SEARCH · Search USGS

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources

USGS1990

Development of slope valleys in the glacimarine environment of a complex subduction zone, Northern Gulf of Alaska

Morphological, seismic-reflection, and sedimentological evidence indicates that glacial ice tongues cut large sea valleys into the Gulf of Alaska continental shelf during the Pleistocene. During the Holocene, glacially-derived sediments from the Copper River and other meltwater streams have been prograding seaward across the shelf, covering the glacial and glacimarine upper Yakataga diamicts that blanketed the shelf and accumulated on the upper slope seaward of the sea valleys during the Pleistocene. GLORIA imagery near Middleton Island provides a new perspective on the glacimarine depositional environment on the continental slope in a collision zone between the Pacific and North American plates. Southwest of Middleton Island, along the subduction margin, sinuous valleys funnel sediment around shelf-edge-parallel, subduction-created, anticlinal ridges that have deflected and locally trapped glacimarine sediment. The slope south and southeast of Middleton Island where oblique convergence occurs, is incised by dendritic, erosional gulley systems, contains no compressional ridges, and thus, the apparently active sediment pathways to the trench are unrestricted. However, below the sea valley mouths, apparently both glacial and glacimarine sediments blanket the upper slope, covering any dendritic gulley systems that may have formed during or since the Pleistocene low stands of sea level.

Alaska↗

USGS1985

The role of erosion by fish in shaping topography around Hudson submarine canyon.

An 800-km 2 area of rough topography around the head of Hudson Canyon off the eastern United States is attributed to erosion by tilefish ( Lopholatilus chamaeleonticeps ) and associated species of crustaceans. The rough topography has a relief of 1-10 m, occurs in water depths of 120-500 m, and has been cut into a semilithified, silty clay substrate since the onset of the Holocene transgression. Commercial fishing activity indicates that a large population of tilefish, which dig burrows in the sea floor, occupy the area of the rough topography. Average tilefish burrows are 1.6 m in diameter and 1.7 m in depth. They have a clustered, not uniform, distribution, and their average density is 2,500 per km 2 . The close match of areas of rough topography and high tilefish populations, the active burrowing of the sea floor, and the clustered distribution of the burrows suggest that the hummocky topography in this area may be the result of continuous erosion by tilefish and associated crustaceans during the Holocene. An erosion rate of 13 cm per 1,000 years is necessary to create this topography during the past 13,000 years--and 18 cm per 1,000 years if(as is more likely based on the depths at which tilefish presently are found) the erosion started 9,000 years ago.

New York↗

USGS1977

Pleistocene barrier bar seaward of ooid shoal complex near Miami, Florida

An ooid sand barrier bar of Pleistocene age was deposited along the seaward side of an ooid shoal complex southwest of Miami, Florida. The bar is 35 km long, about 0.8 km wide, elongate parallel with the trend of the ooid shoal complex and perpendicular to channels between individual shoals. A depression 1.6 km wide, interpreted as a back-barrier channel, isolates the bar from the ooid shoals. During sea-level fall and subaerial exposure of the bar, the ooid sand was cemented in place, preventing migration of the barrier. No Holocene analogue of this sand body is recognized, perhaps because of the relative youthfulness of Holocene ooid shoals. This Pleistocene ooid shoal complex, with its reservoir-size barrier bar, may serve as a refined model for exploration in ancient ooid sand belts.

Florida↗

USGS1991

High-energy carbonate-sand accumulation, the Quicksands, southwest Florida Keys

High-resolution seismic-reflection profiles of the Quicksands, located along a broad ridge on the platform shelf west of Key West, Florida, indicate a significant deposit of non-oolitic carbonate sand occurs in a belt 47 km long by 28 km wide. The surface of the belt is ornamented by large (5 m), migrating tidal bars, oriented in a north-south direction, on which sand waves, oriented in an east-west direction, are superimposed. Some of the sand waves are awash at low tide. The sand waves are formed by strong reversing tidal currents flowing between the Gulf of Mexico and the Straits of Florida. The waves migrate directly over Pleistocene bedrock to the east, but the deposit thickens to the west and sand waves there overlie non-oolitic Holocene accumulations as thick as 12 m. Westward-dipping accretionary bedding indicates that net migration of the sands is to the west, despite north-south movement of tidal currents. The westward edge of the accumulation has accreted over deeper, muddier deposits. Although tidal currents and resultant bedforms appear identical to those of active ooid deposits in the Bahamas and elsewhere, no oolitically coated grains were found in this study. Thin-section analyses show the principal component (average 48%) of the sands is fragmented plates of species of the green alga Halimeda , followed by particulate coral (average 17%), which increases off the flanks of the main sand body. Short vibracores confirm the presence of cross-bedding.

