Search USGS⌕ Search

SEARCH · Search USGS

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2025

Peak streamflow trends in Minnesota and their relation to changes in climate, water years 1921–2020

This report chapter summarizes the effect of hydroclimatic variability of annual peak streamflow in Minnesota and is part of a larger U.S. Geological Survey multistate study to assess potential nonstationarity in annual peak streamflows across the Midwest. Spatial and temporal patterns were examined for nonstationarity in annual peak streamflow, daily mean streamflow, and modeled climatic data in four analysis periods: (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. Upward trends in annual peak streamflow were detected in northwest to southeast and north to south directions. Downward trends in annual peak streamflow were detected in northeastern and southeastern areas. Trends in peak-flow timing indicated that peak streamflows are being detected later in the water year (the period from October 1 to September 30 designated by the year in which it ends) mainly in the southern areas and earlier in the water year mainly in the northern areas. Changes in climate data point to wetter conditions in southern areas and drier conditions in northern areas. Annual precipitation was determined to be increasing in a northwest to southeast direction and in the east. In contrast, some areas in the north and northwest indicated decreasing annual precipitation. Annual snowfall was determined to be decreasing except in the extreme northeast, where annual snowfall was determined to be increasing. Decreases in annual potential evapotranspiration were detected in the south, and increases were detected in the north. Annual soil moisture increased in southern areas and decreased in northern and eastern areas. The potential spatial and temporal nonstationarity violations detected in the four analysis periods have important implications for flood-frequency analysis and point to the need for guidance on how to incorporate nonstationarities into future flood-frequency analysis in Minnesota.

Minnesota↗
USGS1953

Radiometric reconnaissance in the Garfield and Taylor park quadrangles, Chaffee and Gunnison counties, Colorado

During the summer of 1952 most of the mines and prospects in the Garfield and Taylor Park quadrangles of west-central Colorado were examined radiometrically by the U. S. Geological Survey to determine the extent, grade, and mode of occurrence of radioactive substances. The region contains a relatively large number of rock types, chiefly pre-Cambrian schists, gneisses, and granites; large and small isolated areas of sedimentary rocks of Paleozoic and Mesozoic ages; and a great succession of intrusive rocks of Tertiary age that range from andesite to granite and occur as stocks, chonoliths, sills, dikes, and one batholith. The prevailing structures are northwest-trending folds and faults. Ores valued at about $30,000,000 have been produced from this region. Silver, lead, zinc, and gold have accounted for most of this value, but small tonnages of copper, tungsten, and molybdenum have also been produced. The principal ore minerals are sphalerite, silver-bearing galena, cerussite, smithsonite, and gold-bearing pyrite and limonite; they occur chiefly as replacement bodies in limestone and as shoots in pyritic quartz veins. Anomalous radioactivity is uncommon and the four localities at which it is known are widely separated in space. The uranium content of samples from these localities is low. Brannerite, the only uranium-bearing mineral positively identified in the region, occurs sparingly in a few pegmatites and in one quartz-beryl-pyrite vein. Elsewhere radioactivity is associated with (l) black shale seams in the Manitou dolomite, (2) a quartz-pyrite-molybdenite vein, (3) a narrow border zone of oxidized material surrounding a small lead zinc ore body in the Manitou dolomite along a strong fault zone.

Colorado↗
USGS1975

Ground-water resources and geology of Jefferson County, Wisconsin

A steadily increasing population in Jefferson County, Wisconsin, is expanding the need for good-quality ground water. This need can be met by good-quality water available from the sand-and-gravel, Galena-Platteville, and sandstone aquifers. As much as 15 gallons per minute (0.95 liters per second) can be obtained from wells almost everywhere in the county. Yields of more than 1,000 gallons per minute (63 liters per second) are available from glacial drift where it contains a sufficient thickness of saturated sand and gravel. The Galena-Platteville aquifer is a dolomite that occurs mainly in the eastern one-half of the county and is locally more than 300 feet (90 meters) thick. Estimated well yields from this aquifer exceed 500 gallons per minute (32 liters per second). The sandstone aquifer underlies nearly the entire county except for small areas in the northwest corner. It is more than 1,100 feet (330 meters) thick in the southwest along the Dane-Jefferson County line. This aquifer is capable of yielding more than 1,000 gallons per minute (63 liters per second) to wells in much of the county and is the principal source of municipal water. The chemical quality of water from the three aquifers is similar. The water is very hard, having a median hardness between 315 and 325 milligrams per liter. Median values for dissolved solids range between 325 and 349 milligrams per liter. Iron and manganese commonly are present in bothersome amounts (combined total exceeding 0.3 milligrams per liter. About 13.0 million gallons per day (0.570 cubic meters per second) of ground water was pumped in the county in 1972, 87 percent from the sandstone aquifer. About 62 percent of the total water pumped was for industrial and commercial purposes, 26 percent for residential use, and 12 percent for municipal, irrigation, and institutional use.

