Search USGS⌕ Search

SEARCH · Search USGS

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS1997

Lignin phenols in sediments of Lake Baikal, Siberia: Application to paleoenvironmental studies

Sediments from three cores obtained from distinct depositional environments in Lake Baikal, Siberia were analyzed for organic carbon, total nitrogen and lignin phenol concentration and composition. Results were used to examine changes in paleoenvironmental conditions during climatic cycles of the late Quaternary (< 125 ka). Average organic carbon, and total nitrogen concentrations, atomic C/N ratios and organic carbon accumulation rates were significantly higher in the Holocene compared with the late Pleistocene, reflecting overall warmer temperatures and increased runoff during the Holocene. A Holocene maximum in organic carbon was observed at about 6 ka, and may represent the warmest wettest period of the Holocene. At one site (Academician Ridge) pronounced late Pleistocene maxima in organic carbon and biogenic silica were observed at about 80-85 ka, probably indicative of an interstadial period with enhanced aquatic productivity. Total sedimentary lignin phenol contents were generally lower in the late Pleistocene compared to the Holocene, but with several peaks in concentration during the late Pleistocene. These late Pleistocene peaks in total sedimentary lignin content (dated at about 80, 50 and 30 ka) directly precede or occur during peaks in sedimentary biogenic silica contents. These periods likely represent relatively warm interstadial times, with increased precipitation producing the observed increase in terrestrial runoff and aquatic productivity. Lignin phenol ratios (S/V, C/V and P/V) were used to examine changes in terrestrial vegetation type resulting from changes in paleoenvironmental conditions during the late Pleistocene. A degree of caution must be used in the interpretation of these ratios with regard to vegetation sources and paleoenvironmental conditions, because of potential compositional changes in lignin resulting from biodegradation. Nevertheless, results show that long glacial periods were characterized by terrestrial vegetation composed of a mix of non-woody angiosperm vegetation and minor gymnosperm forest. Shorter interstadial periods are defined by a change to dominant gymnosperm forest and were observed at about 80, 75, 63, 50 and 30 ka, ranging from about 2-6 kyr in duration. These interstadial periods of the late Pleistocene defined by lignin phenol ratios generally occur during longer periods of enhanced sedimentary biogenic silica content (about 10-15 ka in duration), providing corroborative evidence of these warm interstadial periods.Sediments obtained in Lake Baikal were analyzed for organic carbon, total nitrogen and lignin phenol composition and used to study changes in paleoenvironmental conditions during climatic cycles of the late Quaternary. The organic carbon, total nitrogen concentrations, atomic C/N ratios and organic carbon accumulation rates were higher in the Holocene showing overall warmer temperatures and increased runoff. Total lignin phenol contents were lower in the Pleistocene representing relatively warm interstadial times with increased precipitation, runoff and aquatic productivity. Lignin phenol was used to examine vegetation changes due to paleoenvironmental conditions and showed that long glacial periods were characterized by terrestrial vegetation.

Siberia↗
USGS2004

Tectonic framework and Late Cenozoic tectonic history of the northern part of Cyprus: Implications for earthquake hazards and regional tectonics

Located near the triple junction of the African, Arabia, and Eurasian Plate, Cyprus has had an active and complex neotectonic history, which includes devastating historical earthquakes. Investigations into the tectonic framework of the northern part of Cyprus provide important insights into regional tectonism of the Eastern Mediterranean and Middle East. The northern part of Cyprus is divided into two tectono-stratigraphic terranes, the boundary of which is the Ovgos fault zone. In the Middle Miocene, the Ovgos fault zone was a marine platform margin, which separated open-marine platform carbonates from deep-marine turbidites. Transpressive movement along easterly and northeasterly trending structures dominated the Late Miocene; deposition and preservation of Messinian evaporites occurred in grabens at intersections of these trends. N–S compression began in the Early Pliocene and produced contractional tectonism along east–west trends, including major thrusting of allochthonous rocks in the Kyrenia Range. Quaternary deformation has been dominated by strike-slip faults along northeast and northwest trends; movement during the Pleistocene occurred on several of these faults; Holocene movement is documented on one of these faults. A seismic hazard is implied for the Nicosia area because its proximity to the Quaternary faults. Since the Miocene, Cyprus has been continuously uplifted, but the tectonic setting is controversial, as some researchers invoke a subduction zone setting and others ascribe to a regime of strike-slip tectonics. Our neotectonic framework is consistent with a restraining bend model for Cyprus in a regional strike-slip regime.

