Search USGS⌕ Search

SEARCH · Search USGS

Results for “Special Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2004

Debris-flow hazards at San Salvador, San Vicente, and San Miguel volcanoes, El Salvador

Volcanic debris flows (lahars) in El Salvador pose a significant risk to tens of thousands of people as well as to property and important infrastructure. Major cities and nearly a third of the country's population are located near San Salvador, San Vicente, and San Miguel volcanoes. Debris flows traveling as little as 4 km from source at these volcanoes put hundreds to thousands of lives, property, and infrastructure at risk. We used a statistically based model that relates debris-flow volume to cross-sectional and planimetric inundation areas to evaluate spatial patterns of inundation from a suite of debris flows ranging in volume from 100,000 m 3 to as large as 100 million m 3 and examined prehistoric deposits and a limited number of historical events at these volcanoes to estimate probable frequencies of recurrence. Our analyses show that zones of greatest debris-flow hazard generally are focused within 10 km of the summits of the volcanoes. For typical debris-flow velocities (3–10 m/s), these hazard areas can be inundated within a few minutes to a few tens of minutes after the onset of a debris flow. Our analyses of debris-flow recurrence at these volcanoes suggest that debris flows with volumes of 100,000 m 3 to as large as 500,000 m 3 have probable return periods broadly in the range of ∼10 to 100 yr. Debris flows having volumes less than 100,000 m 3 probably recur more frequently, especially at San Miguel volcano. Despite the limited extents of the hazard zones portrayed in our analyses, even the smallest debris flows could be devastating. Urban and agricultural expansions have encroached onto the flanks of the volcanoes, and debris-flow–hazard zones extend well into areas that are settled densely or used for agriculture. Therefore, people living, working, or recreating along channels that drain the volcanoes must learn to recognize potentially hazardous conditions, be aware of the extents of debris-flow–hazard zones, and be prepared to evacuate to safer ground when hazardous conditions develop.

Special Paper of the Geological Society of America↗
USGS2004

Geochemistry of quartzofeldspathic gneisses and metamorphic mafic rocks of the Indian Creek and Pony–Middle Mountain Metamorphic Suites, Tobacco Root Mountains, Montana

Quartzofeldspathic gneisses and metamorphic mafic rocks are the dominant lithologies in the Indian Creek and Pony–Middle Mountain Metamorphic Suites of the Tobacco Root Mountains. Field relations, geochemical discriminant analysis, and isotopic systematics indicate that these rocks derive from a bimodal volcanic suite ca. 3.3 Ga. The quartzofeldspathic gneisses contain sodic rocks of the tonalite-trond-hjemite-granodiorite suite as well as potassic varieties. This suite of rocks most likely contains some lithologies derived from sedimentary or volcaniclastic sources, and there is evidence that alkali metasomatism occurred prior to or during subsequent major tectonothermal events. The entire suite of gneisses and metamorphic mafic rocks has geochemical characteristics that are indicative of an active continental arc setting, with deposition most likely in an extensional, backarc setting similar to the Mesozoic through Tertiary rocks of the eastern Sierra Nevada Mountains or Mojave Desert. The formation of these rocks represents an early, distinct stage of crustal evolution that preceded the (unconformable?) deposition of one or more platform-type sedimentary sequences (e.g., marbles, pelitic schists, quartzites, banded iron formations). All primary lithologic contacts and textures or structures indicative of possible protoliths have been largely obliterated due to transposition during Archean and Paleoproterozoic (ca. 2.4 and ca. 1.8 Ga) deformation and metamorphism.

Montana↗
USGS2004

Age and evolution of the Precambrian crust of the Tobacco Root Mountains, Montana