Wisconsin↗
USGS2017

Field-trip guide to Columbia River flood basalts, associated rhyolites, and diverse post-plume volcanism in eastern Oregon

The Miocene Columbia River Basalt Group (CRBG) is the youngest and best preserved continental flood basalt province on Earth, linked in space and time with a compositionally diverse succession of volcanic rocks that partially record the apparent emergence and passage of the Yellowstone plume head through eastern Oregon during the late Cenozoic. This compositionally diverse suite of volcanic rocks are considered part of the La Grande - Owyhee eruptive axis (LOEA), an approximately 300-kilometer-long (185 mile), north - northwest - trending, middle Miocene to Pliocene volcanic belt located along the eastern margin of the Columbia River flood basalt province. Volcanic rocks erupted from and preserved within the LOEA form an important regional stratigraphic link between the (1) flood basalt - dominated Columbia Plateau on the north, (2) bimodal basalt - rhyolite vent complexes of the Owyhee Plateau on the south, (3) bimodal basalt-rhyolite and time-transgressive rhyolitic volcanic fields of the Snake River Plain - Yellowstone Plateau, and (4) the High Lava Plains of central Oregon. This field-trip guide describes a 4 - day geologic excursion that will explore the stratigraphic and geochemical relationships among mafic rocks of the Columbia River Basalt Group and coeval and compositionally diverse volcanic rocks associated with the early “Yellowstone track” and High Lava Plains in eastern Oregon. Beginning in Portland, the Day 1 log traverses the Columbia River gorge eastward to Baker City, focusing on prominent outcrops that reveal a distal succession of laterally extensive, large-volume tholeiitic flood lavas of the Grande Ronde, Wanapum, and Saddle Mountains Basalt formations of the CRBG. These “great flows” are typical of the well-studied flood basalt-dominated Columbia Plateau, where interbedded silicic and calc-alkaline lavas are conspicuously absent. The latter part of Day 1 will highlight exposures of middle to late Miocene silicic ash-flow tuffs, rhyolite domes, and calc-alkaline lava flows overlying the CRBG across the northern and central parts of the LOEA. The Day 2 field route migrates to southern parts of the LOEA, where rocks of the CRBG are associated in space and time with lesser known and more complex silicic volcanic stratigraphy associated with middle Miocene, large-volume, bimodal basalt-rhyolite vent complexes. Key stops will provide a broad overview of the structure and stratigraphy of the middle Miocene Mahogany Mountain caldera and middle to late Miocene calc-alkaline lavas of the Owyhee basalt. Stops on Day 3 will progress westward from the eastern margin of the LOEA, examining a transition linking the Columbia River Basalt-Yellowstone province with a northwestward-younging magmatic trend of silicic volcanism that underlies the High Lava Plains of eastern Oregon. Initial field stops on Day 3 will examine key outcrops demonstrating the intercalated nature of middle Miocene tholeiitic CRBG flood basalts, prominent ash-flow tuffs, and “Snake River-type” large-volume rhyolite lava flows exposed along the Malheur River. Subsequent stops on Day 3 will focus upon the volcanic stratigraphy northeast of the town of Burns, which includes regional middle to late Miocene ash-flow tuffs, and lava flows assigned to the Strawberry Volcanics. The return route to Portland on Day 4 traverses across the western axis of the Blue Mountains, highlighting exposures of the widespread, middle Miocene Dinner Creek Tuff and aspects of Picture Gorge Basalt flows and northwest-trending feeder dikes situated in the central part of the CRBG province.

