Search USGS⌕ Search

SEARCH · Search USGS

Results for “The Seismic Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS2024

Seismic response comparison of a historical masonry church subject to real and simulated ground motions

In recent years, advanced numerical models and high-performance computing have facilitated the utilization of ground motion time series in the assessment of the non-linear dynamic behavior of historic masonry structures. Since recorded accelerograms can be sparse for specific analysis conditions, stochastic ground motion simulations have become a viable alternative to overcome this limitation. This study simulates the recorded acceleration time series of the Central Italy 2016 earthquake event at the closest station to the town of Macerata using a site-based stochastic approach. The simulated motions are seismologically evaluated using a goodness-of-fit method in terms of various intensity measures. The simulated records, in conjunction with real records, are used to study the non-linear dynamic behavior of San Filippo Neri church located in Macerata. The church of San Filippo represents an important example of Baroque religious architecture in central Italy, which was damaged and closed off to the public after the 2016 earthquake events. The construction was investigated with a vast diagnostic campaign which included on-site testing and dynamic identification tests. The collected data is used to calibrate the dynamic response of a three-dimensional finite element model of the church. The model is finally used to compare the non-linear seismic responses under real and simulated ground motions with the site recorded damage. The results of structural responses demonstrate a strong agreement between the real and simulated records, providing evidence to support the validation of the site-based stochastic simulation.

Macerata↗
USGS2022

Update on the Center for Engineering Strong-Motion Data (CESMD)

he Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a unified access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System (ANSS), and other affiliates. The CESMD works closely with the ANSS and with the Consortium of Organizations for Strong-Motion Observation Systems (COSMOS) to engage with strong-motion networks in the U.S. and other countries to receive, process, and post records. The CESMD has recently developed new tools to facilitate access to strong-motion data and metadata for use in post-earthquake response and scientific research applications. The Center provides raw and processed strong-motion data via its Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals, currently hosting more than 60,000 records with peak ground accelerations greater than 0.1% g, from over 3,000 earthquakes. This short paper provides updates of the available strong-motion data, station metadata, recent enhancements and developments of the tools, and applications that are made available to users for accessing strong-motion data.

Conference Paper↗
USGS2011

Testing long-period ground-motion simulations of scenario earthquakes using the Mw 7.2 El Mayor-Cucapah mainshock: Evaluation of finite-fault rupture characterization and 3D seismic velocity models

Using a suite of five hypothetical finite-fault rupture models, we test the ability of long-period ( T >2.0 s) ground-motion simulations of scenario earthquakes to produce waveforms throughout southern California consistent with those recorded during the 4 April 2010 M w 7.2 El Mayor-Cucapah earthquake. The hypothetical ruptures are generated using the methodology proposed by Graves and Pitarka (2010) and require, as inputs, only a general description of the fault location and geometry, event magnitude, and hypocenter, as would be done for a scenario event. For each rupture model, two Southern California Earthquake Center three-dimensional community seismic velocity models (CVM-4m and CVM-H62) are used, resulting in a total of 10 ground-motion simulations, which we compare with recorded ground motions. While the details of the motions vary across the simulations, the median levels match the observed peak ground velocities reasonably well, with the standard deviation of the residuals generally within 50% of the median. Simulations with the CVM-4m model yield somewhat lower variance than those with the CVM-H62 model. Both models tend to overpredict motions in the San Diego region and underpredict motions in the Mojave desert. Within the greater Los Angeles basin, the CVM-4m model generally matches the level of observed motions, whereas the CVM-H62 model tends to overpredict the motions, particularly in the southern portion of the basin. The variance in the peak velocity residuals is lowest for a rupture that has significant shallow slip (<5 km depth), whereas the variance in the residuals is greatest for ruptures with large asperities below 10 km depth. Overall, these results are encouraging and provide confidence in the predictive capabilities of the simulation methodology, while also suggesting some regions in which the seismic velocity models may need improvement.