U-Pb analyses of zircons from gneisses, anatectic leucosome, metasedimentary rocks, and a younger (metamorphosed) mafic dike from the Tobacco Root Mountains of southwestern Montana document a Precambrian history that extends from at least 3.90–1.77 Ga. The oldest U-Pb age reported here (3.8 Ga) is from a detrital zircon from a quartzite within the Spuhler Peak Metamorphic Suite, although younger ages of clearly detrital grains suggest the protolith was deposited subsequent to 3.2 Ga. Alternatively, a Pb-Pb age of ca. 2.45 Ga from a single subhedral zircon from this quartzite suggests the quartzite, and perhaps other Spuhler Peak Metamorphic Suite lithologies, may have formed in the Proterozoic. An Archean age, however, seems most compatible with the Archean Sm-Nd model ages of mafic and metasedimentary components of the Spuhler Peak Metamorphic Suite and the age distribution of zircons from the quartzite, which is very similar to the age distribution present in Archean quartzites in the region. The Spuhler Peak Metamorphic Suite lies in tectonic contact with volumetrically dominant, Archean, quartzofeldspathic gneisses and intercalated metasedimentary rocks. The protoliths of these gneisses were apparently emplaced 3.2–3.4 Ga, and are interpreted to be the basement upon which the intercalated (meta)sedimentary rocks were deposited. U-Pb analyses of zircons from anatectic leucosome near the boundary between the gneisses and the Spuhler Peak Metamorphic Suite, however, yield a significant population of 1.77 Ga grains, which are interpreted to have crystallized from the leucosome. All other grains are Archean (to 3.48 Ga) and interpreted to derive from the metasedimentary source of the leucosome. In addition, U-Pb analyses of zircons extracted from a granulite facies mafic dike that cuts across Archean gneissic banding indicate the dike was intruded at 2.06 Ga, but reached granulite facies at 1.76 Ga. Structural, petrologic, and geochronologic data suggest all lithologies experienced granulite facies metamorphism at ca. 1.77 Ga and that the Spuhler Peak Metamorphic Suite was tectonically emplaced after 2.06 Ga, but before 1.77 Ga. This Paleoproterozoic tectonic activity is most likely a result of burial during terrane collision (e.g., the juxtaposition of the Wyoming and Hearne provinces) and/or to postcollisional mafic underplating.

Montana↗
USGS2004

Origin of the Bering Sea salient

Our investigations in Alaska and Russia show that the curved orogen of the Bering Strait region is a composite feature that formed as a result of multiple superimposed events and cannot be related to latest Cretaceous–early Tertiary east-west shortening. Relations interpreted to record east-west shortening include the Chukchi syntaxis, deformation on Seward and Chukotka Peninsulas, the map pattern of Triassic-Jurassic mafic rocks, and plate reconstructions. These relations are reviewed in light of new data and show that the curved orogen cannot have been formed by east-west shortening. For example, the Chukchi syntaxis, the northeastern limb of the orogen, is a primary structural loop that originated during the Brookian orogeny in the Early Cretaceous and therefore predates postulated oroclinal bending. East-west shortening on Seward Peninsula and Chukotka is manifest by low-amplitude, long-wavelength folds that require only small strains. The Seward Peninsula/Yukon-Koyukuk province boundary was previously interpreted as a thrust fault, but it instead may be a left-lateral strike-slip fault. Triassic-Jurassic mafic rocks similar to the Angayucham terrane are found on the northern Chukotka Peninsula, but a better correlation is with rocks farther south in the South Anyui suture zone, resulting in a less-arcuate pattern. Mid-Cretaceous north-south extension in the Bering Strait region has enhanced the curvature of the margin. Recent plate reconstructions indicate that shortening between Eurasia and North America was previously overestimated and that significant east-west convergence probably did not occur in the region during the Tertiary. We conclude that the curved orogen in the Bering Strait region is not a true orocline and instead is a composite structural feature that is best described as a salient.

GSA Special Papers↗
USGS2004

A kinematic model for the southern Alaska orocline based on regional fault patterns

