SEARCH · Search USGS

Results for “Studies in Maine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

USGS2013

Geophysical and hydrologic analysis of an earthen dam site in southern Westchester County, New York

Ninety percent of the drinking water for New York City passes through the Hillview Reservoir facility in the City of Yonkers, Westchester County, New York. In the past, several seeps located downslope from the reservoir have flowed out from the side of the steepest slope at the southern end of the earthen embankment. One seep that has been flowing continuously was discovered during an inspection of the embankment in 1999. Efforts were made in 2001 to locate the potential sources of the continuous flowing seep. In 2005, the U.S. Geological Survey, in cooperation with the New York City Department of Environmental Protection, began a cooperative study to investigate the relevant hydrogeologic framework to characterize the local groundwater-flow system and to determine possible sources of the seeps. The two agencies used hydrologic and surface geophysical techniques to assess the earthen embankment of the Hillview Reservoir. Between April 1, 2005 and March 1, 2008, water levels were measured manually each month at 46 wells surrounding the reservoir, and flow was measured monthly at three of the five seeps on the embankment. Water levels were measured hourly in the East Basin of the reservoir, at 24 of 46 wells, and discharge was measured hourly at two of the five seeps. Slug tests were performed at 16 wells to determine the hydraulic conductivity of the geologic material surrounding the screened zone. Estimated hydraulic conductivities for 25 wells on the southern embankment ranged from 0.0063 to 1.2 feet per day and averaged 0.17 foot per day. The two-dimensional resistivity surveys indicate a subsurface mound of electrically conductive material (low-resistivity zone) beneath the terrace area (top of dam) surrounding the reservoir with a distinct elevation increase closer to the crest. Two-dimensional shear wave velocity surveys indicate a similar structure of the high shear wave velocity materials (high-velocity zone), increasing in elevation toward the crest and decreasing toward the reservoir and toward the northern part of the study area. Water-quality samples collected from 12 wells, downtake chamber 1 of the reservoir, and two seeps detected the presence of arsenic, toluene, and two trihalomethanes. Water-quality samples collected at the two seeps detected fluoride, indicating a connection with reservoir water. Shallow wells on the southern embankment exhibited the largest seasonal water-level fluctuations ranging between 6 feet and 12 feet. The embankment is constructed from reworked low-permeability glacial deposits at the site. Water-level responses in observation wells within the embankment indicate that there is a shallow (approximately the upper 45 feet of the embankment) and a deep water-bearing unit within the embankment with a large downward vertical gradient between the shallow and deep water-bearing units. Precipitation strongly affected water levels in shallow wells, whereas the basin appears to be the main control on water levels in the deep wells. Seeps on the embankment slope appear to be caused by above-average precipitation that increases water levels in the shallow water-bearing unit, but does not easily recharge the deep water-bearing unit. Based on the data that have been analyzed, source water to the seeps appears to be primarily groundwater and, to a lesser extent, water from the East Basin of the reservoir.

New York↗

USGS1999

Estimating the magnitude of peak flows for streams in Maine for selected recurrence intervals

This report gives estimates of, and presents techniques for estimating, the magnitude of peak flows for streams in Maine for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years. A flowchart in this report guides the user to the appropriate estimates and (or) estimating techniques for a site on a specific stream. Section 1, 'Estimates of peak flows and maximum recorded flows at USGS streamflow-gaging stations,' contains peak-flow estimates and the maximum recorded flows at 98 U.S. Geological Survey (USGS) streamflow-gaging stations. In the development of the peak-flow estimates at gaging stations, a new generalized skew coefficient was calculated for Maine. This single statewide value of 0.029 (with a standard error of prediction of 0.297) is more accurate for Maine than the national skew isoline map in Bulletin 17B of the Interagency Advisory Committee on Water Data. Two techniques are presented to estimate the peak flows for ungaged, unregulated streams in rural drainage basins. These two techniques were developed using generalized least squares regression procedures at 70 USGS gaging stations in Maine and eastern New Hampshire. Section 2, 'Estimating peak flows for ungaged, unregulated streams in rural drainage basins,' uses the final explanatory variables of drainage area and basin wetlands. The average standard error of prediction for the 100-year peak flow regression equation in section 2 was 48.6 percent to -32.7 percent. Drainage area was the only explanatory variable used in section 3, 'Estimating peak flows for ungaged, unregulated streams in rural drainage basins - Simplified technique.' The average standard error of prediction for the 100-year peak flow regression equation in section 3 was 80.3 percent to -44.5 percent. Section 4 of the report describes techniques for estimating peak flows for ungaged sites on gaged, unregulated streams in rural drainage basins. Section 5, 'Estimating peak flows for ungaged, unregulated streams in urbanized drainage basins,' describes regression equations for use when a drainage basin is urbanized. These urban regression equations come from a previous USGS nationwide study. As stated in section 6, because peak flows on regulated streams are dependent on variable human actions, estimating peak flows at ungaged sites on regulated streams is beyond the scope of this report.