Oregon↗
USGS1996

Structure, stratigraphy, and petroleum geology of the Little Plain basin, northwestern Hungary

The basement of the Little Plain (Kisalfold) basin is composed of two parts: an eastern part comprised of folded and overthrusted Triassic and Paleozoic rocks of the Pelso block (Transdanubian Central Range) compressed in the Early Cretaceous, and a western part consisting of stacked nappes of the Austroalpine zone of Paleozoic rocks, significantly metamorphosed during Cretaceous and later compression, overriding Jurassic oceanic rift-zone rocks of the Penninic zone. The evolution of the basin began in the late Karpatian-early Badenian (middle Miocene) when the eastern part of the basin began to open along conjugate sets of northeast- and northwest-trending normal faults. Neogene rocks in the study area, on the average, contain less than 0.5 wt. % total organic carbon (TOC) and, therefore, are not considered effective source rocks. Locally, however, where TOC values are as high as 3 wt. %, significant amounts of gas may have been generated and expelled. Although potential stratigraphic traps are numerous in the Neogene section, these potential traps must be downgraded because of the small amount of hydrocarbons discovered in structural traps to date. With the exception of the Cretaceous, the Mesozoic section has not been actively explored. Large anticlinal and overthrust structures involving pre-Cretaceous strata remain undrilled.

Little Plain basin↗
USGS1990

Surface-water hydrology of Honey Lake Valley, Lassen County, California, and Washoe County, Nevada

Honey Lake Valley straddles the state line of California and Nevada, about 35 miles north of Reno; about three-fourths of the area is in California. In this report, Honey Lake Valley (also referred to as the "basin") includes the entire area within the hydrographic boundary (fig. 1). Susanville, Calif., in the northwest part of the basin, is the largest town. Population is increasing rapidly both in the Susanville area and in the Reno area of adjacent Washoe County, Nev. Both Lassen and Washoe Counties have identified water resources in Honey Lake Valley as a possible source to meet their needs for future development. An important component of an assessment of the availability of additional long-term supply is an appraisal of surface-water resources. The U.S. Geological Survey, in cooperation with the California Department of Water Resources and the Nevada Division of Water Resources, began a hydrologic assessment of the area in 1987. The study was primarily an appraisal of ground-water resources, but it also included an assessment of surface-water resources. The purpose of this map report is to present the results of the surface-water assessment, including (1) a broad overview of surface-water conditions in the basin, (2) an estimate of mean annual streamflow to the valley floor, and (3) an evaluation of the characteristics of Honey Lake. This report will be republished by the U.S. Geological Survey as a Hydrologic-Investigations Atlas. Results of this study related to ground-water resources of the basin are discussed in a separate report (Handman and others, 1990) and are summarized in a short "Water Fact Sheet" by Handman (1990).

California, Nevada↗
USGS1996

Potentiometric maps and ground-water-level data for the industrial area, northwest of Delaware City, Delaware

Potentiometric maps of the water-table aquifer in the spring and fall of 1993 in the industrial area northwest of Delaware City, Delaware, are presented. The maps are based on continuously recorded ground-water-level data collected at eight wells screened in the water-table aquifer from October 15, 1993 through November 8, 1994. These data are presented on a 33" by 44" plate. The U.S. Army Corps of Engineers collected the synoptic water-level data used to construct contours of the potentiometric surface in the water-table aquifer. The U.S. Geological Survey collected the continuously recorded ground- water-level data.

Delaware↗
USGS2020

Geologic map of the Homestake Reservoir 7.5′ quadrangle, Lake, Pitkin, and Eagle Counties, Colorado

