Search USGSSearch

SEARCH · Search USGS

Results for “Research Information Letter”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Monitoring network changes during the 2018 Kīlauea Volcano eruption

In the summer of 2018, Kīlauea Volcano underwent one of its most significant eruptions in the past few hundred years. The volcano’s summit and East Rift Zone magma system partially drained, resulting in a series of occasionally explosive partial caldera collapses, and widespread lava flows in the lower East Rift Zone. The Hawaiian Volcano Observatory (HVO) operates a robust permanent monitoring network of about 250 stations, recording a variety of real‐time data streams: seismic (short‐period, broadband, strong‐motion), infrasound, Global Navigation Satellite Systems (GNSS), tilt, camera, laser rangefinder, and gas geochemistry. During the eruption, HVO staff quickly established 35 new temporary monitoring stations, to better constrain evolving volcanic hazards. The partial collapses of the caldera threatened to disrupt important telemetry links in the HVO monitoring network, and a major effort was undertaken in the midst of the eruption crisis to reroute radio telemetry and maintain continuity of data flow. In the process, a new data center was established in Hilo, to mitigate a long‐standing potential single point of failure at the HVO facility. Over the course of the eruption from May through August, lava, ashfall, wildfire, and cliff collapse destroyed or disabled 36 stations. Thousands of earthquakes damaged the main HVO facility at Uēkahuna Bluff, causing staff to evacuate the building and relocate observatory operations in the midst of the eruption response, adding more complexity to the response effort. Throughout these events, the HVO team maintained the monitoring network, provided timely information to the public and emergency managers, and collected valuable scientific data to better understand Kīlauea Volcano.

Hawaii

Opportunities and challenges for incorporating lithium-ion batteries into geophysical power systems

Batteries play a critical role at seismic and other geophysical stations in ensuring that the equipment receives uninterrupted power to make continuous observations of the Earth. Often sited in remote environments under a wide range of environmental conditions, these stations have almost ubiquitously used conventional lead‐acid batteries. However, recent advances in rechargeable lithium‐ion battery technology have led to the development of lithium‐iron phosphate (LFP) batteries that can replace lead‐acid batteries in energy storage systems. In the past three years, LFP battery production has grown over an order of magnitude, reducing their cost and increasing their availability. In this article, we examine the benefits and challenges associated with incorporating several types of LFP batteries into the power systems of geophysical stations. We review how fundamental differences in battery chemistry enable LFP batteries to weigh less than half of comparable lead‐acid batteries and may have longer service lives but have the added complexity of being managed by an integrated battery monitoring system (BMS) microcontroller. Through a controlled heat chamber experiment, we demonstrate that LFP batteries can be ideally suited for use in high‐temperature environments by offering longer service lives than lead‐acid batteries. However, for safety reasons, the BMS prevents most LFP batteries from being charged at temperatures <0°C, which complicates their use in colder regions and can lead to equipment damage if the charging system is not appropriately designed for this battery type. Finally, we address some of the unique challenges associated with adopting lithium batteries, including unexpected substantial (≤14 W) power consumption from the BMS, safety concerns, and shipping restrictions. It is our goal to help inform station operators and geophysicists about potential benefits and issues that can arise from using LFP batteries at seismic and geophysical stations in a range of environments.

Seismological Research Letters

Spatially variable stage-driven groundwater-surface water interaction inferred from time-frequency analysis of distributed temperature sensing data

Characterization of groundwater-surface water exchange is essential for improving understanding of contaminant transport between aquifers and rivers. Fiber-optic distributed temperature sensing (FODTS) provides rich spatiotemporal datasets for quantitative and qualitative analysis of groundwater-surface water exchange. We demonstrate how time-frequency analysis of FODTS and synchronous river stage time series from the Columbia River adjacent to the Hanford 300-Area, Richland, Washington, provides spatial information on the strength of stage-driven exchange of uranium contaminated groundwater in response to subsurface heterogeneity. Although used in previous studies, the stage-temperature correlation coefficient proved an unreliable indicator of the stage-driven forcing on groundwater discharge in the presence of other factors influencing river water temperature. In contrast, S-transform analysis of the stage and FODTS data definitively identifies the spatial distribution of discharge zones and provided information on the dominant forcing periods (≥2 d) of the complex dam operations driving stage fluctuations and hence groundwater-surface water exchange at the 300-Area.

