Search USGSSearch

SEARCH · Search USGS

Results for “Meteorological Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Time-dependence of sea-ice concentration and multiyear ice fraction in the Arctic Basin

The time variation of the sea-ice concentration and multiyear ice fraction within the pack ice in the Arctic Basin is examined, using microwave images of sea ice recently acquired by the Nimbus-5 spacecraft and the NASA CV-990 airborne laboratory. The images used for these studies were constructed from data acquired from the Electrically Scanned Microwave Radiometer (ESMR) which records radiation from earth and its atmosphere at a wavelength of 1.55 cm. Data are analyzed for four seasons during 1973-1975 to illustrate some basic differences in the properties of the sea ice during those times. Spacecraft data are compared with corresponding NASA CV-990 airborne laboratory data obtained over wide areas in the Arctic Basin during the Main Arctic Ice Dynamics Joint Experiment (1975) to illustrate the applicability of passive-microwave remote sensing for monitoring the time dependence of sea-ice concentration (divergence). These observations indicate significant variations in the sea-ice concentration in the spring, late fall and early winter. In addition, deep in the interior of the Arctic polar sea-ice pack, heretofore unobserved large areas, several hundred kilometers in extent, of sea-ice concentrations as low as 50% are indicated. ?? 1978 D. Reidel Publishing Company.

Boundary-Layer Meteorology

Coastal Salinity Index along the southeastern Atlantic coast and the Gulf of Mexico, 1983 to 2018

Coastal droughts have a different dynamic than upland droughts, which are typically characterized by agricultural, hydrologic, meteorological, and (or) socioeconomic effects. Drought uniquely affects coastal ecosystems because of changes in the salinity conditions of estuarine creeks and rivers. The location of the freshwater-saltwater interface in surface-water bodies is an important factor in the ecological and socioeconomic dynamics of coastal communities. To address the data and information gap for characterizing coastal drought, the Coastal Salinity Index (CSI) was developed by using salinity data. The CSI uses a computational approach similar to the Standardized Precipitation Index. The CSI can be computed for unique time intervals (for example 1-, 6-, 12-, and 24-month intervals) to characterize short- and long-term drought (saline) conditions, as well as wet (high freshwater inflow) conditions. To encourage the use of the CSI in current and future research endeavors, this investigation addressed three activities to enhance the use and application of the CSI. First, a software package was developed for the consistent computation of the CSI that includes preprocessing of salinity data, filling missing data, computing the CSI, post-processing, and generating the supporting metadata. This software package is available for download from the U.S. Geological Survey GitLab repository. Second, the CSI has been computed at sites along the southeastern Atlantic coast (Florida to North Carolina) and the Gulf of Mexico (Texas to Florida) to increase the opportunity for linking the CSI to ecological response data. Third, using telemetered salinity data, the real-time computation of the CSI has been prototyped and disseminated on the web.

Alabama, Florida, Georgia, Louisiana, Mississippi,

Engaging the user community for advancing societal applications of the Surface Water Ocean Topography mission

Scheduled for launch in 2021, the Surface Water and Ocean Topography (SWOT) mission will be a truly unique mission that will provide high-temporal-frequency maps of surface water extents and elevation variations of global water bodies (lakes/reservoirs, rivers, estuaries, oceans, and sea ice) at higher spatial resolution than is available with current technologies (Biancamaria et al. 2016; Alsdorf et al. 2007). The primary instrument on SWOT is based on a Ka-band radar interferometer (KaRIN), which uses radar interferometery technology. The satellite will fly two radar antennas at either end of a 10-m (33 ft) mast, allowing it to measure the elevation of the surface along a 120-km (75 mi)-wide swath below. The availability of high-frequency and high-resolution maps of elevations and extents for surface water bodies and oceans will present unique opportunities to address numerous societally relevant challenges around the globe (Srinivasan et al. 2015). These opportunities may include such diverse and far-ranging applications as fisheries management, flood inundation mapping/risk mitigation/forecasting, wildlife conservation, global data assimilation for improving forecast of ocean tides and weather, reservoir management, climate change impacts and adaptation, and river discharge estimation, among others. Although SWOT is a research mission and not scheduled for launch for another 4 years, there is a need to build engagement within the application community now and to explore how best to advance the societal relevance and benefits of the SWOT mission from concept to reality. The SWOT Applications Working Group organized a workshop on 5–6 April 2017 at the U.S. Geological Survey (USGS) headquarters in Reston, Virginia. The goal of the workshop was to understand and communicate how the applications community can use SWOT data to address problems of profound societal relevance.