The Homestake Reservoir 7.5' quadrangle lies at the northwestern end of the Upper Arkansas Valley, and headwaters of the Arkansas River, and the Roaring Fork, Fryingpan, and Eagle Rivers of the Colorado River system. The quadrangle lies within tectonic provinces of the 1.4 giga-annum (Ga) Picuris orogeny and includes the late Paleozoic Ancestral Rockies, Late Cretaceous-Paleocene Laramide orogeny, Oligocene-to-Miocene and Pliocene? volcanism, and Miocene to the present Rio Grande rift extensional tectonics. In the eastern half of the quadrangle, high-angle, east-dipping, Neogene normal faults displace Proterozoic rocks, and locally Miocene-to-Pliocene? volcanic rocks. Many quartz veins and hydrothermally altered zones are exposed along the eastern flank of the quadrangle, indicative of the multiple tectonic episodes the region has experienced. The main intent of the map is to unravel the structural complexity by partitioning the structures and volcanism within the appropriate geologic interval. This ultimately permits accurate identification of geomorphic features suitable for chronologies related to landscape evolution studies, seismic and other natural hazard identification, ground and surface water modeling, and paleoclimatic studies. Within the western half of the quadrangle, Mesoproterozoic and Paleoproterozoic igneous and metamorphic rocks of 1.4 Ga St. Kevin Granite and 1.8–1.7 Ga Biotite gneiss and schist, respectively, are uplifted along the generally east-dipping, high-angle Sawatch fault system. In the northwest portion of the quadrangle, strands of the Homestake shear zone have been mapped, dated and assigned to the 1.4 Ga Picuris orogeny of northern New Mexico. 10 Be and 26 Al cosmogenic nuclide ages of the youngest glacial deposits indicate a last glacial maximum age of about 22–21 kilo-annum (ka) and complete deglaciation by about 14 kilo-annum, supported by chronologic studies in adjacent drainages. The Turquoise Lake impounding lateral and terminal moraine complex was deposited during late Pleistocene glacial maximum ~22–21 ka. No late Pleistocene tectonic activity is apparent within the quadrangle.

Colorado↗
USGS2017

Active tectonics of the northern Mojave Desert: The 2017 Desert Symposium field trip road log

The 2017 Desert Symposium field trip will highlight recent work by the U.S. Geological Survey geologists and geophysicists, who have been mapping young sediment and geomorphology associated with active tectonic features in the least well-known part of the eastern California Shear Zone (ECSZ). This area, stretching from Barstow eastward in a giant arc to end near the Granite Mountains on the south and the Avawatz Mountains on the north (Fig. 1-1), encompasses the two major structural components of the ECSZ—east-striking sinistral faults and northwest-striking dextral faults—as well as reverseoblique and normal-oblique faults that are associated with topographic highs and sags, respectively. In addition, folds and stepovers (both restraining stepovers that form pop-up structures and releasing stepovers that create narrow basins) have been identified. The ECSZ is a segment in the ‘soft’ distributed deformation of the North American plate east of the San Andreas fault (Fig. 1-1), where it takes up approximately 20-25% of plate motion in a broad zone of right-lateral shear (Sauber et al., 1994) The ECSZ (sensu strictu) begins in the Joshua Tree area and passes north through the Mojave Desert, past the Owens Valley-to-Death Valley swath and northward, where it is termed the Walker Lane. It has been defined as the locus of active faulting (Dokka and Travis, 1990), but when the full history from about 10 Ma forward is considered, it lies in a broader zone of right shear that passes westward in the Mojave Desert to the San Andreas fault (Mojave strike-slip province of Miller and Yount, 2002) and passes eastward to the Nevada state line or beyond (Miller, this volume). We will visit several accessible highlights for newly studied faults, signs of young deformation, and packages of syntectonic sediments. These pieces of a complex active tectonic puzzle have yielded some answers to longstanding questions such as: How is fault slip transfer in this area accommodated between northwest-striking dextral faults and eaststriking sinistral faults? How is active deformation on the Ludlow fault transferred northward, presumably to connect to the southern Death Valley fault zone? When were faults in this area of the central Mojave Desert initiated? Are faults in this area more or less active than faults in the ECSZ to the west? What is the role of NNW-striking faults and when did they form? How has fault slip changed over time? Locations and fault names are provided in figure 1-2. Important turns and locations are identified with locations in the projection: UTM, zone 11; datum NAD 83: (578530 3917335).

