Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

Hyperspectral Thermal Emission Spectrometer (HyTES) images of basaltic and sedimentary deposits in the southwest Cima volcanic field, California

The southwestern part of the Cima volcanic field in the Mojave National Monument, California, contains many of the youngest basaltic cinder cones and lava flows in the field (Wilshire and others, 2002). In 2014 the Hyperspectral Thermal Emission Spectrometer (HyTES) collected a swath of data across this area. This summary describes the HyTES instrument, data, and images, and compares two standard images to the geologic map and aerial photographs. In aerial photographs (visible spectrum) and HyTES images (thermal infrared spectrum), there are very good correlations of features such as pahoehoe and a`a flows (smoother or rougher surfaces, respectively), channelized features such as levees and flow-induced arcuate ridges across the channels, some flows with rafted parts of the source cinder cone, and different types of sedimentary deposits. The comparison is visual and qualitative; however, it shows the potential for applying hyperspectral data in a quantitative characterization and identification of lava flows and cones, sedimentary deposits, and locally exposed bedrock gneiss.

California↗

Computer-composite mapping for geologists

A computer program for overlaying maps has been tested and evaluated as a means for producing geologic derivative maps. Four maps of the Sugar House Quadrangle, Utah, were combined, using the Multi-Scale Data Analysis and Mapping Program, in a single composite map that shows the relative stability of the land surface during earthquakes. Computer-composite mapping can provide geologists with a powerful analytical tool and a flexible graphic display technique. Digitized map units can be shown singly, grouped with different units from the same map, or combined with units from other source maps to produce composite maps. The mapping program permits the user to assign various values to the map units and to specify symbology for the final map. Because of its flexible storage, easy manipulation, and capabilities of graphic output, the composite-mapping technique can readily be applied to mapping projects in sedimentary and crystalline terranes, as well as to maps showing mineral resource potential. ?? 1980 Springer-Verlag New York Inc.

Environmental Geology↗

Relations between geological structure and aeromagnetic anomalies in central Nevada

An aeromagnetic survey of a 6000-km 2 area in central Nevada has been complied by the U.S. Geological Survey. An interpretation of the aeromagnetic data is developed to establish relations between near-surface geological features and structure extending to intermediate depths in the crust. A three-dimensional distribution of magnetized material is described which would reproduce approximately the observed aeromagnetic anomalies. Anomaly sources extend from the surface to depths exceeding 15 km and require values of magnetic moment per unit volume averaging more than 2000 × 10 −6 (cgs). Magnetic anomaly lineations were analyzed by two methods. The first involves digital fan filtering and subsequent autocovariance computations. This method is sensitive to amplitude of linear anomalies, and indicated a dominant north-northwest trend with approximately 80 percent of the anomaly trend power in an azimuth range of northwest to northeast. The second method involves preparation of rosettes from measured lengths and azimuths of lineations indicated by noses and flexures on the contoured map. This method is not sensitive to anomaly amplitude. The dominant N. 10°E. trend determined in this way is indicative of the effect of near-surface geological structure on the magnetic field. The dominant north-northwest-trending zone of magnetic anomalies is located along an alinement of windows through the Roberts Mountains thrust fault. This suggests that elongate doming of the Paleozoic sedimentary rocks associated with the thrust may be related to emplacement of magnetic anomaly source material, and implies that this has been a zone of recurring tectonic activity since late Paleozoic time. Analysis of stresses possibly associated with forceful injection of magnetic anomaly sources and possible shear deformation along this north-northwest-trending zone suggests that these factors may have had a secondary influence on azimuths of high-angle faults and dikes.

Nevada↗

Structure and development of the Southeast Georgia Embayment and northern Blake Plateau: Preliminary analysis