Bulletin of the American Meteorological Society

Investigating the atmospheric conditions associated with impactful shallow landslides in California (USA)

Shallow landslides are often triggered during rainfall events, which can increase subsurface soil water pressure and destabilize hillslopes. The likelihood of regional shallow landslide initiation is often assessed through a comparison of rainfall intensity and duration to pre-established thresholds. While informative for landslide warning, this exclusive focus on rainfall exceeding thresholds does not consider the meteorological conditions producing the rainfall. Here, we ask the question, are there common meteorological characteristics that lead to landslide-triggering precipitation? We develop a catalog of 18 post-1995 widespread, impactful shallow landslide events occurring within 13 storms across California, USA, where initiation time could be constrained to a ≤6-h window. We examine storm characteristics during the landslide initiation window using atmospheric reanalysis products, radar observations, and quantitative precipitation estimates. We find that, while there are some common atmospheric characteristics across landslide events, they can occur under a range of atmospheric conditions. For example, all Northern California landslide events assessed are associated with moderate to strong atmospheric rivers (ARs), while Southern California landslides feature non-AR to strong AR conditions. The storm events evaluated herein share many characteristics of hydrologically important storms in California that did not necessarily result in landslides; thus, atmospheric characteristics alone may not be sufficient to determine whether landslides will occur. However, documenting the characteristics of landslide-triggering storms defines the conditions under which landslides tend to occur, provides analog events that can be useful in forecast applications, helps define future research directions relating to atmospheric conditions and landslides, and supports interdisciplinary research efforts.

California

Western Mineral and Environmental Resources Science Center--providing comprehensive earth science for complex societal issues

Minerals in the environment and products manufactured from mineral materials are all around us and we use and come into contact with them every day. They impact our way of life and the health of all that lives. Minerals are critical to the Nation's economy and knowing where future mineral resources will come from is important for sustaining the Nation's economy and national security. The U.S. Geological Survey (USGS) Mineral Resources Program (MRP) provides scientific information for objective resource assessments and unbiased research results on mineral resource potential, production and consumption statistics, as well as environmental consequences of mining. The MRP conducts this research to provide information needed for land planners and decisionmakers about where mineral commodities are known and suspected in the earth's crust and about the environmental consequences of extracting those commodities. As part of the MRP scientists of the Western Mineral and Environmental Resources Science Center (WMERSC or 'Center' herein) coordinate the development of national, geologic, geochemical, geophysical, and mineral-resource databases and the migration of existing databases to standard models and formats that are available to both internal and external users. The unique expertise developed by Center scientists over many decades in response to mineral-resource-related issues is now in great demand to support applications such as public health research and remediation of environmental hazards that result from mining and mining-related activities. Western Mineral and Environmental Resources Science Center Results of WMERSC research provide timely and unbiased analyses of minerals and inorganic materials to (1) improve stewardship of public lands and resources; (2) support national and international economic and security policies; (3) sustain prosperity and improve our quality of life; and (4) protect and improve public health, safety, and environmental quality. The MRP supports approximately 40 USGS research specialists who utilize cooperative agreements with universities, industry, and other governmental agencies to support their collaborative research and information exchange. Scientists of the WMERSC study how and where non-fuel mineral resources form and are concentrated in the earth's crust, where mineral resources might be found in the future, and how mineral materials interact with the environment to affect human and ecosystem health. Natural systems (ecosystems) are complex - our understanding of how ecosystems operate requires collecting and synthesizing large amounts of geologic, geochemical, biologic, hydrologic, and meteorological information. Scientists in the Center strive to understand the interplay of various processes and how they affect the structure, composition, and health of ecosystems. Such understanding, which is then summarized in publicly available reports, is used to address and solve a wide variety of issues that are important to society and the economy. WMERSC scientists have extensive national and international experience in these scientific specialties and capabilities - they have collaborated with many Federal, State, and local agencies; with various private sector organizations; as well as with foreign countries and organizations. Nearly every scientific and societal challenge requires a different combination of scientific skills and capabilities. With their breadth of scientific specialties and capabilities, the scientists of the WMERSC can provide scientifically sound approaches to a wide range of societal challenges and issues. The following sections describe examples of important issues that have been addressed by scientists in the Center, the methods employed, and the relevant conclusions. New directions are inevitable as societal needs change over time. Scientists of the WMERSC have a diverse set of skills and capabilities and are proficient in the collection and integration of