California↗
USGS2007

Geologic Map of the Goleta Quadrangle, Santa Barbara County, California

This map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying those parts of the Santa Barbara coastal plain and adjacent southern flank of the Santa Ynez Mountains within the Goleta 7 ?? quadrangle at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. The Goleta map overlaps an earlier preliminary geologic map of the central part of the coastal plain (Minor and others, 2002) that provided coverage within the coastal, central parts of the Goleta and contiguous Santa Barbara quadrangles. In addition to new mapping in the northern part of the Goleta quadrangle, geologic mapping in other parts of the map area has been revised from the preliminary map compilation based on new structural interpretations supplemented by new biostratigraphic data. All surficial and bedrock map units are described in detail in the accompanying map pamphlet. Abundant biostratigraphic and biochronologic data based on microfossil identifications are presented in expanded unit descriptions of the marine Neogene Monterey and Sisquoc Formations. Site-specific fault-kinematic observations (including slip-sense determinations) are embedded in the digital map database. The Goleta quadrangle is located in the western Transverse Ranges physiographic province along an east-west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The Santa Barbara coastal plain surface, which spans the central part of the quadrangle, includes several mesas and hills that are geomorphic expressions of underlying, potentially active folds and partly buried oblique and reverse faults of the Santa Barbara fold and fault belt (SBFFB). Strong earthquakes have occurred offshore within 10 km of the Santa Barbara coastal plain in 1925 (6.3 magnitude), 1941 (5.5 magnitude) and 1978 (5.1 magnitude). These and numerous smaller seismic events located beneath and offshore of the coastal plain, likely occurred on reverse-oblique-slip faults that are similar to, or continuous with, Quaternary reverse faults crossing the coastal plain. Thus, faults of the SBFFB pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. In addition, numerous Quaternary landslide deposits along the steep southern flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements in developed areas. Folded, faulted, and fractured sedimentary rocks in the subsurface of the coastal plain and adjacent Santa Barbara Channel are sources and form reservoirs for economic deposits of oil and gas, some of which are currently being extracted offshore. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and interpretation of these and other geologic hazards and resources in the Goleta region.

Open-File Report↗
USGS2005

Geology of the Vienna Mineralized Area, Blaine and Camas Counties, Idaho

The Vienna mineralized area of south-central Idaho was an important silver-lead-producing district in the late 1800s and has intermittently produced lead, silver, zinc, copper, and gold since that time. The district is underlain by biotite granodiorite of the Cretaceous Idaho batholith, and all mineral deposits are hosted by the biotite granodiorite. The granodiorite intrudes Paleozoic sedimentary rocks of the Sun Valley Group, is overlain by rocks of the Eocene Challis Volcanic Group, and is cut by numerous northeast-trending Eocene faults and dikes. Two mineralogically and texturally distinct vein types are present in a northwest- and east-trending conjugate shear-zone system. The shear zones postdate granodiorite emplacement and joint formation, but predate Eocene fault and dike formation. Ribbon veins consist of alternating bands of massive vein quartz and silver-sulfide (proustite and pyrargyrite) mineral stringers. The ribbon veins were sheared and brecciated during multiple phases of injection of mineralizing fluids. A quartz-sericite-pyrite-galena vein system was subsequently emplaced in the brecciated shear zones. Both vein systems are believed to be the product of mesothermal, multiphase mineralization. K-Ar dating of shear-zone sericite indicates that sericitization occurred at 80.7?2.8 Ma; thus mineralization in the Vienna mineralized area probably is Late Cretaceous in age.

Bulletin↗
USGS1972

Geology of the Konakpinar--Sarica area, Sivas Province, Turkey

The junction of several major structures and stratigraphic sequences is in the Konakpinar-Sarica area of central Turkey. Most of the area is underlain by Upper Jurassic to Cretaceous limeston and siltstone, early Tertiary sedimentary rock, and remnants of younger volcanic rocks and lacustrine deposits. The northeastern part of the area, however, is formed of serpentinite, of possible Cretaceous age, unconformably overlain by Upper Cretaceous conglomerate and siltstone that crop out extensively east of the area. The regional structure changes direction in the area. Folds and faults change across a northerly striking hinge line from northeast trends on the west to northwest trends on the east. A north-trending regional fault zone is a little east of the hinge line. The northern part of this fault zone and a northwest-striking fault, a possible thrust, east of it form the boundary between the two stratigraphic provinces. The area northeast of this boundary is cut by a series of vertical northwest-trending faults that are downdropped on the southwest. A large northeast-trending fault that is part of a broad fault zone that extends from the Mediterranean Sea northeastward to Divrigi is in the northwest corner of the area. Some thrust faults cut the Cretaceous rocks in the western part of the area; the Upper Jurassic limestone may be allochthonous. The only economic deposit known in the area is at the Otlukilise Iron Mine where iron is present in a sedimentary filling of sinkholesand as secondary replacement deposits in limestone at their borders. Minor deposits of chrome, copper, and coal also occur in the area.

