Search USGS⌕ Search

SEARCH · Search USGS

Results for “Engineering Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS2005

Joint analysis of visible and infrared images

Analysis of data combining daytime visible reflected, daytime IR emitted, and nighttime IR emitted images allows us to isolate the physical effects of topography, albedo, and thermal inertia. To a good approximation, these physical influences interact linearly so that maps showing topographic shading, albedo, and relative thermal inertia can be produced by simple algebraic manipulation of the co-registered images. The shading map resembles an airbrush, shaded relief portrayal of the surface, and can be used as the input for quantitative reconstruction of topography by photoclinometry (shape-fromshading). We demonstrate the method with imagery from the NASA 2001 Mars Odyssey Thermal Emission Imaging System (THEMIS), a dataset that could support mapping most of Mars in this way at 100 m resolution .

Photogrammetric Engineering and Remote Sensing↗
USGS2021

Geometry of obstacle marks at instream boulders-Integration of laboratory investigations and field observations

Obstacle marks are instream bedforms, typically composed of an upstream frontal scour hole and a downstream sediment accumulation in the vicinity of an obstacle. Local scouring at infrastructure (e.g. bridge piers) is a well‐studied phenomenon in hydraulic engineering, while less attention is given to the time‐dependent evolution of frontal scour holes at instream boulders and their geometric relations (depth to width, and length ratio). Furthermore, a comparison between laboratory studies and field observations is rare. Therefore, the morphodynamic importance of such scour features to fluvial sediment transport and morphological change is largely unknown. In this study, obstacle marks at boulder‐like obstructions were physically modelled in 30 unscaled process‐focused flume experiments (runtime per experiment ≥ 5760 min) at a range of flows (subcritical, clear‐water conditions, emergent and submerged water levels) and boundary conditions designed to represent the field setting (i.e. obstacle tilting, and limited thickness of the alluvial layer). Additionally, geometries of scour holes at 90 in‐situ boulders (diameter ≥ 1 m) located in a 50‐km segment of the Colorado River in Marble Canyon (AZ) were measured from a 1 m‐resolution digital elevation model. Flume experiments reveal similar evolution of local scouring, irrespective of hydraulic conditions, controlled by the scour incision, whereas the thickness of the alluvial layer and obstacle tilting into the evolving frontal scour hole limit incision. Three temporal evolution phases—(1) rapid incision, (2) decreasing incision, and (3) scour widening—are identified based on statistical analysis of spatiotemporal bed elevation time series. A quantitative model is presented that mechanistically predicts enlargement in local scour length and width based on (1) scour depth, (2) the inclination of scour slopes, and (3) the planform area of the frontal scour hole bottom. The comparison of field observations and laboratory results demonstrates scale invariance of geometry, which implies similitude of processes and form rather than equifinality.

Earth Surface Processes and Landforms↗
USGS2019

Detection of rock bridges by infrared thermal imaging and modeling

Characterization of rock discontinuities and rock bridges is required to define stability conditions of fractured rock masses in both natural and engineered environments. Although remote sensing methods for mapping discontinuities have improved in recent years, remote detection of intact rock bridges on cliff faces remains challenging, with their existence typically confirmed only after failure. In steep exfoliating cliffs, such as El Capitan in Yosemite Valley (California, USA), rockfalls mainly occur along cliff-parallel exfoliation joints, with rock bridges playing a key role in the stability of partially detached exfoliation sheets. We employed infrared thermal imaging (i.e., thermography) as a new means of detecting intact rock bridges prior to failure. An infrared thermal panorama of El Capitan revealed cold thermal signatures for the surfaces of two granitic exfoliation sheets, consistent with the expectation that air circulation cools the back of the partially detached sheets. However, we also noted small areas of warm thermal anomalies on these same sheets, even during periods of nocturnal rock cooling. Rock attachment via rock bridges is the likely cause for the warm anomalies in the thermal data. 2-D model simulations of the thermal behavior of one of the monitored sheets reproduce the observed anomalies and explain the temperature differences detected in the rock bridge area. Based on combined thermal and ground-based lidar imaging, and using geometric and rock fracture mechanics analysis, we are able to quantify the stability of both sheets. Our analysis demonstrates that thermography can remotely detect intact rock bridges and thereby greatly improve rockfall hazard assessment.