Maine↗

USGS2003

Occurrence and distribution of dissolved trace elements in the surface waters of the Yakima River basin, Washington

The occurrence, distribution, and transport of dissolved (filtered-water) trace elements in the surface waters of the Yakima River Basin were assessed using data collected between 1999 and 2000 as part of the U.S. Geological Survey s National Water-Quality Assessment (NAWQA) Program. Samples were collected at 34 sites throughout the basin in August 1999, using a Lagrangian sampling design. From May 1999 through January 2000, samples also were collected weekly during the irrigation season and once per month during the nonirrigation season at three intensive fixed sites. Although the focus of this study was on 9 trace elements (aluminum, arsenic, barium, copper, iron, manganese, nickel, uranium, and zinc), 14 additional elements were analyzed in filtered water. Concentrations of most trace elements in filtered water generally were low and there were no exceedances of the U.S. Environmental Protection Agency (USEPA) freshwater aquatic-life water-quality criteria. The USEPA drinking-water standard for arsenic (10 µg/L) was exceeded in two samples that were collected under base-flow conditions during the nonirrigation season at Granger Drain. Over 40 percent of all filtered-water samples collected during this study exceeded the USEPA health advisory level of 2.0 µg/L for arsenic. Arsenic concentrations in agricultural drains were highest when the drains were primarily fed by shallow ground water, and concentrations in the Yakima River were highest when the river was fed primarily by agricultural return flow. The USEPA secondary maximum contaminant level for manganese (50 µg/L) was exceeded in three samples collected at Granger Drain during the nonirrigation season. Instantaneous arsenic loads calculated for August 1999 were similar to mean monthly loads determined in August 1989 at two intensive fixed sites located on the Yakima main stem. In August 1999, arsenic loads increased twofold between the Yakima River at river mile 72 above Satus and the Yakima River at Kiona at river mile 29.9. The dissolved arsenic loads for the Yakima River at Euclid Bridge at river mile 55 near Grandview and Yakima River at Kiona were within 13 percent of the August 1989 levels.

Water-Resources Investigations Report↗

USGS2013

Sand sources and transport pathways for the San Francisco Bay coastal system, based on X-ray diffraction mineralogy

The mineralogical compositions of 119 samples collected from throughout the San Francisco Bay coastal system, including bayfloor and seafloor, area beaches, cliff outcrops, and major drainages, were determined using X-ray diffraction (XRD). Comparison of the mineral concentrations and application of statistical cluster analysis of XRD spectra allowed for the determination of provenances and transport pathways. The use of XRD mineral identifications provides semi-quantitative compositions needed for comparisons of beach and offshore sands with potential cliff and river sources, but the innovative cluster analysis of XRD diffraction spectra provides a unique visualization of how groups of samples within the San Francisco Bay coastal system are related so that sand-sized sediment transport pathways can be inferred. The main vector for sediment transport as defined by the XRD analysis is from San Francisco Bay to the outer coast, where the sand then accumulates on the ebb tidal delta and also moves alongshore. This mineralogical link defines a critical pathway because large volumes of sediment have been removed from the Bay over the last century via channel dredging, aggregate mining, and borrow pit mining, with comparable volumes of erosion from the ebb tidal delta over the same period, in addition to high rates of shoreline retreat along the adjacent, open-coast beaches. Therefore, while previously only a temporal relationship was established, the transport pathway defined by mineralogical and geochemical tracers support the link between anthropogenic activities in the Bay and widespread erosion outside the Bay. The XRD results also establish the regional and local importance of sediment derived from cliff erosion, as well as both proximal and distal fluvial sources. This research is an important contribution to a broader provenance study aimed at identifying the driving forces for widespread geomorphic change in a heavily urbanized coastal-estuarine system.

California↗

USGS2003

Extensive deposits on the Pacific plate from Late Pleistocene North American glacial lake outbursts

One of the major unresolved issues of the Late Pleistocene catastrophic-flood events in the northwestern United States (e.g., from glacial Lake Missoula) has been what happened when the flood discharge reached the ocean. This study compiles available 3.5-kHz high-resolution and airgun seismic reflection data, long-range sidescan sonar images, and sediment core data to define the distribution of flood sediment in deepwater areas of the Pacific Ocean. Upon reaching the ocean at the mouth of the Columbia River near the present-day upper continental slope, sediment from the catastrophic floods continued flowing downslope as hyperpycnally generated turbidity currents. The turbidity currents resulting from the Lake Missoula and other latest Pleistocene floods followed the Cascadia Channel into and through the Blanco Fracture Zone and then flowed west to the Tufts Abyssal Plain. A small part of the flood sediment, which was stripped off the main flow at a bend in the Cascadia Channel at its exit point from the Blanco Fracture Zone, continued flowing more than 400 km to the south and reached the Escanaba Trough, a rift valley of the southern Gorda Ridge. Understanding the development of the pathway for the Late Pleistocene flood sediment reaching Escanaba Trough provides insight for understanding the extent of catastrophic flood deposits on the Pacific plate .