Florida↗

USGS1997

Complex response of a midcontinent north America drainage system to late Wisconsinan sedimentation

The geomorphic evolution of Mud Creek basin in eastern Iowa, U.S.A. serves to illustrate how geomorphic influences such as sediment supply, valley gradient, climate, and vegetation are recorded in the alluvial stratigraphic record. Sediment supply to the fluvial system increased significantly during the late Wisconsinan through a combination of periglacial erosion and loess accumulation. Subsequent evolution of the Holocene alluvial stratigraphic record reflects long-term routing of the late Wisconsinan sediment through the drainage basin in a series of cut-and-fill cycles whose timing was influenced by hydrologic response to change in climate and vegetation. When viewed in a regional context, the alluvial stratigraphic record appears to reflect a long-term complex response of the fluvial system to increased sediment supply during the late Wisconsinan. Hydrologic and sediment-supply changes accompanying the spread of Euroamerican agriculture to the basin in the 1800s dramatically upset trends in sedimentation and channel behavior established during the Holocene.

Journal of Sedimentary Research↗

USGS2011

Comparative phylogeography of a coevolved community: Concerted population expansions in Joshua trees and four Yucca moths

Comparative phylogeographic studies have had mixed success in identifying common phylogeographic patterns among co-distributed organisms. Whereas some have found broadly similar patterns across a diverse array of taxa, others have found that the histories of different species are more idiosyncratic than congruent. The variation in the results of comparative phylogeographic studies could indicate that the extent to which sympatrically-distributed organisms share common biogeographic histories varies depending on the strength and specificity of ecological interactions between them. To test this hypothesis, we examined demographic and phylogeographic patterns in a highly specialized, coevolved community - Joshua trees (Yucca brevifolia) and their associated yucca moths. This tightly-integrated, mutually interdependent community is known to have experienced significant range changes at the end of the last glacial period, so there is a strong a priori expectation that these organisms will show common signatures of demographic and distributional changes over time. Using a database of >5000 GPS records for Joshua trees, and multi-locus DNA sequence data from the Joshua tree and four species of yucca moth, we combined paleaodistribution modeling with coalescent-based analyses of demographic and phylgeographic history. We extensively evaluated the power of our methods to infer past population size and distributional changes by evaluating the effect of different inference procedures on our results, comparing our palaeodistribution models to Pleistocene-aged packrat midden records, and simulating DNA sequence data under a variety of alternative demographic histories. Together the results indicate that these organisms have shared a common history of population expansion, and that these expansions were broadly coincident in time. However, contrary to our expectations, none of our analyses indicated significant range or population size reductions at the end of the last glacial period, and the inferred demographic changes substantially predate Holocene climate changes.

PLoS ONE↗

USGS2013

Summit crater lake observations, and the location, chemistry, and pH of water samples near Mount Chiginagak volcano, Alaska: 2004-2012