Journal of Asian Earth Sciences↗
USGS2004

Active shortening of the Cascadia forearc and implications for seismic hazards of the Puget Lowland

Margin-parallel shortening of the Cascadia forearc is a consequence of oblique subduction of the Juan de Fuca plate beneath North America. Strike-slip, thrust, and oblique crustal faults beneath the densely populated Puget Lowland accommodate much of this north-south compression, resulting in large crustal earthquakes. To better understand this forearc deformation and improve earthquake hazard, assessment, we here use seismic reflection surveys, coastal exposures of Pleistocene strata, potential-field data, and airborne laser swath mapping to document and interpret a significant structural boundary near the City of Tacoma. This boundary is a complex structural zone characterized by two distinct segments. The northwest trending, eastern segment, extending from Tacoma to Carr Inlet, is formed by the broad (??? 11.5 km), southwest dipping (??? 11??-2??) Rosedale monocline. This monocline raises Crescent Formation basement about 2.5 km, resulting in a moderate gravity gradient. We interpret the Rosedale monocline as a fault-bend fold, forming above a deep thrust fault. Within the Rosedale monocline, inferred Quaternary strata thin northward and form a growth triangle that is 4.1 to 6.6 km wide at its base, suggesting ??? 2-3 mm/yr of slip on the underlying thrust. The western section of the >40-km-long, north dipping Tacoma fault, extending from Hood Canal to Carr Inlet, forms the western segment of the Tacoma basin margin. Structural relief on this portion of the basin margin may be several kilometers, resulting in steep gravity and aeromagnetic anomalies. Quaternary structural relief along the Tacoma fault is as much as 350-400 m, indicating a minimum slip rate of about 0.2 mm/yr. The inferred eastern section of the Tacoma fault (east of Carr Inlet) crosses the southern part of the Seattle uplift, has variable geometry along strike, and diminished structural relief. The Tacoma fault is regarded as a north dipping backthrust to the Seattle fault, so that slip on a master thrust fault at depth could result in movement on the Seattle fault, the Tacoma fault, or both.

Tectonics↗
USGS2018

Holocene surface rupture history of an active forearc fault redefines seismic hazard in Southwestern British Columbia, Canada

Characterizing the hazard associated with Quaternary‐active faults in the forearc crust of the northern Cascadia subduction zone has proven challenging due to historically low rates of seismicity, late Quaternary glacial scouring, and dense vegetation that often obscures fault‐related geomorphic features. We couple lidar topography with paleoseismic trenching across the Leech River Fault on southern Vancouver Island to produce the first detailed surface rupture history of an onland forearc fault in British Columbia, Canada. The results indicate that this fault produced three surface‐rupturing earthquakes in the last ∼9 kyr and is therefore capable of producing large (Mw>6) earthquakes in the future. We provide new constraints on the fault's length (∼130 km) and Holocene slip rate (≥0.2–0.3 mm/year) that, together with the earthquake ages, should be incorporated into new seismic hazard assessments and building code practices relevant to urban centers in southwestern British Columbia (Canada) and northwestern Washington State (United States).