Circular

Lake Michigan Diversion Accounting land cover change estimation by use of the National Land Cover Dataset and raingage network partitioning analysis

The U.S. Army Corps of Engineers (USACE), Chicago District, is responsible for monitoring and computation of the quantity of Lake Michigan water diverted by the State of Illinois. As part of this effort, the USACE uses the Hydrological Simulation Program–FORTRAN (HSPF) with measured meteorological data inputs to estimate runoff from the Lake Michigan diversion special contributing areas (SCAs), the North Branch Chicago River above Niles and the Little Calumet River above South Holland gaged basins, and the Lower Des Plaines and the Calumet ungaged that historically drained to Lake Michigan. These simulated runoffs are used for estimating the total runoff component from the diverted Lake Michigan watershed, which is accountable to the total diversion by the State of Illinois. The runoff is simulated from three interpreted land cover types in the HSPF models: impervious, grass, and forest. The three land cover data types currently in use were derived from aerial photographs acquired in the early 1990s. This study used the National Land Cover Dataset (NLCD) and developed an automated process for determining the area of the three land cover types, thereby allowing faster updating of future models, and for evaluating land cover changes by use of historical NLCD datasets. The study also carried out a raingage partitioning analysis so that the segmentation of land cover and rainfall in each modeled unit is directly applicable to the HSPF modeling. Historical and existing impervious, grass, and forest land acreages partitioned by percentages covered by two sets of raingages for the Lake Michigan diversion SCAs, gaged basins, and ungaged basins are presented.

Illinois

Using the precipitation-runoff modeling system to predict seasonal water availability in the upper Klamath River basin, Oregon and California