Multichannel seismic reflection profiles from the Southeast Georgia Embayment and northern Blake Plateau show reflectors that have been correlated tentatively with horizons of known age. The top of the Cretaceous extends smoothly seaward beneath the continental shelf and Blake Plateau, unaffected at the present shelf edge. A reflector inferred to correspond approximately to the top of the Jurassic section onlaps and pinches out against rocks below. A widespread smooth reflector probably represents a volcanic layer of Early Jurassic age that underlies only the northwestern part of the research area. A major unconformity beneath the inferred volcanic layer is probably of Late Triassic or Early Jurassic age. This unconformity dips rather smoothly seaward beneath the northern Blake Plateau, but south of a geological boundary near 31°N, it has subsided much more rapidly, and reaches depths of more than 12 km. Development of the continental margin north of the boundary began with rifting and subsidence of continental basement in the Triassic. An episode of volcanism may have been due to stresses associated with a spreading center jump at about 175 million years ago. Jurassic and Cretaceous deposits form an onlapping wedge above the inferred early Jurassic volcanics and Triassic sedimentary rocks. During Cenozoic times, development of Gulf Stream flow caused a radical decrease in sedimentation rates so that a shelf that was much narrower than the Mesozoic shelf was formed by progradation against the inner edge of the stream. South of the 31°N geological boundary, the basement probably is semi-oceanic and reef growth, unlike that in the area to the north, has been very active at the outer edge of the plateau.

Blake Plateau, Southeast Georgia Embayment↗

Origin of late dolomite cement by CO2-saturated deep basin brines: evidence from the Ozark region, central United States

Studies of fluid inclusions in regionally extensive late dolomite cement (LDC) throughout the Ozark region show that CO 2 effervescence was widespread during dolomite precipitation. On the basis of quantitative analyses of inclusion fluids, reaction-path modeling shows that LDC with trace amounts of sulfides can be deposited by effervescence of a CO 2 -saturated basin brine as it migrates to shallower levels and lower confining pressures. This precipitation mechanism best explains occurrences of LDC in the Ozark region and may account for LDC found in sedimentary basins worldwide.

Geology↗

Sediment-hosted lead-zinc deposits in Earth history

Sediment-hosted Pb-Zn deposits can be divided into two major subtypes. The first subtype is clastic-dominated lead-zinc (CD Pb-Zn) ores, which are hosted in shale, sandstone, siltstone, or mixed clastic rocks, or occur as carbonate replacement, within a CD sedimentary rock sequence. This subtype includes deposits that have been traditionally referred to as sedimentary exhalative (SEDEX) deposits. The CD Pb-Zn deposits occur in passive margins, back-arcs and continental rifts, and sag basins, which are tectonic settings that, in some cases, are transitional into one another. The second subtype of sediment-hosted Pb-Zn deposits is the Mississippi Valley-type (MVT Pb-Zn) that occurs in platform carbonate sequences, typically in passive-margin tectonic settings. Considering that the redox state of sulfur is one of the major controls on the extraction, transport, and deposition of Pb and Zn at shallow crustal sites, sediment-hosted Pb-Zn ores can be considered a special rock type that recorded the oxygenation of Earth’s hydrosphere. The emergence of CD and MVT deposits in the rock record between 2.02 Ga, the age of the earliest known deposit of these ores, and 1.85 to 1.58 Ga, a major period of CD Pb-Zn mineralization in Australia and India, corresponds to a time after the Great Oxygenation Event that occurred at ca 2.4 to 1.8 Ga. Contributing to the abundance of CD deposits at ca 1.85 to 1.58 Ga was the following: (1) enhanced oxidation of sulfides in the crust that provided sulfate to the hydrosphere and Pb and Zn to sediments; (2) development of major redox and compositional gradients in the oceans; (3) first formation of significant sulfate-bearing evaporites; (4) formation of red beds and oxidized aquifers, possibly containing easily extractable Pb and Zn; (5) evolution of sulfate-reducing bacteria; and (6) formation of large and long-lived basins on stable cratons. Although MVT and CD deposits appeared for the first time in Earth history at 2.02 Ga, only CD deposits were important repositories for Pb and Zn in sediments between the Great Oxygenation Event, until after the second oxidation of the atmosphere in the late Neoproterozic. Increased oxygenation of the oceans following the second oxidation event led to an abundance of evaporites, resulting oxidized brines, and a dramatic increase in the volume of coarse-grained and permeable carbonates of the Paleozoic carbonate platforms, which host many of the great MVT deposits. The MVT deposits reached their maximum abundance during the final assembly of Pangea from Devonian into the Carboniferous. This was also a time for important CD mineral deposit formation along passive margins in evaporative belts of Pangea. Following the breakup of Pangea, a new era of MVT ores began with the onset of the assembly of the Neosupercontinent. A significant limitation on interpreting the secular distribution of the deposits is that there is no way to quantitatively evaluate the removal of deposits from the rock record through tectonic recycling. Considering that most of the sedimentary rock record has been recycled, most sediment-hosted Pb-Zn deposits probably have also been destroyed by subduction and erosion, or modified by metamorphism and tectonism, so that they are no longer recognizable. Thus, the uneven secular distribution of sediment-hosted Pb-Zn deposits reflects the genesis of these deposits, linked to Earth’s evolving tectonic and geochemical systems, as well as an unknown amount of recycling of the sedimentary rock record.