British Columbia↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗
USGS2012

Seismicity and geometry of a 110‐km‐long blind thrust fault 1. The 1985 Kettleman Hills, California, earthquake

The August 4, 1985, Kettleman Hills earthquake was the third in a sequence of moderate shocks to occur beneath the northern half of a 110‐km‐long fold chain bounding the eastern California Coast Ranges. The 1982 M W =5.4 New Idria, 1983 M W =6.5 Coalinga, and 1985 M W =6.1 Kettleman Hills events define a southward progression of seismic activity beneath the fold. We use teleseismic waveforms, geodetic modeling, hypocenters relocated in a three‐dimensional velocity model, and subsurface structural data to investigate the Kettleman Hills earthquake. The main shock results from motion on a shallowly dipping thrust fault buried at ∼10 km depth. Aftershocks and coseismic fault slip extend 20 km along the fold axis, nearly the full extent of the Kettleman Hills North Dome anticline. Aftershocks occur primarily several kilometers in front of the fault tip and in the core of the anticline. The main shock and several foreshocks occurred at a 2‐km right step in the Quaternary fold axis, which also corresponds to the southern end of the 1983 Coalinga and northern end of the 1985 Kettleman Hills aftershock zones. From this we infer that the step in the fold is caused by an offset or tear in the underlying fault. The scalar seismic moment is 1.6 × 10 18 N m, consistent with the geodetic deformation, and the duration of rupture is 16 s, 3–4 times greater than for the average earthquake with this scalar moment. The slow rate of moment release provides an explanation for the low level of ground shaking and low local magnitude reported for the event. The peak of the geodetic uplift is located 5 km perpendicular to the Quaternary fold axis. We argue that the fault is propagating northeast into the undeformed San Joaquin Valley sediments and that the overlying fold is growing at about 0.5 mm/yr.

California↗
USGS2011

Cruise to the Chukchi Borderland, Arctic Ocean

Oceanography and geology were the principal focuses of the U.S. Geological Survey-sponsored expedition Arctic Summer West '92, which traveled to the eastern part of the Chukchi Borderland of the Amerasia Basin, western Arctic Ocean. The expedition took place from August 20 to September 25, 1992, aboard the Coast Guard cutter Polar Star . USGS investigated the geologic framework and tectonic origin of the borderland, Arctic Quaternary paleoclimate, sea-ice transport of particulate matter in the Beaufort Gyre, and possible radionuclide contamination of the water column and seafloor off Alaska from sources in the Russian Arctic. Researchers from five other institutions studied the area's oceanography, age of the water column, paleoenvironment of the Holocene sediment, physical properties and synthetic-aperture radar backscatter of sea ice, and the drop-stone content of late Quaternary sediment.

Eos, Earth and Space Science News↗
USGS2010

Strike-slip faulting at Thebes Gap, Missouri and Illinois; implications for New Madrid tectonism

Numerous NNE and NE striking strike-slip faults and associated normal faults, folds, and transtensional grabens occur in the Thebes Gap area of Missouri and Illinois. These structures developed along the northwestern margin of the buried Reelfoot rift of Precambrian-Cambrian age at the northern edge of the Mississippi embayment. They have had a long-lived and complex structural history. This is an area of recent moderate seismicity, approximately 45 km north of the New Madrid seismic zone. Stratigraphic evidence suggests that these faults were active during the Middle Ordovician. They were subsequently reactivated between the Early Devonian and Late Cretaceous, probably in response to both the Acadian and Ouachita orogenies. Deformation during this period was characterized by strongly faulted and folded Ordovician through Devonian rocks. In places, these deformed rocks are overlain with angular unconformity by undeformed Cretaceous strata. Fault motion is interpreted as dominantly strike slip. A still younger period of reactivation involved Late Cretaceous and Cenozoic formations as young as the Miocene or Pliocene Mounds Gravel. These formations have experienced both minor high-angle normal faulting and subsequent major, right-lateral strike-slip faulting. En echelon north-south folds, ENE striking normal faults, regional fracture patterns, and drag folds indicate the right-lateral motion for this major episode of faulting which predates deposition of Quaternary loess. Several nondefinitive lines of evidence suggest Quaternary faulting. Similar fault orientations and kinematics, as well as recent seismicity and proximity, clearly suggest a structural relationship between deformation at Thebes Gap and tectonism associated with the New Madrid area.