California↗
USGS2017

Plateau subduction, intraslab seismicity, and the Denali (Alaska) volcanic gap

Tectonic tremors in Alaska (USA) are associated with subduction of the Yakutat plateau, but their origins are unclear due to lack of depth constraints. We have processed tremor recordings to extract low-frequency earthquakes (LFEs), and generated a set of six LFE waveform templates via iterative network matched filtering and stacking. The timing of impulsive P (compressional) wave and S (shear) wave arrivals on template waveforms places LFEs at 40–58 km depth, near the upper envelope of intraslab seismicity and immediately updip of increased levels of intraslab seismicity. S waves at near-epicentral distances display polarities consistent with shear slip on the plate boundary. We compare characteristics of LFEs, seismicity, and tectonic structures in central Alaska with those in warm subduction zones, and propose a new model for the region’s unusual intraslab seismicity and the enigmatic Denali volcanic gap (i.e., an area of no volcanism where expected). We argue that fluids in the Yakutat plate are confined to its upper crust, and that shallow subduction leads to hydromechanical conditions at the slab interface in central Alaska akin to those in warm subduction zones where similar LFEs and tremor occur. These conditions lead to fluid expulsion at shallow depths, explaining strike-parallel alignment of tremor occurrence with the Denali volcanic gap. Moreover, the lack of double seismic zone and restriction of deep intraslab seismicity to a persistent low-velocity zone are simple consequences of anhydrous conditions prevailing in the lower crust and upper mantle of the Yakutat plate.

Alaska↗
USGS1990

Pre- and poststack migration of GLIMPCE reflection data

GLIMPCE deep Seismic reflection profiles across the Midcontinent Rift System beneath Lake Superior reveal a central asymmetric rift with an enormous thickness of volcanic and sedimentary rocks. True amplitude cmp-processing, poststack and prestack migration and forward modelling are used to improve images of steeply dipping faults, unconformities and other discontinuities in the deep Seismic data. With prestack migration important steeply dipping structural features of the Lake Superior data set are revealed for the first time. Improved images of high-angle normal faults, later reactivated as reverse faults, provide key structural information for understanding the evolution of the rift system. Results illustrate that structural interpretations of complex deep reflection records, such as those recorded by GLIMPCE, should always be based on migrated data. Furthermore, depth-migrated sections provide useful starting models for forward velocity modelling of seismic data.

Lake Superior↗
USGS1999

Subsurface gas offshore of northern California and its link to submarine geomorphology

The northern California continental margin contains evidence of abundant subsurface gas and numerous seafloor features that suggest a causative link between gas expulsion and geomorphology. Analyses of seismic reflection, sidescan sonar, and high-resolution multibeam bathymetric data show that the occurrence of subbottom gas and the migration processes beneath the shelf differ from those beneath the slope. Subsurface gas, inferred from enhanced reflectors and other geophysical indicators, is spatially variable and related more to total depth and stratigraphy than to underlying structure, with the exception of one band of gas that follows the regional structural trend. Shallow depressions on the seafloor (pockmarks) are used to infer expulsion sites. The largest zone of acoustically impenetrable subsurface gas occurs between water depths of 100 m and 300 m, where expulsion features are rare. The upper slope (water depths 400-600 m) has a high concentration of pockmarks (diameter 10-20 m), in contrast to a near-absence of pockmarks at water depths shallower than 400 m. Of nearly 4000 pockmarks observed on sidescan sonar records, more than 95% are located in water depths deeper than 400 m. Bottom simulating reflectors (BSRs) on some seismic reflection profiles indicate the possible presence of gas hydrate. We find that gas and pore-fluid migration in the offshore Eel River Basin is: (1) correlated to surface morphology; (2) a contributor to seabed roughness; (3) a significant mode of sediment redistribution on the upper slope; and (4) potentially a factor in large slope failures.

Marine Geology↗
USGS2012

An implosive component in the seismic moment tensor of a mining-Induced tremor

In early 1988, a special study in one of the major South African gold fields yielded seismograms that indicate seismic moment tensors having substantial implosive components. The moment tensor, resulting from the inversion of the ground motion data from the best-recorded event, was decomposed into isotropic and deviatoric components from which both the coseismic volumetric closure Δ V and the total shear deformation AD , where A is fault area and D is average slip, could be estimated. The finding here that Δ V ∼ AD is consistent with earlier analyses of how the tabular mine stopes interact with the surrounding rock mass to produce seismic deformation.