Economic Geology↗

Geologic framework, regional aquifer properties (1940s-2009), and spring, creek, and seep properties (2009-10) of the upper San Mateo Creek Basin near Mount Taylor, New Mexico

The U.S. Geological Survey, in cooperation with the U.S. Forest Service, examined the geologic framework, regional aquifer properties, and spring, creek, and seep properties of the upper San Mateo Creek Basin near Mount Taylor, which contains areas proposed for exploratory drilling and possible uranium mining on U.S. Forest Service land. The geologic structure of the region was formed from uplift of the Zuni Mountains during the Laramide Orogeny and the Neogene volcanism associated with the Mount Taylor Volcanic Field. Within this structural context, numerous aquifers are present in various Paleozoic and Mesozoic sedimentary formations and the Quaternary alluvium. The distribution of the aquifers is spatially variable because of the dip of the formations and erosion that produced the current landscape configuration where older formations have been exhumed closer to the Zuni Mountains. Many of the alluvial deposits and formations that contain groundwater likely are hydraulically connected because of the solid-matrix properties, such as substantive porosity, but shale layers such as those found in the Mancos Formation and Chinle Group likely restrict vertical flow. Existing water-level data indicate topologically downgradient flow in the Quaternary alluvium and indiscernible general flow patterns in the lower aquifers. According to previously published material and the geologic structure of the aquifers, the flow direction in the lower aquifers likely is in the opposite direction compared to the alluvium aquifer. Groundwater within the Chinle Group is known to be confined, which may allow upward migration of water into the Morrison Formation; however, confining layers within the Chinle Group likely retard upward leakage. Groundwater was sodium-bicarbonate/sulfate dominant or mixed cation-mixed anion with some calcium/bicarbonate water in the study area. The presence of the reduction/oxidation-sensitive elements iron and manganese in groundwater indicates reducing conditions at some time or in some location(s) in most aquifers. Frequent detections of zinc in the alluvium aquifer may represent anthropogenic influences such as mining. Along the mesas in the upper San Mateo Creek Basin, springs that form various creeks, including El Rito and San Mateo Creeks, discharge from the basalt-cap layer and the upper Cretaceous sedimentary layers. Streamflow in El Rito and San Mateo Creeks flows down steep gradients near the mesas sustained by groundwater discharges, and this streamflow transitions to shallow groundwater contained within the valley alluvium through infiltration where the subsequent groundwater is restricted from downward migration by the shaly Menefee Formation. This shallow groundwater reemerges at seeps where the land surface has been eroded below the groundwater level. Spring- and creek-water samples contained small amounts of dissolved solutes, and seep water contained substantially larger amounts of dissolved solutes. The pH of water within the creeks was neutral to alkaline, and all locations exhibited well-oxygenated conditions, although typically at substantially less than saturated levels. Changes in the stable-isotope ratios of water between spring and summer samples indicate differences in source-water inputs that likely pertain to seasonal recharge sources. Results of the water-isotope analysis and geochemical modeling indicate little evaporation and chemical weathering at the spring and creek sites but stronger evaporation and chemical weathering by the time the water reaches the seep locations in the center of the upper San Mateo Creek Basin.