Washington

Seismic‐hazard forecast for 2016 including induced and natural earthquakes in the central and eastern United States

The U.S. Geological Survey (USGS) has produced a one‐year (2016) probabilistic seismic‐hazard assessment for the central and eastern United States (CEUS) that includes contributions from both induced and natural earthquakes that are constructed with probabilistic methods using alternative data and inputs. This hazard assessment builds on our 2016 final model ( Petersen et al. , 2016 ) by adding sensitivity studies, illustrating hazard in new ways, incorporating new population data, and discussing potential improvements. The model considers short‐term seismic activity rates (primarily 2014–2015) and assumes that the activity rates will remain stationary over short time intervals. The final model considers different ways of categorizing induced and natural earthquakes by incorporating two equally weighted earthquake rate submodels that are composed of alternative earthquake inputs for catalog duration, smoothing parameters, maximum magnitudes, and ground‐motion models. These alternatives represent uncertainties on how we calculate earthquake occurrence and the diversity of opinion within the science community. In this article, we also test sensitivity to the minimum moment magnitude between M 4 and M 4.7 and the choice of applying a declustered catalog with b =1.0 rather than the full catalog with b =1.3. We incorporate two earthquake rate submodels: in the informed submodel we classify earthquakes as induced or natural, and in the adaptive submodel we do not differentiate. The alternative submodel hazard maps both depict high hazard and these are combined in the final model. Results depict several ground‐shaking measures as well as intensity and include maps showing a high‐hazard level (1% probability of exceedance in 1 year or greater). Ground motions reach 0.6 g horizontal peak ground acceleration (PGA) in north‐central Oklahoma and southern Kansas, and about 0.2 g PGA in the Raton basin of Colorado and New Mexico, in central Arkansas, and in north‐central Texas near Dallas–Fort Worth. The chance of having levels of ground motions corresponding to modified Mercalli intensity (MMI) VI or greater earthquake shaking is 2%–12% per year in north‐central Oklahoma and southern Kansas and New Madrid similar to the chance of damage at sites in high‐hazard portions of California caused by natural earthquakes. Hazard is also significant in the Raton basin of Colorado/New Mexico; north‐central Arkansas; Dallas–Fort Worth, Texas; and in a few other areas. Hazard probabilities are much lower (by about half or more) for exceeding MMI VII or VIII. Hazard is 3‐ to 10‐fold higher near some areas of active‐induced earthquakes than in the 2014 USGS National Seismic Hazard Model (NSHM), which did not consider induced earthquakes. This study in conjunction with the LandScan TM Database (2013) indicates that about 8 million people live in areas of active injection wells that have a greater than 1% chance of experiencing damaging ground shaking (MMI≥VI) in 2016. The final model has high uncertainty, and engineers, regulators, and industry should use these assessments cautiously to make informed decisions on mitigating the potential effects of induced and natural earthquakes.

Seismological Research Letters

The 2019 Ridgecrest, California, earthquake sequence ground motions: Processed records and derived intensity metrics

Following the 2019 Ridgecrest, California, earthquake sequence, we compiled ground‐motion records from multiple data centers and processed these records using newly developed ground‐motion processing software that performs quality assurance checks, performs standard time series processing steps, and computes a wide range of ground‐motion metrics. In addition, we compute station and waveform metrics such as the time‐averaged shear‐wave velocity to 30 m depth ( ⁠ V S 30 "> V S 30 ⁠ ), finite‐rupture distances, and spectral accelerations. This data set includes 22,708 records from 133 events from 4 July 2019 (UTC) to 18 October 2019 with a magnitude range from 3.6 to 7.1. We expect that the rapid collection and dissemination of this information will facilitate detailed studies of these ground motions. In this article, we describe the data selection, processing steps, and how to access the data.

California

Uncertainties in intensity-based earthquake magnitude estimates

Estimating the magnitude of historical earthquakes is crucial for assessing seismic hazard. Magnitudes of early‐instrumental earthquakes can be inferred using a combination of instrumental records, field observations, and the observed distribution of shaking intensity determined from macroseismic observations. For earthquakes before 1900, shaking intensity distributions often provide the only information to constrain earthquake magnitude. Considerable effort has been made to develop methods to estimate the magnitude of moderate‐to‐large historical earthquakes using shaking intensities derived from macroseismic data. In this study, we consider earthquakes in California with known instrumental magnitudes to explore uncertainties in estimating the magnitude of historical earthquakes from intensity information alone. We use three California‐specific intensity prediction equations (IPEs) and an IPE based on a global ground‐motion model (GMM) to determine optimum intensity‐based magnitudes for 33 moderate‐to‐large California earthquakes between 1979 and 2021. Intensity‐based magnitudes are close to instrumental magnitudes on average. However, intensity‐based magnitudes for individual events differ by as much as 2.2 magnitude units from instrumental magnitudes. This result reflects the weak dependence of ground motions and shaking intensities on moment magnitude and their strong dependence on stress drop. Considering the intensity distributions of the 1906 San Francisco and 1989 Loma Prieta earthquakes, we show that information that could constrain rupture length is discarded when considering only the 2D decay of intensity with distance. We also show that ground‐motion intensity conversion equations used in a GMM‐based approach may cause a systematic overestimation of large historical earthquake magnitudes. This study underscores both the reducible and potentially irreducible uncertainties associated with using intensity data to estimate magnitudes of historical earthquakes using IPEs and highlights the value of using additional information to constrain rupture dimensions. Using intensity observations alone, moment magnitude uncertainties are typically on the order of a full unit.

