncertainties provided by four different methods that have been applied to geodetic time series. The most rigorous approach uses a data covariance that incorporates a variety of noise processes relevant to geodetic time series but is computationally demanding. Two other approaches are efficient algorithms and are used widely, but both can provide less rigorous estimates of the rate uncertainty. I propose and evaluate a fourth method, which provides estimates of rate uncertainty closer to the rigorous approach but is significantly less computationally demanding. I have evaluated all three methods against the more rigorous method using both simulations and time series from 190 GNSS sites. For data best characterized as having a flicker type noise process, one of the widely used methods overestimates the uncertainty by up to a factor of 2, while the other widely used method underestimates the uncertainty by less than a factor of 2. For a random-walk process, both methods underestimate the rate uncertainty by a factor of 3 to 5.

Journal of Geophysical Research↗
USGS2025

Landsat-derived rainfed and irrigated-area product for conterminous United States for the year 2020 (LRIP30 CONUS 2020) using supervised and unsupervised machine learning on the cloud

Accurate maps of irrigated and rainfed croplands are crucial for assessing global food and water security. Irrigated croplands yield two to four times more grain and biomass than rainfed croplands. To meet rising food demand, the proportion of cropland that is irrigated must be increased globally. Because agriculture uses 80% to 90% of global fresh water, understanding changes in cropland extent, crop type, and irrigation is critical for meeting nutritional needs sustainably. The United States has one of the most productive rainfed and irrigated croplands in the world and is a leading producer and exporter of agricultural crops. Precise maps of irrigated and rainfed croplands in the United States are crucial for assessing the current and the future agricultural production capacity in supporting food security. We developed a 30-m resolution rainfed and irrigated area map for the conterminous United States derived from 2019 to 2021 multi-date Landsat-8 data (LRIP30 CONUS 2020). A total of 96 harmonized spectral bands comprising monthly median value composites of eight bands (blue, green, red, NIR, SWIR1, SWIR2, TIR, and enhanced vegetation index [EVI]) were used. A cropland mask was then applied, and reference data were sourced from various sources. A pixel based supervised random forest classifier, and pixel based unsupervised ISODATA clustering classifier were implemented on Google Earth Engine and the ERDAS Imagine workstation to classify, identify, map, and assess accuracies of irrigated and rainfed cropland areas. The LRIP30 CONUS 2020 product achieved an overall accuracy of 93.9%. The irrigated and rainfed classes had producer's accuracies of 90.2% and 95.7%, respectively, and user's accuracies of 90.8% and 95.4%, respectively. The total net cropland area was estimated at 139.4 million hectares (Mha), of which 94.9 Mha (68%) was classified as rainfed and 44.5 Mha (32%) was classified as irrigated. State level summaries highlight regional differences and their implications for national and global food and water security.

conterminous United States↗
USGS2002

Rationale and operational plan to upgrade the U.S. gravity database

A concerted effort is underway to prepare a substantially upgraded digital gravity anomaly database for the United States and to make this data set and associated usage tools available on the internet. This joint effort, spearheaded by the geophysics groups at the National Imagery and Mapping Agency (NIMA), University of Texas at El Paso (UTEP), U.S. Geological Survey (USGS), and National Oceanic and Atmospheric Administration (NOAA), is an outgrowth of the new geoscientific community initiative called Geoinformatics (www.geoinformaticsnetwork.org). This dominantly geospatial initiative reflects the realization by Earth scientists that existing information systems and techniques are inadequate to address the many complex scientific and societal issues. Currently, inadequate standardization and chaotic distribution of geoscience data, inadequate accompanying documentation, and the lack of easy-to-use access tools and computer codes for analysis are major obstacles for scientists, government agencies, and educators. An example of the type of activities envisioned, within the context of Geoinformatics, is the construction, maintenance, and growth of a public domain gravity database and development of the software tools needed to access, implement, and expand it. This product is far more than a high quality database; it is a complete data system for a specific type of geophysical measurement that includes, for example, tools to manipulate the data and tutorials to understand and properly utilize the data. On August 9, 2002, twenty-one scientists from the federal, private and academic sectors met at a workshop to discuss the rationale for upgrading both the United States and North American gravity databases (including offshore regions) and, more importantly, to begin developing an operational plan to effectively create a new gravity data system. We encourage anyone interested in contributing data or participating in this effort to contact G.R. Keller or T.G. Hildenbrand. This workshop was the first step in building a web-based data system for sharing quality gravity data and methodology, and it builds on existing collaborative efforts. This compilation effort will result in significant additions to and major refinement of the U.S. database that is currently released publicly by NOAA’s National Geophysical Data Center and will also include an additional objective to substantially upgrade the North American database, released over 15 years ago (Committee for the Gravity Anomaly Map of North America, 1987).

