Search USGS⌕ Search

SEARCH · Search USGS

Results for “Elements”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources

A blood survey of elements, viral antibodies, and hemoparasites in wintering Harlequin Ducks (Histrionicus histrionicus) and Barrow's Goldeneyes (Bucephala islandica)

Twenty-eight Harlequin Ducks (Histrionicus histrionicus) and 26 Barrow's Goldeneyes (Bucephala islandica) were captured in Prince William Sound, Alaska, between 1 and 15 March 2005. Blood was collected for quantification of element concentrations, prevalence of antibodies to several viruses, and hemoparasite prevalence and identification. Although we found selenium concentrations that have been associated with selenosis in some birds (???.0 ppm ww), our findings contribute to a growing literature describing relatively high selenium in apparently healthy birds in marine environments. Avian influenza virus antibodies were detected in the plasma of 28% of the ducks. No antibodies against adenovirus, reovirus, or paramyxovirus 1 were detected. Several hemoparasite species were identified in 7% of ducks. Our findings are similar to those in other free-living marine waterfowl and do not indicate unusual concerns for the health of these species in this area in late winter. ?? Wildlife Disease Association 2008.

Alaska↗

I. Thermal evolution of Ganymede and implications for surface features. II. Magnetohydrodynamic constraints on deep zonal flow in the giant planets. III. A fast finite-element algorithm for two-dimensional photoclinometry