Accurate forecasts of the streamflow expected during late spring and summer in the Upper Klamath River Basin in southern-central Oregon and northern California are used by water management agencies to balance water allocations for agriculture, aquatic habitat, and hydropower-production needs. Streamflow forecasts are also used by irrigation farmers for planning. The forecasts are typically made twice a month starting as early in the water year as December. Multiple regression equations relating real-time snowpack and precipitation conditions to seasonal streamflow volumes have been used for many years in forecasting. However, with warming temperature trends and lower snowpack, such forecasts based on historical data could become less reliable in the future. If the timing and relation of snowpack and precipitation are outside of the range of the historical data used to create the equations, the forecasts become extrapolations. Statistical forecast equations are also limited in their ability to forecast streamflow in groundwater-dominated basins having inter-annual lag. As an additional method for seasonal streamflow forecasting, a physical-process-based hydrologic model employing the Precipitation-Runoff Modeling System (PRMS) was developed in cooperation with the U.S. Bureau of Reclamation for the Upper Klamath Basin in this study. The model was calibrated for the portion of the basin draining into Upper Klamath Lake. PRMS is a deterministic, distributed-parameter, physical-process-based modeling system developed by the U.S. Geological Survey. It simulates daily streamflow, snow, solar radiation, evapotranspiration, surface-water, and groundwater processes within the basin. A model calibration and validation period for water years 2000–15 and water years 1984–99, respectively, was used. The model was calibrated and validated using measured streamflow, snowpack, evapotranspiration, and solar radiation data sets. Interpolated daily precipitation and air temperature data from 32 meteorological stations within and surrounding the Upper Klamath Basin were used as model input. Performance statistics, used to evaluate how well simulated daily streamflow matched with measured streamflow included percent bias, percent relative error, and root-mean-square error. The statistics were computed annually, monthly, for October–March, and for April–September. With the exception of the October–March period, percent bias statistics were all within plus or minus 5-percent for both the calibration and validation periods. Limitations to using the model are error in the precipitation and air temperature input time series data, which include measurement error and error in the spatial interpolation method. Other errors include measured daily streamflow data, which were adjusted for consumptive use losses to make them more closely resemble natural streamflow for calibration. The model developed for the Upper Klamath Basin can be used to forecast streamflow from the Sprague and Williamson River Basins and inflow to Upper Klamath Lake. Reliable forecasts at these locations are needed for managing water for irrigation, ecosystem health, and power production. Using the models in a forecast application requires assembling model input data sets of anticipated daily precipitation and minimum and maximum air temperature for the period after the date the forecast is made and the end of the forecasted period. These climate data sets can be based on historical or synthetic records, at the discretion of the forecaster. With the Ensemble Streamflow Prediction method, a suite of streamflow scenarios is simulated using multiple years of climate data as model input. The forecasted streamflow is determined from knowing the exceedance probabilities of the simulated streamflows. In this study, the model and the Ensemble Streamflow Prediction method were used to forecast the volume of inflow to Upper Klamath Lake for a 6-month period from April 1, 2015, to September 30, 2015, using a range of climate data sets based on El Niño Southern Oscillation (ENSO) criteria. Because 2015 was a warm phase ENSO period, climate data for 10 warm phase ENSO years from 1980 to 2010 were used as input to the model. The simulated April–September 2015 UKL inflow volume based on measured 2015 climate data was 482,000 acre-feet, which was very close to the 50th percent exceedance probability computed from 10 simulated scenarios that used warm phase ENSO climate input data from 1980–2010.

California, Oregon

A nowcast model for tides and tidal currents in San Francisco Bay, California

National Oceanographic and Atmospheric Administration (NOAA) installed Physical Oceanographic Real-Time System (PORTS) in San Francisco Bay, California to provide observations of tides, tidal currents, and meteorological conditions. PORTS data are used for optimizing vessel operations, increasing margin of safety for navigation, and guiding hazardous material spill prevention and response. Because tides and tidal currents in San Francisco Bay are extremely complex, limited real-time observations are insufficient to provide spatial resolution for variations of tides and tidal currents. To fill the information gaps, a highresolution, robust, semi-implicit, finite-difference nowcast numerical model has been implemented for San Francisco Bay. The model grid and water depths are defined on coordinates based on Mercator projection so the model outputs can be directly superimposed on navigation charts. A data assimilation algorithm has been established to derive the boundary conditions for model simulations. The nowcast model is executed every hour continuously for tides and tidal currents starting from 24 hours before the present time (now) covering a total of 48 hours simulation. Forty-eight hours of nowcast model results are available to the public at all times through the World Wide Web (WWW). Users can view and download the nowcast model results for tides and tidal current distributions in San Francisco Bay for their specific applications and for further analysis.

California

Improving the operational simplified surface energy balance evapotranspiration model using the forcing and normalizing operation

