Search USGS⌕ Search

SEARCH · Search USGS

Results for “earthquake hazards”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2026

The Cascadia Region Earthquake Science Center (CRESCENT): Advancing understanding of Cascadia's earthquake hazards

The Cascadia Subduction Zone (CSZ) is capable of producing large megathrust earthquakes and tsunamis, posing significant risks to the Pacific Northwest. This paper examines the seismic characteristics of the CSZ, including its offshore coupling, sparse seismicity, and a complex paleoseismic record. While recent advances in geophysical methods and data collection have improved our understanding of subduction zone processes, important uncertainties remain regarding rupture dynamics, ground shaking, and tsunami impacts. The Cascadia Region Earthquake Science Center (CRESCENT) has been established to address these challenges through coordinated research, education, and community engagement. By integrating scientific studies, fostering collaboration, and leveraging new technologies, CRESCENT seeks to improve hazard assessment and resilience in the region. This paper outlines the primary challenges and opportunities in advancing subduction zone science and enhancing societal preparedness for future CSZ events.

California, Oregon, Washington↗
USGS2011

Geophysical setting of the February 21, 2008 Mw 6 Wells earthquake, Nevada, and implications for earthquake hazards

We utilize gravity and magnetic methods to investigate the regional geophysical setting of the Wells earthquake. In particular, we delineate major crustal structures that may have played a role in the location of the earthquake and discuss the geometry of a nearby sedimentary basin that may have contributed to observed ground shaking. The February 21, 2008 M w 6.0 Wells earthquake, centered about 10 km northeast of Wells, Nevada, caused considerable damage to local buildings, especially in the historic old town area. The earthquake occurred on a previously unmapped normal fault and preliminary relocated events indicate a fault plane dipping about 55 degrees to the southeast. The epicenter lies near the intersection of major Basin and Range normal faults along the Ruby Mountains and Snake Mountains, and strike-slip faults in the southern Snake Mountains. Regionally, the Wells earthquake epicenter is aligned with a crustal-scale boundary along the edge of a basement gravity high that correlates to the Ruby Mountains fault zone. The Wells earthquake also occurred near a geophysically defined strike-slip fault that offsets buried plutonic rocks by about 30 km. In addition, a new depth-to-basement map, derived from the inversion of gravity data, indicates that the Wells earthquake and most of its associated aftershock sequence lie below a small oval- to rhomboid-shaped basin, that reaches a depth of about 2 km. Although the basin is of limited areal extent, it could have contributed to increased ground shaking in the vicinity of the city of Wells, Nevada, due to basin amplification of seismic waves.

Nevada↗
USGS2011

Seismic survey probes urban earthquake hazards in Pacific Northwest

A multidisciplinary seismic survey earlier this year in the Pacific Northwest is expected to reveal much new information about the earthquake threat to U.S. and Canadian urban areas there. A disastrous earthquake is a very real possibility in the region. The survey, known as the Seismic Hazards Investigation in Puget Sound (SHIPS), engendered close cooperation among geologists, biologists, environmental groups, and government agencies. It also succeeded in striking a fine balance between the need to prepare for a great earthquake and the requirement to protect a coveted marine environment while operating a large airgun array.

Washington↗
USGS1984

The use of geologic and seismologic information to reduce earthquake Hazards in California

Five examples illustrate how geologic and seismologic information can be used to reduce the effects of earthquakes Included are procedures for anticipating damage to critical facilities, preparing, adopting, or implementing seismic safety studies, plans, and programs, retrofitting highway bridges, regulating development in areas subject to fault-rupture, and strengthening or removing unreinforced masonry buildings. The collective effect of these procedures is to improve the public safety, health, and welfare of individuals and their communities. ?? 1984 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1988

Assessing the earthquake hazards in urban areas

Major urban areas in widely scattered geographic locations across the United States are a t varying degrees of risk from earthquakes. the locations of these urban areas include Charleston, South Carolina; Memphis Tennessee; St.Louis, Missouri; Salt Lake City, Utah; Seattle-Tacoma, Washington; Portland, Oregon; and Anchorage, Alaska; even Boston, Massachusetts, and Buffalo New York, have a history of large earthquakes. Cooperative research during the past decade has focused on assessing the nature and degree of the risk or seismic hazard i nthe broad geographic regions around each urban area. The strategy since the 1970's has been to bring together local, State, and Federal resources to solve the problem of assessing seismic risk. Successfl sooperative programs have been launched in the San Francisco Bay and Los Angeles regions in California and the Wasatch Front region in Utah.