The work is divided into three independent papers: PAPER I: Thermal evolution models are presented for Ganymede, assuming a mostly differentiated initial state of a water ocean overlying a rock layer. The only heat sources are assumed to be primordial heat (provided by accretion) and the long-lived radiogenic heat sources in the rock component. As Ganymede cools, the ocean thins, and two ice layers develop, one above composed of ice I, and the other below composed of high-pressure polymorphs of ice. Subsolidus convection proceeds separately in each ice layer, its transport of heat calculated using a simple parameterized convection scheme and the most recent data on ice rheology. The model requires that the average entropy of the deep ice layer exceed that of the ice I layer. If the residual ocean separating these layers becomes thin enough, then a Rayleigh-Taylor-like ("diapiric") instability may ensue, driven by the greater entropy of the deeper ice and merging the two ice mantles into a single convective layer. This instability is not predicted by linear analysis but occurs for plausible finite amplitude perturbations associated with large Rayleigh number convection. The resulting warm ice diapirs may lead to a dramatic "heat pulse" at the surface and to fracturing of the lithosphere, and may be directly or indirectly responsible for resurfacing and grooved terrain formation on Ganymede. The timing of this event depends rather sensitively on poorly known rheological parameters but could be consistent with chronologies deduced from estimated cratering rates. Irrespective of the occurrence or importance of the heat pulse, we find that lithospheric fracturing requires rapid stress loading (on a timescale ≾ 10 4 ) years). Such a timescale can be realized by warm ice diapirism, but not directly by gradual global expansion. In the absence of any quantitative and self-consistent model for the resurfacing of Ganymede by liquid water, we favor resurfacing by warm ice flows,which we demonstrate to be physically possible, a plausible consequence of our models, compatible with existing observations, and a hypothesis testable by Galileo. We discuss core formation as an alternative driver for resurfacing, and conclude that it is less attractive. We also consider anew the puzzle of why Callisto differs so greatly from Ganymede, offering several possible explanations. The models presented do not provide a compelling explanation for all aspects of Ganymedean geological evolution, since we have identified several potential problems, most notably the apparently extended period of grooved terrain formation (several hundred million years), which is difficult to reconcile with the heat pulse phenomenon. PAPER II: The observed zonal flows of the giant planets will, if they penetrate below the visible atmosphere, interact significantly with the planetary magnetic field outside the metalized core. The appropriate measure of this interaction is the Chandrasekhar number Q = ( H 2 )/(4πρνα 2 λ) (where H = radial component of the magnetic field, ν = eddy viscosity, λ = magnetic diffusivity, α -1 = lengthscale on which λ varies); at depths where Q ≳ 1 the velocity will be forced to oscillate on a small lengthscale or decay to zero. We estimate the conductivity due to semiconduction in H 2 (Jupiter, Saturn) and ionization in H 2 O (Uranus, Neptune) as a function of depth; the value λ ≃ 10 10 cm 2 s -1 needed for Q = 1 is readily obtained well outside the metallic core (where λ ≃ 10 2 cm 2 s -1 ). These assertions are quantified by a simple model of the equatorial zonal jet in which the flow is assumed uniform on cylinders concentric with the spin axis, and the viscous and magnetic torques on each cylinder are balanced. We solve this "Taylor constraint" simultaneously with the dynamo equation to obtain the velocity and magnetic field in the equatorial plane. With this model we reproduce the widely differing jet widths of Jupiter and Saturn (though not the flow at very high or low latitudes) using ν = 2500 cm 2 s -1 , consistent with the requirement that viscous dissipation not exceed the specific luminosity. A model Uranian jet consistent with the limited Voyager data can also be constructed, with appropriately smaller ν, but only if one assumes a two-layer interior. We tentatively predict a wide Neptunian jet. For Saturn (but not Jupiter or Uranus) the model has a large magnetic Reynolds number where Q = 1 and hence exhibits substantial axisymmetrization of the field in the equatorial plane . This effect may or may not persist at higher latitudes. The one-dimensional model presented is only a first step. Variation of the velocity and magnetic field parallel to the spin axis must be modeled in order to answer several important questions, including: 1) What is the behavior of flows at high latitudes, whose Taylor cylinders are interrupted by the region with Q ≳ 1? 2) To what extent is differential rotation in the envelope responsible for the spin-axisymmetry of Saturn's magnetic field? PAPER III: It is shown that the problem of two-dimensional photoclinometry (PC) -- the reconstruction of a surface z ( x , y ) from a brightness image B( x , y ) -- may be formulated in a natural way in terms of finite elements. The resulting system of equations is underdetermined as a consequence of the lack of boundary conditions for z , but a unique solution may be chosen by minimizing a function S expressing the "roughness" of the surface. An efficient PC algorithm based on this formulation is presented, requiring ~ 10.66 (four-byte) memory locations and ~10 4 floating multiplications/additions per pixel, and incorporating: 1) Minimization of the roughness by the penalty method, which yields the smallest set of equations. 2) Iterative solution of the nonlinear equations by Newton's method. 3) Solution of the linearized equations by an inner iterative cycle of successive over-relaxation, which takes advantage of the extreme sparseness of the system. 4) Multigridding, in which the solutions to the smaller problems obtained by reducing the resolution are used recursively to greatly speed convergence at the higher resolutions, and 5) A rapid noniterative initial estimate of z obtained by exploiting the special symmetry of the equations obtained in the first linearization. The algorithm is extensively demonstrated on 200 by 200 pixel synthetic "images" generated from digital topographic data for northern Utah over a range of phase angles. Rms error in the solution is ~ 22 m, out of ~ 660 m total relief. The error is dominated by "stripes" with the same azimuth as the light source, resulting from use of the roughness criterion in lieu of boundary conditions; the rms error along profiles parallel to the stripes is only ~ 2-8 m, depending on the phase angle. Satisfactory solutions are obtained even in the presence of quantization error, noise, and moderate blur in the image. Applications of the PC algorithm to both remote sensing and photomicrography are sketched; a photoclinometric map of a low-relief Precambrian era fossil is presented as an example of the latter. Prospects for dealing with photometrically inhomogeneous surfaces, and an extension of the method to the analysis of side-looking radar data ("radarclinometry") are also discussed.

Thesis↗

Metals and trace elements in tissues of common eiders (Somateria mollissima) from the Finnish archipelago

We sampled Common Eiders ( Somateria mollissima ) at five locations near coastal Finland in 1997 and 1998 for evidence of exposure to arsenic, cadmium, chromium, copper, iron, mercury, magnesium, molybdenum, lead, selenium, and zinc. Livers and kidneys were collected from adult males and females found dead and hunter-killed males, and livers were collected from ducklings. Two adult females, one of which had an ingested lead shot in its gizzard, were poisoned by lead. The concentration of metals and trace elements that we found in tissues of eiders, other than the two lead poisoned birds, were not high enough to have independently caused mortality.