Tectonics↗
USGS1996

The 1992 M=7 Cape Mendocino, California, earthquake: Coseismic deformation at the south end of the Cascadia megathrust

We invert geodetic measurements of coseismic surface displacements to determine a dislocation model for the April 25, 1992, M = 7 Cape Mendocino, California, earthquake. The orientation of the model slip vector, which nearly parallels North America-Juan de Fuca relative plate convergence, and the location and orientation of the model fault relative to the offshore Cascadia megathrust, suggest that the 1992 Cape Mendocino earthquake is the first well-recorded event to relieve strain associated with the Cascadia subduction zone. We use data from three geodetic techniques: (1) the horizontal and vertical displacements of 13 monuments surveyed with the Global Positioning System, corrected for observed horizontal interseismic strain accumulation, (2) 88 section-elevation differences between leveling monuments, and (3) the uplift of 12 coastal sites observed from the die-off of intertidal marine organisms. Maximum observed displacements are 0.4 m of horizontal movement and 1.5 m of uplift along the coast. We use Monte Carlo techniques to estimate an optimal uniform slip rectangular fault geometry and its uncertainties. The optimal model using all the data resolves 4.9 m of slip on a 14 by 15 km fault that dips 28° SE. The fault extends from 1.5 to 8.7 km in depth and the main-shock hypocenter is close to the downdip projection of the fault. The shallowly dipping fault plane is consistent with the observed aftershock locations, and the estimated geodetic moment is 3.1 × 10 19 N m, 70% of the seismic moment. Other models that exclude leveling data collected in 1935 and 1942 are more consistent with seismological estimates of the fault geometry. If the earthquake is characteristic for this segment, the estimated horizontal slip vector compared with plate convergence rates suggests a recurrence interval of 140 years, with a 95% confidence range of 100–670 years. The coseismic uplift occurred in a region that also has high Quaternary uplift rates determined from marine terrace studies. If repeated ruptures of this southernmost segment of the Cascadia megathrust are responsible for the Quaternary uplift, a comparison of the coseismic uplift with coastal uplift rates suggests a recurrence interval of 200–400 years. Thus comparing horizontal and vertical coseismic to long-term deformation suggests a recurrence interval of about 100–300 years for M = 7 events at the south end of the Cascadia megathrust.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗
USGS2012

Paleoseismicity and neotectonics of the Cordillera Blanca fault zone, northern Peruvian Andes

The Cordillera Bianca fault zone is a major west dipping normal fault that bounds the west side of a 120- to 170-km-wide zone of active extension along the crest of the northern Peruvian Andes. The fault is approximately 210 km long and exhibits continuous geomorphic evidence of repeated late Pleistocene and Holocene displacements but has not been the source of historical or teleseismically recorded earthquakes. Trenching and mapping of fault scarps provide new information on earthquake recurrence, slip rate, timing of the most recent events, and Andean neotectonics. At Quebrada Queroccocha, 55 km from the south end of the zone, an 11,000- to 14,000-year-old moraine is displaced 12–15 m, and younger valley fill lacustrine and fluvial deposits are displaced 7.5–8 m. Scarp profiles, tectonic terraces, and trench exposures indicate five to seven scarp-forming earthquakes of 2–3 m per event during the past 11,000–14,000 years at this location. Considering uncertainties in the number of events and in the age of the displaced moraine, the average recurrence interval is estimated to be 2440±1060 years. Detrital charcoal from colluviums that predate and postdate the most recent event yielded ages of 2480±65 and 750+80 14 C years B.P., respectively, and stratigraphic relationships suggest that the event may be closer to the older date. The late Quaternary slip rate at Quebrada Queroccocha is 0.86–1.36 mm/yr and appears to be representative of much of the fault zone. At Pachma Bajo, located 30 km from the north end of the zone on a separate segment, displacement during each of the past two events was 2 to ≥ 3 m. The morphology of scarps in alluvial fan and debris flow deposits indicates recurrence intervals of about 1000–3000 years. Relationships between pre-Inca walls and faulted deposits suggest that 1500–2000 years have elapsed since the most recent event. Fault behavior parameters, particularly displacement per event and fault segment length, show that the Cordillera Bianca fault zone is similar to seismogenic normal faults that nucleate M 7–7½ earthquakes at depths of approximately 15 km. The Quebrada Queroccocha slip rate and analysis of other normal faults in the region suggest cumulative late Quaternary extensional strain rates of about 1–4 mm/yr across the complete zone of Andean crestal extension.