California↗
USGS2006

An update of hydrologic conditions and distribution of selected constituents in water, Snake River Plain aquifer, Idaho National Laboratory, Idaho, Emphasis 1999-2001

Radiochemical and chemical wastewater discharged since 1952 to infiltration ponds, evaporation ponds, and disposal wells at the Idaho National Laboratory (INL) has affected water quality in the Snake River Plain aquifer underlying the INL. The U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, maintains ground-water monitoring networks at the INL to determine hydrologic trends, and to delineate the movement of radiochemical and chemical wastes in the aquifer. This report presents an analysis of water-level and water-quality data collected from wells in the USGS ground-water monitoring networks during 1999-2001. Water in the Snake River Plain aquifer moves principally through fractures and interflow zones in basalt, generally flows southwestward, and eventually discharges at springs along the Snake River. The aquifer is recharged principally from infiltration of irrigation water, infiltration of streamflow, ground-water inflow from adjoining mountain drainage basins, and infiltration of precipitation. Water levels in wells rose in the northern and west-central parts of the INL by 1 to 3 feet, and declined in the southwestern parts of the INL by up to 4 feet during 1999-2001. Detectable concentrations of radiochemical constituents in water samples from wells in the Snake River Plain aquifer at the INL generally decreased or remained constant during 1999-2001. Decreases in concentrations were attributed to decreased rates of radioactive-waste disposal, radioactive decay, changes in waste-disposal methods, and dilution from recharge. Tritium concentrations in water samples decreased as much as 8.3 picocuries per milliliter (pCi/mL) during 1999-2001, ranging from 0.43?0.14 to 13.6?0.6 pCi/mL in October 2001. Tritium concentrations in five wells near the Idaho Nuclear Technology and Engineering Center (INTEC) increased a few picocuries per milliliter from October 2000 to October 2001. Strontium-90 concentrations decreased or remained constant during 1999-2001, ranging from 2.1?0.6 to 42.4?1.4 pCi/L in October 2001. During 1999-2001, concentrations of cesium-137, plutonium-238, and plutonium-239, -240 (undivided) were less than the reporting level in water samples from all wells sampled at the INL. The concentration of americium-241 in one sample was 0.003?0.001 pCi/L, the reporting level for that constituent. Cobalt-60 was not detected in any samples collected during 1999-2001. Changes in detectable concentrations of nonradioactive chemical constituents in water from the Snake River Plain aquifer at the INL varied during 1999-2001. In October 2001, water from one well south of the Reactor Technology Complex (RTC) [known as the Test Reactor Area (TRA) until 2005] contained 139 micrograms per liter (?g/L) of chromium, a decrease from the concentration of 168 ?g/L detected in October 1998. Other water samples contained from less than 16.7 to 21.3 ?g/L of chromium. In October 2001, concentrations of sodium in water samples from most of the wells in the southern part of the INL were larger than the background concentration of 10 mg/L, but were similar to or slightly less than October 1998 concentrations. The largest sodium concentration was 75 milligrams per liter (mg/L) in water from well USGS 113. In 2001, chloride concentrations in most water samples from the INTEC and the Central Facilities Area (CFA) exceeded ambient concentrations of 10 and 20 mg/L, respectively. Chloride concentrations in water from wells near the RTC were less than 20 mg/L. At the Radioactive Waste Management Complex (RWMC), chloride concentrations in water from wells USGS 88, 89, and 120 were 81, 40, and 23 mg/L, respectively. Concentrations of chloride in all other wells near the RWMC were less than 19 mg/L. During 2001, concentrations of sulfate in water from two wells near the RTC, two wells near the RWMC, and one well near the CFA exceeded 40 mg/L, the estimated background concentration of sulfate in the Snake River