Journal of Geology↗

USGS2000

Transport of suspended and bedload sediment at eight stations in the Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. As part of the investigation, the U.S. Geological Survey designed and implemented a sampling program to assess sediment transport in the Coeur d’Alene River Basin. Suspended and bedload sediments were sampled at four stations at or near base flow and at eight stations during low, moderate, and high discharge conditions between February 1999 and April 2000. The concentrations and loads of suspended and bedload sediment at all stations were directly related to stream discharge. To quantify these relationships, a power function was used to develop sediment-transport curves at all stations. Although the transport curves for most of the stations indicate a good log-log relationship between stream discharge and suspended- and bedload-sediment discharge, there was a fair amount of scatter about the best-fit regression at most stations. For suspended-sediment discharge, the scatter can be primarily attributed to a hysteresis effect in the concentration of suspended sediment as stream discharge rises and falls. The effects of hysteresis on bedload-sediment discharge were difficult to assess because of a paucity of samples collected over the stream hydrograph. At most of the stations, and at the stream discharges sampled, the transport characteristics for fine- and sand-sized suspended sediment were similar. However, at the two main-stem Coeur d’Alene River stations, Rose Lake and Harrison, the suspended-sediment load was primarily composed of fine-grained sediment at stream discharges of less than 15,000 cubic feet per second. These two stations are characterized by relatively slow water velocities, which appear to be insufficient to transport sand-sized sediment at lower stream discharge. At most of the stations, and at the stream discharges sampled, the bedload was primarily composed of material greater than 2 millimeters in diameter, the break between sand and gravel. A predominance of sand-sized bedload was noted at only a few stations, and generally only during low stream discharge. The particle-size distribution of bedload sediment at most stations became proportionately coarser as stream discharge increased. During the peak of snowmelt runoff for water years 1999 and 2000, gravel-sized material between 2 and 64 millimeters in diameter comprised more than 70 percent of the bedload transport at most stations. However, at the station on the Coeur d’Alene River at Rose Lake, the bedload was predominantly composed of fine-grained material of less than 1 millimeter in diameter for all measured stream discharges. The slow water velocities at Rose Lake accounted for the predominance of fine-grained sediment transport.

Idaho↗

USGS2022

Glacial geology and hydrogeology of valley-fill aquifers in the Oneonta area, Otsego and Delaware Counties, New York

The glacial geology and hydrogeology of valley-fill aquifers and their surrounding uplands are described within a 112-square-mile area in southern Otsego and northwestern Delaware Counties, New York, centered around the City of Oneonta. The major valleys include those of the Susquehanna River, Otego Creek, Charlotte Creek, and Schenevus Creek. A variety of data were analyzed to provide a broad picture of the glacial deposits, hydrogeologic framework, aquifer occurrence, and water-resource potential in the area. Both valley-fill and bedrock aquifers are used for water supply within the study area. The valley-fill aquifers consist of coarse-grained stratified drift, are mostly limited to the larger valleys, and have well yields that typically are much greater than those obtained from the bedrock aquifers. The bedrock aquifers generally have lower well yields, are the sole source of groundwater in upland areas, and are tapped in valley areas where sediments are very silty or are absent. Through and non-through valleys and their orientations relative to ice flow have resulted in a variety of deglacial environments and deposits, some of which depart from glacial stratigraphy typically observed elsewhere in central New York. In comparison to through valleys with low in-valley divides, the regional thinning of ice over the high bedrock divides of the non-through valleys resulted in the earlier and more widespread stagnation of glacial ice, development of dead-ice sinks, and earlier diversion of meltwater from ice north of the divides. As the main through valley in the study area, the Susquehanna River valley is characterized by multiple inferred ice-margin positions with associated outwash deposition or ice-contact deposits. Throughout the study area, valleys orientated parallel or subparallel to the ice flow facilitated the development of long ice tongues; valleys oriented perpendicular to the ice flow led to little ice-tongue development, but they did facilitate the deposition of the extensive kame moraines that now occupy several-mile-long valley reaches. Lacustrine sediments were deposited in proglacial lakes. These sediments underlie most valleys that were oriented parallel and subparallel to ice flow, but they are largely absent in the Charlotte Creek valley, which was oriented perpendicular to the ice flow and now contains an extensive kame moraine. Beneath these lacustrine deposits, sand and gravel were deposited as subaqueous fans, eskers, and the distal parts of delta (kame) terraces, each with variable silt content. The presence of coarse-grained stratified deposits, their saturated thicknesses, and their recharge potential are the primary controls on aquifer locations in the study area. The most widespread aquifers in the study area consist of sand and gravel and are confined mostly beneath lacustrine deposits. Confined aquifer yields are enhanced by hydraulic connections with unconfined ice-contact deposits along the valley walls, especially where tributary streams cross these deposits and provide additional recharge through streambed infiltration. The Susquehanna River and other large valley creeks provide a potentially large source of recharge to aquifers where groundwater withdrawals from nearby production wells induce infiltration of river water into aquifers. Unconfined aquifers are present where ice-contact deposits extend below the valley floor and are sufficiently saturated. Most surficial outwash deposits in the study area are thinly saturated; thus their water-resource potential is likely to be limited. The upland areas contain very little stratified drift; therefore, characterization was limited to delineating areas of thick till and thin, or absent, till. Recharge of bedrock aquifers is greatest in areas overlain by thin till or where bedrock is exposed at land surface.