Journal of Geophysical Research Solid Earth↗
USGS2012

Morphology and growth history of Delgada Fan: Implications for the Neogene evolution of Point Arena Basin and the Mendocino Triple Junction

Long-range side scan (GLORIA) sonographs and seismic reflection data acquired during a survey of the western U.S. Exclusive Economic Zone in 1984, coupled with information from Deep Sea Drilling Project sites, provide new insights into the growth and evolution of the Delgada Fan. Construction of the fan commenced in the latest Miocene (∼6 Ma) following the filling of the Neogene Point Arena Basin. The fan presently covers more than 50×10 3 km 2 of the Pacific plate and contains approximately 15×10 3 km 3 of predominantly terrigenous detritus. The large size of the fan is incompatible with the small present-day supply of sediment to the canyon system. The GLORIA data show the Delgada Fan to be a hybrid-type fan, exhibiting characteristics of both elongate and radial fans. The morphology and volume of the fan, along with evidence for a decline in accumulation rates on the lower fan during the Quaternary period, suggest that the fan experienced an early growth phase (latest Miocene and Pliocene) characterized by relatively rapid progradation of elongate fan lobes followed by a period (Quaternary) of slower growth that has featured a shift of depocenters to sites closer to the canyons and a transition to distributary channels bordered by less prominent levees and overbank deposits. We examine the growth of Delgada Fan in relation to the Neogene evolution of the North American-Pacific plate boundary using a series of paleogeographic reconstructions based on recently published time displacement histories of the Mendocino triple junction (MTJ), the San Andreas fault (SAF), and the Pacific plate, upon which the fan rests. The time displacement curves for the SAF and the MTJ suggest that the MTJ and Mendocino Fracture Zone overtook and passed Point Arena Basin at about 10 Ma when the basin lay immediately southwest of the present San Francisco Bay area. We suggest that the MTJ joined the SAF at approximately that time and location, thus making the SAF the master fault in the transform system. This interpretation is compatible with evidence from seismic reflection profiles over the fan, which demonstrate that the fan and the canyon system and therefore Point Arena Basin have moved as a unit since the inception of fan growth (∼6–7 Ma). Point Arena Basin lay southwest of the San Francisco area at 10–12 Ma, and the passage of the MTJ caused the disruption of the forearc shelf and slope and the development of local uplifted and subsiding blocks. In particular, uplift of the “bay block” immediately east of the SAF may have provided the source area for the late Miocene sediments that filled Point Arena Basin and set the stage for the growth of Delgada Canyon and Fan system. The growth rate of the fan has decreased, and the style of deposition has changed as the system was tectonically transported to its present location adjacent to the small youthful drainages of the King Range.

Journal of Geophysical Research Solid Earth↗
USGS2012

A high-resolution seismic reflection/refraction study of the Chugach-Peninsular terrane boundary, southern Alaska