Among the most prominent physiographic features of southern Alaska are a series of nested arcuate lineations, including the Denali fault, that parallel the concave-southward southern coastline of the state. These features are generally interpreted as major dextral shear zones that formed in the Late Cretaceous to early Tertiary in response to stresses imposed on the western edge of North America by transcurrent motion and oblique subduction along the North American margin. South-central Alaska consists of a collage of Paleozoic and Mesozoic tectonostratigraphic terranes and overlap assemblages. Following accretion to the continent, these terranes were transported northward along its margin along strike-slip faults such as the ancestral Denali fault that formed by oblique subduction. The terranes would have arrived at about their present position by Eocene time. It is commonly held that southwestern Alaska rotated into its present configuration by the middle Eocene, in response to impingement of northeast Asia against western Alaska, to form the southern Alaska orocline. Subsequent to this rotation during the middle and late Tertiary, southern Alaska terranes were presumably transported through the Alaska orocline by continued dextral movement along faults on the east limb of the orocline, such as the Denali and Tintina. Both initial bending of the crust to form the orocline and subsequent transport of crust through the orocline would result in significant crustal shortening within the bend. A model is suggested herein whereby shortening is accommodated by a system of secondary, northeast-trending thrust faults. The distribution of these faults shows a consistent pattern within the bend: the faults appear to splay off at or near the major dextral shear zones and generally occur west of the orocline’s axis. That these faults occur where deformation would be greatest to crust driven through the bend suggests that the faults are directly related to crustal dynamics within the bend. If this model is correct, one may infer the sense and timing of motion along many faults that otherwise lack or have limited documented histories. The interaction of strike-slip and thrust faults suggested by the model is reflected in the rupture sequence of the November 3, 2002, M7.9 Denali earthquake, which involved both initiation of slip along a previously unknown east-northeast–trending thrust fault and subsequent strike-slip motion along the McKinley strand of the east-west–trending Denali fault. This event is likely due, in part, to stresses imposed by accretion of the Yakutat terrane that is presently working its way into the bend of the orocline and deforming as a result of collision. Faulting along the western margin of the Yakutat terrane resembles that seen in central Alaska within the hinge of the bend. As such, it likely represents a present-day analog for crustal deformation associated with the orocline and may therefore provide clues to earlier stages of crustal deformation in central Alaska.

Alaska↗
USGS2005

Eastern rim of the Chesapeake Bay impact crater: Morphology, stratigraphy, and structure

This study reexamines seven reprocessed (increased vertical exaggeration) seismic reflection profiles that cross the eastern rim of the Chesapeake Bay impact crater. The eastern rim is expressed as an arcuate ridge that borders the crater in a fashion typical of the "raised" rim documented in many well preserved complex impact craters. The inner boundary of the eastern rim (rim wall) is formed by a series of raterfacing, steep scarps, 15-60 m high. In combination, these rim-wall scarps represent the footwalls of a system of crater-encircling normal faults, which are downthrown toward the crater. Outboard of the rim wall are several additional normal-fault blocks, whose bounding faults trend approximately parallel to the rim wall. The tops of the outboard fault blocks form two distinct, parallel, flat or gently sloping, terraces. The innermost terrace (Terrace 1) can be identified on each profile, but Terrace 2 is only sporadically present. The terraced fault blocks are composed mainly of nonmarine, poorly to moderately consolidated, siliciclastic sediments, belonging to the Lower Cretaceous Potomac Formation. Though the ridge-forming geometry of the eastern rim gives the appearance of a raised compressional feature, no compelling evidence of compressive forces is evident in the profiles studied. The structural mode, instead, is that of extension, with the clear dominance of normal faulting as the extensional mechanism.

Chesapeake Bay↗
USGS2005

Recent research on the Chesapeake Bay impact structure, USA - Impact debris and reworked ejecta

Four new coreholes in the western annular trough of the buried, late Eocene Chesapeake Bay impact structure provide samples of shocked minerals, cataclastic rocks, possible impact melt, mixed sediments, and damaged microfossils. Parautochthonous Cretaceous sediments show an upward increase in collapse, sand fluidization, and mixed sediment injections. These impact-modified sediments are scoured and covered by the upper Eocene Exmore beds, which consist of highly mixed Cretaceous to Eocene sediment clasts and minor crystalline-rock clasts in a muddy quartz-glauconite sand matrix. The Exmore beds are interpreted as seawater-resurge debris flows. Shocked quartz is found as sparse grains and in rock fragments at all four sites in the Exmore, where these fallback remnants are mixed into the resurge deposit. Crystalline-rock clasts that exhibit shocked quartz or cataclastic fabrics include felsites, granitoids, and other plutonic rocks. Felsite from a monomict cataclasite boulder has a sensitive high-resolution ion microprobe U-Pb zircon age of 613 ± 4 Ma. Leucogranite from a polymict cataclasite boulder has a similar Neoproterozoic age based on muscovite 40 Ar/ 39 Ar data. Potassium-feldspar 40 Ar/ 39 Ar ages from this leucogranite show cooling through closure (∼150 °C) at ca. 261 Ma without discernible impact heating. Spherulitic felsite is under investigation as a possible impact melt. Types of crystalline clasts, and exotic sediment clasts and grains, in the Exmore vary according to location, which suggests different provenances across the structure. Fractured calcareous nannofossils and fused, bubbled, and curled dinoflagellate cysts coexist with shocked quartz in the Exmore, and this damage may record conditions of heat, pressure, and abrasion due to impact in a shallow-marine environment.