Scientific Investigations Report↗
USGS1991

Unified theory on power laws for flow resistance

Two general power formulas, one for hydraulically smooth flows and the other for fully rough flows, are derived in a rational way from the widely accepted logarithmic formulas for the velocity profile and the Darcy‐Weisbach friction factor. A regression analysis based on the method of least squares is used to determine the valid range of the local velocity (or normal distance from the wall) in the power formula. Some older empirical formulas, such as Lacey's, Manning's, Blasius', and Hazen‐Williams', and their valid ranges, are actually explained analytically by the results. Incomplete self‐similarity of the power law, in which the exponent and the associated coefficient vary with the similarity parameters, such as the Reynolds number and the relative roughness, is elucidated through the parametric representations of the power formulas and their counterparts based on the logarithmic law. This paper examines the concept and rationale behind the power formulation of uniform turbulent shear flows, thereby addressing some critical issues in the modeling of flow resistance based on the power law.

Journal of Hydraulic Engineering↗
USGS2005

An evaluation of the strong ground motion recorded during the May 1, 2003 Bingol Turkey, earthquake

An important record of ground motion from a M 6.4 earthquake occurring on May 1, 2003, at epicentral and fault distances of about 12 and 9 km, respectively, was obtained at a station near the city of Bingöl, Turkey. The maximum peak ground values of 0.55g and 36 cm/s are among the largest ground-motion amplitudes recorded in Turkey. From simulations and comparisons with ground motions from other earthquakes of comparable magnitude, we conclude that the ground motion over a range of frequencies is unusually high. Site response may be responsible for the elevated ground motion, as suggested from analysis of numerous aftershock recordings from the same station. The mainshock motions have some interesting seismological features, including ramps between the P- and S-wave that are probably due to near- and intermediate-field elastic motions and strong polarisation oriented at about 39 degrees to the fault (and therefore not in the fault-normal direction). Simulations of motions from an extended rupture explain these features. The N10E component shows a high-amplitude spectral acceleration at a period of 0.15 seconds resulting in a site specific design spectrum that significantly overestimates the actual strength and displacement demands of the record. The pulse signal in the N10E component affects the inelastic spectral displacement and increases the inelastic displacement demand with respect to elastic demand for very long periods.

Journal of Earthquake Engineering↗
USGS2023

Monitoring of wave, current, and sediment dynamics along the Chincoteague living shoreline, Virginia

Nature-based features, also called living shorelines, are increasingly applied in coastal protection and restoration. However, the processes and mechanisms (feedbacks and interactions) of wave attenuation, current velocity change, and sediment deposition and erosion along the living shoreline remain unclear, thus limiting the adaptive management of living shoreline restoration projects for coastal shoreline resilience under future storm conditions. In this study, wave, current, and sediment dynamics along the Little Toms Cove living shoreline, Chincoteague National Wildlife Refuge, Virginia, a low wave energy environment, were investigated during a 2-month winter period in 2019 to examine the effects of living shoreline structures on shoreline protection and oyster habitat enhancement. It was found that wave attenuation by the living shoreline structures (oyster castles or constructed oyster reefs) is dependent on water depth, wind speed, wind direction, and local bathymetry. Analysis of observed data indicate that the oyster castles along the Little Toms Cove living shoreline play a limited role in wave attenuation in this low wave energy environment. During the 2-month winter period, wave energy was attenuated by 39.7 percent when oyster castles were emergent or slightly submerged with southwest winds. In contrast, when the oyster castles were fully submerged, wave energy behind the oyster castles increased by 38.6 percent. The construction of oyster castles affected circulation patterns with increase or decrease in velocity at nearshore waters protected by the castles depending on locations of measurements in relation to the oyster castles. Bottom shear stress analysis indicates that tidal currents play a larger role than waves on shoreline and marsh edge erosion along the Little Toms Cove shoreline during the 2 months of field monitoring. The oyster castles protecting the marsh edge and tidal flat from erosion resulted in higher fine sediment concentration in the water column landward of the castles because more sediment was retained in the lee side of the castles. It is important to maximize sediment within the wetlands and adjacent mudflats behind the oyster castles. Erosion from the marsh edge and interior serves as the major source of sediment for this wetland system due to the limited sediment supply in Assateague Channel. Furthermore, it was found that the oyster castles along the Little Toms Cove living shoreline were inundated more than 60 percent of the time, leading to the enhanced oyster habitat as evidenced by suitable velocity (less than 10 centimeters per second) and mean grain size (less than 0.08 millimeters) for oyster feeding and the increased oyster shell density and growth in the intertidal zone protected by the castles than in the control area. More field data (for example, concurrent monitoring of sediment concentration and salinity) over other seasons (for example, summer) could help examine the long term and combined engineering and ecological benefits of living shoreline restoration projects under seasonal and enhanced future storm conditions.