New Mexico↗

Sea-floor environments within Long Island Sound: A regional overview

Modern sea-floor sedimentary environments within the glaciated, topographically complex Long Island Sound estuary have been interpreted and mapped from an extensive collection of sidescan sonographs, bottom samples, and video-camera observations together with supplemental bathymetric, marine-geologic, and bottom-current data. Four categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition; coarsegrained bedload transport; sediment sorting and reworking; and fine-grained deposition. (1) Environments of erosion or nondeposition contain exposures of glacial drift, coarse lag deposits, and possibly bedrock and include sediments which range from boulder fields to gravelly coarse-to-medium sands. (2) Environments of coarse-grained bedload transport are mantled by sand ribbons and sand waves and contain mostly coarse-to-fine sands with only small amounts of mud. (3) Environments of sediment sorting and reworking comprise both uniform and heterogeneous sediment types and contain variable amounts of fine sand and mud. (4) Environments of fine-grained deposition are blanketed by muds and sandy muds. The patchy distribution of sedimentary environments within Long Island Sound reflects both regional and local changes in bottom processes. Regional changes are primarily the result of a strong, east-to-west decreasing gradient of bottom tidal-current speeds, coupled with the net (westward) estuarine bottom drift. The regional current regime has produced a westward succession of environments along the basin floor beginning with erosion or nondeposition at the narrow eastern entrance to the Sound, changing to an extensive area of coarse-grained bedload transport, passing into a contiguous band of sediment sorting, and ending with broad areas of fine-grained deposition in the central and western Sound. However, local changes in processes are superimposed on the regional conditions within the central and western parts of the basin and along the nearshore margins. Within the central and western basin, localized sedimentary environments are produced where the bottom flow is enhanced by, and interacts with, the bottom topography, whereas along the nearshore margins, they variously reflect wave-produced currents, the irregular bathymetry, the indented shoreline, and the proximal supply of sediments. Results from this study (1) confirm the high trapping efficiency of fine-grained sediments in the Sound, (2) suggest that fine-grained sediments accumulate at an average (regional) rate of 0.08 g/cm 2 /y , and (3) indicate that the postglacial delta in the eastern Sound was a significant source of fine-grained sediments now buried beneath depositional areas.

Connecticut, New York↗

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska↗

Can modeling the geologic record contribute to constraining the tectonic source of the AD 1755 Great Lisbon earthquake?

The precise location of the seismic source of 1755 CE Great Lisbon earthquake is still uncertain. The aim of this work is to use an onland sedimentary record in southern Portugal to test and validate seismic sources for the earthquake. To achieve this, tsunami deposit thicknesses from over 150 cores collected at Salgados in southern Portugal were compared to the results of a tsunami sediment transport model (Delft3D-FLOW) that simulates tsunami propagation, inundation, erosion, and deposition. Five different hypothetical seismic sources were modeled with varying bed roughness coefficients to assess how well they reproduced observed patterns of tsunami deposit thicknesses and dune. Modeled and observed historical tsunami arrival times were also used to test different earthquake sources. Based on these comparisons, three modeled earthquake sources were able to reproduce the observed data, suggesting they should be regarded as somewhat more likely sources for the 1755 earthquake in contrast to four other modeled sources. The fault closest to shore (Marquês de Pombal) yielded the best correlations between model and observations.

Lisbon↗

Subsurface and petroleum geology of the southwestern Santa Clara Valley ("Silicon Valley"), California