Actual evapotranspiration modeling is providing useful information for researchers and resource managers in agriculture and water resources around the world. The performance of models depends on the accuracy of forcing inputs and model parameters. We developed an improved approach to the parameterization of the Operational Simplified Surface Energy Balance (SSEBop) model using the Forcing and Normalizing Operation (FANO). SSEBop has two key model parameters that define the model boundary conditions. The FANO algorithm computes the wet-bulb boundary condition using a linear FANO Equation relating surface temperature, surface psychrometric constant, and the Normalized Difference Vegetation Index (NDVI). The FANO parameterization was implemented on two computing platforms using Landsat and gridded meteorological datasets: (1) Google Earth Engine (GEE) and (2) Earth Resources Observation and Science (EROS) Center Science Processing Architecture (ESPA). Evaluation was conducted by comparing modeled actual evapotranspiration ( ETa ) estimates with AmeriFlux eddy covariance (EC) and water balance ETa from level-8 Hydrologic Unit Code sub-basins in the conterminous United States. FANO brought substantial improvements in model accuracy and operational implementation. Compared to the earlier version (v0.1.7), SSEBop FANO (v0.2.6) reduced grassland bias from 47% to −2% while maintaining comparable bias for croplands (11% versus −7%) against EC data. A water balance-based ETa bias evaluation showed an overall improvement from 7% to −1%. Climatology versus annual gridded reference evapotranspiration ( ETr ) produced comparable ETa results, justifying the use of climatology ETr for the global SSEBop Landsat ETa that is accessible through the ESPA website. Besides improvements in model accuracy, SSEBop FANO increases the spatiotemporal coverage of ET modeling due to the elimination of high NDVI requirements for model parameterization. Because of the existence of potential biases from forcing inputs and model parameters, continued evaluation and bias corrections are necessary to improve the absolute magnitude of ETa for localized water budget applications.

Remote Sensing

Quantification of precipitation measurement discontinuity induced by wind shields on national gauges

Various combinations of wind shields and national precipitation gauges commonly used in countries of the northern hemisphere have been studied in this paper, using the combined intercomparison data collected at 14 sites during the World Meteorological Organization's (WMO) Solid Precipitation Measurement Intercomparison Project. The results show that wind shields improve gauge catch of precipitation, particularly for snow. Shielded gauges, on average, measure 20–70% more snow than unshielded gauges. Without a doubt, the use of wind shields on precipitation gauges has introduced a significant discontinuity into precipitation records, particularly in cold and windy regions. This discontinuity is not constant and it varies with wind speed, temperature, and precipitation type. Adjustment for this discontinuity is necessary to obtain homogenous precipitation data for climate change and hydrological studies. The relation of the relative catch ratio (RCR, ratio of measurements of shielded gauge to unshielded gauge) versus wind speed and temperature has been developed for Alter and Tretyakov wind shields. Strong linear relations between measurements of shielded gauge and unshielded gauge have also been found for different precipitation types. The linear relation does not fully take into account the varying effect of wind and temperature on gauge catch. Overadjustment by the linear relation may occur at those sites with lower wind speeds, and underadjustment may occur at those stations with higher wind speeds. The RCR technique is anticipated to be more applicable in a wide range of climate conditions. The RCR technique and the linear relation have been tested at selected WMO intercomparison stations, and reasonable agreement between the adjusted amounts and the shielded gauge measurements was obtained at most of the sites. Test application of the developed methodologies to a regional or national network is therefore recommended to further evaluate their applicability in different climate conditions. Significant increase of precipitation is expected due to the adjustment particularly in high latitudes and other cold regions. This will have a meaningful impact on climate variation and change analyses.

Water Resources Research

Vegetation index methods for estimating evapotranspiration by remote sensing

Evapotranspiration (ET) is the largest term after precipitation in terrestrial water budgets. Accurate estimates of ET are needed for numerous agricultural and natural resource management tasks and to project changes in hydrological cycles due to potential climate change. We explore recent methods that combine vegetation indices (VI) from satellites with ground measurements of actual ET (ETa) and meteorological data to project ETa over a wide range of biome types and scales of measurement, from local to global estimates. The majority of these use time-series imagery from the Moderate Resolution Imaging Spectrometer on the Terra satellite to project ET over seasons and years. The review explores the theoretical basis for the methods, the types of ancillary data needed, and their accuracy and limitations. Coefficients of determination between modeled ETa and measured ETa are in the range of 0.45–0.95, and root mean square errors are in the range of 10–30% of mean ETa values across biomes, similar to methods that use thermal infrared bands to estimate ETa and within the range of accuracy of the ground measurements by which they are calibrated or validated. The advent of frequent-return satellites such as Terra and planed replacement platforms, and the increasing number of moisture and carbon flux tower sites over the globe, have made these methods feasible. Examples of operational algorithms for ET in agricultural and natural ecosystems are presented. The goal of the review is to enable potential end-users from different disciplines to adapt these methods to new applications that require spatially-distributed ET estimates.