Earthquakes & Volcanoes (USGS)↗
USGS1999

Subduction zone and crustal dynamics of western Washington; a tectonic model for earthquake hazards evaluation

The Cascadia subduction zone is extremely complex in the western Washington region, involving local deformation of the subducting Juan de Fuca plate and complicated block structures in the crust. It has been postulated that the Cascadia subduction zone could be the source for a large thrust earthquake, possibly as large as M9.0. Large intraplate earthquakes from within the subducting Juan de Fuca plate beneath the Puget Sound region have accounted for most of the energy release in this century and future such large earthquakes are expected. Added to these possible hazards is clear evidence for strong crustal deformation events in the Puget Sound region near faults such as the Seattle fault, which passes through the southern Seattle metropolitan area. In order to understand the nature of these individual earthquake sources and their possible interrelationship, we have conducted an extensive seismotectonic study of the region. We have employed P-wave velocity models developed using local earthquake tomography as a key tool in this research. Other information utilized includes geological, paleoseismic, gravity, magnetic, magnetotelluric, deformation, seismicity, focal mechanism and geodetic data. Neotectonic concepts were tested and augmented through use of anelastic (creep) deformation models based on thin-plate, finite-element techniques developed by Peter Bird, UCLA. These programs model anelastic strain rate, stress, and velocity fields for given rheological parameters, variable crust and lithosphere thicknesses, heat flow, and elevation. Known faults in western Washington and the main Cascadia subduction thrust were incorporated in the modeling process. Significant results from the velocity models include delineation of a previously studied arch in the subducting Juan de Fuca plate. The axis of the arch is oriented in the direction of current subduction and asymmetrically deformed due to the effects of a northern buttress mapped in the velocity models. This buttress occurs under the North Cascades region of Washington and under southern Vancouver Island. We find that regional faults zones such as the Devils Mt. and Darrington zones follow the margin of this buttress and the Olympic-Wallowa lineament forms its southern boundary east of the Puget Lowland. Thick, high-velocity, lower-crustal rocks are interpreted to be a mafic/ultramafic wedge occuring just above the subduction thrust. This mafic wedge appears to be jointly deformed with the arch, suggesting strong coupling between the subducting plate and upper plate crust in the Puget Sound region at depths >30 km. Such tectonic coupling is possible if brittle-ductile transition temperatures for mafic/ultramafic rocks on both sides of the thrust are assumed. The deformation models show that dominant north-south compression in the coast ranges of Washington and Oregon is controlled by a highly mafic crust and low heat flow, allowing efficient transmission of margin-parallel shear from Pacific plate interaction with North America. Complex stress patterns which curve around the Puget Sound region require a concentration of northwest-directed shear in the North Cascades of Washington. The preferred model shows that greatest horizontal shortening occurs across the Devils Mt. fault zone and the east end of the Seattle fault.

Open-File Report↗
USGS2019

Late Quaternary slip rate of the Central Sierra Madre fault, southern California: Implications for slip partitioning and earthquake hazard

The Sierra Madre fault system accommodates contraction within a large restraining bend area of the San Andreas fault along the northern margin of the Los Angeles metropolitan area in Southern California. Reverse slip along this fault system during earthquakes controls growth of the San Gabriel Mountains and poses a significant seismic hazard to the region. Here, we measure the late Quaternary slip rate of the Central Sierra Madre fault (CSMF) using analysis of high-resolution topography combined with cosmogenic 10Be surface exposure dating and post-IR IRSL geochronology. We mapped terrace and fan surfaces from three drainages that cross the CSMF and correlate them based on soil development and geomorphic position. Cosmogenic nuclide and luminescence ages are consistent amongst the three prominent surfaces offset ~5 to 28 m across the fault zone. We devised a new strategy to estimate surface ages, incorporating data from two dating methods at three locations, refined by inset age relationships, that yields surface age estimates of 54 +21/-13 ka, 36 ± 8 ka, and 12 ± 4 ka. Estimated slip for these geomorphic markers is more uncertain than the measured vertical separation due to uncertainties in fault dip and ranges from 7.5 +5.4/-3.1 m to 58.5 +46.3/-14.4 m. Incremental dip-slip rate estimates from different age surfaces and locations overlap within uncertainty, with median values ranging from 0.7 to 1.1 mm/yr. The average slip rate for all three generations of markers is 1.1 +1.2/-0.4 mm/yr. This late Quaternary slip rate for the CSMF is slower than estimates based on interseismic geodetic data, and emphasizes the importance of contraction distributed across multiple structures south of the Sierra Madre fault when assessed against the geodetic shortening budget. Despite being the central portion of the broader Sierra Madre fault system, the CSMF has a slip rate similar to or lower than neighboring sections, suggesting that slip transfer onto other nearby faults control the along-strike pattern of deformation rate. Paleoseismic evidence indicates that the last earthquake on the CSMF was in the early Holocene, and the slip rate we estimate suggests that the accumulated elastic strain could produce many meters of slip in future earthquakes.