Gravity anomalies, historical records of exploratory oil wells and oil seeps, new organic-geochemical results, and new stratigraphic and structural data indicate the presence of a concealed, oil-bearing sedimentary basin beneath a highly urbanized part of the Santa Clara Valley, Calif. A conspicuous isostatic-gravity low that extends about 35 km from Palo Alto southeastward to near Los Gatos reflects an asymmetric, northwest-trending sedimentary basin comprising low-density strata, principally of Miocene age, that rest on higher-density rocks of Mesozoic and Paleogene(?) age. Both gravity and well data show that the low-density rocks thin gradually to the northeast over a distance of about 10 km. The thickest (approx 4 km thick) accumulation of low-density material occurs along the basin's steep southwestern margin, which may be controlled by buried, northeast-dipping normal faults that were active during the Miocene. Movement along these hypothetical normal faults may been contemporaneous (approx 17–14 Ma) with sedimentation and local dacitic and basaltic volcanism, possibly in response to crustal extension related to passage of the northwestward-migrating Mendocino triple junction. During the Pliocene and Quaternary, the normal faults and Miocene strata were overridden by Mesozoic rocks, including the Franciscan Complex, along northeastward-vergent reverse and thrust faults of the Berrocal, Shannon, and Monte Vista Fault zones. Movement along these fault zones was accompanied by folding and tilting of strata as young as Quaternary and by uplift of the modern Santa Cruz Mountains; the fault zones remain seismically active. We attribute the Pliocene and Quaternary reverse and thrust faulting, folding, and uplift to compression caused by local San Andreas Fault tectonics and regional transpression along the Pacific-North American Plate boundary. Near the southwestern margin of the Santa Clara Valley, as many as 20 exploratory oil wells were drilled between 1891 and 1929 to total depths as great as 840 m. At least one pump unit is still standing. Although no lithologic or paleontologic samples are available from the wells, driller's logs indicate the presence of thick intervals of brown shale and sandstone resembling nearby outcrops of the Miocene Monterey Formation. Small amounts of oil and gas were observed in several wells, but commercial production was never established. Oil from the Peck well in Los Gatos is highly biodegraded, contains biomarkers commonly found in oils derived from the Monterey Formation, and has a stable-C-isotopic (d13C) composition of –23.32 permil, indicating derivation from a Miocene Monterey Formation source rock. Preliminary calculations suggest that about 1 billion barrels of oil may have been generated from source rocks within the Monterey Formation in the deepest part of the subsurface sedimentary basin between Los Gatos and Cupertino. Most of this oil was probably lost to biodegradation, oxidation, and leakage to the surface, but some oil may have accumulated in as-yet-undiscovered structural and stratigraphic traps along the complex structural boundary between the Santa Clara Valley and the Santa Cruz Mountains. Although some of these undiscovered accumulations of oil may be of commercial size, future petroleum exploration is unlikely because most of the area is currently devoted to residential, recreational, commercial, and industrial uses.

California↗

Geology of the Mayagüez area, Puerto Rico

The Mayagüez area forms the southwestern corner of Puerto Rico , west of 67° W. and south of 18° 15' N. One-third of the 640 square kms is covered by thick alluvium. Unconformities separate a basal complex, two sequences of highly folded igneous and sedimentary rocks, and a younger sequence of gently dipping sedimentary rock. The basal Bermeja complex contains serpentinite, silicified porphyritic volcanic rock with some sedimentary rock, and minor spilite, amphibolitized spilite, and amphibolite. It is exposed chiefly in some anticlinal cores in southwestern Puerto Rico . Limestone, mudstone, andesite, and basalt form the older folded sequence. The Río Loco formation, bronzite andesite porphyry in part with pillow structures, was extruded perhaps in the Cenomanian. The Mayagüez group includes most of the rocks in southwestern Puerto Rico : the Yauco mudstone, Parguera limestone, Brujo limestone, Melones limestone, Maricao basalt, Sabana Grande andesite, and El Rayo volcanic rocks. The maximum possible age range is Turonian to Maestrichtian. The group ranges in thickness from about 800 m in the south to 3800 m in the north, and it varies in lithology from limestone in the south to mudstone and volcanic rock in the north, indicating a volcanic center to the north during that time. The second folded sequence contains andesitic volcanic rock, bedded tuff, and massive limestone. The San Germán formation (Maestrichtian) includes andesite, the Cabo Rojo agglomerate member, and the Cotui limestone member. The Jicara formation, massive limestone and bedded tuff, is Paleocene; there is one exposure of an unnamed ? Eocene marl. Post-Eocene limestone and conglomerate are also exposed in the area . The structure of the basement complex is obscured by its massiveness and by the cover of younger rocks. Two major deformations have affected the rocks of southwestern Puerto Rico since Cenomanian to Santonian time. In the Maestrichtian, the first of these formed folds with a N. 60° W. trend, asymmetric or overturned to the south. Near the south coast the folding of thin Mayagüez group rocks was probably influenced by trends in the Bermeja complex which caused deviations in the regional trends and also some overturning to the north. The San Germán formation, deposited unconformably on the eroded surface of the folded Mayagüez group, contains large allochthonous blocks of older and contemporaneous rocks. These blocks, up to 2 km by 1 km in exposure, were deposited by slumping or sliding due to gravity within and at the base and top of the San Germán formation near Lajas and San Germán. Most rocks in the blocks are extremely contorted and contain deformed Foraminifera. The San Germán and Jicara formations and perhaps the ?Eocene marls were deformed into gentle open folds trending east in the area covered by this report. Oligocene, Miocene, and younger sedimentary rocks have been tilted and uplifted. Large east-west left-lateral transcurrent faults cross the area , offsetting and offset by two sets of transverse faults (N. 45° E., N. 20° W.): most faults are probably Maestrichtian to Oligocene, although minor faulting has continued to the present. Dikes and sills of quartz diorite porphyry and mica-quartz dacite porphyry intrude the ?Maestrichtian San Germán formation and older units. A diorite plug cuts the Bermeja complex, and a granodiorite plug intrudes the Mayagüez group.