New York↗

USGS2007

Characterizing infiltration through a mine-waste dump using electrical geophysical and tracer-injection methods, Clear Creek County, Colorado

Infiltration of surface water through mine waste can be an important or even dominant source of contaminants in a watershed. The Waldorf mine site in Clear Creek County, Colorado, is typical of tens of thousands of small mines and prospects on public lands throughout the United States. In this study, electromagnetic (EM) conductivity and direct current (dc) resistivity surveys were conducted in tandem with a NaCl tracer study to delineate ground-water flow paths through a mine-waste dump and adjacent wetland area. The tracer was used to tag adit water infiltrating from braided channels flowing over the top of the dump to seeps at the base of the dump. Infiltration from the braided channels had a maximum flow rate of 92 m/day and a hydraulic conductivity of 1.6 × 10 4 cm 3 /s. After rerouting of adit flow around the waste dump, discharge at some of the largest seeps was reduced, although not all seepage was eliminated entirely. Integrating results of the tracer study with those of the EM and dc geophysical surveys revealed two main flow paths of ground water, one beneath the dump and one through the dump. The main source of water to the first flow path is deeper ground water emerging from the fault zone beneath the collapsed adit. This flow path travels beneath the waste dump and appears to have been unaffected by rerouting of the adit discharge around the waste dump. The source of the second flow path is infiltration of adit water from braided channels flowing over the top of the dump, which is intermediate in depth and flows through the center of the waste dump. Following rerouting of adit flow, discharge to seeps at the toe of the dump along this flow path was reduced by as much as two-thirds, although not eliminated entirely. Improved understanding of ground-water flow paths through this abandoned mine site is important in developing effective remediation strategies to target sources of metals emanating from the adit, waste dump, and contaminated wetland area. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. government.

Colorado↗

USGS1985

Seismicity map of the State of Montana

This map is one of a series of seismicity maps produced by the U. S. Geological Survey that show earthquake data of individual states or groups of states at the scale of 1:1,000,000. This map shows only those earthquakes with epicenters located within the boundaries of Montana, even though earthquakes in bordering states or countries may have been felt or may have caused damage in Montana. The data in table 1 were used to compile the seismicity map; these data are a corrected, expanded, and updated (through 1981) version of the data used by Algermissen (1969) for a study of seismic risk in the United States. The locations and intensities of some earthquakes were revised and intensities were assigned where none had been before. Many earthquakes were added to the original list from new data sources as well as from some old data sources that had not been previously used. No earthquakes with magnitudes greater than 2.5 were located in Montana during 1981. The data in table 1 represent best estimates of the location of the epicenter, magnitude, and intensity of each earthquake on the basis of historical and current information. Some of the aftershocks from large earthquakes are listed, but not all, especially for earthquakes that occurred before seismic instruments were universally used. Special criteria used in compiling the list of earthquake in the State of Montana include the following: (1) All earthquakes with epicenters along the Montana-Wyoming border with a latitude of 45° N are listed in Montana. (2) Aftershocks of the 1925 and 1935 earthquakes were assigned the same geographic locations as the main shocks. (3) Instrumental epicenters for the 1959 Hebgen Lake earthquake and its aftershocks were 1ocated in Idaho, Montana, and Wyoming; only the ones located in Montana are included on this map. All non-instrumental locations were given the location of the main shock with an accuracy code that includes the community reporting the maximum intensity. The latitude and longitude coordinates of each epicenter were rounded to the nearest tenth of a degree and sorted so that all identical locations were grouped and counted. These locations are represented on the map by a triangle. The number of earthquakes at each location is shown on the map by the number to the right of the triangle. A Roman numeral to the left of a triangle is the maximum Modified Mercalli intensity (Wood and Neumann, 1931) of all earthquakes at that geographic location. The absence of an intensity value indicates that no intensities have been assigned to earthquakes at that location. The year shown below each triangle is the latest year for which the maximum intensity was recorded.

Montana↗

USGS2017

Characterization of streamflow, suspended sediment, and nutrients entering Galveston Bay from the Trinity River, Texas, May 2014–December 2015