Mount Chiginagak is a hydrothermally active volcano on the Alaska Peninsula, approximately 170 km south–southwest of King Salmon, Alaska (fig. 1). This small stratovolcano, approximately 8 km in diameter, has erupted through Tertiary to Permian sedimentary and igneous rocks (Detterman and others, 1987). The highest peak is at an elevation of 2,135 m, and the upper ~1,000 m of the volcano are covered with snow and ice. Holocene activity consists of debris avalanches, lahars, and lava flows. Pleistocene pyroclastic flows and block-and-ash flows, interlayered with andesitic lava flows, dominate the edifice rocks on the northern and western flanks. Historical reports of activity are limited and generally describe “steaming” and “smoking” (Coats, 1950; Powers, 1958). Proximal tephra collected during recent fieldwork suggests there may have been limited Holocene explosive activity that resulted in localized ash fall. A cluster of fumaroles on the north flank, at an elevation of ~1,750 m, commonly referred to as the “north flank fumarole” have been emitting gas throughout historical time (location shown in fig. 2). The only other thermal feature at the volcano is the Mother Goose hot springs located at the base of the edifice on the northwestern flank in upper Volcano Creek, at an elevation of ~160 m (fig. 2, near sites H1, H3, and H4). Sometime between November 2004 and May 2005, a ~400-m-wide, 100-m-deep lake developed in the snow- and ice-filled summit crater of the volcano (Schaefer and others, 2008). In early May 2005, an estimated 3 million cubic meters (3×106 m3) of sulfurous, clay-rich debris and acidic water exited the crater through tunnels at the base of a glacier that breaches the south crater rim. More than 27 km downstream, these acidic flood waters reached approximately 1.3 m above normal water levels and inundated a fertile, salmon-spawning drainage, acidifying the entire water column of Mother Goose Lake from its surface waters to its maximum depth of 45 m (resulting pH ~2.9), and preventing the annual salmon run in the King Salmon River. A simultaneous release of gas and acidic aerosols from the crater caused widespread vegetation damage along the flow path. Since 2005, we have been monitoring the crater lake water that continues to flow into Mother Goose Lake by collecting surface water samples for major cation and anion analysis, measuring surface-water pH of affected drainages, and photo-documenting the condition of the summit crater lake. This report describes water sampling locations, provides a table of chemistry and pH measurements, and documents the condition of the summit crater between 2004 and 2011. In September 2013, the report was updated with results of water-chemistry samples collected in 2011 and 2012, which were added as an addendum.

Alaska↗

USGS2017

Geology of Kasatochi Volcano, Aleutian Islands, Alaska

Kasatochi is a small, isolated island volcano in the center of the Aleutian Island chain. It consists of a roughly circular cone ~3 km in diameter with a lake-filled central crater that is 1.2 km in diameter and extends from the highest point on the island to sea level. The earliest unit recognized is a thick series of mid-Pleistocene glaciovolcanic deposits consisting of autobrecciated lava, lahars, and volumetrically minor lava masses that we believe to have been emplaced underneath a regional ice cap. This unit is unconformably overlain by several massive Holocene lavas, above which lies a thick sequence of latest- Holocene pyroclastic deposits likely deposited during the crater-forming eruption. The 2008 eruption enlarged the preexisting crater, and produced pyroclastic density currents, surges, and fall that blanketed the entire island except for steep, seaward-facing cliffs on the flanks and the crater wall. 2008 deposits initially extended the shoreline seaward by up to 500 m. Kasatochi lava and scoria are porphyritic basalt, basaltic andesite, and andesite, all of which bear trace-element evidence for prolonged crustal residence and equilibration with an amphibole-rich gabbroic residue. Lavas from individual effusive eruptions have limited compositional range, whereas juvenile scoriae from explosive eruptions span the majority of the compositional range of the entire volcano. 2008 pyroclastic deposits contain texturally diverse amphibole gabbro clasts and smaller, less abundant, plagioclase-free pyroxenitic and peridotitic cumulate inclusions. We infer that the gabbroic inclusions are from the margins of regions of crustal magma storage and evolution and that equilibration with the amphibole plays an important role in the evolution of mafic and intermediate magmas.

Alaska↗

USGS2005

Neotectonics of the offshore Oak Ridge fault near Ventura, southern California

The Oak Ridge fault is a large-offset, south-dipping reverse fault that forms the south boundary of the Ventura Basin in southern California. Previous research indicates that the Oak Ridge fault south of the town of Ventura has been inactive since 200-400 ka ago and that the fault tip is buried by ??? 1 km of Quaternary sediment. However, very high-resolution and medium-resolution seismic reflection data presented here show a south-dipping fault, on strike with the Oak Ridge fault, that is truncated at 80 m depth by an unconformity that is probably at the base of late Pleistocene and Holocene sediment. Furthermore, if vertically aligned features in seismic reflection data are eroded remnants of fault scarps, then a subsidiary fault within the Oak Ridge system deforms the shallowest imaged sediment layers. We propose that this subsidiary fault has mainly left-slip offset. These observations of Holocene slip on the Oak Ridge fault system suggest that revision of the earthquake hazard for the densely populated Santa Clara River valley and the Oxnard coastal plain may be needed.