Special Papers of the Geological Society of Americ↗
USGS2005

Late Devonian Alamo Impact, southern Nevada, USA: Evidence of size, marine site, and widespread effects

The early Late Devonian (early Frasnian) Alamo Impact targeted an oceanic, off-platform site in southern Nevada, excavating a crater with a final diameter of 44–65 km. The original crater is now dismembered and buried beneath younger rocks. Consequently, its size and site must be deduced through multiple converging lines of geological and paleontological evidence. Previous and new evidence includes the catastrophically emplaced Alamo Breccia, tsunamites, shock-metamorphosed quartz grains, carbonate accretionary lapilli, an iridium anomaly, sub-Breccia clastic injection, deep-water Breccia channels, and ejecta material. We now demonstrate, on the basis of conodont microfossils in carbonate ejecta clasts within lapillistone blocks and widely distributed shocked-quartz and lithic-clast ejecta within the upper part of the Breccia, that the Alamo Impact excavated down at least into Upper Cambrian strata, at a depth of 1.7 km, and possibly into the underlying Proterozoic–Lower Cambrian Prospect Mountain Quartzite, ∼2.5 km beneath the Late Devonian seafloor. Distal tsunamites and probable ejecta are now documented as far north as Devils Gate, northern Nevada, and as far northeast as the Confusion Range, western Utah. A charcoal-bearing, early Frasnian estuarine deposit in the Bighorn Mountains, Wyoming, may provide the first evidence of an Alamo Impact fallout-generated forest fire. Our new data further document the widespread effects and size of the Alamo Impact, and constrain the likely present position of the tectonically transported crater to an area between the Timpahute and Hot Creek Ranges, southern Nevada.

Nevada↗
USGS2005

Reconnaissance study of late quaternary faulting along Cerro Goden fault zone, western Puerto Rico

The Cerro Goden fault zone is associated with a curvilinear, continuous, and prominent topographic lineament in western Puerto Rico. The fault varies in strike from northwest to west. In its westernmost section, the fault is ∼500 m south of an abrupt, curvilinear mountain front separating the 270- to 361-m-high La Cadena de San Francisco range from the Rio Añasco alluvial valley. The Quaternary fault of the Añasco Valley is in alignment with the bedrock fault mapped by D. McIntyre (1971) in the Central La Plata quadrangle sheet east of Añasco Valley. Previous workers have postulated that the Cerro Goden fault zone continues southeast from the Añasco Valley and merges with the Great Southern Puerto Rico fault zone of south-central Puerto Rico. West of the Añasco Valley, the fault continues offshore into the Mona Passage (Caribbean Sea) where it is characterized by offsets of seafloor sediments estimated to be of late Quaternary age. Using both 1:18,500 scale air photographs taken in 1936 and 1:40,000 scale photographs taken by the U.S. Department of Agriculture in 1986, we identified geomorphic features suggestive of Quaternary fault movement in the Añasco Valley, including aligned and deflected drainages, apparently offset terrace risers, and mountain-facing scarps. Many of these features suggest right-lateral displacement. Mapping of Paleogene bedrock units in the uplifted La Cadena range adjacent to the Cerro Goden fault zone reveals the main tectonic events that have culminated in late Quaternary normal-oblique displacement across the Cerro Goden fault. Cretaceous to Eocene rocks of the La Cadena range exhibit large folds with wavelengths of several kms. The orientation of folds and analysis of fault striations within the folds indicate that the folds formed by northeast-southwest shortening in present-day geographic coordinates. The age of deformation is well constrained as late Eocene–early Oligocene by an angular unconformity separating folded, deep-marine middle Eocene rocks from transgressive, shallow-marine rocks of middle-upper Oligocene age. Rocks of middle Oligocene–early Pliocene age above unconformity are gently folded about the roughly east-west–trending Puerto Rico–Virgin Islands arch, which is well expressed in the geomorphology of western Puerto Rico. Arching appears ongoing because onshore and offshore late Quaternary oblique-slip faults closely parallel the complexly deformed crest of the arch and appear to be related to extensional strains focused in the crest of the arch. We estimate ∼4 km of vertical throw on the Cerro Goden fault based on the position of the carbonate cap north of the fault in the La Cadena de San Francisco and its position south of the fault inferred from seismic reflection data in Mayaguez Bay. Based on these observations, our interpretation of the kinematics and history of the Cerro Goden fault zone includes two major phases of motion: (1) Eocene northeast-southwest shortening possibly accompanied by left-lateral shearing as determined by previous workers on the Great Southern Puerto Rico fault zone; and (2) post–early Pliocene regional arching of Puerto Rico accompanied by normal offset and right-lateral shear along faults flanking the crest of the arch. The second phase of deformation accompanied east-west opening of the Mona rift and is inferred to continue to the present day.