Surveys in Geophysics

Determining seasonal recharge, storage changes, and specific yield using repeat microgravity and water-level measurements in the Mesilla Basin alluvial aquifer, New Mexico, 2016–2018

Increasing water demand and multi-year drought conditions within the Mesilla/Conejos-Médanos Basin near the New Mexico-Texas- Chihuahua border have resulted in diminished surface-water supplies and increased groundwater withdrawals. To better understand recharge to the shallow aquifer, the spatial and temporal groundwater storage changes, and the variability of specific yield (Sy) in the aquifer, seasonal groundwater elevation and repeat microgravity measurements were made during the irrigation release and non-release seasons of 2016, 2017, and 2018 at a network of locations near Las Cruces, New Mexico. The data collected during this investigation were able to capture seasonal change in groundwater elevations and storage from various sources of recharge at multiple sites in the shallow aquifer. Seasonal recharge in the study area was attributed to streamflow, the application and conveyance of irrigation water, and large or sustained precipitation events. However, increasing groundwater gradients in recent decades between piezometers close to the river and those more than a kilometer from the river suggests that recharge from river seepage has become localized at the seasonal scale. Overall, there was a net increase in storage of almost 8.4 cubic hectometers in the study reach between the start and end of the study, largely following the increased surface-water availability and above average precipitation in 2017. Specific yield, estimated by comparing the groundwater-level changes and storage changes at six sites in the study area, ranged from 0.14 (+/− 0.05) to 0.30 (+/− 0.06), which is slightly greater than previously reported estimates (0.10 to 0.25), but still within the error of the estimates. Most of the variability in the estimated storage change, that was not well-correlated with groundwater elevation change, is thought to be from soil moisture in the unsaturated zone. This investigation demonstrates the value of adding repeat microgravity measurements to conventional groundwater monitoring to better understand the sources and extent of recharge as well as the variability of Sy in the aquifer. Continued monitoring, under a variety of available surface water and meteorological conditions, could provide a more comprehensive understanding of the water budget and reduce the specific yield estimation uncertainty. Evaluating water-levels and storage conditions prior to, and following, local recharge events may help managers identify threshold conditions for aquifer storage depletions and recoveries.

New Mexico

Operationalizing crop model data assimilation for improved on-farm situational awareness

The ability of ‘digital agriculture’ to support on-farm decision making is predicated on the real-time combination of observations and prior knowledge into an integrated digital environment. The mathematical discipline that seeks to provide this integration is known as model data assimilation (DA), with demonstrated benefits including improved predictive reliability, and the capacity to identify unexpected changes in field conditions and potential measurement errors. Despite routine adoption in other fields, the delayed adoption of DA in agriculture is due to the need to express end-of-season outcomes such as yield, update forecasts of these outcomes throughout the growing season as data become available, and enhance forecast reliability. To overcome these challenges, three guiding principles are introduced, providing a means to operationalize crop model DA for robust on-farm decision support. We apply the guiding principles using a South Australian viticulture case study. Our case study involves application of an iterative form of a widely used DA algorithm (ensemble Kalman filter) to dynamically update both static parameters and states associated with a grapevine simulation model. Daily weather data as well as fortnightly ground-based leaf area index (LAI) data are used for assimilation. It is shown how crop model DA can lead to not only significant improvements in forecasts of LAI but also to forecasts of end-of-season yield. The guiding principles also enable observations of greatest value to be identified throughout the season. This study highlights the role that formal crop model DA can play in agricultural decision support through enhancing situational awareness in real time.