Open-File Report↗
USGS2012

Effects of hydrothermal alteration on the magnetization of the Oligocene Carpenter Ridge Tuff, Bachelor Caldera, San Juan Mountains, Colorado

Intracaldera Oligocene Carpenter Ridge Tuff fills the Bachelor caldera in the central San Juan caldera complex and hosts mineral deposits of the Creede mineral district. The Carpenter Ridge Tuff and unaltered portions of its intracaldera Bachelor Mountain Member, have strong, high‐coercivity, reverse magnetizations with average magnetic susceptibility (MS) and natural remanent magnetization (NRM) of 6 × 10 −3 volume SI and 8 A/m, respectively. Oxide phenocrysts in these rocks are titanomagnetite and ilmenite; however, magnetization appears to be controlled by microcrystic titanomaghemite based on thermal demagnetization unblocking temperatures and Curie temperatures between 580°C and 620°C. Much of the intracaldera tuff was affected by potassic metasomatism, a type of hydrothermal alteration characterized by addition of K and loss of Ca and Na, between 27.3 Ma and 25.1 Ma. Potassic metasomatism resulted in the replacement of original feldspars by potassium feldspar and quartz, oxidation of the original oxide phenocrysts to hematite and rutile, and consequent suppression of MS and NRM by a factor of 5. Also present, however, are metasomatized rocks that have high magnetizations even though their original oxide phenocrysts were destroyed; values of MS and NRM are similar to those of outflow tuff. Such rocks are suspected of containing secondary magnetite on the basis of (1) Curie and thermal unblocking temperatures at and below 580°C, indicating that magnetization is carried by magnetite but that primary microcrysts of maghemite were destroyed, and (2) observation in one sample of magnetite rimming cores of hematite+rutile. The presence of secondary magnetite in metasomatized rocks requires a local shift to more reducing fluid chemistry, although we are unable to determine whether this shift occurred during potassic metasomatism or during later alteration or ore deposition. These altered rocks may record a change from a pervasive alteration by alkaline, oxidizing fluids to a vein‐controlled alteration dominated by more reduced fluids in which magnetite was stable.

Colorado↗
USGS2012

Experimental deformation of topaz crystals: Possible embrittlement by intracrystalline water

Crystallographically oriented single‐crystal prisms of gem quality topaz (composition AlSiO (OH− F) where x = 0.04 ± 0.01) were deformed at a confining pressure of 1.50 GPa, a temperature of 800°C, and a strain rate of 2×10 s. Under nearly identical conditions, all crystals of anhydrous rock‐forming minerals that have been tested to date, such as olivine, quartz, feldspars, pyroxenes, and refractory oxides, deform plastically; in contrast, our topaz crystals failed by brittle fracture regardless of the orientation of the compression direction. No optical evidence for plastic deformation was detected. Another suite of experiments with compression perpendicular to the (001) cleavage at = 100°–950°C and a strain rate of 2×10 s displayed two regimes of behavior: (1) at >400°C, fracture strength was independent of temperature, and fracture occurred on one or two surfaces parallel to {103}; (2) at <400°C, the fracture strength increased rapidly with decreasing temperature, no macroscopic stress drop was observed, and many closely spaced conjugate fractures formed on (103) and (103). The anomalous brittleness of topaz compared to anhydrous silicate and oxide crystals indicates that intracrystalline “water” plays a role in the embrittlement. We suggest that water within the topaz crystals promotes fracture in ways similar to the mechanisms of slow crack growth aided by environmental moisture.

Journal of Geophysical Research B: Solid Earth↗
USGS2023

Mapping methane reduction potential of tidal wetland restoration in the United States

Coastal wetlands can emit excess methane in cases where they are impounded and artificially freshened by structures that impede tidal exchange. We provide a new assessment of coastal methane reduction opportunities for the contiguous United States by combining multiple publicly available map layers, reassessing greenhouse gas emissions datasets, and applying scenarios informed by geospatial information system and by surveys of coastal managers. Independent accuracy assessment indicates that coastal impoundments are under-mapped at the national level by a factor of one-half. Restorations of freshwater-impounded wetlands to brackish or saline conditions have the greatest potential climate benefit of all mapped conversion opportunities, but were rarer than other potential conversion events. At the national scale we estimate potential emissions reduction for coastal wetlands to be 0.91 Teragrams of carbon dioxide equivalents year −1 , a more conservative assessment compared to previous estimates. We provide a map of 1,796 parcels with the potential for tidal re-connection.

Communications Earth & Environment↗