Puerto Rico↗
USGS2005

Paleoseismic study of the South Lajas fault: First documentation of an onshore Holocene fault in Puerto Rico

The island of Puerto Rico is located within the complex boundary between the North America and Caribbean plates. The relative motion along this boundary is dominantly left-lateral strike slip, but compression and extension are locally significant. Although tectonic models proposed for the region suggest the presence of onshore active faults in Puerto Rico, no faults with Holocene displacement have been documented on the island before this study. Current seismic hazard assessments primarily consider only the impact of distant, offshore seismic sources because onshore fault hazard is unknown. Our mapping and trenching studies demonstrate Holocene surface rupture on a previously undocumented fault in southwestern Puerto Rico. We excavated a trench across a scarp near the southern edge of the Lajas Valley that exposed a narrow fault zone disrupting alluvial deposits. Structural relations indicate valley-side-down fault slip, with a component of strike-slip motion. Radiocarbon analyses of organic material collected from the sediments suggest that the most recent surface rupture occurred during the past 5000 yr, but no minimum age has yet been established. This fault may be part of a larger fault zone that extends from the western end of the Lajas Valley toward Ponce, the second largest city in Puerto Rico. ?? 2005 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2005

Liquefaction induced by historic and prehistoric earthquakes in western Puerto Rico

Dozens of liquefaction features in western Puerto Rico probably formed during at least three large earthquakes since A.D. 1300. Many of the features formed during the 1918 moment magnitude (M) 7.3 event and the 1670 event, which may have been as large as M 7 and centered in the Añasco River Valley. Liquefaction features along Río Culebrinas, and possibly a few along Río Grande de Añasco, appear to have formed ca. A.D. 1300–1508 as the result of a M ≥ 6.5 earthquake. We conducted reconnaissance along Río Culebrinas, Río Grande de Añasco, and Río Guanajibo, where we found and studied numerous liquefaction features, dated organic samples occurring in association with liquefaction features, and performed liquefaction potential analysis with geotechnical data previously collected along the three rivers. Our ongoing study will provide additional information regarding the age and size distribution of liquefaction features along the western, northern, and eastern coasts and will help to improve estimates of the timing, source areas, and magnitudes of earthquakes that struck Puerto Rico during the late Holocene.

Añasco River Valley, Río Culebrinas, Río Grande de↗
USGS2005

Subtle structural influences on coal thickness and distribution: Examples from the Lower Broas-Stockton coal (Middle Pennsylvanian), Eastern Kentucky Coal Field, USA

The Lower Broas-Stockton coal is a heavily mined coal of the Central Appalachian Basin. Coal thickness, distribution, composition, and stratigraphic position were compared with basement structure, gas and oil field trends, and sequence strat- igraphic and paleoclimate interpretations to better understand the geology of the Stockton coal bed in eastern Kentucky. The thickest coal occurs south of the Warfield structural trend and east of the Paint Creek Uplift, two basement-related structures. Along the Warfield trend, coal beds in the underlying Peach Orchard coal zone locally merge with the Stockton coal to form a seam more than 3 m thick. Other areas of thick coal occur in elongate trends. Two pairs of elongate, conjugate trends in Stockton coal thickness are interpreted as regional paleofractures that influenced paleotopography and groundwater during peat accumulation. Compositional group analyses indicate that the Stockton peat infilled depressions in the paleotopography as a topogenous to soligenous mire codominated by tree ferns and lycopsid trees. Flooding from adjacent paleochannels is indicated by partings and seam splits along the margins of the mineable coal body. One or more increments of low-vitrinite coal, dominated by tree ferns and shrubby, Densosporites-producing lycopsids occur at all sample sites. Similar assemblages have been previously used to identify ombrogenous, domed mire origins for Early and Middle Pennsylvanian coals in which ash yields were less than 10%. It is difficult, however, to reconcile ombrogenous conditions with the partings in the Stockton coal in this area. Low-ash, low-vitrinite increments may have been formed in topogenous to soligenous mires with periodic drying or water-table fluctuations, rather than widespread doming. This is consistent with interpretations of increasingly seasonal paleoclimates in the late Middle and Late Pennsylvanian and fracture-influenced groundwater conditions. ??2005 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2005