The U.S. Geological Survey (USGS), in cooperation with the Texas Water Development Board and the Galveston Bay Estuary Program, collected streamflow and water-quality data at USGS streamflow-gaging stations in the lower Trinity River watershed from May 2014 to December 2015 to characterize and improve the current understanding of the quantity and quality of freshwater inflow entering Galveston Bay from the Trinity River. Continuous streamflow records at four USGS streamflow-gaging stations were compared to quantify differences in streamflow magnitude between upstream and downstream reaches of the lower Trinity River. Water-quality conditions were characterized from discrete nutrient and sediment samples collected over a range of hydrologic conditions at USGS streamflow-gaging station 08067252 Trinity River at Wallisville, Tex. (hereinafter referred to as the “Wallisville site”), approximately 4 river miles upstream from where the Trinity River enters Galveston Bay. Based on streamflow records, annual mean outflow from Livingston Dam into the lower Trinity River was 2,240 cubic feet per second (ft 3 /s) in 2014 and 22,400 ft 3 /s in 2015, the second lowest and the highest, respectively, during the entire period of record (1966–2015). During this study, only about 54 percent of the total volume measured at upstream sites was accounted for at the Wallisville site as the Trinity River enters Galveston Bay. This difference in water volumes between upstream sites and the Wallisville site indicates that at high flows a large part of the volume released from Lake Livingston does not reach Galveston Bay through the main channel of the Trinity River. These findings indicate that water likely flows into wetlands and water bodies surrounding the main channel of the Trinity River before reaching the Wallisville site and is being stored or discharged through other channels that flow directly into Galveston Bay. To characterize suspended-sediment concentrations and loads in Trinity River inflow to Galveston Bay, a regression model was developed to estimate suspended-sediment concentrations by using acoustic backscatter data as a surrogate. The model yielded an adjusted coefficient of determination value of 0.92 and a root mean square error of 1.65 milligrams per liter (mg/L). The mean absolute percentage error between measured and estimated suspended-sediment concentration was 35 percent. During this study, estimated suspended-sediment concentrations ranged from 2 to 701 mg/L, with a mean of 97 mg/L. Suspended-sediment concentrations varied in response to changes in discharge, with peak suspended-sediment concentrations occurring 1 to 2 days before the peak discharge for each event. The total suspended-sediment load at the Wallisville site during May 2014–December 2015 was approximately 2,200,000 tons, with a minimum monthly suspended-sediment load of 100 tons in October 2014 and a maximum monthly load of 441,000 tons in November 2015. Results from nutrient samples collected at the Wallisville site indicate that total nitrogen and total phosphorus concentrations fluctuated at a similar rate, with the highest nutrient concentrations occurring during periods of high flow corresponding to releases from Lake Livingston. The mean concentrations of total nitrogen and total phosphorus were approximately 75 percent higher during high flow releases than during periods of low flow, overshadowing variations in nutrient concentrations caused by seasonality at the Wallisville site. Results from the study indicate nutrient delivery to Galveston Bay from the main channel of the Trinity River is likely controlled primarily by high-flow releases from Lake Livingston. For most samples collected at the Wallisville site, organic nitrogen was the predominant form of nitrogen; however, when discharge increased because of releases from Lake Livingston, the percentage of organic nitrogen typically decreased and the percentage of nitrate increased. The concentrations of total phosphorus also increased during high-flow events, likely as a result of suspended sediment within Lake Livingston releases and mobilization of sediment particles in the river channel and flood plain during these periods of high flow. The predominant source of phosphorous to Galveston Bay from the Trinity River is in particulate form closely tied to suspended-sediment concentrations. The changes in nutrient concentration and composition caused by releases from Lake Livingston during this study indicate the reservoir may play an important role in the delivery of nutrients into Galveston Bay. Further study is required to better understand the processes in Lake Livingston influencing the characteristics of nutrient and sediment inflow to Galveston Bay. With phosphorous concentrations correlated to suspended-sediment concentrations (coefficient of determination value of 0.75) and with the concentrations of nutrients changing as the discharge changes, the diversion of water and suspended sediment into surrounding wetlands and channels outside of the main channel of the Trinity River may play a large role in regulating nutrient inputs into Galveston Bay.

Texas↗

USGS1999

Nature and origin of upper crustal seismic velocity fluctuations and associated scaling properties: Combined stochastic analyses of KTB velocity and lithology logs

The main borehole of the German Continental Deep Drilling Program (KTB) extends over 9000 m into a crystalline upper crust consisting primarily of interlayered gneiss and metabasite. We present a joint analysis of the velocity and lithology logs in an effort to extract the lithology component of the velocity log. Covariance analysis of lithology log, approximated as a binary series, indicates that it may originate from the superposition of two Brownian stochastic processes (fractal dimension 1.5) with characteristic scales of ∼2800 m and ∼150 m, respectively. Covariance analysis of the velocity fluctuations provides evidence for the superposition of four stochastic process with distinct characteristic scales. The largest two scales are identical to those derived from the lithology, confirming that these scales of velocity heterogeneity are caused by lithology variations. The third characteristic scale, ∼20 m, also a Brownian process, is probably related to fracturing based on correlation with the resistivity log. The superposition of these three Brownian processes closely mimics the commonly observed 1/ k decay (fractal dimension 2.0) of the velocity power spectrum. The smallest scale process (characteristic scale ∼1.7 m) requires a low fractal dimension, ∼1.0, and accounts for ∼60% of the total rms velocity variation. A comparison of successive logs from 6900–7140 m depth indicates that such variations are not repeatable and thus probably do not represent true velocity variations in the crust. The results of this study resolve disparity between the differing published estimates of seismic heterogeneity based on the KTB sonic logs, and bridge the gap between estimates of crustal heterogeneity from geologic maps and borehole logs.