California

The magnitude and origin of groundwater discharge to eastern U.S. and Gulf of Mexico coastal waters

Fresh groundwater discharge to coastal environments contributes to the physical and chemical conditions of coastal waters, but the role of coastal groundwater at regional to continental scales remains poorly defined due to diverse hydrologic conditions and the difficulty of tracking coastal groundwater flow paths through heterogeneous subsurface materials. We use three-dimensional groundwater flow models for the first time to calculate the magnitude and source areas of groundwater discharge from unconfined aquifers to coastal waterbodies along the entire eastern U.S. We find that 27.1 km 3 /yr (22.8–30.5 km 3 /yr) of groundwater directly enters eastern U.S. and Gulf of Mexico coastal waters. The contributing recharge areas comprised ~175,000 km 2 of U.S. land area, extending several kilometers inland. This result provides new information on the land area that can supply natural and anthropogenic constituents to coastal waters via groundwater discharge, thereby defining the subterranean domain potentially affecting coastal chemical budgets and ecosystem processes.

Gulf of Mexico

Imaging the tectonic grain of the Northern Cordillera orogen using Transportable Array receiver functions

Azimuthal variations in receiver function conversions can image lithospheric structural contrasts and anisotropic fabrics that together compose tectonic grain. We apply this method to data from EarthScope Transportable Array in Alaska and additional stations across the northern Cordillera. The best‐resolved quantities are the strike and depth of dipping fabric contrasts or interfaces. We find a strong geographic gradient in such anomalies, with large amplitudes extending inboard from the present‐day subduction margin, the Aleutian arc, and an influence of flat‐slab subduction of the Yakutat microplate north of the Denali fault. An east–west band across interior Alaska shows low‐amplitude crustal anomalies. Anomaly amplitudes correlate with structural intensity (density of aligned geological elements), but are the highest in areas of strong Cenozoic deformation, raising the question of an influence of current stress state. Imaged subsurface strikes show alignment with surface structures. We see concentric strikes around arc volcanoes implying dipping magmatic structures and fabric into the middle crust. Regions with present‐day weaker deformation show lower anomaly amplitudes but structurally aligned strikes, suggesting pre‐Cenozoic fabrics may have been overprinted or otherwise modified. We observe general coherence of the signal across the brittle‐plastic transition. Imaged crustal fabrics are aligned with major faults and shear zones, whereas intrafault blocks show imaged strikes both parallel to and at high angles to major block‐bounding faults. High‐angle strikes are subparallel to neotectonic deformation, seismicity, fault lineaments, and prominent metallogenic belts, possibly due to overprinting and/or co‐evolution with fault‐parallel fabrics. We suggest that the underlying tectonic grain in the northern Cordillera is broadly distributed rather than strongly localized. Receiver functions thus reveal key information about the nature and continuity of tectonic fabrics at depth and can provide unique insights into the deformation history and distribution of regional strain in complex orogenic belts.

Alaska

Remote sensing of river discharge based on critical flow theory

Critical flow theory provides a physical foundation for inferring discharge from measurements of wavelength and channel width made from images. In rivers with hydraulically steep local slopes greater than ∼0.01, flow velocities are high and the Froude number F r (ratio of inertial to gravitational forces) can approach 1.0 (critical flow) or greater. Under these conditions, undular hydraulic jumps (UHJ's) can form as standing wave trains at slope transitions or constrictions. The presence of UHJ's indicates that mean F r ≈ 1, implying that the velocity and depth of the flow and the spacing of the waves are uniquely related to one another. Discharges estimated from 82 Google Earth images agreed closely with discharges recorded at gaging stations ( R 2 = 0.98), with a mean bias of 1% ± 11%. This approach could provide reliable discharge information in many fluvial environments where critical flow occurs, which tend to be underrepresented in gage networks