Palynology in coal systems analysis-The key to floras, climate, and stratigraphy of coal-forming environments

Palynology can be effectively used in coal systems analysis to understand the nature of ancient coal-forming peat mires. Pollen and spores preserved in coal effectively reveal the floristic composition of mires, which differed substantially through geologic time, and contribute to determination of depositional environment and paleo- climate. Such applications are most effective when integrated with paleobotanical and coal-petrographic data. Examples of previous studies of Miocene, Carboniferous, and Paleogene coal beds illustrate the methods and results. Palynological age determinations and correlations of deposits are also important in coal systems analysis to establish stratigraphic setting. Application to studies of coalbed methane generation shows potential because certain kinds of pollen are associated with gas-prone lithotypes. ??2005 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2005

Appalachian coal assessment: Defining the coal systems of the Appalachian basin

The coal systems concept may be used to organize the geologic data for a relatively large, complex area, such as the Appalachian basin, in order to facilitate coal assessments in the area. The concept is especially valuable in subjective assessments of future coal production, which would require a detailed understanding of the coal geology and coal chemistry of the region. In addition, subjective assessments of future coal production would be enhanced by a geographical information system that contains the geologic and geochemical data commonly prepared for conventional coal assessments. Coal systems are generally defined as one or more coal beds or groups of coal beds that have had the same or similar genetic history from their inception as peat deposits, through their burial, diagenesis, and epigenesis to their ultimate preservation as lignite, bituminous coal, or anthracite. The central and northern parts of the Appalachian basin contain seven coal systems (Coal Systems A-G). These systems may be defined generally on the following criteria: (1) on the primary characteristics of their paleopeat deposits, (2) on the stratigraphic framework of the Paleozoic coal measures, (3) on the relative abundance of coal beds within the major stratigraphic groupings, (4) on the amount of sulfur related to the geologic and climatic conditions under which paleopeat deposits accumulated, and (5) on the rank of the coal (lignite to anthracite). ??2005 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2005

Paleoproterozoic Mojave Province in northwestern Mexico? Isotopic and U-Pb zircon geochronologic studies of Precambrian and Cambrian crystalline and sedimentary rocks, Caborca, Sonora

Whole-rock Nd isotopic data and U-Pb zircon geochronology from Precambrian crystalline rocks in the Caborca area, northern Sonora, reveal that these rocks are most likely a segment of the Paleoproterozoic Mojave province. Supporting this conclusion are the observations that paragneiss from the > or =1.75 Ga Bamori Complex has a 2.4 Ga Nd model age and contains detrital zircons ranging in age from Paleoproterozoic (1.75 Ga) to Archean (3.2 Ga). Paragneisses with similar age and isotopic characteristics occur in the Mojave province in southern California. In addition, "A-type" granite exposed at the southern end of Cerro Rajon has ca 2.0 Ga Nd model age and a U-Pb zircon age of 1.71 Ga, which are similar to those of Paleoproterozoic granites in the Mojave province. Unlike the U.S. Mojave province, the Caborcan crust contains ca. 1.1 Ga granite (Aibo Granite), which our new Nd isotopic data suggest is largely the product of anatexis of the local Precambrian basement. Detrital zircons from Neoproterozoic to early Cambrian miogeoclinal arenites at Caborca show dominant populations ca. 1.7 Ga, ca. 1.4 Ga, and ca. 1.1 Ga, with subordinate Early Cambrian and Archean zircons. These zircons were likely derived predominately from North American crust to the east and northeast, and not from the underlying Caborcan basement. The general age and isotopic similarities between Mojave province basement and overlying miogeoclinal sedimentary rocks in Sonora and southern California is necessary, but not sufficient, proof of the hypothesis that Sonoran crust is allochthonous and was transported to its current position during the Mesozoic along the proposed Mojave-Sonora megashear. One viable alternative model is that the Caborcan Precambrian crust is an isolated, autochthonous segment of Mojave province crust that shares a similar, but not identical, Proterozoic geological history with Mojave province crust found in the southwest United States.