Virginia↗
USGS2021

Incorporating water quality analysis into navigation assessments as demonstrated in the Mississippi River Basin

A description of historical and ambient water quality conditions is often required as part of navigational studies. This paper describes a series of tools developed by the USGS that can aid navigation managers in developing water quality assessments. The tools use R, a statistical software program, and provide methods to retrieve historical streamflow and water quality data, summarize observations, model concentrations and fluxes, and estimate seasonal, annual, and decadal trends. The utility of these tools is demonstrated by providing an analysis of the seasonal variability and long-term trends of nitrate plus nitrite, orthophosphate, and suspended sediment concentrations and fluxes at nine sites in the Mississippi River Basin. Trends in annual mean concentration and flux showed fairly stable nitrate plus nitrite at most of the nine sites, with increases in the Upper Mississippi and Missouri Rivers and decreases on the Illinois River over a 40-year period beginning in 1980. Orthophosphate concentration or flux increased at almost all sites over a similar time period. Conversely, a concurrent steady decline in suspended sediment concentrations and fluxes was noted at sites throughout the basin.

Mississippi River Basin↗
USGS2014

Examining change detection approaches for tropical mangrove monitoring

This study evaluated the effectiveness of different band combinations and classifiers (unsupervised, supervised, object-oriented nearest neighbor, and object-oriented decision rule) for quantifying mangrove forest change using multitemporal Landsat data. A discriminant analysis using spectra of different vegetation types determined that bands 2 (0.52 to 0.6 μm), 5 (1.55 to 1.75 μm), and 7 (2.08 to 2.35 μm) were the most effective bands for differentiating mangrove forests from surrounding land cover types. A ranking of thirty-six change maps, produced by comparing the classification accuracy of twelve change detection approaches, was used. The object-based Nearest Neighbor classifier produced the highest mean overall accuracy (84 percent) regardless of band combinations. The automated decision rule-based approach (mean overall accuracy of 88 percent) as well as a composite of bands 2, 5, and 7 used with the unsupervised classifier and the same composite or all band difference with the object-oriented Nearest Neighbor classifier were the most effective approaches.

Photogrammetric Engineering and Remote Sensing↗
USGS2016

Total dissolved gas and water temperature in the lower Columbia River, Oregon and Washington, water year 2015

Significant Findings An analysis of total-dissolved-gas (TDG) and water-temperature data collected at eight fixed monitoring stations on the lower Columbia River in Oregon and Washington in water year 2015 indicated the following: All but 1 of the 85 TDG sensor laboratory checks that were performed after field deployment were within ±0.5-percent saturation of a primary standard. After 3–4 weeks of deployment in the river, 79 of 89 TDG sensor field checks were within ±1.0-percent saturation of a secondary standard. Nine of the field checks greater than ±1.0-percent saturation occurred at the John Day Dam tailwater station and resulted in periods of deleted TDG data at the station. All 90 barometric pressure field checks were within ±1 millimeter of mercury of a primary stand-ard, and all 90 water-temperature field checks were within ±0.2 degrees Celsius of a secondary standard. TDG data were considered complete if received in real time and within 1-percent saturation of the expected value on the basis of calibration data, replicate quality-control measurements, and comparison to river conditions at adjacent stations. For the eight monitoring stations, data completeness ranged from 71.9 to 99.8 percent. All quality-assurance values exceed the criteria established by the U.S. Army Corps of Engineers TDG monitoring plan. Criteria for data completeness (95-percent) were met at seven of the eight monitoring stations. Deleted data at the John Day tailwater station resulted in data completeness below criteria.