Open-File Report↗
USGS1974

Economic geology of the Isla de Mona Quadrangle, Puerto Rico

Limiting this tableland In the northern part of Isla de Mona are sheer sea cliffs chiefly exposing the Isla de Mona Dolomite. Around the southern part of the island are Irregular cliffs and steep slopes that chiefly expose the Lirio Limestone. The structure of Isla de Mona consists of two gentle complex folds a broad anticline that trends and plunges gently south-southeast through the central and western parts of Isla de Mona, and a parallel syncline through-the eastern part of the Island that also has a chiefly south-southeast plunge. A near-vertical fault that strikes northwest, then north from the central part to the north coast of Isla de Mona displaces bedrock of the eastern block downward about 10 m. Many caves, including one cave system more than 100,000 m2 in total area, are localized in the lower 10 m of the Lirio Limestone, adjacent to the cliffs peripheral to the upland surface, and numerous small caves occur higher in the Lirio. A few small caves also are found In the Isla de Mona Dolomite. However, the total floor area of all caves on Isla de Mona probably is less than 1 percent of the area of the Island. Almost all caves on Isla de Mona contain phosphorite, which was mined extensively during the late 19th and early 20th centuries. Phosphorite accumulation locally may have exceeded 3.5 m in thickness, but probably averaged less than 1.5 m thick. A fair estimate of original reserves of phosphorite in 12 surveyed caves is about 151,000 m3 of which about 125,500 m3 probably has been removed in mining. Original reserves in the entire island are estimated to have been in the range 158,000 to 235,500 m3. Converted to metric tons, remaining reserves of cave phosphorite probably are considerably less than 50,000. The very pure limestone and calcitic dolomite that form the bedrock of Isla de Mona are abundant industrial-mineral resources. In addition, these carbonate rocks and the beach deposits are sources of construction materials for some classes of engineering works. The structure of Isla de Mona suggests some possibility of favorable zones for accumulation of oil and gas, but no source rocks are known, and there are no confirmed reports of oil and gas from any nearby area. Known supplies of fresh water on Isla de Mona are very small, but wells dug in coastal lowlands or drilled In the upland surface might yield moderate quantities of groundwater.

Open-File Report↗
USGS2020

Porphyry copper potential of the U.S. Southern Basin and Range using ASTER data integrated with geochemical and geologic datasets to assess potential near-surface deposits in well-explored permissive tracts

ArcGIS was used to spatially assess and rank potential porphyry copper deposits using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data together with geochemical and geologic datasets in order to estimate undiscovered deposits in the southern Basin and Range Province in the southwestern United States. The assessment was done using a traditional expert opinion three-part method and a prospectivity model developed using weights of evidence and logistic regression techniques to determine if ASTER data integrated with other geologic datasets can be used to find additional areas of prospectivity in well-explored permissive tracts. ASTER hydrothermal alteration data were expressed as 457 alteration polygons defined from a low-pass filtered alteration density map of combined argillic, phyllic, and propylitic rock units. Sediment stream samples were plotted as map grid data and used as spatial information in ASTER polygons. Gravity and magnetic data were also used to define basins greater than 1 km in depth. Each ASTER alteration polygon was ranked for porphyry copper potential using alteration types, spatial amounts of alteration, stream sediment geochemistry, lithology, polygon shape, proximity to other alteration polygons, and deposit and prospects data. Permissive tracts defined for the assessment in the southern Basin and Range Province include the Laramide Northwest, Laramide Southeast, Jurassic, and Tertiary tracts. Expert opinion estimates using the three-part assessment method resulted in a mean estimate of 17 undiscovered porphyry copper deposits, whereas the prospectivity modeling predicted a mean estimate of nine undiscovered deposits. In the well-explored Laramide Southeast tract, which contains the most deposits and has been explored for over 100 years, an average of 4.3 undiscovered deposits was estimated using ASTER alteration polygon data versus 2.8 undiscovered deposits without ASTER data. The Tertiary tract, which contains the largest number of ASTER alteration polygons not associated with known Tertiary deposits, was predicted to contain the most undiscovered resources in the southern Basin and Range Province.