Sonora↗
USGS2005

Evidence for Mojave-Sonora megashear-Systematic left-lateral offset of Neoproterozoic to Lower Jurassic strata and facies, western United States and northwestern Mexico

Major successions as well as individual units of Neoproterozoic to Lower Jurassic strata and facies appear to be systematically offset left laterally from eastern California and western Nevada in the western United States to Sonora, Mexico. This pattern is most evident in units such as the “Johnnie oolite,” a 1- to 2-m-thick oolite of the Neoproterozoic Rainstorm Member of the Johnnie Formation in the western United States and of the Clemente Formation in Sonora. The pattern is also evident in the Lower Cambrian Zabriskie Quartzite of the western United States and the correlative Proveedora Quartzite in Sonora. Matching of isopach lines of the Zabriskie Quartzite and Proveedora Quartzite suggests ∼700–800 km of left-lateral offset. The offset pattern is also apparent in the distribution of distinctive lithologic types, unconformities, and fossil assemblages in other rocks ranging in age from Neoproterozoic to Early Jurassic. In the western United States, the distribution of facies in Neoproterozoic and Paleozoic strata indicates that the Cordilleran miogeocline trends north-south. A north-south trend is also suggested in Sonora, and if so is compatible with offset of the miogeocline but not with the ideas that the miogeocline wrapped around the continental margin and trends east-west in Sonora. An imperfect stratigraphic match of supposed offset segments along the megashear is apparent. Some units, such as the “Johnnie oolite” and Zabriskie-Proveedora, show almost perfect correspondence, but other units are significantly different. The differences seem to indicate that the indigenous succession of the western United States and offset segments in Mexico were not precisely side by side before offset but were separated by an area—now buried, eroded, or destroyed—that contained strata of intermediate facies.

Baja California, California, Nevada, Sonora, Utah↗
USGS2005

Middle Jurassic Topawa group, Baboquivari Mountains, south-central Arizona: Volcanic and sedimentary record of deep basins within the Jurassic magmatic arc

Among supracrustal sequences of the Jurassic magmatic arc of the southwestern Cordillera, the Middle Jurassic Topawa Group, Baboquivari Mountains, south-central Arizona, is remarkable for its lithologic diversity and substantial stratigraphic thickness, ???8 km. The Topawa Group comprises four units (in order of decreasing age): (1) Ali Molina Formation-largely pyroclastic rhyolite with interlayered eolian and fluvial arenite, and overlying conglomerate and sandstone; (2) Pitoikam Formation-conglomerate, sedimentary breccia, and sandstone overlain by interbedded silt- stone and sandstone; (3) Mulberry Wash Formation-rhyolite lava flows, flow breccias, and mass-flow breccias, with intercalated intraformational conglomerate, sedimentary breccia, and sandstone, plus sparse within-plate alkali basalt and comendite in the upper part; and (4) Tinaja Spring Porphyry-intrusive rhyolite. The Mulberry Wash alkali basalt and comendite are genetically unrelated to the dominant calcalkaline rhyolite. U-Pb isotopic analyses of zircon from volcanic and intrusive rocks indicate the Topawa Group, despite its considerable thickness, represents only several million years of Middle Jurassic time, between approximately 170 and 165 Ma. Sedimentary rocks of the Topawa Group record mixing of detritus from a minimum of three sources: a dominant local source of porphyritic silicic volcanic and subvolcanic rocks, identical or similar to those of the Topawa Group itself; Meso- proterozoic or Cambrian conglomerates in central or southeast Arizona, which contributed well-rounded, highly durable, polycyclic quartzite pebbles; and eolian sand fields, related to Middle Jurassic ergs that lay to the north of the magmatic arc and are now preserved on the Colorado Plateau. As the Topawa Group evidently represents only a relatively short interval of time, it does not record long-term evolution of the Jurassic magmatic arc, but rather represents a Middle Jurassic "stratigraphic snapshot" of the arc. This particular view of the arc has been preserved primarily because the Topawa Group accumulated in deep intra-arc basins. These nonmarine basins were fundamentally tectonic and extensional, rather than volcano-tectonic, in origin. Evidence from the Topawa Group supports two previous paleogeographic inferences: the Middle Jurassic magmatic arc in southern Arizona was relatively low standing, and externally derived sediment was introduced into the arc from the continent (northeast) side, without appreciable travel along the arc. We speculate that because the Topawa Group intra-arc basins were deep and rapidly subsiding, they became the locus of a major (though probably intermittent) fluvial system, which flowed into the low-standing magmatic arc from its northeast flank. ?? 2005 Geological Society of America.

Special Paper of the Geological Society of America↗