Bulletin of the Seismological Society of America↗

USGS2005

Recent deformation along the offshore Malibu Coast, Dume, and related faults west of Point Dume, southern California

Offshore faults west of Point Dume, southern California, are part of an important regional fault system that extends for about 206 km, from near the city of Los Angeles westward along the south flank of the Santa Monica Mountains and through the northern Channel Islands. This boundary fault system separates the western Transverse Ranges, on the north, from the California Continental Borderland, on the south. Previous research showed that the fault system includes many active fault strands; consequently, the entire system is considered a serious potential earthquake hazard to nearby Los Angeles. We present an integrated analysis of multichannel seismic- and high-resolution seismic-reflection data and multibeam-bathymetric information to focus on the central part of the fault system that lies west of Point Dume. We show that some of the main offshore faults have cumulative displacements of 3-5 km, and many faults are currently active because they deform the seafloor or very shallow sediment layers. The main offshore fault is the Dume fault, a large north-dipping reverse fault. In the eastern part of the study area, this fault offsets the seafloor, showing Holocene displacement. Onshore, the Malibu Coast fault dips steeply north, is active, and shows left-oblique slip. The probable offshore extension of this fault is a large fault that dips steeply in its upper part but flattens at depth. High-resolution seismic data show that this fault deforms shallow sediment making up the Hueneme fan complex, indicating Holocene activity. A structure near Sycamore knoll strikes transversely to the main faults and could be important to the analysis of the regional earthquake hazard because the structure might form a boundary between earthquake-rupture segments.

Bulletin of the Seismological Society of America↗

USGS2013

Low footwall accelerations and variable surface rupture behavior on the Fort Sage Mountains fault, northeast California

The Fort Sage Mountains fault zone is a normal fault in the Walker Lane of the western Basin and Range that produced a small surface rupture (<20 cm) during an M L 5.6 earthquake in 1950. We investigate the paleoseismic history of the Fort Sage fault and find evidence for two paleoearthquakes with surface displacements much larger than those observed in 1950. Rupture of the Fort Sage fault ∼5.6 ka resulted in surface displacements of at least 0.8–1.5 m, implying earthquake moment magnitudes (M w ) of 6.7–7.1. An older rupture at ∼20.5 ka displaced the ground at least 1.5 m, implying an earthquake of M w 6.8–7.1. A field of precariously balanced rocks (PBRs) is located less than 1 km from the surface‐rupture trace of this Holocene‐active normal fault. Ground‐motion prediction equations (GMPEs) predict peak ground accelerations (PGAs) of 0.2–0.3g for the 1950 rupture and 0.3–0.5g for the ∼5.6 ka paleoearthquake one kilometer from the fault‐surface trace, yet field tests indicate that the Fort Sage PBRs will be toppled by PGAs between 0.1–0.3g. We discuss the paleoseismic history of the Fort Sage fault in the context of the nearby PBRs, GMPEs, and probabilistic seismic hazard maps for extensional regimes. If the Fort Sage PBRs are older than the mid‐Holocene rupture on the Fort Sage fault zone, this implies that current GMPEs may overestimate near‐fault footwall ground motions at this site.

California↗

USGS2019

Shallow structure and geomorphology along the offshore northern San Andreas Fault, Tomales Point to Fort Ross, California

We mapped a poorly documented 35-km-long section of the northern San Andreas fault zone (NSAF) between Tomales Point and Fort Ross, California. Mapping is largely based on high-resolution seismic-reflection profiles (38 fault crossings), multibeam bathymetry, and onshore geology. NSAF strike in this section is nearly parallel to plate motion, characterized by a slight (~2°) northerly (transtensional) bend in the south between Tomales Bay and the Bodega isthmus, and a northwesterly (transpressional) ~5° bend in the north between the Bodega isthmus and Fort Ross. The southern transtensional bend is the northern part of the now-submerged, linear, ~50-km-long and 1- to 2-km-wide, "Tomales-Bodega valley." The valley floor is cut by a complex zone of subparallel, variably continuous fault strands and the deformed valley fill is an inferred mix of late Quaternary marine and nonmarine strata. In the northern part of this elongate valley, Holocene fault offset occurred on two fault strands about 740 m apart. The northern transpressional bend is characterized by narrow, elongate, asymmetric basins containing as much as 56 m of inferred latest Pleistocene to Holocene sediment. Between Bodega Head and Fort Ross, the gently dipping (~0.8°) shelf includes two large (4.8 and 5.9 km2) zones of sediment failure that we speculatively correlate with the 1906 San Francisco NSAF earthquake. Similar sediment-failure zones should be common along offshore reaches of the NSAF and other nearshore fault zones, but have apparent limited preservation potential. Onland geomorphic impacts of the mainly offshore NSAF include: (1) Northward upwarping of uplifted marine terraces in the transpressional zone north of Bodega Bay; and (2) Blocking of littoral sediment transport by uplifts on the west flank of the NSAF at Bodega Head and Tomales Point, resulting in rapidly accreting beaches and large coastal sand dune complexes.