Oregon, Washington↗
USGS2014

A velocimetric survey of the Lower Missouri River from river mile 492.38 to 290.20, July-October 2011 and July 2012

Velocimetric surveys were made by the U.S. Geological Survey in 2011 and 2012 to provide data for the U.S. Army Corps of Engineers’ ongoing study of bed degradation in the Lower Missouri River. Using Acoustic Doppler Current Profile technology, velocity data were collected at 87 river miles along the Lower Missouri River from Rulo, Nebraska to Waverly, Missouri, from July to October 2011 and in July 2012, for a total of 118 velocimetric surveys. Multiple-repeat velocimetric surveys were done eight times at three river miles from July to October 2011. Synoptic velocimetric surveys spanning 2–4 days were done twice at ten river miles, once in July 2011 and once in October 2011. Additional synoptic velocimetric surveys were done at proximal river miles in October 2011 and July 2012. Main-channel, near-bed, near-bank, and whole-river velocities were extracted from the Acoustic Doppler Current Profile data using AdMap and compiled as an average of reciprocal pairs for each survey. In addition, the mean velocity computed by the Winriver II software for each survey was integrated with the extracted data. Multiple-repeat velocimetric surveys in the vicinity of Kansas City and Waverly, Missouri, in 2011 indicated that main-channel, near-bed, near-bank, and whole-river velocities generally declined with respect to declining daily mean discharges at the St. Joseph and Waverly, Missouri streamgaging stations. Statistical analysis of the four extracted velocity types indicated that multiple-repeat velocimetric surveys were strongly correlated with daily mean discharges at nearby streamgaging stations (coefficient of determination greater than 0.75). Main-channel velocity exceeded whole-river velocity by an average of 25 percent at river mile 357.70, 22 percent at river mile 357.09, and 6.8 percent at river mile 290.20 for all velocimetric surveys at each location, respectively. Mainchannel, near-bed, near-bank, and whole-river velocities declined about 48 percent from July to October 2011 at the Kansas City sites and about 38 percent at the Waverly site. Winriver II mean velocity from multiple-repeat velocimetric surveys indicated that the relation between all velocities was inconsistent from July to October 2011. Percent changes in channel width from July to October 2011 were typically less than concurrent changes in channel area and instantaneous discharge. The combined synoptic and multiple-repeat survey data for July 2011 did not indicate a clear longitudinal trend of velocity as instantaneous discharge increased downstream. Main-channel velocity exceeded whole-river velocity by an average of 22 percent during July 2011 and in some cases by more than 40 percent (river miles 452.50 and 308.80). Evaluation of 10 pairs of synoptic and synoptic-repeat velocimetric surveys with multiple-repeat velocimetric surveys from July to October 2011 indicated that all velocity types and channel width decreased by about one-third. Channel area and instantaneous discharge decreased by more than 50 percent from July to October 2011 and the percent by which main-channel velocity exceeded whole-river velocity decreased slightly from 22 percent in July to 19 percent. Comparing high (July 2011) to low (October 2011) discharge, where the channel width and area expanded by a factor of nearly 3.0 or more at high discharge (river miles 492.38 to 452.50), main-channel, near-bed, near-bank, and whole-river velocities increased by factors in the range of 1.1 to 1.7 and Winriver II mean velocity decreased. At the Kansas City river miles, all velocity types and channel areas nearly doubled at high discharge and channel widths remained similar to those at low discharge. Multiple-repeat and synoptic velocimetric surveys evaluated in October 2011 indicated that main-channel, near-bed, nearbank, and whole-river velocities generally increased downstream from river miles 424.20 to 404.70 and then decreased, until river mile 290.20, where they increased slightly. Of the July 2012 synoptic velocimetric surveys, velocities near St. Joseph, Missouri, indicated no longitudinal trends in the main-channel, near-bed, near-bank, and whole-river velocities. The Kansas City and Waverly synoptic velocimetric surveys indicated a general decrease in these velocities proceeding downstream. For all 2012 surveys, near-bed velocity was closest in magnitude to Winriver II mean velocity and near-bed and whole-river velocities decreased with increasing channel area. For the entire study, variations in near-bank velocity may have been due to the influence of channel structures and their diversion of higher velocities away from the channel edges.