Geophysical Research Letters

Performance of the Taiwan Rapid Earthquake Information Release System (RTD) during the 1999 Chi-Chi (Taiwan) Earthquake

A major earthquake occurred near the town of Chi-Chi in Nantou County, Taiwan, at 1:47 am (local time), 21 September 1999, about 150 km south of Taipei. This is the largest earthquake to have occurred on land in Taiwan during the 20th century. Although Taiwan has an earthquake building code, thousands of buildings collapsed due to the earthquake, leaving more than 100,000 people homeless. The death toll exceeded 2,300 with more than 10,000 injured. Within 102 seconds after the earthquake's origin time, a good estimate of the hypocenter (23.87° N, 120.75° E, Depth = 10 km) and magnitude ( M L = 7.3), and a shaking map were determined automatically by the RTD system. The result was immediately disseminated to governmental emergency response agencies electronically in four ways, by e-mail, World Wide Web, fax, and pager. This rapid information system has been successfully operating in Taiwan for more than four years. During the Chi-Chi earthquake, the rapid availability of earthquake information facilitated the emergency response. The RTD system worked very well throughout the whole aftershock sequence (several aftershocks had local magnitude of 6 or larger). Again this timely information was useful to the emergency response teams. In this paper, we briefly describe the RTD system and summarize its performance during the Chi-Chi earthquake.

Seismological Research Letters

Livestock removal increases plant cover across a heterogeneous dryland landscape on the Colorado Plateau

Livestock removal is increasingly used as a management option to mitigate the negative impacts of grazing-related disturbances on rangelands. Removal generally increases plant cover, but it is unclear when, where, and by how much plant and soil cover changes can be expected. On the Colorado Plateau, complex geology, topography, soils, and climate all interact to mediate the relationship between land cover, climate, and disturbance. In this study we used new developments in land cover mapping and analysis to assess landscape plant and bare soil cover up to 30 years after livestock removal from two grazing allotments in Capitol Reef National Park, Utah, USA. Results indicate that livestock removal increases plant cover 0.17-0.32% per year and reduces bare soil cover 0.34-0.41% per year, although these rates may be suppressed by warming temperatures. Soils, assessed through Soil Geomorphic Units, played a strong but complex role in mediating land cover changes through time. These results suggest that livestock removal is an effective strategy for increasing plant cover and reducing bare soil on the Colorado Plateau, but including soil information in decision making will enhance efficiency by improving manager's ability to prioritize management actions effectively across space and through time.

Environmental Research Letters

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming

Clays are not created equal: How clay mineral type affects soil parameterization

Clay minerals dominate the soil colloidal fraction and its specific surface area. Differences among clay mineral types significantly influence their effects on soil hydrological and mechanical behavior. Presently, the soil clay content is used to parameterize soil hydraulic and mechanical properties (SHMP) for land surface models while disregarding the type of clay mineral. This undifferentiated use of clay leads to inconsistent parameterization, particularly between tropical and temperate soils, as shown herein. We capitalize on recent global maps of clay minerals that exhibit strong climatic and spatial segregation of active and inactive clays to consider spatially resolved clay mineral types in SHMP estimation. Clay mineral-informed pedotransfer functions and machine learning algorithms trained with datasets including different clay types and soil structure formation processes improve SHMP representation regionally with broad implications for hydrological and geomechanical Earth surface processes.

Geophysical Research Letters

Ground-motion amplification in Cook Inlet region, Alaska from intermediate-depth earthquakes, including the 2018 MW=7.1 Anchorage earthquake

We measure pseudospectral and peak ground motions from 44 intermediate‐depth M w &#x2265; 4.9 "> M w ≥ 4.9 earthquakes in the Cook Inlet region of southern Alaska, including those from the 2018 M w "> M w 7.1 earthquake near Anchorage, to identify regional amplification features ( ⁠ 0.1 &#x2013; 5 &#x2009;&#x2009; s "> 0.1 – 5 s period). Ground‐motion residuals are computed with respect to an empirical ground‐motion model for intraslab subduction earthquakes, and we compute bias, between‐, and within‐event terms through a linear mixed‐effects regression. Between‐event residuals are analyzed to assess the relative source characteristics of the Cook Inlet earthquakes and suggest a difference in the scaling of the source with depth, relative to global observations. The within‐event residuals are analyzed to investigate regional amplification, and various spatial patterns manifest, including correlations of amplification with depth of the Cook Inlet basin and varying amplifications east and west of the center of the basin. Three earthquake clusters are analyzed separately and indicate spatial amplification patterns that depend on source location and exhibit variations in the depth scaling of long‐period basin amplification. The observations inform future seismic hazard modeling efforts in the Cook Inlet region. More broadly, they suggest a greater complexity of basin and regional amplification than is currently used in seismic hazard analyses.