Agricultural and Forest Meteorology

Establishing the Antarctic Dome C community reference standard site towards consistent measurements from Earth observation satellites

Establishing satellite measurement consistency by using common desert sites has become increasingly more important not only for climate change detection but also for quantitative retrievals of geophysical variables in satellite applications. Using the Antarctic Dome C site (75°06′S, 123°21′E, elevation 3.2 km) for satellite radiometric calibration and validation (Cal/Val) is of great interest owing to its unique location and characteristics. The site surface is covered with uniformly distributed permanent snow, and the atmospheric effect is small and relatively constant. In this study, the long-term stability and spectral characteristics of this site are evaluated using well-calibrated satellite instruments such as the Moderate Resolution Imaging Spectroradiometer (MODIS) and Sea-viewing Wide Field-of-view Sensor (SeaWiFS). Preliminary results show that despite a few limitations, the site in general is stable in the long term, the bidirectional reflectance distribution function (BRDF) model works well, and the site is most suitable for the Cal/Val of reflective solar bands in the 0.4–1.0 µm range. It was found that for the past decade, the reflectivity change of the site is within 1.35% at 0.64 µm, and interannual variability is within 2%. The site is able to resolve calibration biases between instruments at a level of ~1%. The usefulness of the site is demonstrated by comparing observations from seven satellite instruments involving four space agencies, including OrbView-2–SeaWiFS, Terra–Aqua MODIS, Earth Observing 1 (EO-1) – Hyperion, Meteorological Operational satellite programme (MetOp) – Advanced Very High Resolution Radiometer (AVHRR), Envisat Medium Resolution Imaging Spectrometer (MERIS) – dvanced Along-Track Scanning Radiometer (AATSR), and Landsat 7 Enhanced Thematic Mapper Plus (ETM+). Dome C is a promising candidate site for climate quality calibration of satellite radiometers towards more consistent satellite measurements, as part of the framework for climate change detection and data quality assurance for the Global Earth Observation System of Systems (GEOSS).

Canadian Journal of Remote Sensing

Basis for technical guidance to evaluate evapotranspiration covers

This report provides technical guidance to evaluate evapotranspiration (ET) cover design criteria with emphasis on applications to long-term disposal sites such as Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) sites. Water balance covers, also known as ET covers, reduce percolation by storing precipitation then allowing vegetation to cycle it back to the atmosphere. For long-term (over 200 years) waste isolation, ET covers may provide significant benefits over conventional, resistive covers that rely on engineered components, such as compacted clay barriers and geomembranes, to divert precipitation. UMTRCA covers were designed to impede and attenuate radioactive radon-222 gas flux from the underlying tailings, while minimizing percolation of any contaminants to groundwater. Such covers have implicit regulatory compliance post-construction. Alternative cover systems, such as ET covers, must explicitly meet some anticipated performance, and demonstrate beneficial use. While all engineered structures will change over time, an ET cover evolves with nature rather than resisting it, which may perpetuate a more reliable waste isolation system. For example, UMTRCA sites must provide safe and environmentally sound disposal, long-term stabilization, and control of uranium mill tailings and remain effective for up to 1,000 years, to the extent reasonably achievable, and, in any case, for at least 200 years. UMTRCA covers rely on the engineered properties to meet regulatory requirements during and immediately after construction. Subsequent compliance is implicit in the design. The design of an ET cover is far more dependent on mesoscale meteorology, native vegetation, and edaphic soil properties which are site-specific. Therefore, the design and anticipated performance of an ET cover must be demonstrated through a combination of modeling, natural analogues and pilot studies, and then verified with monitoring data. There is no single ET cover design that can likely meet performance standards across different climates, available soils, and vegetation. The technical information presented in this report reviews guidelines and performance criteria commonly used for ET covers at municipal waste facilities and the consideration factors of such covers to meet the regulatory requirements at long-term disposal sites.