Geophysical Research Letters↗
USGS1989

Analysis of exceptionally large tremors in two gold mining districts of South Africa

An investigation of ground motion, recorded using broad-band, wide dynamic-range digital seismographs, of large mine tremors from two South African mining districts with different geologic settings, reveals some essential differences in both seismic source and ground motion parameters. In the Klerksdorp district where the strata are offset by major throughgoing normal faults, the largest tremors, with magnitudes ranging as high as 5.2, tend to be associated with slip on these pre-existing faults. Moreover, the seismic source and ground motion parameters are quite similar to those of natural crustal earthquakes. In the Carletonville district, by contrast, where substantial faults do not exist, the large-magnitude tremors appear to result from the failure of relatively intact rock and cause seismic stress drops and ground motion parameters higher than normally observed for natural shocks. Additionally, there appears to be an upper magnitude limit of about 4 in the Carletonville district. Detailed analyses of an exceptionally large event recorded locally from each of these districts serve to highlight these contrasts. ?? 1989 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗
USGS2017

Modeling of high‐frequency seismic‐wave scattering and propagation using radiative transfer theory

This is a study of the nonisotropic scattering process based on radiative transfer theory and its application to the observation of the M 4.3 aftershock recording of the 2008 Wells earthquake sequence in Nevada. Given a wide range of recording distances from 29 to 320 km, the data provide a unique opportunity to discriminate scattering models based on their distance‐dependent behaviors. First, we develop a stable numerical procedure to simulate nonisotropic scattering waves based on the 3D nonisotropic scattering theory proposed by Sato (1995). By applying the simulation method to the inversion of M 4.3 Wells aftershock recordings, we find that a nonisotropic scattering model, dominated by forward scattering, provides the best fit to the observed high‐frequency direct S waves and S ‐wave coda velocity envelopes. The scattering process is governed by a Gaussian autocorrelation function, suggesting a Gaussian random heterogeneous structure for the Nevada crust. The model successfully explains the common decay of seismic coda independent of source–station locations as a result of energy leaking from multiple strong forward scattering, instead of backscattering governed by the diffusion solution at large lapse times. The model also explains the pulse‐broadening effect in the high‐frequency direct and early arriving S waves, as other studies have found, and could be very important to applications of high‐frequency wave simulation in which scattering has a strong effect. We also find that regardless of its physical implications, the isotropic scattering model provides the same effective scattering coefficient and intrinsic attenuation estimates as the forward scattering model, suggesting that the isotropic scattering model is still a viable tool for the study of seismic scattering and intrinsic attenuation coefficients in the Earth.

Bulletin of the Seismological Society of America↗
USGS1989

Multichannel seismic-reflection profiles collected in 1979 aboard M/V Seismic Explorer on the western Florida shelf

In August 1979, the U.S. Geological Survey (USGS) aboard the M/V SEISMIC EXPLORER of Seismic Explorations International (SEI), ran 17 lines (1,270 km) of multichannel, seismic-reflection profiles on the western Florida Shelf. The main features of the SEI system were (1) a digital recorder with an instantaneous-floating-point-gain constant of 24 dB, (2) a 64-channel hydrophone streamer, 3,200 m long, and (3) a 21-airgun array that had a total volume of 2,000 in and a pressure of 2,000 psi. Sampling interval was array to the center of the farthest phone group was 3,338 m and to the nearest phone group, 188 m. Shot points were 5O m apart to obtain a 32-fold stack. Navigation was by an integrated satellite/Loran/doppler-sonar system. The SEI data were processed by Geophysical Data Processing Center, Inc. of Houston, Texas. Processing procedures were standard with the following exceptions: (1) a deringing deconvolution that had a 128-ms operator length was done prior to stacking. (2) a time-variant predictive deconvolution that had a filter operator length of 100 ms and automatic picking of the second zero-crossing was applied after stacking to further suppress multiple energy. (3) Velocity analyses were performed every 3 km, using a technique that included the determination and consideration of both the amount and direction of apparent dip. (4) Automatic gain ranging using a 750-ms window was applied pre- and post-stack. ( 5) Lines affected by sea floor's angle of slope were deconvolved again before stacking and time-variant filter parameters were adjusted to follow the sea-floor geometry. The data taken with the 3,200-m streamer and 2,000 in 3 airgun array, aboard M/V SEISMIC EXPLORER (Arabic numerals) are vastly superior to those obtained by R/V GYRE using a much smaller streamer and source (Roman numerals). The former consistently show coherent primary events from within the units underlying the Mesozoic section on the western Florida Shelf, while the latter tend to do so only in the inshore area where pre-Mesozoic basement occurs at depths of less than 2 km. The R/V GYRE data were open filed previously (Ball and others, 1987). A synthesis of both sets of data is included in Ball and others (1988). Reflectors correlate to the full 8-s duration of recording time. A number of lines were restarted due to equipment failure; no areas were omitted, however, shotpoints overlap. The original records may be seen at the USGS branch of Atlantic marine geology offices in Woods Hole, Mass. Copies of the multichannel data may be purchased only from the National Geophysical Data Center, NOAA, Code E64, 325 Broadway, Boulder, CO 80303 (tel. 303/497-6345).