Economic Geology↗
USGS2016

Methods for estimating selected spring and fall low-flow frequency statistics for ungaged stream sites in Iowa, based on data through June 2014

A statewide study was led to develop regression equations for estimating three selected spring and three selected fall low-flow frequency statistics for ungaged stream sites in Iowa. The estimation equations developed for the six low-flow frequency statistics include spring (April through June) 1-, 7-, and 30-day mean low flows for a recurrence interval of 10 years and fall (October through December) 1-, 7-, and 30-day mean low flows for a recurrence interval of 10 years. Estimates of the three selected spring statistics are provided for 241 U.S. Geological Survey continuous-record streamgages, and estimates of the three selected fall statistics are provided for 238 of these streamgages, using data through June 2014. Because only 9 years of fall streamflow record were available, three streamgages included in the development of the spring regression equations were not included in the development of the fall regression equations. Because of regulation, diversion, or urbanization, 30 of the 241 streamgages were not included in the development of the regression equations. The study area includes Iowa and adjacent areas within 50 miles of the Iowa border. Because trend analyses indicated statistically significant positive trends when considering the period of record for most of the streamgages, the longest, most recent period of record without a significant trend was determined for each streamgage for use in the study. Geographic information system software was used to measure 63 selected basin characteristics for each of the 211streamgages used to develop the regional regression equations. The study area was divided into three low-flow regions that were defined in a previous study for the development of regional regression equations. Because several streamgages included in the development of regional regression equations have estimates of zero flow calculated from observed streamflow for selected spring and fall low-flow frequency statistics, the final equations for the three low-flow regions were developed using two types of regression analyses—left-censored and generalized-least-squares regression analyses. A total of 211 streamgages were included in the development of nine spring regression equations—three equations for each of the three low-flow regions. A total of 208 streamgages were included in the development of nine fall regression equations—three equations for each of the three low-flow regions. A censoring threshold was used to develop 15 left-censored regression equations to estimate the three fall low-flow frequency statistics for each of the three low-flow regions and to estimate the three spring low-flow frequency statistics for the southern and northwest regions. For the northeast region, generalized-least-squares regression was used to develop three equations to estimate the three spring low-flow frequency statistics. For the northeast region, average standard errors of prediction range from 32.4 to 48.4 percent for the spring equations and average standard errors of estimate range from 56.4 to 73.8 percent for the fall equations. For the northwest region, average standard errors of estimate range from 58.9 to 62.1 percent for the spring equations and from 83.2 to 109.4 percent for the fall equations. For the southern region, average standard errors of estimate range from 43.2 to 64.0 percent for the spring equations and from 78.1 to 78.7 percent for the fall equations. The regression equations are applicable only to stream sites in Iowa with low flows not substantially affected by regulation, diversion, or urbanization and with basin characteristics within the range of those used to develop the equations. The regression equations will be implemented within the U.S. Geological Survey StreamStats Web-based geographic information system application. StreamStats allows users to click on any ungaged stream site and compute estimates of the six selected spring and fall low-flow statistics; in addition, 90-percent prediction intervals and the measured basin characteristics for the ungaged site are provided. StreamStats also allows users to click on any Iowa streamgage to obtain computed estimates for the six selected spring and fall low-flow statistics.

Iowa↗
USGS2016

A rare Uroglena bloom in Beaver Lake, Arkansas, spring 2015

A combination of factors triggered a Uroglena volvox bloom and taste and odor event in Beaver Lake, a water-supply reservoir in northwest Arkansas, in late April 2015. Factors contributing to the bloom included increased rainfall and runoff containing increased concentrations of dissolved organic carbon, followed by a stable pool, low nutrient concentrations, and an expansion of lake surface area and littoral zone. This was the first time U. volvox was identified in Beaver Lake and the first time it was recognized as a source of taste and odor. Routine water quality samples happened to be collected by the US Geological Survey and the Beaver Water District throughout the reservoir during the bloom—. Higher than normal rainfall in March 2015 increased the pool elevation in Beaver Lake by 2.3 m (by early April), increased the surface area by 10%, and increased the littoral zone by 1214 ha; these conditions persisted for 38 days, resulting from flood water being retained behind the dam. Monitoring programs that cover a wide range of reservoir features, including dissolved organic carbon, zooplankton, and phytoplankton, are valuable in explaining unusual events such as this Uroglena bloom.