Ornis Fennica↗

Organochlorine pesticides, PCBs, trace elements and metals in western pond turtle eggs from Oregon

With increased concern over the status of reptile populations globally, contaminant studies should be part of species evaluations. We analyzed eggs of western pond turtles from Fern Ridge Reservoir in western Oregon for 20 organochlorine (OC) pesticides or metabolites, 42 congener-specific polychlorinated biphenyls (PCBs), and 16 trace elements or metals. These eggs represent the first of this species analyzed. The OC pesticides and PCB residue concentrations in the western pond turtle eggs were generally low and similar to those found in eggs of snapping turtles from a remote site in Ontario, Canada. Western pond turtle eggs also contained mercury and chromium, which are metals of special concern. Although few reptilian eggs have been analyzed for metals, the 44.9 mug/g dry weight chromium in a western pond turtle egg in this study may be the highest reported in a reptilian egg. We found no significant difference in contaminant concentrations in eggs from nests in Oregon, where all turtle eggs failed to hatch compared to those where some eggs hatched. During this initial project, however, we were unable to assess fully the role of OCs, PCBs and other contaminants in the western pond turtle decline. Factors other than contaminants may be involved. In another study, snapping turtle eggs near the Great Lakes-St. Lawrence River basin were much more contaminated with evidence reported of effects on sex differentiation and reproductive endocrine function. Egg hatchability, the only reproductive parameter monitored, may not be the most sensitive endpoint. Other endpoints, including endocrine function, deformity rates, growth rates, and sex determination need study.

Northwest Science↗

Organochlorine pesticide, polychlorinated biphenyl, trace element and metal residues in bird eggs from Salton Sea, California, 2004

The Salton Sea is a highly eutrophic, hypersaline terminal lake that receives inflows primarily from agricultural drainages in the Imperial and Coachella valleys. Impending reductions in water inflow at Salton Sea may concentrate existing contaminants which have been a concern for many years, and result in higher exposure to birds. Thus, waterbird eggs were collected and analyzed in 2004 and compared with residue concentrations from earlier years; these data provide a base for future comparisons. Eggs from four waterbird species (black-crowned night-heron [Nycticorax nycticorax], great egret [Ardea alba], black-necked stilt [Himantopus mexicanus], and American avocet [Recurvirostra Americana]) were collected. Eggs were analyzed for organochlorine pesticides, polychlorinated biphenyls (PCBs), metals, and trace elements, with current results compared to those reported for eggs collected from the same species and others during 1985a??1993. The two contaminants of primary concern were p,pa??-DDE (DDE) and selenium. DDE concentrations in night-heron and great egret eggs collected from the northwest corner of Salton Sea (Whitewater River delta) decreased 91 and 95%, respectively, by 2004, with a concomitant increase in eggshell thickness for both species. Decreases in bird egg DDE levels paralleled those in tissues of tilapia (Oreochromis mossambicus ?? O. urolepis), an important prey species for herons and egrets. Despite most nests of night-herons and great egrets failing in 2004 due to predation, predicted reproductive effects based on DDE concentrations in eggs were low or negligible for these species. The 2004 DDE findings were in dramatic contrast to those in the past decade, and included an 81% decrease in black-necked stilt eggs, although concentrations were lower historically than those reported in night-herons and egrets. Selenium concentrations in black-necked stilt eggs from the southeast corner of Salton Sea (Davis Road) were similar in 1993 and 2004, with 4.5a??7.6% of the clutches estimated to be selenium impaired during both time periods. Because of present selenium concentrations and future reduced water inflow, the stilt population is of special concern. Between 1992 and 1993 and 2004 selenium in night-heron and great egret eggs from the Whitewater River delta at the north end of the Sea decreased by 81 and 55%, respectively. None of the night-heron or egret eggs collected in 2004 contained selenium concentrations above the lowest reported effect concentration (6.0 I?g/g dw). Reasons for selenium decreases in night-heron and egret eggs are unknown. Other contaminants evaluated in 2004 were all below known effect concentrations. However, in spite of generally low contaminant levels in 2004, the nesting populations of night-herons and great egrets at Salton Sea were greatly reduced from earlier years and snowy egrets (Egretta thula) were not found nesting. Other factors that include predation, reduced water level, diminished roost and nest sites, increased salinity, eutrophication, and reduced fish populations can certainly influence avian populations. Future monitoring, to validate predicted responses by birds, other organisms, and contaminant loadings associated with reduced water inflows, together with adaptive management should be the operational framework at the Salton Sea.