Puerto Rico↗

Eastern and central Montana as a possible source area of uranium

Geologic settings in central and eastern Montana and in a few places in southwestern Montana are similar to the settings in areas favorable for the occurrence of uranium deposits. Several areas in Montana seem especially favorable for the occurrence of uranium.The alkalic igneous rock province of central Montana is similar to the one of the Colorado Plateau. On the basis of this analogy, certain areas in Montana, where the lithology and (or) structure are considered favorable for the occurrence of uranium, are suggested for prospecting. Seleniferous plants, similar to those that are uranium indicators on the Colorado Plateau, might be used as an aid in prospecting for uranium provided that the seleniferous shale areas are taken into account.Uranium deposits, similar to those in North and South Dakota, may be found in Cretaceous and Tertiary sandstones, lignites, and low-grade coals of eastern Montana; also, the magnetite-bearing beds of certain Cretaceoussandstones may contain fossil placer deposits of radioactive black minerals. Theoccurrence of uranium in basal conglomerates, quartzites, and sandstones in Africa and Ontario suggests that similar basal sedimentary rocks in central Montana may contain uranium.Many of the radioactivity anomalies in Montana found from the air are closely associated with the Eagle sandstone; others are associated with Precambrian basement rocks, Upper Cretaceous and Lower Tertiary igneous rocks, or sedimentary rocks of Jurassic and Cretaceous age. Glacial cover and lack of outcrops locally may hinder prospecting for uranium.

Montana↗

Luminescence as a sediment tracer and provenance tool

Luminescence holds unique potential as a sediment tracer and provenance method. The tracer application of luminescence has key advantages including ease of measurement, relatively low cost, and applicability to geologically ubiquitous quartz and feldspar sand and silt. These advantages can help answer fundamental questions about geomorphology, sediment transport, sediment production, and the tectonic/climatic controls on source‐to‐sink sedimentary systems. There is a notable body of research on luminescence as a sediment tracer. These tracer methods range from identifying source locations based on unique luminescence characteristics, to observing changes in luminescence characteristics with transport, to using residual luminescence to infer rates of transport. Previous applications of luminescence include provenance and quantification of fluvial transport rate, tracing of coastal longshore drift, estimations of mixing rates in soil or sediment, and provenance of wind‐blown deposits. The few studies that compare luminescence methods with nonluminescence tracer methods show good agreement. However, more work is needed to test the application of luminescence tracers in sediments. Future research directions should focus on comparing luminescence‐based with nonluminescence tracer methods. Furthermore, research is needed on the effects of specific geomorphic processes on luminescence characteristics and residual doses. While there is significant potential for future research, luminescence is already a useful sediment tracer and provenance tool applicable to a wide range of geomorphic environments.

Reviews of Geophysics↗

Site response for Seattle and source parameters of earthquakes in the Puget Sound Region