Open-File Report↗
USGS2014

Dispersion analysis of passive surface-wave noise generated during hydraulic-fracturing operations

Surface-wave dispersion analysis is useful for estimating near-surface shear-wave velocity models, designing receiver arrays, and suppressing surface waves. Here, we analyze whether passive seismic noise generated during hydraulic-fracturing operations can be used to extract surface-wave dispersion characteristics. Applying seismic interferometry to noise measurements, we extract surface waves by cross-correlating several minutes of passive records; this approach is distinct from previous studies that used hours or days of passive records for cross-correlation. For comparison, we also perform dispersion analysis for an active-source array that has some receivers in common with the passive array. The active and passive data show good agreement in the dispersive character of the fundamental-mode surface-waves. For the higher mode surface waves, however, active and passive data resolve the dispersive properties at different frequency ranges. To demonstrate an application of dispersion analysis, we invert the observed surface-wave dispersion characteristics to determine the near-surface, one-dimensional shear-wave velocity.

Journal of Applied Geophysics↗
USGS2010

Rayleigh-wave phase-velocity maps and three-dimensional shear velocity structure of the western US from local non-plane surface wave tomography

We utilize two-and-three-quarter years of vertical-component recordings made by the Transportable Array (TA) component of Earthscope to constrain three-dimensional (3-D) seismic shear wave velocity structure in the upper 200 km of the western United States. Single-taper spectral estimation is used to compile measurements of complex spectral amplitudes from 44 317 seismograms generated by 123 teleseismic events. In the first step employed to determine the Rayleigh-wave phase-velocity structure, we implement a new tomographic method, which is simpler and more robust than scattering-based methods (e.g. multi-plane surface wave tomography). The TA is effectively implemented as a large number of local arrays by defining a horizontal Gaussian smoothing distance that weights observations near a given target point. The complex spectral-amplitude measurements are interpreted with the spherical Helmholtz equation using local observations about a succession of target points, resulting in Rayleigh-wave phase-velocity maps at periods over the range of 18–125 s. The derived maps depend on the form of local fits to the Helmholtz equation, which generally involve the nonplane-wave solutions of Friederich et al. In a second step, the phase-velocity maps are used to derive 3-D shear velocity structure. The 3-D velocity images confirm details witnessed in prior body-wave and surface-wave studies and reveal new structures, including a deep (>100 km deep) high-velocity lineament, of width ∼200 km, stretching from the southern Great Valley to northern Utah that may be a relic of plate subduction or, alternatively, either a remnant of the Mojave Precambrian Province or a mantle downwelling. Mantle seismic velocity is highly correlated with heat flow, Holocene volcanism, elastic plate thickness and seismicity. This suggests that shallow mantle structure provides the heat source for associated magmatism, as well as thinning of the thermal lithosphere, leading to relatively high stress concentration. Our images also confirm the presence of high-velocity mantle at 100 km depth beneath areas of suspected mantle delamination (southern Sierra Nevada; Grande Ronde uplift), low velocity mantle underlying active rift zones, and high velocity mantle associated with the subducting Juan de Fuca plate. Structure established during the Proterozoic appears to exert a lasting influence on subsequent volcanism and tectonism up to the Present.

Geophysical Journal International↗
USGS1983

Deep structure of northern Mississippi embayment

In September 1980, the U. S. Geological Survey conducted a seismic refraction investigation of the northern Mississippi Embayment. During the investigation, 34 shots from nine shotpoints were recorded along a series of profiles. The profiles were parallel to and across an inferred Precambrian rift zone which is outlined by a series of magnetic anomalies and covers an area at least 200 km (125 mi) long and 70 km (45 mi) wide. The paper presents an interpretation of the survey results. The tectonic model proposed to explain the origin of the embayment velocity structure includes a late Precambrian mantle plume that intruded the lower crust of the northern embayment, causing uplift (and/or crustal stretching) and subsequent rifting of the axial area. This was followed by erosion, subsidence, and subsequent deposition of sediments in the resulting trough.