Hydrobiologia↗

The five elements process: Designing optimal landscapes to meet bird conservation objectives

In February 2004 at Port Aransas, Texas, Partners in Flight (PIF) and representatives from the other NABCI bird initiative met to discuss the process of stepping down PIF continental population objectives (Rich et al. 2004) to regional and local scales. Participants also discussed rolling up local population estimates and targets to assess the feasibility of the landscape changes necessary to meet continental objectives. Since the process of stepping-down/rolling-up population objectives shifts focus from identifying priority species to formulating quantitative estimates of how much habitat was needed, where, and by when the Port Aransas group called the stepping-down/rolling-up process a??stepping forward.a?? Participants agreed that stepping forward objectives was the beginning of an inevitably iterative dialog necessary to evaluate the assumptions of PIF population estimates and objectives as well as the methods used to monitor local implementation. To facilitate the translation of continental population objectives into biologically sound, measurable regional and local population-based habitat targets the Port Aransas group recommended a process no commonly referred to as the Five Elements Processa?|

Partners in Flight Technical Series↗

Mercury and other element exposure to tree swallows (Tachycineta bicolor) nesting on Lostwood National Wildlife Refuge, North Dakota

Elevated mercury concentrations in water were reported in the prairie wetlands at Lostwood National Wildlife Refuge, ND. In order to determine whether wildlife associated with these wetlands was exposed to and then accumulated higher mercury concentrations than wildlife living near more permanent wetlands (e.g. lakes), tree swallow (Tachycineta bicolor) eggs and nestlings were collected from nests near seasonal wetlands, semi-permanent wetlands, and lakes. Mercury concentrations in eggs collected near seasonal wetlands were higher than those collected near semi-permanent wetlands or lakes. In contrast, mercury concentrations in nestling livers did not differ among wetland types. Mercury and other element concentrations in tree swallow eggs and nestlings collected from all wetlands were low. As suspected from these low concentrations, mercury concentrations in sample eggs were not a significant factor explaining the hatching success of the remaining eggs in each clutch.

Environmental Pollution↗

Point- and nonpoint-source trace elements in a wild and scenic river of northern New Mexico.

Variations in water quality of the upper Rio Grande and Red River are presented. A downstream increase in concentrations of various constituents, at times approaching or exceeding water quality standards, occurred due to leaching of natural ore bodies and permitted discharges from molybdenum mill tailings ponds. Nonpoint sources are a major cause of elevated trace element concentrations.-from Author

Journal of Soil and Water Conservation↗

Algorithm to reduce approximation error from the complex-variable boundary-element method applied to soil freezing.

An algorithm is presented for the numerical solution of the Laplace equation boundary-value problem, which is assumed to apply to soil freezing or thawing. The Laplace equation is numerically approximated by the complex-variable boundary-element method. The algorithm aids in reducing integrated relative error by providing a true measure of modeling error along the solution domain boundary. This measure of error can be used to select locations for adding, removing, or relocating nodal points on the boundary or to provide bounds for the integrated relative error of unknown nodal variable values along the boundary.

Numerical heat transfer↗

Trace elements and pesticides in Salton Sea area, California

Concentrations of numerous potentially toxic trace elements and pesticides were determined in water, sediment, and biota from the Salton Sea area in southestern California. Comparison of results with data from other studies in this area and from other areas, and with various water-quality standards or criteria, indicate that selenium probably is the principal contaminant of concern in the Salton Sea basin and that it probably is related to agricultural practices. Selenium is mobilized in the subsurface drainwater produced by agricultural irrigation and transported in ditches and rivers, some of which pass through or near the Salton Sea National Wildlife Refuge before entering the Salton Sea. Some selenium apparently is incorporated into the food chain. In response to the finding of elevated selenium residues in fish from the area by State agencies, the Imperial County Health Department has issued a health advisory restricting or prohibiting human consumption of fish from the Salton Sea and drains.