California↗

USGS2020

Post-glacial Mw 7.0-7.5 earthquakes on the North Olympic fault zone, Washington

Holocene crustal faulting in the northern Olympic Peninsula of Washington State manifests in a zone of west‐northwest‐striking crustal faults herein named the North Olympic fault zone, which extends for ∼ 80    km "> ∼ 80 km ∼80 km along strike and includes the Lake Creek–Boundary Creek fault to the east and the Sadie Creek fault and newly discovered scarps to the west. This study focuses on the Sadie Creek fault, which extends for > 14    km "> > 14 km >14 km west‐northwest from Lake Crescent. Airborne light detection and ranging (lidar) imagery reveals the trace of the Sadie Creek fault and offset postglacial landforms showing a history of Holocene surface‐rupturing earthquakes dominated by dextral displacement along a steeply dipping fault zone. Paleoseismic trenches at two sites on the Sadie Creek fault reveal till and outwash overlain by progressively buried forest and wetland soils developed on scarp‐derived colluvial wedges. Trench exposures of complex faulting with subhorizontal slickenlines indicate dextral displacement with lesser dip slip. Correlation of broadly constrained time intervals for earthquakes at the Sadie Creek sites and those to the east along the Lake Creek–Boundary Creek fault is consistent with rupture of much of the length of the North Olympic fault zone three to four times: at about 11, 7, 3, and 1 ka, with a shorter rupture at about 8.5 ka. Dated ruptures from trenches only partially coincide with coseismic landslides and megaturbidites in Lake Crescent, indicating that some earthquakes did not trigger megaturbidites, and some turbidites were unrelated to local fault rupture. Landform mapping suggests single‐event dextral displacement of 4 ± 1    m "> 4 ± 1 m 4±1 m on the Sadie Creek fault. Inferred maximum rupture length and single‐event slip imply earthquake magnitudes M w "> M w Mw 7.0–7.5. Dextral slip rates of 1.3 – 2.3    mm / yr "> 1.3 – 2.3 mm / yr 1.3–2.3 mm/yr and the ∼ 11 , 000    yr "> ∼ 11 , 000 yr ∼11,000 yr slip history suggest that the North Olympic fault zone is a prominent contributor to permanent strain in the northern Cascadia fore‐arc.

Washington↗

USGS2016

Preliminary assessment of a previously unknown fault zone beneath the Daytona Beach sand blow cluster near Marianna, Arkansas

We collected new high‐resolution P ‐wave seismic‐reflection data to explore for possible faults beneath a roughly linear cluster of early to mid‐Holocene earthquake‐induced sand blows to the south of Marianna, Arkansas. The Daytona Beach sand blow deposits are located in east‐central Arkansas about 75 km southwest of Memphis, Tennessee, and about 80 km south of the southwestern end of the New Madrid seismic zone (NMSZ). Previous studies of these sand blows indicate that they were produced between 10,500 and 5350 yr B.P. (before A.D. 1950). The sand blows are large and similar in size to those in the heart of the NMSZ produced by the 1811–1812 earthquakes. The seismic‐reflection profiles reveal a previously unknown zone of near‐vertical faults imaged in the 100–1100‐m depth range that are approximately coincident with a cluster of earthquake‐induced sand blows and a near‐linear surface lineament composed of air photo tonal anomalies. These interpreted faults are expressed as vertical discontinuities with the largest displacement fault showing about 40 m of west‐side‐up displacement at the top of the Paleozoic section at about 1100 m depth. There are about 20 m of folding on reflections within the Eocene strata at 400 m depth. Increasing fault displacement with depth suggests long‐term recurrent faulting. The imaged faults within the vicinity of the numerous sand blow features could be a causative earthquake source, although it does not rule out the possibility of other seismic sources nearby. These newly located faults add to a growing list of potentially active Pleistocene–Holocene faults discovered over the last two decades that are within the Mississippi embayment region but outside of the historical NMSZ.