Missouri;Nebraska↗
USGS2015

Total dissolved gas and water temperature in the lower Columbia River, Oregon and Washington, water year 2014

Significant Findings An analysis of total-dissolved-gas (TDG) and water-temperature data collected at eight fixed monitoring stations on the lower Columbia River in Oregon and Washington in water year 2014 indicated the following: All 81 TDG sensor laboratory checks that were performed after field deployment were within plus or minus (±) 0.5-percent saturation of a primary standard. After 3-4 weeks of deployment in the river, 68 of 75 TDG sensor field checks were within ±1.0-percent saturation of a secondary standard. Six of the field checks greater than ±1.0-percent saturation occurred at the John Day tailwater station, and three of these six checks resulted in periods of deleted data at the station. All 77 barometric pressure field checks were within ±1 millimeter of mercury of a primary standard, and all 74 water-temperature field checks were within ±0.2 degrees Celsius of a secondary standard. TDG data were considered complete if they were received in real time and were within 1-percent saturation of the expected value on the basis of calibration data, replicate quality-control measurements, and comparison to river conditions at adjacent stations. For the eight monitoring stations, data completeness ranged from 78.2 to 100 percent. All quality-assurance values exceed the criteria established by the U.S. Army Corps of Engineers TDG monitoring plan. Criteria for data completeness (95 percent) were met at six of the eight monitoring stations. Deleted data at the John Day tailwater station and missed transmissions at the Camas station resulted in data completeness below criteria.

Oregon, Washington↗
USGS2012

Estimating shaking-induced casualties and building damage for global earthquake events: a proposed modelling approach

Recent earthquakes such as the Haiti earthquake of 12 January 2010 and the Qinghai earthquake on 14 April 2010 have highlighted the importance of rapid estimation of casualties after the event for humanitarian response. Both of these events resulted in surprisingly high death tolls, casualties and survivors made homeless. In the Mw = 7.0 Haiti earthquake, over 200,000 people perished with more than 300,000 reported injuries and 2 million made homeless. The Mw = 6.9 earthquake in Qinghai resulted in over 2,000 deaths with a further 11,000 people with serious or moderate injuries and 100,000 people have been left homeless in this mountainous region of China. In such events relief efforts can be significantly benefitted by the availability of rapid estimation and mapping of expected casualties. This paper contributes to ongoing global efforts to estimate probable earthquake casualties very rapidly after an earthquake has taken place. The analysis uses the assembled empirical damage and casualty data in the Cambridge Earthquake Impacts Database (CEQID) and explores data by event and across events to test the relationships of building and fatality distributions to the main explanatory variables of building type, building damage level and earthquake intensity. The prototype global casualty estimation model described here uses a semi-empirical approach that estimates damage rates for different classes of buildings present in the local building stock, and then relates fatality rates to the damage rates of each class of buildings. This approach accounts for the effect of the very different types of buildings (by climatic zone, urban or rural location, culture, income level etc), on casualties. The resulting casualty parameters were tested against the overall casualty data from several historical earthquakes in CEQID; a reasonable fit was found.