Journal of Geophysical Research B: Solid Earth↗

USGS2004

Water resources of Sweetwater County, Wyoming

Sweetwater County is located in the southwestern part of Wyoming and is the largest county in the State. A study to quantify the availability and describe the chemical quality of surface-water and ground-water resources in Sweetwater County was conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer’s Office. Most of the county has an arid climate. For this reason a large amount of the flow in perennial streams within the county is derived from outside the county. Likewise, much of the ground-water recharge to aquifers within the county is from flows into the county, and occurs slowly. Surface-water data were not collected as part of the study. Evaluations of streamflow and stream-water quality were limited to analyses of historical data and descriptions of previous investigations. Forty-six new ground-water-quality samples were collected as part of the study and the results from an additional 782 historical ground-water-quality samples were reviewed. Available hydrogeologic characteristics for various aquifers throughout the county also are described. Flow characteristics of streams in Sweetwater County vary substantially depending on regional and local basin characteristics and anthropogenic factors. Because precipitation amounts in the county are small, most streams in the county are ephemeral, flowing only as a result of regional or local rainfall or snowmelt runoff. Flows in perennial streams in the county generally are a result of snowmelt runoff in the mountainous headwater areas to the north, west, and south of the county. Flow characteristics of most perennial streams are altered substantially by diversions and regulation. Water-quality characteristics of selected streams in and near Sweetwater County during water years 1974 through 1983 were variable. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were smallest at sites on the Green River because of resistant geologic units, increased vegetative cover, large diluting streamflows, and large reservoirs. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were largest at sites in the Big Sandy River and Bitter Creek Basins. Some nutrient concentrations and bacteria counts exceeded various State and Federal water-quality criteria. Historical and recent anthropogenic activities contributed to natural sources of many dissolved constituents and suspended sediment. Both water-table and artesian conditions occur in aquifers within the county. Shallow ground water is available throughout the county, although much of it is only marginally suitable or is unsuitable for domestic and irrigation uses mainly because of high total dissolved solids (TDS) concentrations. Suitable ground water for livestock use can be found in most areas of the county. Ground-water quality tends to deteriorate with increasing distance from recharge areas and with increasing depth below land surface. Ground water from depths of greater than a few thousand feet tends to have TDS concentrations that make it moderately saline to briny. In some areas even shallow ground water has moderately saline TDS concentrations. Specific constituents in parts of some aquifers in the county occur in relatively high concentrations when compared to U.S. Environmental Protection Agency drinking-water standards. Relatively high concentrations of sulfate, fluoride, boron, iron, and manganese were found in several aquifers. Many ground-water samples from the Battle Spring aquifer in the Great Divide Structural Basin had high radionuclide concentrations. The estimated mean daily water use in Sweetwater County in 2000 was 170.73 million gallons per day. Irrigation was the largest single use of water in the county with an estimated mean use of more than 92 million gallons per day. Surface water irrigation accounted for nearly 90 percent of the total irrigation water used in 2000. Although ground water is used to a much lesser extent than surface water, in many areas of the county it is the only source of water available.

Wyoming↗

USGS2025

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America↗

USGS2010

Coastal-change and glaciological map of the Ross Island area, Antarctica

Reduction in the area and volume of Earth?s two polar ice sheets is intricately linked to changes in global climate and to the resulting rise in sea level. Measurement of changes in area and mass balance of the Antarctic ice sheet was given a very high priority in recommendations by the Polar Research Board of the National Research Council. On the basis of these recommendations, the U.S. Geological Survey used its archive of satellite images to document changes in the cryospheric coastline of Antarctica and analyze the glaciological features of the coastal regions. The Ross Island area map is bounded by long 141? E. and 175? E. and by lat 76? S. and 81? S. The map covers the part of southern Victoria Land that includes the northwestern Ross Ice Shelf, the McMurdo Ice Shelf, part of the polar plateau and Transantarctic Mountains, the McMurdo Dry Valleys, northernmost Shackleton Coast, Hillary Coast, the southern part of Scott Coast, and Ross Island. Little noticeable change has occurred in the ice fronts on the map, so the focus is on glaciological features. In the western part of the map area, the polar plateau of East Antarctica, once thought to be a featureless region, has subtle wavelike surface forms (megadunes) and flow traces of glaciers that originate far inland and extend to the coast or into the Ross Ice Shelf. There are numerous outlet glaciers. Glaciers drain into the McMurdo Dry Valleys, through the Transantarctic Mountains into the Ross Sea, or into the Ross Ice Shelf. Byrd Glacier is the largest. West of the Transantarctic Mountains are areas of blue ice, readily identifiable on Landsat images, that have been determined to be prime areas for finding meteorites. Three subglacial lakes have been identified in the map area. Because McMurdo Station, the main U.S. scientific research station in Antarctica, is located on Ross Island in the map area, many of these and other features in the area have been studied extensively. The paper version of this map is available for purchase from the USGS Store.