Alaska

UAS-Based Observations of Infrasound Directionality at Stromboli Volcano, Italy

Infrasound (low frequency sound waves) can be used to monitor and characterize volcanic eruptions. However, infrasound sensors are usually placed on the ground, thus providing a limited sampling of the acoustic radiation pattern that can bias source size estimates. We present observations of explosive eruptions from a novel uncrewed aircraft system (UAS)-based infrasound sensor platform that was strategically hovered near the active vents of Stromboli volcano, Italy. We captured eruption infrasound from short-duration explosions and jetting events. While potential vertical directionality was inconclusive for the short-duration explosion, we find that jetting events exhibit vertical sound directionality that was observed with a UAS close to vertical. This directionality would not have been observed using only traditional deployments of ground-based infrasound sensors, but is consistent with jet noise theory. This proof-of-concept study provides unique information that can improve our ability to characterize and quantify the directionality of volcanic eruptions and their associated hazards.

Stromboli Volcano

The Red Atrapa Sismos (Quake Catcher Network in Mexico): assessing performance during large and damaging earthquakes.

The Quake‐Catcher Network (QCN) is an expanding seismic array made possible by thousands of participants who volunteered time and resources from their computers to record seismic data using low‐cost accelerometers (http://qcn.stanford.edu/; last accessed December 2014). Sensors based on Micro‐Electromechanical Systems (MEMS) technology have rapidly improved over the last few years due to the demand of the private sector (e.g., automobiles, cell phones, and laptops). For strong‐motion applications, low‐cost MEMS accelerometers have promising features due to an increasing resolution and near‐linear phase and amplitude response ( Cochran, Lawrence, Christensen, and Jakka, 2009 ; Clayton et al. , 2011 ; Evans et al. , 2014 ). Each volunteer computer monitors ground motion and communicates using the Berkeley Open Infrastructure for Network Computing (BOINC, Anderson, 2004 ). Using a standard short‐term average, long‐term average (STLA) algorithm ( Earle and Shearer, 1994 ; Cochran, Lawrence, Christensen, Chung, 2009 ; Cochran, Lawrence, Christensen, and Jakka, 2009 ), volunteer computer and sensor systems detect abrupt changes in the acceleration recordings. Each time a possible trigger signal is declared, a small package of information containing sensor and ground‐motion information is streamed to one of the QCN servers ( Chung et al. , 2011 ). Trigger signals, correlated in space and time, are then processed by the QCN server to look for potential earthquakes.

Seismological Research Letters

How a national vegetation classification can help ecological research and management

The elegance of classification lies in its ability to compile and systematize various terminological conventions and masses of information that are unattainable during typical research projects. Imagine a discipline without standards for collection, analysis, and interpretation; unfortunately, that describes much of 20th-century vegetation ecology. With differing methods, how do we assess community dynamics over decades, much less centuries? How do we compare plant communities from different areas? The need for a widely applied vegetation classification has long been clear. Now imagine a multi-decade effort to assimilate hundreds of disparate vegetation classifications into one common classification for the US. In this letter, we introduce the US National Vegetation Classification (USNVC; www.usnvc.org) as a powerful tool for research and conservation, analogous to the argument made by Schimel and Chadwick (2013) for soils. The USNVC provides a national framework to classify and describe vegetation; here we describe the USNVC and offer brief examples of its efficacy.

Frontiers in Ecology and the Environment

Scaling relation between earthquake magnitude and the departure time from P wave similar growth

We introduce a new scaling relation between earthquake magnitude ( M ) and a characteristic of initial P wave displacement. By examining Japanese K-NET data averaged in bins partitioned by M w and hypocentral distance, we demonstrate that the P wave displacement briefly displays similar growth at the onset of rupture and that the departure time ( T dp ), which is defined as the time of departure from similarity of the absolute displacement after applying a band-pass filter, correlates with the final M in a range of 4.5 ≤ M w ≤ 7. The scaling relation between M w and T dp implies that useful information on the final M can be derived while the event is still in progress because T dp occurs before the completion of rupture. We conclude that the scaling relation is important not only for earthquake early warning but also for the source physics of earthquakes.

Geophysical Research Letters