Bulletin of Earthquake Engineering↗
USGS1997

Regional landslide-hazard evaluation using landslide slopes, Western Wasatch County, Utah

Landsliding has historically been one of the most damaging geologic hazards in western Wasatch County, Utah. Accordingly, we mapped and analyzed landslides (slumps and debris slides) in the area to provide an empirical basis for regional landslide-hazard evaluation. The 336 landslides in the 250-sq-mi (650-km 2 ) area involve 20 geologic units, including Mississippian- to Quaternary-aged rock and unconsolidated deposits. Landsliding in western Wasatch County is characterized by a strong correlation between geologic material and landslide-slope inclination. From a simple statistical analysis of overall slope inclinations of late Holocene landslides, we determined “critical” slope inclinations above which late Holocene landsliding has typically occurred and used these as the primary basis for defining relative landslide hazard. The critical slopes vary for individual geologic units and range from 15 to 50 percent (9°–27°). The critical slope values and landslide locations were used in conjunction with geologic and slope maps to construct qualitative landslide-susceptibility maps for use by county planners. The maps delineate areas of low, moderate, and high relative hazard and indicate where studies should be completed prior to development to evaluate site-specific slope-stability conditions. Critical slopes as determined in this study provide a consistent empirical reference that is useful for evaluating relative landslide hazard and guiding land-use-planning decisions in large, geologically complex areas.

Utah↗
USGS2005

Upper Auglaize watershed AGNPS modeling project

The Upper Auglaize Watershed agricultural non-point source modeling project was an interagency effort to use a Geographic Information System (GIS)-based modeling approach for assessing and reducing pollution from agricultural runoff and other non-point sources. This project applied the U.S. Department of Agriculture (USDA), Agricultural Research Service’s AGricultural Non-Point Source (AGNPS) suite of models to the Upper Auglaize River Watershed, a major watershed within the Maumee River Basin. This modeling project was conducted by an interagency team consisting of a partnership between the: (1) USDA, Agricultural Research Service (ARS); (2) USDA, Natural Resources Conservation Service (NRCS); (3) U.S. Army Corps of Engineers (USACE); (4) U.S. Geological Survey (USGS); (5) Ohio State University; (6) University of Toledo (UT); (7) Heidelberg College; (8) Ohio Department of Natural Resources (ODNR), Division of Soil and Water Conservation; (9) Ohio Environmental Protection Agency (OEPA); and (10) Allen, Auglaize, Van Wert, and Putnam Soil and Water Conservation Districts. The partnership was the first step in a process to eventually apply the model in a portioned subset of watersheds for the Maumee Basin, and then to link them to form a comprehensive basin-wide model This work was performed under the authority of Section 516(e) of the Water Resources Development Act (WRDA) of 1996, as amended, for the purpose of assisting State and local watershed managers with their evaluation, prioritization and implementation of alternatives for soil conservation, sediment trapping and non-point source pollution prevention in the Upper Auglaize River watershed. The project team, working in a cooperative effort, used the models to determine sediment sources, contributing locations, and the effect of application of best management practices (BMPs) on rates of sediment delivery to the mouth of the watershed. The results will be used to guide conservation incentive and land treatment programs. The team relied heavily on Geographic Information System (GIS)-based applications to expedite the application of the model. The results of the analysis demonstrated that the application of BMPs would have a positive effect on reducing the loadings of sediment leaving the mouth of the Upper Auglaize Watershed. An application of 17 percent new no-till acres and eight percent new grassland acres, when randomly applied to the watershed, reduced loadings at the mouth to 82 percent of the simulated existing condition loadings. No-till, conversion of cropland to grassland, other uses including grass buffers, and reforestation of parts of the watershed, were all shown by the model to have a measurable effect on reducing sediment loads. Conversion of all of the cropland in the watershed to no-till would reduce the average unit load (tons of sediment per acre) leaving the mouth of the watershed to a level that is 42 percent of the simulated existing condition load. Ephemeral gullies were found to be the primary source of erosion (72 percent), sediment yield (73 percent), and sediment loading (73 percent). Controlling sediment load means controlling gully erosion and possibly trapping sediment yield before it reaches the stream system. Most BMPs (e.g., no-till, conversion of cropland, etc.) that reduce sheet and rill erosion and its sediment yield will also reduce gully erosion and its sediment yield. However, grassed waterways, which have no effect on sheet and rill erosion, are frequently an effective BMP to prevent ephemeral gullies. And, of course, riparian vegetation and sediment traps would reduce the delivery ratios of all types of landscape erosion. New techniques were developed by the team to quantify the ephemeral gully erosion within the model. When calibrated to available stream gage data the model suggests that more (73% in the existing condition simulation) of the sediment load originates from ephemeral gully erosion than from traditional sheet and rill erosion. The model quantified the value of tile drainage in reducing the sediment load from the watershed. Loadings under drained conditions were always less than loadings under undrained conditions for otherwise identical land uses. The average sediment load of all alternatives for drained loadings was 89.2 percent of the load for the corresponding undrained loadings. The model established that while many conservation incentive programs treat tile drainage as a production practice, significant erosion and sediment control benefits are provided by the practice in comparison to cultivation in an undrained state.