IMAP↗

USGS2007

Simulation of flow and habitat conditions under ice, Cache la Poudre River - January 2006

The U.S. Forest Service authorizes the occupancy and use of Forest Service lands by various projects, including water storage facilities, under the Federal Land Policy and Management Act. Federal Land Policy and Management Act permits can be renewed at the end of their term. The U.S. Forest Service analyzes the environmental effects for the initial issuance or renewal of a permit and the terms and conditions (for example, mitigations plans) contained in the permit for the facilities. The U.S. Forest Service is preparing an environmental impact statement (EIS) to determine the conditions for the occupancy and use for Long Draw Reservoir on National Forest System administered lands. The scope of the EIS includes evaluating current operations and effects to fish habitat of an ongoing winter release of 0.283 m3 /s (10 ft3 /s) from headwater reservoirs as part of a previously issued permit. The field conditions observed during this study included this release. The U.S. Forest Service entered into an interagency agreement (05-IA-11021000-030) with the U.S. Geological Survey (USGS) Fort Collins Science Center to perform analysis of fish habitat and flow relationships in the Cache la Poudre River during winter ice-over conditions using a twodimensional hydrodynamic model. The U.S. Forest Service selected the Fort Collins Science Center for this task because of their expertise in developing two-dimensional hydraulic models for habitat modeling applications. This report transmits model results to the U.S. Forest Service to analyze the effects of alternative flow scenarios at a site on the mainstem Cache la Poudre River in Larimer County, Colorado, near Kinikinik (40° 42' 44.16" N. lat, 105° 44' 30.70" W. log), as shown in figure 1. It will be used in pending environmental analyses and decisions for the occupancy and use of the Arapaho-Roosevelt National Forest by water storage facilities. The water management scenarios of interest in this study are related to releasing water from Chambers and Barnes Meadows Reservoirs, based on the assumption that winter flow augmentation can increase potential fish habitat. Figure 2 shows the relationship between Chambers, Barnes Meadows, and Long Draw Reservoirs. At the time this study was proposed, existing flow simulation results showed that the channel constraints imposed by existing artificial low-head dikes would have little or no effect on the hydrodynamics of the river at the low flow levels that were to be evaluated. The Kinikinik study site contains deep pools, riffles, and runs. This diversity of habitat types made it ideal for assessing the effects of altered flow on fish habitat under ice in the main stem Cache la Poudre River. Thus, the Kinikinik site was selected for this study of winter habitat conditions. The preexisting topographic and hydrologic data collected at this site enabled data collection efforts for this study to focus on describing streamflow and ice cover during the winter months. A two-dimensional hydrodynamic model, River2D (Steffler and Blackburn, 2002), was used to simulate flow conditions under the ice cover that was observed January 24, 2006. The objectives of this study are (1) to describe the extent and thickness of ice cover, (2) simulate depth and velocity under ice at the study site for observed and reduced flows, and (3) to quantify fish habitat in this portion of the mainstem Cache la Poudre River for the current winter release schedule as well as for similar conditions without the 0.283 m 3 /s winter release.

Colorado↗

USGS2008

Effects of urbanization on stream ecosystems in the Willamette River basin and surrounding area, Oregon and Washington

This report describes the effects of urbanization on physical, chemical, and biological characteristics of stream ecosystems in 28 watersheds along a gradient of urbanization in the Willamette River basin and surrounding area, Oregon and Washington, from 2003 through 2005. The study that generated the report is one of several urban-effects studies completed nationally by the U.S. Geological Survey National Water-Quality Assessment Program. Watersheds were selected to minimize natural variability caused by factors such as geology, elevation, and climate, and to maximize coverage of different stages of urban development among watersheds. Because land use or population density alone often are not a complete measure of urbanization, a combination of land use, land cover, infrastructure, and socioeconomic variables were integrated into a multimetric urban intensity index (UII) to represent the degree of urban development in each watershed. Physical characteristics studied include stream hydrology, stream temperature, and habitat; chemical characteristics studied include sulfate, chloride, nutrients, pesticides, dissolved and particulate organic and inorganic carbon, and suspended sediment; and biological characteristics studied include algal, macroinvertebrate, and fish assemblages. Semipermeable membrane devices, passive samplers that concentrate trace levels of hydrophobic organic contaminants such as polycyclic aromatic hydrocarbons and polychlorinated biphenyls, also were used. The objectives of the study were to (1) examine physical, chemical, and biological responses along the gradient of urbanization and (2) determine the major physical, chemical, and landscape variables affecting the structure of aquatic communities. Common effects documented in the literature of urbanization on instream physical, chemical, and biological characteristics, such as increased contaminants, increased streamflow flashiness, increased concentrations of chemicals, and changes in aquatic community structure toward a more tolerant community associated with organically enriched conditions, generally were observed in this study. The strongest correlations to the UII and to many of the algal, macroinvertebrate, and fish assemblage metrics and community ordination involved water-chemistry metrics including the total pesticide concentration, toxic equivalents (extract assay from semipermeable membrane devices), and dissolved oxygen. Hydrologic variability metrics, such as flashiness, that normally are considered to be one of the main processes of urban disturbance had a strong association to the algal and fish assemblages in this study; however, the hydrologic variables for macroinvertebrates were secondary to the water-chemistry metrics mentioned above. Generally, the high urban intensity sites had high abundances of eutrophic and lower dissolved oxygen-indicating diatoms, high abundances of noninsects and tolerant insects, and high abundances of nonnative fish species. On the other hand, the low urban intensity sites had higher abundances of pollution sensitive diatoms, larger numbers of the sensitive macroinvertebrate EPT taxa (Ephemeroptera, Plecoptera and Trichoptera Orders), and fish assemblages with higher abundances of sensitive salmonids. The percent salmonid and macroinvertebrate EPT richness metrics plotted against the UII indicated a possible threshold response at about 25 on the UII, which is equivalent to an impervious surface value of about 5 percent. However, due to the added agricultural land use at sites within the 25 to 60 UII range, this possible threshold probably is not solely due to urbanization, but a combination of urban and agricultural land use. The effects of agricultural and urban land use could not be distinguished from each other, yet combined they provide a good assessment of overall watershed disturbance.