Conference Paper↗

Role of sediment-trace element chemistry in water-quality monitoring and the need for standard analytical methods

Multiple linear regression models calculated from readily obtainable chemical and physical parameters can explain a high percentage (70% or greater) of observed sediment trace-element variance for Cu, Zn, Pb, Cr, Ni, Co, As, Sb, Se, and Hg. Almost all the factors used in the various models fall into the category of operational definitions (e.g., grain size, surface area, and geochemical substrates such as amorphous iron and manganese oxides). Thus, the concentrations and distributions used in the various models are operationally defined, and are subject to substantial change depending on the method used to determine them. Without standardized procedures, data from different sources are not comparable, and the utility and applicability of the various models would be questionable.

Conference Paper↗

Magmatic (silicates/saline/sulfur-rich/CO2) immiscibility and zirconium and rare-earth element enrichment from alkaline magma chamber margins : Evidence from Ponza Island, Pontine Archipelago, Italy

Fluid inclusions were measured from a feldspathoid-bearing syenite xenolith entrained in trachyte from Ponza, one of the islands of the Pontine Archipelago, located in the Gulf of Gaeta, Italy. The feldspathoid-bearing syenite consists mainly of potassium feldspar, clinopyroxene, amphibole, biotite, titanite, manganoan magnetite, apatite with minor nosean, Na-rich feldspar, pyrrhotite, and rare cheralite. Baddeleyite and zirkelite occur associated with manganoan magnetite. Detailed electron-microprobe analysis reveals enrichments in REE, Y, Nb, U, Th as well as Cl and F in appropriate phases. Fluid inclusions observed in potassium feldspar are either silicate-melt or aqueous inclusions. The aqueous inclusions can be further classified as. (1) one-phase vapor, (2) two-phase (V + L) inclusions, vapor-rich inclusions with a small amount of CO2 in most cases; homogenization of the inclusions always occurred in the vapor phase between 359 and 424??C, salinities vary from 2.9 to 8.5 wt. % NaCl equivalent; and. (3) three-phase and multiphase inclusions (hypersaline/sulfur-rich aqueous inclusions sometimes with up to 8 or more solid phases). Daughter minerals dissolve on heating before vapor/liquid homogenization. Standardless quantitative scanning electron microscope X-ray fluorescence analysis has tentatively identified the following chloride and sulfate daughter crystals; halite, sylvite, glauberite. arcanite, anhydrite, and thenardite. Melting of the daughter crystals occurs between 459 and 536??C (54 to 65 wt. % NaCI equivalent) whereas total homogenization is between 640 and 755??C. The occurrence of silicate-melt inclusions and high-temperature, solute-rich aqueous inclusions suggests that the druse or miarolitic texture of the xenolith is late-stage magmatic. The xenolith from Ponza represents a portion of the peripheral magma chamber wall that has recorded the magmatic/hydrothermal transition and the passage of high solute fluids enriched in chlorides, sulfur, and incompatible elements.

European Journal of Mineralogy↗

Lead-isotopic, sulphur-isotopic, and trace-element studies of galena from the Silesian-Cracow Zn-Pb ores, polymetallic veins from the Gory Swietokrzyskie MTS, and the Myszkow porphyry copper deposit, Poland