We present results from a high-resolution seismic refraction analysis of the shallow (approximately 2 km) crustal structure along the 107-km-long Trans-Alaska Crustal Transect Chugach reflection line in southern Alaska and a comparison with laboratory measurements of field samples. The refraction analysis includes the two-dimensional interpretation of several thousand first- and secondary-arrival travel times digitized from 1024-channel split-spread common shot gathers. The velocity model derived from this analysis better defines the location and geometry of terrane boundaries than does the normal incidence reflection section and agrees well with surface mapping of lithologies. Furthermore, the model predicts travel times within 100 ms of the reflection times recorded from the base of the Quaternary on the Chugach reflection section. Thicknesses of Quaternary deposits, with velocities between 1.1 and 2.0 km/s, correlate inversely with the quantity of observed lower crustal reflections on the Chugach section, suggesting that the presence or absence of these sediments in sufficient thickness exerted primary control on the quality of the deeper portion of the section. There is a significant velocity contrast between crystalline rocks across the Border Ranges fault (5.0 versus 5.6 km/s), the major contact between the Chugach and Peninsular terranes, in agreement with laboratory measurements of field specimens. In the Peninsular terrane the modeling indicates that an unnamed fault delimiting the southern flank of the Copper River Basin dips steeply northward at 50° and has about 1300 m of vertical offset. Laboratory measurements document a maximum velocity anisotropy of 20% for phyllitic schists of the Valdez Group in the Chugach terrane. In agreement with the observed E-W strike and near-vertical dip of the Valdez Group, we determined a significant (14%) velocity anisotropy for ray paths oriented N-S versus NE-SW.

Journal of Geophysical Research Solid Earth↗
USGS2012

Age estimates and uplift rates for late Pleistocene marine terraces: Southern Oregon portion of the Cascadia forearc

Interest in the Cascadia subduction zone has increased because recent investigations have suggested that slip along plates at certain types of convergent margins is characteristically accompanied by large earthquakes. In addition, other investigations have suggested that convergent margins can be broadly classified by the magnitude of their uplift rates. The authors generated new uranium series, amino acid, and stable isotope data for southern Oregon marine terrace fossils. These data, along with terrace elevations and two alternative estimates of sea level at the time of terrace formation, allow one to determine terrace ages and uplift rates. Uranium series analysis of fossil coral yields an age of 83 {plus minus} 5 ka for the Whisky Run terrace at Coquille Point in Bandon, Oregon. A combination of amino acid and oxygen isotope data suggest ages of about 80 and 105 ka for the lowest two terraces at Cape Blanco. These ages indicate uplift rates of 0.45-1.05 and 0.81-1.49 m/kyr for Coquille Point and Cape Blanco, respectively. In order to assess the utility of the southern Oregon uplift rates for predicting the behavior of the Cascadia subduction zone, the authors compared late Quaternary uplift rates derived from terrace data from subduction zones around the world. On the basis of this comparison the southern Oregon rates of vertical deformation are not usually high or low. Furthermore, late Quaternary uplift rates show little relationship to the type of convergent margin. In the case of the southern Oregon coast, variability in uplift rate probably reflects local structures in the overriding plate, and the rate of uplift cannot be used as a simple index of the potential for great earthquakes along the southern Cascadia subduction zone.

California, Oregon↗
USGS2012

Late Cenozoic volcanism, subduction, and extension in the Lassen region of California, southern Cascade Range

Some 537 volcanic vents younger than 7 Ma are identified and these are classified into five age intervals and five compositional categories based on SiO2 content. Maps of vents by age and composition illustrate regionally representative volcanic trends. By 2 Ma, the eastern limit of volcanism had contracted westward toward the late Quaternary arc. Late Quaternary volcanism is concentrated around and north of the silicic Lassen volcanic center. The belt of most recent volcanism (25-0 ka) has been active since at least 2 Ma. Most mafic volcanism is calcalkaline basalt and basaltic andesite. Normal faults and linear groups of vents are evidence of widespread crustal extension throughout most of the Lassen region. NNW orientation of maximum horizontal stress is indicated. The Lassen volcanic region is thought to occur above the subducting Gorda North plate but also within a broad zone of distributed extension that occurs in the North American lithosphere east and southeast of the present Cascadia subduction zone. The scarcity of volcanic rocks older than 7 Ma suggests that a more compressive lithospheric stress regime prior to the late Miocene extensional episode may have suppressed volcanism. -from Authors