Arkansas↗

USGS2017

Quaternary displacement rates on the Meeman‐Shelby fault and Joiner ridge horst, eastern Arkansas: Results from coring Mississippi River alluvium

This research used coring and optically stimulated luminescence (OSL) dating of displaced, deeply buried Quaternary alluvium to determine vertical displacement rates for the Meeman‐Shelby fault and the Joiner ridge horst, two structures in northeastern Arkansas that have no modern seismicity associated with them. We drilled continuous cores of the entire alluvial section in the hanging wall of each structure, performed detailed core descriptions and analyses, and obtained three OSL ages from each core. The Meeman‐Shelby fault core consists of 36 m of 4.3–5.2‐ka Holocene alluvium overlying 4 m of 14.3‐ka Kennett alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 41 m. Seismic reflection indicates that the basal (Kennett) alluvium at the Meeman‐Shelby fault is displaced ∼28 m across the Meeman‐Shelby fault, which equates to a time‐averaged vertical displacement rate of 2 mm/yr within the last 14.3 ka. The Joiner ridge horst core consists, in descending order, of 11 m of 6.3‐ka Holocene alluvium, 14 m of 11.5‐ka Morehouse alluvium, a paleosol, 6 m of Kennett alluvium, and 4 m of 20.3‐ka Sikeston alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 36 m. Lignite exploration drilling conducted in the 1970s indicates that basal (Sikeston) alluvium is displaced ∼20 m across the eastern bounding fault of the Joiner ridge horst, resulting in a time‐averaged vertical displacement rate of ∼1 mm/yr within the last 20.3 ka. These late Quaternary displacement rates are comparable to time‐averaged displacement rates of faults within the active New Madrid seismic zone.

Arkansas↗

USGS1991

The Marina District, San Francisco, California: Geology, history, and earthquake effects

A northwest-trending valley in the bedrock surface is buried by firm Pleistocene bay clay, a dense Pleistocene sand layer, soft Holocene bay sediments, loose to dense Holocene beach and dune sands, and artificial fill that have an aggregate maximum thickness of about 90 m (300 ft). Artificial filling of a cove at the site of The Marina District proceeded gradually from the late 1860s to 1912, when major hydraulic filling was done for the Panama-Pacific International Exposition. The remains of thousands of piles driven for the Exposition very probably still exist and have had unknown effects on long-term ground settlement and earthquake-related ground displacements. Intensity maps of the 1906 earthquake, and seismic recordings and severe building damage in 1989, reported by others, indicate that ground motion was amplified on both natural and artificial ground. This suggests that the configuration of the bedrock surface and the location and thickness of various clay and sand deposits underlying the fill had an important effect on the shaking. However, most of the settlement and liquefaction and the damage to pipelines, building foundations, streets, side-walks, and curbs occurred in areas of artificial fill consisting mainly of loose sand.

California↗

USGS1997

Geomorphic response to tectonically-induced ground deformation in the Wabash Valley

Numerous low- to moderate-intensity earthquakes have been recorded in a zone of diffuse modern seismicity in southwest Indiana, southeast Illinois, and northernmost Kentucky. Structural elements within the zone include the Wabash Valley Fault System, the LaSalle Anticlinal Belt in western Illinois, and the Rough Creek-Shawneetown Fault System in northern Kentucky. The presence of seismically-induced liquefaction features in the near-surface alluvial sediments in the region indicates that strong ground motion has occurred in the recent geological past, but because the glacial and alluvial sediments in the Wabash Valley appear to be otherwise undisturbed, post-Paleozoic ground deformation resulting from movement on these structural elements has not yet been documented. Morphometric analysis of the land surface, detailed mapping of geomorphic elements in the valley, reconnaissance drilling of the Holocene and Pleistocene alluvium, and structural analysis of the bedrock underlying the valley were used to determine whether the geomorphology of the valley and the patterns of alluviation of the Wabash River were affected by surface deformation associated with the seismic zone during the late Pleistocene and Holocene. Among the observed features in the valley that can be attributed to deformation are: (1) tilting of the modern land surface to the west, (2) preferred channel migration toward the west side of the valley, with concomitant impact on patterns of soil development and sedimentation rate, (3) a convex longitudinal profile of the Wabash River where it crosses the LaSalle Anticlinal Belt, and (4) increased incision of the river into its floodplain downstream from the anticlinal belt.

Illinois, Indiana↗

USGS2000

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