California↗
USGS2004

Tectonic framework and Late Cenozoic tectonic history of the northern part of Cyprus: Implications for earthquake hazards and regional tectonics

Located near the triple junction of the African, Arabia, and Eurasian Plate, Cyprus has had an active and complex neotectonic history, which includes devastating historical earthquakes. Investigations into the tectonic framework of the northern part of Cyprus provide important insights into regional tectonism of the Eastern Mediterranean and Middle East. The northern part of Cyprus is divided into two tectono-stratigraphic terranes, the boundary of which is the Ovgos fault zone. In the Middle Miocene, the Ovgos fault zone was a marine platform margin, which separated open-marine platform carbonates from deep-marine turbidites. Transpressive movement along easterly and northeasterly trending structures dominated the Late Miocene; deposition and preservation of Messinian evaporites occurred in grabens at intersections of these trends. N–S compression began in the Early Pliocene and produced contractional tectonism along east–west trends, including major thrusting of allochthonous rocks in the Kyrenia Range. Quaternary deformation has been dominated by strike-slip faults along northeast and northwest trends; movement during the Pleistocene occurred on several of these faults; Holocene movement is documented on one of these faults. A seismic hazard is implied for the Nicosia area because its proximity to the Quaternary faults. Since the Miocene, Cyprus has been continuously uplifted, but the tectonic setting is controversial, as some researchers invoke a subduction zone setting and others ascribe to a regime of strike-slip tectonics. Our neotectonic framework is consistent with a restraining bend model for Cyprus in a regional strike-slip regime.

Journal of Asian Earth Sciences↗
USGS1998

Surface-seismic imaging for nehrp soil profile classifications and earthquake hazards in urban areas

We acquired high-resolution seismic-refraction data on the ground surface in selected areas of the San Fernando Valley (SFV) to help explain the earthquake damage patterns and the variation in ground motion caused by the 17 January 1994 magnitude 6.7 Northridge earthquake. We used these data to determine the compressional- and shear-wave velocities (Vp and Vs) at 20 aftershock recording sites to 30-m depth ( V??s30, and V??p30). Two other sites, located next to boreholes with downhole Vp and Vs data, show that we imaged very similar seismic-vefocity structures in the upper 40 m. Overall, high site response appears to be associated with tow Vs in the near surface, but there can be a wide rangepf site amplifications for a given NEHRP soil type. The data suggest that for the SFV, if the V??s30 is known, we can determine whether the earthquake ground motion will be amplified above a factor of 2 relative to a local rock site.

Geotechnical Special Publication↗
USGS1981

Locations of geophysical instruments and survey points operated under the earthquake prediction element of the Earthquake Hazards Reduction Program 1981

This open-file report contains a series of maps and a list of the various geophysical monitoring sites (stations) operated by the U. S. Geological Survey and its contractors under the Earthquake Prediction Research Program. The purpose of this open file report is to provide information on type, location, frequency of measurement, and principal investigator for observations being made in California.

California↗
USGS2018

The San Andreas Fault System--Complexities along a major transform fault system and relation to earthquake hazards

The San Andreas Fault System is a 1300-km-long transform boundary that accommodates motion between the North American and Pacific Plates. New technologies and data reveal rich details about the present configuration of faults, distribution of strain and associated seismic hazard on this complex network of faults. This contribution provides a brief summary of the geologic history of the San Andreas Fault System, followed by an introduction to recent research that has changed understanding of the hazards along the main faults. Organized by region, we highlight a selection of recent research using new geodetic techniques, improved topographic data, advanced geochronologic methods, and high-resolution geophysics. The contribution ends with a review of the historic earthquakes on the San Andreas and San Jacinto Faults, comparing these to past ruptures interpreted from paleoseismic studies.

California↗
USGS1999

Integration of high-resolution seismic and aeromagnetic data for earthquake hazards evaluations: An example from the Willamette Valley, Oregon

Aeromagnetic and high-resolution seismic reflection data were integrated to place constraints on the history of seismic activity and to determine the continuity of the possibly active, yet largely concealed Mount Angel fault in the Willamette Valley, Oregon. Recent seismic activity possibly related to the 20-km-long fault includes a swarm of small earthquakes near Woodburn in 1990 and the magnitude 5.6 Scotts Mills earthquake in 1993. Newly acquired aeromagnetic data show several large northwest-trending anomalies, including one associated with the Mount Angel fault. The magnetic signature indicates that the fault may actually extend 70 km across the Willamette Valley to join the Newberg and Gales Creek faults in the Oregon Coast Range. We collected 24-fold high-resolution seismic reflection data along two transects near Woodburn, Oregon, to image the offset of the Miocene-age Columbia River Basalts ( CRB ) and overlying sediments at and northwest of the known mapped extent of the Mount Angel fault. The seismic data show a 100-200-m offset in the CRB reflector at depths from 300 to 700 m. Folded or offset sediments appear above the CRB with decreasing amplitude to depths as shallow as were imaged (approximately 40 m). Modeling experiments based on the magnetic data indicate, however, that the anomaly associated with the Mount Angel fault is not caused solely by an offset of the CRB and overlying sediments. Underlying magnetic sources, which we presume to be volcanic rocks of the Siletz terrane, must have vertical offsets of at least 500 m to fit the observed data. We conclude that the Mount Angel fault appears to have been active since Eocene age and that the Gales Creek, Newberg, and Mount Angel faults should be considered a single potentially active fault system. This fault, as well as other parallel northwest-trending faults in the Willamette Valley, should be considered as risks for future potentially damaging earthquakes.

Oregon↗