Lead-isotopic data on galena samples collected from a paragenetically constrained suite of samples from the Silesian-Cracow ore district show no regional or paragenetically controlled lead-isotopic trends within the analytical reproducibility of the measurements. Furthermore, the new lead-isotopic data agree with previously reported lead-isotopic results (R. E. Zartman et al., 1979). Sulfur-isotopic analyses of ores from the Silesian-Cracow district as well as from vein ore from the Gory Swietokrzyskie Mts. and the Myszkow porphyry copper deposit, when coupled with trace-element data from the galena samples, clearly discriminate different hydrothermal ore-forming events. Lead-isotopic data from the Permian and Miocene evaporite deposits in Poland indicate that neither of these evaporite deposits were a source of metals for the Silesian-Cracow district ores. Furthermore, lead-isotopic data from these evaporite deposits and the shale residues from the Miocene halite samples indicate that the crustal evolution of lead in the central and western European platform in southern Poland followed normal crustal lead-isotopic growth, and that the isotopic composition of crustal lead had progressed beyond the lead-isotopic composition of lead in the Silesian-Cracow ores by Permian time. Thus, Mesozoic and Tertiary sedimentary flysch rocks can be eliminated as viable source rocks for the metals in the Silesian-Cracow Mississippi Valley-type (MVT) deposits. The uniformity of the isotopic composition of lead in the Silesian-Cracow ores, when coupled with the geologic evidence that mineralization must post-date Late Jurassic faulting (E. Gorecka, 1991), constrains the geochemical nature of the source region. The source of the metals is probably a well-mixed, multi-cycle molasse sequence of sedimentary rocks that contains little if any Precambrian metamorphic or granitic clasts (S. E. Church, R. B. Vaughn, 1992). If ore deposition was post Late Jurassic (about 150 m. y.) or later as indicated by the geologic evidence, the source rocks probably contained elevated concentrations of Zn and Pb (75-100 ppm), and relatively low concentrations of U and Th (2 and 8 ppm or less, respectively). The Carboniferous coal-bearing molasse rocks of the Upper Silesian Coal Basin are a prime candidate for such a source region. The presence of ammonia and acetate in the fluid inclusions (Viets et al., 1996a) also indicate that the Carboniferous coal-bearing molasse sequence in the Upper Silesian Coal Basin may have been a suitable pathway for the MVT ore fluids. The lead-isotopic homogeneity, when coupled with the sulfur-isotopic heterogeneity of the ores suggests that mixing of a single metal-bearing fluid with waters from separate aquifers containing variable sulfur-isotopic compositions in karsts in the Muschelkalk Formation of Middle Triassic age may have been responsible for the precipitation of the ores of the Silesian-Cracow district.

Prace - Panstwowego Instytutu Geologicznego↗

Isotopic and trace element compositions of upper mantle and lower crustal xenoliths, Cima volcanic field, California: Implications for evolution of the subcontinental lithospheric mantle

Ultramafic and mafic xenoliths from the Cima volcanic field, southern California, provide evidence of episodic modification of the upper mantle and underplating of the crust beneath a portion of the southern Basin and Range province. The upper mantle xenoliths include spinel peridotite and anhydrous and hydrous pyroxenite, some cut by igneous-textured pyroxenite-gabbro veins and dikes and some by veins of amphibole ?? plagioclase. Igneous-textured pyroxenites and gabbros like the dike rocks also occur abundantly as isolated xenoliths inferred to represent underplated crust. Mineral and whole rock trace element compositions among and within the different groups of xenoliths are highly variable, reflecting multiple processes that include magma-mantle wall rock reactions, episodic intrusion and it filtration of basaltic melts of varied sources into the mantle wall rock, and fractionation. Nd, Sr, and Pb isotopic compositions mostly of clinopyroxene and plagioclase mineral separates show distinct differences between mantle xenoliths (??Nd = -5.7 to +3.4; 87Sr/86Sr = 0.7051 - 0.7073; 206Pb/204Pb = 19.045 - 19.195) and the igneous-textured xenoliths (??Nd = +7.7 to +11.7; 87Sr/86Sr = 0.7027 - 0.7036 with one carbonate-affected outlier at 0.7054; and 206Pb/204Pb = 18.751 - 19.068), so that they cannot be related. The igneous-textured pyroxenites and gabbros are similar in their isotopic compositions to the host basaltic rocks, which have ??Nd of+5.1 to +9.3; 87Sr/86Sr of 0.7028 - 0.7050, and 206Pb/204Pb of 18.685 - 21.050. The igneous-textured pyroxenites and gabbros are therefore inferred to be related to the host rocks as earlier cogenetic intrusions in the mantle and in the lower crust. Two samples of peridotite, one modally metasomatized by amphibole and the other by plagioclase, have isotopic compositions intermediate between the igneous-textured xenoliths and the mantle rock, suggesting mixing, but also derivation of the metasomatizing magmas from two separate and distinct sources. Sm-Nd two-mineral "isochrons" yield apparent ages for petrographically identical rocks believed to be coeval ranging from -0 to 113 ?? 26 Ma, indicating the unreliability of dating these rocks with this method. Amphibole and plagioclase megacrysts are isotopically like the host basalts and probably originate by mechanical breakup of veins comagmatic with the host basaltic rocks. Unlike other Basin and Range localities, Cima Cr-diopside group isotopic compositions do not overlap with those of the host basalts. Copyright 1997 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