Northern Mississippi embayment↗
USGS2012

Validation of ground-motion simulations for historical events using SDoF systems

The study presented in this paper is among the first in a series of studies toward the engineering validation of the hybrid broadband ground‐motion simulation methodology by Graves and Pitarka (2010). This paper provides a statistical comparison between seismic demands of single degree of freedom (SDoF) systems subjected to past events using simulations and actual recordings. A number of SDoF systems are selected considering the following: (1) 16 oscillation periods between 0.1 and 6 s; (2) elastic case and four nonlinearity levels, from mildly inelastic to severely inelastic systems; and (3) two hysteretic behaviors, in particular, nondegrading–nonevolutionary and degrading–evolutionary. Demand spectra are derived in terms of peak and cyclic response, as well as their statistics for four historical earthquakes: 1979 M w 6.5 Imperial Valley, 1989 M w 6.8 Loma Prieta, 1992 M w 7.2 Landers, and 1994 M w 6.7 Northridge.

Bulletin of the Seismological Society of America↗
USGS2007

Cenozoic environmental changes along the East Antarctic continental margin inferred from regional seismic stratigraphy

We interpret ~40,000 km of multichannelseismic reflection lines collected by the Russian Antarctic Expedition along the East Antarctic continental margin between 32&deg; E and 115&deg; E, and present a revised seismic stratigraphic model for depositional paleoenvironments of the region. Variations in acoustic facies characteristics observed across major seismic horizons are correlated with paleoenvironmental changes deciphered from Antarctic drilling data and deep-sea “proxy” records. Our results, as well as otherstudies, indicate that the East Antarctic margin was glaciated at different times. Glacial ice first reached the western Wilkes Land margin in the Middle Eocene and then advanced onto most parts ofthe East Antarctic continentalshelf during the earliest Oligocene. During the Neogene, bottom currents deposited a variety of drift deposits along the margin

Open-File Report↗
USGS1979

Seismic studies at the Mt. Hood Volcano, northern Cascade Range, Oregon

A sixteen station telemetered seismic network was established in the Mt. Hood, Oregon area to monitor local seismicity and to study crustal and upper mantle structure. The network was in operation 13 months, and recorded 10 local earthquakes, 25 regional events, and 300 teleseisms. A series of construction blasts were recorded and used to define an average upper crustal velocity of 5.4 km/s in the region. All local earthquakes occurred beneath Mt. Hood at shallow depths and roughly define a zone striking north-northwest beneath the mountain. The largest earthquake was a magnitude 3.4 event which had a strike-slip focal mechanism. The other events had magnitudes (ML) less than 2.0. P-wave travel time residuals from teleseismic events show a 0.5 second decrease in travel time from east to west across the Cascade Range. No travel time anomalies are associated directly with Mt. Hood.

Open-File Report↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS2020

Seismicity induced by massive wastewater injection near Puerto Gaitán, Colombia

Seven years after the beginning of a massive wastewater injection project in eastern Colombia, local earthquake activity increased significantly. The field operator and the Colombian Geological Survey immediately reinforced the monitoring of the area. Our analysis of the temporal evolution of the seismic and injection data together with our knowledge of the geological parameters of the region indicate that the surge of seismicity is being induced by the re-injection of produced water into the same three producing reservoirs. Earthquake activity began on known faults once disposal rates had reached a threshold of ∼2 × 10 6 m 3 of water per month. The average reservoir pressure had remained constant at 7.6 MPa after several years of production, sustained by a large, active aquifer. Surface injection pressures in the seismically active areas remain below 8.3 MPa, a value large enough to activate some of the faults. Since faults are mapped throughout the region and many do not have seismicity on them, we conclude that the existence of known faults is not the only control on whether earthquakes are generated. Stress conditions of these faults are open to future studies. Earthquakes are primarily found in four clusters, located near faults mapped by the operator. The hypocentres reveal vertical planes with orientations consistent with focal mechanisms of these events. Stress inversion of the focal mechanisms gives a maximum compression in the direction ENE-WSW, which is in agreement with borehole breakout measurements. Since the focal mechanisms of the earthquakes are consistent with the tectonic stress regime, we can conclude that the seismicity is resulting from the activation of critically stressed faults. Slip was progressive and seismic activity reached a peak before declining to few events per month. The decline in seismicity suggests that most of the stress has been relieved on the main faults. The magnitude of a large majority of the recorded earthquakes was lower than 4, as the pore pressure disturbance did not reach the mapped large faults whose activation might have resulted in larger magnitude earthquakes. Our study shows that a good knowledge of the local fault network and conditions of stress is of paramount importance when planning a massive water disposal program. These earthquakes indicate that while faults provide an opportunity to dispose produced water at an economically attractive volume–pressure ratio, the possibility of induced seismicity must also be considered.

Puerto Gaitan↗