Arkansas↗
USGS2009

Deep Resistivity Structure of Mid Valley, Nevada Test Site, Nevada

The U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) at their Nevada Site Office (NSO) are addressing ground-water contamination resulting from historical underground nuclear testing through the Environmental Management (EM) program and, in particular, the Underground Test Area (UGTA) project. From 1951 to 1992, 828 underground nuclear tests were conducted at the Nevada Test Site northwest of Las Vegas (DOE UGTA, 2003). Most of these tests were conducted hundreds of feet above the ground-water table; however, more than 200 of the tests were near, or within, the water table. This underground testing was limited to specific areas of the Nevada Test Site including Pahute Mesa, Rainier Mesa/Shoshone Mountain (RM-SM), Frenchman Flat, and Yucca Flat. One issue of concern is the nature of the somewhat poorly constrained pre-Tertiary geology and its effects on ground-water flow in the area subsequent to a nuclear test. Ground-water modelers would like to know more about the hydrostratigraphy and geologic structure to support a hydrostratigraphic framework model that is under development for the Rainier Mesa/Shoshone Mountain (RM-SM) Corrective Action Unit (CAU) (National Security Technologies, 2007). During 2003, the U.S. Geological Survey (USGS), in cooperation with the DOE and NNSA-NSO collected and processed data at the Nevada Test Site in and near Yucca Flat (YF) to help define the character, thickness, and lateral extent of the pre-Tertiary confining units. We collected 51 magnetotelluric (MT) and audio-magnetotelluric (AMT) stations for that research (Williams and others, 2005a, 2005b, 2005c, 2005d, 2005e, and 2005f). In early 2005 we extended that research with 26 additional MT data stations (Williams and others, 2006) located on and near Rainier Mesa and Shoshone Mountain (RM-SM). The new stations extended the area of the hydrogeologic study previously conducted in Yucca Flat, further refining what is known about the pre-Tertiary confining units. In particular, a major goal was to define the extent of the upper clastic confining unit (UCCU). The UCCU is composed of late Devonian to Mississippian siliciclastic rocks assigned to the Eleana Formation and Chainman Shale (National Security Technologies, 2007). The UCCU underlies the Yucca Flat area and extends southwestward toward Shoshone Mountain, westward toward Buckboard Mesa, and northwestward toward Rainier Mesa. Late in 2005 we collected data at an additional 14 MT stations in Mid Valley, CP Hills, and northern Yucca Flat. That work was done to better determine the extent and thickness of the UCCU near the boundary between the southeastern RM-SM CAU and the southwestern YF CAU, and also in the northern YF CAU. The MT data have been released in a separate U.S. Geological Survey report (Williams and others, 2007). The Nevada Test Site magnetotelluric data interpretation presented in this report includes the results of detailed two-dimensional (2-D) resistivity modeling for each profile and inferences on the three-dimensional (3-D) character of the geology within the region.

Nevada↗
USGS1982

Geologic map of the Redwood Creek drainage basin, Humboldt County, California

A 1:62,500-scale geologic map with 14 rock stratigraphic units and an accompanying explanatory text are used to describe the geology of the Redwood Creek drainage basin of northwestern California. A large part of Redwood National Park is located in the downstream part of this actively eroding drainage basin. The bedrock consists primarily of Mesozoic sedimentary and metamorphic rocks. The structurally complex Franciscan assemblage of rocks underlies most of the basin, but rocks of the Klammath Mountain tectonic province occurs in a small eastern part of the basin. Most major boundaries between Mesozoic rock units are north-northwest trending faults parallel to the regional structural trend. Extensive areas of surficial coastal plain sediments, landslide deposits, stream terrace deposits and modern alluvium are also present; these areas help identify loci of vigorous recent erosion. (USGS)

California↗