Incorporation of rare earth elements in titanite: Stabilization of the A2/a dimorph by creation of antiphase boundaries

The atomic arrangement of a natural rare-earth-rich titanite and two synthetic rare-earth-doped titanites have been refined in space group A2/a, and the atomic arrangement of an undoped P21/a synthetic titanite was also refined for comparison. Previous work has shown that titanite possesses a domain structure, with domains formed of like-displaced Ti atoms in the [100] octahedral chains. P21/a titanite results when the crystal is formed of a single domain, but as Ti-reversal sites occur in the octahedral chain the apparent A2/a structure results from the average of antiphase domains. Antiphase boundaries occur at O1, which is alternately overbonded or underbonded at the boundaries, depending on the displacement of the neighboring Ti atoms. Type 2 antiphase boundaries exist where two Ti atoms are displaced away from the intervening O1 atom and are energetically unfavorable because of underbonding of that O1 atom. However, substitution of a trivalent rare earth element in the adjacent Ca2+ site relieves that underbonding, favoring the creation of type 2 antiphase boundaries and stabilization of the A2/a dimorph. The results of high-precision crystal structure analyses demonstrate that rare earth substituents for Ca stabilize the A2/a dimorph at lower substitution levels than required for octahedral substitutions.

American Mineralogist↗

Test functions for three-dimensional control-volume mixed finite-element methods on irregular grids

Numerical methods based on unstructured grids, with irregular cells, usually require discrete shape functions to approximate the distribution of quantities across cells. For control-volume mixed finite-element methods, vector shape functions are used to approximate the distribution of velocities across cells and vector test functions are used to minimize the error associated with the numerical approximation scheme. For a logically cubic mesh, the lowest-order shape functions are chosen in a natural way to conserve intercell fluxes that vary linearly in logical space. Vector test functions, while somewhat restricted by the mapping into the logical reference cube, admit a wider class of possibilities. Ideally, an error minimization procedure to select the test function from an acceptable class of candidates would be the best procedure. Lacking such a procedure, we first investigate the effect of possible test functions on the pressure distribution over the control volume; specifically, we look for test functions that allow for the elimination of intermediate pressures on cell faces. From these results, we select three forms for the test function for use in a control-volume mixed method code and subject them to an error analysis for different forms of grid irregularity; errors are reported in terms of the discrete L2 norm of the velocity error. Of these three forms, one appears to produce optimal results for most forms of grid irregularity.

Conference Paper↗

Measuring mercury and other elemental components in tree rings

There has been considerable interest in measuring heavy metal pollution, such as mercury, using tree ring analysis. Since 1970, this method has provided a historical snapshot of pollutant concentrations near hazardous waste sites. Traditional methods of analysis have long been used with heavy metal pollutants such as mercury. These methods, such as atomic fluorescence and laser ablation, are sometimes time consuming and expensive to implement. In recent years, ion beam techniques, such as Particle Induced X-Ray Emission (PIXE), have been used to measure large numbers of elements. Most of the existing research in this area has been completed for low to medium atomic number pollutants, such as titanium, cobalt, nickel, and copper. Due to the reduction of sensitivity, it is often difficult or impossible to use traditional low energy (few MeV) PIXE analysis for pollutants with large atomic numbers. For example, the PIXE detection limit for mercury was recently measured to be about 1 ppm for a spiked Southern Magnolia wood sample [ref. 1]. This presentation will compare PIXE and standard chemical concentration results for a variety of wood samples.

Conference Paper↗