Journal of Geophysical Research Solid Earth↗
USGS1983

Selective dissolution of siliceous microfossils observed in a box core from the north-east equatorial Pacific

A box core taken at 11??50.3??? N and 137??28.2??? W in the Central Pacific manganese nodule province was studied to determine the pattern of diatom and radiolarian preservation with depth in the sediment, as well as to observe downcore variations in clay mineralogy. We observed marked deterioration of the siliceous microfossils within the upper 30 cm of this sediment; over this depth interval the Quaternary diatoms disappear first, followed deeper downcore by the dissolution of Quaternary radiolarians. Tertiary microfossils in general were the most corrosion resistant, and the residual microfossil assemblage in the lower part of the core consisted of fragmented, robust Tertiary forms. Consequently, the apparent biostratigraphical age of the sediment appeared much greater than the age suggested by mineralogical and radioisotopic data. ?? 1983 Nature Publishing Group.

Nature↗
USGS2022

Simplifying complex fault data for systems-level analysis: Earthquake geology inputs for U.S. NSHM 2023

As part of the U.S. National Seismic Hazard Model (NSHM) update planned for 2023, two databases were prepared to more completely represent Quaternary-active faulting across the western United States: the NSHM23 fault sections database (FSD) and earthquake geology database (EQGeoDB). In prior iterations of NSHM, fault sections were included only if a field-measurement-derived slip rate was estimated along a given fault. By expanding this inclusion criteria, we were able to assess a larger set of faults for use in NSHM23. The USGS Quaternary Fault and Fold Database served as a guide for assessing possible additions to the NSHM23 FSD. Reevaluating available data from published sources yielded an increase of fault sections from ~650 faults in NSHM18 to ~1,000 faults proposed for use in NSHM23. EQGeoDB, a companion dataset linked to NSHM23 FSD, contains geologic slip rate estimates for fault sections included in FSD. Together, these databases serve as common input data used in deformation modeling, earthquake rupture forecasting, and additional downstream uses in NSHM development.

Scientific Data↗
USGS1999

Ten years of studies on Maryland's inner Continental Margin and coastal bays

During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analyses completed during the first four years, a late Quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian (oxygen-isotope stages 7 and/or 9) transgressive shelf sands. Overlying the Q1 unit, the Q2 unit is a 6-meter thick mud sequence of oxygen-isotope stage 5 (128-75 ka) age. Units Q3 and Q4 representing fluvial and leading edge estuarine deposits (oxygen-isotope stages 4, 3 and 2) filled numerous paleochannels that were incised into units Q2 and Q1. Modern trailing-edge transgressive shelf shoals (Unit Q5) discontinuously cap the sequence. The 5th and 6th years studies reported on the economic minerals of surficial and cored sediments. Vibracores collected off the Maryland's shelf during previous studies were analyzed for mineral types and abundances, weight percent of general size fractions, and heavy mineral (HM) content. Mineralogic maturity indices were compiled to correlate the THM and economic heavy minerals (EHM) abundances with position offshore, sediment type, and the indices themselves. For the 7th year, the Maryland Geological Survey re-examined geophysical records and lithological data originally collected by the Army Corps of Engineers to locate and assess beach fill borrow areas for the Ocean City Beach Replenishment Project. Data from 163 vibracores and over 300 kilometers of high-resolution seismic profile records collected off Ocean City, Maryland, supported the stratigraphic model developed by MGS during the first four years of the AASG-MMS program. The Maryland coastal bays became the focus of study during the 8th and 9th years during which seismic records, cores and surficial sediment were collected in Isle of Wight and Assawoman Bays. Shallow pretransgression surface was mapped, relating the existing streams to offshore paleochannels. The tenth year study focused on developing a repository for vibracores collected on Maryland's inner continental shelf.During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analysis completed during the first four years, a late quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian transgressive shelf sands.

Marine Georesources and Geotechnology↗