Report

Airflows and turbulent flux measurements in mountainous terrain: Part 1. Canopy and local effects

We have studied the effects of local topography and canopy structure on turbulent flux measurements at a site located in mountainous terrain within a subalpine, coniferous forest. Our primary aim was to determine whether the complex terrain of the site affects the accuracy of eddy flux measurements from a practical perspective. We observed displacement heights, roughness lengths, spectral peaks, turbulent length scales, and profiles of turbulent intensities that were comparable in magnitude and pattern to those reported for forest canopies in simpler terrain. We conclude that in many of these statistical measures, the local canopy exerts considerably more influence than does topographical complexity. Lack of vertical flux divergence and modeling suggests that the flux footprints for the site are within the standards acceptable for the application of flux statistics. We investigated three different methods of coordinate rotation: double rotation (DR), triple rotation (TR), and planar-fit rotation (PF). Significant variability in rotation angles at low wind speeds was encountered with the commonly used DR and TR methods, as opposed to the PF method, causing some overestimation of the fluxes. However, these differences in fluxes were small when applied to large datasets involving sensible heat and CO 2 fluxes. We observed evidence of frequent drainage flows near the ground during stable, stratified conditions at night. Concurrent with the appearance of these flows, we observed a positive bias in the mean vertical wind speed, presumably due to subtle topographic variations inducing a flow convergence below the measurement sensors. In the presence of such drainage flows, advection of scalars and non-zero bias in the mean vertical wind speed can complicate closure of the mass conservation budget at the site.

Agricultural and Forest Meteorology

A method for simulating transient ground-water recharge in deep water-table settings in central Florida by using a simple water-balance/transfer-function model

A relatively simple method is needed that provides estimates of transient ground-water recharge in deep water-table settings that can be incorporated into other hydrologic models. Deep water-table settings are areas where the water table is below the reach of plant roots and virtually all water that is not lost to surface runoff, evaporation at land surface, or evapotranspiration in the root zone eventually becomes ground-water recharge. Areas in central Florida with a deep water table generally are high recharge areas; consequently, simulation of recharge in these areas is of particular interest to water-resource managers. Yet the complexities of meteorological variations and unsaturated flow processes make it difficult to estimate short-term recharge rates, thereby confounding calibration and predictive use of transient hydrologic models. A simple water-balance/transfer-function (WBTF) model was developed for simulating transient ground-water recharge in deep water-table settings. The WBTF model represents a one-dimensional column from the top of the vegetative canopy to the water table and consists of two components: (1) a water-balance module that simulates the water storage capacity of the vegetative canopy and root zone; and (2) a transfer-function module that simulates the traveltime of water as it percolates from the bottom of the root zone to the water table. Data requirements include two time series for the period of interest?precipitation (or precipitation minus surface runoff, if surface runoff is not negligible) and evapotranspiration?and values for five parameters that represent water storage capacity or soil-drainage characteristics. A limiting assumption of the WBTF model is that the percolation of water below the root zone is a linear process. That is, percolating water is assumed to have the same traveltime characteristics, experiencing the same delay and attenuation, as it moves through the unsaturated zone. This assumption is more accurate if the moisture content, and consequently the unsaturated hydraulic conductivity, below the root zone does not vary substantially with time. Results of the WBTF model were compared to those of the U.S. Geological Survey variably saturated flow model, VS2DT, and to field-based estimates of recharge to demonstrate the applicability of the WBTF model for a range of conditions relevant to deep water-table settings in central Florida. The WBTF model reproduced independently obtained estimates of recharge reasonably well for different soil types and water-table depths.

Scientific Investigations Report

Estimating millet production for famine early warning: An application of crop simulation modelling using satellite and ground-based data in Burkina Faso

Early warning of impending poor crop harvests in highly variable environments can allow policy makers the time they need to take appropriate action to ameliorate the effects of regional food shortages on vulnerable rural and urban populations. Crop production estimates for the current season can be obtained using crop simulation models and remotely sensed estimates of rainfall in real time, embedded in a geographic information system that allows simple analysis of simulation results. A prototype yield estimation system was developed for the thirty provinces of Burkina Faso. It is based on CERES-Millet, a crop simulation model of the growth and development of millet ( Pennisetum spp.). The prototype was used to estimate millet production in contrasting seasons and to derive production anomaly estimates for the 1986 season. Provincial yields simulated halfway through the growing season were generally within 15% of their final (end-of-season) values. Although more work is required to produce an operational early warning system of reasonable credibility, the methodology has considerable potential for providing timely estimates of regional production of the major food crops in countries of sub-Saharan Africa.

Agricultural and Forest Meteorology