Oregon, Washington↗

USGS2003

Geologic map of the Big Delta B-2 quadrangle, east-central Alaska

New 1:63,360-scale geologic mapping of the Big Delta B-2 quadrangle provides important data on the structural setting and age of geologic units, as well as on the timing of gold mineralization plutonism within the Yukon-Tanana Upland of east-central Alaska. Gold exploration has remained active throughout the region in response to the discovery of the Pogo gold deposit, which lies within the northwestern part of the quadrangle near the south bank of the Goodpaster River. Geologic mapping and associated geochronological and geochemical studies by the U.S. Geological Survey (USGS) and the Alaska Department of Natural Resources, Division of Mining and Water Management, provide baseline data to help understand the regional geologic framework. Teck Cominco Limited geologists have provided the geologic mapping for the area that overlies the Pogo gold deposit as well as logistical support, which has lead to a much improved and informative product. The Yukon-Tanana Upland lies within the Tintina province in Alaska and consists of Paleozoic and possibly older(?) supracrustal rocks intruded by Paleozoic (Devonian to Mississippian) and Cretaceous plutons. The oldest rocks in the Big Delta B-2 quadrangle are Paleozoic gneisses of both plutonic and sedimentary origin. Paleozoic deformation, potentially associated with plutonism, was obscured by intense Mesozoic deformation and metamorphism. At least some of the rocks in the quadrangle underwent tectonism during the Middle Jurassic (about 188 Ma), and were subsequently deformed in an Early Cretaceous contractional event between about 130 and 116 Ma. New U-Pb SHRIMP data presented here on zircons from the Paleozoic biotite gneisses record inherited cores that range from 363 Ma to about 2,130 Ma and have rims of euhedral Early Cretaceous metamorphic overgrowths (116 +/- 4 Ma), interpreted to record recrystallization during Cretaceous west-northwest-directed thrusting and folding. U-Pb SHRIMP dating of monazite from a Paleozoic gneiss sample yields an age of 112 +/- 2 Ma; the monazite presumably grew during the waning stages of the intense regional Cretaceous ductile deformation. The Cretaceous ductile deformation was followed closely by granite plutonism and gold mineralization. The main pulse of gold mineralization is temporally and spatially associated with the Cretaceous granitic dikes and plutons and occurred during regional uplift and extension.

IMAP↗

USGS2003

Mapping hydrothermally altered rocks at Cuprite, Nevada, using the advanced spaceborne thermal emission and reflection radiometer (Aster), a new satellite-imaging system

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is a 14-band multispectral instrument on board the Earth Observing System (EOS), TERRA. The three bands between 0.52 and 0.86 ??m and the six bands from 1.60 and 2.43 ??m, which have 15- and 30-m spatial resolution, respectively, were selected primarily for making remote mineralogical determinations. The Cuprite, Nevada, mining district comprises two hydrothermal alteration centers where Tertiary volcanic rocks have been hydrothermally altered mainly to bleached silicified rocks and opalized rocks, with a marginal zone of limonitic argilized rocks. Country rocks are mainly Cambrian phyllitic siltstone and limestone. Evaluation of an ASTER image of the Cuprite district shows that spectral reflectance differences in the nine bands in the 0.52 to 2.43 ??m region provide a basis for identifying and mapping mineralogical components which characterize the main hydrothermal alteration zones: opal is the spectrally dominant mineral in the silicified zone; whereas, alunite and kaolinite are dominant in the opalized zone. In addition, the distribution of unaltered country rocks was mapped because of the presence of spectrally dominant muscovite in the siltstone and calcite in limestone, and the tuffaceous rocks and playa deposits were distinguishable due to their relatively flat spectra and weak absorption features at 2.33 and 2.20 ??m, respectively. An Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) image of the study area was processed using a similar methodology used with the ASTER data. Comparison of the ASTER and AVIRIS results shows that the results are generally similar, but the higher spectral resolution of AVIRIS (224 bands) permits identification of more individual minerals, including certain polymorphs. However, ASTER has recorded images of more than 90 percent of the Earth's land surface with less than 20 percent cloud cover, and these data are available at nominal or no cost. Landsat TM images have a similar spatial resolution to ASTER images, but TM has fewer bands, which limits its usefulness for making mineral determinations.

Economic Geology↗