Ohio↗
USGS1999

Analysis of land use change in urban environments

Metropolitan areas in the United States are growing at unprecedented rates, creating extensive urban landscapes. Many of the farmlands, wetlands, forests, and deserts that formed the America of 1900 have been transformed during the past 100 years into human settlements. Almost everyone has seen these changes to their local environment but without a clear understanding of their impacts. It is not until we study these landscapes from a spatial perspective and the time scale of decades that we can begin to measure the changes that have occurred and predict the impact of changes to come. The U.S. Geological Survey's (USGS) Urban Dynamics Research (UDR) program studies the landscape transformations that result from the growth of metropolitan regions over time. Using sources such as historic maps, aerial photographs, and Landsat satellite data, USGS scientists first assemble retrospective urban land use databases that reflect several decades of change. These databases are then used to analyze the effects of urbanization on the landscape, and to model urban growth and land use change under alternative growth scenarios.

Fact Sheet↗
USGS2016

Status and trends of land change in selected U.S. ecoregions - 2000 to 2011

U.S. Geological Survey scientists developed a dataset of 2006 and 2011 land-use and land-cover ( LULC ) information for selected 100-km 2 sample blocks within 29 U.S. Environmental Protection Agency ( EPA ) Level III ecoregions across the conterminous United States. The data can be used with the previously published Land Cover Trends Dataset: 1973 to 2000 to assess landuse/land-cover change across a 37-year study period. Results from analysis of these data include ecoregion-based statistical estimates of the amount of LULC change per time period, ranking of the most common types of conversions, rates of change, and percent composition. Overall estimated amount of change per ecoregion from 2001 to 2011 ranged from a low of 370 km 2 in the Northern Basin and Range Ecoregion to a high of 78,782 km 2 in the Southeastern Plains Ecoregion. The Southeastern Plains continues to encompass one of the most intense forest harvesting and regrowth regions in the country, with 16.6 percent of the ecoregion changing between 2001 and 2011. These LULC change statistics provide a new, valuable resource that complements other reference data and field-verified LULC data. Researchers can use this resource to independently validate other land change products or to conduct regional land change assessments.

Photogrammetric Engineering and Remote Sensing↗
USGS2000

Statiscal analysis of an earthquake-induced landslide distribution - The 1989 Loma Prieta, California event

The 1989 Loma Prieta, California earthquake (moment magnitude, M=6.9) generated landslides throughout an area of about 15,000 km2 in central California. Most of these landslides occurred in an area of about 2000 km2 in the mountainous terrain around the epicenter, where they were mapped during field investigations immediately following the earthquake. The distribution of these landslides is investigated statistically, using regression and one-way analysisof variance (ANOVA) techniques to determine how the occurrence of landslides correlates with distance from the earthquake source, slope steepness, and rock type. The landslide concentration (defined as the number of landslide sources per unit area) has a strong inverse correlation with distance from the earthquake source and a strong positive correlation with slope steepness. The landslide concentration differs substantially among the various geologic units in the area. The differences correlate to some degree with differences in lithology and degree of induration, but this correlation is less clear, suggesting a more complex relationship between landslide occurrence and rock properties. ?? 2000 Elsevier Science B.V. All rights reserved.

Engineering Geology↗