We analyzed seismograms from 21 earthquakes ( M L 2.0-4.9) recorded by digital seismographs we deployed in urban Seattle to determine site response and earthquake stress drops. The seismometers were situated on a wide variety of geologic units, including artificial fill (e.g., Kingdome, Harbor Island), Pleistocene age soils (glacial till and outwash deposits of Seattle's hills), modified land (downtown Seattle, Space Needle), and Tertiary sedimentary rock. Two mainshock-aftershock sequences were recorded: the June 1997 Bremerton sequence (mainshock M L 4.9) and the February 1997 South Seattle sequence (mainshock M L 3.5), along with other events in the Puget Sound region. We developed a new inversion procedure to estimate site response, source corner frequencies, and seismic moments from the S -wave spectra. This inversion uses corner frequencies determined from spectral ratios of mainshock-aftershock pairs as constraints. The site responses found from the inversion are not relative to the rock site but are relative to an idealized site with a flat frequency response. The response of the rock site is also found from the inversion. The inversion results show high response for the sites on artificial fill, more moderate amplification for most sites on stiff Pleistocene soils or modified land, and low response for the rock site. Some sites display resonances, such as a strong 2-Hz resonance at our site near the Kingdome, which is caused by the surficial layers of fill and younger alluvium. The sites in West Seattle exhibit high amplification, even though they are on relatively stiff soils of glacial outwash. This may be partly caused by basin surface waves produced by conversion of incident S waves. This high response in West Seattle is consistent with damage reports from the 1949 ( m b 7.1) and 1965 ( m b 6.5) earthquakes. Stress-drop estimates for the events we recorded were generally low, between 0.4 and 25 bars, although some of the events may have had higher stress drops that could not be resolved because of the limited passband. We calculated a stress drop of 24 bars for the Bremerton mainshock and 10 bars for the South Seattle mainshock.

Washington↗

Gravity survey and interpretation of Fort Irwin and vicinity, Mojave Desert, California

In support of a hydrogeologic study of the groundwater resources on Fort Irwin, we have combined new gravity data with preexisting measurements to produce an isostatic residual gravity map, which we then separated into two components reflecting (1) the density distribution in the pre-Cenozoic basement complex and (2) the distribution of low-density Cenozoic volcanic and sedimentary deposits that lie on top of the basement complex. The second component was inverted to estimate the three-dimensional distribution of Cenozoic deposits by using constraints from geology, drillholes, and time-domain electromagnetic soundings. In most of the base, the Cenozoic deposits are no more than 300 m thick, except in the basins with more than 500 m of fill beneath Coyote Lake, Red Pass Lake, west of Nelson Lake, west of Superior Lake, Bicycle Lake, and in the vicinity of Nelson Lake.

California↗

Report on workshop to incorporate basin response in the design of tall buildings in the Puget Sound region, Washington

On March 4, 2013, the City of Seattle and the U.S. Geological Survey (USGS) convened a workshop of 25 engineers and seismologists to provide recommendations to the City for the incorporation of amplification of earthquake ground shaking by the Seattle sedimentary basin in the design of tall buildings in Seattle. The workshop was initiated and organized by Susan Chang, a geotechnical engineer with the City of Seattle Department of Planning and Development, along with Art Frankel and Craig Weaver of the USGS. C.B. Crouse of URS Corporation, Seattle made key suggestions for the agenda. The USGS provided travel support for most of the out-of-town participants. The agenda and invited attendees are given in the appendix. The attendees included geotechnical and structural engineers working in Seattle, engineers with experience utilizing basin response factors in other regions, and seismologists who have studied basin response in a variety of locations. In this report, we summarize the technical presentations and the recommendations from the workshop.

Washington↗

Ore controls at the Mahd adh Dhahab gold mine, Kingdom of Saudi Arabia

Mahd adh Dhahab is the largest of numerous ancient gold mines scattered through the Precambrian shield of Saudi Arabia and the only one with recent production. Free gold and silver, tellurides, pyrite, galena, sphalerite, and chalcopyrite are in and associated with quartz veins and quartz veinlet stockworks. Country rocks consist of a sequence of pyroclastic and transported pyroclastic rocks of the Halaban Group that are locally highly silicified and potassium-feldspathized. Two known ore zones occur in a north-trending zone of quartz veins and breccias, faults, alteration, and metallization approximately 400 m wide and 1,000 m long. The ancient and recent workings are located in the northern part of this zone, and a significant new discovery, the southern mineralized zone, is in the southern part. A potential resource of 1.1 million tons of 27 g/t Au and 73 g/t Ag ore is contained in the southern mineralized zone. Geologic setting of ore bodies is similar in both zones. Significant mineralization occurs only within altered and fractured agglomerate directly beneath a cap of fine-grained tuff and sedimentary rock where the layered rocks are cut by metalliferous quartz veins. Ore was localized by four interacting controls; depth, an impervious cap, metalliferous quartz veins and a receptive host rock.

Open-File Report↗